/** | |
****************************************************************************** | |
* @file stm32f3xx_hal_flash.h | |
* @author MCD Application Team | |
* @brief Header file of Flash HAL module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32F3xx_HAL_FLASH_H | |
#define __STM32F3xx_HAL_FLASH_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f3xx_hal_def.h" | |
/** @addtogroup STM32F3xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup FLASH | |
* @{ | |
*/ | |
/** @addtogroup FLASH_Private_Constants | |
* @{ | |
*/ | |
#define FLASH_TIMEOUT_VALUE (50000U) /* 50 s */ | |
/** | |
* @} | |
*/ | |
/** @addtogroup FLASH_Private_Macros | |
* @{ | |
*/ | |
#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ | |
((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ | |
((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) | |
#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \ | |
((__LATENCY__) == FLASH_LATENCY_1) || \ | |
((__LATENCY__) == FLASH_LATENCY_2)) | |
/** | |
* @} | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** @defgroup FLASH_Exported_Types FLASH Exported Types | |
* @{ | |
*/ | |
/** | |
* @brief FLASH Procedure structure definition | |
*/ | |
typedef enum | |
{ | |
FLASH_PROC_NONE = 0U, | |
FLASH_PROC_PAGEERASE = 1U, | |
FLASH_PROC_MASSERASE = 2U, | |
FLASH_PROC_PROGRAMHALFWORD = 3U, | |
FLASH_PROC_PROGRAMWORD = 4U, | |
FLASH_PROC_PROGRAMDOUBLEWORD = 5U | |
} FLASH_ProcedureTypeDef; | |
/** | |
* @brief FLASH handle Structure definition | |
*/ | |
typedef struct | |
{ | |
__IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */ | |
__IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */ | |
__IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */ | |
__IO uint64_t Data; /*!< Internal variable to save data to be programmed */ | |
HAL_LockTypeDef Lock; /*!< FLASH locking object */ | |
__IO uint32_t ErrorCode; /*!< FLASH error code | |
This parameter can be a value of @ref FLASH_Error_Codes */ | |
} FLASH_ProcessTypeDef; | |
/** | |
* @} | |
*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup FLASH_Exported_Constants FLASH Exported Constants | |
* @{ | |
*/ | |
/** @defgroup FLASH_Error_Codes FLASH Error Codes | |
* @{ | |
*/ | |
#define HAL_FLASH_ERROR_NONE 0x00U /*!< No error */ | |
#define HAL_FLASH_ERROR_PROG 0x01U /*!< Programming error */ | |
#define HAL_FLASH_ERROR_WRP 0x02U /*!< Write protection error */ | |
/** | |
* @} | |
*/ | |
/** @defgroup FLASH_Type_Program FLASH Type Program | |
* @{ | |
*/ | |
#define FLASH_TYPEPROGRAM_HALFWORD (0x01U) /*!<Program a half-word (16-bit) at a specified address.*/ | |
#define FLASH_TYPEPROGRAM_WORD (0x02U) /*!<Program a word (32-bit) at a specified address.*/ | |
#define FLASH_TYPEPROGRAM_DOUBLEWORD (0x03U) /*!<Program a double word (64-bit) at a specified address*/ | |
/** | |
* @} | |
*/ | |
/** @defgroup FLASH_Latency FLASH Latency | |
* @{ | |
*/ | |
#define FLASH_LATENCY_0 (0x00000000U) /*!< FLASH Zero Latency cycle */ | |
#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One Latency cycle */ | |
#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two Latency cycles */ | |
/** | |
* @} | |
*/ | |
/** @defgroup FLASH_Flag_definition FLASH Flag definition | |
* @{ | |
*/ | |
#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ | |
#define FLASH_FLAG_PGERR FLASH_SR_PGERR /*!< FLASH Programming error flag */ | |
#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */ | |
#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */ | |
/** | |
* @} | |
*/ | |
/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition | |
* @{ | |
*/ | |
#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */ | |
#define FLASH_IT_ERR FLASH_CR_ERRIE /*!< Error Interrupt source */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macro ------------------------------------------------------------*/ | |
/** @defgroup FLASH_Exported_Macros FLASH Exported Macros | |
* @brief macros to control FLASH features | |
* @{ | |
*/ | |
/** @defgroup FLASH_Half_Cycle FLASH Half Cycle | |
* @brief macros to handle FLASH half cycle | |
* @{ | |
*/ | |
/** | |
* @brief Enable the FLASH half cycle access. | |
* @retval None | |
*/ | |
#define __HAL_FLASH_HALF_CYCLE_ACCESS_ENABLE() (FLASH->ACR |= FLASH_ACR_HLFCYA) | |
/** | |
* @brief Disable the FLASH half cycle access. | |
* @retval None | |
*/ | |
#define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA)) | |
/** | |
* @} | |
*/ | |
/** @defgroup FLASH_EM_Latency FLASH Latency | |
* @brief macros to handle FLASH Latency | |
* @{ | |
*/ | |
/** | |
* @brief Set the FLASH Latency. | |
* @param __LATENCY__ FLASH Latency | |
* This parameter can be one of the following values: | |
* @arg @ref FLASH_LATENCY_0 FLASH Zero Latency cycle | |
* @arg @ref FLASH_LATENCY_1 FLASH One Latency cycle | |
* @arg @ref FLASH_LATENCY_2 FLASH Two Latency cycles | |
* @retval None | |
*/ | |
#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__)) | |
/** | |
* @brief Get the FLASH Latency. | |
* @retval FLASH Latency | |
* This parameter can be one of the following values: | |
* @arg @ref FLASH_LATENCY_0 FLASH Zero Latency cycle | |
* @arg @ref FLASH_LATENCY_1 FLASH One Latency cycle | |
* @arg @ref FLASH_LATENCY_2 FLASH Two Latency cycles | |
*/ | |
#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) | |
/** | |
* @} | |
*/ | |
/** @defgroup FLASH_Prefetch FLASH Prefetch | |
* @brief macros to handle FLASH Prefetch buffer | |
* @{ | |
*/ | |
/** | |
* @brief Enable the FLASH prefetch buffer. | |
* @retval None | |
*/ | |
#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE) | |
/** | |
* @brief Disable the FLASH prefetch buffer. | |
* @retval None | |
*/ | |
#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE)) | |
/** | |
* @} | |
*/ | |
/** @defgroup FLASH_Interrupt FLASH Interrupts | |
* @brief macros to handle FLASH interrupts | |
* @{ | |
*/ | |
/** | |
* @brief Enable the specified FLASH interrupt. | |
* @param __INTERRUPT__ FLASH interrupt | |
* This parameter can be any combination of the following values: | |
* @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt | |
* @arg @ref FLASH_IT_ERR Error Interrupt | |
* @retval none | |
*/ | |
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) SET_BIT((FLASH->CR), (__INTERRUPT__)) | |
/** | |
* @brief Disable the specified FLASH interrupt. | |
* @param __INTERRUPT__ FLASH interrupt | |
* This parameter can be any combination of the following values: | |
* @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt | |
* @arg @ref FLASH_IT_ERR Error Interrupt | |
* @retval none | |
*/ | |
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) CLEAR_BIT((FLASH->CR), (uint32_t)(__INTERRUPT__)) | |
/** | |
* @brief Get the specified FLASH flag status. | |
* @param __FLAG__ specifies the FLASH flag to check. | |
* This parameter can be one of the following values: | |
* @arg @ref FLASH_FLAG_BSY FLASH Busy flag | |
* @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag | |
* @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag | |
* @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag | |
* @retval The new state of __FLAG__ (SET or RESET). | |
*/ | |
#define __HAL_FLASH_GET_FLAG(__FLAG__) (((FLASH->SR) & (__FLAG__)) == (__FLAG__)) | |
/** | |
* @brief Clear the specified FLASH flag. | |
* @param __FLAG__ specifies the FLASH flags to clear. | |
* This parameter can be any combination of the following values: | |
* @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag | |
* @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag | |
* @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag | |
* @retval none | |
*/ | |
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) ((FLASH->SR) = (__FLAG__)) | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Include FLASH HAL Extended module */ | |
#include "stm32f3xx_hal_flash_ex.h" | |
/* Exported functions --------------------------------------------------------*/ | |
/** @addtogroup FLASH_Exported_Functions | |
* @{ | |
*/ | |
/** @addtogroup FLASH_Exported_Functions_Group1 | |
* @{ | |
*/ | |
/* IO operation functions *****************************************************/ | |
HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); | |
HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); | |
/* FLASH IRQ handler function */ | |
void HAL_FLASH_IRQHandler(void); | |
/* Callbacks in non blocking modes */ | |
void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); | |
void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); | |
/** | |
* @} | |
*/ | |
/** @addtogroup FLASH_Exported_Functions_Group2 | |
* @{ | |
*/ | |
/* Peripheral Control functions ***********************************************/ | |
HAL_StatusTypeDef HAL_FLASH_Unlock(void); | |
HAL_StatusTypeDef HAL_FLASH_Lock(void); | |
HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); | |
HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); | |
HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); | |
/** | |
* @} | |
*/ | |
/** @addtogroup FLASH_Exported_Functions_Group3 | |
* @{ | |
*/ | |
/* Peripheral State and Error functions ***************************************/ | |
uint32_t HAL_FLASH_GetError(void); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private function -------------------------------------------------*/ | |
/** @addtogroup FLASH_Private_Functions | |
* @{ | |
*/ | |
HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32F3xx_HAL_FLASH_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ | |