﻿<?xml version="1.0" encoding="utf-8"?>
<!-- File naming: <vendor>_<part/series name>_svd.xml -->
<device schemaVersion="1.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" noNamespaceSchemaLocation="CMSIS-SVD.xsd">
  <vendor>Nordic Semiconductor</vendor>
  <vendorID>Nordic</vendorID>
  <name>nrf52</name>
  <series>nrf52</series>
  <version>1</version>
  <description>nRF52832 reference description for radio MCU with ARM 32-bit Cortex-M4 Microcontroller </description>
  <licenseText>
Copyright (c) 2010 - 2018, Nordic Semiconductor ASA All rights reserved.\n
\n
Redistribution and use in source and binary forms, with or without\n
modification, are permitted provided that the following conditions are met:\n
\n
1. Redistributions of source code must retain the above copyright notice, this\n
   list of conditions and the following disclaimer.\n
\n
2. Redistributions in binary form must reproduce the above copyright\n
   notice, this list of conditions and the following disclaimer in the\n
   documentation and/or other materials provided with the distribution.\n
\n
3. Neither the name of Nordic Semiconductor ASA nor the names of its\n
   contributors may be used to endorse or promote products derived from this\n
   software without specific prior written permission.\n
\n
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"\n
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE\n
IMPLIED WARRANTIES OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE\n
ARE DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE\n
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR\n
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF\n
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS\n
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN\n
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)\n
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE\n
POSSIBILITY OF SUCH DAMAGE.\n
        </licenseText>
  <addressUnitBits>8</addressUnitBits>
  <width>32</width>
  <size>32</size>
  <resetValue>0x00000000</resetValue>
  <resetMask>0xFFFFFFFF</resetMask>
  <cpu>
    <name>CM4</name>
    <revision>r0p1</revision>
    <endian>little</endian>
    <mpuPresent>1</mpuPresent>
    <fpuPresent>1</fpuPresent>
    <nvicPrioBits>3</nvicPrioBits>
    <vendorSystickConfig>0</vendorSystickConfig>
  </cpu>
  <headerSystemFilename>system_nrf52</headerSystemFilename>
  <headerDefinitionsPrefix>NRF_</headerDefinitionsPrefix>
  <vendorExtensions>
    <ExampleStackSize>2048</ExampleStackSize>
    <ExampleHeapSize>2048</ExampleHeapSize>
    <MaxInterrupts>112</MaxInterrupts>
  </vendorExtensions>
  <peripherals>
    <peripheral>
      <name>FICR</name>
      <description>Factory Information Configuration Registers</description>
      <groupName>FICR</groupName>
      <baseAddress>0x10000000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CODEPAGESIZE</name>
          <description>Code memory page size</description>
          <addressOffset>0x010</addressOffset>
          <access>read-only</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>CODEPAGESIZE</name>
              <description>Code memory page size</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>CODESIZE</name>
          <description>Code memory size</description>
          <addressOffset>0x014</addressOffset>
          <access>read-only</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>CODESIZE</name>
              <description>Code memory size in number of pages</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <name>DEVICEID[%s]</name>
          <description>Description collection[0]:  Device identifier</description>
          <addressOffset>0x060</addressOffset>
          <access>read-only</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>DEVICEID</name>
              <description>64 bit unique device identifier</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>4</dim>
          <dimIncrement>4</dimIncrement>
          <name>ER[%s]</name>
          <description>Description collection[0]:  Encryption Root, word 0</description>
          <addressOffset>0x080</addressOffset>
          <access>read-only</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>ER</name>
              <description>Encryption Root, word n</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>4</dim>
          <dimIncrement>4</dimIncrement>
          <name>IR[%s]</name>
          <description>Description collection[0]:  Identity Root, word 0</description>
          <addressOffset>0x090</addressOffset>
          <access>read-only</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>IR</name>
              <description>Identity Root, word n</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>DEVICEADDRTYPE</name>
          <description>Device address type</description>
          <addressOffset>0x0A0</addressOffset>
          <access>read-only</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>DEVICEADDRTYPE</name>
              <description>Device address type</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Public</name>
                  <description>Public address</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Random</name>
                  <description>Random address</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <name>DEVICEADDR[%s]</name>
          <description>Description collection[0]:  Device address 0</description>
          <addressOffset>0x0A4</addressOffset>
          <access>read-only</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>DEVICEADDR</name>
              <description>48 bit device address</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <cluster>
          <name>INFO</name>
          <description>Device info</description>
          <addressOffset>0x100</addressOffset>
          <register>
            <name>PART</name>
            <description>Part code</description>
            <addressOffset>0x000</addressOffset>
            <access>read-only</access>
            <resetValue>0x00052832</resetValue>
            <fields>
              <field>
                <name>PART</name>
                <description>Part code</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>N52832</name>
                    <description>nRF52832</description>
                    <value>0x52832</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Unspecified</name>
                    <description>Unspecified</description>
                    <value>0xFFFFFFFF</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>VARIANT</name>
            <description>Part Variant, Hardware version and Production configuration</description>
            <addressOffset>0x004</addressOffset>
            <access>read-only</access>
            <resetValue>0x41414142</resetValue>
            <fields>
              <field>
                <name>VARIANT</name>
                <description>Part Variant, Hardware version and Production configuration, encoded as ASCII</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>AAAA</name>
                    <description>AAAA</description>
                    <value>0x41414141</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AAAB</name>
                    <description>AAAB</description>
                    <value>0x41414142</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AABA</name>
                    <description>AABA</description>
                    <value>0x41414241</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AABB</name>
                    <description>AABB</description>
                    <value>0x41414242</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AAB0</name>
                    <description>AAB0</description>
                    <value>0x41414230</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AAE0</name>
                    <description>AAE0</description>
                    <value>0x41414530</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Unspecified</name>
                    <description>Unspecified</description>
                    <value>0xFFFFFFFF</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>PACKAGE</name>
            <description>Package option</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <resetValue>0x00002000</resetValue>
            <fields>
              <field>
                <name>PACKAGE</name>
                <description>Package option</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>QF</name>
                    <description>QFxx - 48-pin QFN</description>
                    <value>0x2000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>CH</name>
                    <description>CHxx - 7x8 WLCSP 56 balls</description>
                    <value>0x2001</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>CI</name>
                    <description>CIxx - 7x8 WLCSP 56 balls</description>
                    <value>0x2002</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>CK</name>
                    <description>CKxx - 7x8 WLCSP 56 balls with backside coating for light protection</description>
                    <value>0x2005</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Unspecified</name>
                    <description>Unspecified</description>
                    <value>0xFFFFFFFF</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>RAM</name>
            <description>RAM variant</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000040</resetValue>
            <fields>
              <field>
                <name>RAM</name>
                <description>RAM variant</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>K16</name>
                    <description>16 kByte RAM</description>
                    <value>0x10</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>K32</name>
                    <description>32 kByte RAM</description>
                    <value>0x20</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>K64</name>
                    <description>64 kByte RAM</description>
                    <value>0x40</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Unspecified</name>
                    <description>Unspecified</description>
                    <value>0xFFFFFFFF</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>FLASH</name>
            <description>Flash variant</description>
            <addressOffset>0x010</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000200</resetValue>
            <fields>
              <field>
                <name>FLASH</name>
                <description>Flash variant</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>K128</name>
                    <description>128 kByte FLASH</description>
                    <value>0x80</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>K256</name>
                    <description>256 kByte FLASH</description>
                    <value>0x100</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>K512</name>
                    <description>512 kByte FLASH</description>
                    <value>0x200</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Unspecified</name>
                    <description>Unspecified</description>
                    <value>0xFFFFFFFF</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <dim>3</dim>
            <dimIncrement>4</dimIncrement>
            <name>UNUSED0[%s]</name>
            <description>Description collection[0]: Unspecified</description>
            <addressOffset>0x014</addressOffset>
            <access>read-write</access>
          </register>
        </cluster>
        <cluster>
          <name>TEMP</name>
          <description>Registers storing factory TEMP module linearization coefficients</description>
          <addressOffset>0x404</addressOffset>
          <register>
            <name>A0</name>
            <description>Slope definition A0.</description>
            <addressOffset>0x000</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000320</resetValue>
            <fields>
              <field>
                <name>A</name>
                <description>A (slope definition) register.</description>
                <lsb>0</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>A1</name>
            <description>Slope definition A1.</description>
            <addressOffset>0x004</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000343</resetValue>
            <fields>
              <field>
                <name>A</name>
                <description>A (slope definition) register.</description>
                <lsb>0</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>A2</name>
            <description>Slope definition A2.</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <resetValue>0x0000035D</resetValue>
            <fields>
              <field>
                <name>A</name>
                <description>A (slope definition) register.</description>
                <lsb>0</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>A3</name>
            <description>Slope definition A3.</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000400</resetValue>
            <fields>
              <field>
                <name>A</name>
                <description>A (slope definition) register.</description>
                <lsb>0</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>A4</name>
            <description>Slope definition A4.</description>
            <addressOffset>0x010</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000452</resetValue>
            <fields>
              <field>
                <name>A</name>
                <description>A (slope definition) register.</description>
                <lsb>0</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>A5</name>
            <description>Slope definition A5.</description>
            <addressOffset>0x014</addressOffset>
            <access>read-only</access>
            <resetValue>0x0000037B</resetValue>
            <fields>
              <field>
                <name>A</name>
                <description>A (slope definition) register.</description>
                <lsb>0</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>B0</name>
            <description>y-intercept B0.</description>
            <addressOffset>0x018</addressOffset>
            <access>read-only</access>
            <resetValue>0x00003FCC</resetValue>
            <fields>
              <field>
                <name>B</name>
                <description>B (y-intercept)</description>
                <lsb>0</lsb>
                <msb>13</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>B1</name>
            <description>y-intercept B1.</description>
            <addressOffset>0x01C</addressOffset>
            <access>read-only</access>
            <resetValue>0x00003F98</resetValue>
            <fields>
              <field>
                <name>B</name>
                <description>B (y-intercept)</description>
                <lsb>0</lsb>
                <msb>13</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>B2</name>
            <description>y-intercept B2.</description>
            <addressOffset>0x020</addressOffset>
            <access>read-only</access>
            <resetValue>0x00003F98</resetValue>
            <fields>
              <field>
                <name>B</name>
                <description>B (y-intercept)</description>
                <lsb>0</lsb>
                <msb>13</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>B3</name>
            <description>y-intercept B3.</description>
            <addressOffset>0x024</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000012</resetValue>
            <fields>
              <field>
                <name>B</name>
                <description>B (y-intercept)</description>
                <lsb>0</lsb>
                <msb>13</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>B4</name>
            <description>y-intercept B4.</description>
            <addressOffset>0x028</addressOffset>
            <access>read-only</access>
            <resetValue>0x0000004D</resetValue>
            <fields>
              <field>
                <name>B</name>
                <description>B (y-intercept)</description>
                <lsb>0</lsb>
                <msb>13</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>B5</name>
            <description>y-intercept B5.</description>
            <addressOffset>0x02C</addressOffset>
            <access>read-only</access>
            <resetValue>0x00003E10</resetValue>
            <fields>
              <field>
                <name>B</name>
                <description>B (y-intercept)</description>
                <lsb>0</lsb>
                <msb>13</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>T0</name>
            <description>Segment end T0.</description>
            <addressOffset>0x030</addressOffset>
            <access>read-only</access>
            <resetValue>0x000000E2</resetValue>
            <fields>
              <field>
                <name>T</name>
                <description>T (segment end)register.</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>T1</name>
            <description>Segment end T1.</description>
            <addressOffset>0x034</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>T</name>
                <description>T (segment end)register.</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>T2</name>
            <description>Segment end T2.</description>
            <addressOffset>0x038</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000014</resetValue>
            <fields>
              <field>
                <name>T</name>
                <description>T (segment end)register.</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>T3</name>
            <description>Segment end T3.</description>
            <addressOffset>0x03C</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000019</resetValue>
            <fields>
              <field>
                <name>T</name>
                <description>T (segment end)register.</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>T4</name>
            <description>Segment end T4.</description>
            <addressOffset>0x040</addressOffset>
            <access>read-only</access>
            <resetValue>0x00000050</resetValue>
            <fields>
              <field>
                <name>T</name>
                <description>T (segment end)register.</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>NFC</name>
          <description>Unspecified</description>
          <addressOffset>0x450</addressOffset>
          <register>
            <name>TAGHEADER0</name>
            <description>Default header for NFC Tag. Software can read these values to populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST.</description>
            <addressOffset>0x000</addressOffset>
            <access>read-only</access>
            <resetValue>0xFFFFFF5F</resetValue>
            <fields>
              <field>
                <name>MFGID</name>
                <description>Default Manufacturer ID: Nordic Semiconductor ASA has ICM 0x5F</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
              <field>
                <name>UD1</name>
                <description>Unique identifier byte 1</description>
                <lsb>8</lsb>
                <msb>15</msb>
              </field>
              <field>
                <name>UD2</name>
                <description>Unique identifier byte 2</description>
                <lsb>16</lsb>
                <msb>23</msb>
              </field>
              <field>
                <name>UD3</name>
                <description>Unique identifier byte 3</description>
                <lsb>24</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>TAGHEADER1</name>
            <description>Default header for NFC Tag. Software can read these values to populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST.</description>
            <addressOffset>0x004</addressOffset>
            <access>read-only</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>UD4</name>
                <description>Unique identifier byte 4</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
              <field>
                <name>UD5</name>
                <description>Unique identifier byte 5</description>
                <lsb>8</lsb>
                <msb>15</msb>
              </field>
              <field>
                <name>UD6</name>
                <description>Unique identifier byte 6</description>
                <lsb>16</lsb>
                <msb>23</msb>
              </field>
              <field>
                <name>UD7</name>
                <description>Unique identifier byte 7</description>
                <lsb>24</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>TAGHEADER2</name>
            <description>Default header for NFC Tag. Software can read these values to populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST.</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>UD8</name>
                <description>Unique identifier byte 8</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
              <field>
                <name>UD9</name>
                <description>Unique identifier byte 9</description>
                <lsb>8</lsb>
                <msb>15</msb>
              </field>
              <field>
                <name>UD10</name>
                <description>Unique identifier byte 10</description>
                <lsb>16</lsb>
                <msb>23</msb>
              </field>
              <field>
                <name>UD11</name>
                <description>Unique identifier byte 11</description>
                <lsb>24</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>TAGHEADER3</name>
            <description>Default header for NFC Tag. Software can read these values to populate NFCID1_3RD_LAST, NFCID1_2ND_LAST and NFCID1_LAST.</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-only</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>UD12</name>
                <description>Unique identifier byte 12</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
              <field>
                <name>UD13</name>
                <description>Unique identifier byte 13</description>
                <lsb>8</lsb>
                <msb>15</msb>
              </field>
              <field>
                <name>UD14</name>
                <description>Unique identifier byte 14</description>
                <lsb>16</lsb>
                <msb>23</msb>
              </field>
              <field>
                <name>UD15</name>
                <description>Unique identifier byte 15</description>
                <lsb>24</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral>
      <name>UICR</name>
      <description>User Information Configuration Registers</description>
      <groupName>UICR</groupName>
      <baseAddress>0x10001000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>UNUSED0</name>
          <description>Unspecified</description>
          <addressOffset>0x000</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>UNUSED1</name>
          <description>Unspecified</description>
          <addressOffset>0x004</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>UNUSED2</name>
          <description>Unspecified</description>
          <addressOffset>0x008</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>UNUSED3</name>
          <description>Unspecified</description>
          <addressOffset>0x010</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <dim>15</dim>
          <dimIncrement>4</dimIncrement>
          <name>NRFFW[%s]</name>
          <description>Description collection[0]:  Reserved for Nordic firmware design</description>
          <addressOffset>0x014</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>NRFFW</name>
              <description>Reserved for Nordic firmware design</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>12</dim>
          <dimIncrement>4</dimIncrement>
          <name>NRFHW[%s]</name>
          <description>Description collection[0]:  Reserved for Nordic hardware design</description>
          <addressOffset>0x050</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>NRFHW</name>
              <description>Reserved for Nordic hardware design</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>32</dim>
          <dimIncrement>4</dimIncrement>
          <name>CUSTOMER[%s]</name>
          <description>Description collection[0]:  Reserved for customer</description>
          <addressOffset>0x080</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>CUSTOMER</name>
              <description>Reserved for customer</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <name>PSELRESET[%s]</name>
          <description>Description collection[0]:  Mapping of the nRESET function (see POWER chapter for details)</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>PIN</name>
              <description>GPIO number P0.n onto which Reset is exposed</description>
              <lsb>0</lsb>
              <msb>5</msb>
            </field>
            <field>
              <name>CONNECT</name>
              <description>Connection</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disconnected</name>
                  <description>Disconnect</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Connected</name>
                  <description>Connect</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>APPROTECT</name>
          <description>Access Port protection</description>
          <addressOffset>0x208</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>PALL</name>
              <description>Enable or disable Access Port protection. Any other value than 0xFF being written to this field will enable protection.</description>
              <lsb>0</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0xFF</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>0x00</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>NFCPINS</name>
          <description>Setting of pins dedicated to NFC functionality: NFC antenna or GPIO</description>
          <addressOffset>0x20C</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>PROTECT</name>
              <description>Setting of pins dedicated to NFC functionality</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Operation as GPIO pins. Same protection as normal GPIO pins</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NFC</name>
                  <description>Operation as NFC antenna pins. Configures the protection for NFC operation</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>BPROT</name>
      <description>Block Protect</description>
      <groupName>BPROT</groupName>
      <baseAddress>0x40000000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>CONFIG0</name>
          <description>Block protect configuration register 0</description>
          <addressOffset>0x600</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REGION0</name>
              <description>Enable protection for region 0. Write '0' has no effect.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1</name>
              <description>Enable protection for region 1. Write '0' has no effect.</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2</name>
              <description>Enable protection for region 2. Write '0' has no effect.</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3</name>
              <description>Enable protection for region 3. Write '0' has no effect.</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION4</name>
              <description>Enable protection for region 4. Write '0' has no effect.</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION5</name>
              <description>Enable protection for region 5. Write '0' has no effect.</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION6</name>
              <description>Enable protection for region 6. Write '0' has no effect.</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION7</name>
              <description>Enable protection for region 7. Write '0' has no effect.</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION8</name>
              <description>Enable protection for region 8. Write '0' has no effect.</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION9</name>
              <description>Enable protection for region 9. Write '0' has no effect.</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION10</name>
              <description>Enable protection for region 10. Write '0' has no effect.</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION11</name>
              <description>Enable protection for region 11. Write '0' has no effect.</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION12</name>
              <description>Enable protection for region 12. Write '0' has no effect.</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION13</name>
              <description>Enable protection for region 13. Write '0' has no effect.</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION14</name>
              <description>Enable protection for region 14. Write '0' has no effect.</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION15</name>
              <description>Enable protection for region 15. Write '0' has no effect.</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION16</name>
              <description>Enable protection for region 16. Write '0' has no effect.</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION17</name>
              <description>Enable protection for region 17. Write '0' has no effect.</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION18</name>
              <description>Enable protection for region 18. Write '0' has no effect.</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION19</name>
              <description>Enable protection for region 19. Write '0' has no effect.</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION20</name>
              <description>Enable protection for region 20. Write '0' has no effect.</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION21</name>
              <description>Enable protection for region 21. Write '0' has no effect.</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION22</name>
              <description>Enable protection for region 22. Write '0' has no effect.</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION23</name>
              <description>Enable protection for region 23. Write '0' has no effect.</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION24</name>
              <description>Enable protection for region 24. Write '0' has no effect.</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION25</name>
              <description>Enable protection for region 25. Write '0' has no effect.</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION26</name>
              <description>Enable protection for region 26. Write '0' has no effect.</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION27</name>
              <description>Enable protection for region 27. Write '0' has no effect.</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION28</name>
              <description>Enable protection for region 28. Write '0' has no effect.</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION29</name>
              <description>Enable protection for region 29. Write '0' has no effect.</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION30</name>
              <description>Enable protection for region 30. Write '0' has no effect.</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION31</name>
              <description>Enable protection for region 31. Write '0' has no effect.</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG1</name>
          <description>Block protect configuration register 1</description>
          <addressOffset>0x604</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REGION32</name>
              <description>Enable protection for region 32. Write '0' has no effect.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION33</name>
              <description>Enable protection for region 33. Write '0' has no effect.</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION34</name>
              <description>Enable protection for region 34. Write '0' has no effect.</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION35</name>
              <description>Enable protection for region 35. Write '0' has no effect.</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION36</name>
              <description>Enable protection for region 36. Write '0' has no effect.</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION37</name>
              <description>Enable protection for region 37. Write '0' has no effect.</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION38</name>
              <description>Enable protection for region 38. Write '0' has no effect.</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION39</name>
              <description>Enable protection for region 39. Write '0' has no effect.</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION40</name>
              <description>Enable protection for region 40. Write '0' has no effect.</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION41</name>
              <description>Enable protection for region 41. Write '0' has no effect.</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION42</name>
              <description>Enable protection for region 42. Write '0' has no effect.</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION43</name>
              <description>Enable protection for region 43. Write '0' has no effect.</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION44</name>
              <description>Enable protection for region 44. Write '0' has no effect.</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION45</name>
              <description>Enable protection for region 45. Write '0' has no effect.</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION46</name>
              <description>Enable protection for region 46. Write '0' has no effect.</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION47</name>
              <description>Enable protection for region 47. Write '0' has no effect.</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION48</name>
              <description>Enable protection for region 48. Write '0' has no effect.</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION49</name>
              <description>Enable protection for region 49. Write '0' has no effect.</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION50</name>
              <description>Enable protection for region 50. Write '0' has no effect.</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION51</name>
              <description>Enable protection for region 51. Write '0' has no effect.</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION52</name>
              <description>Enable protection for region 52. Write '0' has no effect.</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION53</name>
              <description>Enable protection for region 53. Write '0' has no effect.</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION54</name>
              <description>Enable protection for region 54. Write '0' has no effect.</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION55</name>
              <description>Enable protection for region 55. Write '0' has no effect.</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION56</name>
              <description>Enable protection for region 56. Write '0' has no effect.</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION57</name>
              <description>Enable protection for region 57. Write '0' has no effect.</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION58</name>
              <description>Enable protection for region 58. Write '0' has no effect.</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION59</name>
              <description>Enable protection for region 59. Write '0' has no effect.</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION60</name>
              <description>Enable protection for region 60. Write '0' has no effect.</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION61</name>
              <description>Enable protection for region 61. Write '0' has no effect.</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION62</name>
              <description>Enable protection for region 62. Write '0' has no effect.</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION63</name>
              <description>Enable protection for region 63. Write '0' has no effect.</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DISABLEINDEBUG</name>
          <description>Disable protection mechanism in debug interface mode</description>
          <addressOffset>0x608</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>DISABLEINDEBUG</name>
              <description>Disable the protection mechanism for NVM regions while in debug interface mode. This register will only disable the protection mechanism if the device is in debug interface mode.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable in debug</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable in debug</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>UNUSED0</name>
          <description>Unspecified</description>
          <addressOffset>0x60C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>CONFIG2</name>
          <description>Block protect configuration register 2</description>
          <addressOffset>0x610</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REGION64</name>
              <description>Enable protection for region 64. Write '0' has no effect.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION65</name>
              <description>Enable protection for region 65. Write '0' has no effect.</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION66</name>
              <description>Enable protection for region 66. Write '0' has no effect.</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION67</name>
              <description>Enable protection for region 67. Write '0' has no effect.</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION68</name>
              <description>Enable protection for region 68. Write '0' has no effect.</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION69</name>
              <description>Enable protection for region 69. Write '0' has no effect.</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION70</name>
              <description>Enable protection for region 70. Write '0' has no effect.</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION71</name>
              <description>Enable protection for region 71. Write '0' has no effect.</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION72</name>
              <description>Enable protection for region 72. Write '0' has no effect.</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION73</name>
              <description>Enable protection for region 73. Write '0' has no effect.</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION74</name>
              <description>Enable protection for region 74. Write '0' has no effect.</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION75</name>
              <description>Enable protection for region 75. Write '0' has no effect.</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION76</name>
              <description>Enable protection for region 76. Write '0' has no effect.</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION77</name>
              <description>Enable protection for region 77. Write '0' has no effect.</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION78</name>
              <description>Enable protection for region 78. Write '0' has no effect.</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION79</name>
              <description>Enable protection for region 79. Write '0' has no effect.</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION80</name>
              <description>Enable protection for region 80. Write '0' has no effect.</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION81</name>
              <description>Enable protection for region 81. Write '0' has no effect.</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION82</name>
              <description>Enable protection for region 82. Write '0' has no effect.</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION83</name>
              <description>Enable protection for region 83. Write '0' has no effect.</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION84</name>
              <description>Enable protection for region 84. Write '0' has no effect.</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION85</name>
              <description>Enable protection for region 85. Write '0' has no effect.</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION86</name>
              <description>Enable protection for region 86. Write '0' has no effect.</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION87</name>
              <description>Enable protection for region 87. Write '0' has no effect.</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION88</name>
              <description>Enable protection for region 88. Write '0' has no effect.</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION89</name>
              <description>Enable protection for region 89. Write '0' has no effect.</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION90</name>
              <description>Enable protection for region 90. Write '0' has no effect.</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION91</name>
              <description>Enable protection for region 91. Write '0' has no effect.</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION92</name>
              <description>Enable protection for region 92. Write '0' has no effect.</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION93</name>
              <description>Enable protection for region 93. Write '0' has no effect.</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION94</name>
              <description>Enable protection for region 94. Write '0' has no effect.</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION95</name>
              <description>Enable protection for region 95. Write '0' has no effect.</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG3</name>
          <description>Block protect configuration register 3</description>
          <addressOffset>0x614</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REGION96</name>
              <description>Enable protection for region 96. Write '0' has no effect.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION97</name>
              <description>Enable protection for region 97. Write '0' has no effect.</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION98</name>
              <description>Enable protection for region 98. Write '0' has no effect.</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION99</name>
              <description>Enable protection for region 99. Write '0' has no effect.</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION100</name>
              <description>Enable protection for region 100. Write '0' has no effect.</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION101</name>
              <description>Enable protection for region 101. Write '0' has no effect.</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION102</name>
              <description>Enable protection for region 102. Write '0' has no effect.</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION103</name>
              <description>Enable protection for region 103. Write '0' has no effect.</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION104</name>
              <description>Enable protection for region 104. Write '0' has no effect.</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION105</name>
              <description>Enable protection for region 105. Write '0' has no effect.</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION106</name>
              <description>Enable protection for region 106. Write '0' has no effect.</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION107</name>
              <description>Enable protection for region 107. Write '0' has no effect.</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION108</name>
              <description>Enable protection for region 108. Write '0' has no effect.</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION109</name>
              <description>Enable protection for region 109. Write '0' has no effect.</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION110</name>
              <description>Enable protection for region 110. Write '0' has no effect.</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION111</name>
              <description>Enable protection for region 111. Write '0' has no effect.</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION112</name>
              <description>Enable protection for region 112. Write '0' has no effect.</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION113</name>
              <description>Enable protection for region 113. Write '0' has no effect.</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION114</name>
              <description>Enable protection for region 114. Write '0' has no effect.</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION115</name>
              <description>Enable protection for region 115. Write '0' has no effect.</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION116</name>
              <description>Enable protection for region 116. Write '0' has no effect.</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION117</name>
              <description>Enable protection for region 117. Write '0' has no effect.</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION118</name>
              <description>Enable protection for region 118. Write '0' has no effect.</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION119</name>
              <description>Enable protection for region 119. Write '0' has no effect.</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION120</name>
              <description>Enable protection for region 120. Write '0' has no effect.</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION121</name>
              <description>Enable protection for region 121. Write '0' has no effect.</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION122</name>
              <description>Enable protection for region 122. Write '0' has no effect.</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION123</name>
              <description>Enable protection for region 123. Write '0' has no effect.</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION124</name>
              <description>Enable protection for region 124. Write '0' has no effect.</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION125</name>
              <description>Enable protection for region 125. Write '0' has no effect.</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION126</name>
              <description>Enable protection for region 126. Write '0' has no effect.</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION127</name>
              <description>Enable protection for region 127. Write '0' has no effect.</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Protection disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Protection enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>POWER</name>
      <description>Power control</description>
      <groupName>POWER</groupName>
      <baseAddress>0x40000000</baseAddress>
      <size>32</size>
      <alternatePeripheral>BPROT</alternatePeripheral>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>POWER_CLOCK</name>
        <value>0</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_CONSTLAT</name>
          <description>Enable constant latency mode</description>
          <addressOffset>0x078</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_LOWPWR</name>
          <description>Enable low power mode (variable latency)</description>
          <addressOffset>0x07C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_POFWARN</name>
          <description>Power failure warning</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_SLEEPENTER</name>
          <description>CPU entered WFI/WFE sleep</description>
          <addressOffset>0x114</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_SLEEPEXIT</name>
          <description>CPU exited WFI/WFE sleep</description>
          <addressOffset>0x118</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>POFWARN</name>
              <description>Write '1' to Enable interrupt for POFWARN event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SLEEPENTER</name>
              <description>Write '1' to Enable interrupt for SLEEPENTER event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SLEEPEXIT</name>
              <description>Write '1' to Enable interrupt for SLEEPEXIT event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>POFWARN</name>
              <description>Write '1' to Disable interrupt for POFWARN event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SLEEPENTER</name>
              <description>Write '1' to Disable interrupt for SLEEPENTER event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SLEEPEXIT</name>
              <description>Write '1' to Disable interrupt for SLEEPEXIT event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RESETREAS</name>
          <description>Reset reason</description>
          <addressOffset>0x400</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>RESETPIN</name>
              <description>Reset from pin-reset detected</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DOG</name>
              <description>Reset from watchdog detected</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SREQ</name>
              <description>Reset from soft reset detected</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCKUP</name>
              <description>Reset from CPU lock-up detected</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OFF</name>
              <description>Reset due to wake up from System OFF mode when wakeup is triggered from DETECT signal from GPIO</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LPCOMP</name>
              <description>Reset due to wake up from System OFF mode when wakeup is triggered from ANADETECT signal from LPCOMP</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DIF</name>
              <description>Reset due to wake up from System OFF mode when wakeup is triggered from entering into debug interface mode</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NFC</name>
              <description>Reset due to wake up from System OFF mode by NFC field detect</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Not detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RAMSTATUS</name>
          <description>Deprecated register -  RAM status register</description>
          <addressOffset>0x428</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>RAMBLOCK0</name>
              <description>RAM block 0 is on or off/powering up</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Off</name>
                  <description>Off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>On</name>
                  <description>On</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RAMBLOCK1</name>
              <description>RAM block 1 is on or off/powering up</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Off</name>
                  <description>Off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>On</name>
                  <description>On</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RAMBLOCK2</name>
              <description>RAM block 2 is on or off/powering up</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Off</name>
                  <description>Off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>On</name>
                  <description>On</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RAMBLOCK3</name>
              <description>RAM block 3 is on or off/powering up</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Off</name>
                  <description>Off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>On</name>
                  <description>On</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SYSTEMOFF</name>
          <description>System OFF register</description>
          <addressOffset>0x500</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>SYSTEMOFF</name>
              <description>Enable System OFF mode</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Enter</name>
                  <description>Enable System OFF mode</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>POFCON</name>
          <description>Power failure comparator configuration</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>POF</name>
              <description>Enable or disable power failure comparator</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>THRESHOLD</name>
              <description>Power failure comparator threshold setting</description>
              <lsb>1</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>V17</name>
                  <description>Set threshold to 1.7 V</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V18</name>
                  <description>Set threshold to 1.8 V</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V19</name>
                  <description>Set threshold to 1.9 V</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V20</name>
                  <description>Set threshold to 2.0 V</description>
                  <value>7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V21</name>
                  <description>Set threshold to 2.1 V</description>
                  <value>8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V22</name>
                  <description>Set threshold to 2.2 V</description>
                  <value>9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V23</name>
                  <description>Set threshold to 2.3 V</description>
                  <value>10</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V24</name>
                  <description>Set threshold to 2.4 V</description>
                  <value>11</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V25</name>
                  <description>Set threshold to 2.5 V</description>
                  <value>12</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V26</name>
                  <description>Set threshold to 2.6 V</description>
                  <value>13</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V27</name>
                  <description>Set threshold to 2.7 V</description>
                  <value>14</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>V28</name>
                  <description>Set threshold to 2.8 V</description>
                  <value>15</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>GPREGRET</name>
          <description>General purpose retention register</description>
          <addressOffset>0x51C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>GPREGRET</name>
              <description>General purpose retention register</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>GPREGRET2</name>
          <description>General purpose retention register</description>
          <addressOffset>0x520</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>GPREGRET</name>
              <description>General purpose retention register</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>RAMON</name>
          <description>Deprecated register -  RAM on/off register (this register is retained)</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000003</resetValue>
          <fields>
            <field>
              <name>ONRAM0</name>
              <description>Keep RAM block 0 on or off in system ON Mode</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RAM0Off</name>
                  <description>Off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RAM0On</name>
                  <description>On</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ONRAM1</name>
              <description>Keep RAM block 1 on or off in system ON Mode</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RAM1Off</name>
                  <description>Off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RAM1On</name>
                  <description>On</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OFFRAM0</name>
              <description>Keep retention on RAM block 0 when RAM block is switched off</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RAM0Off</name>
                  <description>Off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RAM0On</name>
                  <description>On</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OFFRAM1</name>
              <description>Keep retention on RAM block 1 when RAM block is switched off</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RAM1Off</name>
                  <description>Off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RAM1On</name>
                  <description>On</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RAMONB</name>
          <description>Deprecated register -  RAM on/off register (this register is retained)</description>
          <addressOffset>0x554</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000003</resetValue>
          <fields>
            <field>
              <name>ONRAM2</name>
              <description>Keep RAM block 2 on or off in system ON Mode</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RAM2Off</name>
                  <description>Off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RAM2On</name>
                  <description>On</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ONRAM3</name>
              <description>Keep RAM block 3 on or off in system ON Mode</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RAM3Off</name>
                  <description>Off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RAM3On</name>
                  <description>On</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OFFRAM2</name>
              <description>Keep retention on RAM block 2 when RAM block is switched off</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RAM2Off</name>
                  <description>Off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RAM2On</name>
                  <description>On</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OFFRAM3</name>
              <description>Keep retention on RAM block 3 when RAM block is switched off</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RAM3Off</name>
                  <description>Off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RAM3On</name>
                  <description>On</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DCDCEN</name>
          <description>DC/DC enable register</description>
          <addressOffset>0x578</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DCDCEN</name>
              <description>Enable or disable DC/DC converter</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <dim>8</dim>
          <dimIncrement>16</dimIncrement>
          <name>RAM[%s]</name>
          <description>Unspecified</description>
          <addressOffset>0x900</addressOffset>
          <register>
            <name>POWER</name>
            <description>Description cluster[0]:  RAM0 power control register</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0x0000FFFF</resetValue>
            <fields>
              <field>
                <name>S0POWER</name>
                <description>Keep RAM section S0 ON or OFF in System ON mode.</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S1POWER</name>
                <description>Keep RAM section S1 ON or OFF in System ON mode.</description>
                <lsb>1</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S0RETENTION</name>
                <description>Keep retention on RAM section S0 when RAM section is in OFF</description>
                <lsb>16</lsb>
                <msb>16</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S1RETENTION</name>
                <description>Keep retention on RAM section S1 when RAM section is in OFF</description>
                <lsb>17</lsb>
                <msb>17</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>POWERSET</name>
            <description>Description cluster[0]:  RAM0 power control set register</description>
            <addressOffset>0x004</addressOffset>
            <access>write-only</access>
            <resetValue>0x0000FFFF</resetValue>
            <fields>
              <field>
                <name>S0POWER</name>
                <description>Keep RAM section S0 of RAM0 on or off in System ON mode</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S1POWER</name>
                <description>Keep RAM section S1 of RAM0 on or off in System ON mode</description>
                <lsb>1</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S0RETENTION</name>
                <description>Keep retention on RAM section S0 when RAM section is switched off</description>
                <lsb>16</lsb>
                <msb>16</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S1RETENTION</name>
                <description>Keep retention on RAM section S1 when RAM section is switched off</description>
                <lsb>17</lsb>
                <msb>17</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>On</name>
                    <description>On</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>POWERCLR</name>
            <description>Description cluster[0]:  RAM0 power control clear register</description>
            <addressOffset>0x008</addressOffset>
            <access>write-only</access>
            <resetValue>0x0000FFFF</resetValue>
            <fields>
              <field>
                <name>S0POWER</name>
                <description>Keep RAM section S0 of RAM0 on or off in System ON mode</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S1POWER</name>
                <description>Keep RAM section S1 of RAM0 on or off in System ON mode</description>
                <lsb>1</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S0RETENTION</name>
                <description>Keep retention on RAM section S0 when RAM section is switched off</description>
                <lsb>16</lsb>
                <msb>16</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>S1RETENTION</name>
                <description>Keep retention on RAM section S1 when RAM section is switched off</description>
                <lsb>17</lsb>
                <msb>17</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Off</name>
                    <description>Off</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral>
      <name>CLOCK</name>
      <description>Clock control</description>
      <groupName>CLOCK</groupName>
      <baseAddress>0x40000000</baseAddress>
      <size>32</size>
      <alternatePeripheral>BPROT</alternatePeripheral>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>POWER_CLOCK</name>
        <value>0</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_HFCLKSTART</name>
          <description>Start HFCLK crystal oscillator</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_HFCLKSTOP</name>
          <description>Stop HFCLK crystal oscillator</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_LFCLKSTART</name>
          <description>Start LFCLK source</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_LFCLKSTOP</name>
          <description>Stop LFCLK source</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_CAL</name>
          <description>Start calibration of LFRC oscillator</description>
          <addressOffset>0x010</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_CTSTART</name>
          <description>Start calibration timer</description>
          <addressOffset>0x014</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_CTSTOP</name>
          <description>Stop calibration timer</description>
          <addressOffset>0x018</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_HFCLKSTARTED</name>
          <description>HFCLK oscillator started</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_LFCLKSTARTED</name>
          <description>LFCLK started</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_DONE</name>
          <description>Calibration of LFCLK RC oscillator complete event</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_CTTO</name>
          <description>Calibration timer timeout</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>HFCLKSTARTED</name>
              <description>Write '1' to Enable interrupt for HFCLKSTARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LFCLKSTARTED</name>
              <description>Write '1' to Enable interrupt for LFCLKSTARTED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <description>Write '1' to Enable interrupt for DONE event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CTTO</name>
              <description>Write '1' to Enable interrupt for CTTO event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>HFCLKSTARTED</name>
              <description>Write '1' to Disable interrupt for HFCLKSTARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LFCLKSTARTED</name>
              <description>Write '1' to Disable interrupt for LFCLKSTARTED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <description>Write '1' to Disable interrupt for DONE event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CTTO</name>
              <description>Write '1' to Disable interrupt for CTTO event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>HFCLKRUN</name>
          <description>Status indicating that HFCLKSTART task has been triggered</description>
          <addressOffset>0x408</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>STATUS</name>
              <description>HFCLKSTART task triggered or not</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotTriggered</name>
                  <description>Task not triggered</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Triggered</name>
                  <description>Task triggered</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>HFCLKSTAT</name>
          <description>HFCLK status</description>
          <addressOffset>0x40C</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>SRC</name>
              <description>Source of HFCLK</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RC</name>
                  <description>64 MHz internal oscillator (HFINT)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Xtal</name>
                  <description>64 MHz crystal oscillator (HFXO)</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STATE</name>
              <description>HFCLK state</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotRunning</name>
                  <description>HFCLK not running</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Running</name>
                  <description>HFCLK running</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LFCLKRUN</name>
          <description>Status indicating that LFCLKSTART task has been triggered</description>
          <addressOffset>0x414</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>STATUS</name>
              <description>LFCLKSTART task triggered or not</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotTriggered</name>
                  <description>Task not triggered</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Triggered</name>
                  <description>Task triggered</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LFCLKSTAT</name>
          <description>LFCLK status</description>
          <addressOffset>0x418</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>SRC</name>
              <description>Source of LFCLK</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RC</name>
                  <description>32.768 kHz RC oscillator</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Xtal</name>
                  <description>32.768 kHz crystal oscillator</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Synth</name>
                  <description>32.768 kHz synthesized from HFCLK</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STATE</name>
              <description>LFCLK state</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotRunning</name>
                  <description>LFCLK not running</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Running</name>
                  <description>LFCLK running</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LFCLKSRCCOPY</name>
          <description>Copy of LFCLKSRC register, set when LFCLKSTART task was triggered</description>
          <addressOffset>0x41C</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>SRC</name>
              <description>Clock source</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RC</name>
                  <description>32.768 kHz RC oscillator</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Xtal</name>
                  <description>32.768 kHz crystal oscillator</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Synth</name>
                  <description>32.768 kHz synthesized from HFCLK</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LFCLKSRC</name>
          <description>Clock source for the LFCLK</description>
          <addressOffset>0x518</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SRC</name>
              <description>Clock source</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RC</name>
                  <description>32.768 kHz RC oscillator</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Xtal</name>
                  <description>32.768 kHz crystal oscillator</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Synth</name>
                  <description>32.768 kHz synthesized from HFCLK</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BYPASS</name>
              <description>Enable or disable bypass of LFCLK crystal oscillator with external clock source</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable (use with Xtal or low-swing external source)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable (use with rail-to-rail external source)</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EXTERNAL</name>
              <description>Enable or disable external source for LFCLK</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable external source (use with Xtal)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable use of external source instead of Xtal (SRC needs to be set to Xtal)</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CTIV</name>
          <description>Calibration timer interval</description>
          <addressOffset>0x538</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CTIV</name>
              <description>Calibration timer interval in multiple of 0.25 seconds. Range: 0.25 seconds to 31.75 seconds.</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TRACECONFIG</name>
          <description>Clocking options for the Trace Port debug interface</description>
          <addressOffset>0x55C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>TRACEPORTSPEED</name>
              <description>Speed of Trace Port clock. Note that the TRACECLK pin will output this clock divided by two.</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>32MHz</name>
                  <description>32 MHz Trace Port clock (TRACECLK = 16 MHz)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16MHz</name>
                  <description>16 MHz Trace Port clock (TRACECLK = 8 MHz)</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8MHz</name>
                  <description>8 MHz Trace Port clock (TRACECLK = 4 MHz)</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4MHz</name>
                  <description>4 MHz Trace Port clock (TRACECLK = 2 MHz)</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRACEMUX</name>
              <description>Pin multiplexing of trace signals.</description>
              <lsb>16</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>GPIO</name>
                  <description>GPIOs multiplexed onto all trace-pins</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Serial</name>
                  <description>SWO multiplexed onto P0.18, GPIO multiplexed onto other trace pins</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Parallel</name>
                  <description>TRACECLK and TRACEDATA multiplexed onto P0.20, P0.18, P0.16, P0.15 and P0.14.</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>RADIO</name>
      <description>2.4 GHz Radio</description>
      <groupName>RADIO</groupName>
      <baseAddress>0x40001000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>RADIO</name>
        <value>1</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_TXEN</name>
          <description>Enable RADIO in TX mode</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_RXEN</name>
          <description>Enable RADIO in RX mode</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_START</name>
          <description>Start RADIO</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop RADIO</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_DISABLE</name>
          <description>Disable RADIO</description>
          <addressOffset>0x010</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_RSSISTART</name>
          <description>Start the RSSI and take one single sample of the receive signal strength.</description>
          <addressOffset>0x014</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_RSSISTOP</name>
          <description>Stop the RSSI measurement</description>
          <addressOffset>0x018</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_BCSTART</name>
          <description>Start the bit counter</description>
          <addressOffset>0x01C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_BCSTOP</name>
          <description>Stop the bit counter</description>
          <addressOffset>0x020</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_READY</name>
          <description>RADIO has ramped up and is ready to be started</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ADDRESS</name>
          <description>Address sent or received</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_PAYLOAD</name>
          <description>Packet payload sent or received</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_END</name>
          <description>Packet sent or received</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_DISABLED</name>
          <description>RADIO has been disabled</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_DEVMATCH</name>
          <description>A device address match occurred on the last received packet</description>
          <addressOffset>0x114</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_DEVMISS</name>
          <description>No device address match occurred on the last received packet</description>
          <addressOffset>0x118</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RSSIEND</name>
          <description>Sampling of receive signal strength complete.</description>
          <addressOffset>0x11C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_BCMATCH</name>
          <description>Bit counter reached bit count value.</description>
          <addressOffset>0x128</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_CRCOK</name>
          <description>Packet received with CRC ok</description>
          <addressOffset>0x130</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_CRCERROR</name>
          <description>Packet received with CRC error</description>
          <addressOffset>0x134</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY_START</name>
              <description>Shortcut between READY event and START task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END_DISABLE</name>
              <description>Shortcut between END event and DISABLE task</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DISABLED_TXEN</name>
              <description>Shortcut between DISABLED event and TXEN task</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DISABLED_RXEN</name>
              <description>Shortcut between DISABLED event and RXEN task</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDRESS_RSSISTART</name>
              <description>Shortcut between ADDRESS event and RSSISTART task</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END_START</name>
              <description>Shortcut between END event and START task</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDRESS_BCSTART</name>
              <description>Shortcut between ADDRESS event and BCSTART task</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DISABLED_RSSISTOP</name>
              <description>Shortcut between DISABLED event and RSSISTOP task</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to Enable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDRESS</name>
              <description>Write '1' to Enable interrupt for ADDRESS event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PAYLOAD</name>
              <description>Write '1' to Enable interrupt for PAYLOAD event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to Enable interrupt for END event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DISABLED</name>
              <description>Write '1' to Enable interrupt for DISABLED event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DEVMATCH</name>
              <description>Write '1' to Enable interrupt for DEVMATCH event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DEVMISS</name>
              <description>Write '1' to Enable interrupt for DEVMISS event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RSSIEND</name>
              <description>Write '1' to Enable interrupt for RSSIEND event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCMATCH</name>
              <description>Write '1' to Enable interrupt for BCMATCH event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CRCOK</name>
              <description>Write '1' to Enable interrupt for CRCOK event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CRCERROR</name>
              <description>Write '1' to Enable interrupt for CRCERROR event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to Disable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDRESS</name>
              <description>Write '1' to Disable interrupt for ADDRESS event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PAYLOAD</name>
              <description>Write '1' to Disable interrupt for PAYLOAD event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to Disable interrupt for END event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DISABLED</name>
              <description>Write '1' to Disable interrupt for DISABLED event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DEVMATCH</name>
              <description>Write '1' to Disable interrupt for DEVMATCH event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DEVMISS</name>
              <description>Write '1' to Disable interrupt for DEVMISS event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RSSIEND</name>
              <description>Write '1' to Disable interrupt for RSSIEND event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BCMATCH</name>
              <description>Write '1' to Disable interrupt for BCMATCH event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CRCOK</name>
              <description>Write '1' to Disable interrupt for CRCOK event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CRCERROR</name>
              <description>Write '1' to Disable interrupt for CRCERROR event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CRCSTATUS</name>
          <description>CRC status</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>CRCSTATUS</name>
              <description>CRC status of packet received</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CRCError</name>
                  <description>Packet received with CRC error</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CRCOk</name>
                  <description>Packet received with CRC ok</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RXMATCH</name>
          <description>Received address</description>
          <addressOffset>0x408</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXMATCH</name>
              <description>Received address</description>
              <lsb>0</lsb>
              <msb>2</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>RXCRC</name>
          <description>CRC field of previously received packet</description>
          <addressOffset>0x40C</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>RXCRC</name>
              <description>CRC field of previously received packet</description>
              <lsb>0</lsb>
              <msb>23</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>DAI</name>
          <description>Device address match index</description>
          <addressOffset>0x410</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>DAI</name>
              <description>Device address match index</description>
              <lsb>0</lsb>
              <msb>2</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>PACKETPTR</name>
          <description>Packet pointer</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PACKETPTR</name>
              <description>Packet pointer</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>FREQUENCY</name>
          <description>Frequency</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000002</resetValue>
          <fields>
            <field>
              <name>FREQUENCY</name>
              <description>Radio channel frequency</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
            <field>
              <name>MAP</name>
              <description>Channel map selection.</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Default</name>
                  <description>Channel map between 2400 MHZ .. 2500 MHz</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Channel map between 2360 MHZ .. 2460 MHz</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>TXPOWER</name>
          <description>Output power</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TXPOWER</name>
              <description>RADIO output power.</description>
              <lsb>0</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Pos4dBm</name>
                  <description>+4 dBm</description>
                  <value>0x04</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Pos3dBm</name>
                  <description>+3 dBm</description>
                  <value>0x03</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>0dBm</name>
                  <description>0 dBm</description>
                  <value>0x00</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg4dBm</name>
                  <description>-4 dBm</description>
                  <value>0xFC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg8dBm</name>
                  <description>-8 dBm</description>
                  <value>0xF8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg12dBm</name>
                  <description>-12 dBm</description>
                  <value>0xF4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg16dBm</name>
                  <description>-16 dBm</description>
                  <value>0xF0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg20dBm</name>
                  <description>-20 dBm</description>
                  <value>0xEC</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg30dBm</name>
                  <description>Deprecated enumerator -  -40 dBm</description>
                  <value>0xD8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Neg40dBm</name>
                  <description>-40 dBm</description>
                  <value>0xD8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE</name>
          <description>Data rate and modulation</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>MODE</name>
              <description>Radio data rate and modulation setting. The radio supports Frequency-shift Keying (FSK) modulation.</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Nrf_1Mbit</name>
                  <description>1 Mbit/s Nordic proprietary radio mode</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Nrf_2Mbit</name>
                  <description>2 Mbit/s Nordic proprietary radio mode</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Nrf_250Kbit</name>
                  <description>Deprecated enumerator -  250 kbit/s Nordic proprietary radio mode</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ble_1Mbit</name>
                  <description>1 Mbit/s Bluetooth Low Energy</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ble_2Mbit</name>
                  <description>2 Mbit/s Bluetooth Low Energy</description>
                  <value>4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PCNF0</name>
          <description>Packet configuration register 0</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>LFLEN</name>
              <description>Length on air of LENGTH field in number of bits.</description>
              <lsb>0</lsb>
              <msb>3</msb>
            </field>
            <field>
              <name>S0LEN</name>
              <description>Length on air of S0 field in number of bytes.</description>
              <lsb>8</lsb>
              <msb>8</msb>
            </field>
            <field>
              <name>S1LEN</name>
              <description>Length on air of S1 field in number of bits.</description>
              <lsb>16</lsb>
              <msb>19</msb>
            </field>
            <field>
              <name>S1INCL</name>
              <description>Include or exclude S1 field in RAM</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Automatic</name>
                  <description>Include S1 field in RAM only if S1LEN &amp;gt; 0</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Include</name>
                  <description>Always include S1 field in RAM independent of S1LEN</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PLEN</name>
              <description>Length of preamble on air. Decision point: TASKS_START task</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>8bit</name>
                  <description>8-bit preamble</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16bit</name>
                  <description>16-bit preamble</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PCNF1</name>
          <description>Packet configuration register 1</description>
          <addressOffset>0x518</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>MAXLEN</name>
              <description>Maximum length of packet payload. If the packet payload is larger than MAXLEN, the radio will truncate the payload to MAXLEN.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
            <field>
              <name>STATLEN</name>
              <description>Static length in number of bytes</description>
              <lsb>8</lsb>
              <msb>15</msb>
            </field>
            <field>
              <name>BALEN</name>
              <description>Base address length in number of bytes</description>
              <lsb>16</lsb>
              <msb>18</msb>
            </field>
            <field>
              <name>ENDIAN</name>
              <description>On air endianness of packet, this applies to the S0, LENGTH, S1 and the PAYLOAD fields.</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Little</name>
                  <description>Least Significant bit on air first</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Big</name>
                  <description>Most significant bit on air first</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WHITEEN</name>
              <description>Enable or disable packet whitening</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>BASE0</name>
          <description>Base address 0</description>
          <addressOffset>0x51C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>BASE0</name>
              <description>Base address 0</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>BASE1</name>
          <description>Base address 1</description>
          <addressOffset>0x520</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>BASE1</name>
              <description>Base address 1</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>PREFIX0</name>
          <description>Prefixes bytes for logical addresses 0-3</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>AP0</name>
              <description>Address prefix 0.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
            <field>
              <name>AP1</name>
              <description>Address prefix 1.</description>
              <lsb>8</lsb>
              <msb>15</msb>
            </field>
            <field>
              <name>AP2</name>
              <description>Address prefix 2.</description>
              <lsb>16</lsb>
              <msb>23</msb>
            </field>
            <field>
              <name>AP3</name>
              <description>Address prefix 3.</description>
              <lsb>24</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>PREFIX1</name>
          <description>Prefixes bytes for logical addresses 4-7</description>
          <addressOffset>0x528</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>AP4</name>
              <description>Address prefix 4.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
            <field>
              <name>AP5</name>
              <description>Address prefix 5.</description>
              <lsb>8</lsb>
              <msb>15</msb>
            </field>
            <field>
              <name>AP6</name>
              <description>Address prefix 6.</description>
              <lsb>16</lsb>
              <msb>23</msb>
            </field>
            <field>
              <name>AP7</name>
              <description>Address prefix 7.</description>
              <lsb>24</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TXADDRESS</name>
          <description>Transmit address select</description>
          <addressOffset>0x52C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TXADDRESS</name>
              <description>Transmit address select</description>
              <lsb>0</lsb>
              <msb>2</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>RXADDRESSES</name>
          <description>Receive address select</description>
          <addressOffset>0x530</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ADDR0</name>
              <description>Enable or disable reception on logical address 0.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR1</name>
              <description>Enable or disable reception on logical address 1.</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR2</name>
              <description>Enable or disable reception on logical address 2.</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR3</name>
              <description>Enable or disable reception on logical address 3.</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR4</name>
              <description>Enable or disable reception on logical address 4.</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR5</name>
              <description>Enable or disable reception on logical address 5.</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR6</name>
              <description>Enable or disable reception on logical address 6.</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDR7</name>
              <description>Enable or disable reception on logical address 7.</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CRCCNF</name>
          <description>CRC configuration</description>
          <addressOffset>0x534</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>LEN</name>
              <description>CRC length in number of bytes.</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>CRC length is zero and CRC calculation is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>One</name>
                  <description>CRC length is one byte and CRC calculation is enabled</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Two</name>
                  <description>CRC length is two bytes and CRC calculation is enabled</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Three</name>
                  <description>CRC length is three bytes and CRC calculation is enabled</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SKIPADDR</name>
              <description>Include or exclude packet address field out of CRC calculation.</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Include</name>
                  <description>CRC calculation includes address field</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Skip</name>
                  <description>CRC calculation does not include address field. The CRC calculation will start at the first byte after the address.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CRCPOLY</name>
          <description>CRC polynomial</description>
          <addressOffset>0x538</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CRCPOLY</name>
              <description>CRC polynomial</description>
              <lsb>0</lsb>
              <msb>23</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>CRCINIT</name>
          <description>CRC initial value</description>
          <addressOffset>0x53C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CRCINIT</name>
              <description>CRC initial value</description>
              <lsb>0</lsb>
              <msb>23</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>UNUSED0</name>
          <description>Unspecified</description>
          <addressOffset>0x540</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>TIFS</name>
          <description>Inter Frame Spacing in us</description>
          <addressOffset>0x544</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TIFS</name>
              <description>Inter Frame Spacing in us</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>RSSISAMPLE</name>
          <description>RSSI sample</description>
          <addressOffset>0x548</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>RSSISAMPLE</name>
              <description>RSSI sample</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>STATE</name>
          <description>Current radio state</description>
          <addressOffset>0x550</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>STATE</name>
              <description>Current radio state</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>RADIO is in the Disabled state</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RxRu</name>
                  <description>RADIO is in the RXRU state</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RxIdle</name>
                  <description>RADIO is in the RXIDLE state</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Rx</name>
                  <description>RADIO is in the RX state</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>RxDisable</name>
                  <description>RADIO is in the RXDISABLED state</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TxRu</name>
                  <description>RADIO is in the TXRU state</description>
                  <value>9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TxIdle</name>
                  <description>RADIO is in the TXIDLE state</description>
                  <value>10</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Tx</name>
                  <description>RADIO is in the TX state</description>
                  <value>11</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>TxDisable</name>
                  <description>RADIO is in the TXDISABLED state</description>
                  <value>12</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DATAWHITEIV</name>
          <description>Data whitening initial value</description>
          <addressOffset>0x554</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000040</resetValue>
          <fields>
            <field>
              <name>DATAWHITEIV</name>
              <description>Data whitening initial value. Bit 6 is hard-wired to '1', writing '0' to it has no effect, and it will always be read back and used by the device as '1'.</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>BCC</name>
          <description>Bit counter compare</description>
          <addressOffset>0x560</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>BCC</name>
              <description>Bit counter compare</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>8</dim>
          <dimIncrement>4</dimIncrement>
          <name>DAB[%s]</name>
          <description>Description collection[0]:  Device address base segment 0</description>
          <addressOffset>0x600</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DAB</name>
              <description>Device address base segment 0</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>8</dim>
          <dimIncrement>4</dimIncrement>
          <name>DAP[%s]</name>
          <description>Description collection[0]:  Device address prefix 0</description>
          <addressOffset>0x620</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DAP</name>
              <description>Device address prefix 0</description>
              <lsb>0</lsb>
              <msb>15</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>DACNF</name>
          <description>Device address match configuration</description>
          <addressOffset>0x640</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENA0</name>
              <description>Enable or disable device address matching using device address 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA1</name>
              <description>Enable or disable device address matching using device address 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA2</name>
              <description>Enable or disable device address matching using device address 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA3</name>
              <description>Enable or disable device address matching using device address 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA4</name>
              <description>Enable or disable device address matching using device address 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA5</name>
              <description>Enable or disable device address matching using device address 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA6</name>
              <description>Enable or disable device address matching using device address 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENA7</name>
              <description>Enable or disable device address matching using device address 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXADD0</name>
              <description>TxAdd for device address 0</description>
              <lsb>8</lsb>
              <msb>8</msb>
            </field>
            <field>
              <name>TXADD1</name>
              <description>TxAdd for device address 1</description>
              <lsb>9</lsb>
              <msb>9</msb>
            </field>
            <field>
              <name>TXADD2</name>
              <description>TxAdd for device address 2</description>
              <lsb>10</lsb>
              <msb>10</msb>
            </field>
            <field>
              <name>TXADD3</name>
              <description>TxAdd for device address 3</description>
              <lsb>11</lsb>
              <msb>11</msb>
            </field>
            <field>
              <name>TXADD4</name>
              <description>TxAdd for device address 4</description>
              <lsb>12</lsb>
              <msb>12</msb>
            </field>
            <field>
              <name>TXADD5</name>
              <description>TxAdd for device address 5</description>
              <lsb>13</lsb>
              <msb>13</msb>
            </field>
            <field>
              <name>TXADD6</name>
              <description>TxAdd for device address 6</description>
              <lsb>14</lsb>
              <msb>14</msb>
            </field>
            <field>
              <name>TXADD7</name>
              <description>TxAdd for device address 7</description>
              <lsb>15</lsb>
              <msb>15</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>MODECNF0</name>
          <description>Radio mode configuration register 0</description>
          <addressOffset>0x650</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000200</resetValue>
          <fields>
            <field>
              <name>RU</name>
              <description>Radio ramp-up time</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Default</name>
                  <description>Default ramp-up time (tRXEN), compatible with firmware written for nRF51</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Fast</name>
                  <description>Fast ramp-up (tRXEN,FAST), see electrical specification for more information</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DTX</name>
              <description>Default TX value</description>
              <lsb>8</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>B1</name>
                  <description>Transmit '1'</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>B0</name>
                  <description>Transmit '0'</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Center</name>
                  <description>Transmit center frequency</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>POWER</name>
          <description>Peripheral power control</description>
          <addressOffset>0xFFC</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>POWER</name>
              <description>Peripheral power control. The peripheral and its registers will be reset to its initial state by switching the peripheral off and then back on again.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Peripheral is powered off</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Peripheral is powered on</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>UARTE0</name>
      <description>UART with EasyDMA</description>
      <groupName>UARTE</groupName>
      <baseAddress>0x40002000</baseAddress>
      <size>32</size>
      <headerStructName>UARTE</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>UARTE0_UART0</name>
        <value>2</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_STARTRX</name>
          <description>Start UART receiver</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOPRX</name>
          <description>Stop UART receiver</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STARTTX</name>
          <description>Start UART transmitter</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOPTX</name>
          <description>Stop UART transmitter</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_FLUSHRX</name>
          <description>Flush RX FIFO into RX buffer</description>
          <addressOffset>0x02C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_CTS</name>
          <description>CTS is activated (set low). Clear To Send.</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_NCTS</name>
          <description>CTS is deactivated (set high). Not Clear To Send.</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RXDRDY</name>
          <description>Data received in RXD (but potentially not yet transferred to Data RAM)</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ENDRX</name>
          <description>Receive buffer is filled up</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_TXDRDY</name>
          <description>Data sent from TXD</description>
          <addressOffset>0x11C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ENDTX</name>
          <description>Last TX byte transmitted</description>
          <addressOffset>0x120</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ERROR</name>
          <description>Error detected</description>
          <addressOffset>0x124</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RXTO</name>
          <description>Receiver timeout</description>
          <addressOffset>0x144</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RXSTARTED</name>
          <description>UART receiver has started</description>
          <addressOffset>0x14C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_TXSTARTED</name>
          <description>UART transmitter has started</description>
          <addressOffset>0x150</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_TXSTOPPED</name>
          <description>Transmitter stopped</description>
          <addressOffset>0x158</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENDRX_STARTRX</name>
              <description>Shortcut between ENDRX event and STARTRX task</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX_STOPRX</name>
              <description>Shortcut between ENDRX event and STOPRX task</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CTS</name>
              <description>Enable or disable interrupt for CTS event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NCTS</name>
              <description>Enable or disable interrupt for NCTS event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXDRDY</name>
              <description>Enable or disable interrupt for RXDRDY event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Enable or disable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXDRDY</name>
              <description>Enable or disable interrupt for TXDRDY event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Enable or disable interrupt for ENDTX event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Enable or disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXTO</name>
              <description>Enable or disable interrupt for RXTO event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Enable or disable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Enable or disable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTOPPED</name>
              <description>Enable or disable interrupt for TXSTOPPED event</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CTS</name>
              <description>Write '1' to Enable interrupt for CTS event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NCTS</name>
              <description>Write '1' to Enable interrupt for NCTS event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXDRDY</name>
              <description>Write '1' to Enable interrupt for RXDRDY event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to Enable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXDRDY</name>
              <description>Write '1' to Enable interrupt for TXDRDY event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Write '1' to Enable interrupt for ENDTX event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Enable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXTO</name>
              <description>Write '1' to Enable interrupt for RXTO event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Write '1' to Enable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Write '1' to Enable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTOPPED</name>
              <description>Write '1' to Enable interrupt for TXSTOPPED event</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CTS</name>
              <description>Write '1' to Disable interrupt for CTS event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NCTS</name>
              <description>Write '1' to Disable interrupt for NCTS event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXDRDY</name>
              <description>Write '1' to Disable interrupt for RXDRDY event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to Disable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXDRDY</name>
              <description>Write '1' to Disable interrupt for TXDRDY event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Write '1' to Disable interrupt for ENDTX event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXTO</name>
              <description>Write '1' to Disable interrupt for RXTO event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Write '1' to Disable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Write '1' to Disable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTOPPED</name>
              <description>Write '1' to Disable interrupt for TXSTOPPED event</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERRORSRC</name>
          <description>Error source</description>
          <addressOffset>0x480</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>OVERRUN</name>
              <description>Overrun error</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARITY</name>
              <description>Parity error</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FRAMING</name>
              <description>Framing error occurred</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BREAK</name>
              <description>Break condition</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable UART</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable UARTE</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable UARTE</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable UARTE</description>
                  <value>8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>UARTE_PSEL</headerStructName>
          <addressOffset>0x508</addressOffset>
          <register>
            <name>RTS</name>
            <description>Pin select for RTS signal</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>TXD</name>
            <description>Pin select for TXD signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>CTS</name>
            <description>Pin select for CTS signal</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>RXD</name>
            <description>Pin select for RXD signal</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>BAUDRATE</name>
          <description>Baud rate. Accuracy depends on the HFCLK source selected.</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <resetValue>0x04000000</resetValue>
          <fields>
            <field>
              <name>BAUDRATE</name>
              <description>Baud rate</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Baud1200</name>
                  <description>1200 baud (actual rate: 1205)</description>
                  <value>0x0004F000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud2400</name>
                  <description>2400 baud (actual rate: 2396)</description>
                  <value>0x0009D000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud4800</name>
                  <description>4800 baud (actual rate: 4808)</description>
                  <value>0x0013B000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud9600</name>
                  <description>9600 baud (actual rate: 9598)</description>
                  <value>0x00275000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud14400</name>
                  <description>14400 baud (actual rate: 14401)</description>
                  <value>0x003AF000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud19200</name>
                  <description>19200 baud (actual rate: 19208)</description>
                  <value>0x004EA000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud28800</name>
                  <description>28800 baud (actual rate: 28777)</description>
                  <value>0x0075C000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud31250</name>
                  <description>31250 baud</description>
                  <value>0x00800000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud38400</name>
                  <description>38400 baud (actual rate: 38369)</description>
                  <value>0x009D0000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud56000</name>
                  <description>56000 baud (actual rate: 55944)</description>
                  <value>0x00E50000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud57600</name>
                  <description>57600 baud (actual rate: 57554)</description>
                  <value>0x00EB0000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud76800</name>
                  <description>76800 baud (actual rate: 76923)</description>
                  <value>0x013A9000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud115200</name>
                  <description>115200 baud (actual rate: 115108)</description>
                  <value>0x01D60000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud230400</name>
                  <description>230400 baud (actual rate: 231884)</description>
                  <value>0x03B00000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud250000</name>
                  <description>250000 baud</description>
                  <value>0x04000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud460800</name>
                  <description>460800 baud (actual rate: 457143)</description>
                  <value>0x07400000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud921600</name>
                  <description>921600 baud (actual rate: 941176)</description>
                  <value>0x0F000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud1M</name>
                  <description>1Mega baud</description>
                  <value>0x10000000</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>RXD</name>
          <description>RXD EasyDMA channel</description>
          <headerStructName>UARTE_RXD</headerStructName>
          <addressOffset>0x534</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in receive buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in receive buffer</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last transaction</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>TXD</name>
          <description>TXD EasyDMA channel</description>
          <headerStructName>UARTE_TXD</headerStructName>
          <addressOffset>0x544</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in transmit buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in transmit buffer</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last transaction</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>CONFIG</name>
          <description>Configuration of parity and hardware flow control</description>
          <addressOffset>0x56C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>HWFC</name>
              <description>Hardware flow control</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARITY</name>
              <description>Parity</description>
              <lsb>1</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude parity bit</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include parity bit</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>UART0</name>
      <description>Universal Asynchronous Receiver/Transmitter</description>
      <groupName>UART</groupName>
      <baseAddress>0x40002000</baseAddress>
      <size>32</size>
      <alternatePeripheral>UARTE0</alternatePeripheral>
      <headerStructName>UART</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>UARTE0_UART0</name>
        <value>2</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_STARTRX</name>
          <description>Start UART receiver</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOPRX</name>
          <description>Stop UART receiver</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STARTTX</name>
          <description>Start UART transmitter</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOPTX</name>
          <description>Stop UART transmitter</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_SUSPEND</name>
          <description>Suspend UART</description>
          <addressOffset>0x01C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_CTS</name>
          <description>CTS is activated (set low). Clear To Send.</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_NCTS</name>
          <description>CTS is deactivated (set high). Not Clear To Send.</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RXDRDY</name>
          <description>Data received in RXD</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_TXDRDY</name>
          <description>Data sent from TXD</description>
          <addressOffset>0x11C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ERROR</name>
          <description>Error detected</description>
          <addressOffset>0x124</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RXTO</name>
          <description>Receiver timeout</description>
          <addressOffset>0x144</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CTS_STARTRX</name>
              <description>Shortcut between CTS event and STARTRX task</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NCTS_STOPRX</name>
              <description>Shortcut between NCTS event and STOPRX task</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CTS</name>
              <description>Write '1' to Enable interrupt for CTS event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NCTS</name>
              <description>Write '1' to Enable interrupt for NCTS event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXDRDY</name>
              <description>Write '1' to Enable interrupt for RXDRDY event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXDRDY</name>
              <description>Write '1' to Enable interrupt for TXDRDY event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Enable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXTO</name>
              <description>Write '1' to Enable interrupt for RXTO event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CTS</name>
              <description>Write '1' to Disable interrupt for CTS event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NCTS</name>
              <description>Write '1' to Disable interrupt for NCTS event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXDRDY</name>
              <description>Write '1' to Disable interrupt for RXDRDY event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXDRDY</name>
              <description>Write '1' to Disable interrupt for TXDRDY event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXTO</name>
              <description>Write '1' to Disable interrupt for RXTO event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERRORSRC</name>
          <description>Error source</description>
          <addressOffset>0x480</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>OVERRUN</name>
              <description>Overrun error</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARITY</name>
              <description>Parity error</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FRAMING</name>
              <description>Framing error occurred</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BREAK</name>
              <description>Break condition</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable UART</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable UART</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable UART</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable UART</description>
                  <value>4</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PSELRTS</name>
          <description>Pin select for RTS</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>PSELRTS</name>
              <description>Pin number configuration for UART RTS signal</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disconnected</name>
                  <description>Disconnect</description>
                  <value>0xFFFFFFFF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PSELTXD</name>
          <description>Pin select for TXD</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>PSELTXD</name>
              <description>Pin number configuration for UART TXD signal</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disconnected</name>
                  <description>Disconnect</description>
                  <value>0xFFFFFFFF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PSELCTS</name>
          <description>Pin select for CTS</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>PSELCTS</name>
              <description>Pin number configuration for UART CTS signal</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disconnected</name>
                  <description>Disconnect</description>
                  <value>0xFFFFFFFF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PSELRXD</name>
          <description>Pin select for RXD</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>PSELRXD</name>
              <description>Pin number configuration for UART RXD signal</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disconnected</name>
                  <description>Disconnect</description>
                  <value>0xFFFFFFFF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RXD</name>
          <description>RXD register</description>
          <addressOffset>0x518</addressOffset>
          <access>read-only</access>
          <readAction>modifyExternal</readAction>
          <fields>
            <field>
              <name>RXD</name>
              <description>RX data received in previous transfers, double buffered</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TXD</name>
          <description>TXD register</description>
          <addressOffset>0x51C</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>TXD</name>
              <description>TX data to be transferred</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>BAUDRATE</name>
          <description>Baud rate</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <resetValue>0x04000000</resetValue>
          <fields>
            <field>
              <name>BAUDRATE</name>
              <description>Baud rate</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Baud1200</name>
                  <description>1200 baud (actual rate: 1205)</description>
                  <value>0x0004F000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud2400</name>
                  <description>2400 baud (actual rate: 2396)</description>
                  <value>0x0009D000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud4800</name>
                  <description>4800 baud (actual rate: 4808)</description>
                  <value>0x0013B000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud9600</name>
                  <description>9600 baud (actual rate: 9598)</description>
                  <value>0x00275000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud14400</name>
                  <description>14400 baud (actual rate: 14414)</description>
                  <value>0x003B0000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud19200</name>
                  <description>19200 baud (actual rate: 19208)</description>
                  <value>0x004EA000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud28800</name>
                  <description>28800 baud (actual rate: 28829)</description>
                  <value>0x0075F000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud31250</name>
                  <description>31250 baud</description>
                  <value>0x00800000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud38400</name>
                  <description>38400 baud (actual rate: 38462)</description>
                  <value>0x009D5000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud56000</name>
                  <description>56000 baud (actual rate: 55944)</description>
                  <value>0x00E50000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud57600</name>
                  <description>57600 baud (actual rate: 57762)</description>
                  <value>0x00EBF000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud76800</name>
                  <description>76800 baud (actual rate: 76923)</description>
                  <value>0x013A9000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud115200</name>
                  <description>115200 baud (actual rate: 115942)</description>
                  <value>0x01D7E000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud230400</name>
                  <description>230400 baud (actual rate: 231884)</description>
                  <value>0x03AFB000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud250000</name>
                  <description>250000 baud</description>
                  <value>0x04000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud460800</name>
                  <description>460800 baud (actual rate: 470588)</description>
                  <value>0x075F7000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud921600</name>
                  <description>921600 baud (actual rate: 941176)</description>
                  <value>0x0EBED000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Baud1M</name>
                  <description>1Mega baud</description>
                  <value>0x10000000</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG</name>
          <description>Configuration of parity and hardware flow control</description>
          <addressOffset>0x56C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>HWFC</name>
              <description>Hardware flow control</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PARITY</name>
              <description>Parity</description>
              <lsb>1</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude parity bit</description>
                  <value>0x0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include parity bit</description>
                  <value>0x7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SPIM0</name>
      <description>Serial Peripheral Interface Master with EasyDMA 0</description>
      <groupName>SPIM</groupName>
      <baseAddress>0x40003000</baseAddress>
      <size>32</size>
      <headerStructName>SPIM</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0</name>
        <value>3</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start SPI transaction</description>
          <addressOffset>0x010</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop SPI transaction</description>
          <addressOffset>0x014</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_SUSPEND</name>
          <description>Suspend SPI transaction</description>
          <addressOffset>0x01C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_RESUME</name>
          <description>Resume SPI transaction</description>
          <addressOffset>0x020</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>SPI transaction has stopped</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ENDRX</name>
          <description>End of RXD buffer reached</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_END</name>
          <description>End of RXD buffer and TXD buffer reached</description>
          <addressOffset>0x118</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ENDTX</name>
          <description>End of TXD buffer reached</description>
          <addressOffset>0x120</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_STARTED</name>
          <description>Transaction started</description>
          <addressOffset>0x14C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>END_START</name>
              <description>Shortcut between END event and START task</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Enable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to Enable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to Enable interrupt for END event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Write '1' to Enable interrupt for ENDTX event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STARTED</name>
              <description>Write '1' to Enable interrupt for STARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to Disable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to Disable interrupt for END event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Write '1' to Disable interrupt for ENDTX event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STARTED</name>
              <description>Write '1' to Disable interrupt for STARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable SPIM</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable SPIM</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable SPIM</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable SPIM</description>
                  <value>7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>SPIM_PSEL</headerStructName>
          <addressOffset>0x508</addressOffset>
          <register>
            <name>SCK</name>
            <description>Pin select for SCK</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>MOSI</name>
            <description>Pin select for MOSI signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>MISO</name>
            <description>Pin select for MISO signal</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>FREQUENCY</name>
          <description>SPI frequency. Accuracy depends on the HFCLK source selected.</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <resetValue>0x04000000</resetValue>
          <fields>
            <field>
              <name>FREQUENCY</name>
              <description>SPI master data rate</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>K125</name>
                  <description>125 kbps</description>
                  <value>0x02000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>K250</name>
                  <description>250 kbps</description>
                  <value>0x04000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>K500</name>
                  <description>500 kbps</description>
                  <value>0x08000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>M1</name>
                  <description>1 Mbps</description>
                  <value>0x10000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>M2</name>
                  <description>2 Mbps</description>
                  <value>0x20000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>M4</name>
                  <description>4 Mbps</description>
                  <value>0x40000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>M8</name>
                  <description>8 Mbps</description>
                  <value>0x80000000</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>RXD</name>
          <description>RXD EasyDMA channel</description>
          <headerStructName>SPIM_RXD</headerStructName>
          <addressOffset>0x534</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in receive buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in receive buffer</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last transaction</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>LIST</name>
            <description>EasyDMA list type</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>LIST</name>
                <description>List type</description>
                <lsb>0</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Disable EasyDMA list</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>ArrayList</name>
                    <description>Use array list</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>TXD</name>
          <description>TXD EasyDMA channel</description>
          <headerStructName>SPIM_TXD</headerStructName>
          <addressOffset>0x544</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in transmit buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in transmit buffer</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last transaction</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>LIST</name>
            <description>EasyDMA list type</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>LIST</name>
                <description>List type</description>
                <lsb>0</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Disable EasyDMA list</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>ArrayList</name>
                    <description>Use array list</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>CONFIG</name>
          <description>Configuration register</description>
          <addressOffset>0x554</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ORDER</name>
              <description>Bit order</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MsbFirst</name>
                  <description>Most significant bit shifted out first</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LsbFirst</name>
                  <description>Least significant bit shifted out first</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPHA</name>
              <description>Serial clock (SCK) phase</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Leading</name>
                  <description>Sample on leading edge of clock, shift serial data on trailing edge</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Trailing</name>
                  <description>Sample on trailing edge of clock, shift serial data on leading edge</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPOL</name>
              <description>Serial clock (SCK) polarity</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ActiveHigh</name>
                  <description>Active high</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ActiveLow</name>
                  <description>Active low</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ORC</name>
          <description>Over-read character. Character clocked out in case and over-read of the TXD buffer.</description>
          <addressOffset>0x5C0</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ORC</name>
              <description>Over-read character. Character clocked out in case and over-read of the TXD buffer.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SPIS0</name>
      <description>SPI Slave 0</description>
      <groupName>SPIS</groupName>
      <baseAddress>0x40003000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SPIM0</alternatePeripheral>
      <headerStructName>SPIS</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0</name>
        <value>3</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_ACQUIRE</name>
          <description>Acquire SPI semaphore</description>
          <addressOffset>0x024</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_RELEASE</name>
          <description>Release SPI semaphore, enabling the SPI slave to acquire it</description>
          <addressOffset>0x028</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_END</name>
          <description>Granted transaction completed</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ENDRX</name>
          <description>End of RXD buffer reached</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ACQUIRED</name>
          <description>Semaphore acquired</description>
          <addressOffset>0x128</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>END_ACQUIRE</name>
              <description>Shortcut between END event and ACQUIRE task</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>END</name>
              <description>Write '1' to Enable interrupt for END event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to Enable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACQUIRED</name>
              <description>Write '1' to Enable interrupt for ACQUIRED event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>END</name>
              <description>Write '1' to Disable interrupt for END event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to Disable interrupt for ENDRX event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACQUIRED</name>
              <description>Write '1' to Disable interrupt for ACQUIRED event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SEMSTAT</name>
          <description>Semaphore status register</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>SEMSTAT</name>
              <description>Semaphore status</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Free</name>
                  <description>Semaphore is free</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CPU</name>
                  <description>Semaphore is assigned to CPU</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SPIS</name>
                  <description>Semaphore is assigned to SPI slave</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CPUPending</name>
                  <description>Semaphore is assigned to SPI but a handover to the CPU is pending</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>STATUS</name>
          <description>Status from last transaction</description>
          <addressOffset>0x440</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>OVERREAD</name>
              <description>TX buffer over-read detected, and prevented</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: clear error on writing '1'</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVERFLOW</name>
              <description>RX buffer overflow detected, and prevented</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: clear error on writing '1'</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable SPI slave</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable SPI slave</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable SPI slave</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable SPI slave</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>SPIS_PSEL</headerStructName>
          <addressOffset>0x508</addressOffset>
          <register>
            <name>SCK</name>
            <description>Pin select for SCK</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>MISO</name>
            <description>Pin select for MISO signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>MOSI</name>
            <description>Pin select for MOSI signal</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>CSN</name>
            <description>Pin select for CSN signal</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>RXD</name>
          <description>Unspecified</description>
          <headerStructName>SPIS_RXD</headerStructName>
          <addressOffset>0x534</addressOffset>
          <register>
            <name>PTR</name>
            <description>RXD data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>RXD data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in receive buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in receive buffer</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes received in last granted transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes received in the last granted transaction</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>TXD</name>
          <description>Unspecified</description>
          <headerStructName>SPIS_TXD</headerStructName>
          <addressOffset>0x544</addressOffset>
          <register>
            <name>PTR</name>
            <description>TXD data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>TXD data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in transmit buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in transmit buffer</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transmitted in last granted transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transmitted in last granted transaction</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>CONFIG</name>
          <description>Configuration register</description>
          <addressOffset>0x554</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ORDER</name>
              <description>Bit order</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MsbFirst</name>
                  <description>Most significant bit shifted out first</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LsbFirst</name>
                  <description>Least significant bit shifted out first</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPHA</name>
              <description>Serial clock (SCK) phase</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Leading</name>
                  <description>Sample on leading edge of clock, shift serial data on trailing edge</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Trailing</name>
                  <description>Sample on trailing edge of clock, shift serial data on leading edge</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPOL</name>
              <description>Serial clock (SCK) polarity</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ActiveHigh</name>
                  <description>Active high</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ActiveLow</name>
                  <description>Active low</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DEF</name>
          <description>Default character. Character clocked out in case of an ignored transaction.</description>
          <addressOffset>0x55C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DEF</name>
              <description>Default character. Character clocked out in case of an ignored transaction.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ORC</name>
          <description>Over-read character</description>
          <addressOffset>0x5C0</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ORC</name>
              <description>Over-read character. Character clocked out after an over-read of the transmit buffer.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TWIM0</name>
      <description>I2C compatible Two-Wire Master Interface with EasyDMA 0</description>
      <groupName>TWIM</groupName>
      <baseAddress>0x40003000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SPIM0</alternatePeripheral>
      <headerStructName>TWIM</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0</name>
        <value>3</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_STARTRX</name>
          <description>Start TWI receive sequence</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STARTTX</name>
          <description>Start TWI transmit sequence</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop TWI transaction. Must be issued while the TWI master is not suspended.</description>
          <addressOffset>0x014</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_SUSPEND</name>
          <description>Suspend TWI transaction</description>
          <addressOffset>0x01C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_RESUME</name>
          <description>Resume TWI transaction</description>
          <addressOffset>0x020</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>TWI stopped</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ERROR</name>
          <description>TWI error</description>
          <addressOffset>0x124</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_SUSPENDED</name>
          <description>Last byte has been sent out after the SUSPEND task has been issued, TWI traffic is now suspended.</description>
          <addressOffset>0x148</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RXSTARTED</name>
          <description>Receive sequence started</description>
          <addressOffset>0x14C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_TXSTARTED</name>
          <description>Transmit sequence started</description>
          <addressOffset>0x150</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_LASTRX</name>
          <description>Byte boundary, starting to receive the last byte</description>
          <addressOffset>0x15C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_LASTTX</name>
          <description>Byte boundary, starting to transmit the last byte</description>
          <addressOffset>0x160</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>LASTTX_STARTRX</name>
              <description>Shortcut between LASTTX event and STARTRX task</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTTX_SUSPEND</name>
              <description>Shortcut between LASTTX event and SUSPEND task</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTTX_STOP</name>
              <description>Shortcut between LASTTX event and STOP task</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTRX_STARTTX</name>
              <description>Shortcut between LASTRX event and STARTTX task</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTRX_STOP</name>
              <description>Shortcut between LASTRX event and STOP task</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Enable or disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Enable or disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SUSPENDED</name>
              <description>Enable or disable interrupt for SUSPENDED event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Enable or disable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Enable or disable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTRX</name>
              <description>Enable or disable interrupt for LASTRX event</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTTX</name>
              <description>Enable or disable interrupt for LASTTX event</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Enable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Enable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SUSPENDED</name>
              <description>Write '1' to Enable interrupt for SUSPENDED event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Write '1' to Enable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Write '1' to Enable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTRX</name>
              <description>Write '1' to Enable interrupt for LASTRX event</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTTX</name>
              <description>Write '1' to Enable interrupt for LASTTX event</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SUSPENDED</name>
              <description>Write '1' to Disable interrupt for SUSPENDED event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Write '1' to Disable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Write '1' to Disable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTRX</name>
              <description>Write '1' to Disable interrupt for LASTRX event</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LASTTX</name>
              <description>Write '1' to Disable interrupt for LASTTX event</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERRORSRC</name>
          <description>Error source</description>
          <addressOffset>0x4C4</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>OVERRUN</name>
              <description>Overrun error</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotReceived</name>
                  <description>Error did not occur</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Received</name>
                  <description>Error occurred</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ANACK</name>
              <description>NACK received after sending the address (write '1' to clear)</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotReceived</name>
                  <description>Error did not occur</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Received</name>
                  <description>Error occurred</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DNACK</name>
              <description>NACK received after sending a data byte (write '1' to clear)</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotReceived</name>
                  <description>Error did not occur</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Received</name>
                  <description>Error occurred</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable TWIM</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable TWIM</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable TWIM</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable TWIM</description>
                  <value>6</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>TWIM_PSEL</headerStructName>
          <addressOffset>0x508</addressOffset>
          <register>
            <name>SCL</name>
            <description>Pin select for SCL signal</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>SDA</name>
            <description>Pin select for SDA signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>FREQUENCY</name>
          <description>TWI frequency</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <resetValue>0x04000000</resetValue>
          <fields>
            <field>
              <name>FREQUENCY</name>
              <description>TWI master clock frequency</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>K100</name>
                  <description>100 kbps</description>
                  <value>0x01980000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>K250</name>
                  <description>250 kbps</description>
                  <value>0x04000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>K400</name>
                  <description>400 kbps</description>
                  <value>0x06400000</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>RXD</name>
          <description>RXD EasyDMA channel</description>
          <headerStructName>TWIM_RXD</headerStructName>
          <addressOffset>0x534</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in receive buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in receive buffer</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last transaction. In case of NACK error, includes the NACK'ed byte.</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>LIST</name>
            <description>EasyDMA list type</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>LIST</name>
                <description>List type</description>
                <lsb>0</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Disable EasyDMA list</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>ArrayList</name>
                    <description>Use array list</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>TXD</name>
          <description>TXD EasyDMA channel</description>
          <headerStructName>TWIM_TXD</headerStructName>
          <addressOffset>0x544</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in transmit buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in transmit buffer</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last transaction. In case of NACK error, includes the NACK'ed byte.</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>LIST</name>
            <description>EasyDMA list type</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>LIST</name>
                <description>List type</description>
                <lsb>0</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Disable EasyDMA list</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>ArrayList</name>
                    <description>Use array list</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>ADDRESS</name>
          <description>Address used in the TWI transfer</description>
          <addressOffset>0x588</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ADDRESS</name>
              <description>Address used in the TWI transfer</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TWIS0</name>
      <description>I2C compatible Two-Wire Slave Interface with EasyDMA 0</description>
      <groupName>TWIS</groupName>
      <baseAddress>0x40003000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SPIM0</alternatePeripheral>
      <headerStructName>TWIS</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0</name>
        <value>3</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop TWI transaction</description>
          <addressOffset>0x014</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_SUSPEND</name>
          <description>Suspend TWI transaction</description>
          <addressOffset>0x01C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_RESUME</name>
          <description>Resume TWI transaction</description>
          <addressOffset>0x020</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_PREPARERX</name>
          <description>Prepare the TWI slave to respond to a write command</description>
          <addressOffset>0x030</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_PREPARETX</name>
          <description>Prepare the TWI slave to respond to a read command</description>
          <addressOffset>0x034</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>TWI stopped</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ERROR</name>
          <description>TWI error</description>
          <addressOffset>0x124</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RXSTARTED</name>
          <description>Receive sequence started</description>
          <addressOffset>0x14C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_TXSTARTED</name>
          <description>Transmit sequence started</description>
          <addressOffset>0x150</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_WRITE</name>
          <description>Write command received</description>
          <addressOffset>0x164</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_READ</name>
          <description>Read command received</description>
          <addressOffset>0x168</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>WRITE_SUSPEND</name>
              <description>Shortcut between WRITE event and SUSPEND task</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>READ_SUSPEND</name>
              <description>Shortcut between READ event and SUSPEND task</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Enable or disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Enable or disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Enable or disable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Enable or disable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE</name>
              <description>Enable or disable interrupt for WRITE event</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>READ</name>
              <description>Enable or disable interrupt for READ event</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Enable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Enable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Write '1' to Enable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Write '1' to Enable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE</name>
              <description>Write '1' to Enable interrupt for WRITE event</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>READ</name>
              <description>Write '1' to Enable interrupt for READ event</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXSTARTED</name>
              <description>Write '1' to Disable interrupt for RXSTARTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXSTARTED</name>
              <description>Write '1' to Disable interrupt for TXSTARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>WRITE</name>
              <description>Write '1' to Disable interrupt for WRITE event</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>READ</name>
              <description>Write '1' to Disable interrupt for READ event</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERRORSRC</name>
          <description>Error source</description>
          <addressOffset>0x4D0</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>OVERFLOW</name>
              <description>RX buffer overflow detected, and prevented</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Error did not occur</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Error occurred</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DNACK</name>
              <description>NACK sent after receiving a data byte</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotReceived</name>
                  <description>Error did not occur</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Received</name>
                  <description>Error occurred</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVERREAD</name>
              <description>TX buffer over-read detected, and prevented</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotDetected</name>
                  <description>Error did not occur</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Detected</name>
                  <description>Error occurred</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MATCH</name>
          <description>Status register indicating which address had a match</description>
          <addressOffset>0x4D4</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>MATCH</name>
              <description>Which of the addresses in {ADDRESS} matched the incoming address</description>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable TWIS</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable TWIS</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable TWIS</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable TWIS</description>
                  <value>9</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>TWIS_PSEL</headerStructName>
          <addressOffset>0x508</addressOffset>
          <register>
            <name>SCL</name>
            <description>Pin select for SCL signal</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>SDA</name>
            <description>Pin select for SDA signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>RXD</name>
          <description>RXD EasyDMA channel</description>
          <headerStructName>TWIS_RXD</headerStructName>
          <addressOffset>0x534</addressOffset>
          <register>
            <name>PTR</name>
            <description>RXD Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>RXD Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in RXD buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in RXD buffer</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last RXD transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last RXD transaction</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>TXD</name>
          <description>TXD EasyDMA channel</description>
          <headerStructName>TWIS_TXD</headerStructName>
          <addressOffset>0x544</addressOffset>
          <register>
            <name>PTR</name>
            <description>TXD Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>TXD Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of bytes in TXD buffer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of bytes in TXD buffer</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of bytes transferred in the last TXD transaction</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of bytes transferred in the last TXD transaction</description>
                <lsb>0</lsb>
                <msb>7</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <name>ADDRESS[%s]</name>
          <description>Description collection[0]:  TWI slave address 0</description>
          <addressOffset>0x588</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ADDRESS</name>
              <description>TWI slave address</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG</name>
          <description>Configuration register for the address match mechanism</description>
          <addressOffset>0x594</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>ADDRESS0</name>
              <description>Enable or disable address matching on ADDRESS[0]</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ADDRESS1</name>
              <description>Enable or disable address matching on ADDRESS[1]</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ORC</name>
          <description>Over-read character. Character sent out in case of an over-read of the transmit buffer.</description>
          <addressOffset>0x5C0</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ORC</name>
              <description>Over-read character. Character sent out in case of an over-read of the transmit buffer.</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SPI0</name>
      <description>Serial Peripheral Interface 0</description>
      <groupName>SPI</groupName>
      <baseAddress>0x40003000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SPIM0</alternatePeripheral>
      <headerStructName>SPI</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0</name>
        <value>3</value>
      </interrupt>
      <registers>
        <register>
          <name>EVENTS_READY</name>
          <description>TXD byte sent and RXD byte received</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to Enable interrupt for READY event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to Disable interrupt for READY event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable SPI</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable SPI</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable SPI</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable SPI</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>SPI_PSEL</headerStructName>
          <addressOffset>0x508</addressOffset>
          <register>
            <name>SCK</name>
            <description>Pin select for SCK</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PSELSCK</name>
                <description>Pin number configuration for SPI SCK signal</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>0xFFFFFFFF</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>MOSI</name>
            <description>Pin select for MOSI</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PSELMOSI</name>
                <description>Pin number configuration for SPI MOSI signal</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>0xFFFFFFFF</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>MISO</name>
            <description>Pin select for MISO</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PSELMISO</name>
                <description>Pin number configuration for SPI MISO signal</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>0xFFFFFFFF</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>RXD</name>
          <description>RXD register</description>
          <addressOffset>0x518</addressOffset>
          <access>read-only</access>
          <readAction>modifyExternal</readAction>
          <fields>
            <field>
              <name>RXD</name>
              <description>RX data received. Double buffered</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TXD</name>
          <description>TXD register</description>
          <addressOffset>0x51C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TXD</name>
              <description>TX data to send. Double buffered</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>FREQUENCY</name>
          <description>SPI frequency</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <resetValue>0x04000000</resetValue>
          <fields>
            <field>
              <name>FREQUENCY</name>
              <description>SPI master data rate</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>K125</name>
                  <description>125 kbps</description>
                  <value>0x02000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>K250</name>
                  <description>250 kbps</description>
                  <value>0x04000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>K500</name>
                  <description>500 kbps</description>
                  <value>0x08000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>M1</name>
                  <description>1 Mbps</description>
                  <value>0x10000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>M2</name>
                  <description>2 Mbps</description>
                  <value>0x20000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>M4</name>
                  <description>4 Mbps</description>
                  <value>0x40000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>M8</name>
                  <description>8 Mbps</description>
                  <value>0x80000000</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG</name>
          <description>Configuration register</description>
          <addressOffset>0x554</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ORDER</name>
              <description>Bit order</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MsbFirst</name>
                  <description>Most significant bit shifted out first</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LsbFirst</name>
                  <description>Least significant bit shifted out first</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPHA</name>
              <description>Serial clock (SCK) phase</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Leading</name>
                  <description>Sample on leading edge of clock, shift serial data on trailing edge</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Trailing</name>
                  <description>Sample on trailing edge of clock, shift serial data on leading edge</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CPOL</name>
              <description>Serial clock (SCK) polarity</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ActiveHigh</name>
                  <description>Active high</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ActiveLow</name>
                  <description>Active low</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TWI0</name>
      <description>I2C compatible Two-Wire Interface 0</description>
      <groupName>TWI</groupName>
      <baseAddress>0x40003000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SPIM0</alternatePeripheral>
      <headerStructName>TWI</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0</name>
        <value>3</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_STARTRX</name>
          <description>Start TWI receive sequence</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STARTTX</name>
          <description>Start TWI transmit sequence</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop TWI transaction</description>
          <addressOffset>0x014</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_SUSPEND</name>
          <description>Suspend TWI transaction</description>
          <addressOffset>0x01C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_RESUME</name>
          <description>Resume TWI transaction</description>
          <addressOffset>0x020</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>TWI stopped</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RXDREADY</name>
          <description>TWI RXD byte received</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_TXDSENT</name>
          <description>TWI TXD byte sent</description>
          <addressOffset>0x11C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ERROR</name>
          <description>TWI error</description>
          <addressOffset>0x124</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_BB</name>
          <description>TWI byte boundary, generated before each byte that is sent or received</description>
          <addressOffset>0x138</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_SUSPENDED</name>
          <description>TWI entered the suspended state</description>
          <addressOffset>0x148</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>BB_SUSPEND</name>
              <description>Shortcut between BB event and SUSPEND task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BB_STOP</name>
              <description>Shortcut between BB event and STOP task</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Enable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXDREADY</name>
              <description>Write '1' to Enable interrupt for RXDREADY event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXDSENT</name>
              <description>Write '1' to Enable interrupt for TXDSENT event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Enable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BB</name>
              <description>Write '1' to Enable interrupt for BB event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SUSPENDED</name>
              <description>Write '1' to Enable interrupt for SUSPENDED event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXDREADY</name>
              <description>Write '1' to Disable interrupt for RXDREADY event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXDSENT</name>
              <description>Write '1' to Disable interrupt for TXDSENT event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Disable interrupt for ERROR event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>BB</name>
              <description>Write '1' to Disable interrupt for BB event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SUSPENDED</name>
              <description>Write '1' to Disable interrupt for SUSPENDED event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERRORSRC</name>
          <description>Error source</description>
          <addressOffset>0x4C4</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>OVERRUN</name>
              <description>Overrun error</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: no overrun occured</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: overrun occured</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: clear error on writing '1'</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ANACK</name>
              <description>NACK received after sending the address (write '1' to clear)</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: clear error on writing '1'</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DNACK</name>
              <description>NACK received after sending a data byte (write '1' to clear)</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>NotPresent</name>
                  <description>Read: error not present</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Present</name>
                  <description>Read: error present</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: clear error on writing '1'</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable TWI</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable TWI</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable TWI</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable TWI</description>
                  <value>5</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PSELSCL</name>
          <description>Pin select for SCL</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>PSELSCL</name>
              <description>Pin number configuration for TWI SCL signal</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disconnected</name>
                  <description>Disconnect</description>
                  <value>0xFFFFFFFF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PSELSDA</name>
          <description>Pin select for SDA</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>PSELSDA</name>
              <description>Pin number configuration for TWI SDA signal</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disconnected</name>
                  <description>Disconnect</description>
                  <value>0xFFFFFFFF</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RXD</name>
          <description>RXD register</description>
          <addressOffset>0x518</addressOffset>
          <access>read-only</access>
          <readAction>modifyExternal</readAction>
          <fields>
            <field>
              <name>RXD</name>
              <description>RXD register</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>TXD</name>
          <description>TXD register</description>
          <addressOffset>0x51C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TXD</name>
              <description>TXD register</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>FREQUENCY</name>
          <description>TWI frequency</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <resetValue>0x04000000</resetValue>
          <fields>
            <field>
              <name>FREQUENCY</name>
              <description>TWI master clock frequency</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>K100</name>
                  <description>100 kbps</description>
                  <value>0x01980000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>K250</name>
                  <description>250 kbps</description>
                  <value>0x04000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>K400</name>
                  <description>400 kbps (actual rate 410.256 kbps)</description>
                  <value>0x06680000</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ADDRESS</name>
          <description>Address used in the TWI transfer</description>
          <addressOffset>0x588</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ADDRESS</name>
              <description>Address used in the TWI transfer</description>
              <lsb>0</lsb>
              <msb>6</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="SPIM0">
      <name>SPIM1</name>
      <description>Serial Peripheral Interface Master with EasyDMA 1</description>
      <groupName>SPIM</groupName>
      <baseAddress>0x40004000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1</name>
        <value>4</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SPIS0">
      <name>SPIS1</name>
      <description>SPI Slave 1</description>
      <groupName>SPIS</groupName>
      <baseAddress>0x40004000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SPIM1</alternatePeripheral>
      <interrupt>
        <name>SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1</name>
        <value>4</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="TWIM0">
      <name>TWIM1</name>
      <description>I2C compatible Two-Wire Master Interface with EasyDMA 1</description>
      <groupName>TWIM</groupName>
      <baseAddress>0x40004000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SPIM1</alternatePeripheral>
      <interrupt>
        <name>SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1</name>
        <value>4</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="TWIS0">
      <name>TWIS1</name>
      <description>I2C compatible Two-Wire Slave Interface with EasyDMA 1</description>
      <groupName>TWIS</groupName>
      <baseAddress>0x40004000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SPIM1</alternatePeripheral>
      <interrupt>
        <name>SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1</name>
        <value>4</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SPI0">
      <name>SPI1</name>
      <description>Serial Peripheral Interface 1</description>
      <groupName>SPI</groupName>
      <baseAddress>0x40004000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SPIM1</alternatePeripheral>
      <interrupt>
        <name>SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1</name>
        <value>4</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="TWI0">
      <name>TWI1</name>
      <description>I2C compatible Two-Wire Interface 1</description>
      <groupName>TWI</groupName>
      <baseAddress>0x40004000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SPIM1</alternatePeripheral>
      <interrupt>
        <name>SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1</name>
        <value>4</value>
      </interrupt>
    </peripheral>
    <peripheral>
      <name>NFCT</name>
      <description>NFC-A compatible radio</description>
      <groupName>NFCT</groupName>
      <baseAddress>0x40005000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>NFCT</name>
        <value>5</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_ACTIVATE</name>
          <description>Activate NFC peripheral for incoming and outgoing frames, change state to activated</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_DISABLE</name>
          <description>Disable NFC peripheral</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_SENSE</name>
          <description>Enable NFC sense field mode, change state to sense mode</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STARTTX</name>
          <description>Start transmission of a outgoing frame, change state to transmit</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_ENABLERXDATA</name>
          <description>Initializes the EasyDMA for receive.</description>
          <addressOffset>0x01C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_GOIDLE</name>
          <description>Force state machine to IDLE state</description>
          <addressOffset>0x024</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_GOSLEEP</name>
          <description>Force state machine to SLEEP_A state</description>
          <addressOffset>0x028</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_READY</name>
          <description>The NFC peripheral is ready to receive and send frames</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_FIELDDETECTED</name>
          <description>Remote NFC field detected</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_FIELDLOST</name>
          <description>Remote NFC field lost</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_TXFRAMESTART</name>
          <description>Marks the start of the first symbol of a transmitted frame</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_TXFRAMEEND</name>
          <description>Marks the end of the last transmitted on-air symbol of a frame</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RXFRAMESTART</name>
          <description>Marks the end of the first symbol of a received frame</description>
          <addressOffset>0x114</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RXFRAMEEND</name>
          <description>Received data have been checked (CRC, parity) and transferred to RAM, and EasyDMA has ended accessing the RX buffer</description>
          <addressOffset>0x118</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ERROR</name>
          <description>NFC error reported. The ERRORSTATUS register contains details on the source of the error.</description>
          <addressOffset>0x11C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RXERROR</name>
          <description>NFC RX frame error reported. The FRAMESTATUS.RX register contains details on the source of the error.</description>
          <addressOffset>0x128</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ENDRX</name>
          <description>RX buffer (as defined by PACKETPTR and MAXLEN) in Data RAM full.</description>
          <addressOffset>0x12C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ENDTX</name>
          <description>Transmission of data in RAM has ended, and EasyDMA has ended accessing the TX buffer</description>
          <addressOffset>0x130</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_AUTOCOLRESSTARTED</name>
          <description>Auto collision resolution process has started</description>
          <addressOffset>0x138</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_COLLISION</name>
          <description>NFC Auto collision resolution error reported.</description>
          <addressOffset>0x148</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_SELECTED</name>
          <description>NFC Auto collision resolution successfully completed</description>
          <addressOffset>0x14C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_STARTED</name>
          <description>EasyDMA is ready to receive or send frames.</description>
          <addressOffset>0x150</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>FIELDDETECTED_ACTIVATE</name>
              <description>Shortcut between FIELDDETECTED event and ACTIVATE task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FIELDLOST_SENSE</name>
              <description>Shortcut between FIELDLOST event and SENSE task</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Enable or disable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FIELDDETECTED</name>
              <description>Enable or disable interrupt for FIELDDETECTED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FIELDLOST</name>
              <description>Enable or disable interrupt for FIELDLOST event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXFRAMESTART</name>
              <description>Enable or disable interrupt for TXFRAMESTART event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXFRAMEEND</name>
              <description>Enable or disable interrupt for TXFRAMEEND event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXFRAMESTART</name>
              <description>Enable or disable interrupt for RXFRAMESTART event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXFRAMEEND</name>
              <description>Enable or disable interrupt for RXFRAMEEND event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Enable or disable interrupt for ERROR event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXERROR</name>
              <description>Enable or disable interrupt for RXERROR event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Enable or disable interrupt for ENDRX event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Enable or disable interrupt for ENDTX event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AUTOCOLRESSTARTED</name>
              <description>Enable or disable interrupt for AUTOCOLRESSTARTED event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COLLISION</name>
              <description>Enable or disable interrupt for COLLISION event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SELECTED</name>
              <description>Enable or disable interrupt for SELECTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STARTED</name>
              <description>Enable or disable interrupt for STARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to Enable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FIELDDETECTED</name>
              <description>Write '1' to Enable interrupt for FIELDDETECTED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FIELDLOST</name>
              <description>Write '1' to Enable interrupt for FIELDLOST event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXFRAMESTART</name>
              <description>Write '1' to Enable interrupt for TXFRAMESTART event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXFRAMEEND</name>
              <description>Write '1' to Enable interrupt for TXFRAMEEND event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXFRAMESTART</name>
              <description>Write '1' to Enable interrupt for RXFRAMESTART event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXFRAMEEND</name>
              <description>Write '1' to Enable interrupt for RXFRAMEEND event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Enable interrupt for ERROR event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXERROR</name>
              <description>Write '1' to Enable interrupt for RXERROR event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to Enable interrupt for ENDRX event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Write '1' to Enable interrupt for ENDTX event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AUTOCOLRESSTARTED</name>
              <description>Write '1' to Enable interrupt for AUTOCOLRESSTARTED event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COLLISION</name>
              <description>Write '1' to Enable interrupt for COLLISION event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SELECTED</name>
              <description>Write '1' to Enable interrupt for SELECTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STARTED</name>
              <description>Write '1' to Enable interrupt for STARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to Disable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FIELDDETECTED</name>
              <description>Write '1' to Disable interrupt for FIELDDETECTED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>FIELDLOST</name>
              <description>Write '1' to Disable interrupt for FIELDLOST event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXFRAMESTART</name>
              <description>Write '1' to Disable interrupt for TXFRAMESTART event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXFRAMEEND</name>
              <description>Write '1' to Disable interrupt for TXFRAMEEND event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXFRAMESTART</name>
              <description>Write '1' to Disable interrupt for RXFRAMESTART event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXFRAMEEND</name>
              <description>Write '1' to Disable interrupt for RXFRAMEEND event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Disable interrupt for ERROR event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RXERROR</name>
              <description>Write '1' to Disable interrupt for RXERROR event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDRX</name>
              <description>Write '1' to Disable interrupt for ENDRX event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDTX</name>
              <description>Write '1' to Disable interrupt for ENDTX event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>AUTOCOLRESSTARTED</name>
              <description>Write '1' to Disable interrupt for AUTOCOLRESSTARTED event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COLLISION</name>
              <description>Write '1' to Disable interrupt for COLLISION event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SELECTED</name>
              <description>Write '1' to Disable interrupt for SELECTED event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STARTED</name>
              <description>Write '1' to Disable interrupt for STARTED event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERRORSTATUS</name>
          <description>NFC Error Status register</description>
          <addressOffset>0x404</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>FRAMEDELAYTIMEOUT</name>
              <description>No STARTTX task triggered before expiration of the time set in FRAMEDELAYMAX</description>
              <lsb>0</lsb>
              <msb>0</msb>
            </field>
            <field>
              <name>NFCFIELDTOOSTRONG</name>
              <description>Field level is too high at max load resistance</description>
              <lsb>2</lsb>
              <msb>2</msb>
            </field>
            <field>
              <name>NFCFIELDTOOWEAK</name>
              <description>Field level is too low at min load resistance</description>
              <lsb>3</lsb>
              <msb>3</msb>
            </field>
          </fields>
        </register>
        <cluster>
          <name>FRAMESTATUS</name>
          <description>Unspecified</description>
          <addressOffset>0x40C</addressOffset>
          <register>
            <name>RX</name>
            <description>Result of last incoming frames</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <modifiedWriteValues>oneToClear</modifiedWriteValues>
            <fields>
              <field>
                <name>CRCERROR</name>
                <description>No valid End of Frame detected</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>CRCCorrect</name>
                    <description>Valid CRC detected</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>CRCError</name>
                    <description>CRC received does not match local check</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>PARITYSTATUS</name>
                <description>Parity status of received frame</description>
                <lsb>2</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>ParityOK</name>
                    <description>Frame received with parity OK</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>ParityError</name>
                    <description>Frame received with parity error</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>OVERRUN</name>
                <description>Overrun detected</description>
                <lsb>3</lsb>
                <msb>3</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoOverrun</name>
                    <description>No overrun detected</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Overrun</name>
                    <description>Overrun error</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>CURRENTLOADCTRL</name>
          <description>Current value driven to the NFC Load Control</description>
          <addressOffset>0x430</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CURRENTLOADCTRL</name>
              <description>Current value driven to the NFC Load Control</description>
              <lsb>0</lsb>
              <msb>5</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>FIELDPRESENT</name>
          <description>Indicates the presence or not of a valid field</description>
          <addressOffset>0x43C</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>FIELDPRESENT</name>
              <description>Indicates the presence or not of a valid field. Available only in the activated state.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NoField</name>
                  <description>No valid field detected</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>FieldPresent</name>
                  <description>Valid field detected</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOCKDETECT</name>
              <description>Indicates if the low level has locked to the field</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLocked</name>
                  <description>Not locked to field</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Locked</name>
                  <description>Locked to field</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>FRAMEDELAYMIN</name>
          <description>Minimum frame delay</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000480</resetValue>
          <fields>
            <field>
              <name>FRAMEDELAYMIN</name>
              <description>Minimum frame delay in number of 13.56 MHz clocks</description>
              <lsb>0</lsb>
              <msb>15</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>FRAMEDELAYMAX</name>
          <description>Maximum frame delay</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0x00001000</resetValue>
          <fields>
            <field>
              <name>FRAMEDELAYMAX</name>
              <description>Maximum frame delay in number of 13.56 MHz clocks</description>
              <lsb>0</lsb>
              <msb>15</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>FRAMEDELAYMODE</name>
          <description>Configuration register for the Frame Delay Timer</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>FRAMEDELAYMODE</name>
              <description>Configuration register for the Frame Delay Timer</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>FreeRun</name>
                  <description>Transmission is independent of frame timer and will start when the STARTTX task is triggered. No timeout.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Window</name>
                  <description>Frame is transmitted between FRAMEDELAYMIN and FRAMEDELAYMAX</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ExactVal</name>
                  <description>Frame is transmitted exactly at FRAMEDELAYMAX</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WindowGrid</name>
                  <description>Frame is transmitted on a bit grid between FRAMEDELAYMIN and FRAMEDELAYMAX</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PACKETPTR</name>
          <description>Packet pointer for TXD and RXD data storage in Data RAM</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PTR</name>
              <description>Packet pointer for TXD and RXD data storage in Data RAM. This address is a byte aligned RAM address.</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>MAXLEN</name>
          <description>Size of allocated for TXD and RXD data storage buffer in Data RAM</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>MAXLEN</name>
              <description>Size of allocated for TXD and RXD data storage buffer in Data RAM</description>
              <lsb>0</lsb>
              <msb>8</msb>
            </field>
          </fields>
        </register>
        <cluster>
          <name>TXD</name>
          <description>Unspecified</description>
          <addressOffset>0x518</addressOffset>
          <register>
            <name>FRAMECONFIG</name>
            <description>Configuration of outgoing frames</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000017</resetValue>
            <fields>
              <field>
                <name>PARITY</name>
                <description>Adding parity or not in the frame</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoParity</name>
                    <description>Parity is not added in TX frames</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Parity</name>
                    <description>Parity is added TX frames</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>DISCARDMODE</name>
                <description>Discarding unused bits in start or at end of a Frame</description>
                <lsb>1</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>DiscardEnd</name>
                    <description>Unused bits is discarded at end of frame</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>DiscardStart</name>
                    <description>Unused bits is discarded at start of frame</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SOF</name>
                <description>Adding SoF or not in TX frames</description>
                <lsb>2</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoSoF</name>
                    <description>Start of Frame symbol not added</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>SoF</name>
                    <description>Start of Frame symbol added</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>CRCMODETX</name>
                <description>CRC mode for outgoing frames</description>
                <lsb>4</lsb>
                <msb>4</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoCRCTX</name>
                    <description>CRC is not added to the frame</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>CRC16TX</name>
                    <description>16 bit CRC added to the frame based on all the data read from RAM that is used in the frame</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Size of outgoing frame</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>TXDATABITS</name>
                <description>Number of bits in the last or first byte read from RAM that shall be included in the frame (excluding parity bit).</description>
                <lsb>0</lsb>
                <msb>2</msb>
              </field>
              <field>
                <name>TXDATABYTES</name>
                <description>Number of complete bytes that shall be included in the frame, excluding CRC, parity and framing</description>
                <lsb>3</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>RXD</name>
          <description>Unspecified</description>
          <addressOffset>0x520</addressOffset>
          <register>
            <name>FRAMECONFIG</name>
            <description>Configuration of incoming frames</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000015</resetValue>
            <fields>
              <field>
                <name>PARITY</name>
                <description>Parity expected or not in RX frame</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoParity</name>
                    <description>Parity is not expected in RX frames</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Parity</name>
                    <description>Parity is expected in RX frames</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SOF</name>
                <description>SoF expected or not in RX frames</description>
                <lsb>2</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoSoF</name>
                    <description>Start of Frame symbol is not expected in RX frames</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>SoF</name>
                    <description>Start of Frame symbol is expected in RX frames</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>CRCMODERX</name>
                <description>CRC mode for incoming frames</description>
                <lsb>4</lsb>
                <msb>4</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoCRCRX</name>
                    <description>CRC is not expected in RX frames</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>CRC16RX</name>
                    <description>Last 16 bits in RX frame is CRC, CRC is checked and CRCSTATUS updated</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Size of last incoming frame</description>
            <addressOffset>0x004</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>RXDATABITS</name>
                <description>Number of bits in the last byte in the frame, if less than 8 (including CRC, but excluding parity and SoF/EoF framing).</description>
                <lsb>0</lsb>
                <msb>2</msb>
              </field>
              <field>
                <name>RXDATABYTES</name>
                <description>Number of complete bytes received in the frame (including CRC, but excluding parity and SoF/EoF framing)</description>
                <lsb>3</lsb>
                <msb>11</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>NFCID1_LAST</name>
          <description>Last NFCID1 part (4, 7 or 10 bytes ID)</description>
          <addressOffset>0x590</addressOffset>
          <access>read-write</access>
          <resetValue>0x00006363</resetValue>
          <fields>
            <field>
              <name>NFCID1_Z</name>
              <description>NFCID1 byte Z (very last byte sent)</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
            <field>
              <name>NFCID1_Y</name>
              <description>NFCID1 byte Y</description>
              <lsb>8</lsb>
              <msb>15</msb>
            </field>
            <field>
              <name>NFCID1_X</name>
              <description>NFCID1 byte X</description>
              <lsb>16</lsb>
              <msb>23</msb>
            </field>
            <field>
              <name>NFCID1_W</name>
              <description>NFCID1 byte W</description>
              <lsb>24</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>NFCID1_2ND_LAST</name>
          <description>Second last NFCID1 part (7 or 10 bytes ID)</description>
          <addressOffset>0x594</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>NFCID1_V</name>
              <description>NFCID1 byte V</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
            <field>
              <name>NFCID1_U</name>
              <description>NFCID1 byte U</description>
              <lsb>8</lsb>
              <msb>15</msb>
            </field>
            <field>
              <name>NFCID1_T</name>
              <description>NFCID1 byte T</description>
              <lsb>16</lsb>
              <msb>23</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>NFCID1_3RD_LAST</name>
          <description>Third last NFCID1 part (10 bytes ID)</description>
          <addressOffset>0x598</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>NFCID1_S</name>
              <description>NFCID1 byte S</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
            <field>
              <name>NFCID1_R</name>
              <description>NFCID1 byte R</description>
              <lsb>8</lsb>
              <msb>15</msb>
            </field>
            <field>
              <name>NFCID1_Q</name>
              <description>NFCID1 byte Q</description>
              <lsb>16</lsb>
              <msb>23</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SENSRES</name>
          <description>NFC-A SENS_RES auto-response settings</description>
          <addressOffset>0x5A0</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>BITFRAMESDD</name>
              <description>Bit frame SDD as defined by the b5:b1 of byte 1 in SENS_RES response in the NFC Forum, NFC Digital Protocol Technical Specification</description>
              <lsb>0</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SDD00000</name>
                  <description>SDD pattern 00000</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SDD00001</name>
                  <description>SDD pattern 00001</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SDD00010</name>
                  <description>SDD pattern 00010</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SDD00100</name>
                  <description>SDD pattern 00100</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SDD01000</name>
                  <description>SDD pattern 01000</description>
                  <value>8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>SDD10000</name>
                  <description>SDD pattern 10000</description>
                  <value>16</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RFU5</name>
              <description>Reserved for future use. Shall be 0.</description>
              <lsb>5</lsb>
              <msb>5</msb>
            </field>
            <field>
              <name>NFCIDSIZE</name>
              <description>NFCID1 size. This value is used by the Auto collision resolution engine.</description>
              <lsb>6</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NFCID1Single</name>
                  <description>NFCID1 size: single (4 bytes)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NFCID1Double</name>
                  <description>NFCID1 size: double (7 bytes)</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NFCID1Triple</name>
                  <description>NFCID1 size: triple (10 bytes)</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PLATFCONFIG</name>
              <description>Tag platform configuration as defined by the b4:b1 of byte 2 in SENS_RES response in the NFC Forum, NFC Digital Protocol Technical Specification</description>
              <lsb>8</lsb>
              <msb>11</msb>
            </field>
            <field>
              <name>RFU74</name>
              <description>Reserved for future use. Shall be 0.</description>
              <lsb>12</lsb>
              <msb>15</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SELRES</name>
          <description>NFC-A SEL_RES auto-response settings</description>
          <addressOffset>0x5A4</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>RFU10</name>
              <description>Reserved for future use. Shall be 0.</description>
              <lsb>0</lsb>
              <msb>1</msb>
            </field>
            <field>
              <name>CASCADE</name>
              <description>Cascade bit (controlled by hardware, write has no effect)</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Complete</name>
                  <description>NFCID1 complete</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NotComplete</name>
                  <description>NFCID1 not complete</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RFU43</name>
              <description>Reserved for future use. Shall be 0.</description>
              <lsb>3</lsb>
              <msb>4</msb>
            </field>
            <field>
              <name>PROTOCOL</name>
              <description>Protocol as defined by the b7:b6 of SEL_RES response in the NFC Forum, NFC Digital Protocol Technical Specification</description>
              <lsb>5</lsb>
              <msb>6</msb>
            </field>
            <field>
              <name>RFU7</name>
              <description>Reserved for future use. Shall be 0.</description>
              <lsb>7</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>GPIOTE</name>
      <description>GPIO Tasks and Events</description>
      <groupName>GPIOTE</groupName>
      <baseAddress>0x40006000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>GPIOTE</name>
        <value>6</value>
      </interrupt>
      <registers>
        <register>
          <dim>8</dim>
          <dimIncrement>4</dimIncrement>
          <name>TASKS_OUT[%s]</name>
          <description>Description collection[0]:  Task for writing to pin specified in CONFIG[0].PSEL. Action on pin is configured in CONFIG[0].POLARITY.</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <dim>8</dim>
          <dimIncrement>4</dimIncrement>
          <name>TASKS_SET[%s]</name>
          <description>Description collection[0]:  Task for writing to pin specified in CONFIG[0].PSEL. Action on pin is to set it high.</description>
          <addressOffset>0x030</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <dim>8</dim>
          <dimIncrement>4</dimIncrement>
          <name>TASKS_CLR[%s]</name>
          <description>Description collection[0]:  Task for writing to pin specified in CONFIG[0].PSEL. Action on pin is to set it low.</description>
          <addressOffset>0x060</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <dim>8</dim>
          <dimIncrement>4</dimIncrement>
          <name>EVENTS_IN[%s]</name>
          <description>Description collection[0]:  Event generated from pin specified in CONFIG[0].PSEL</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_PORT</name>
          <description>Event generated from multiple input GPIO pins with SENSE mechanism enabled</description>
          <addressOffset>0x17C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>IN0</name>
              <description>Write '1' to Enable interrupt for IN[0] event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN1</name>
              <description>Write '1' to Enable interrupt for IN[1] event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN2</name>
              <description>Write '1' to Enable interrupt for IN[2] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN3</name>
              <description>Write '1' to Enable interrupt for IN[3] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN4</name>
              <description>Write '1' to Enable interrupt for IN[4] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN5</name>
              <description>Write '1' to Enable interrupt for IN[5] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN6</name>
              <description>Write '1' to Enable interrupt for IN[6] event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN7</name>
              <description>Write '1' to Enable interrupt for IN[7] event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PORT</name>
              <description>Write '1' to Enable interrupt for PORT event</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>IN0</name>
              <description>Write '1' to Disable interrupt for IN[0] event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN1</name>
              <description>Write '1' to Disable interrupt for IN[1] event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN2</name>
              <description>Write '1' to Disable interrupt for IN[2] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN3</name>
              <description>Write '1' to Disable interrupt for IN[3] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN4</name>
              <description>Write '1' to Disable interrupt for IN[4] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN5</name>
              <description>Write '1' to Disable interrupt for IN[5] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN6</name>
              <description>Write '1' to Disable interrupt for IN[6] event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>IN7</name>
              <description>Write '1' to Disable interrupt for IN[7] event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PORT</name>
              <description>Write '1' to Disable interrupt for PORT event</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <dim>8</dim>
          <dimIncrement>4</dimIncrement>
          <name>CONFIG[%s]</name>
          <description>Description collection[0]:  Configuration for OUT[n], SET[n] and CLR[n] tasks and IN[n] event</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>MODE</name>
              <description>Mode</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled. Pin specified by PSEL will not be acquired by the GPIOTE module.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Event</name>
                  <description>Event mode</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Task</name>
                  <description>Task mode</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PSEL</name>
              <description>GPIO number associated with SET[n], CLR[n] and OUT[n] tasks and IN[n] event</description>
              <lsb>8</lsb>
              <msb>12</msb>
            </field>
            <field>
              <name>POLARITY</name>
              <description>When In task mode: Operation to be performed on output when OUT[n] task is triggered. When In event mode: Operation on input that shall trigger IN[n] event.</description>
              <lsb>16</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>None</name>
                  <description>Task mode: No effect on pin from OUT[n] task. Event mode: no IN[n] event generated on pin activity.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LoToHi</name>
                  <description>Task mode: Set pin from OUT[n] task. Event mode: Generate IN[n] event when rising edge on pin.</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>HiToLo</name>
                  <description>Task mode: Clear pin from OUT[n] task. Event mode: Generate IN[n] event when falling edge on pin.</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Toggle</name>
                  <description>Task mode: Toggle pin from OUT[n]. Event mode: Generate IN[n] when any change on pin.</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OUTINIT</name>
              <description>When in task mode: Initial value of the output when the GPIOTE channel is configured. When in event mode: No effect.</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Task mode: Initial value of pin before task triggering is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Task mode: Initial value of pin before task triggering is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SAADC</name>
      <description>Analog to Digital Converter</description>
      <groupName>SAADC</groupName>
      <baseAddress>0x40007000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SAADC</name>
        <value>7</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start the ADC and prepare the result buffer in RAM</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_SAMPLE</name>
          <description>Take one ADC sample, if scan is enabled all channels are sampled</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop the ADC and terminate any on-going conversion</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_CALIBRATEOFFSET</name>
          <description>Starts offset auto-calibration</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_STARTED</name>
          <description>The ADC has started</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_END</name>
          <description>The ADC has filled up the Result buffer</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_DONE</name>
          <description>A conversion task has been completed. Depending on the mode, multiple conversions might be needed for a result to be transferred to RAM.</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RESULTDONE</name>
          <description>A result is ready to get transferred to RAM.</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_CALIBRATEDONE</name>
          <description>Calibration is complete</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>The ADC has stopped</description>
          <addressOffset>0x114</addressOffset>
          <access>read-write</access>
        </register>
        <cluster>
          <dim>8</dim>
          <dimIncrement>8</dimIncrement>
          <name>EVENTS_CH[%s]</name>
          <description>Unspecified</description>
          <addressOffset>0x118</addressOffset>
          <register>
            <name>LIMITH</name>
            <description>Description cluster[0]:  Last results is equal or above CH[0].LIMIT.HIGH</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
          </register>
          <register>
            <name>LIMITL</name>
            <description>Description cluster[0]:  Last results is equal or below CH[0].LIMIT.LOW</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
          </register>
        </cluster>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STARTED</name>
              <description>Enable or disable interrupt for STARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Enable or disable interrupt for END event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <description>Enable or disable interrupt for DONE event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RESULTDONE</name>
              <description>Enable or disable interrupt for RESULTDONE event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALIBRATEDONE</name>
              <description>Enable or disable interrupt for CALIBRATEDONE event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Enable or disable interrupt for STOPPED event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH0LIMITH</name>
              <description>Enable or disable interrupt for CH[0].LIMITH event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH0LIMITL</name>
              <description>Enable or disable interrupt for CH[0].LIMITL event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1LIMITH</name>
              <description>Enable or disable interrupt for CH[1].LIMITH event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1LIMITL</name>
              <description>Enable or disable interrupt for CH[1].LIMITL event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2LIMITH</name>
              <description>Enable or disable interrupt for CH[2].LIMITH event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2LIMITL</name>
              <description>Enable or disable interrupt for CH[2].LIMITL event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3LIMITH</name>
              <description>Enable or disable interrupt for CH[3].LIMITH event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3LIMITL</name>
              <description>Enable or disable interrupt for CH[3].LIMITL event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4LIMITH</name>
              <description>Enable or disable interrupt for CH[4].LIMITH event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4LIMITL</name>
              <description>Enable or disable interrupt for CH[4].LIMITL event</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5LIMITH</name>
              <description>Enable or disable interrupt for CH[5].LIMITH event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5LIMITL</name>
              <description>Enable or disable interrupt for CH[5].LIMITL event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6LIMITH</name>
              <description>Enable or disable interrupt for CH[6].LIMITH event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6LIMITL</name>
              <description>Enable or disable interrupt for CH[6].LIMITL event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7LIMITH</name>
              <description>Enable or disable interrupt for CH[7].LIMITH event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7LIMITL</name>
              <description>Enable or disable interrupt for CH[7].LIMITL event</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STARTED</name>
              <description>Write '1' to Enable interrupt for STARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to Enable interrupt for END event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <description>Write '1' to Enable interrupt for DONE event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RESULTDONE</name>
              <description>Write '1' to Enable interrupt for RESULTDONE event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALIBRATEDONE</name>
              <description>Write '1' to Enable interrupt for CALIBRATEDONE event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Enable interrupt for STOPPED event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH0LIMITH</name>
              <description>Write '1' to Enable interrupt for CH[0].LIMITH event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH0LIMITL</name>
              <description>Write '1' to Enable interrupt for CH[0].LIMITL event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1LIMITH</name>
              <description>Write '1' to Enable interrupt for CH[1].LIMITH event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1LIMITL</name>
              <description>Write '1' to Enable interrupt for CH[1].LIMITL event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2LIMITH</name>
              <description>Write '1' to Enable interrupt for CH[2].LIMITH event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2LIMITL</name>
              <description>Write '1' to Enable interrupt for CH[2].LIMITL event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3LIMITH</name>
              <description>Write '1' to Enable interrupt for CH[3].LIMITH event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3LIMITL</name>
              <description>Write '1' to Enable interrupt for CH[3].LIMITL event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4LIMITH</name>
              <description>Write '1' to Enable interrupt for CH[4].LIMITH event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4LIMITL</name>
              <description>Write '1' to Enable interrupt for CH[4].LIMITL event</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5LIMITH</name>
              <description>Write '1' to Enable interrupt for CH[5].LIMITH event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5LIMITL</name>
              <description>Write '1' to Enable interrupt for CH[5].LIMITL event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6LIMITH</name>
              <description>Write '1' to Enable interrupt for CH[6].LIMITH event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6LIMITL</name>
              <description>Write '1' to Enable interrupt for CH[6].LIMITL event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7LIMITH</name>
              <description>Write '1' to Enable interrupt for CH[7].LIMITH event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7LIMITL</name>
              <description>Write '1' to Enable interrupt for CH[7].LIMITL event</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STARTED</name>
              <description>Write '1' to Disable interrupt for STARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to Disable interrupt for END event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DONE</name>
              <description>Write '1' to Disable interrupt for DONE event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RESULTDONE</name>
              <description>Write '1' to Disable interrupt for RESULTDONE event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CALIBRATEDONE</name>
              <description>Write '1' to Disable interrupt for CALIBRATEDONE event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Disable interrupt for STOPPED event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH0LIMITH</name>
              <description>Write '1' to Disable interrupt for CH[0].LIMITH event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH0LIMITL</name>
              <description>Write '1' to Disable interrupt for CH[0].LIMITL event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1LIMITH</name>
              <description>Write '1' to Disable interrupt for CH[1].LIMITH event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1LIMITL</name>
              <description>Write '1' to Disable interrupt for CH[1].LIMITL event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2LIMITH</name>
              <description>Write '1' to Disable interrupt for CH[2].LIMITH event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2LIMITL</name>
              <description>Write '1' to Disable interrupt for CH[2].LIMITL event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3LIMITH</name>
              <description>Write '1' to Disable interrupt for CH[3].LIMITH event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3LIMITL</name>
              <description>Write '1' to Disable interrupt for CH[3].LIMITL event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4LIMITH</name>
              <description>Write '1' to Disable interrupt for CH[4].LIMITH event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4LIMITL</name>
              <description>Write '1' to Disable interrupt for CH[4].LIMITL event</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5LIMITH</name>
              <description>Write '1' to Disable interrupt for CH[5].LIMITH event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5LIMITL</name>
              <description>Write '1' to Disable interrupt for CH[5].LIMITL event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6LIMITH</name>
              <description>Write '1' to Disable interrupt for CH[6].LIMITH event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6LIMITL</name>
              <description>Write '1' to Disable interrupt for CH[6].LIMITL event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7LIMITH</name>
              <description>Write '1' to Disable interrupt for CH[7].LIMITH event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7LIMITL</name>
              <description>Write '1' to Disable interrupt for CH[7].LIMITL event</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>STATUS</name>
          <description>Status</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>STATUS</name>
              <description>Status</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Ready</name>
                  <description>ADC is ready. No on-going conversion.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Busy</name>
                  <description>ADC is busy. Conversion in progress.</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable or disable ADC</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable ADC</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable ADC</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable ADC</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <dim>8</dim>
          <dimIncrement>16</dimIncrement>
          <name>CH[%s]</name>
          <description>Unspecified</description>
          <addressOffset>0x510</addressOffset>
          <register>
            <name>PSELP</name>
            <description>Description cluster[0]:  Input positive pin selection for CH[0]</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>PSELP</name>
                <description>Analog positive input channel</description>
                <lsb>0</lsb>
                <msb>4</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NC</name>
                    <description>Not connected</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput0</name>
                    <description>AIN0</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput1</name>
                    <description>AIN1</description>
                    <value>2</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput2</name>
                    <description>AIN2</description>
                    <value>3</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput3</name>
                    <description>AIN3</description>
                    <value>4</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput4</name>
                    <description>AIN4</description>
                    <value>5</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput5</name>
                    <description>AIN5</description>
                    <value>6</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput6</name>
                    <description>AIN6</description>
                    <value>7</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput7</name>
                    <description>AIN7</description>
                    <value>8</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>VDD</name>
                    <description>VDD</description>
                    <value>9</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>PSELN</name>
            <description>Description cluster[0]:  Input negative pin selection for CH[0]</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>PSELN</name>
                <description>Analog negative input, enables differential channel</description>
                <lsb>0</lsb>
                <msb>4</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NC</name>
                    <description>Not connected</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput0</name>
                    <description>AIN0</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput1</name>
                    <description>AIN1</description>
                    <value>2</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput2</name>
                    <description>AIN2</description>
                    <value>3</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput3</name>
                    <description>AIN3</description>
                    <value>4</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput4</name>
                    <description>AIN4</description>
                    <value>5</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput5</name>
                    <description>AIN5</description>
                    <value>6</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput6</name>
                    <description>AIN6</description>
                    <value>7</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>AnalogInput7</name>
                    <description>AIN7</description>
                    <value>8</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>VDD</name>
                    <description>VDD</description>
                    <value>9</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>CONFIG</name>
            <description>Description cluster[0]:  Input configuration for CH[0]</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0x00020000</resetValue>
            <fields>
              <field>
                <name>RESP</name>
                <description>Positive channel resistor control</description>
                <lsb>0</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Bypass</name>
                    <description>Bypass resistor ladder</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Pulldown</name>
                    <description>Pull-down to GND</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Pullup</name>
                    <description>Pull-up to VDD</description>
                    <value>2</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>VDD1_2</name>
                    <description>Set input at VDD/2</description>
                    <value>3</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>RESN</name>
                <description>Negative channel resistor control</description>
                <lsb>4</lsb>
                <msb>5</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Bypass</name>
                    <description>Bypass resistor ladder</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Pulldown</name>
                    <description>Pull-down to GND</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Pullup</name>
                    <description>Pull-up to VDD</description>
                    <value>2</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>VDD1_2</name>
                    <description>Set input at VDD/2</description>
                    <value>3</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>GAIN</name>
                <description>Gain control</description>
                <lsb>8</lsb>
                <msb>10</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Gain1_6</name>
                    <description>1/6</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain1_5</name>
                    <description>1/5</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain1_4</name>
                    <description>1/4</description>
                    <value>2</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain1_3</name>
                    <description>1/3</description>
                    <value>3</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain1_2</name>
                    <description>1/2</description>
                    <value>4</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain1</name>
                    <description>1</description>
                    <value>5</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain2</name>
                    <description>2</description>
                    <value>6</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Gain4</name>
                    <description>4</description>
                    <value>7</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>REFSEL</name>
                <description>Reference control</description>
                <lsb>12</lsb>
                <msb>12</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Internal</name>
                    <description>Internal reference (0.6 V)</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>VDD1_4</name>
                    <description>VDD/4 as reference</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>TACQ</name>
                <description>Acquisition time, the time the ADC uses to sample the input voltage</description>
                <lsb>16</lsb>
                <msb>18</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>3us</name>
                    <description>3 us</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>5us</name>
                    <description>5 us</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>10us</name>
                    <description>10 us</description>
                    <value>2</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>15us</name>
                    <description>15 us</description>
                    <value>3</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>20us</name>
                    <description>20 us</description>
                    <value>4</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>40us</name>
                    <description>40 us</description>
                    <value>5</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>MODE</name>
                <description>Enable differential mode</description>
                <lsb>20</lsb>
                <msb>20</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>SE</name>
                    <description>Single ended, PSELN will be ignored, negative input to ADC shorted to GND</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Diff</name>
                    <description>Differential</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>BURST</name>
                <description>Enable burst mode</description>
                <lsb>24</lsb>
                <msb>24</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Burst mode is disabled (normal operation)</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Enabled</name>
                    <description>Burst mode is enabled. SAADC takes 2^OVERSAMPLE number of samples as fast as it can, and sends the average to Data RAM.</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>LIMIT</name>
            <description>Description cluster[0]:  High/low limits for event monitoring a channel</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <resetValue>0x7FFF8000</resetValue>
            <fields>
              <field>
                <name>LOW</name>
                <description>Low level limit</description>
                <lsb>0</lsb>
                <msb>15</msb>
              </field>
              <field>
                <name>HIGH</name>
                <description>High level limit</description>
                <lsb>16</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>RESOLUTION</name>
          <description>Resolution configuration</description>
          <addressOffset>0x5F0</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>VAL</name>
              <description>Set the resolution</description>
              <lsb>0</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>8bit</name>
                  <description>8 bit</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>10bit</name>
                  <description>10 bit</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>12bit</name>
                  <description>12 bit</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>14bit</name>
                  <description>14 bit</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>OVERSAMPLE</name>
          <description>Oversampling configuration. OVERSAMPLE should not be combined with SCAN. The RESOLUTION is applied before averaging, thus for high OVERSAMPLE a higher RESOLUTION should be used.</description>
          <addressOffset>0x5F4</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>OVERSAMPLE</name>
              <description>Oversample control</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Bypass</name>
                  <description>Bypass oversampling</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over2x</name>
                  <description>Oversample 2x</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over4x</name>
                  <description>Oversample 4x</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over8x</name>
                  <description>Oversample 8x</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over16x</name>
                  <description>Oversample 16x</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over32x</name>
                  <description>Oversample 32x</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over64x</name>
                  <description>Oversample 64x</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over128x</name>
                  <description>Oversample 128x</description>
                  <value>7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Over256x</name>
                  <description>Oversample 256x</description>
                  <value>8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SAMPLERATE</name>
          <description>Controls normal or continuous sample rate</description>
          <addressOffset>0x5F8</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CC</name>
              <description>Capture and compare value. Sample rate is 16 MHz/CC</description>
              <lsb>0</lsb>
              <msb>10</msb>
            </field>
            <field>
              <name>MODE</name>
              <description>Select mode for sample rate control</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Task</name>
                  <description>Rate is controlled from SAMPLE task</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Timers</name>
                  <description>Rate is controlled from local timer (use CC to control the rate)</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>RESULT</name>
          <description>RESULT EasyDMA channel</description>
          <addressOffset>0x62C</addressOffset>
          <register>
            <name>PTR</name>
            <description>Data pointer</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>PTR</name>
                <description>Data pointer</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Maximum number of buffer words to transfer</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Maximum number of buffer words to transfer</description>
                <lsb>0</lsb>
                <msb>14</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>AMOUNT</name>
            <description>Number of buffer words transferred since last START</description>
            <addressOffset>0x008</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>AMOUNT</name>
                <description>Number of buffer words transferred since last START. This register can be read after an END or STOPPED event.</description>
                <lsb>0</lsb>
                <msb>14</msb>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral>
      <name>TIMER0</name>
      <description>Timer/Counter 0</description>
      <groupName>TIMER</groupName>
      <baseAddress>0x40008000</baseAddress>
      <size>32</size>
      <headerStructName>TIMER</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>TIMER0</name>
        <value>8</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start Timer</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop Timer</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_COUNT</name>
          <description>Increment Timer (Counter mode only)</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_CLEAR</name>
          <description>Clear time</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_SHUTDOWN</name>
          <description>Deprecated register -  Shut down timer</description>
          <addressOffset>0x010</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <dim>6</dim>
          <dimIncrement>4</dimIncrement>
          <name>TASKS_CAPTURE[%s]</name>
          <description>Description collection[0]:  Capture Timer value to CC[0] register</description>
          <addressOffset>0x040</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <dim>6</dim>
          <dimIncrement>4</dimIncrement>
          <name>EVENTS_COMPARE[%s]</name>
          <description>Description collection[0]:  Compare event on CC[0] match</description>
          <addressOffset>0x140</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>COMPARE0_CLEAR</name>
              <description>Shortcut between COMPARE[0] event and CLEAR task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1_CLEAR</name>
              <description>Shortcut between COMPARE[1] event and CLEAR task</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2_CLEAR</name>
              <description>Shortcut between COMPARE[2] event and CLEAR task</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3_CLEAR</name>
              <description>Shortcut between COMPARE[3] event and CLEAR task</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE4_CLEAR</name>
              <description>Shortcut between COMPARE[4] event and CLEAR task</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE5_CLEAR</name>
              <description>Shortcut between COMPARE[5] event and CLEAR task</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE0_STOP</name>
              <description>Shortcut between COMPARE[0] event and STOP task</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1_STOP</name>
              <description>Shortcut between COMPARE[1] event and STOP task</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2_STOP</name>
              <description>Shortcut between COMPARE[2] event and STOP task</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3_STOP</name>
              <description>Shortcut between COMPARE[3] event and STOP task</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE4_STOP</name>
              <description>Shortcut between COMPARE[4] event and STOP task</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE5_STOP</name>
              <description>Shortcut between COMPARE[5] event and STOP task</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>COMPARE0</name>
              <description>Write '1' to Enable interrupt for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Write '1' to Enable interrupt for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Write '1' to Enable interrupt for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Write '1' to Enable interrupt for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE4</name>
              <description>Write '1' to Enable interrupt for COMPARE[4] event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE5</name>
              <description>Write '1' to Enable interrupt for COMPARE[5] event</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>COMPARE0</name>
              <description>Write '1' to Disable interrupt for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Write '1' to Disable interrupt for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Write '1' to Disable interrupt for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Write '1' to Disable interrupt for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE4</name>
              <description>Write '1' to Disable interrupt for COMPARE[4] event</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE5</name>
              <description>Write '1' to Disable interrupt for COMPARE[5] event</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE</name>
          <description>Timer mode selection</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>MODE</name>
              <description>Timer mode</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Timer</name>
                  <description>Select Timer mode</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Counter</name>
                  <description>Deprecated enumerator -  Select Counter mode</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LowPowerCounter</name>
                  <description>Select Low Power Counter mode</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>BITMODE</name>
          <description>Configure the number of bits used by the TIMER</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>BITMODE</name>
              <description>Timer bit width</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>16Bit</name>
                  <description>16 bit timer bit width</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>08Bit</name>
                  <description>8 bit timer bit width</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>24Bit</name>
                  <description>24 bit timer bit width</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32Bit</name>
                  <description>32 bit timer bit width</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PRESCALER</name>
          <description>Timer prescaler register</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000004</resetValue>
          <fields>
            <field>
              <name>PRESCALER</name>
              <description>Prescaler value</description>
              <lsb>0</lsb>
              <msb>3</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>6</dim>
          <dimIncrement>4</dimIncrement>
          <name>CC[%s]</name>
          <description>Description collection[0]:  Capture/Compare register 0</description>
          <addressOffset>0x540</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CC</name>
              <description>Capture/Compare value</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="TIMER0">
      <name>TIMER1</name>
      <description>Timer/Counter 1</description>
      <groupName>TIMER</groupName>
      <baseAddress>0x40009000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>TIMER1</name>
        <value>9</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="TIMER0">
      <name>TIMER2</name>
      <description>Timer/Counter 2</description>
      <groupName>TIMER</groupName>
      <baseAddress>0x4000A000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>TIMER2</name>
        <value>10</value>
      </interrupt>
    </peripheral>
    <peripheral>
      <name>RTC0</name>
      <description>Real time counter 0</description>
      <groupName>RTC</groupName>
      <baseAddress>0x4000B000</baseAddress>
      <size>32</size>
      <headerStructName>RTC</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>RTC0</name>
        <value>11</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start RTC COUNTER</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop RTC COUNTER</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_CLEAR</name>
          <description>Clear RTC COUNTER</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_TRIGOVRFLW</name>
          <description>Set COUNTER to 0xFFFFF0</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_TICK</name>
          <description>Event on COUNTER increment</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_OVRFLW</name>
          <description>Event on COUNTER overflow</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <dim>4</dim>
          <dimIncrement>4</dimIncrement>
          <name>EVENTS_COMPARE[%s]</name>
          <description>Description collection[0]:  Compare event on CC[0] match</description>
          <addressOffset>0x140</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TICK</name>
              <description>Write '1' to Enable interrupt for TICK event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVRFLW</name>
              <description>Write '1' to Enable interrupt for OVRFLW event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE0</name>
              <description>Write '1' to Enable interrupt for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Write '1' to Enable interrupt for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Write '1' to Enable interrupt for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Write '1' to Enable interrupt for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TICK</name>
              <description>Write '1' to Disable interrupt for TICK event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVRFLW</name>
              <description>Write '1' to Disable interrupt for OVRFLW event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE0</name>
              <description>Write '1' to Disable interrupt for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Write '1' to Disable interrupt for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Write '1' to Disable interrupt for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Write '1' to Disable interrupt for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>EVTEN</name>
          <description>Enable or disable event routing</description>
          <addressOffset>0x340</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TICK</name>
              <description>Enable or disable event routing for TICK event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVRFLW</name>
              <description>Enable or disable event routing for OVRFLW event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE0</name>
              <description>Enable or disable event routing for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Enable or disable event routing for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Enable or disable event routing for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Enable or disable event routing for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>EVTENSET</name>
          <description>Enable event routing</description>
          <addressOffset>0x344</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TICK</name>
              <description>Write '1' to Enable event routing for TICK event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVRFLW</name>
              <description>Write '1' to Enable event routing for OVRFLW event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE0</name>
              <description>Write '1' to Enable event routing for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Write '1' to Enable event routing for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Write '1' to Enable event routing for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Write '1' to Enable event routing for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>EVTENCLR</name>
          <description>Disable event routing</description>
          <addressOffset>0x348</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TICK</name>
              <description>Write '1' to Disable event routing for TICK event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>OVRFLW</name>
              <description>Write '1' to Disable event routing for OVRFLW event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE0</name>
              <description>Write '1' to Disable event routing for COMPARE[0] event</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE1</name>
              <description>Write '1' to Disable event routing for COMPARE[1] event</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE2</name>
              <description>Write '1' to Disable event routing for COMPARE[2] event</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>COMPARE3</name>
              <description>Write '1' to Disable event routing for COMPARE[3] event</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>COUNTER</name>
          <description>Current COUNTER value</description>
          <addressOffset>0x504</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>COUNTER</name>
              <description>Counter value</description>
              <lsb>0</lsb>
              <msb>23</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>PRESCALER</name>
          <description>12 bit prescaler for COUNTER frequency (32768/(PRESCALER+1)).Must be written when RTC is stopped</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PRESCALER</name>
              <description>Prescaler value</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <dim>4</dim>
          <dimIncrement>4</dimIncrement>
          <name>CC[%s]</name>
          <description>Description collection[0]:  Compare register 0</description>
          <addressOffset>0x540</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>COMPARE</name>
              <description>Compare value</description>
              <lsb>0</lsb>
              <msb>23</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>TEMP</name>
      <description>Temperature Sensor</description>
      <groupName>TEMP</groupName>
      <baseAddress>0x4000C000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>TEMP</name>
        <value>12</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start temperature measurement</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop temperature measurement</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_DATARDY</name>
          <description>Temperature measurement complete, data ready</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DATARDY</name>
              <description>Write '1' to Enable interrupt for DATARDY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DATARDY</name>
              <description>Write '1' to Disable interrupt for DATARDY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>TEMP</name>
          <description>Temperature in degC (0.25deg steps)</description>
          <addressOffset>0x508</addressOffset>
          <access>read-only</access>
          <dataType>int32_t</dataType>
          <fields>
            <field>
              <name>TEMP</name>
              <description>Temperature in degC (0.25deg steps)</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>A0</name>
          <description>Slope of 1st piece wise linear function</description>
          <addressOffset>0x520</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000320</resetValue>
          <fields>
            <field>
              <name>A0</name>
              <description>Slope of 1st piece wise linear function</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>A1</name>
          <description>Slope of 2nd piece wise linear function</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000343</resetValue>
          <fields>
            <field>
              <name>A1</name>
              <description>Slope of 2nd piece wise linear function</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>A2</name>
          <description>Slope of 3rd piece wise linear function</description>
          <addressOffset>0x528</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000035D</resetValue>
          <fields>
            <field>
              <name>A2</name>
              <description>Slope of 3rd piece wise linear function</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>A3</name>
          <description>Slope of 4th piece wise linear function</description>
          <addressOffset>0x52C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000400</resetValue>
          <fields>
            <field>
              <name>A3</name>
              <description>Slope of 4th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>A4</name>
          <description>Slope of 5th piece wise linear function</description>
          <addressOffset>0x530</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000047F</resetValue>
          <fields>
            <field>
              <name>A4</name>
              <description>Slope of 5th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>A5</name>
          <description>Slope of 6th piece wise linear function</description>
          <addressOffset>0x534</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000037B</resetValue>
          <fields>
            <field>
              <name>A5</name>
              <description>Slope of 6th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>11</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>B0</name>
          <description>y-intercept of 1st piece wise linear function</description>
          <addressOffset>0x540</addressOffset>
          <access>read-write</access>
          <resetValue>0x00003FCC</resetValue>
          <fields>
            <field>
              <name>B0</name>
              <description>y-intercept of 1st piece wise linear function</description>
              <lsb>0</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>B1</name>
          <description>y-intercept of 2nd piece wise linear function</description>
          <addressOffset>0x544</addressOffset>
          <access>read-write</access>
          <resetValue>0x00003F98</resetValue>
          <fields>
            <field>
              <name>B1</name>
              <description>y-intercept of 2nd piece wise linear function</description>
              <lsb>0</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>B2</name>
          <description>y-intercept of 3rd piece wise linear function</description>
          <addressOffset>0x548</addressOffset>
          <access>read-write</access>
          <resetValue>0x00003F98</resetValue>
          <fields>
            <field>
              <name>B2</name>
              <description>y-intercept of 3rd piece wise linear function</description>
              <lsb>0</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>B3</name>
          <description>y-intercept of 4th piece wise linear function</description>
          <addressOffset>0x54C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000012</resetValue>
          <fields>
            <field>
              <name>B3</name>
              <description>y-intercept of 4th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>B4</name>
          <description>y-intercept of 5th piece wise linear function</description>
          <addressOffset>0x550</addressOffset>
          <access>read-write</access>
          <resetValue>0x0000006A</resetValue>
          <fields>
            <field>
              <name>B4</name>
              <description>y-intercept of 5th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>B5</name>
          <description>y-intercept of 6th piece wise linear function</description>
          <addressOffset>0x554</addressOffset>
          <access>read-write</access>
          <resetValue>0x00003DD0</resetValue>
          <fields>
            <field>
              <name>B5</name>
              <description>y-intercept of 6th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>T0</name>
          <description>End point of 1st piece wise linear function</description>
          <addressOffset>0x560</addressOffset>
          <access>read-write</access>
          <resetValue>0x000000E2</resetValue>
          <fields>
            <field>
              <name>T0</name>
              <description>End point of 1st piece wise linear function</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>T1</name>
          <description>End point of 2nd piece wise linear function</description>
          <addressOffset>0x564</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>T1</name>
              <description>End point of 2nd piece wise linear function</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>T2</name>
          <description>End point of 3rd piece wise linear function</description>
          <addressOffset>0x568</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000014</resetValue>
          <fields>
            <field>
              <name>T2</name>
              <description>End point of 3rd piece wise linear function</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>T3</name>
          <description>End point of 4th piece wise linear function</description>
          <addressOffset>0x56C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000019</resetValue>
          <fields>
            <field>
              <name>T3</name>
              <description>End point of 4th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>T4</name>
          <description>End point of 5th piece wise linear function</description>
          <addressOffset>0x570</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000050</resetValue>
          <fields>
            <field>
              <name>T4</name>
              <description>End point of 5th piece wise linear function</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>RNG</name>
      <description>Random Number Generator</description>
      <groupName>RNG</groupName>
      <baseAddress>0x4000D000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>RNG</name>
        <value>13</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Task starting the random number generator</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Task stopping the random number generator</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_VALRDY</name>
          <description>Event being generated for every new random number written to the VALUE register</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>VALRDY_STOP</name>
              <description>Shortcut between VALRDY event and STOP task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>VALRDY</name>
              <description>Write '1' to Enable interrupt for VALRDY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>VALRDY</name>
              <description>Write '1' to Disable interrupt for VALRDY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG</name>
          <description>Configuration register</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DERCEN</name>
              <description>Bias correction</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>VALUE</name>
          <description>Output random number</description>
          <addressOffset>0x508</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>VALUE</name>
              <description>Generated random number</description>
              <lsb>0</lsb>
              <msb>7</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>ECB</name>
      <description>AES ECB Mode Encryption</description>
      <groupName>ECB</groupName>
      <baseAddress>0x4000E000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>ECB</name>
        <value>14</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_STARTECB</name>
          <description>Start ECB block encrypt</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOPECB</name>
          <description>Abort a possible executing ECB operation</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_ENDECB</name>
          <description>ECB block encrypt complete</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ERRORECB</name>
          <description>ECB block encrypt aborted because of a STOPECB task or due to an error</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENDECB</name>
              <description>Write '1' to Enable interrupt for ENDECB event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERRORECB</name>
              <description>Write '1' to Enable interrupt for ERRORECB event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENDECB</name>
              <description>Write '1' to Disable interrupt for ENDECB event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERRORECB</name>
              <description>Write '1' to Disable interrupt for ERRORECB event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ECBDATAPTR</name>
          <description>ECB block encrypt memory pointers</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ECBDATAPTR</name>
              <description>Pointer to the ECB data structure (see Table 1 ECB data structure overview)</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>CCM</name>
      <description>AES CCM Mode Encryption</description>
      <groupName>CCM</groupName>
      <baseAddress>0x4000F000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>CCM_AAR</name>
        <value>15</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_KSGEN</name>
          <description>Start generation of key-stream. This operation will stop by itself when completed.</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_CRYPT</name>
          <description>Start encryption/decryption. This operation will stop by itself when completed.</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop encryption/decryption</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_ENDKSGEN</name>
          <description>Key-stream generation complete</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ENDCRYPT</name>
          <description>Encrypt/decrypt complete</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ERROR</name>
          <description>CCM error event</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENDKSGEN_CRYPT</name>
              <description>Shortcut between ENDKSGEN event and CRYPT task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENDKSGEN</name>
              <description>Write '1' to Enable interrupt for ENDKSGEN event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDCRYPT</name>
              <description>Write '1' to Enable interrupt for ENDCRYPT event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Enable interrupt for ERROR event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENDKSGEN</name>
              <description>Write '1' to Disable interrupt for ENDKSGEN event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ENDCRYPT</name>
              <description>Write '1' to Disable interrupt for ENDCRYPT event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ERROR</name>
              <description>Write '1' to Disable interrupt for ERROR event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MICSTATUS</name>
          <description>MIC check result</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>MICSTATUS</name>
              <description>The result of the MIC check performed during the previous decryption operation</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>CheckFailed</name>
                  <description>MIC check failed</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>CheckPassed</name>
                  <description>MIC check passed</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable CCM</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE</name>
          <description>Operation mode</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>MODE</name>
              <description>The mode of operation to be used</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Encryption</name>
                  <description>AES CCM packet encryption mode</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Decryption</name>
                  <description>AES CCM packet decryption mode</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DATARATE</name>
              <description>Data rate that the CCM shall run in synch with</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1Mbit</name>
                  <description>In synch with 1 Mbit data rate</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2Mbit</name>
                  <description>In synch with 2 Mbit data rate</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LENGTH</name>
              <description>Packet length configuration</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Default</name>
                  <description>Default length. Effective length of LENGTH field is 5-bit</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Extended</name>
                  <description>Extended length. Effective length of LENGTH field is 8-bit</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CNFPTR</name>
          <description>Pointer to data structure holding AES key and NONCE vector</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CNFPTR</name>
              <description>Pointer to the data structure holding the AES key and the CCM NONCE vector (see Table 1 CCM data structure overview)</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>INPTR</name>
          <description>Input pointer</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>INPTR</name>
              <description>Input pointer</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>OUTPTR</name>
          <description>Output pointer</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>OUTPTR</name>
              <description>Output pointer</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SCRATCHPTR</name>
          <description>Pointer to data area used for temporary storage</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SCRATCHPTR</name>
              <description>Pointer to a scratch data area used for temporary storage during key-stream generation, MIC generation and encryption/decryption.</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>AAR</name>
      <description>Accelerated Address Resolver</description>
      <groupName>AAR</groupName>
      <baseAddress>0x4000F000</baseAddress>
      <size>32</size>
      <alternatePeripheral>CCM</alternatePeripheral>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>CCM_AAR</name>
        <value>15</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start resolving addresses based on IRKs specified in the IRK data structure</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop resolving addresses</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_END</name>
          <description>Address resolution procedure complete</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_RESOLVED</name>
          <description>Address resolved</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_NOTRESOLVED</name>
          <description>Address not resolved</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>END</name>
              <description>Write '1' to Enable interrupt for END event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RESOLVED</name>
              <description>Write '1' to Enable interrupt for RESOLVED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NOTRESOLVED</name>
              <description>Write '1' to Enable interrupt for NOTRESOLVED event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>END</name>
              <description>Write '1' to Disable interrupt for END event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RESOLVED</name>
              <description>Write '1' to Disable interrupt for RESOLVED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>NOTRESOLVED</name>
              <description>Write '1' to Disable interrupt for NOTRESOLVED event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>STATUS</name>
          <description>Resolution status</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>STATUS</name>
              <description>The IRK that was used last time an address was resolved</description>
              <lsb>0</lsb>
              <msb>3</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable AAR</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable AAR</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>NIRK</name>
          <description>Number of IRKs</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>NIRK</name>
              <description>Number of Identity root keys available in the IRK data structure</description>
              <lsb>0</lsb>
              <msb>4</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>IRKPTR</name>
          <description>Pointer to IRK data structure</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>IRKPTR</name>
              <description>Pointer to the IRK data structure</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ADDRPTR</name>
          <description>Pointer to the resolvable address</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ADDRPTR</name>
              <description>Pointer to the resolvable address (6-bytes)</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>SCRATCHPTR</name>
          <description>Pointer to data area used for temporary storage</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SCRATCHPTR</name>
              <description>Pointer to a scratch data area used for temporary storage during resolution.A space of minimum 3 bytes must be reserved.</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>WDT</name>
      <description>Watchdog Timer</description>
      <groupName>WDT</groupName>
      <baseAddress>0x40010000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>WDT</name>
        <value>16</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start the watchdog</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_TIMEOUT</name>
          <description>Watchdog timeout</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TIMEOUT</name>
              <description>Write '1' to Enable interrupt for TIMEOUT event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TIMEOUT</name>
              <description>Write '1' to Disable interrupt for TIMEOUT event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RUNSTATUS</name>
          <description>Run status</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>RUNSTATUS</name>
              <description>Indicates whether or not the watchdog is running</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotRunning</name>
                  <description>Watchdog not running</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Running</name>
                  <description>Watchdog is running</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>REQSTATUS</name>
          <description>Request status</description>
          <addressOffset>0x404</addressOffset>
          <access>read-only</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>RR0</name>
              <description>Request status for RR[0] register</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[0] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[0] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR1</name>
              <description>Request status for RR[1] register</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[1] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[1] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR2</name>
              <description>Request status for RR[2] register</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[2] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[2] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR3</name>
              <description>Request status for RR[3] register</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[3] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[3] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR4</name>
              <description>Request status for RR[4] register</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[4] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[4] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR5</name>
              <description>Request status for RR[5] register</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[5] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[5] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR6</name>
              <description>Request status for RR[6] register</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[6] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[6] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR7</name>
              <description>Request status for RR[7] register</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DisabledOrRequested</name>
                  <description>RR[7] register is not enabled, or are already requesting reload</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>EnabledAndUnrequested</name>
                  <description>RR[7] register is enabled, and are not yet requesting reload</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CRV</name>
          <description>Counter reload value</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <resetValue>0xFFFFFFFF</resetValue>
          <fields>
            <field>
              <name>CRV</name>
              <description>Counter reload value in number of cycles of the 32.768 kHz clock</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>RREN</name>
          <description>Enable register for reload request registers</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>RR0</name>
              <description>Enable or disable RR[0] register</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[0] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[0] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR1</name>
              <description>Enable or disable RR[1] register</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[1] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[1] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR2</name>
              <description>Enable or disable RR[2] register</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[2] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[2] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR3</name>
              <description>Enable or disable RR[3] register</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[3] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[3] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR4</name>
              <description>Enable or disable RR[4] register</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[4] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[4] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR5</name>
              <description>Enable or disable RR[5] register</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[5] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[5] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR6</name>
              <description>Enable or disable RR[6] register</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[6] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[6] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RR7</name>
              <description>Enable or disable RR[7] register</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable RR[7] register</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable RR[7] register</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG</name>
          <description>Configuration register</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000001</resetValue>
          <fields>
            <field>
              <name>SLEEP</name>
              <description>Configure the watchdog to either be paused, or kept running, while the CPU is sleeping</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Pause</name>
                  <description>Pause watchdog while the CPU is sleeping</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Run</name>
                  <description>Keep the watchdog running while the CPU is sleeping</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>HALT</name>
              <description>Configure the watchdog to either be paused, or kept running, while the CPU is halted by the debugger</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Pause</name>
                  <description>Pause watchdog while the CPU is halted by the debugger</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Run</name>
                  <description>Keep the watchdog running while the CPU is halted by the debugger</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <dim>8</dim>
          <dimIncrement>4</dimIncrement>
          <name>RR[%s]</name>
          <description>Description collection[0]:  Reload request 0</description>
          <addressOffset>0x600</addressOffset>
          <access>write-only</access>
          <fields>
            <field>
              <name>RR</name>
              <description>Reload request register</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Reload</name>
                  <description>Value to request a reload of the watchdog timer</description>
                  <value>0x6E524635</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="RTC0">
      <name>RTC1</name>
      <description>Real time counter 1</description>
      <groupName>RTC</groupName>
      <baseAddress>0x40011000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>RTC1</name>
        <value>17</value>
      </interrupt>
    </peripheral>
    <peripheral>
      <name>QDEC</name>
      <description>Quadrature Decoder</description>
      <groupName>QDEC</groupName>
      <baseAddress>0x40012000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>QDEC</name>
        <value>18</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Task starting the quadrature decoder</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Task stopping the quadrature decoder</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_READCLRACC</name>
          <description>Read and clear ACC and ACCDBL</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_RDCLRACC</name>
          <description>Read and clear ACC</description>
          <addressOffset>0x00C</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_RDCLRDBL</name>
          <description>Read and clear ACCDBL</description>
          <addressOffset>0x010</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_SAMPLERDY</name>
          <description>Event being generated for every new sample value written to the SAMPLE register</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_REPORTRDY</name>
          <description>Non-null report ready</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_ACCOF</name>
          <description>ACC or ACCDBL register overflow</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_DBLRDY</name>
          <description>Double displacement(s) detected</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>QDEC has been stopped</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REPORTRDY_READCLRACC</name>
              <description>Shortcut between REPORTRDY event and READCLRACC task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SAMPLERDY_STOP</name>
              <description>Shortcut between SAMPLERDY event and STOP task</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REPORTRDY_RDCLRACC</name>
              <description>Shortcut between REPORTRDY event and RDCLRACC task</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REPORTRDY_STOP</name>
              <description>Shortcut between REPORTRDY event and STOP task</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DBLRDY_RDCLRDBL</name>
              <description>Shortcut between DBLRDY event and RDCLRDBL task</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DBLRDY_STOP</name>
              <description>Shortcut between DBLRDY event and STOP task</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SAMPLERDY_READCLRACC</name>
              <description>Shortcut between SAMPLERDY event and READCLRACC task</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SAMPLERDY</name>
              <description>Write '1' to Enable interrupt for SAMPLERDY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REPORTRDY</name>
              <description>Write '1' to Enable interrupt for REPORTRDY event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACCOF</name>
              <description>Write '1' to Enable interrupt for ACCOF event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DBLRDY</name>
              <description>Write '1' to Enable interrupt for DBLRDY event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Enable interrupt for STOPPED event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SAMPLERDY</name>
              <description>Write '1' to Disable interrupt for SAMPLERDY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REPORTRDY</name>
              <description>Write '1' to Disable interrupt for REPORTRDY event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>ACCOF</name>
              <description>Write '1' to Disable interrupt for ACCOF event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DBLRDY</name>
              <description>Write '1' to Disable interrupt for DBLRDY event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Disable interrupt for STOPPED event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable the quadrature decoder</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable the quadrature decoder</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LEDPOL</name>
          <description>LED output pin polarity</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>LEDPOL</name>
              <description>LED output pin polarity</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>ActiveLow</name>
                  <description>Led active on output pin low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ActiveHigh</name>
                  <description>Led active on output pin high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SAMPLEPER</name>
          <description>Sample period</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SAMPLEPER</name>
              <description>Sample period. The SAMPLE register will be updated for every new sample</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>128us</name>
                  <description>128 us</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>256us</name>
                  <description>256 us</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>512us</name>
                  <description>512 us</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1024us</name>
                  <description>1024 us</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>2048us</name>
                  <description>2048 us</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>4096us</name>
                  <description>4096 us</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>8192us</name>
                  <description>8192 us</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>16384us</name>
                  <description>16384 us</description>
                  <value>7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>32ms</name>
                  <description>32768 us</description>
                  <value>8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>65ms</name>
                  <description>65536 us</description>
                  <value>9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>131ms</name>
                  <description>131072 us</description>
                  <value>10</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>SAMPLE</name>
          <description>Motion sample value</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-only</access>
          <dataType>int32_t</dataType>
          <fields>
            <field>
              <name>SAMPLE</name>
              <description>Last motion sample</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>REPORTPER</name>
          <description>Number of samples to be taken before REPORTRDY and DBLRDY events can be generated</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REPORTPER</name>
              <description>Specifies the number of samples to be accumulated in the ACC register before the REPORTRDY and DBLRDY events can be generated</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>10Smpl</name>
                  <description>10 samples / report</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>40Smpl</name>
                  <description>40 samples / report</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>80Smpl</name>
                  <description>80 samples / report</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>120Smpl</name>
                  <description>120 samples / report</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>160Smpl</name>
                  <description>160 samples / report</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>200Smpl</name>
                  <description>200 samples / report</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>240Smpl</name>
                  <description>240 samples / report</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>280Smpl</name>
                  <description>280 samples / report</description>
                  <value>7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1Smpl</name>
                  <description>1 sample / report</description>
                  <value>8</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ACC</name>
          <description>Register accumulating the valid transitions</description>
          <addressOffset>0x514</addressOffset>
          <access>read-only</access>
          <dataType>int32_t</dataType>
          <fields>
            <field>
              <name>ACC</name>
              <description>Register accumulating all valid samples (not double transition) read from the SAMPLE register</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ACCREAD</name>
          <description>Snapshot of the ACC register, updated by the READCLRACC or RDCLRACC task</description>
          <addressOffset>0x518</addressOffset>
          <access>read-only</access>
          <dataType>int32_t</dataType>
          <fields>
            <field>
              <name>ACCREAD</name>
              <description>Snapshot of the ACC register.</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <addressOffset>0x51C</addressOffset>
          <register>
            <name>LED</name>
            <description>Pin select for LED signal</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>A</name>
            <description>Pin select for A signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>B</name>
            <description>Pin select for B signal</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>DBFEN</name>
          <description>Enable input debounce filters</description>
          <addressOffset>0x528</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DBFEN</name>
              <description>Enable input debounce filters</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Debounce input filters disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Debounce input filters enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LEDPRE</name>
          <description>Time period the LED is switched ON prior to sampling</description>
          <addressOffset>0x540</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000010</resetValue>
          <fields>
            <field>
              <name>LEDPRE</name>
              <description>Period in us the LED is switched on prior to sampling</description>
              <lsb>0</lsb>
              <msb>8</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ACCDBL</name>
          <description>Register accumulating the number of detected double transitions</description>
          <addressOffset>0x544</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>ACCDBL</name>
              <description>Register accumulating the number of detected double or illegal transitions. ( SAMPLE = 2 ).</description>
              <lsb>0</lsb>
              <msb>3</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ACCDBLREAD</name>
          <description>Snapshot of the ACCDBL, updated by the READCLRACC or RDCLRDBL task</description>
          <addressOffset>0x548</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>ACCDBLREAD</name>
              <description>Snapshot of the ACCDBL register. This field is updated when the READCLRACC or RDCLRDBL task is triggered.</description>
              <lsb>0</lsb>
              <msb>3</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>COMP</name>
      <description>Comparator</description>
      <groupName>COMP</groupName>
      <baseAddress>0x40013000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>COMP_LPCOMP</name>
        <value>19</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start comparator</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop comparator</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_SAMPLE</name>
          <description>Sample comparator value</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_READY</name>
          <description>COMP is ready and output is valid</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_DOWN</name>
          <description>Downward crossing</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_UP</name>
          <description>Upward crossing</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_CROSS</name>
          <description>Downward or upward crossing</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY_SAMPLE</name>
              <description>Shortcut between READY event and SAMPLE task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>READY_STOP</name>
              <description>Shortcut between READY event and STOP task</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DOWN_STOP</name>
              <description>Shortcut between DOWN event and STOP task</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>UP_STOP</name>
              <description>Shortcut between UP event and STOP task</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CROSS_STOP</name>
              <description>Shortcut between CROSS event and STOP task</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Enable or disable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DOWN</name>
              <description>Enable or disable interrupt for DOWN event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>UP</name>
              <description>Enable or disable interrupt for UP event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CROSS</name>
              <description>Enable or disable interrupt for CROSS event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to Enable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DOWN</name>
              <description>Write '1' to Enable interrupt for DOWN event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>UP</name>
              <description>Write '1' to Enable interrupt for UP event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CROSS</name>
              <description>Write '1' to Enable interrupt for CROSS event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to Disable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DOWN</name>
              <description>Write '1' to Disable interrupt for DOWN event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>UP</name>
              <description>Write '1' to Disable interrupt for UP event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CROSS</name>
              <description>Write '1' to Disable interrupt for CROSS event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RESULT</name>
          <description>Compare result</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>RESULT</name>
              <description>Result of last compare. Decision point SAMPLE task.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Below</name>
                  <description>Input voltage is below the threshold (VIN+ &amp;lt; VIN-)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Above</name>
                  <description>Input voltage is above the threshold (VIN+ &amp;gt; VIN-)</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>COMP enable</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable COMP</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PSEL</name>
          <description>Pin select</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PSEL</name>
              <description>Analog pin select</description>
              <lsb>0</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AnalogInput0</name>
                  <description>AIN0 selected as analog input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput1</name>
                  <description>AIN1 selected as analog input</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput2</name>
                  <description>AIN2 selected as analog input</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput3</name>
                  <description>AIN3 selected as analog input</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput4</name>
                  <description>AIN4 selected as analog input</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput5</name>
                  <description>AIN5 selected as analog input</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput6</name>
                  <description>AIN6 selected as analog input</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput7</name>
                  <description>AIN7 selected as analog input</description>
                  <value>7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>REFSEL</name>
          <description>Reference source select for single-ended mode</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000004</resetValue>
          <fields>
            <field>
              <name>REFSEL</name>
              <description>Reference select</description>
              <lsb>0</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Int1V2</name>
                  <description>VREF = internal 1.2 V reference (VDD &amp;gt;= 1.7 V)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Int1V8</name>
                  <description>VREF = internal 1.8 V reference (VDD &amp;gt;= VREF + 0.2 V)</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Int2V4</name>
                  <description>VREF = internal 2.4 V reference (VDD &amp;gt;= VREF + 0.2 V)</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>VDD</name>
                  <description>VREF = VDD</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ARef</name>
                  <description>VREF = AREF (VDD &amp;gt;= VREF &amp;gt;= AREFMIN)</description>
                  <value>7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>EXTREFSEL</name>
          <description>External reference select</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EXTREFSEL</name>
              <description>External analog reference select</description>
              <lsb>0</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AnalogReference0</name>
                  <description>Use AIN0 as external analog reference</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference1</name>
                  <description>Use AIN1 as external analog reference</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference2</name>
                  <description>Use AIN2 as external analog reference</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference3</name>
                  <description>Use AIN3 as external analog reference</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference4</name>
                  <description>Use AIN4 as external analog reference</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference5</name>
                  <description>Use AIN5 as external analog reference</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference6</name>
                  <description>Use AIN6 as external analog reference</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference7</name>
                  <description>Use AIN7 as external analog reference</description>
                  <value>7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>TH</name>
          <description>Threshold configuration for hysteresis unit</description>
          <addressOffset>0x530</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>THDOWN</name>
              <description>VDOWN = (THDOWN+1)/64*VREF</description>
              <lsb>0</lsb>
              <msb>5</msb>
            </field>
            <field>
              <name>THUP</name>
              <description>VUP = (THUP+1)/64*VREF</description>
              <lsb>8</lsb>
              <msb>13</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE</name>
          <description>Mode configuration</description>
          <addressOffset>0x534</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SP</name>
              <description>Speed and power modes</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Low-power mode</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Normal</name>
                  <description>Normal mode</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>High-speed mode</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MAIN</name>
              <description>Main operation modes</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>SE</name>
                  <description>Single-ended mode</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Diff</name>
                  <description>Differential mode</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>HYST</name>
          <description>Comparator hysteresis enable</description>
          <addressOffset>0x538</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>HYST</name>
              <description>Comparator hysteresis</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NoHyst</name>
                  <description>Comparator hysteresis disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Hyst50mV</name>
                  <description>Comparator hysteresis enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ISOURCE</name>
          <description>Current source select on analog input</description>
          <addressOffset>0x53C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ISOURCE</name>
              <description>Comparator hysteresis</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Off</name>
                  <description>Current source disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ien2mA5</name>
                  <description>Current source enabled (+/- 2.5 uA)</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ien5mA</name>
                  <description>Current source enabled (+/- 5 uA)</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ien10mA</name>
                  <description>Current source enabled (+/- 10 uA)</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>LPCOMP</name>
      <description>Low Power Comparator</description>
      <groupName>LPCOMP</groupName>
      <baseAddress>0x40013000</baseAddress>
      <size>32</size>
      <alternatePeripheral>COMP</alternatePeripheral>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>COMP_LPCOMP</name>
        <value>19</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Start comparator</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stop comparator</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_SAMPLE</name>
          <description>Sample comparator value</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_READY</name>
          <description>LPCOMP is ready and output is valid</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_DOWN</name>
          <description>Downward crossing</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_UP</name>
          <description>Upward crossing</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_CROSS</name>
          <description>Downward or upward crossing</description>
          <addressOffset>0x10C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY_SAMPLE</name>
              <description>Shortcut between READY event and SAMPLE task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>READY_STOP</name>
              <description>Shortcut between READY event and STOP task</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DOWN_STOP</name>
              <description>Shortcut between DOWN event and STOP task</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>UP_STOP</name>
              <description>Shortcut between UP event and STOP task</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CROSS_STOP</name>
              <description>Shortcut between CROSS event and STOP task</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to Enable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DOWN</name>
              <description>Write '1' to Enable interrupt for DOWN event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>UP</name>
              <description>Write '1' to Enable interrupt for UP event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CROSS</name>
              <description>Write '1' to Enable interrupt for CROSS event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>READY</name>
              <description>Write '1' to Disable interrupt for READY event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DOWN</name>
              <description>Write '1' to Disable interrupt for DOWN event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>UP</name>
              <description>Write '1' to Disable interrupt for UP event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CROSS</name>
              <description>Write '1' to Disable interrupt for CROSS event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>RESULT</name>
          <description>Compare result</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>RESULT</name>
              <description>Result of last compare. Decision point SAMPLE task.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Below</name>
                  <description>Input voltage is below the reference threshold (VIN+ &amp;lt; VIN-).</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Above</name>
                  <description>Input voltage is above the reference threshold (VIN+ &amp;gt; VIN-).</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable LPCOMP</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable LPCOMP</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PSEL</name>
          <description>Input pin select</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PSEL</name>
              <description>Analog pin select</description>
              <lsb>0</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AnalogInput0</name>
                  <description>AIN0 selected as analog input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput1</name>
                  <description>AIN1 selected as analog input</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput2</name>
                  <description>AIN2 selected as analog input</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput3</name>
                  <description>AIN3 selected as analog input</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput4</name>
                  <description>AIN4 selected as analog input</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput5</name>
                  <description>AIN5 selected as analog input</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput6</name>
                  <description>AIN6 selected as analog input</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogInput7</name>
                  <description>AIN7 selected as analog input</description>
                  <value>7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>REFSEL</name>
          <description>Reference select</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000004</resetValue>
          <fields>
            <field>
              <name>REFSEL</name>
              <description>Reference select</description>
              <lsb>0</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Ref1_8Vdd</name>
                  <description>VDD * 1/8 selected as reference</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref2_8Vdd</name>
                  <description>VDD * 2/8 selected as reference</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref3_8Vdd</name>
                  <description>VDD * 3/8 selected as reference</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref4_8Vdd</name>
                  <description>VDD * 4/8 selected as reference</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref5_8Vdd</name>
                  <description>VDD * 5/8 selected as reference</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref6_8Vdd</name>
                  <description>VDD * 6/8 selected as reference</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref7_8Vdd</name>
                  <description>VDD * 7/8 selected as reference</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>ARef</name>
                  <description>External analog reference selected</description>
                  <value>7</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref1_16Vdd</name>
                  <description>VDD * 1/16 selected as reference</description>
                  <value>8</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref3_16Vdd</name>
                  <description>VDD * 3/16 selected as reference</description>
                  <value>9</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref5_16Vdd</name>
                  <description>VDD * 5/16 selected as reference</description>
                  <value>10</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref7_16Vdd</name>
                  <description>VDD * 7/16 selected as reference</description>
                  <value>11</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref9_16Vdd</name>
                  <description>VDD * 9/16 selected as reference</description>
                  <value>12</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref11_16Vdd</name>
                  <description>VDD * 11/16 selected as reference</description>
                  <value>13</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref13_16Vdd</name>
                  <description>VDD * 13/16 selected as reference</description>
                  <value>14</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ref15_16Vdd</name>
                  <description>VDD * 15/16 selected as reference</description>
                  <value>15</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>EXTREFSEL</name>
          <description>External reference select</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>EXTREFSEL</name>
              <description>External analog reference select</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>AnalogReference0</name>
                  <description>Use AIN0 as external analog reference</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>AnalogReference1</name>
                  <description>Use AIN1 as external analog reference</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ANADETECT</name>
          <description>Analog detect configuration</description>
          <addressOffset>0x520</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ANADETECT</name>
              <description>Analog detect configuration</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Cross</name>
                  <description>Generate ANADETECT on crossing, both upward crossing and downward crossing</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Up</name>
                  <description>Generate ANADETECT on upward crossing only</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Down</name>
                  <description>Generate ANADETECT on downward crossing only</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>HYST</name>
          <description>Comparator hysteresis enable</description>
          <addressOffset>0x538</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>HYST</name>
              <description>Comparator hysteresis enable</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NoHyst</name>
                  <description>Comparator hysteresis disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Hyst50mV</name>
                  <description>Comparator hysteresis disabled (typ. 50 mV)</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>SWI0</name>
      <description>Software interrupt 0</description>
      <groupName>SWI</groupName>
      <baseAddress>0x40014000</baseAddress>
      <size>32</size>
      <headerStructName>SWI</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SWI0_EGU0</name>
        <value>20</value>
      </interrupt>
      <registers>
        <register>
          <name>UNUSED</name>
          <description>Unused.</description>
          <addressOffset>0x000</addressOffset>
          <resetValue>0x00000000</resetValue>
          <access>read-only</access>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>EGU0</name>
      <description>Event Generator Unit 0</description>
      <groupName>EGU</groupName>
      <baseAddress>0x40014000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SWI0</alternatePeripheral>
      <headerStructName>EGU</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>SWI0_EGU0</name>
        <value>20</value>
      </interrupt>
      <registers>
        <register>
          <dim>16</dim>
          <dimIncrement>4</dimIncrement>
          <name>TASKS_TRIGGER[%s]</name>
          <description>Description collection[0]:  Trigger 0 for triggering the corresponding TRIGGERED[0] event</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <dim>16</dim>
          <dimIncrement>4</dimIncrement>
          <name>EVENTS_TRIGGERED[%s]</name>
          <description>Description collection[0]:  Event number 0 generated by triggering the corresponding TRIGGER[0] task</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TRIGGERED0</name>
              <description>Enable or disable interrupt for TRIGGERED[0] event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED1</name>
              <description>Enable or disable interrupt for TRIGGERED[1] event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED2</name>
              <description>Enable or disable interrupt for TRIGGERED[2] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED3</name>
              <description>Enable or disable interrupt for TRIGGERED[3] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED4</name>
              <description>Enable or disable interrupt for TRIGGERED[4] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED5</name>
              <description>Enable or disable interrupt for TRIGGERED[5] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED6</name>
              <description>Enable or disable interrupt for TRIGGERED[6] event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED7</name>
              <description>Enable or disable interrupt for TRIGGERED[7] event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED8</name>
              <description>Enable or disable interrupt for TRIGGERED[8] event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED9</name>
              <description>Enable or disable interrupt for TRIGGERED[9] event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED10</name>
              <description>Enable or disable interrupt for TRIGGERED[10] event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED11</name>
              <description>Enable or disable interrupt for TRIGGERED[11] event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED12</name>
              <description>Enable or disable interrupt for TRIGGERED[12] event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED13</name>
              <description>Enable or disable interrupt for TRIGGERED[13] event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED14</name>
              <description>Enable or disable interrupt for TRIGGERED[14] event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED15</name>
              <description>Enable or disable interrupt for TRIGGERED[15] event</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TRIGGERED0</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[0] event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED1</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[1] event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED2</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[2] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED3</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[3] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED4</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[4] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED5</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[5] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED6</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[6] event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED7</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[7] event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED8</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[8] event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED9</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[9] event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED10</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[10] event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED11</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[11] event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED12</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[12] event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED13</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[13] event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED14</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[14] event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED15</name>
              <description>Write '1' to Enable interrupt for TRIGGERED[15] event</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>TRIGGERED0</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[0] event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED1</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[1] event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED2</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[2] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED3</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[3] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED4</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[4] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED5</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[5] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED6</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[6] event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED7</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[7] event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED8</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[8] event</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED9</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[9] event</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED10</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[10] event</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED11</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[11] event</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED12</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[12] event</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED13</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[13] event</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED14</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[14] event</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TRIGGERED15</name>
              <description>Write '1' to Disable interrupt for TRIGGERED[15] event</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral derivedFrom="SWI0">
      <name>SWI1</name>
      <description>Software interrupt 1</description>
      <groupName>SWI</groupName>
      <baseAddress>0x40015000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>SWI1_EGU1</name>
        <value>21</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="EGU0">
      <name>EGU1</name>
      <description>Event Generator Unit 1</description>
      <groupName>EGU</groupName>
      <baseAddress>0x40015000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SWI1</alternatePeripheral>
      <interrupt>
        <name>SWI1_EGU1</name>
        <value>21</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SWI0">
      <name>SWI2</name>
      <description>Software interrupt 2</description>
      <groupName>SWI</groupName>
      <baseAddress>0x40016000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>SWI2_EGU2</name>
        <value>22</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="EGU0">
      <name>EGU2</name>
      <description>Event Generator Unit 2</description>
      <groupName>EGU</groupName>
      <baseAddress>0x40016000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SWI2</alternatePeripheral>
      <interrupt>
        <name>SWI2_EGU2</name>
        <value>22</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SWI0">
      <name>SWI3</name>
      <description>Software interrupt 3</description>
      <groupName>SWI</groupName>
      <baseAddress>0x40017000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>SWI3_EGU3</name>
        <value>23</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="EGU0">
      <name>EGU3</name>
      <description>Event Generator Unit 3</description>
      <groupName>EGU</groupName>
      <baseAddress>0x40017000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SWI3</alternatePeripheral>
      <interrupt>
        <name>SWI3_EGU3</name>
        <value>23</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SWI0">
      <name>SWI4</name>
      <description>Software interrupt 4</description>
      <groupName>SWI</groupName>
      <baseAddress>0x40018000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>SWI4_EGU4</name>
        <value>24</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="EGU0">
      <name>EGU4</name>
      <description>Event Generator Unit 4</description>
      <groupName>EGU</groupName>
      <baseAddress>0x40018000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SWI4</alternatePeripheral>
      <interrupt>
        <name>SWI4_EGU4</name>
        <value>24</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SWI0">
      <name>SWI5</name>
      <description>Software interrupt 5</description>
      <groupName>SWI</groupName>
      <baseAddress>0x40019000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>SWI5_EGU5</name>
        <value>25</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="EGU0">
      <name>EGU5</name>
      <description>Event Generator Unit 5</description>
      <groupName>EGU</groupName>
      <baseAddress>0x40019000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SWI5</alternatePeripheral>
      <interrupt>
        <name>SWI5_EGU5</name>
        <value>25</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="TIMER0">
      <name>TIMER3</name>
      <description>Timer/Counter 3</description>
      <groupName>TIMER</groupName>
      <baseAddress>0x4001A000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>TIMER3</name>
        <value>26</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="TIMER0">
      <name>TIMER4</name>
      <description>Timer/Counter 4</description>
      <groupName>TIMER</groupName>
      <baseAddress>0x4001B000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>TIMER4</name>
        <value>27</value>
      </interrupt>
    </peripheral>
    <peripheral>
      <name>PWM0</name>
      <description>Pulse Width Modulation Unit 0</description>
      <groupName>PWM</groupName>
      <baseAddress>0x4001C000</baseAddress>
      <size>32</size>
      <headerStructName>PWM</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>PWM0</name>
        <value>28</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_STOP</name>
          <description>Stops PWM pulse generation on all channels at the end of current PWM period, and stops sequence playback</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <name>TASKS_SEQSTART[%s]</name>
          <description>Description collection[0]:  Loads the first PWM value on all enabled channels from sequence 0, and starts playing that sequence at the rate defined in SEQ[0]REFRESH and/or DECODER.MODE. Causes PWM generation to start it was not running.</description>
          <addressOffset>0x008</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_NEXTSTEP</name>
          <description>Steps by one value in the current sequence on all enabled channels if DECODER.MODE=NextStep. Does not cause PWM generation to start it was not running.</description>
          <addressOffset>0x010</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>Response to STOP task, emitted when PWM pulses are no longer generated</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <name>EVENTS_SEQSTARTED[%s]</name>
          <description>Description collection[0]:  First PWM period started on sequence 0</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <dim>2</dim>
          <dimIncrement>4</dimIncrement>
          <name>EVENTS_SEQEND[%s]</name>
          <description>Description collection[0]:  Emitted at end of every sequence 0, when last value from RAM has been applied to wave counter</description>
          <addressOffset>0x110</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_PWMPERIODEND</name>
          <description>Emitted at the end of each PWM period</description>
          <addressOffset>0x118</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_LOOPSDONE</name>
          <description>Concatenated sequences have been played the amount of times defined in LOOP.CNT</description>
          <addressOffset>0x11C</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>SHORTS</name>
          <description>Shortcut register</description>
          <addressOffset>0x200</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>SEQEND0_STOP</name>
              <description>Shortcut between SEQEND[0] event and STOP task</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND1_STOP</name>
              <description>Shortcut between SEQEND[1] event and STOP task</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOOPSDONE_SEQSTART0</name>
              <description>Shortcut between LOOPSDONE event and SEQSTART[0] task</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOOPSDONE_SEQSTART1</name>
              <description>Shortcut between LOOPSDONE event and SEQSTART[1] task</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOOPSDONE_STOP</name>
              <description>Shortcut between LOOPSDONE event and STOP task</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable shortcut</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable shortcut</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Enable or disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQSTARTED0</name>
              <description>Enable or disable interrupt for SEQSTARTED[0] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQSTARTED1</name>
              <description>Enable or disable interrupt for SEQSTARTED[1] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND0</name>
              <description>Enable or disable interrupt for SEQEND[0] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND1</name>
              <description>Enable or disable interrupt for SEQEND[1] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PWMPERIODEND</name>
              <description>Enable or disable interrupt for PWMPERIODEND event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOOPSDONE</name>
              <description>Enable or disable interrupt for LOOPSDONE event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Enable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQSTARTED0</name>
              <description>Write '1' to Enable interrupt for SEQSTARTED[0] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQSTARTED1</name>
              <description>Write '1' to Enable interrupt for SEQSTARTED[1] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND0</name>
              <description>Write '1' to Enable interrupt for SEQEND[0] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND1</name>
              <description>Write '1' to Enable interrupt for SEQEND[1] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PWMPERIODEND</name>
              <description>Write '1' to Enable interrupt for PWMPERIODEND event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOOPSDONE</name>
              <description>Write '1' to Enable interrupt for LOOPSDONE event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQSTARTED0</name>
              <description>Write '1' to Disable interrupt for SEQSTARTED[0] event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQSTARTED1</name>
              <description>Write '1' to Disable interrupt for SEQSTARTED[1] event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND0</name>
              <description>Write '1' to Disable interrupt for SEQEND[0] event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SEQEND1</name>
              <description>Write '1' to Disable interrupt for SEQEND[1] event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PWMPERIODEND</name>
              <description>Write '1' to Disable interrupt for PWMPERIODEND event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>LOOPSDONE</name>
              <description>Write '1' to Disable interrupt for LOOPSDONE event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>PWM module enable register</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable PWM module</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE</name>
          <description>Selects operating mode of the wave counter</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>UPDOWN</name>
              <description>Selects up or up and down as wave counter mode</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Up</name>
                  <description>Up counter - edge aligned PWM duty-cycle</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>UpAndDown</name>
                  <description>Up and down counter - center aligned PWM duty cycle</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>COUNTERTOP</name>
          <description>Value up to which the pulse generator counter counts</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0x000003FF</resetValue>
          <fields>
            <field>
              <name>COUNTERTOP</name>
              <description>Value up to which the pulse generator counter counts. This register is ignored when DECODER.MODE=WaveForm and only values from RAM will be used.</description>
              <lsb>0</lsb>
              <msb>14</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>PRESCALER</name>
          <description>Configuration for PWM_CLK</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>PRESCALER</name>
              <description>Pre-scaler of PWM_CLK</description>
              <lsb>0</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>DIV_1</name>
                  <description>Divide by   1 (16MHz)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_2</name>
                  <description>Divide by   2 ( 8MHz)</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_4</name>
                  <description>Divide by   4 ( 4MHz)</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_8</name>
                  <description>Divide by   8 ( 2MHz)</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_16</name>
                  <description>Divide by  16 ( 1MHz)</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_32</name>
                  <description>Divide by  32 ( 500kHz)</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_64</name>
                  <description>Divide by  64 ( 250kHz)</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DIV_128</name>
                  <description>Divide by 128 ( 125kHz)</description>
                  <value>7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DECODER</name>
          <description>Configuration of the decoder</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>LOAD</name>
              <description>How a sequence is read from RAM and spread to the compare register</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Common</name>
                  <description>1st half word (16-bit) used in all PWM channels 0..3</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Grouped</name>
                  <description>1st half word (16-bit) used in channel 0..1; 2nd word in channel 2..3</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Individual</name>
                  <description>1st half word (16-bit) in ch.0; 2nd in ch.1; ...; 4th in ch.3</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>WaveForm</name>
                  <description>1st half word (16-bit) in ch.0; 2nd in ch.1; ...; 4th in COUNTERTOP</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>MODE</name>
              <description>Selects source for advancing the active sequence</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>RefreshCount</name>
                  <description>SEQ[n].REFRESH is used to determine loading internal compare registers</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>NextStep</name>
                  <description>NEXTSTEP task causes a new value to be loaded to internal compare registers</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LOOP</name>
          <description>Amount of playback of a loop</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CNT</name>
              <description>Amount of playback of pattern cycles</description>
              <lsb>0</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Looping disabled (stop at the end of the sequence)</description>
                  <value>0</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <dim>2</dim>
          <dimIncrement>32</dimIncrement>
          <name>SEQ[%s]</name>
          <description>Unspecified</description>
          <headerStructName>PWM_SEQ</headerStructName>
          <addressOffset>0x520</addressOffset>
          <register>
            <name>PTR</name>
            <description>Description cluster[0]:  Beginning address in Data RAM of this sequence</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>PTR</name>
                <description>Beginning address in Data RAM of this sequence</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>CNT</name>
            <description>Description cluster[0]:  Amount of values (duty cycles) in this sequence</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>CNT</name>
                <description>Amount of values (duty cycles) in this sequence</description>
                <lsb>0</lsb>
                <msb>14</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Sequence is disabled, and shall not be started as it is empty</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>REFRESH</name>
            <description>Description cluster[0]:  Amount of additional PWM periods between samples loaded into compare register</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000001</resetValue>
            <fields>
              <field>
                <name>CNT</name>
                <description>Amount of additional PWM periods between samples loaded into compare register (load every REFRESH.CNT+1 PWM periods)</description>
                <lsb>0</lsb>
                <msb>23</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Continuous</name>
                    <description>Update every PWM period</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>ENDDELAY</name>
            <description>Description cluster[0]:  Time added after the sequence</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>CNT</name>
                <description>Time added after the sequence in PWM periods</description>
                <lsb>0</lsb>
                <msb>23</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <headerStructName>PWM_PSEL</headerStructName>
          <addressOffset>0x560</addressOffset>
          <register>
            <dim>4</dim>
            <dimIncrement>4</dimIncrement>
            <name>OUT[%s]</name>
            <description>Description collection[0]:  Output pin select for PWM channel 0</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral>
      <name>PDM</name>
      <description>Pulse Density Modulation (Digital Microphone) Interface</description>
      <groupName>PDM</groupName>
      <baseAddress>0x4001D000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>PDM</name>
        <value>29</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Starts continuous PDM transfer</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stops PDM transfer</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_STARTED</name>
          <description>PDM transfer has started</description>
          <addressOffset>0x100</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>PDM transfer has finished</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_END</name>
          <description>The PDM has written the last sample specified by SAMPLE.MAXCNT (or the last sample after a STOP task has been received) to Data RAM</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STARTED</name>
              <description>Enable or disable interrupt for STARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Enable or disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Enable or disable interrupt for END event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STARTED</name>
              <description>Write '1' to Enable interrupt for STARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Enable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to Enable interrupt for END event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>STARTED</name>
              <description>Write '1' to Disable interrupt for STARTED event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Disable interrupt for STOPPED event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>END</name>
              <description>Write '1' to Disable interrupt for END event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>PDM module enable register</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable or disable PDM module</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>PDMCLKCTRL</name>
          <description>PDM clock generator control</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <resetValue>0x08400000</resetValue>
          <fields>
            <field>
              <name>FREQ</name>
              <description>PDM_CLK frequency</description>
              <lsb>0</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>1000K</name>
                  <description>PDM_CLK = 32 MHz / 32 = 1.000 MHz</description>
                  <value>0x08000000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Default</name>
                  <description>PDM_CLK = 32 MHz / 31 = 1.032 MHz</description>
                  <value>0x08400000</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>1067K</name>
                  <description>PDM_CLK = 32 MHz / 30 = 1.067 MHz</description>
                  <value>0x08800000</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>MODE</name>
          <description>Defines the routing of the connected PDM microphones' signals</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>OPERATION</name>
              <description>Mono or stereo operation</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Stereo</name>
                  <description>Sample and store one pair (Left + Right) of 16bit samples per RAM word R=[31:16]; L=[15:0]</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Mono</name>
                  <description>Sample and store two successive Left samples (16 bit each) per RAM word L1=[31:16]; L0=[15:0]</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>EDGE</name>
              <description>Defines on which PDM_CLK edge Left (or mono) is sampled</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>LeftFalling</name>
                  <description>Left (or mono) is sampled on falling edge of PDM_CLK</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LeftRising</name>
                  <description>Left (or mono) is sampled on rising edge of PDM_CLK</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>GAINL</name>
          <description>Left output gain adjustment</description>
          <addressOffset>0x518</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000028</resetValue>
          <fields>
            <field>
              <name>GAINL</name>
              <description>Left output gain adjustment, in 0.5 dB steps, around the default module gain (see electrical parameters) 0x00    -20 dB gain adjust 0x01  -19.5 dB gain adjust (...) 0x27   -0.5 dB gain adjust 0x28      0 dB gain adjust 0x29   +0.5 dB gain adjust (...) 0x4F  +19.5 dB gain adjust 0x50    +20 dB gain adjust</description>
              <lsb>0</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MinGain</name>
                  <description>-20dB gain adjustment (minimum)</description>
                  <value>0x00</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DefaultGain</name>
                  <description>0dB gain adjustment ('2500 RMS' requirement)</description>
                  <value>0x28</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MaxGain</name>
                  <description>+20dB gain adjustment (maximum)</description>
                  <value>0x50</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>GAINR</name>
          <description>Right output gain adjustment</description>
          <addressOffset>0x51C</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000028</resetValue>
          <fields>
            <field>
              <name>GAINR</name>
              <description>Right output gain adjustment, in 0.5 dB steps, around the default module gain (see electrical parameters)</description>
              <lsb>0</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>MinGain</name>
                  <description>-20dB gain adjustment (minimum)</description>
                  <value>0x00</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>DefaultGain</name>
                  <description>0dB gain adjustment ('2500 RMS' requirement)</description>
                  <value>0x28</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>MaxGain</name>
                  <description>+20dB gain adjustment (maximum)</description>
                  <value>0x50</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <addressOffset>0x540</addressOffset>
          <register>
            <name>CLK</name>
            <description>Pin number configuration for PDM CLK signal</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>DIN</name>
            <description>Pin number configuration for PDM DIN signal</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>SAMPLE</name>
          <description>Unspecified</description>
          <addressOffset>0x560</addressOffset>
          <register>
            <name>PTR</name>
            <description>RAM address pointer to write samples to with EasyDMA</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>SAMPLEPTR</name>
                <description>Address to write PDM samples to over DMA</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>MAXCNT</name>
            <description>Number of samples to allocate memory for in EasyDMA mode</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>BUFFSIZE</name>
                <description>Length of DMA RAM allocation in number of samples</description>
                <lsb>0</lsb>
                <msb>14</msb>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral>
      <name>NVMC</name>
      <description>Non Volatile Memory Controller</description>
      <groupName>NVMC</groupName>
      <baseAddress>0x4001E000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>READY</name>
          <description>Ready flag</description>
          <addressOffset>0x400</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>READY</name>
              <description>NVMC is ready or busy</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Busy</name>
                  <description>NVMC is busy (on-going write or erase operation)</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Ready</name>
                  <description>NVMC is ready</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CONFIG</name>
          <description>Configuration register</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>WEN</name>
              <description>Program memory access mode. It is strongly recommended to only activate erase and write modes when they are actively used. Enabling write or erase will invalidate the cache and keep it invalidated.</description>
              <lsb>0</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Ren</name>
                  <description>Read only access</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Wen</name>
                  <description>Write Enabled</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Een</name>
                  <description>Erase enabled</description>
                  <value>2</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERASEPAGE</name>
          <description>Register for erasing a page in Code area</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ERASEPAGE</name>
              <description>Register for starting erase of a page in Code area</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ERASEPCR1</name>
          <description>Deprecated register -  Register for erasing a page in Code area. Equivalent to ERASEPAGE.</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <alternateRegister>ERASEPAGE</alternateRegister>
          <fields>
            <field>
              <name>ERASEPCR1</name>
              <description>Register for erasing a page in Code area. Equivalent to ERASEPAGE.</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ERASEALL</name>
          <description>Register for erasing all non-volatile user memory</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ERASEALL</name>
              <description>Erase all non-volatile memory including UICR registers. Note that code erase has to be enabled by CONFIG.EEN before the UICR can be erased.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NoOperation</name>
                  <description>No operation</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Erase</name>
                  <description>Start chip erase</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ERASEPCR0</name>
          <description>Deprecated register -  Register for erasing a page in Code area. Equivalent to ERASEPAGE.</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ERASEPCR0</name>
              <description>Register for starting erase of a page in Code area. Equivalent to ERASEPAGE.</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>ERASEUICR</name>
          <description>Register for erasing User Information Configuration Registers</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>ERASEUICR</name>
              <description>Register starting erase of all User Information Configuration Registers. Note that code erase has to be enabled by CONFIG.EEN before the UICR can be erased.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NoOperation</name>
                  <description>No operation</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Erase</name>
                  <description>Start erase of UICR</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ICACHECNF</name>
          <description>I-Code cache configuration register.</description>
          <addressOffset>0x540</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>CACHEEN</name>
              <description>Cache enable</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable cache. Invalidates all cache entries.</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable cache</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CACHEPROFEN</name>
              <description>Cache profiling enable</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable cache profiling</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable cache profiling</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>IHIT</name>
          <description>I-Code cache hit counter.</description>
          <addressOffset>0x548</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>HITS</name>
              <description>Number of cache hits</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
        <register>
          <name>IMISS</name>
          <description>I-Code cache miss counter.</description>
          <addressOffset>0x54C</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>MISSES</name>
              <description>Number of cache misses</description>
              <lsb>0</lsb>
              <msb>31</msb>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>PPI</name>
      <description>Programmable Peripheral Interconnect</description>
      <groupName>PPI</groupName>
      <baseAddress>0x4001F000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <cluster>
          <dim>6</dim>
          <dimIncrement>8</dimIncrement>
          <name>TASKS_CHG[%s]</name>
          <description>Channel group tasks</description>
          <addressOffset>0x000</addressOffset>
          <register>
            <name>EN</name>
            <description>Description cluster[0]:  Enable channel group 0</description>
            <addressOffset>0x000</addressOffset>
            <access>write-only</access>
          </register>
          <register>
            <name>DIS</name>
            <description>Description cluster[0]:  Disable channel group 0</description>
            <addressOffset>0x004</addressOffset>
            <access>write-only</access>
          </register>
        </cluster>
        <register>
          <name>CHEN</name>
          <description>Channel enable register</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CH0</name>
              <description>Enable or disable channel 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1</name>
              <description>Enable or disable channel 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2</name>
              <description>Enable or disable channel 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3</name>
              <description>Enable or disable channel 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4</name>
              <description>Enable or disable channel 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5</name>
              <description>Enable or disable channel 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6</name>
              <description>Enable or disable channel 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7</name>
              <description>Enable or disable channel 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH8</name>
              <description>Enable or disable channel 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH9</name>
              <description>Enable or disable channel 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH10</name>
              <description>Enable or disable channel 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH11</name>
              <description>Enable or disable channel 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH12</name>
              <description>Enable or disable channel 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH13</name>
              <description>Enable or disable channel 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH14</name>
              <description>Enable or disable channel 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH15</name>
              <description>Enable or disable channel 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH16</name>
              <description>Enable or disable channel 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH17</name>
              <description>Enable or disable channel 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH18</name>
              <description>Enable or disable channel 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH19</name>
              <description>Enable or disable channel 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH20</name>
              <description>Enable or disable channel 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH21</name>
              <description>Enable or disable channel 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH22</name>
              <description>Enable or disable channel 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH23</name>
              <description>Enable or disable channel 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH24</name>
              <description>Enable or disable channel 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH25</name>
              <description>Enable or disable channel 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH26</name>
              <description>Enable or disable channel 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH27</name>
              <description>Enable or disable channel 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH28</name>
              <description>Enable or disable channel 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH29</name>
              <description>Enable or disable channel 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH30</name>
              <description>Enable or disable channel 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH31</name>
              <description>Enable or disable channel 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable channel</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CHENSET</name>
          <description>Channel enable set register</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToSet</modifiedWriteValues>
          <fields>
            <field>
              <name>CH0</name>
              <description>Channel 0 enable set register.  Writing '0' has no effect</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel 1 enable set register.  Writing '0' has no effect</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel 2 enable set register.  Writing '0' has no effect</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3</name>
              <description>Channel 3 enable set register.  Writing '0' has no effect</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4</name>
              <description>Channel 4 enable set register.  Writing '0' has no effect</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5</name>
              <description>Channel 5 enable set register.  Writing '0' has no effect</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6</name>
              <description>Channel 6 enable set register.  Writing '0' has no effect</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7</name>
              <description>Channel 7 enable set register.  Writing '0' has no effect</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH8</name>
              <description>Channel 8 enable set register.  Writing '0' has no effect</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH9</name>
              <description>Channel 9 enable set register.  Writing '0' has no effect</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH10</name>
              <description>Channel 10 enable set register.  Writing '0' has no effect</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH11</name>
              <description>Channel 11 enable set register.  Writing '0' has no effect</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH12</name>
              <description>Channel 12 enable set register.  Writing '0' has no effect</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH13</name>
              <description>Channel 13 enable set register.  Writing '0' has no effect</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH14</name>
              <description>Channel 14 enable set register.  Writing '0' has no effect</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH15</name>
              <description>Channel 15 enable set register.  Writing '0' has no effect</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH16</name>
              <description>Channel 16 enable set register.  Writing '0' has no effect</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH17</name>
              <description>Channel 17 enable set register.  Writing '0' has no effect</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH18</name>
              <description>Channel 18 enable set register.  Writing '0' has no effect</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH19</name>
              <description>Channel 19 enable set register.  Writing '0' has no effect</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH20</name>
              <description>Channel 20 enable set register.  Writing '0' has no effect</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH21</name>
              <description>Channel 21 enable set register.  Writing '0' has no effect</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH22</name>
              <description>Channel 22 enable set register.  Writing '0' has no effect</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH23</name>
              <description>Channel 23 enable set register.  Writing '0' has no effect</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH24</name>
              <description>Channel 24 enable set register.  Writing '0' has no effect</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH25</name>
              <description>Channel 25 enable set register.  Writing '0' has no effect</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH26</name>
              <description>Channel 26 enable set register.  Writing '0' has no effect</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH27</name>
              <description>Channel 27 enable set register.  Writing '0' has no effect</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH28</name>
              <description>Channel 28 enable set register.  Writing '0' has no effect</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH29</name>
              <description>Channel 29 enable set register.  Writing '0' has no effect</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH30</name>
              <description>Channel 30 enable set register.  Writing '0' has no effect</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH31</name>
              <description>Channel 31 enable set register.  Writing '0' has no effect</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: Enable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>CHENCLR</name>
          <description>Channel enable clear register</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>CH0</name>
              <description>Channel 0 enable clear register.  Writing '0' has no effect</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1</name>
              <description>Channel 1 enable clear register.  Writing '0' has no effect</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2</name>
              <description>Channel 2 enable clear register.  Writing '0' has no effect</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3</name>
              <description>Channel 3 enable clear register.  Writing '0' has no effect</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4</name>
              <description>Channel 4 enable clear register.  Writing '0' has no effect</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5</name>
              <description>Channel 5 enable clear register.  Writing '0' has no effect</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6</name>
              <description>Channel 6 enable clear register.  Writing '0' has no effect</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7</name>
              <description>Channel 7 enable clear register.  Writing '0' has no effect</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH8</name>
              <description>Channel 8 enable clear register.  Writing '0' has no effect</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH9</name>
              <description>Channel 9 enable clear register.  Writing '0' has no effect</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH10</name>
              <description>Channel 10 enable clear register.  Writing '0' has no effect</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH11</name>
              <description>Channel 11 enable clear register.  Writing '0' has no effect</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH12</name>
              <description>Channel 12 enable clear register.  Writing '0' has no effect</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH13</name>
              <description>Channel 13 enable clear register.  Writing '0' has no effect</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH14</name>
              <description>Channel 14 enable clear register.  Writing '0' has no effect</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH15</name>
              <description>Channel 15 enable clear register.  Writing '0' has no effect</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH16</name>
              <description>Channel 16 enable clear register.  Writing '0' has no effect</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH17</name>
              <description>Channel 17 enable clear register.  Writing '0' has no effect</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH18</name>
              <description>Channel 18 enable clear register.  Writing '0' has no effect</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH19</name>
              <description>Channel 19 enable clear register.  Writing '0' has no effect</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH20</name>
              <description>Channel 20 enable clear register.  Writing '0' has no effect</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH21</name>
              <description>Channel 21 enable clear register.  Writing '0' has no effect</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH22</name>
              <description>Channel 22 enable clear register.  Writing '0' has no effect</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH23</name>
              <description>Channel 23 enable clear register.  Writing '0' has no effect</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH24</name>
              <description>Channel 24 enable clear register.  Writing '0' has no effect</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH25</name>
              <description>Channel 25 enable clear register.  Writing '0' has no effect</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH26</name>
              <description>Channel 26 enable clear register.  Writing '0' has no effect</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH27</name>
              <description>Channel 27 enable clear register.  Writing '0' has no effect</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH28</name>
              <description>Channel 28 enable clear register.  Writing '0' has no effect</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH29</name>
              <description>Channel 29 enable clear register.  Writing '0' has no effect</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH30</name>
              <description>Channel 30 enable clear register.  Writing '0' has no effect</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH31</name>
              <description>Channel 31 enable clear register.  Writing '0' has no effect</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: channel disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: channel enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: disable channel</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <dim>20</dim>
          <dimIncrement>8</dimIncrement>
          <name>CH[%s]</name>
          <description>PPI Channel</description>
          <addressOffset>0x510</addressOffset>
          <register>
            <name>EEP</name>
            <description>Description cluster[0]:  Channel 0 event end-point</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>EEP</name>
                <description>Pointer to event register. Accepts only addresses to registers from the Event group.</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>TEP</name>
            <description>Description cluster[0]:  Channel 0 task end-point</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>TEP</name>
                <description>Pointer to task register. Accepts only addresses to registers from the Task group.</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <dim>6</dim>
          <dimIncrement>4</dimIncrement>
          <name>CHG[%s]</name>
          <description>Description collection[0]:  Channel group 0</description>
          <addressOffset>0x800</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>CH0</name>
              <description>Include or exclude channel 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH1</name>
              <description>Include or exclude channel 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH2</name>
              <description>Include or exclude channel 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH3</name>
              <description>Include or exclude channel 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH4</name>
              <description>Include or exclude channel 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH5</name>
              <description>Include or exclude channel 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH6</name>
              <description>Include or exclude channel 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH7</name>
              <description>Include or exclude channel 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH8</name>
              <description>Include or exclude channel 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH9</name>
              <description>Include or exclude channel 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH10</name>
              <description>Include or exclude channel 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH11</name>
              <description>Include or exclude channel 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH12</name>
              <description>Include or exclude channel 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH13</name>
              <description>Include or exclude channel 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH14</name>
              <description>Include or exclude channel 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH15</name>
              <description>Include or exclude channel 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH16</name>
              <description>Include or exclude channel 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH17</name>
              <description>Include or exclude channel 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH18</name>
              <description>Include or exclude channel 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH19</name>
              <description>Include or exclude channel 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH20</name>
              <description>Include or exclude channel 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH21</name>
              <description>Include or exclude channel 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH22</name>
              <description>Include or exclude channel 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH23</name>
              <description>Include or exclude channel 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH24</name>
              <description>Include or exclude channel 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH25</name>
              <description>Include or exclude channel 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH26</name>
              <description>Include or exclude channel 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH27</name>
              <description>Include or exclude channel 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH28</name>
              <description>Include or exclude channel 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH29</name>
              <description>Include or exclude channel 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH30</name>
              <description>Include or exclude channel 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>CH31</name>
              <description>Include or exclude channel 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Excluded</name>
                  <description>Exclude</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Included</name>
                  <description>Include</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <dim>32</dim>
          <dimIncrement>4</dimIncrement>
          <name>FORK[%s]</name>
          <description>Fork</description>
          <addressOffset>0x910</addressOffset>
          <register>
            <name>TEP</name>
            <description>Description cluster[0]:  Channel 0 task end-point</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>TEP</name>
                <description>Pointer to task register</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral>
      <name>MWU</name>
      <description>Memory Watch Unit</description>
      <groupName>MWU</groupName>
      <baseAddress>0x40020000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>MWU</name>
        <value>32</value>
      </interrupt>
      <registers>
        <cluster>
          <dim>4</dim>
          <dimIncrement>8</dimIncrement>
          <name>EVENTS_REGION[%s]</name>
          <description>Unspecified</description>
          <addressOffset>0x100</addressOffset>
          <register>
            <name>WA</name>
            <description>Description cluster[0]:  Write access to region 0 detected</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
          </register>
          <register>
            <name>RA</name>
            <description>Description cluster[0]:  Read access to region 0 detected</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
          </register>
        </cluster>
        <cluster>
          <dim>2</dim>
          <dimIncrement>8</dimIncrement>
          <name>EVENTS_PREGION[%s]</name>
          <description>Unspecified</description>
          <addressOffset>0x160</addressOffset>
          <register>
            <name>WA</name>
            <description>Description cluster[0]:  Write access to peripheral region 0 detected</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
          </register>
          <register>
            <name>RA</name>
            <description>Description cluster[0]:  Read access to peripheral region 0 detected</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
          </register>
        </cluster>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REGION0WA</name>
              <description>Enable or disable interrupt for REGION[0].WA event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION0RA</name>
              <description>Enable or disable interrupt for REGION[0].RA event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1WA</name>
              <description>Enable or disable interrupt for REGION[1].WA event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1RA</name>
              <description>Enable or disable interrupt for REGION[1].RA event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2WA</name>
              <description>Enable or disable interrupt for REGION[2].WA event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2RA</name>
              <description>Enable or disable interrupt for REGION[2].RA event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3WA</name>
              <description>Enable or disable interrupt for REGION[3].WA event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3RA</name>
              <description>Enable or disable interrupt for REGION[3].RA event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION0WA</name>
              <description>Enable or disable interrupt for PREGION[0].WA event</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION0RA</name>
              <description>Enable or disable interrupt for PREGION[0].RA event</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION1WA</name>
              <description>Enable or disable interrupt for PREGION[1].WA event</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION1RA</name>
              <description>Enable or disable interrupt for PREGION[1].RA event</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REGION0WA</name>
              <description>Write '1' to Enable interrupt for REGION[0].WA event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION0RA</name>
              <description>Write '1' to Enable interrupt for REGION[0].RA event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1WA</name>
              <description>Write '1' to Enable interrupt for REGION[1].WA event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1RA</name>
              <description>Write '1' to Enable interrupt for REGION[1].RA event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2WA</name>
              <description>Write '1' to Enable interrupt for REGION[2].WA event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2RA</name>
              <description>Write '1' to Enable interrupt for REGION[2].RA event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3WA</name>
              <description>Write '1' to Enable interrupt for REGION[3].WA event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3RA</name>
              <description>Write '1' to Enable interrupt for REGION[3].RA event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION0WA</name>
              <description>Write '1' to Enable interrupt for PREGION[0].WA event</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION0RA</name>
              <description>Write '1' to Enable interrupt for PREGION[0].RA event</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION1WA</name>
              <description>Write '1' to Enable interrupt for PREGION[1].WA event</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION1RA</name>
              <description>Write '1' to Enable interrupt for PREGION[1].RA event</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REGION0WA</name>
              <description>Write '1' to Disable interrupt for REGION[0].WA event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION0RA</name>
              <description>Write '1' to Disable interrupt for REGION[0].RA event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1WA</name>
              <description>Write '1' to Disable interrupt for REGION[1].WA event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1RA</name>
              <description>Write '1' to Disable interrupt for REGION[1].RA event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2WA</name>
              <description>Write '1' to Disable interrupt for REGION[2].WA event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2RA</name>
              <description>Write '1' to Disable interrupt for REGION[2].RA event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3WA</name>
              <description>Write '1' to Disable interrupt for REGION[3].WA event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3RA</name>
              <description>Write '1' to Disable interrupt for REGION[3].RA event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION0WA</name>
              <description>Write '1' to Disable interrupt for PREGION[0].WA event</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION0RA</name>
              <description>Write '1' to Disable interrupt for PREGION[0].RA event</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION1WA</name>
              <description>Write '1' to Disable interrupt for PREGION[1].WA event</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION1RA</name>
              <description>Write '1' to Disable interrupt for PREGION[1].RA event</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>NMIEN</name>
          <description>Enable or disable non-maskable interrupt</description>
          <addressOffset>0x320</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REGION0WA</name>
              <description>Enable or disable non-maskable interrupt for REGION[0].WA event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION0RA</name>
              <description>Enable or disable non-maskable interrupt for REGION[0].RA event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1WA</name>
              <description>Enable or disable non-maskable interrupt for REGION[1].WA event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1RA</name>
              <description>Enable or disable non-maskable interrupt for REGION[1].RA event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2WA</name>
              <description>Enable or disable non-maskable interrupt for REGION[2].WA event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2RA</name>
              <description>Enable or disable non-maskable interrupt for REGION[2].RA event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3WA</name>
              <description>Enable or disable non-maskable interrupt for REGION[3].WA event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3RA</name>
              <description>Enable or disable non-maskable interrupt for REGION[3].RA event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION0WA</name>
              <description>Enable or disable non-maskable interrupt for PREGION[0].WA event</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION0RA</name>
              <description>Enable or disable non-maskable interrupt for PREGION[0].RA event</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION1WA</name>
              <description>Enable or disable non-maskable interrupt for PREGION[1].WA event</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION1RA</name>
              <description>Enable or disable non-maskable interrupt for PREGION[1].RA event</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>NMIENSET</name>
          <description>Enable non-maskable interrupt</description>
          <addressOffset>0x324</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REGION0WA</name>
              <description>Write '1' to Enable non-maskable interrupt for REGION[0].WA event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION0RA</name>
              <description>Write '1' to Enable non-maskable interrupt for REGION[0].RA event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1WA</name>
              <description>Write '1' to Enable non-maskable interrupt for REGION[1].WA event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1RA</name>
              <description>Write '1' to Enable non-maskable interrupt for REGION[1].RA event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2WA</name>
              <description>Write '1' to Enable non-maskable interrupt for REGION[2].WA event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2RA</name>
              <description>Write '1' to Enable non-maskable interrupt for REGION[2].RA event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3WA</name>
              <description>Write '1' to Enable non-maskable interrupt for REGION[3].WA event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3RA</name>
              <description>Write '1' to Enable non-maskable interrupt for REGION[3].RA event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION0WA</name>
              <description>Write '1' to Enable non-maskable interrupt for PREGION[0].WA event</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION0RA</name>
              <description>Write '1' to Enable non-maskable interrupt for PREGION[0].RA event</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION1WA</name>
              <description>Write '1' to Enable non-maskable interrupt for PREGION[1].WA event</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION1RA</name>
              <description>Write '1' to Enable non-maskable interrupt for PREGION[1].RA event</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>NMIENCLR</name>
          <description>Disable non-maskable interrupt</description>
          <addressOffset>0x328</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>REGION0WA</name>
              <description>Write '1' to Disable non-maskable interrupt for REGION[0].WA event</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION0RA</name>
              <description>Write '1' to Disable non-maskable interrupt for REGION[0].RA event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1WA</name>
              <description>Write '1' to Disable non-maskable interrupt for REGION[1].WA event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION1RA</name>
              <description>Write '1' to Disable non-maskable interrupt for REGION[1].RA event</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2WA</name>
              <description>Write '1' to Disable non-maskable interrupt for REGION[2].WA event</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION2RA</name>
              <description>Write '1' to Disable non-maskable interrupt for REGION[2].RA event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3WA</name>
              <description>Write '1' to Disable non-maskable interrupt for REGION[3].WA event</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>REGION3RA</name>
              <description>Write '1' to Disable non-maskable interrupt for REGION[3].RA event</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION0WA</name>
              <description>Write '1' to Disable non-maskable interrupt for PREGION[0].WA event</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION0RA</name>
              <description>Write '1' to Disable non-maskable interrupt for PREGION[0].RA event</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION1WA</name>
              <description>Write '1' to Disable non-maskable interrupt for PREGION[1].WA event</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PREGION1RA</name>
              <description>Write '1' to Disable non-maskable interrupt for PREGION[1].RA event</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <dim>2</dim>
          <dimIncrement>8</dimIncrement>
          <name>PERREGION[%s]</name>
          <description>Unspecified</description>
          <addressOffset>0x400</addressOffset>
          <register>
            <name>SUBSTATWA</name>
            <description>Description cluster[0]:  Source of event/interrupt in region 0, write access detected while corresponding subregion was enabled for watching</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <modifiedWriteValues>oneToClear</modifiedWriteValues>
            <fields>
              <field>
                <name>SR0</name>
                <description>Subregion 0 in region 0 (write '1' to clear)</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR1</name>
                <description>Subregion 1 in region 0 (write '1' to clear)</description>
                <lsb>1</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR2</name>
                <description>Subregion 2 in region 0 (write '1' to clear)</description>
                <lsb>2</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR3</name>
                <description>Subregion 3 in region 0 (write '1' to clear)</description>
                <lsb>3</lsb>
                <msb>3</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR4</name>
                <description>Subregion 4 in region 0 (write '1' to clear)</description>
                <lsb>4</lsb>
                <msb>4</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR5</name>
                <description>Subregion 5 in region 0 (write '1' to clear)</description>
                <lsb>5</lsb>
                <msb>5</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR6</name>
                <description>Subregion 6 in region 0 (write '1' to clear)</description>
                <lsb>6</lsb>
                <msb>6</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR7</name>
                <description>Subregion 7 in region 0 (write '1' to clear)</description>
                <lsb>7</lsb>
                <msb>7</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR8</name>
                <description>Subregion 8 in region 0 (write '1' to clear)</description>
                <lsb>8</lsb>
                <msb>8</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR9</name>
                <description>Subregion 9 in region 0 (write '1' to clear)</description>
                <lsb>9</lsb>
                <msb>9</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR10</name>
                <description>Subregion 10 in region 0 (write '1' to clear)</description>
                <lsb>10</lsb>
                <msb>10</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR11</name>
                <description>Subregion 11 in region 0 (write '1' to clear)</description>
                <lsb>11</lsb>
                <msb>11</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR12</name>
                <description>Subregion 12 in region 0 (write '1' to clear)</description>
                <lsb>12</lsb>
                <msb>12</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR13</name>
                <description>Subregion 13 in region 0 (write '1' to clear)</description>
                <lsb>13</lsb>
                <msb>13</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR14</name>
                <description>Subregion 14 in region 0 (write '1' to clear)</description>
                <lsb>14</lsb>
                <msb>14</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR15</name>
                <description>Subregion 15 in region 0 (write '1' to clear)</description>
                <lsb>15</lsb>
                <msb>15</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR16</name>
                <description>Subregion 16 in region 0 (write '1' to clear)</description>
                <lsb>16</lsb>
                <msb>16</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR17</name>
                <description>Subregion 17 in region 0 (write '1' to clear)</description>
                <lsb>17</lsb>
                <msb>17</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR18</name>
                <description>Subregion 18 in region 0 (write '1' to clear)</description>
                <lsb>18</lsb>
                <msb>18</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR19</name>
                <description>Subregion 19 in region 0 (write '1' to clear)</description>
                <lsb>19</lsb>
                <msb>19</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR20</name>
                <description>Subregion 20 in region 0 (write '1' to clear)</description>
                <lsb>20</lsb>
                <msb>20</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR21</name>
                <description>Subregion 21 in region 0 (write '1' to clear)</description>
                <lsb>21</lsb>
                <msb>21</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR22</name>
                <description>Subregion 22 in region 0 (write '1' to clear)</description>
                <lsb>22</lsb>
                <msb>22</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR23</name>
                <description>Subregion 23 in region 0 (write '1' to clear)</description>
                <lsb>23</lsb>
                <msb>23</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR24</name>
                <description>Subregion 24 in region 0 (write '1' to clear)</description>
                <lsb>24</lsb>
                <msb>24</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR25</name>
                <description>Subregion 25 in region 0 (write '1' to clear)</description>
                <lsb>25</lsb>
                <msb>25</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR26</name>
                <description>Subregion 26 in region 0 (write '1' to clear)</description>
                <lsb>26</lsb>
                <msb>26</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR27</name>
                <description>Subregion 27 in region 0 (write '1' to clear)</description>
                <lsb>27</lsb>
                <msb>27</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR28</name>
                <description>Subregion 28 in region 0 (write '1' to clear)</description>
                <lsb>28</lsb>
                <msb>28</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR29</name>
                <description>Subregion 29 in region 0 (write '1' to clear)</description>
                <lsb>29</lsb>
                <msb>29</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR30</name>
                <description>Subregion 30 in region 0 (write '1' to clear)</description>
                <lsb>30</lsb>
                <msb>30</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR31</name>
                <description>Subregion 31 in region 0 (write '1' to clear)</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No write access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Write access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>SUBSTATRA</name>
            <description>Description cluster[0]:  Source of event/interrupt in region 0, read access detected while corresponding subregion was enabled for watching</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <modifiedWriteValues>oneToClear</modifiedWriteValues>
            <fields>
              <field>
                <name>SR0</name>
                <description>Subregion 0 in region 0 (write '1' to clear)</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR1</name>
                <description>Subregion 1 in region 0 (write '1' to clear)</description>
                <lsb>1</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR2</name>
                <description>Subregion 2 in region 0 (write '1' to clear)</description>
                <lsb>2</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR3</name>
                <description>Subregion 3 in region 0 (write '1' to clear)</description>
                <lsb>3</lsb>
                <msb>3</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR4</name>
                <description>Subregion 4 in region 0 (write '1' to clear)</description>
                <lsb>4</lsb>
                <msb>4</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR5</name>
                <description>Subregion 5 in region 0 (write '1' to clear)</description>
                <lsb>5</lsb>
                <msb>5</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR6</name>
                <description>Subregion 6 in region 0 (write '1' to clear)</description>
                <lsb>6</lsb>
                <msb>6</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR7</name>
                <description>Subregion 7 in region 0 (write '1' to clear)</description>
                <lsb>7</lsb>
                <msb>7</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR8</name>
                <description>Subregion 8 in region 0 (write '1' to clear)</description>
                <lsb>8</lsb>
                <msb>8</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR9</name>
                <description>Subregion 9 in region 0 (write '1' to clear)</description>
                <lsb>9</lsb>
                <msb>9</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR10</name>
                <description>Subregion 10 in region 0 (write '1' to clear)</description>
                <lsb>10</lsb>
                <msb>10</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR11</name>
                <description>Subregion 11 in region 0 (write '1' to clear)</description>
                <lsb>11</lsb>
                <msb>11</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR12</name>
                <description>Subregion 12 in region 0 (write '1' to clear)</description>
                <lsb>12</lsb>
                <msb>12</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR13</name>
                <description>Subregion 13 in region 0 (write '1' to clear)</description>
                <lsb>13</lsb>
                <msb>13</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR14</name>
                <description>Subregion 14 in region 0 (write '1' to clear)</description>
                <lsb>14</lsb>
                <msb>14</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR15</name>
                <description>Subregion 15 in region 0 (write '1' to clear)</description>
                <lsb>15</lsb>
                <msb>15</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR16</name>
                <description>Subregion 16 in region 0 (write '1' to clear)</description>
                <lsb>16</lsb>
                <msb>16</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR17</name>
                <description>Subregion 17 in region 0 (write '1' to clear)</description>
                <lsb>17</lsb>
                <msb>17</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR18</name>
                <description>Subregion 18 in region 0 (write '1' to clear)</description>
                <lsb>18</lsb>
                <msb>18</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR19</name>
                <description>Subregion 19 in region 0 (write '1' to clear)</description>
                <lsb>19</lsb>
                <msb>19</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR20</name>
                <description>Subregion 20 in region 0 (write '1' to clear)</description>
                <lsb>20</lsb>
                <msb>20</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR21</name>
                <description>Subregion 21 in region 0 (write '1' to clear)</description>
                <lsb>21</lsb>
                <msb>21</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR22</name>
                <description>Subregion 22 in region 0 (write '1' to clear)</description>
                <lsb>22</lsb>
                <msb>22</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR23</name>
                <description>Subregion 23 in region 0 (write '1' to clear)</description>
                <lsb>23</lsb>
                <msb>23</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR24</name>
                <description>Subregion 24 in region 0 (write '1' to clear)</description>
                <lsb>24</lsb>
                <msb>24</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR25</name>
                <description>Subregion 25 in region 0 (write '1' to clear)</description>
                <lsb>25</lsb>
                <msb>25</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR26</name>
                <description>Subregion 26 in region 0 (write '1' to clear)</description>
                <lsb>26</lsb>
                <msb>26</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR27</name>
                <description>Subregion 27 in region 0 (write '1' to clear)</description>
                <lsb>27</lsb>
                <msb>27</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR28</name>
                <description>Subregion 28 in region 0 (write '1' to clear)</description>
                <lsb>28</lsb>
                <msb>28</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR29</name>
                <description>Subregion 29 in region 0 (write '1' to clear)</description>
                <lsb>29</lsb>
                <msb>29</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR30</name>
                <description>Subregion 30 in region 0 (write '1' to clear)</description>
                <lsb>30</lsb>
                <msb>30</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR31</name>
                <description>Subregion 31 in region 0 (write '1' to clear)</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>NoAccess</name>
                    <description>No read access occurred in this subregion</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Access</name>
                    <description>Read access(es) occurred in this subregion</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <register>
          <name>REGIONEN</name>
          <description>Enable/disable regions watch</description>
          <addressOffset>0x510</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>RGN0WA</name>
              <description>Enable/disable write access watch in region[0]</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disable</name>
                  <description>Disable write access watch in this region</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Enable write access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN0RA</name>
              <description>Enable/disable read access watch in region[0]</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disable</name>
                  <description>Disable read access watch in this region</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Enable read access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN1WA</name>
              <description>Enable/disable write access watch in region[1]</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disable</name>
                  <description>Disable write access watch in this region</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Enable write access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN1RA</name>
              <description>Enable/disable read access watch in region[1]</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disable</name>
                  <description>Disable read access watch in this region</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Enable read access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN2WA</name>
              <description>Enable/disable write access watch in region[2]</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disable</name>
                  <description>Disable write access watch in this region</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Enable write access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN2RA</name>
              <description>Enable/disable read access watch in region[2]</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disable</name>
                  <description>Disable read access watch in this region</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Enable read access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN3WA</name>
              <description>Enable/disable write access watch in region[3]</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disable</name>
                  <description>Disable write access watch in this region</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Enable write access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN3RA</name>
              <description>Enable/disable read access watch in region[3]</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disable</name>
                  <description>Disable read access watch in this region</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Enable read access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRGN0WA</name>
              <description>Enable/disable write access watch in PREGION[0]</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disable</name>
                  <description>Disable write access watch in this PREGION</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Enable write access watch in this PREGION</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRGN0RA</name>
              <description>Enable/disable read access watch in PREGION[0]</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disable</name>
                  <description>Disable read access watch in this PREGION</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Enable read access watch in this PREGION</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRGN1WA</name>
              <description>Enable/disable write access watch in PREGION[1]</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disable</name>
                  <description>Disable write access watch in this PREGION</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Enable write access watch in this PREGION</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRGN1RA</name>
              <description>Enable/disable read access watch in PREGION[1]</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disable</name>
                  <description>Disable read access watch in this PREGION</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enable</name>
                  <description>Enable read access watch in this PREGION</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>REGIONENSET</name>
          <description>Enable regions watch</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>RGN0WA</name>
              <description>Enable write access watch in region[0]</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Write access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Write access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable write access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN0RA</name>
              <description>Enable read access watch in region[0]</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable read access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN1WA</name>
              <description>Enable write access watch in region[1]</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Write access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Write access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable write access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN1RA</name>
              <description>Enable read access watch in region[1]</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable read access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN2WA</name>
              <description>Enable write access watch in region[2]</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Write access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Write access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable write access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN2RA</name>
              <description>Enable read access watch in region[2]</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable read access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN3WA</name>
              <description>Enable write access watch in region[3]</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Write access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Write access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable write access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN3RA</name>
              <description>Enable read access watch in region[3]</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable read access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRGN0WA</name>
              <description>Enable write access watch in PREGION[0]</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Write access watch in this PREGION is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Write access watch in this PREGION is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable write access watch in this PREGION</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRGN0RA</name>
              <description>Enable read access watch in PREGION[0]</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read access watch in this PREGION is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read access watch in this PREGION is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable read access watch in this PREGION</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRGN1WA</name>
              <description>Enable write access watch in PREGION[1]</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Write access watch in this PREGION is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Write access watch in this PREGION is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable write access watch in this PREGION</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRGN1RA</name>
              <description>Enable read access watch in PREGION[1]</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read access watch in this PREGION is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read access watch in this PREGION is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable read access watch in this PREGION</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>REGIONENCLR</name>
          <description>Disable regions watch</description>
          <addressOffset>0x518</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>RGN0WA</name>
              <description>Disable write access watch in region[0]</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Write access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Write access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable write access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN0RA</name>
              <description>Disable read access watch in region[0]</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable read access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN1WA</name>
              <description>Disable write access watch in region[1]</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Write access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Write access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable write access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN1RA</name>
              <description>Disable read access watch in region[1]</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable read access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN2WA</name>
              <description>Disable write access watch in region[2]</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Write access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Write access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable write access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN2RA</name>
              <description>Disable read access watch in region[2]</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable read access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN3WA</name>
              <description>Disable write access watch in region[3]</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Write access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Write access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable write access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>RGN3RA</name>
              <description>Disable read access watch in region[3]</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read access watch in this region is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read access watch in this region is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable read access watch in this region</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRGN0WA</name>
              <description>Disable write access watch in PREGION[0]</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Write access watch in this PREGION is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Write access watch in this PREGION is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable write access watch in this PREGION</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRGN0RA</name>
              <description>Disable read access watch in PREGION[0]</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read access watch in this PREGION is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read access watch in this PREGION is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable read access watch in this PREGION</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRGN1WA</name>
              <description>Disable write access watch in PREGION[1]</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Write access watch in this PREGION is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Write access watch in this PREGION is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable write access watch in this PREGION</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PRGN1RA</name>
              <description>Disable read access watch in PREGION[1]</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read access watch in this PREGION is disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read access watch in this PREGION is enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable read access watch in this PREGION</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <dim>4</dim>
          <dimIncrement>16</dimIncrement>
          <name>REGION[%s]</name>
          <description>Unspecified</description>
          <addressOffset>0x600</addressOffset>
          <register>
            <name>START</name>
            <description>Description cluster[0]:  Start address for region 0</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>START</name>
                <description>Start address for region</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>END</name>
            <description>Description cluster[0]:  End address of region 0</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <fields>
              <field>
                <name>END</name>
                <description>End address of region.</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <dim>2</dim>
          <dimIncrement>16</dimIncrement>
          <name>PREGION[%s]</name>
          <description>Unspecified</description>
          <addressOffset>0x6C0</addressOffset>
          <register>
            <name>START</name>
            <description>Description cluster[0]:  Reserved for future use</description>
            <addressOffset>0x000</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>START</name>
                <description>Reserved for future use</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>END</name>
            <description>Description cluster[0]:  Reserved for future use</description>
            <addressOffset>0x004</addressOffset>
            <access>read-only</access>
            <fields>
              <field>
                <name>END</name>
                <description>Reserved for future use</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
          <register>
            <name>SUBS</name>
            <description>Description cluster[0]:  Subregions of region 0</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>SR0</name>
                <description>Include or exclude subregion 0 in region</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR1</name>
                <description>Include or exclude subregion 1 in region</description>
                <lsb>1</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR2</name>
                <description>Include or exclude subregion 2 in region</description>
                <lsb>2</lsb>
                <msb>2</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR3</name>
                <description>Include or exclude subregion 3 in region</description>
                <lsb>3</lsb>
                <msb>3</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR4</name>
                <description>Include or exclude subregion 4 in region</description>
                <lsb>4</lsb>
                <msb>4</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR5</name>
                <description>Include or exclude subregion 5 in region</description>
                <lsb>5</lsb>
                <msb>5</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR6</name>
                <description>Include or exclude subregion 6 in region</description>
                <lsb>6</lsb>
                <msb>6</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR7</name>
                <description>Include or exclude subregion 7 in region</description>
                <lsb>7</lsb>
                <msb>7</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR8</name>
                <description>Include or exclude subregion 8 in region</description>
                <lsb>8</lsb>
                <msb>8</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR9</name>
                <description>Include or exclude subregion 9 in region</description>
                <lsb>9</lsb>
                <msb>9</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR10</name>
                <description>Include or exclude subregion 10 in region</description>
                <lsb>10</lsb>
                <msb>10</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR11</name>
                <description>Include or exclude subregion 11 in region</description>
                <lsb>11</lsb>
                <msb>11</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR12</name>
                <description>Include or exclude subregion 12 in region</description>
                <lsb>12</lsb>
                <msb>12</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR13</name>
                <description>Include or exclude subregion 13 in region</description>
                <lsb>13</lsb>
                <msb>13</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR14</name>
                <description>Include or exclude subregion 14 in region</description>
                <lsb>14</lsb>
                <msb>14</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR15</name>
                <description>Include or exclude subregion 15 in region</description>
                <lsb>15</lsb>
                <msb>15</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR16</name>
                <description>Include or exclude subregion 16 in region</description>
                <lsb>16</lsb>
                <msb>16</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR17</name>
                <description>Include or exclude subregion 17 in region</description>
                <lsb>17</lsb>
                <msb>17</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR18</name>
                <description>Include or exclude subregion 18 in region</description>
                <lsb>18</lsb>
                <msb>18</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR19</name>
                <description>Include or exclude subregion 19 in region</description>
                <lsb>19</lsb>
                <msb>19</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR20</name>
                <description>Include or exclude subregion 20 in region</description>
                <lsb>20</lsb>
                <msb>20</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR21</name>
                <description>Include or exclude subregion 21 in region</description>
                <lsb>21</lsb>
                <msb>21</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR22</name>
                <description>Include or exclude subregion 22 in region</description>
                <lsb>22</lsb>
                <msb>22</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR23</name>
                <description>Include or exclude subregion 23 in region</description>
                <lsb>23</lsb>
                <msb>23</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR24</name>
                <description>Include or exclude subregion 24 in region</description>
                <lsb>24</lsb>
                <msb>24</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR25</name>
                <description>Include or exclude subregion 25 in region</description>
                <lsb>25</lsb>
                <msb>25</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR26</name>
                <description>Include or exclude subregion 26 in region</description>
                <lsb>26</lsb>
                <msb>26</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR27</name>
                <description>Include or exclude subregion 27 in region</description>
                <lsb>27</lsb>
                <msb>27</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR28</name>
                <description>Include or exclude subregion 28 in region</description>
                <lsb>28</lsb>
                <msb>28</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR29</name>
                <description>Include or exclude subregion 29 in region</description>
                <lsb>29</lsb>
                <msb>29</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR30</name>
                <description>Include or exclude subregion 30 in region</description>
                <lsb>30</lsb>
                <msb>30</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
              <field>
                <name>SR31</name>
                <description>Include or exclude subregion 31 in region</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Exclude</name>
                    <description>Exclude</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Include</name>
                    <description>Include</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral derivedFrom="PWM0">
      <name>PWM1</name>
      <description>Pulse Width Modulation Unit 1</description>
      <groupName>PWM</groupName>
      <baseAddress>0x40021000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>PWM1</name>
        <value>33</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="PWM0">
      <name>PWM2</name>
      <description>Pulse Width Modulation Unit 2</description>
      <groupName>PWM</groupName>
      <baseAddress>0x40022000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>PWM2</name>
        <value>34</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SPIM0">
      <name>SPIM2</name>
      <description>Serial Peripheral Interface Master with EasyDMA 2</description>
      <groupName>SPIM</groupName>
      <baseAddress>0x40023000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>SPIM2_SPIS2_SPI2</name>
        <value>35</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SPIS0">
      <name>SPIS2</name>
      <description>SPI Slave 2</description>
      <groupName>SPIS</groupName>
      <baseAddress>0x40023000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SPIM2</alternatePeripheral>
      <interrupt>
        <name>SPIM2_SPIS2_SPI2</name>
        <value>35</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="SPI0">
      <name>SPI2</name>
      <description>Serial Peripheral Interface 2</description>
      <groupName>SPI</groupName>
      <baseAddress>0x40023000</baseAddress>
      <size>32</size>
      <alternatePeripheral>SPIM2</alternatePeripheral>
      <interrupt>
        <name>SPIM2_SPIS2_SPI2</name>
        <value>35</value>
      </interrupt>
    </peripheral>
    <peripheral derivedFrom="RTC0">
      <name>RTC2</name>
      <description>Real time counter 2</description>
      <groupName>RTC</groupName>
      <baseAddress>0x40024000</baseAddress>
      <size>32</size>
      <interrupt>
        <name>RTC2</name>
        <value>36</value>
      </interrupt>
    </peripheral>
    <peripheral>
      <name>I2S</name>
      <description>Inter-IC Sound</description>
      <groupName>I2S</groupName>
      <baseAddress>0x40025000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>I2S</name>
        <value>37</value>
      </interrupt>
      <registers>
        <register>
          <name>TASKS_START</name>
          <description>Starts continuous I2S transfer. Also starts MCK generator when this is enabled.</description>
          <addressOffset>0x000</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>TASKS_STOP</name>
          <description>Stops I2S transfer. Also stops MCK generator. Triggering this task will cause the {event:STOPPED} event to be generated.</description>
          <addressOffset>0x004</addressOffset>
          <access>write-only</access>
        </register>
        <register>
          <name>EVENTS_RXPTRUPD</name>
          <description>The RXD.PTR register has been copied to internal double-buffers. When the I2S module is started and RX is enabled, this event will be generated for every RXTXD.MAXCNT words that are received on the SDIN pin.</description>
          <addressOffset>0x104</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_STOPPED</name>
          <description>I2S transfer stopped.</description>
          <addressOffset>0x108</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>EVENTS_TXPTRUPD</name>
          <description>The TDX.PTR register has been copied to internal double-buffers. When the I2S module is started and TX is enabled, this event will be generated for every RXTXD.MAXCNT words that are sent on the SDOUT pin.</description>
          <addressOffset>0x114</addressOffset>
          <access>read-write</access>
        </register>
        <register>
          <name>INTEN</name>
          <description>Enable or disable interrupt</description>
          <addressOffset>0x300</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>RXPTRUPD</name>
              <description>Enable or disable interrupt for RXPTRUPD event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Enable or disable interrupt for STOPPED event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXPTRUPD</name>
              <description>Enable or disable interrupt for TXPTRUPD event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENSET</name>
          <description>Enable interrupt</description>
          <addressOffset>0x304</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>RXPTRUPD</name>
              <description>Write '1' to Enable interrupt for RXPTRUPD event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Enable interrupt for STOPPED event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXPTRUPD</name>
              <description>Write '1' to Enable interrupt for TXPTRUPD event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>INTENCLR</name>
          <description>Disable interrupt</description>
          <addressOffset>0x308</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>RXPTRUPD</name>
              <description>Write '1' to Disable interrupt for RXPTRUPD event</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>STOPPED</name>
              <description>Write '1' to Disable interrupt for STOPPED event</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>TXPTRUPD</name>
              <description>Write '1' to Disable interrupt for TXPTRUPD event</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Read: Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Read: Enabled</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Disable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>ENABLE</name>
          <description>Enable I2S module.</description>
          <addressOffset>0x500</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000000</resetValue>
          <fields>
            <field>
              <name>ENABLE</name>
              <description>Enable I2S module.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disable</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Enabled</name>
                  <description>Enable</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <cluster>
          <name>CONFIG</name>
          <description>Unspecified</description>
          <addressOffset>0x504</addressOffset>
          <register>
            <name>MODE</name>
            <description>I2S mode.</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>MODE</name>
                <description>I2S mode.</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Master</name>
                    <description>Master mode. SCK and LRCK generated from internal master clcok (MCK) and output on pins defined by PSEL.xxx.</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Slave</name>
                    <description>Slave mode. SCK and LRCK generated by external master and received on pins defined by PSEL.xxx</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>RXEN</name>
            <description>Reception (RX) enable.</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>RXEN</name>
                <description>Reception (RX) enable.</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Reception disabled and now data will be written to the RXD.PTR address.</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Enabled</name>
                    <description>Reception enabled.</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>TXEN</name>
            <description>Transmission (TX) enable.</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000001</resetValue>
            <fields>
              <field>
                <name>TXEN</name>
                <description>Transmission (TX) enable.</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Transmission disabled and now data will be read from the RXD.TXD address.</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Enabled</name>
                    <description>Transmission enabled.</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>MCKEN</name>
            <description>Master clock generator enable.</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000001</resetValue>
            <fields>
              <field>
                <name>MCKEN</name>
                <description>Master clock generator enable.</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disabled</name>
                    <description>Master clock generator disabled and PSEL.MCK not connected(available as GPIO).</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Enabled</name>
                    <description>Master clock generator running and MCK output on PSEL.MCK.</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>MCKFREQ</name>
            <description>Master clock generator frequency.</description>
            <addressOffset>0x010</addressOffset>
            <access>read-write</access>
            <resetValue>0x20000000</resetValue>
            <fields>
              <field>
                <name>MCKFREQ</name>
                <description>Master clock generator frequency.</description>
                <lsb>0</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>32MDIV2</name>
                    <description>32 MHz / 2 = 16.0 MHz</description>
                    <value>0x80000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV3</name>
                    <description>32 MHz / 3 = 10.6666667 MHz</description>
                    <value>0x50000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV4</name>
                    <description>32 MHz / 4 = 8.0 MHz</description>
                    <value>0x40000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV5</name>
                    <description>32 MHz / 5 = 6.4 MHz</description>
                    <value>0x30000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV6</name>
                    <description>32 MHz / 6 = 5.3333333 MHz</description>
                    <value>0x28000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV8</name>
                    <description>32 MHz / 8 = 4.0 MHz</description>
                    <value>0x20000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV10</name>
                    <description>32 MHz / 10 = 3.2 MHz</description>
                    <value>0x18000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV11</name>
                    <description>32 MHz / 11 = 2.9090909 MHz</description>
                    <value>0x16000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV15</name>
                    <description>32 MHz / 15 = 2.1333333 MHz</description>
                    <value>0x11000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV16</name>
                    <description>32 MHz / 16 = 2.0 MHz</description>
                    <value>0x10000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV21</name>
                    <description>32 MHz / 21 = 1.5238095</description>
                    <value>0x0C000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV23</name>
                    <description>32 MHz / 23 = 1.3913043 MHz</description>
                    <value>0x0B000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV30</name>
                    <description>32 MHz / 30 = 1.0666667 MHz</description>
                    <value>0x08800000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV31</name>
                    <description>32 MHz / 31 = 1.0322581 MHz</description>
                    <value>0x08400000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV32</name>
                    <description>32 MHz / 32 = 1.0 MHz</description>
                    <value>0x08000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV42</name>
                    <description>32 MHz / 42 = 0.7619048 MHz</description>
                    <value>0x06000000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV63</name>
                    <description>32 MHz / 63 = 0.5079365 MHz</description>
                    <value>0x04100000</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>32MDIV125</name>
                    <description>32 MHz / 125 = 0.256 MHz</description>
                    <value>0x020C0000</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>RATIO</name>
            <description>MCK / LRCK ratio.</description>
            <addressOffset>0x014</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000006</resetValue>
            <fields>
              <field>
                <name>RATIO</name>
                <description>MCK / LRCK ratio.</description>
                <lsb>0</lsb>
                <msb>3</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>32X</name>
                    <description>LRCK = MCK / 32</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>48X</name>
                    <description>LRCK = MCK / 48</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>64X</name>
                    <description>LRCK = MCK / 64</description>
                    <value>2</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>96X</name>
                    <description>LRCK = MCK / 96</description>
                    <value>3</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>128X</name>
                    <description>LRCK = MCK / 128</description>
                    <value>4</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>192X</name>
                    <description>LRCK = MCK / 192</description>
                    <value>5</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>256X</name>
                    <description>LRCK = MCK / 256</description>
                    <value>6</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>384X</name>
                    <description>LRCK = MCK / 384</description>
                    <value>7</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>512X</name>
                    <description>LRCK = MCK / 512</description>
                    <value>8</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>SWIDTH</name>
            <description>Sample width.</description>
            <addressOffset>0x018</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000001</resetValue>
            <fields>
              <field>
                <name>SWIDTH</name>
                <description>Sample width.</description>
                <lsb>0</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>8Bit</name>
                    <description>8 bit.</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>16Bit</name>
                    <description>16 bit.</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>24Bit</name>
                    <description>24 bit.</description>
                    <value>2</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>ALIGN</name>
            <description>Alignment of sample within a frame.</description>
            <addressOffset>0x01C</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>ALIGN</name>
                <description>Alignment of sample within a frame.</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Left</name>
                    <description>Left-aligned.</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Right</name>
                    <description>Right-aligned.</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>FORMAT</name>
            <description>Frame format.</description>
            <addressOffset>0x020</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>FORMAT</name>
                <description>Frame format.</description>
                <lsb>0</lsb>
                <msb>0</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>I2S</name>
                    <description>Original I2S format.</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Aligned</name>
                    <description>Alternate (left- or right-aligned) format.</description>
                    <value>1</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>CHANNELS</name>
            <description>Enable channels.</description>
            <addressOffset>0x024</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>CHANNELS</name>
                <description>Enable channels.</description>
                <lsb>0</lsb>
                <msb>1</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Stereo</name>
                    <description>Stereo.</description>
                    <value>0</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Left</name>
                    <description>Left only.</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Right</name>
                    <description>Right only.</description>
                    <value>2</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>RXD</name>
          <description>Unspecified</description>
          <addressOffset>0x538</addressOffset>
          <register>
            <name>PTR</name>
            <description>Receive buffer RAM start address.</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>PTR</name>
                <description>Receive buffer Data RAM start address. When receiving, words containing samples will be written to this address. This address is a word aligned Data RAM address.</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>TXD</name>
          <description>Unspecified</description>
          <addressOffset>0x540</addressOffset>
          <register>
            <name>PTR</name>
            <description>Transmit buffer RAM start address.</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>PTR</name>
                <description>Transmit buffer Data RAM start address. When transmitting, words containing samples will be fetched from this address. This address is a word aligned Data RAM address.</description>
                <lsb>0</lsb>
                <msb>31</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>RXTXD</name>
          <description>Unspecified</description>
          <addressOffset>0x550</addressOffset>
          <register>
            <name>MAXCNT</name>
            <description>Size of RXD and TXD buffers.</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0x00000000</resetValue>
            <fields>
              <field>
                <name>MAXCNT</name>
                <description>Size of RXD and TXD buffers in number of 32 bit words.</description>
                <lsb>0</lsb>
                <msb>13</msb>
              </field>
            </fields>
          </register>
        </cluster>
        <cluster>
          <name>PSEL</name>
          <description>Unspecified</description>
          <addressOffset>0x560</addressOffset>
          <register>
            <name>MCK</name>
            <description>Pin select for MCK signal.</description>
            <addressOffset>0x000</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>SCK</name>
            <description>Pin select for SCK signal.</description>
            <addressOffset>0x004</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>LRCK</name>
            <description>Pin select for LRCK signal.</description>
            <addressOffset>0x008</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>SDIN</name>
            <description>Pin select for SDIN signal.</description>
            <addressOffset>0x00C</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
          <register>
            <name>SDOUT</name>
            <description>Pin select for SDOUT signal.</description>
            <addressOffset>0x010</addressOffset>
            <access>read-write</access>
            <resetValue>0xFFFFFFFF</resetValue>
            <fields>
              <field>
                <name>PIN</name>
                <description>Pin number</description>
                <lsb>0</lsb>
                <msb>4</msb>
              </field>
              <field>
                <name>CONNECT</name>
                <description>Connection</description>
                <lsb>31</lsb>
                <msb>31</msb>
                <enumeratedValues>
                  <enumeratedValue>
                    <name>Disconnected</name>
                    <description>Disconnect</description>
                    <value>1</value>
                  </enumeratedValue>
                  <enumeratedValue>
                    <name>Connected</name>
                    <description>Connect</description>
                    <value>0</value>
                  </enumeratedValue>
                </enumeratedValues>
              </field>
            </fields>
          </register>
        </cluster>
      </registers>
    </peripheral>
    <peripheral>
      <name>FPU</name>
      <description>FPU</description>
      <groupName>FPU</groupName>
      <baseAddress>0x40026000</baseAddress>
      <size>32</size>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <interrupt>
        <name>FPU</name>
        <value>38</value>
      </interrupt>
      <registers>
        <register>
          <name>UNUSED</name>
          <description>Unused.</description>
          <addressOffset>0x000</addressOffset>
          <resetValue>0x00000000</resetValue>
          <access>read-only</access>
        </register>
      </registers>
    </peripheral>
    <peripheral>
      <name>P0</name>
      <description>GPIO Port 1</description>
      <groupName>GPIO</groupName>
      <baseAddress>0x50000000</baseAddress>
      <size>32</size>
      <headerStructName>GPIO</headerStructName>
      <addressBlock>
        <offset>0</offset>
        <size>0x1000</size>
        <usage>registers</usage>
      </addressBlock>
      <registers>
        <register>
          <name>OUT</name>
          <description>Write GPIO port</description>
          <addressOffset>0x504</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>OUTSET</name>
          <description>Set individual bits in GPIO port</description>
          <addressOffset>0x508</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToSet</modifiedWriteValues>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>OUTCLR</name>
          <description>Clear individual bits in GPIO port</description>
          <addressOffset>0x50C</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Read: pin driver is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Read: pin driver is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>IN</name>
          <description>Read GPIO port</description>
          <addressOffset>0x510</addressOffset>
          <access>read-only</access>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Pin input is low</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Pin input is high</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DIR</name>
          <description>Direction of GPIO pins</description>
          <addressOffset>0x514</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DIRSET</name>
          <description>DIR set register</description>
          <addressOffset>0x518</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToSet</modifiedWriteValues>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Set as output pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Set as output pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Set as output pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Set as output pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Set as output pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Set as output pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Set as output pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Set as output pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Set as output pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Set as output pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Set as output pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Set as output pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Set as output pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Set as output pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Set as output pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Set as output pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Set as output pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Set as output pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Set as output pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Set as output pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Set as output pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Set as output pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Set as output pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Set as output pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Set as output pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Set as output pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Set as output pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Set as output pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Set as output pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Set as output pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Set as output pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Set as output pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Set</name>
                  <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DIRCLR</name>
          <description>DIR clear register</description>
          <addressOffset>0x51C</addressOffset>
          <access>read-write</access>
          <modifiedWriteValues>oneToClear</modifiedWriteValues>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Set as input pin 0</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Set as input pin 1</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Set as input pin 2</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Set as input pin 3</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Set as input pin 4</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Set as input pin 5</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Set as input pin 6</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Set as input pin 7</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Set as input pin 8</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Set as input pin 9</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Set as input pin 10</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Set as input pin 11</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Set as input pin 12</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Set as input pin 13</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Set as input pin 14</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Set as input pin 15</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Set as input pin 16</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Set as input pin 17</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Set as input pin 18</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Set as input pin 19</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Set as input pin 20</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Set as input pin 21</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Set as input pin 22</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Set as input pin 23</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Set as input pin 24</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Set as input pin 25</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Set as input pin 26</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Set as input pin 27</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Set as input pin 28</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Set as input pin 29</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Set as input pin 30</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Set as input pin 31</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <usage>read</usage>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Read: pin set as input</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Read: pin set as output</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
              <enumeratedValues>
                <usage>write</usage>
                <enumeratedValue>
                  <name>Clear</name>
                  <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>LATCH</name>
          <description>Latch register indicating what GPIO pins that have met the criteria set in the PIN_CNF[n].SENSE registers</description>
          <addressOffset>0x520</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>PIN0</name>
              <description>Status on whether PIN0 has met criteria set in PIN_CNF0.SENSE register. Write '1' to clear.</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN1</name>
              <description>Status on whether PIN1 has met criteria set in PIN_CNF1.SENSE register. Write '1' to clear.</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN2</name>
              <description>Status on whether PIN2 has met criteria set in PIN_CNF2.SENSE register. Write '1' to clear.</description>
              <lsb>2</lsb>
              <msb>2</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN3</name>
              <description>Status on whether PIN3 has met criteria set in PIN_CNF3.SENSE register. Write '1' to clear.</description>
              <lsb>3</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN4</name>
              <description>Status on whether PIN4 has met criteria set in PIN_CNF4.SENSE register. Write '1' to clear.</description>
              <lsb>4</lsb>
              <msb>4</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN5</name>
              <description>Status on whether PIN5 has met criteria set in PIN_CNF5.SENSE register. Write '1' to clear.</description>
              <lsb>5</lsb>
              <msb>5</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN6</name>
              <description>Status on whether PIN6 has met criteria set in PIN_CNF6.SENSE register. Write '1' to clear.</description>
              <lsb>6</lsb>
              <msb>6</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN7</name>
              <description>Status on whether PIN7 has met criteria set in PIN_CNF7.SENSE register. Write '1' to clear.</description>
              <lsb>7</lsb>
              <msb>7</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN8</name>
              <description>Status on whether PIN8 has met criteria set in PIN_CNF8.SENSE register. Write '1' to clear.</description>
              <lsb>8</lsb>
              <msb>8</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN9</name>
              <description>Status on whether PIN9 has met criteria set in PIN_CNF9.SENSE register. Write '1' to clear.</description>
              <lsb>9</lsb>
              <msb>9</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN10</name>
              <description>Status on whether PIN10 has met criteria set in PIN_CNF10.SENSE register. Write '1' to clear.</description>
              <lsb>10</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN11</name>
              <description>Status on whether PIN11 has met criteria set in PIN_CNF11.SENSE register. Write '1' to clear.</description>
              <lsb>11</lsb>
              <msb>11</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN12</name>
              <description>Status on whether PIN12 has met criteria set in PIN_CNF12.SENSE register. Write '1' to clear.</description>
              <lsb>12</lsb>
              <msb>12</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN13</name>
              <description>Status on whether PIN13 has met criteria set in PIN_CNF13.SENSE register. Write '1' to clear.</description>
              <lsb>13</lsb>
              <msb>13</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN14</name>
              <description>Status on whether PIN14 has met criteria set in PIN_CNF14.SENSE register. Write '1' to clear.</description>
              <lsb>14</lsb>
              <msb>14</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN15</name>
              <description>Status on whether PIN15 has met criteria set in PIN_CNF15.SENSE register. Write '1' to clear.</description>
              <lsb>15</lsb>
              <msb>15</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN16</name>
              <description>Status on whether PIN16 has met criteria set in PIN_CNF16.SENSE register. Write '1' to clear.</description>
              <lsb>16</lsb>
              <msb>16</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN17</name>
              <description>Status on whether PIN17 has met criteria set in PIN_CNF17.SENSE register. Write '1' to clear.</description>
              <lsb>17</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN18</name>
              <description>Status on whether PIN18 has met criteria set in PIN_CNF18.SENSE register. Write '1' to clear.</description>
              <lsb>18</lsb>
              <msb>18</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN19</name>
              <description>Status on whether PIN19 has met criteria set in PIN_CNF19.SENSE register. Write '1' to clear.</description>
              <lsb>19</lsb>
              <msb>19</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN20</name>
              <description>Status on whether PIN20 has met criteria set in PIN_CNF20.SENSE register. Write '1' to clear.</description>
              <lsb>20</lsb>
              <msb>20</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN21</name>
              <description>Status on whether PIN21 has met criteria set in PIN_CNF21.SENSE register. Write '1' to clear.</description>
              <lsb>21</lsb>
              <msb>21</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN22</name>
              <description>Status on whether PIN22 has met criteria set in PIN_CNF22.SENSE register. Write '1' to clear.</description>
              <lsb>22</lsb>
              <msb>22</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN23</name>
              <description>Status on whether PIN23 has met criteria set in PIN_CNF23.SENSE register. Write '1' to clear.</description>
              <lsb>23</lsb>
              <msb>23</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN24</name>
              <description>Status on whether PIN24 has met criteria set in PIN_CNF24.SENSE register. Write '1' to clear.</description>
              <lsb>24</lsb>
              <msb>24</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN25</name>
              <description>Status on whether PIN25 has met criteria set in PIN_CNF25.SENSE register. Write '1' to clear.</description>
              <lsb>25</lsb>
              <msb>25</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN26</name>
              <description>Status on whether PIN26 has met criteria set in PIN_CNF26.SENSE register. Write '1' to clear.</description>
              <lsb>26</lsb>
              <msb>26</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN27</name>
              <description>Status on whether PIN27 has met criteria set in PIN_CNF27.SENSE register. Write '1' to clear.</description>
              <lsb>27</lsb>
              <msb>27</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN28</name>
              <description>Status on whether PIN28 has met criteria set in PIN_CNF28.SENSE register. Write '1' to clear.</description>
              <lsb>28</lsb>
              <msb>28</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN29</name>
              <description>Status on whether PIN29 has met criteria set in PIN_CNF29.SENSE register. Write '1' to clear.</description>
              <lsb>29</lsb>
              <msb>29</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN30</name>
              <description>Status on whether PIN30 has met criteria set in PIN_CNF30.SENSE register. Write '1' to clear.</description>
              <lsb>30</lsb>
              <msb>30</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PIN31</name>
              <description>Status on whether PIN31 has met criteria set in PIN_CNF31.SENSE register. Write '1' to clear.</description>
              <lsb>31</lsb>
              <msb>31</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>NotLatched</name>
                  <description>Criteria has not been met</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Latched</name>
                  <description>Criteria has been met</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <name>DETECTMODE</name>
          <description>Select between default DETECT signal behaviour and LDETECT mode</description>
          <addressOffset>0x524</addressOffset>
          <access>read-write</access>
          <fields>
            <field>
              <name>DETECTMODE</name>
              <description>Select between default DETECT signal behaviour and LDETECT mode</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Default</name>
                  <description>DETECT directly connected to PIN DETECT signals</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>LDETECT</name>
                  <description>Use the latched LDETECT behaviour</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
        <register>
          <dim>32</dim>
          <dimIncrement>4</dimIncrement>
          <name>PIN_CNF[%s]</name>
          <description>Description collection[0]:  Configuration of GPIO pins</description>
          <addressOffset>0x700</addressOffset>
          <access>read-write</access>
          <resetValue>0x00000002</resetValue>
          <fields>
            <field>
              <name>DIR</name>
              <description>Pin direction. Same physical register as DIR register</description>
              <lsb>0</lsb>
              <msb>0</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Input</name>
                  <description>Configure pin as an input pin</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Output</name>
                  <description>Configure pin as an output pin</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>INPUT</name>
              <description>Connect or disconnect input buffer</description>
              <lsb>1</lsb>
              <msb>1</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Connect</name>
                  <description>Connect input buffer</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Disconnect</name>
                  <description>Disconnect input buffer</description>
                  <value>1</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>PULL</name>
              <description>Pull configuration</description>
              <lsb>2</lsb>
              <msb>3</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>No pull</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Pulldown</name>
                  <description>Pull down on pin</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Pullup</name>
                  <description>Pull up on pin</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>DRIVE</name>
              <description>Drive configuration</description>
              <lsb>8</lsb>
              <msb>10</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>S0S1</name>
                  <description>Standard '0', standard '1'</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>H0S1</name>
                  <description>High drive '0', standard '1'</description>
                  <value>1</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>S0H1</name>
                  <description>Standard '0', high drive '1'</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>H0H1</name>
                  <description>High drive '0', high 'drive '1''</description>
                  <value>3</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>D0S1</name>
                  <description>Disconnect '0' standard '1' (normally used for wired-or connections)</description>
                  <value>4</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>D0H1</name>
                  <description>Disconnect '0', high drive '1' (normally used for wired-or connections)</description>
                  <value>5</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>S0D1</name>
                  <description>Standard '0'. disconnect '1' (normally used for wired-and connections)</description>
                  <value>6</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>H0D1</name>
                  <description>High drive '0', disconnect '1' (normally used for wired-and connections)</description>
                  <value>7</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
            <field>
              <name>SENSE</name>
              <description>Pin sensing mechanism</description>
              <lsb>16</lsb>
              <msb>17</msb>
              <enumeratedValues>
                <enumeratedValue>
                  <name>Disabled</name>
                  <description>Disabled</description>
                  <value>0</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>High</name>
                  <description>Sense for high level</description>
                  <value>2</value>
                </enumeratedValue>
                <enumeratedValue>
                  <name>Low</name>
                  <description>Sense for low level</description>
                  <value>3</value>
                </enumeratedValue>
              </enumeratedValues>
            </field>
          </fields>
        </register>
      </registers>
    </peripheral>
  </peripherals>
</device>