| /* ------------------------------------------ |
| * Copyright (c) 2016, Synopsys, Inc. All rights reserved. |
| |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| |
| * 1) Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| |
| * 2) Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation and/or |
| * other materials provided with the distribution. |
| |
| * 3) Neither the name of the Synopsys, Inc., nor the names of its contributors may |
| * be used to endorse or promote products derived from this software without |
| * specific prior written permission. |
| |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * \version 2016.05 |
| * \date 2014-06-20 |
| * \author Wayne Ren(Wei.Ren@synopsys.com) |
| --------------------------------------------- */ |
| |
| /** |
| * \file |
| * \ingroup ARC_HAL_CORE_COMM |
| * \brief header file including common core definitions |
| */ |
| |
| /** |
| * \addtogroup ARC_HAL_CORE_COMM |
| * @{ |
| */ |
| |
| |
| #ifndef _ARC_HAL_CORE_H_ |
| #define _ARC_HAL_CORE_H_ |
| |
| #include "inc/arc/arc_feature_config.h" |
| |
| /** |
| * \name exception number definitions |
| * @{ |
| */ |
| |
| /* ARC exception number */ |
| #define EXC_NO_RESET (0) /*!< reset vector, the entry of power up and reset */ |
| #define EXC_NO_MEM_ERR (1) /*!< external memory bus error */ |
| #define EXC_NO_INS_ERR (2) /*!< illegal instruction or illegal instruction sequence */ |
| #define EXC_NO_MAC_CHK (3) /*!< machine check error */ |
| #define EXC_NO_TLB_MISS_I (4) /*!< instruction TLB missing exception, useless without MMU */ |
| #define EXC_NO_TLB_MISS_D (5) /*!< data TLB missing exception, useless without MMU */ |
| #define EXC_NO_PRO_VIO (6) /*!< protection violation */ |
| #define EXC_NO_PRI_VIO (7) /*!< privilege violation */ |
| #define EXC_NO_SWI (8) /*!< software interrupt */ |
| #define EXC_NO_TRAP (9) /*!< trap */ |
| #define EXC_NO_EXT (10) /*!< extension exception */ |
| #define EXC_NO_DIV_ZER0 (11) /*!< divide by zero */ |
| #define EXC_NO_DC_ERR (12) /*!< data cache consistency error */ |
| #define EXC_NO_MAL_ALIGN (13) /*!< misaligned data access */ |
| #define EXC_NO_RESERVE0 (14) /*!< reserved */ |
| #define EXC_NO_RESERVE1 (15) /*!< reserved */ |
| |
| /* extension interrupts */ |
| #define EXC_NO_16 (16) /*!< interrupt vector 16 */ |
| #define EXC_NO_17 (17) /*!< interrupt vector 17 */ |
| #define EXC_NO_18 (18) /*!< interrupt vector 18 */ |
| #define EXC_NO_19 (19) /*!< interrupt vector 19 */ |
| #define EXC_NO_20 (20) /*!< interrupt vector 20 */ |
| #define EXC_NO_21 (21) /*!< interrupt vector 21 */ |
| #define EXC_NO_22 (22) /*!< interrupt vector 22 */ |
| #define EXC_NO_23 (23) /*!< interrupt vector 23 */ |
| #define EXC_NO_24 (24) /*!< interrupt vector 24 */ |
| #define EXC_NO_25 (25) /*!< interrupt vector 25 */ |
| #define EXC_NO_26 (26) /*!< interrupt vector 26 */ |
| #define EXC_NO_27 (27) /*!< interrupt vector 27 */ |
| #define EXC_NO_28 (28) /*!< interrupt vector 28 */ |
| #define EXC_NO_29 (29) /*!< interrupt vector 29 */ |
| #define EXC_NO_30 (30) /*!< interrupt vector 30 */ |
| #define EXC_NO_31 (31) /*!< interrupt vector 31 */ |
| /* ... ARC supports 255 interrupt vectors at most */ |
| #define EXC_NO_255 (255) /*!< interrupt vector 255 */ |
| |
| /** @} */ |
| |
| /** |
| * \name exception vector offset |
| * @{ |
| */ |
| #define EXC_NO_TO_OFFSET(no) (no << 2) |
| |
| /* ARC exception vector offset */ |
| #define EXC_VECTOR_RESET (0x00) /*!< EXC_NO_RESET offset */ |
| #define EXC_VECTOR_MEM_ERR (0x04) /*!< EXC_NO_MEM_ERR offset */ |
| #define EXC_VECTOR_INS_ERR (0x08) /*!< EXC_NO_INS_ERR offset */ |
| #define EXC_VECTOR_MAC_CHK (0x0c) /*!< EXC_NO_MAC_CHK offset */ |
| #define EXC_VECTOR_TLB_MISS_I (0x10) /*!< EXC_NO_TLB_MISS_I offset */ |
| #define EXC_VECTOR_TLB_MISS_D (0x14) /*!< EXC_NO_TLB_MISS_D offset */ |
| #define EXC_VECTOR_PRO_VIO (0x18) /*!< EXC_NO_PRO_VIO offset */ |
| #define EXC_VECTOR_PRI_VIO (0x1c) /*!< EXC_NO_PRI_VIO offset */ |
| #define EXC_VECTOR_SWI (0x20) /*!< EXC_NO_SWI offset */ |
| #define EXC_VECTOR_TRAP (0x24) /*!< EXC_NO_TRAP offset */ |
| #define EXC_VECTOR_EXT (0x28) /*!< EXC_NO_EXT offset */ |
| #define EXC_VECTOR_DIV_ZER0 (0x2c) /*!< EXC_NO_DIV_ZER0 offset */ |
| #define EXC_VECTOR_DC_ERR (0x30) /*!< EXC_NO_DC_ERR offset */ |
| #define EXC_VECTOR_MAL_ALIGN (0x34) /*!< EXC_NO_MAL_ALIGN offset */ |
| #define EXC_VECTOR_RESERVE0 (0x38) /*!< EXC_NO_RESERVE0 offset */ |
| #define EXC_VECTOR_RESERVE1 (0x3c) /*!< EXC_NO_RESERVE1 offset */ |
| /** @} */ |
| |
| /** |
| * \name build configuration register |
| * @{ |
| */ |
| #define AUX_BCR_VER (0x60) /*!< build configuration register version */ |
| #define AUX_BCR_BTA (0x63) /*!< build configuration for BTA LINK */ |
| #define AUX_BCR_VECBASE (0x68) /*!< build configuration for interrupt vector base */ |
| #define AUX_BCR_MPU (0x6d) /*!< build configuration for memory protection unit */ |
| #define AUX_BCR_RF (0x6e) /*!< build configuration for core registers */ |
| #define AUX_BCR_D_CACHE (0x72) /*!< build configuration for data cache */ |
| #define AUX_BCR_DCCM (0x74) /*!< build configuration for DCCM */ |
| #define AUX_BCR_TIMERS (0x75) /*!< build configuration for processor timers */ |
| #define AUX_BCR_AP (0x76) /*!< build configuration for actionpoints */ |
| #define AUX_BCR_I_CACHE (0x77) /*!< build configuration for instruction cache */ |
| #define AUX_BCR_ICCM (0x78) /*!< build configuration for ICCM */ |
| #define AUX_BCR_DSP (0x7a) /*!< build configuration for DSP */ |
| #define AUX_BCR_MUL (0x7b) /*!< build configuration for multiply */ |
| #define AUX_BCR_SWAP (0x7c) /*!< build configuration for swap */ |
| #define AUX_BCR_NORM (0x7d) /*!< build configuration for normalize */ |
| #define AUX_BCR_MIXMAX (0x7e) /*!< build configuration for MIN/MAX */ |
| #define AUX_BCR_BARREL (0x7f) /*!< build configuration for barrel shift */ |
| #define AUX_BCR_ISA (0xc1) /*!< build configuration for ISA configuration */ |
| #define AUX_BCR_STACK (0xc5) /*!< build configuration for stack region */ |
| #define AUX_BCR_ERP (0xc7) /*!< build configuration for error protection */ |
| #define AUX_BCR_FPU (0xc8) /*!< build configuration for floating-point unit */ |
| #define AUX_BCR_CPORT (0xc9) /*!< build configuration for code protection */ |
| #define AUX_BCR_BS (0xcb) /*!< build configuration for bitstream */ |
| #define AUX_BCR_AGU (0xcc) /*!< build configuration for address generate unit */ |
| #define AUX_BCR_DMAC (0xcd) /*!< build configuration for DMA */ |
| #define AUX_BCR_CONNECT_SYSTEM (0xd0) /*!< build configuration for arc connect */ |
| #define AUX_BCR_CONNECT_SEMA (0xd1) /*!< build configuration for inter-core semaphore */ |
| #define AUX_BCR_CONNECT_MESSAGE (0xd2) /*!< build configuration for inter-code message */ |
| #define AUX_BCR_CONNECT_PMU (0xd3) /*!< build configuration for power management unit */ |
| #define AUX_BCR_CONNECT_GFRC (0xd6) /*!< build configuration for global free running counter */ |
| #define AUX_BCR_CAL_STORE (0xd9) /*!< build configuration for calibration parameter storage */ |
| #define AUX_BCR_CONNECT_ICI (0xe0) /*!< build configuration for inter-core interrupt unit */ |
| #define AUX_BCR_CONNECT_ICD (0xe1) /*!< build configuration for inter-core debug unit */ |
| #define AUX_BCR_CONNECT_PDM (0xe3) /*!< build configuration for power domain management unit*/ |
| #define AUX_BCR_RTT (0xf2) /*!< build configuration for real-time trace */ |
| #define AUX_BCR_IRQ (0xf3) /*!< build configuration for interrupt */ |
| #define AUX_BCR_PCT (0xf5) /*!< build configuration for performance counters */ |
| #define AUX_BCR_CC (0xf6) /*!< build configuration for performance counters */ |
| #define AUX_BCR_PDM_DVFS (0xf7) /*!< build configuration for PDM and DVFS */ |
| |
| #define AUX_BCR_SEC_BUILD (0xdb) |
| |
| /* from 0xF5 and 0xF6 */ |
| |
| #define AUX_BCR_IFQUEUE (0xfe) /*!< build configuration for instruction fetch queue */ |
| #define AUX_BCR_SMART (0xff) /*!< build configuration for SmaRT debug feature */ |
| /** @} */ |
| |
| |
| #define AUX_SEC_STAT (0x9) |
| #define AUX_SEC_STAT_BIT_SSC (0) |
| #define AUX_SEC_STAT_BIT_NSRT (1) |
| #define AUX_SEC_STAT_BIT_NSRU (2) |
| #define AUX_SEC_STAT_BIT_IRM (3) |
| #define AUX_SEC_STAT_BIT_SUE (4) |
| #define AUX_SEC_STAT_BIT_NIC (5) |
| |
| /** |
| * \name status register STATUS32 |
| * @{ |
| */ |
| #define AUX_STATUS32 (0xa) |
| #define AUX_STATUS32_P0 (0xb) |
| |
| /* STATUS32 bit-field definition */ |
| #define AUX_STATUS_BIT_AE (5) /*!< processor is in an exception */ |
| #define AUX_STATUS_BIT_DE (6) /*!< delayed branch is pending */ |
| #define AUX_STATUS_BIT_U (7) /*!< user mode */ |
| #define AUX_STATUS_BIT_L (12) /*!< zero-overhead loop enable */ |
| #define AUX_STATUS_BIT_IE (31) /*!< interrupt enable */ |
| |
| /* masks correspond to STATUS32 bit-field */ |
| #define AUX_STATUS_MASK_AE (1<<AUX_STATUS_BIT_AE) /*!< mask of AUX_STATUS_BIT_AE */ |
| #define AUX_STATUS_MASK_DE (1<<AUX_STATUS_BIT_DE) /*!< mask of AUX_STATUS_BIT_DE */ |
| #define AUX_STATUS_MASK_U (1<<AUX_STATUS_BIT_U) /*!< mask of AUX_STATUS_BIT_U */ |
| #define AUX_STATUS_MASK_L (1<<AUX_STATUS_BIT_L) /*!< mask of AUX_STATUS_BIT_L */ |
| #define AUX_STATUS_MASK_IE (1<<AUX_STATUS_BIT_IE) /*!< mask of AUX_STATUS_BIT_IE */ |
| /** @} */ |
| |
| /** |
| * \name zero overhead loop auxiliary register |
| * @{ |
| */ |
| #define AUX_LP_START (0x2) /*!< loop start address (32-bit) */ |
| #define AUX_LP_END (0x3) /*!< loop end address (32-bit) */ |
| /** @} */ |
| |
| #define AUX_USER_SP (0xd) /*!< user-mode stack pointer */ |
| /* added in silverstone */ |
| #define AUX_KERNEL_SP (0x38) /*!< kernel-mode stack pointer */ |
| #define AUX_SEC_U_SP (0x39) /*!< secure user-mode stack pointer */ |
| #define AUX_SEC_K_SP (0x3a) /*!< secure kernel-mode stack pointer */ |
| |
| /* additional stack checkingh registers for secure mode */ |
| #define AUX_S_USTACK_BASE (0x263) |
| #define AUX_S_USTACK_TOP (0x262) |
| |
| #define AUX_S_KSTACK_BASE (0x267) |
| #define AUX_S_KSTACK_TOP (0x266) |
| |
| /** |
| * \name auxiliary register for hardware counter 0 and 1 |
| * @{ |
| */ |
| #define AUX_TIMER0_LIMIT (0x23) /*!< timer 0 limit value */ |
| #define AUX_TIMER0_CTRL (0x22) /*!< timer 0 control value */ |
| #define AUX_TIMER0_CNT (0x21) /*!< timer 0 count value */ |
| #define AUX_TIMER1_LIMIT (0x102) /*!< timer 1 limit value */ |
| #define AUX_TIMER1_CTRL (0x101) /*!< timer 1 control value */ |
| #define AUX_TIMER1_CNT (0x100) /*!< timer 1 count value */ |
| /** @} */ |
| |
| #define AUX_SECURE_TIMER0_CNT (0x106) /*!< secure timer 0 count value */ |
| #define AUX_SECURE_TIMER0_CTRL (0x107) /*!< secure timer 0 control value */ |
| #define AUX_SECURE_TIMER0_LIMIT (0x108) /*!< secure timer 0 limit value */ |
| #define AUX_SECURE_TIMER1_CNT (0x109) /*!< secure timer 1 count value */ |
| #define AUX_SECURE_TIMER1_CTRL (0x10a) /*!< secure timer 1 control value */ |
| #define AUX_SECURE_TIMER1_LIMIT (0x10b) /*!< secure timer 1 limit value */ |
| |
| |
| /** |
| * \name auxiliary register for real-time counter |
| * @{ |
| */ |
| #define AUX_RTC_CTRL (0x103) /*!< real-time counter control register */ |
| #define AUX_RTC_LOW (0x104) /*!< real-time counter count low register */ |
| #define AUX_RTC_HIGH (0x105) /*!< real-time counter count high register */ |
| /** @} */ |
| |
| /** |
| * \name indexed table auxiliary register |
| * @{ |
| */ |
| #define AUX_JLI_BASE (0x290) /*!< jump and link indexed base address */ |
| #define AUX_LDI_BASE (0x291) /*!< load indexed base address */ |
| #define AUX_EI_BASE (0x292) /*!< execute indexed base address */ |
| /** @} */ |
| |
| /** |
| * \name baseline auxiliary register set |
| * @{ |
| */ |
| /* to be added */ |
| #define AUX_ERRET (0x400) /*!< exception return address */ |
| #define AUX_ERBTA (0x401) /*!< BTA saved on exception entry */ |
| #define AUX_ERSTATUS (0x402) /*!< STATUS32 saved on exception */ |
| #define AUX_ECR (0x403) /*!< exception cause register */ |
| #define AUX_EFA (0x404) /*!< exception fault address */ |
| #define AUX_BTA (0x412) /*!< branch target address */ |
| /** @} */ |
| |
| /* New register to control which exceptions can be handled in NS mode */ |
| #define AUX_ERSEC_STAT (0x406) |
| #define AUX_ERSEC_STAT_BIT_ERM 31 |
| #define AUX_SEC_EXCEPT (0x407) |
| |
| /** |
| * \name MPU register set |
| * @{ |
| */ |
| #define AUX_MPU_EN (0x409) /*!< MPU enable register */ |
| #define AUX_MPU_ECR (0x420) /*!< MPU exception cause */ |
| #define AUX_MPU_RDB0 (0x422) /*!< MPU region descriptor base 0 */ |
| #define AUX_MPU_RDP0 (0x423) /*!< MPU region descriptor permission 0 */ |
| |
| /* MPU register set in silverstone */ |
| #define AUX_MPU_INDEX (0x448) |
| #define AUX_MPU_INDEX_BIT_D (31) |
| #define AUX_MPU_RSTART (0x449) |
| #define AUX_MPU_REND (0x44a) |
| #define AUX_MPU_RPER (0x44b) |
| #define AUX_MPU_RPER_BIT_S (15) |
| #define AUX_MPU_PROBE (0x44c) |
| #define AUX_MPU_ECR (0x420) |
| |
| #define AUX_NSC_TABLE_BASE (0x269) |
| #define AUX_NSC_TABLE_TOP (0x268) |
| |
| /** @} */ |
| |
| /** |
| * \name exception cause register (ECR) bit-field definition |
| * @{ |
| */ |
| #define AUX_ECR_VEC_MASK (0xff0000) /*!< [23:16] = exception vector */ |
| #define AUX_ECR_CODE_MASK (0x00ff00) /*!< [15: 8] = exception cause code */ |
| #define AUX_ECR_PARAM_MASK (0x0000ff) /*!< [ 7: 0] = exception parameters */ |
| /** @} */ |
| |
| /** |
| * \name exception vector number and cause code |
| * @{ |
| */ |
| #define AUX_ECR_V_INSN_ERR (0x02) /*!< vector number of illegal instruction */ |
| #define AUX_ECR_V_MACH_CHK (0x03) /*!< vector number of machine check */ |
| #define AUX_ECR_V_ITLB_MISS (0x04) /*!< vector number of instruction TLB missing exception */ |
| #define AUX_ECR_V_DTLB_MISS (0x05) /*!< vector number of data TLB missing exception */ |
| #define AUX_ECR_V_PROTV (0x06) /*!< vector number of protection violation */ |
| #define AUX_ECR_V_TRAP (0x09) /*!< vector number of trap */ |
| #define AUX_ECR_V_MISALIG_DATA (0x0d) /*!< vector number of misaligned data access */ |
| |
| #define AUX_ECR_C_PROTV_INST_FETCH (0x00) /*!< cause code of instruction fetch (protection violation) */ |
| #define AUX_ECR_C_PROTV_LOAD (0x01) /*!< cause code related memory read (protection violation) */ |
| #define AUX_ECR_C_PROTV_STORE (0x02) /*!< cause code related memory write (protection violation) */ |
| #define AUX_ECR_C_PROTV_XCHG (0x03) /*!< cause code related read-modify-write (protection violation) */ |
| |
| #define AUX_ECR_C_MCHK_DUP_TLB (0x01) /*!< \todo definition is to be added. */ |
| |
| #define AUX_ECR_C_BIT_DTLB_LD_MISS (8) /*!< \todo definition is to be added. */ |
| #define AUX_ECR_C_BIT_DTLB_ST_MISS (9) /*!< \todo definition is to be added. */ |
| /** @} */ |
| |
| /** |
| * \name interrupt related auxiliary register |
| * @{ |
| */ |
| #define AUX_IRQ_CTRL (0xe) /*!< interrupt context saving control register */ |
| #define AUX_INT_VECT_BASE (0x25) /*!< interrupt vector base register */ |
| #define AUX_INT_VECT_BASE_S (0x26) /*!< secure interrupt vector based register */ |
| #define AUX_IRQ_ACT (0x43) /*!< active interrupts register */ |
| #define AUX_IRQ_CAUSE (0x40a) /*!< interrupt cause register */ |
| #define AUX_IRQ_SELECT (0x40b) /*!< interrupt select register */ |
| #define AUX_IRQ_PRIORITY (0x206) /*!< interrupt priority register */ |
| #define AUX_IRQ_PRIORITY_BIT_S (0x8) /*!< S bit offset in interrupt priority register */ |
| #define AUX_IRQ_ENABLE (0x40c) /*!< interrupt enable register */ |
| #define AUX_IRQ_TRIGGER (0x40d) /*!< interrupt trigger: level or pulse */ |
| #define AUX_IRQ_PENDING (0x416) /*!< interrupt pending register */ |
| #define AUX_IRQ_PLUSE_CLR (0x415) /*!< interrupt pulse cancel register */ |
| #define AUX_IRQ_STATUS (0x40f) /*!< interrupt status register */ |
| #define AUX_IRQ_PRI_PENDING (0x200) /*!< interrupt priority pending register */ |
| #define AUX_IRQ_HINT (0x201) /*!< software interrupt trigger */ |
| /** @} */ |
| |
| /** |
| * \name cache related auxiliary register |
| * @{ |
| */ |
| #define AUX_IC_IVIC (0x10) /*!< invalidate instruction cache */ |
| #define AUX_IC_CTRL (0x11) /*!< instruction cache control register */ |
| #define AUX_IC_LIL (0x13) /*!< lock instruction cache line */ |
| #define AUX_IC_IVIL (0x19) /*!< invalidate instruction cache line */ |
| #define AUX_IC_RAM_ADDR (0x1a) /*!< instruction cache external access address */ |
| #define AUX_IC_TAG (0x1b) /*!< instruction cache tag access */ |
| #define AUX_IC_DATA (0x1d) /*!< instruction cache data access */ |
| #define AUX_DC_IVDC (0x47) /*!< invalidate data cache */ |
| #define AUX_DC_CTRL (0x48) /*!< data cache control register */ |
| #define AUX_DC_LDL (0x49) /*!< lock data cache line */ |
| #define AUX_DC_IVDL (0x4a) /*!< invalidate data cache line */ |
| #define AUX_DC_FLSH (0x4b) /*!< flush data cache */ |
| #define AUX_DC_FLDL (0x4c) /*!< flush data line */ |
| #define AUX_DC_RAM_ADDR (0x58) /*!< data cache external access address */ |
| #define AUX_DC_TAG (0x59) /*!< data cache tag access */ |
| #define AUX_DC_DATA (0x5b) /*!< data cache data access */ |
| /** @} */ |
| |
| /** |
| * \name dmac related auxiliary register |
| * @{ |
| */ |
| #define AUX_DMACTRL (0x680) /*!< DMA control register */ |
| #define AUX_DMACENB (0x681) /*!< DMA channel enable register */ |
| #define AUX_DMACDSB (0x682) /*!< DMA channel disable register */ |
| #define AUX_DMACHPRI (0x683) /*!< DMA channel high priority level register */ |
| #define AUX_DMACNPRI (0x684) /*!< DMA channel normal priority level register */ |
| #define AUX_DMACREQ (0x685) /*!< DMA channel transfer request register */ |
| #define AUX_DMACSTAT0 (0x686) /*!< DMA channel status register 0 */ |
| #define AUX_DMACSTAT1 (0x687) /*!< DMA channel status register 1 */ |
| #define AUX_DMACIRQ (0x688) /*!< DMA channel interrupt request status/clear register */ |
| #define AUX_DMACBASE (0x689) /*!< DMA channel structure register base address */ |
| #define AUX_DMACRST (0x68A) /*!< DMA channel reset register base address */ |
| |
| #define AUX_DMACTRL0 (0x690) /*!< DMA channel 0 control register when mapped in aux */ |
| #define AUX_DMASAR0 (0x691) /*!< DMA channel 0 source address register when mapped in aux */ |
| #define AUX_DMADAR0 (0x692) /*!< DMA channel 0 destination register when mapped in aux */ |
| #define AUX_DMACTRLx (AUX_DMACTRL0) /*!< DMA channel 0 control register when mapped in aux */ |
| #define AUX_DMASARx (AUX_DMASAR0) /*!< DMA channel 0 source address register when mapped in aux */ |
| #define AUX_DMADARx (AUX_DMADAR0) /*!< DMA channel 0 destination register when mapped in aux */ |
| /** @} */ |
| |
| |
| |
| /** |
| * \name other auxiliary register |
| * @{ |
| */ |
| #define AUX_IDENTITY (0x4) /*!< identity register */ |
| #define AUX_DMP_PERIPHERAL (0x20a) /*!< peripheral memory region */ |
| #define AUX_XFLAGS (0x44f) /*!< user extension flags register */ |
| #define AUX_MCIP_CMD (0x600) /*!< \todo definition is to be added. */ |
| #define AUX_MCIP_WDATA (0x601) /*!< \todo definition is to be added. */ |
| #define AUX_MCIP_READBACK (0x602) /*!< \todo definition is to be added. */ |
| #define AUX_SMART_CONTROL (0x700) /*!< \todo definition is to be added. */ |
| #define AUX_SMART_DATA (0x701) /*!< \todo definition is to be added. */ |
| |
| /** @} */ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #ifndef __ASSEMBLY__ |
| /* add type definition and function declaration here */ |
| #endif /* assembly */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| |
| #endif /* _ARC_HAL_CORE_H_ */ |
| |
| /** @} */ |