| /** | |
| ****************************************************************************** | |
| * @file stm32f1xx_ll_usb.h | |
| * @author MCD Application Team | |
| * @version V1.1.1 | |
| * @date 12-May-2017 | |
| * @brief Header file of USB Low Layer HAL module. | |
| ****************************************************************************** | |
| * @attention | |
| * | |
| * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
| * | |
| * Redistribution and use in source and binary forms, with or without modification, | |
| * are permitted provided that the following conditions are met: | |
| * 1. Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * 3. Neither the name of STMicroelectronics nor the names of its contributors | |
| * may be used to endorse or promote products derived from this software | |
| * without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| ****************************************************************************** | |
| */ | |
| /* Define to prevent recursive inclusion -------------------------------------*/ | |
| #ifndef __STM32F1xx_LL_USB_H | |
| #define __STM32F1xx_LL_USB_H | |
| #ifdef __cplusplus | |
| extern "C" { | |
| #endif | |
| #if defined(STM32F102x6) || defined(STM32F102xB) || \ | |
| defined(STM32F103x6) || defined(STM32F103xB) || \ | |
| defined(STM32F103xE) || defined(STM32F103xG) || \ | |
| defined(STM32F105xC) || defined(STM32F107xC) | |
| /* Includes ------------------------------------------------------------------*/ | |
| #include "stm32f1xx_hal_def.h" | |
| /** @addtogroup STM32F1xx_HAL_Driver | |
| * @{ | |
| */ | |
| /** @addtogroup USB_LL | |
| * @{ | |
| */ | |
| /* Exported types ------------------------------------------------------------*/ | |
| /** @defgroup USB_LL_Exported_Types USB Low Layer Exported Types | |
| * @{ | |
| */ | |
| /** | |
| * @brief USB Mode definition | |
| */ | |
| typedef enum | |
| { | |
| USB_DEVICE_MODE = 0, | |
| USB_HOST_MODE = 1, | |
| USB_DRD_MODE = 2 | |
| }USB_ModeTypeDef; | |
| #if defined (USB_OTG_FS) | |
| /** | |
| * @brief URB States definition | |
| */ | |
| typedef enum { | |
| URB_IDLE = 0, | |
| URB_DONE, | |
| URB_NOTREADY, | |
| URB_NYET, | |
| URB_ERROR, | |
| URB_STALL | |
| }USB_OTG_URBStateTypeDef; | |
| /** | |
| * @brief Host channel States definition | |
| */ | |
| typedef enum { | |
| HC_IDLE = 0, | |
| HC_XFRC, | |
| HC_HALTED, | |
| HC_NAK, | |
| HC_NYET, | |
| HC_STALL, | |
| HC_XACTERR, | |
| HC_BBLERR, | |
| HC_DATATGLERR | |
| }USB_OTG_HCStateTypeDef; | |
| /** | |
| * @brief USB OTG Initialization Structure definition | |
| */ | |
| typedef struct | |
| { | |
| uint32_t dev_endpoints; /*!< Device Endpoints number. | |
| This parameter depends on the used USB core. | |
| This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ | |
| uint32_t Host_channels; /*!< Host Channels number. | |
| This parameter Depends on the used USB core. | |
| This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ | |
| uint32_t speed; /*!< USB Core speed. | |
| This parameter can be any value of @ref USB_Core_Speed_ */ | |
| uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. | |
| This parameter can be any value of @ref USB_EP0_MPS_ */ | |
| uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ | |
| uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ | |
| uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ | |
| uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ | |
| }USB_OTG_CfgTypeDef; | |
| typedef struct | |
| { | |
| uint8_t num; /*!< Endpoint number | |
| This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ | |
| uint8_t is_in; /*!< Endpoint direction | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ | |
| uint8_t is_stall; /*!< Endpoint stall condition | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ | |
| uint8_t type; /*!< Endpoint type | |
| This parameter can be any value of @ref USB_EP_Type_ */ | |
| uint8_t data_pid_start; /*!< Initial data PID | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ | |
| uint8_t even_odd_frame; /*!< IFrame parity | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ | |
| uint16_t tx_fifo_num; /*!< Transmission FIFO number | |
| This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ | |
| uint32_t maxpacket; /*!< Endpoint Max packet size | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ | |
| uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ | |
| uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ | |
| uint32_t xfer_len; /*!< Current transfer length */ | |
| uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ | |
| }USB_OTG_EPTypeDef; | |
| typedef struct | |
| { | |
| uint8_t dev_addr ; /*!< USB device address. | |
| This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ | |
| uint8_t ch_num; /*!< Host channel number. | |
| This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ | |
| uint8_t ep_num; /*!< Endpoint number. | |
| This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ | |
| uint8_t ep_is_in; /*!< Endpoint direction | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ | |
| uint8_t speed; /*!< USB Host speed. | |
| This parameter can be any value of @ref USB_Core_Speed_ */ | |
| uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ | |
| uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ | |
| uint8_t ep_type; /*!< Endpoint Type. | |
| This parameter can be any value of @ref USB_EP_Type_ */ | |
| uint16_t max_packet; /*!< Endpoint Max packet size. | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ | |
| uint8_t data_pid; /*!< Initial data PID. | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ | |
| uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ | |
| uint32_t xfer_len; /*!< Current transfer length. */ | |
| uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ | |
| uint8_t toggle_in; /*!< IN transfer current toggle flag. | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ | |
| uint8_t toggle_out; /*!< OUT transfer current toggle flag | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ | |
| uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ | |
| uint32_t ErrCnt; /*!< Host channel error count.*/ | |
| USB_OTG_URBStateTypeDef urb_state; /*!< URB state. | |
| This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ | |
| USB_OTG_HCStateTypeDef state; /*!< Host Channel state. | |
| This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ | |
| }USB_OTG_HCTypeDef; | |
| #endif /* USB_OTG_FS */ | |
| #if defined (USB) | |
| /** | |
| * @brief USB Initialization Structure definition | |
| */ | |
| typedef struct | |
| { | |
| uint32_t dev_endpoints; /*!< Device Endpoints number. | |
| This parameter depends on the used USB core. | |
| This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ | |
| uint32_t speed; /*!< USB Core speed. | |
| This parameter can be any value of @ref USB_Core_Speed */ | |
| uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. | |
| This parameter can be any value of @ref USB_EP0_MPS */ | |
| uint32_t phy_itface; /*!< Select the used PHY interface. | |
| This parameter can be any value of @ref USB_Core_PHY */ | |
| uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ | |
| uint32_t low_power_enable; /*!< Enable or disable Low Power mode */ | |
| uint32_t lpm_enable; /*!< Enable or disable Battery charging. */ | |
| uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ | |
| } USB_CfgTypeDef; | |
| typedef struct | |
| { | |
| uint8_t num; /*!< Endpoint number | |
| This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ | |
| uint8_t is_in; /*!< Endpoint direction | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ | |
| uint8_t is_stall; /*!< Endpoint stall condition | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ | |
| uint8_t type; /*!< Endpoint type | |
| This parameter can be any value of @ref USB_EP_Type */ | |
| uint16_t pmaadress; /*!< PMA Address | |
| This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ | |
| uint16_t pmaaddr0; /*!< PMA Address0 | |
| This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ | |
| uint16_t pmaaddr1; /*!< PMA Address1 | |
| This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ | |
| uint8_t doublebuffer; /*!< Double buffer enable | |
| This parameter can be 0 or 1 */ | |
| uint16_t tx_fifo_num; /*!< This parameter is not required by USB Device FS peripheral, it is used | |
| only by USB OTG FS peripheral | |
| This parameter is added to ensure compatibility across USB peripherals */ | |
| uint32_t maxpacket; /*!< Endpoint Max packet size | |
| This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ | |
| uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ | |
| uint32_t xfer_len; /*!< Current transfer length */ | |
| uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ | |
| } USB_EPTypeDef; | |
| #endif /* USB */ | |
| /** | |
| * @} | |
| */ | |
| /* Exported constants --------------------------------------------------------*/ | |
| /** @defgroup USB_LL_Exported_Constants USB Low Layer Exported Constants | |
| * @{ | |
| */ | |
| #if defined (USB_OTG_FS) | |
| /** @defgroup USB_LL_Core_Mode USB Low Layer Core Mode | |
| * @{ | |
| */ | |
| #define USB_OTG_MODE_DEVICE 0 | |
| #define USB_OTG_MODE_HOST 1 | |
| #define USB_OTG_MODE_DRD 2 | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed | |
| * @{ | |
| */ | |
| #define USB_OTG_SPEED_LOW 2 | |
| #define USB_OTG_SPEED_FULL 3 | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY | |
| * @{ | |
| */ | |
| #define USB_OTG_ULPI_PHY 1 | |
| #define USB_OTG_EMBEDDED_PHY 2 | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS | |
| * @{ | |
| */ | |
| #define USB_OTG_FS_MAX_PACKET_SIZE 64 | |
| #define USB_OTG_MAX_EP0_SIZE 64 | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency | |
| * @{ | |
| */ | |
| #define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1) | |
| #define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1) | |
| #define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval | |
| * @{ | |
| */ | |
| #define DCFG_FRAME_INTERVAL_80 0 | |
| #define DCFG_FRAME_INTERVAL_85 1 | |
| #define DCFG_FRAME_INTERVAL_90 2 | |
| #define DCFG_FRAME_INTERVAL_95 3 | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS | |
| * @{ | |
| */ | |
| #define DEP0CTL_MPS_64 0 | |
| #define DEP0CTL_MPS_32 1 | |
| #define DEP0CTL_MPS_16 2 | |
| #define DEP0CTL_MPS_8 3 | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed | |
| * @{ | |
| */ | |
| #define EP_SPEED_LOW 0 | |
| #define EP_SPEED_FULL 1 | |
| #define EP_SPEED_HIGH 2 | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup USB_LL_EP_Type USB Low Layer EP Type | |
| * @{ | |
| */ | |
| #define EP_TYPE_CTRL 0 | |
| #define EP_TYPE_ISOC 1 | |
| #define EP_TYPE_BULK 2 | |
| #define EP_TYPE_INTR 3 | |
| #define EP_TYPE_MSK 3 | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines | |
| * @{ | |
| */ | |
| #define STS_GOUT_NAK 1 | |
| #define STS_DATA_UPDT 2 | |
| #define STS_XFER_COMP 3 | |
| #define STS_SETUP_COMP 4 | |
| #define STS_SETUP_UPDT 6 | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines | |
| * @{ | |
| */ | |
| #define HCFG_30_60_MHZ 0 | |
| #define HCFG_48_MHZ 1 | |
| #define HCFG_6_MHZ 2 | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines | |
| * @{ | |
| */ | |
| #define HPRT0_PRTSPD_HIGH_SPEED 0 | |
| #define HPRT0_PRTSPD_FULL_SPEED 1 | |
| #define HPRT0_PRTSPD_LOW_SPEED 2 | |
| /** | |
| * @} | |
| */ | |
| #define HCCHAR_CTRL 0 | |
| #define HCCHAR_ISOC 1 | |
| #define HCCHAR_BULK 2 | |
| #define HCCHAR_INTR 3 | |
| #define HC_PID_DATA0 0 | |
| #define HC_PID_DATA2 1 | |
| #define HC_PID_DATA1 2 | |
| #define HC_PID_SETUP 3 | |
| #define GRXSTS_PKTSTS_IN 2 | |
| #define GRXSTS_PKTSTS_IN_XFER_COMP 3 | |
| #define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5 | |
| #define GRXSTS_PKTSTS_CH_HALTED 7 | |
| #define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE) | |
| #define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE) | |
| #define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE)) | |
| #define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) | |
| #define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) | |
| #define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE) | |
| #define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE)) | |
| #define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE)) | |
| #endif /* USB_OTG_FS */ | |
| #if defined (USB) | |
| /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS | |
| * @{ | |
| */ | |
| #define DEP0CTL_MPS_64 0 | |
| #define DEP0CTL_MPS_32 1 | |
| #define DEP0CTL_MPS_16 2 | |
| #define DEP0CTL_MPS_8 3 | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup USB_LL_EP_Type USB Low Layer EP Type | |
| * @{ | |
| */ | |
| #define EP_TYPE_CTRL 0 | |
| #define EP_TYPE_ISOC 1 | |
| #define EP_TYPE_BULK 2 | |
| #define EP_TYPE_INTR 3 | |
| #define EP_TYPE_MSK 3 | |
| /** | |
| * @} | |
| */ | |
| #define BTABLE_ADDRESS (0x000) | |
| #endif /* USB */ | |
| /** | |
| * @} | |
| */ | |
| /* Exported macros -----------------------------------------------------------*/ | |
| /** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros | |
| * @{ | |
| */ | |
| #if defined (USB_OTG_FS) | |
| #define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) | |
| #define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) | |
| #define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) | |
| #define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) | |
| #endif /* USB_OTG_FS */ | |
| /** | |
| * @} | |
| */ | |
| /* Exported functions --------------------------------------------------------*/ | |
| /** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions | |
| * @{ | |
| */ | |
| /** @addtogroup USB_LL_Exported_Functions_Group1 Peripheral Control functions | |
| * @{ | |
| */ | |
| #if defined (USB_OTG_FS) | |
| HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); | |
| HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); | |
| HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); | |
| HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); | |
| HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_ModeTypeDef mode); | |
| HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed); | |
| HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx); | |
| HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num ); | |
| HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); | |
| HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); | |
| HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); | |
| HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); | |
| HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len); | |
| void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); | |
| HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); | |
| HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); | |
| HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address); | |
| HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx); | |
| HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx); | |
| HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); | |
| HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx); | |
| HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup); | |
| uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); | |
| uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); | |
| uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx); | |
| uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx); | |
| uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); | |
| uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx); | |
| uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); | |
| void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); | |
| HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); | |
| HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq); | |
| HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); | |
| HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state); | |
| uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx); | |
| uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx); | |
| HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, | |
| uint8_t ch_num, | |
| uint8_t epnum, | |
| uint8_t dev_address, | |
| uint8_t speed, | |
| uint8_t ep_type, | |
| uint16_t mps); | |
| HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc); | |
| uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx); | |
| HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num); | |
| HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num); | |
| HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); | |
| HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); | |
| HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); | |
| #endif /* USB_OTG_FS */ | |
| #if defined (USB) | |
| HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef Init); | |
| HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef Init); | |
| HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx); | |
| HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx); | |
| HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx , USB_ModeTypeDef mode); | |
| HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx , uint8_t speed); | |
| HAL_StatusTypeDef USB_FlushRxFifo (USB_TypeDef *USBx); | |
| HAL_StatusTypeDef USB_FlushTxFifo (USB_TypeDef *USBx, uint32_t num ); | |
| HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); | |
| HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); | |
| HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx , USB_EPTypeDef *ep); | |
| HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len); | |
| void * USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len); | |
| HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx , USB_EPTypeDef *ep); | |
| HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx , USB_EPTypeDef *ep); | |
| HAL_StatusTypeDef USB_SetDevAddress (USB_TypeDef *USBx, uint8_t address); | |
| HAL_StatusTypeDef USB_DevConnect (USB_TypeDef *USBx); | |
| HAL_StatusTypeDef USB_DevDisconnect (USB_TypeDef *USBx); | |
| HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx); | |
| HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup); | |
| uint32_t USB_ReadInterrupts (USB_TypeDef *USBx); | |
| uint32_t USB_ReadDevAllOutEpInterrupt (USB_TypeDef *USBx); | |
| uint32_t USB_ReadDevOutEPInterrupt (USB_TypeDef *USBx , uint8_t epnum); | |
| uint32_t USB_ReadDevAllInEpInterrupt (USB_TypeDef *USBx); | |
| uint32_t USB_ReadDevInEPInterrupt (USB_TypeDef *USBx , uint8_t epnum); | |
| void USB_ClearInterrupts (USB_TypeDef *USBx, uint32_t interrupt); | |
| HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx); | |
| HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx); | |
| void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes); | |
| void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes); | |
| #endif /* USB */ | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| #endif /* STM32F102x6 || STM32F102xB || */ | |
| /* STM32F103x6 || STM32F103xB || */ | |
| /* STM32F103xE || STM32F103xG || */ | |
| /* STM32F105xC || STM32F107xC */ | |
| #ifdef __cplusplus | |
| } | |
| #endif | |
| #endif /* __STM32F1xx_LL_USB_H */ | |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |