/*
 / _____)             _              | |
( (____  _____ ____ _| |_ _____  ____| |__
 \____ \| ___ |    (_   _) ___ |/ ___)  _ \
 _____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
    (C)2013 Semtech

Description: SX1272 driver specific target board functions implementation

License: Revised BSD License, see LICENSE.TXT file include in the project

Maintainer: Miguel Luis and Gregory Cristian
*/
#ifndef __SX1272_ARCH_H__
#define __SX1272_ARCH_H__

#define RADIO_SPI_IDX           MYNEWT_VAL(SX1272_SPI_IDX)
#if RADIO_SPI_IDX != 0
#error "Invalid SX1272_SPI_IDX value. Must be zero"
#endif

#if MYNEWT_VAL(SX1272_SPI_CS_PIN) == -1
#error "Must set SX1272_SPI_CS_PIN pin (spi slave select)"
#else
#define RADIO_NSS               MYNEWT_VAL(SX1272_SPI_CS_PIN)
#endif

#define SX1272_DIO0             MYNEWT_VAL(SX1272_DIO0_PIN)
#define SX1272_DIO1             MYNEWT_VAL(SX1272_DIO1_PIN)
#define SX1272_DIO2             MYNEWT_VAL(SX1272_DIO2_PIN)
#define SX1272_DIO3             MYNEWT_VAL(SX1272_DIO3_PIN)
#define SX1272_DIO4             MYNEWT_VAL(SX1272_DIO4_PIN)
#define SX1272_DIO5             MYNEWT_VAL(SX1272_DIO5_PIN)

#if MYNEWT_VAL(SX1272_RESET_PIN) == -1
#error "Must set SX1272_RESET_PIN pin (spi slave select)"
#else
#define SX1272_NRESET           MYNEWT_VAL(SX1272_RESET_PIN)
#endif

#if MYNEWT_VAL(SX1272_HAS_ANT_SW)
#define SX1272_RXTX             MYNEWT_VAL(SX1272_RXTX_PIN)
#endif

#if MYNEWT_VAL(SX1272_HAS_COMP_ANT_SW)
#define SX1272_RXTX             MYNEWT_VAL(SX1272_RXTX_PIN)
#define SX1272_N_RXTX           MYNEWT_VAL(SX1272_N_RXTX_PIN)
#endif

/*!
 * \brief Radio hardware registers initialization definition
 *
 * \remark Can be automatically generated by the SX1272 GUI (not yet implemented)
 */
#define RADIO_INIT_REGISTERS_VALUE                \
{                                                 \
    { MODEM_FSK , REG_LNA                , 0x23 },\
    { MODEM_FSK , REG_RXCONFIG           , 0x1E },\
    { MODEM_FSK , REG_RSSICONFIG         , 0xD2 },\
    { MODEM_FSK , REG_AFCFEI             , 0x01 },\
    { MODEM_FSK , REG_PREAMBLEDETECT     , 0xAA },\
    { MODEM_FSK , REG_OSC                , 0x07 },\
    { MODEM_FSK , REG_SYNCCONFIG         , 0x12 },\
    { MODEM_FSK , REG_SYNCVALUE1         , 0xC1 },\
    { MODEM_FSK , REG_SYNCVALUE2         , 0x94 },\
    { MODEM_FSK , REG_SYNCVALUE3         , 0xC1 },\
    { MODEM_FSK , REG_PACKETCONFIG1      , 0xD8 },\
    { MODEM_FSK , REG_FIFOTHRESH         , 0x8F },\
    { MODEM_FSK , REG_IMAGECAL           , 0x02 },\
    { MODEM_FSK , REG_DIOMAPPING1        , 0x00 },\
    { MODEM_FSK , REG_DIOMAPPING2        , 0x30 },\
    { MODEM_LORA, REG_LR_DETECTOPTIMIZE  , 0x43 },\
    { MODEM_LORA, REG_LR_PAYLOADMAXLENGTH, 0x40 },\
}                                                 \

/*!
 * \brief Initializes the radio I/Os pins interface
 */
void SX1272IoInit(void);

/*!
 * \brief Initializes DIO IRQ handlers
 *
 * \param [IN] irqHandlers Array containing the IRQ callback functions
 */
void SX1272IoIrqInit(DioIrqHandler **irqHandlers);

/*!
 * \brief De-initializes the radio I/Os pins interface.
 *
 * \remark Useful when going in MCU low power modes
 */
void SX1272IoDeInit(void);

/*!
 * \brief Sets the radio output power.
 *
 * \param [IN] power Sets the RF output power
 */
void SX1272SetRfTxPower(int8_t power);

/*!
 * \brief Gets the board PA selection configuration
 *
 * \param [IN] channel Channel frequency in Hz
 * \retval PaSelect RegPaConfig PaSelect value
 */
uint8_t SX1272GetPaSelect(uint32_t channel);

/*!
 * \brief Set the RF Switch I/Os pins in Low Power mode
 *
 * \param [IN] status enable or disable
 */
void SX1272SetAntSwLowPower(bool status);

/*!
 * \brief Initializes the RF Switch I/Os pins interface
 */
void SX1272AntSwInit(void);

/*!
 * \brief De-initializes the RF Switch I/Os pins interface
 *
 * \remark Needed to decrease the power consumption in MCU low power modes
 */
void SX1272AntSwDeInit(void);

/*!
 * \brief Controls the antenna switch if necessary.
 *
 * \remark see errata note
 *
 * \param [IN] opMode Current radio operating mode
 */
void SX1272SetAntSw(uint8_t opMode);

/*!
 * \brief Checks if the given RF frequency is supported by the hardware
 *
 * \param [IN] frequency RF frequency to be checked
 * \retval isSupported [true: supported, false: unsupported]
 */
bool SX1272CheckRfFrequency(uint32_t frequency);

/*!
 * \brief Gets the Defines the time required for the TCXO to wakeup [ms].
 *
 * \retval time Board TCXO wakeup time in ms.
 */
uint32_t SX1272GetBoardTcxoWakeupTime( void );

/*!
 * \brief Disables all receive related IO Irqs
 */
void SX1272RxIoIrqDisable( void );

/*!
 * \brief Enables all receive related IO Irqs
 */
void SX1272RxIoIrqEnable( void );


/*!
 * Radio hardware and global parameters
 */
extern SX1272_t SX1272;

#endif // __SX1272_ARCH_H__