/** | |
****************************************************************************** | |
* @file stm32f3xx_hal_pcd_ex.h | |
* @author MCD Application Team | |
* @brief Header file of PCD HAL Extension module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32F3xx_HAL_PCD_EX_H | |
#define __STM32F3xx_HAL_PCD_EX_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
#if defined(STM32F302xE) || defined(STM32F303xE) || \ | |
defined(STM32F302xC) || defined(STM32F303xC) || \ | |
defined(STM32F302x8) || \ | |
defined(STM32F373xC) | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f3xx_hal_def.h" | |
/** @addtogroup STM32F3xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup PCDEx | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/* Exported macros -----------------------------------------------------------*/ | |
/** @defgroup PCDEx_Exported_Macros PCD Extended Exported Macros | |
* @{ | |
*/ | |
/** | |
* @brief Gets address in an endpoint register. | |
* @param USBx USB peripheral instance register address. | |
* @param bEpNum Endpoint Number. | |
* @retval None | |
*/ | |
#if defined(STM32F302xC) || defined(STM32F303xC) || \ | |
defined(STM32F373xC) | |
#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8)*2+ ((uint32_t)(USBx) + 0x400U))))) | |
#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+2)*2+ ((uint32_t)(USBx) + 0x400U))))) | |
#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+4)*2+ ((uint32_t)(USBx) + 0x400U))))) | |
#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+6)*2+ ((uint32_t)(USBx) + 0x400U))))) | |
#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\ | |
uint16_t *pdwReg =PCD_EP_RX_CNT((USBx),(bEpNum)); \ | |
PCD_SET_EP_CNT_RX_REG((pdwReg), (wCount))\ | |
} | |
#endif /* STM32F302xC || STM32F303xC || */ | |
/* STM32F373xC */ | |
#if defined(STM32F302xE) || defined(STM32F303xE) || \ | |
defined(STM32F302x8) | |
#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8)+ ((uint32_t)(USBx) + 0x400U))))) | |
#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+2)+ ((uint32_t)(USBx) + 0x400U))))) | |
#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+4)+ ((uint32_t)(USBx) + 0x400U))))) | |
#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((uint32_t)((((USBx)->BTABLE+(bEpNum)*8+6)+ ((uint32_t)(USBx) + 0x400U))))) | |
#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\ | |
uint16_t *pdwReg = PCD_EP_RX_CNT((USBx), (bEpNum));\ | |
PCD_SET_EP_CNT_RX_REG((pdwReg), (wCount))\ | |
} | |
#endif /* STM32F302xE || STM32F303xE || */ | |
/* STM32F302x8 */ | |
/** | |
* @} | |
*/ | |
/* Exported functions --------------------------------------------------------*/ | |
/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions | |
* @{ | |
*/ | |
/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions | |
* @{ | |
*/ | |
HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, | |
uint16_t ep_addr, | |
uint16_t ep_kind, | |
uint32_t pmaadress); | |
void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#endif /* STM32F302xE || STM32F303xE || */ | |
/* STM32F302xC || STM32F303xC || */ | |
/* STM32F302x8 || */ | |
/* STM32F373xC */ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32F3xx_HAL_PCD_EX_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |