| //***************************************************************************** |
| // |
| //! @file am_reg_base_addresses.h |
| //! |
| //! @brief Register defines for all module base addresses |
| // |
| //***************************************************************************** |
| |
| //***************************************************************************** |
| // |
| // Copyright (c) 2017, Ambiq Micro |
| // All rights reserved. |
| // |
| // Redistribution and use in source and binary forms, with or without |
| // modification, are permitted provided that the following conditions are met: |
| // |
| // 1. Redistributions of source code must retain the above copyright notice, |
| // this list of conditions and the following disclaimer. |
| // |
| // 2. Redistributions in binary form must reproduce the above copyright |
| // notice, this list of conditions and the following disclaimer in the |
| // documentation and/or other materials provided with the distribution. |
| // |
| // 3. Neither the name of the copyright holder nor the names of its |
| // contributors may be used to endorse or promote products derived from this |
| // software without specific prior written permission. |
| // |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| // POSSIBILITY OF SUCH DAMAGE. |
| // |
| // This is part of revision v1.2.10-2-gea660ad-hotfix2 of the AmbiqSuite Development Package. |
| // |
| //***************************************************************************** |
| #ifndef AM_REG_BASE_ADDRESSES_H |
| #define AM_REG_BASE_ADDRESSES_H |
| |
| #include "stdint.h" |
| |
| // ARM standard register space (needed for macros) |
| #define REG_ITM_BASEADDR (0x00000000UL) |
| #define REG_JEDEC_BASEADDR (0x00000000UL) |
| #define REG_NVIC_BASEADDR (0x00000000UL) |
| #define REG_SYSCTRL_BASEADDR (0x00000000UL) |
| #define REG_SYSTICK_BASEADDR (0x00000000UL) |
| #define REG_TPIU_BASEADDR (0x00000000UL) |
| |
| // Peripheral register space |
| #define REG_ADC_BASEADDR (0x50010000UL) |
| #define REG_CACHECTRL_BASEADDR (0x40018000UL) |
| #define REG_CLKGEN_BASEADDR (0x40004000UL) |
| #define REG_CTIMER_BASEADDR (0x40008000UL) |
| #define REG_GPIO_BASEADDR (0x40010000UL) |
| #define REG_IOMSTR_BASEADDR (0x50004000UL) |
| #define REG_IOSLAVE_BASEADDR (0x50000000UL) |
| #define REG_MCUCTRL_BASEADDR (0x40020000UL) |
| #define REG_PDM_BASEADDR (0x50011000UL) |
| #define REG_PWRCTRL_BASEADDR (0x40021000UL) |
| #define REG_RSTGEN_BASEADDR (0x40000000UL) |
| #define REG_RTC_BASEADDR (0x40004000UL) |
| #define REG_UART_BASEADDR (0x4001C000UL) |
| #define REG_VCOMP_BASEADDR (0x4000C000UL) |
| #define REG_WDT_BASEADDR (0x40024000UL) |
| |
| // SRAM address space |
| #define SRAM_BASEADDR (0x10000000UL) |
| |
| #endif // AM_REG_BASE_ADDRESSES_H |
| |