| #ifndef NRFX_CONFIG_H__ |
| #define NRFX_CONFIG_H__ |
| |
| // <<< Use Configuration Wizard in Context Menu >>>\n |
| |
| // <h> nRF_Drivers |
| |
| // <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver |
| //========================================================== |
| #ifndef NRFX_CLOCK_ENABLED |
| #define NRFX_CLOCK_ENABLED 1 |
| #endif |
| // <o> NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source |
| |
| // <0=> RC |
| // <1=> XTAL |
| // <2=> Synth |
| |
| #ifndef NRFX_CLOCK_CONFIG_LF_SRC |
| #define NRFX_CLOCK_CONFIG_LF_SRC 1 |
| #endif |
| |
| // <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY |
| #define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED |
| #define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL |
| #define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_CLOCK_CONFIG_INFO_COLOR |
| #define NRFX_CLOCK_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR |
| #define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_COMP_ENABLED - nrfx_comp - COMP peripheral driver |
| //========================================================== |
| #ifndef NRFX_COMP_ENABLED |
| #define NRFX_COMP_ENABLED 1 |
| #endif |
| // <o> NRFX_COMP_CONFIG_REF - Reference voltage |
| |
| // <0=> Internal 1.2V |
| // <1=> Internal 1.8V |
| // <2=> Internal 2.4V |
| // <4=> VDD |
| // <7=> ARef |
| |
| #ifndef NRFX_COMP_CONFIG_REF |
| #define NRFX_COMP_CONFIG_REF 1 |
| #endif |
| |
| // <o> NRFX_COMP_CONFIG_MAIN_MODE - Main mode |
| |
| // <0=> Single ended |
| // <1=> Differential |
| |
| #ifndef NRFX_COMP_CONFIG_MAIN_MODE |
| #define NRFX_COMP_CONFIG_MAIN_MODE 0 |
| #endif |
| |
| // <o> NRFX_COMP_CONFIG_SPEED_MODE - Speed mode |
| |
| // <0=> Low power |
| // <1=> Normal |
| // <2=> High speed |
| |
| #ifndef NRFX_COMP_CONFIG_SPEED_MODE |
| #define NRFX_COMP_CONFIG_SPEED_MODE 2 |
| #endif |
| |
| // <o> NRFX_COMP_CONFIG_HYST - Hystheresis |
| |
| // <0=> No |
| // <1=> 50mV |
| |
| #ifndef NRFX_COMP_CONFIG_HYST |
| #define NRFX_COMP_CONFIG_HYST 0 |
| #endif |
| |
| // <o> NRFX_COMP_CONFIG_ISOURCE - Current Source |
| |
| // <0=> Off |
| // <1=> 2.5 uA |
| // <2=> 5 uA |
| // <3=> 10 uA |
| |
| #ifndef NRFX_COMP_CONFIG_ISOURCE |
| #define NRFX_COMP_CONFIG_ISOURCE 0 |
| #endif |
| |
| // <o> NRFX_COMP_CONFIG_INPUT - Analog input |
| |
| // <0=> 0 |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_COMP_CONFIG_INPUT |
| #define NRFX_COMP_CONFIG_INPUT 0 |
| #endif |
| |
| // <o> NRFX_COMP_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_COMP_CONFIG_IRQ_PRIORITY |
| #define NRFX_COMP_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_COMP_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_COMP_CONFIG_LOG_ENABLED |
| #define NRFX_COMP_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_COMP_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_COMP_CONFIG_LOG_LEVEL |
| #define NRFX_COMP_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_COMP_CONFIG_INFO_COLOR |
| #define NRFX_COMP_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_COMP_CONFIG_DEBUG_COLOR |
| #define NRFX_COMP_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver |
| //========================================================== |
| #ifndef NRFX_GPIOTE_ENABLED |
| #define NRFX_GPIOTE_ENABLED 1 |
| #endif |
| // <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins |
| #ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS |
| #define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1 |
| #endif |
| |
| // <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY |
| #define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED |
| #define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL |
| #define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR |
| #define NRFX_GPIOTE_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR |
| #define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_PDM_ENABLED - nrfx_pdm - PDM peripheral driver |
| //========================================================== |
| #ifndef NRFX_PDM_ENABLED |
| #define NRFX_PDM_ENABLED 1 |
| #endif |
| // <o> NRFX_PDM_CONFIG_MODE - Mode |
| |
| // <0=> Stereo |
| // <1=> Mono |
| |
| #ifndef NRFX_PDM_CONFIG_MODE |
| #define NRFX_PDM_CONFIG_MODE 1 |
| #endif |
| |
| // <o> NRFX_PDM_CONFIG_EDGE - Edge |
| |
| // <0=> Left falling |
| // <1=> Left rising |
| |
| #ifndef NRFX_PDM_CONFIG_EDGE |
| #define NRFX_PDM_CONFIG_EDGE 0 |
| #endif |
| |
| // <o> NRFX_PDM_CONFIG_CLOCK_FREQ - Clock frequency |
| |
| // <134217728=> 1000k |
| // <138412032=> 1032k (default) |
| // <142606336=> 1067k |
| |
| #ifndef NRFX_PDM_CONFIG_CLOCK_FREQ |
| #define NRFX_PDM_CONFIG_CLOCK_FREQ 138412032 |
| #endif |
| |
| // <o> NRFX_PDM_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_PDM_CONFIG_IRQ_PRIORITY |
| #define NRFX_PDM_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_PDM_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_PDM_CONFIG_LOG_ENABLED |
| #define NRFX_PDM_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_PDM_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_PDM_CONFIG_LOG_LEVEL |
| #define NRFX_PDM_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PDM_CONFIG_INFO_COLOR |
| #define NRFX_PDM_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PDM_CONFIG_DEBUG_COLOR |
| #define NRFX_PDM_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver |
| //========================================================== |
| #ifndef NRFX_POWER_ENABLED |
| #define NRFX_POWER_ENABLED 1 |
| #endif |
| // <o> NRFX_POWER_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY |
| #define NRFX_POWER_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator |
| |
| |
| // <i> This settings means only that components for DCDC regulator are installed and it can be enabled. |
| |
| #ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN |
| #define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0 |
| #endif |
| |
| // <q> NRFX_POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator |
| |
| |
| // <i> This settings means only that components for DCDC regulator are installed and it can be enabled. |
| |
| #ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV |
| #define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0 |
| #endif |
| |
| // </e> |
| |
| // <e> NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator |
| //========================================================== |
| #ifndef NRFX_PPI_ENABLED |
| #define NRFX_PPI_ENABLED 1 |
| #endif |
| // <e> NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_PPI_CONFIG_LOG_ENABLED |
| #define NRFX_PPI_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_PPI_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_PPI_CONFIG_LOG_LEVEL |
| #define NRFX_PPI_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PPI_CONFIG_INFO_COLOR |
| #define NRFX_PPI_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PPI_CONFIG_DEBUG_COLOR |
| #define NRFX_PPI_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module |
| //========================================================== |
| #ifndef NRFX_PRS_ENABLED |
| #define NRFX_PRS_ENABLED 1 |
| #endif |
| // <q> NRFX_PRS_BOX_0_ENABLED - Enables box 0 in the module. |
| |
| |
| #ifndef NRFX_PRS_BOX_0_ENABLED |
| #define NRFX_PRS_BOX_0_ENABLED 1 |
| #endif |
| |
| // <q> NRFX_PRS_BOX_1_ENABLED - Enables box 1 in the module. |
| |
| |
| #ifndef NRFX_PRS_BOX_1_ENABLED |
| #define NRFX_PRS_BOX_1_ENABLED 1 |
| #endif |
| |
| // <q> NRFX_PRS_BOX_2_ENABLED - Enables box 2 in the module. |
| |
| |
| #ifndef NRFX_PRS_BOX_2_ENABLED |
| #define NRFX_PRS_BOX_2_ENABLED 1 |
| #endif |
| |
| // <q> NRFX_PRS_BOX_3_ENABLED - Enables box 3 in the module. |
| |
| |
| #ifndef NRFX_PRS_BOX_3_ENABLED |
| #define NRFX_PRS_BOX_3_ENABLED 1 |
| #endif |
| |
| // <q> NRFX_PRS_BOX_4_ENABLED - Enables box 4 in the module. |
| |
| |
| #ifndef NRFX_PRS_BOX_4_ENABLED |
| #define NRFX_PRS_BOX_4_ENABLED 1 |
| #endif |
| |
| // <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_PRS_CONFIG_LOG_ENABLED |
| #define NRFX_PRS_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_PRS_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_PRS_CONFIG_LOG_LEVEL |
| #define NRFX_PRS_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_PRS_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PRS_CONFIG_INFO_COLOR |
| #define NRFX_PRS_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_PRS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PRS_CONFIG_DEBUG_COLOR |
| #define NRFX_PRS_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver |
| //========================================================== |
| #ifndef NRFX_PWM_ENABLED |
| #define NRFX_PWM_ENABLED 1 |
| #endif |
| // <q> NRFX_PWM0_ENABLED - Enable PWM0 instance |
| |
| |
| #ifndef NRFX_PWM0_ENABLED |
| #define NRFX_PWM0_ENABLED 1 |
| #endif |
| |
| // <o> NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin <0-31> |
| |
| |
| #ifndef NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN |
| #define NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN 31 |
| #endif |
| |
| // <o> NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin <0-31> |
| |
| |
| #ifndef NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN |
| #define NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN 31 |
| #endif |
| |
| // <o> NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin <0-31> |
| |
| |
| #ifndef NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN |
| #define NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN 31 |
| #endif |
| |
| // <o> NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin <0-31> |
| |
| |
| #ifndef NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN |
| #define NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN 31 |
| #endif |
| |
| // <o> NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK - Base clock |
| |
| // <0=> 16 MHz |
| // <1=> 8 MHz |
| // <2=> 4 MHz |
| // <3=> 2 MHz |
| // <4=> 1 MHz |
| // <5=> 500 kHz |
| // <6=> 250 kHz |
| // <7=> 125 kHz |
| |
| #ifndef NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK |
| #define NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK 4 |
| #endif |
| |
| // <o> NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE - Count mode |
| |
| // <0=> Up |
| // <1=> Up and Down |
| |
| #ifndef NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE |
| #define NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE 0 |
| #endif |
| |
| // <o> NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE - Top value |
| #ifndef NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE |
| #define NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE 1000 |
| #endif |
| |
| // <o> NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE - Load mode |
| |
| // <0=> Common |
| // <1=> Grouped |
| // <2=> Individual |
| // <3=> Waveform |
| |
| #ifndef NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE |
| #define NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE 0 |
| #endif |
| |
| // <o> NRFX_PWM_DEFAULT_CONFIG_STEP_MODE - Step mode |
| |
| // <0=> Auto |
| // <1=> Triggered |
| |
| #ifndef NRFX_PWM_DEFAULT_CONFIG_STEP_MODE |
| #define NRFX_PWM_DEFAULT_CONFIG_STEP_MODE 0 |
| #endif |
| |
| // <o> NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_PWM_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_PWM_CONFIG_LOG_ENABLED |
| #define NRFX_PWM_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_PWM_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_PWM_CONFIG_LOG_LEVEL |
| #define NRFX_PWM_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PWM_CONFIG_INFO_COLOR |
| #define NRFX_PWM_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_PWM_CONFIG_DEBUG_COLOR |
| #define NRFX_PWM_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver |
| //========================================================== |
| #ifndef NRFX_QDEC_ENABLED |
| #define NRFX_QDEC_ENABLED 1 |
| #endif |
| // <o> NRFX_QDEC_CONFIG_REPORTPER - Report period |
| |
| // <0=> 10 Samples |
| // <1=> 40 Samples |
| // <2=> 80 Samples |
| // <3=> 120 Samples |
| // <4=> 160 Samples |
| // <5=> 200 Samples |
| // <6=> 240 Samples |
| // <7=> 280 Samples |
| |
| #ifndef NRFX_QDEC_CONFIG_REPORTPER |
| #define NRFX_QDEC_CONFIG_REPORTPER 0 |
| #endif |
| |
| // <o> NRFX_QDEC_CONFIG_SAMPLEPER - Sample period |
| |
| // <0=> 128 us |
| // <1=> 256 us |
| // <2=> 512 us |
| // <3=> 1024 us |
| // <4=> 2048 us |
| // <5=> 4096 us |
| // <6=> 8192 us |
| // <7=> 16384 us |
| |
| #ifndef NRFX_QDEC_CONFIG_SAMPLEPER |
| #define NRFX_QDEC_CONFIG_SAMPLEPER 7 |
| #endif |
| |
| // <o> NRFX_QDEC_CONFIG_PIO_A - A pin <0-31> |
| |
| |
| #ifndef NRFX_QDEC_CONFIG_PIO_A |
| #define NRFX_QDEC_CONFIG_PIO_A 31 |
| #endif |
| |
| // <o> NRFX_QDEC_CONFIG_PIO_B - B pin <0-31> |
| |
| |
| #ifndef NRFX_QDEC_CONFIG_PIO_B |
| #define NRFX_QDEC_CONFIG_PIO_B 31 |
| #endif |
| |
| // <o> NRFX_QDEC_CONFIG_PIO_LED - LED pin <0-31> |
| |
| |
| #ifndef NRFX_QDEC_CONFIG_PIO_LED |
| #define NRFX_QDEC_CONFIG_PIO_LED 31 |
| #endif |
| |
| // <o> NRFX_QDEC_CONFIG_LEDPRE - LED pre |
| #ifndef NRFX_QDEC_CONFIG_LEDPRE |
| #define NRFX_QDEC_CONFIG_LEDPRE 511 |
| #endif |
| |
| // <o> NRFX_QDEC_CONFIG_LEDPOL - LED polarity |
| |
| // <0=> Active low |
| // <1=> Active high |
| |
| #ifndef NRFX_QDEC_CONFIG_LEDPOL |
| #define NRFX_QDEC_CONFIG_LEDPOL 1 |
| #endif |
| |
| // <q> NRFX_QDEC_CONFIG_DBFEN - Debouncing enable |
| |
| |
| #ifndef NRFX_QDEC_CONFIG_DBFEN |
| #define NRFX_QDEC_CONFIG_DBFEN 0 |
| #endif |
| |
| // <q> NRFX_QDEC_CONFIG_SAMPLE_INTEN - Sample ready interrupt enable |
| |
| |
| #ifndef NRFX_QDEC_CONFIG_SAMPLE_INTEN |
| #define NRFX_QDEC_CONFIG_SAMPLE_INTEN 0 |
| #endif |
| |
| // <o> NRFX_QDEC_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_QDEC_CONFIG_IRQ_PRIORITY |
| #define NRFX_QDEC_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_QDEC_CONFIG_LOG_ENABLED |
| #define NRFX_QDEC_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_QDEC_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_QDEC_CONFIG_LOG_LEVEL |
| #define NRFX_QDEC_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_QDEC_CONFIG_INFO_COLOR |
| #define NRFX_QDEC_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_QDEC_CONFIG_DEBUG_COLOR |
| #define NRFX_QDEC_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver |
| //========================================================== |
| #ifndef NRFX_RNG_ENABLED |
| #define NRFX_RNG_ENABLED 1 |
| #endif |
| // <q> NRFX_RNG_CONFIG_ERROR_CORRECTION - Error correction |
| |
| |
| #ifndef NRFX_RNG_CONFIG_ERROR_CORRECTION |
| #define NRFX_RNG_CONFIG_ERROR_CORRECTION 1 |
| #endif |
| |
| // <o> NRFX_RNG_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_RNG_CONFIG_IRQ_PRIORITY |
| #define NRFX_RNG_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_RNG_CONFIG_LOG_ENABLED |
| #define NRFX_RNG_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_RNG_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_RNG_CONFIG_LOG_LEVEL |
| #define NRFX_RNG_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_RNG_CONFIG_INFO_COLOR |
| #define NRFX_RNG_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_RNG_CONFIG_DEBUG_COLOR |
| #define NRFX_RNG_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver |
| //========================================================== |
| #ifndef NRFX_RTC_ENABLED |
| #define NRFX_RTC_ENABLED 1 |
| #endif |
| // <q> NRFX_RTC0_ENABLED - Enable RTC0 instance |
| |
| |
| #ifndef NRFX_RTC0_ENABLED |
| #define NRFX_RTC0_ENABLED 1 |
| #endif |
| |
| // <q> NRFX_RTC1_ENABLED - Enable RTC1 instance |
| |
| |
| #ifndef NRFX_RTC1_ENABLED |
| #define NRFX_RTC1_ENABLED 1 |
| #endif |
| |
| // <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt |
| #ifndef NRFX_RTC_MAXIMUM_LATENCY_US |
| #define NRFX_RTC_MAXIMUM_LATENCY_US 2000 |
| #endif |
| |
| // <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency <16-32768> |
| |
| |
| #ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY |
| #define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768 |
| #endif |
| |
| // <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE - Ensures safe compare event triggering |
| |
| |
| #ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE |
| #define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0 |
| #endif |
| |
| // <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_RTC_CONFIG_LOG_ENABLED |
| #define NRFX_RTC_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_RTC_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_RTC_CONFIG_LOG_LEVEL |
| #define NRFX_RTC_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_RTC_CONFIG_INFO_COLOR |
| #define NRFX_RTC_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_RTC_CONFIG_DEBUG_COLOR |
| #define NRFX_RTC_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver |
| //========================================================== |
| #ifndef NRFX_SAADC_ENABLED |
| #define NRFX_SAADC_ENABLED 1 |
| #endif |
| // <o> NRFX_SAADC_CONFIG_RESOLUTION - Resolution |
| |
| // <0=> 8 bit |
| // <1=> 10 bit |
| // <2=> 12 bit |
| // <3=> 14 bit |
| |
| #ifndef NRFX_SAADC_CONFIG_RESOLUTION |
| #define NRFX_SAADC_CONFIG_RESOLUTION 1 |
| #endif |
| |
| // <o> NRFX_SAADC_CONFIG_OVERSAMPLE - Sample period |
| |
| // <0=> Disabled |
| // <1=> 2x |
| // <2=> 4x |
| // <3=> 8x |
| // <4=> 16x |
| // <5=> 32x |
| // <6=> 64x |
| // <7=> 128x |
| // <8=> 256x |
| |
| #ifndef NRFX_SAADC_CONFIG_OVERSAMPLE |
| #define NRFX_SAADC_CONFIG_OVERSAMPLE 0 |
| #endif |
| |
| // <q> NRFX_SAADC_CONFIG_LP_MODE - Enabling low power mode |
| |
| |
| #ifndef NRFX_SAADC_CONFIG_LP_MODE |
| #define NRFX_SAADC_CONFIG_LP_MODE 0 |
| #endif |
| |
| // <o> NRFX_SAADC_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_SAADC_CONFIG_IRQ_PRIORITY |
| #define NRFX_SAADC_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_SAADC_CONFIG_LOG_ENABLED |
| #define NRFX_SAADC_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_SAADC_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_SAADC_CONFIG_LOG_LEVEL |
| #define NRFX_SAADC_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SAADC_CONFIG_INFO_COLOR |
| #define NRFX_SAADC_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SAADC_CONFIG_DEBUG_COLOR |
| #define NRFX_SAADC_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver |
| //========================================================== |
| #ifndef NRFX_SPIM_ENABLED |
| #define NRFX_SPIM_ENABLED 1 |
| #endif |
| // <q> NRFX_SPIM0_ENABLED - Enable SPIM0 instance |
| |
| |
| #ifndef NRFX_SPIM0_ENABLED |
| #define NRFX_SPIM0_ENABLED 1 |
| #endif |
| |
| // <o> NRFX_SPIM_MISO_PULL_CFG - MISO pin pull configuration. |
| |
| // <0=> NRF_GPIO_PIN_NOPULL |
| // <1=> NRF_GPIO_PIN_PULLDOWN |
| // <3=> NRF_GPIO_PIN_PULLUP |
| |
| #ifndef NRFX_SPIM_MISO_PULL_CFG |
| #define NRFX_SPIM_MISO_PULL_CFG 1 |
| #endif |
| |
| // <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_SPIM_CONFIG_LOG_ENABLED |
| #define NRFX_SPIM_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_SPIM_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_SPIM_CONFIG_LOG_LEVEL |
| #define NRFX_SPIM_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_SPIM_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPIM_CONFIG_INFO_COLOR |
| #define NRFX_SPIM_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_SPIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR |
| #define NRFX_SPIM_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver |
| //========================================================== |
| #ifndef NRFX_SPIS_ENABLED |
| #define NRFX_SPIS_ENABLED 1 |
| #endif |
| // <q> NRFX_SPIS0_ENABLED - Enable SPIS0 instance |
| |
| |
| #ifndef NRFX_SPIS0_ENABLED |
| #define NRFX_SPIS0_ENABLED 1 |
| #endif |
| |
| // <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <o> NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character <0-255> |
| |
| |
| #ifndef NRFX_SPIS_DEFAULT_DEF |
| #define NRFX_SPIS_DEFAULT_DEF 255 |
| #endif |
| |
| // <o> NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character <0-255> |
| |
| |
| #ifndef NRFX_SPIS_DEFAULT_ORC |
| #define NRFX_SPIS_DEFAULT_ORC 255 |
| #endif |
| |
| // <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_SPIS_CONFIG_LOG_ENABLED |
| #define NRFX_SPIS_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_SPIS_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_SPIS_CONFIG_LOG_LEVEL |
| #define NRFX_SPIS_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPIS_CONFIG_INFO_COLOR |
| #define NRFX_SPIS_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR |
| #define NRFX_SPIS_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator |
| //========================================================== |
| #ifndef NRFX_SWI_ENABLED |
| #define NRFX_SWI_ENABLED 1 |
| #endif |
| // <q> NRFX_EGU_ENABLED - Enable EGU support |
| |
| |
| #ifndef NRFX_EGU_ENABLED |
| #define NRFX_EGU_ENABLED 0 |
| #endif |
| |
| // <q> NRFX_SWI0_DISABLED - Exclude SWI0 from being utilized by the driver |
| |
| |
| #ifndef NRFX_SWI0_DISABLED |
| #define NRFX_SWI0_DISABLED 0 |
| #endif |
| |
| // <q> NRFX_SWI1_DISABLED - Exclude SWI1 from being utilized by the driver |
| |
| |
| #ifndef NRFX_SWI1_DISABLED |
| #define NRFX_SWI1_DISABLED 0 |
| #endif |
| |
| // <q> NRFX_SWI2_DISABLED - Exclude SWI2 from being utilized by the driver |
| |
| |
| #ifndef NRFX_SWI2_DISABLED |
| #define NRFX_SWI2_DISABLED 0 |
| #endif |
| |
| // <q> NRFX_SWI3_DISABLED - Exclude SWI3 from being utilized by the driver |
| |
| |
| #ifndef NRFX_SWI3_DISABLED |
| #define NRFX_SWI3_DISABLED 0 |
| #endif |
| |
| // <q> NRFX_SWI4_DISABLED - Exclude SWI4 from being utilized by the driver |
| |
| |
| #ifndef NRFX_SWI4_DISABLED |
| #define NRFX_SWI4_DISABLED 0 |
| #endif |
| |
| // <q> NRFX_SWI5_DISABLED - Exclude SWI5 from being utilized by the driver |
| |
| |
| #ifndef NRFX_SWI5_DISABLED |
| #define NRFX_SWI5_DISABLED 0 |
| #endif |
| |
| // <e> NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_SWI_CONFIG_LOG_ENABLED |
| #define NRFX_SWI_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_SWI_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_SWI_CONFIG_LOG_LEVEL |
| #define NRFX_SWI_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_SWI_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SWI_CONFIG_INFO_COLOR |
| #define NRFX_SWI_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_SWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_SWI_CONFIG_DEBUG_COLOR |
| #define NRFX_SWI_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <q> NRFX_SYSTICK_ENABLED - nrfx_systick - ARM(R) SysTick driver |
| |
| |
| #ifndef NRFX_SYSTICK_ENABLED |
| #define NRFX_SYSTICK_ENABLED 1 |
| #endif |
| |
| // <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver |
| //========================================================== |
| #ifndef NRFX_TIMER_ENABLED |
| #define NRFX_TIMER_ENABLED 1 |
| #endif |
| // <q> NRFX_TIMER0_ENABLED - Enable TIMER0 instance |
| |
| |
| #ifndef NRFX_TIMER0_ENABLED |
| #define NRFX_TIMER0_ENABLED 1 |
| #endif |
| |
| // <q> NRFX_TIMER1_ENABLED - Enable TIMER1 instance |
| |
| |
| #ifndef NRFX_TIMER1_ENABLED |
| #define NRFX_TIMER1_ENABLED 1 |
| #endif |
| |
| // <q> NRFX_TIMER2_ENABLED - Enable TIMER2 instance |
| |
| |
| #ifndef NRFX_TIMER2_ENABLED |
| #define NRFX_TIMER2_ENABLED 1 |
| #endif |
| |
| // <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY - Timer frequency if in Timer mode |
| |
| // <0=> 16 MHz |
| // <1=> 8 MHz |
| // <2=> 4 MHz |
| // <3=> 2 MHz |
| // <4=> 1 MHz |
| // <5=> 500 kHz |
| // <6=> 250 kHz |
| // <7=> 125 kHz |
| // <8=> 62.5 kHz |
| // <9=> 31.25 kHz |
| |
| #ifndef NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY |
| #define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY 0 |
| #endif |
| |
| // <o> NRFX_TIMER_DEFAULT_CONFIG_MODE - Timer mode or operation |
| |
| // <0=> Timer |
| // <1=> Counter |
| |
| #ifndef NRFX_TIMER_DEFAULT_CONFIG_MODE |
| #define NRFX_TIMER_DEFAULT_CONFIG_MODE 0 |
| #endif |
| |
| // <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH - Timer counter bit width |
| |
| // <0=> 16 bit |
| // <1=> 8 bit |
| // <2=> 24 bit |
| // <3=> 32 bit |
| |
| #ifndef NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH |
| #define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH 0 |
| #endif |
| |
| // <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_TIMER_CONFIG_LOG_ENABLED |
| #define NRFX_TIMER_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_TIMER_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_TIMER_CONFIG_LOG_LEVEL |
| #define NRFX_TIMER_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TIMER_CONFIG_INFO_COLOR |
| #define NRFX_TIMER_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR |
| #define NRFX_TIMER_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver |
| //========================================================== |
| #ifndef NRFX_TWIM_ENABLED |
| #define NRFX_TWIM_ENABLED 1 |
| #endif |
| // <q> NRFX_TWIM0_ENABLED - Enable TWIM0 instance |
| |
| |
| #ifndef NRFX_TWIM0_ENABLED |
| #define NRFX_TWIM0_ENABLED 1 |
| #endif |
| |
| // <o> NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY - Frequency |
| |
| // <26738688=> 100k |
| // <67108864=> 250k |
| // <104857600=> 400k |
| |
| #ifndef NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY |
| #define NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY 26738688 |
| #endif |
| |
| // <q> NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT - Enables bus holding after uninit |
| |
| |
| #ifndef NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT |
| #define NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0 |
| #endif |
| |
| // <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_TWIM_CONFIG_LOG_ENABLED |
| #define NRFX_TWIM_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_TWIM_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_TWIM_CONFIG_LOG_LEVEL |
| #define NRFX_TWIM_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_TWIM_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWIM_CONFIG_INFO_COLOR |
| #define NRFX_TWIM_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_TWIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR |
| #define NRFX_TWIM_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver |
| //========================================================== |
| #ifndef NRFX_TWIS_ENABLED |
| #define NRFX_TWIS_ENABLED 1 |
| #endif |
| // <q> NRFX_TWIS0_ENABLED - Enable TWIS0 instance |
| |
| |
| #ifndef NRFX_TWIS0_ENABLED |
| #define NRFX_TWIS0_ENABLED 1 |
| #endif |
| |
| // <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY - Assume that any instance would be initialized only once |
| |
| |
| // <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code. |
| |
| #ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY |
| #define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0 |
| #endif |
| |
| // <q> NRFX_TWIS_NO_SYNC_MODE - Remove support for synchronous mode |
| |
| |
| // <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources. |
| |
| #ifndef NRFX_TWIS_NO_SYNC_MODE |
| #define NRFX_TWIS_NO_SYNC_MODE 0 |
| #endif |
| |
| // <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR0 - Address0 |
| #ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR0 |
| #define NRFX_TWIS_DEFAULT_CONFIG_ADDR0 0 |
| #endif |
| |
| // <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR1 - Address1 |
| #ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR1 |
| #define NRFX_TWIS_DEFAULT_CONFIG_ADDR1 0 |
| #endif |
| |
| // <o> NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL - SCL pin pull configuration |
| |
| // <0=> Disabled |
| // <1=> Pull down |
| // <3=> Pull up |
| |
| #ifndef NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL |
| #define NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL 0 |
| #endif |
| |
| // <o> NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL - SDA pin pull configuration |
| |
| // <0=> Disabled |
| // <1=> Pull down |
| // <3=> Pull up |
| |
| #ifndef NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL |
| #define NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL 0 |
| #endif |
| |
| // <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_TWIS_CONFIG_LOG_ENABLED |
| #define NRFX_TWIS_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_TWIS_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_TWIS_CONFIG_LOG_LEVEL |
| #define NRFX_TWIS_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWIS_CONFIG_INFO_COLOR |
| #define NRFX_TWIS_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR |
| #define NRFX_TWIS_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver |
| //========================================================== |
| #ifndef NRFX_UARTE_ENABLED |
| #define NRFX_UARTE_ENABLED 1 |
| #endif |
| // <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance |
| #ifndef NRFX_UARTE0_ENABLED |
| #define NRFX_UARTE0_ENABLED 1 |
| #endif |
| |
| // <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC - Hardware Flow Control |
| |
| // <0=> Disabled |
| // <1=> Enabled |
| |
| #ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC |
| #define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0 |
| #endif |
| |
| // <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY - Parity |
| |
| // <0=> Excluded |
| // <14=> Included |
| |
| #ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY |
| #define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0 |
| #endif |
| |
| // <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE - Default Baudrate |
| |
| // <323584=> 1200 baud |
| // <643072=> 2400 baud |
| // <1290240=> 4800 baud |
| // <2576384=> 9600 baud |
| // <3862528=> 14400 baud |
| // <5152768=> 19200 baud |
| // <7716864=> 28800 baud |
| // <8388608=> 31250 baud |
| // <10289152=> 38400 baud |
| // <15007744=> 56000 baud |
| // <15400960=> 57600 baud |
| // <20615168=> 76800 baud |
| // <30801920=> 115200 baud |
| // <61865984=> 230400 baud |
| // <67108864=> 250000 baud |
| // <121634816=> 460800 baud |
| // <251658240=> 921600 baud |
| // <268435456=> 1000000 baud |
| |
| #ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE |
| #define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920 |
| #endif |
| |
| // <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY |
| #define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_UARTE_CONFIG_LOG_ENABLED |
| #define NRFX_UARTE_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_UARTE_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_UARTE_CONFIG_LOG_LEVEL |
| #define NRFX_UARTE_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_UARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_UARTE_CONFIG_INFO_COLOR |
| #define NRFX_UARTE_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_UARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR |
| #define NRFX_UARTE_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver |
| //========================================================== |
| #ifndef NRFX_WDT_ENABLED |
| #define NRFX_WDT_ENABLED 1 |
| #endif |
| // <o> NRFX_WDT_CONFIG_BEHAVIOUR - WDT behavior in CPU SLEEP or HALT mode |
| |
| // <1=> Run in SLEEP, Pause in HALT |
| // <8=> Pause in SLEEP, Run in HALT |
| // <9=> Run in SLEEP and HALT |
| // <0=> Pause in SLEEP and HALT |
| |
| #ifndef NRFX_WDT_CONFIG_BEHAVIOUR |
| #define NRFX_WDT_CONFIG_BEHAVIOUR 1 |
| #endif |
| |
| // <o> NRFX_WDT_CONFIG_RELOAD_VALUE - Reload value <15-4294967295> |
| |
| |
| #ifndef NRFX_WDT_CONFIG_RELOAD_VALUE |
| #define NRFX_WDT_CONFIG_RELOAD_VALUE 2000 |
| #endif |
| |
| // <o> NRFX_WDT_CONFIG_IRQ_PRIORITY - Interrupt priority |
| |
| // <0=> 0 (highest) |
| // <1=> 1 |
| // <2=> 2 |
| // <3=> 3 |
| // <4=> 4 |
| // <5=> 5 |
| // <6=> 6 |
| // <7=> 7 |
| |
| #ifndef NRFX_WDT_CONFIG_IRQ_PRIORITY |
| #define NRFX_WDT_CONFIG_IRQ_PRIORITY 7 |
| #endif |
| |
| // <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module. |
| //========================================================== |
| #ifndef NRFX_WDT_CONFIG_LOG_ENABLED |
| #define NRFX_WDT_CONFIG_LOG_ENABLED 0 |
| #endif |
| // <o> NRFX_WDT_CONFIG_LOG_LEVEL - Default Severity level |
| |
| // <0=> Off |
| // <1=> Error |
| // <2=> Warning |
| // <3=> Info |
| // <4=> Debug |
| |
| #ifndef NRFX_WDT_CONFIG_LOG_LEVEL |
| #define NRFX_WDT_CONFIG_LOG_LEVEL 3 |
| #endif |
| |
| // <o> NRFX_WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_WDT_CONFIG_INFO_COLOR |
| #define NRFX_WDT_CONFIG_INFO_COLOR 0 |
| #endif |
| |
| // <o> NRFX_WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. |
| |
| // <0=> Default |
| // <1=> Black |
| // <2=> Red |
| // <3=> Green |
| // <4=> Yellow |
| // <5=> Blue |
| // <6=> Magenta |
| // <7=> Cyan |
| // <8=> White |
| |
| #ifndef NRFX_WDT_CONFIG_DEBUG_COLOR |
| #define NRFX_WDT_CONFIG_DEBUG_COLOR 0 |
| #endif |
| |
| // </e> |
| |
| // </e> |
| |
| // </h> |
| |
| #endif // NRFX_CONFIG_H__ |
