| /** | |
| ****************************************************************************** | |
| * @file stm32f1xx_hal_dac_ex.h | |
| * @author MCD Application Team | |
| * @version V1.1.1 | |
| * @date 12-May-2017 | |
| * @brief Header file of DAC HAL Extension module. | |
| ****************************************************************************** | |
| * @attention | |
| * | |
| * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
| * | |
| * Redistribution and use in source and binary forms, with or without modification, | |
| * are permitted provided that the following conditions are met: | |
| * 1. Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * 3. Neither the name of STMicroelectronics nor the names of its contributors | |
| * may be used to endorse or promote products derived from this software | |
| * without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| ****************************************************************************** | |
| */ | |
| /* Define to prevent recursive inclusion -------------------------------------*/ | |
| #ifndef __STM32F1xx_HAL_DAC_EX_H | |
| #define __STM32F1xx_HAL_DAC_EX_H | |
| #ifdef __cplusplus | |
| extern "C" { | |
| #endif | |
| #if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC) | |
| /* Includes ------------------------------------------------------------------*/ | |
| #include "stm32f1xx_hal_def.h" | |
| /** @addtogroup STM32F1xx_HAL_Driver | |
| * @{ | |
| */ | |
| /** @addtogroup DACEx | |
| * @{ | |
| */ | |
| /* Exported types ------------------------------------------------------------*/ | |
| /* Exported constants --------------------------------------------------------*/ | |
| /** @defgroup DACEx_Exported_Constants DACEx Exported Constants | |
| * @{ | |
| */ | |
| /** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangleamplitude | |
| * @{ | |
| */ | |
| #define DAC_LFSRUNMASK_BIT0 0x00000000U /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ | |
| #define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ | |
| #define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ | |
| #define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ | |
| #define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ | |
| #define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ | |
| #define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ | |
| #define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ | |
| #define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ | |
| #define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ | |
| #define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ | |
| #define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ | |
| #define DAC_TRIANGLEAMPLITUDE_1 0x00000000U /*!< Select max triangle amplitude of 1 */ | |
| #define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */ | |
| #define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */ | |
| #define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */ | |
| #define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */ | |
| #define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */ | |
| #define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */ | |
| #define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */ | |
| #define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */ | |
| #define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */ | |
| #define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */ | |
| #define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */ | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup DACEx_trigger_selection DAC trigger selection | |
| * @{ | |
| */ | |
| #define DAC_TRIGGER_NONE 0x00000000U /*!< Conversion is automatic once the DAC1_DHRxxxx register | |
| has been loaded, and not by external trigger */ | |
| #define DAC_TRIGGER_T6_TRGO ((uint32_t) DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */ | |
| #define DAC_TRIGGER_T7_TRGO ((uint32_t)( DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ | |
| #define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ | |
| #define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */ | |
| #define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ | |
| #define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */ | |
| #if defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || defined (STM32F103xG) | |
| /* For STM32F10x high-density and XL-density devices: TIM8 */ | |
| #define DAC_TRIGGER_T8_TRGO ((uint32_t) DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */ | |
| #endif /* STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ | |
| #if defined (STM32F100xB) || defined (STM32F100xE) || defined (STM32F105xC) || defined (STM32F107xC) | |
| /* For STM32F10x connectivity line devices and STM32F100x devices: TIM3 */ | |
| #define DAC_TRIGGER_T3_TRGO ((uint32_t) DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */ | |
| #endif /* STM32F100xB || STM32F100xE || STM32F105xC || STM32F107xC */ | |
| /* Availability of trigger from TIM5 and TIM15: */ | |
| /* - For STM32F10x value line devices STM32F100xB: */ | |
| /* trigger from TIM15 is available, TIM5 not available. */ | |
| /* - For STM32F10x value line devices STM32F100xE: */ | |
| /* trigger from TIM15 and TIM5 are both available, */ | |
| /* selection depends on remap (with TIM5 as default configuration). */ | |
| /* - Other STM32F1 devices: */ | |
| /* trigger from TIM5 is available, TIM15 not available. */ | |
| #if defined (STM32F100xB) | |
| #define DAC_TRIGGER_T15_TRGO ((uint32_t)( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel */ | |
| #else | |
| #define DAC_TRIGGER_T5_TRGO ((uint32_t)( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */ | |
| #if defined (STM32F100xE) | |
| /*!< DAC trigger availability depending on STM32F1 devices: | |
| For STM32F100x high-density value line devices, the TIM15 TRGO event can be selected | |
| as replacement of TIM5 TRGO if the MISC_REMAP bit in the AFIO_MAPR2 register is set. | |
| Refer to macro "__HAL_AFIO_REMAP_MISC_ENABLE()/__HAL_AFIO_REMAP_MISC_DISABLE()". | |
| Otherwise, TIM5 TRGO is used and TIM15 TRGO is not used (default case). | |
| For more details please refer to the AFIO section. */ | |
| #define DAC_TRIGGER_T15_TRGO DAC_TRIGGER_T5_TRGO | |
| #endif /* STM32F100xE */ | |
| #endif /* STM32F100xB */ | |
| /** | |
| * @} | |
| */ | |
| #if defined (STM32F100xB) || defined (STM32F100xE) | |
| /** @defgroup DAC_flags_definition DAC flags definition | |
| * @{ | |
| */ | |
| #define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1) | |
| #define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2) | |
| /** | |
| * @} | |
| */ | |
| /** @defgroup DAC_IT_definition DAC IT definition | |
| * @{ | |
| */ | |
| #define DAC_IT_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1) | |
| #define DAC_IT_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2) | |
| /** | |
| * @} | |
| */ | |
| #endif /* STM32F100xB || STM32F100xE */ | |
| /** | |
| * @} | |
| */ | |
| /* Exported macro ------------------------------------------------------------*/ | |
| #if defined (STM32F100xB) || defined (STM32F100xE) | |
| /** @defgroup DACEx_Exported_Macros DACEx Exported Macros | |
| * @{ | |
| */ | |
| /** @brief Enable the DAC interrupt | |
| * @param __HANDLE__: specifies the DAC handle | |
| * @param __INTERRUPT__: specifies the DAC interrupt. | |
| * This parameter can be any combination of the following values: | |
| * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt | |
| * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt | |
| * @retval None | |
| */ | |
| #define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__)) | |
| /** @brief Disable the DAC interrupt | |
| * @param __HANDLE__: specifies the DAC handle | |
| * @param __INTERRUPT__: specifies the DAC interrupt. | |
| * This parameter can be any combination of the following values: | |
| * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt | |
| * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt | |
| * @retval None | |
| */ | |
| #define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__)) | |
| /** @brief Checks if the specified DAC interrupt source is enabled or disabled. | |
| * @param __HANDLE__: DAC handle | |
| * @param __INTERRUPT__: DAC interrupt source to check | |
| * This parameter can be any combination of the following values: | |
| * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt | |
| * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt | |
| * @retval State of interruption (SET or RESET) | |
| */ | |
| #define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__)) | |
| /** @brief Get the selected DAC's flag status. | |
| * @param __HANDLE__: specifies the DAC handle. | |
| * @param __FLAG__: specifies the DAC flag to get. | |
| * This parameter can be any combination of the following values: | |
| * @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag | |
| * @arg DAC_FLAG_DMAUDR2: DAC channel 2 DMA underrun flag | |
| * @retval None | |
| */ | |
| #define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) | |
| /** @brief Clear the DAC's flag. | |
| * @param __HANDLE__: specifies the DAC handle. | |
| * @param __FLAG__: specifies the DAC flag to clear. | |
| * This parameter can be any combination of the following values: | |
| * @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag | |
| * @arg DAC_FLAG_DMAUDR2: DAC channel 2 DMA underrun flag | |
| * @retval None | |
| */ | |
| #define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__)) | |
| /** | |
| * @} | |
| */ | |
| #endif /* STM32F100xB || STM32F100xE */ | |
| /* Private macro -------------------------------------------------------------*/ | |
| /** @defgroup DACEx_Private_Macros DACEx Private Macros | |
| * @{ | |
| */ | |
| #if defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || defined (STM32F103xG) | |
| #define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \ | |
| ((TRIGGER) == DAC_TRIGGER_SOFTWARE)) | |
| #endif /* STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ | |
| #if defined (STM32F100xE) || defined (STM32F105xC) || defined (STM32F107xC) | |
| #define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \ | |
| ((TRIGGER) == DAC_TRIGGER_SOFTWARE)) | |
| #endif /* STM32F100xE || STM32F105xC || STM32F107xC */ | |
| #if defined (STM32F100xB) | |
| #define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \ | |
| ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \ | |
| ((TRIGGER) == DAC_TRIGGER_SOFTWARE)) | |
| #endif /* STM32F100xB */ | |
| #define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \ | |
| ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \ | |
| ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \ | |
| ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \ | |
| ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \ | |
| ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \ | |
| ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \ | |
| ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \ | |
| ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \ | |
| ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \ | |
| ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \ | |
| ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \ | |
| ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \ | |
| ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \ | |
| ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \ | |
| ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \ | |
| ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \ | |
| ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \ | |
| ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \ | |
| ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \ | |
| ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \ | |
| ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \ | |
| ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \ | |
| ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095)) | |
| /** | |
| * @} | |
| */ | |
| /* Exported functions --------------------------------------------------------*/ | |
| /** @addtogroup DACEx_Exported_Functions | |
| * @{ | |
| */ | |
| /** @addtogroup DACEx_Exported_Functions_Group1 | |
| * @{ | |
| */ | |
| /* Extension features functions ***********************************************/ | |
| uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac); | |
| HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude); | |
| HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude); | |
| HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2); | |
| void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac); | |
| void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac); | |
| void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac); | |
| #if defined (STM32F100xB) || defined (STM32F100xE) | |
| void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac); | |
| void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac); | |
| void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac); | |
| #endif /* STM32F100xB) || defined (STM32F100xE) */ | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /** @addtogroup DACEx_Private_Functions | |
| * @{ | |
| */ | |
| void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma); | |
| void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma); | |
| void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma); | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| #endif /* STM32F100xB || STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ | |
| #ifdef __cplusplus | |
| } | |
| #endif | |
| #endif /*__STM32F1xx_HAL_DAC_EX_H */ | |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |