# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#  http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.
#

syscfg.defs:
    MCU_FLASH_MIN_WRITE_SIZE:
        description: >
            Specifies the required alignment for internal flash writes.
            Used internally by the newt tool.
        value:
        restriction: $notnull

    TRNG:
        description: 'Enable True Random Number Generator (RNGA)'
        value: 0

    CRYPTO:
        description: 'Enable cryptograpy accelerator (CAU)'
        value: 0

    HASH:
        description: 'Enable hash accelerator (CAU)'
        value: 0

    TIMER_0:
        description: 'Enable Timer 0'
        value:  1
    TIMER_1:
        description: 'Enable Timer 1'
        value: 0

    GPIO_MAX_IRQ:
        description: 'Max number of GPIO pins assigned to IRQs'
        value: 10

    # UART0 PINS on CMSIS-DAP Interface
    UART_0:
        description: 'Whether to enable UART0'
        value:  0
    UART_0_PORT:
        description: 'GPIO port for UART0 pins'
        value:  PORTB
    UART_0_PORT_CLOCK:
        description: 'Clock to enable for UART0 pins'
        value:  kCLOCK_PortB
    UART_0_PIN_TX:
        description: 'TX pin for UART0'
        value:  17
    UART_0_PIN_RX:
        description: 'RX pin for UART0'
        value:  16

    UART_1:
        description: 'Whether to enable UART1'
        value:  0
    UART_1_PORT:
        description: 'GPIO port for UART1 pins'
        value:  PORTC
    UART_1_PORT_CLOCK:
        description: 'Clock to enable for UART1 pins'
        value:  kCLOCK_PortC
    UART_1_PIN_TX:
        description: 'TX pin for UART1'
        value:  4
    UART_1_PIN_RX:
        description: 'RX pin for UART1x'
        value:  3

    UART_2:
        description: 'Whether to enable UART2'
        value:  0
    UART_2_PORT:
        description: 'GPIO port for UART2 pins'
        value:  PORTD
    UART_2_PORT_CLOCK:
        description: 'Clock to enable for UART2 pins'
        value:  kCLOCK_PortD
    UART_2_PIN_TX:
        description: 'TX pin for UART2'
        value:  2
    UART_2_PIN_RX:
        description: 'RX pin for UART2'
        value:  3

    UART_3:
        description: 'Whether to enable UART3'
        value:  0
    UART_3_PORT:
        description: 'GPIO port for UART3 pins'
        value:  PORTC
    UART_3_PORT_CLOCK:
        description: 'Clock to enable for UART3 pins'
        value:  kCLOCK_PortC
    UART_3_PIN_TX:
        description: 'TX pin for UART3'
        value:  17
    UART_3_PIN_RX:
        description: 'RX pin for UART3'
        value:  16

    UART_4:
        description: 'Whether to enable UART4'
        value:  0
    UART_4_PORT:
        description: 'GPIO port for UART4 pins'
        value:  PORTC
    UART_4_PORT_CLOCK:
        description: 'Clock to enable for UART4 pins'
        value:  kCLOCK_PortC
    UART_4_PIN_TX:
        description: 'TX pin for UART4'
        value:  15
    UART_4_PIN_RX:
        description: 'RX pin for UART4'
        value:  14

    UART_5:
        description: 'Whether to enable UART5'
        value:  0
    UART_5_PORT:
        description: 'GPIO port for UART5 pins'
        value:  PORTE
    UART_5_PORT_CLOCK:
        description: 'Clock to enable for UART5 pins'
        value:  kCLOCK_PortE
    UART_5_PIN_TX:
        description: 'TX pin for UART5'
        value:  9
    UART_5_PIN_RX:
        description: 'RX pin for UART5'
        value:  8

    I2C_0:
        description: 'Enable I2C0'
        value: 0
    I2C_0_PORT:
        description: 'GPIO port for I2C0'
        value: PORTB
    I2C_0_MUX:
        description: 'Pin mux selection for I2C0'
        value: kPORT_MuxAlt2
    I2C_0_PIN_SCL:
        description: 'SCL pin for I2C_0'
        value: 0
    I2C_0_PIN_SDA:
        description: 'SDA pin for I2C_0'
        value: 1
    I2C_0_FREQ_KHZ:
        description: 'Frequency [kHz] for I2C_0'
        value: 100

    I2C_1:
        description: 'Enable DA1469x I2C1.'
        value: 0
    I2C_1_PORT:
        description: 'GPIO port for I2C1'
        value: PORTC
    I2C_1_MUX:
        description: 'Pin mux selection for I2C1'
        value: kPORT_MuxAlt2
    I2C_1_PIN_SCL:
        description: 'SCL pin for I2C_1'
        value: 10
    I2C_1_PIN_SDA:
        description: 'SDA pin for I2C_1'
        value: 11
    I2C_1_FREQ_KHZ:
        description: 'Frequency [kHz] for I2C_1'
        value: 100

    I2C_2:
        description: 'Enable DA1469x I2C2.'
        value: 0
    I2C_2_PORT:
        description: 'GPIO port for I2C2'
        value: PORTA
    I2C_2_MUX:
        description: 'Pin mux selection for I2C2'
        value: kPORT_MuxAlt4
    I2C_2_PIN_SCL:
        description: 'SCL pin for I2C_2'
        value: 2
    I2C_2_PIN_SDA:
        description: 'SDA pin for I2C_2'
        value: 1
    I2C_2_FREQ_KHZ:
        description: 'Frequency [kHz] for I2C_2'
        value: 100

    I2C_3:
        description: 'Enable DA1469x I2C3.'
        value: 0
    I2C_3_PORT:
        description: 'GPIO port for I2C3'
        value: PORTA
    I2C_3_MUX:
        description: 'Pin mux selection for I2C3'
        value: kPORT_MuxAlt4
    I2C_3_PIN_SCL:
        description: 'SCL pin for I2C_3'
        value: 2
    I2C_3_PIN_SDA:
        description: 'SDA pin for I2C_3'
        value: 1
    I2C_3_FREQ_KHZ:
        description: 'Frequency [kHz] for I2C_3'
        value: 100

    SPI_0_MASTER:
        description: 'Enable NXP SPI Master 0'
        value: 0
        restrictions:
            - "!SPI_0_SLAVE"
    SPI_0_MASTER_PORT:
        description: 'GPIO port for SPI_0_MASTER'
        value: PORTA
    SPI_0_MASTER_MUX:
        description: 'Pin mux selection for SPI_0_MASTER'
        value: kPORT_MuxAlt2
    SPI_0_MASTER_PIN_SCK:
        description: 'SCK pin for SPI_0_MASTER'
        value: 15
    SPI_0_MASTER_PIN_MOSI:
        description: 'MOSI pin for SPI_0_MASTER'
        value: 16
    SPI_0_MASTER_PIN_MISO:
        description: 'MISO pin for SPI_0_MASTER'
        value: 17

    SPI_0_SLAVE:
        description: 'Enable NXP SPI Slave 0'
        value: 0
        restrictions:
            - "!SPI_0_MASTER"
    SPI_0_SLAVE_PORT:
        description: 'GPIO port for SPI_0_SLAVE'
        value: PORTA
    SPI_0_SLAVE_MUX:
        description: 'Pin mux selection for SPI_0_SLAVE'
        value: kPORT_MuxAlt2
    SPI_0_SLAVE_PIN_SCK:
        description: 'SCK pin for SPI_0_SLAVE'
        value: 15
    SPI_0_SLAVE_PIN_MOSI:
        description: 'MOSI pin for SPI_0_SLAVE'
        value: 17
    SPI_0_SLAVE_PIN_MISO:
        description: 'MISO pin for SPI_0_SLAVE'
        value: 16
    SPI_0_SLAVE_PIN_SS:
        description: 'SS pin for SPI_0_SLAVE'
        value: 14

    SPI_1_MASTER:
        description: 'Enable NXP SPI Master 1'
        value: 0
        restrictions:
            - "!SPI_1_SLAVE"
    SPI_1_MASTER_PORT:
        description: 'GPIO port for SPI_1_MASTER'
        value: PORTD
    SPI_1_MASTER_MUX:
        description: 'Pin mux selection for SPI_1_MASTER'
        value: kPORT_MuxAlt7
    SPI_1_MASTER_PIN_SCK:
        description: 'SCK pin for SPI_1_MASTER'
        value: 5
    SPI_1_MASTER_PIN_MOSI:
        description: 'MOSI pin for SPI_1_MASTER'
        value: 6
    SPI_1_MASTER_PIN_MISO:
        description: 'MISO pin for SPI_1_MASTER'
        value: 7

    SPI_1_SLAVE:
        description: 'Enable NXP SPI Slave 1'
        value: 0
        restrictions:
            - "!SPI_1_MASTER"
    SPI_1_SLAVE_PORT:
        description: 'GPIO port for SPI_0_SLAVE'
        value: PORTD
    SPI_1_SLAVE_MUX:
        description: 'Pin mux selection for SPI_0_SLAVE'
        value: kPORT_MuxAlt7
    SPI_1_SLAVE_PIN_SCK:
        description: 'SCK pin for SPI_1_SLAVE'
        value: 5
    SPI_1_SLAVE_PIN_MOSI:
        description: 'MOSI pin for SPI_1_SLAVE'
        value: 7
    SPI_1_SLAVE_PIN_MISO:
        description: 'MISO pin for SPI_1_SLAVE'
        value: 6
    SPI_1_SLAVE_PIN_SS:
        description: 'SS pin for SPI_1_SLAVE'
        value: 4

    SPI_2_MASTER:
        description: 'Enable NXP SPI Master 2'
        value: 0
        restrictions:
            - "!SPI_2_SLAVE"
    SPI_2_MASTER_PORT:
        description: 'GPIO port for SPI_1_MASTER'
        value: PORTB
    SPI_2_MASTER_MUX:
        description: 'Pin mux selection for SPI_1_MASTER'
        value: kPORT_MuxAlt2
    SPI_2_MASTER_PIN_SCK:
        description: 'SCK pin for SPI_2_MASTER'
        value: 21
    SPI_2_MASTER_PIN_MOSI:
        description: 'MOSI pin for SPI_2_MASTER'
        value: 22
    SPI_2_MASTER_PIN_MISO:
        description: 'MISO pin for SPI_2_MASTER'
        value: 23

    SPI_2_SLAVE:
        description: 'Enable NXP SPI Slave 2'
        value: 0
        restrictions:
            - "!SPI_2_MASTER"
    SPI_2_SLAVE_PORT:
        description: 'GPIO port for SPI_0_SLAVE'
        value: PORTB
    SPI_2_SLAVE_MUX:
        description: 'Pin mux selection for SPI_0_SLAVE'
        value: kPORT_MuxAlt2
    SPI_2_SLAVE_PIN_SCK:
        description: 'SCK pin for SPI_2_SLAVE'
        value: 21
    SPI_2_SLAVE_PIN_MOSI:
        description: 'MOSI pin for SPI_2_SLAVE'
        value: 23
    SPI_2_SLAVE_PIN_MISO:
        description: 'MISO pin for SPI_2_SLAVE'
        value: 22
    SPI_2_SLAVE_PIN_SS:
        description: 'SS pin for SPI_2_SLAVE'
        value: 20

    QSPI_ENABLE:
        description: 'NXP QSPI'
        value: 'MYNEWT_VAL_QSPIA_ENABLE || MYNEWT_VAL_QSPIB_ENABLE'
    QSPI_DDR_MODE:
        description: >
            Use Double Data Rate mode.
            If disabled uses Single Data Rate mode.
        value: 0
    QSPI_SCK_DELAY:
        description: >
            Minimum amount of time that the CSN pin must stay high
            before it can go low again. Value is specified in number of 16
            MHz periods (62.5 ns).
        value: 0
    QSPI_SCK_FREQ:
        description: '32MHz clock divider (0-31). Clock = 32MHz / (1+divider)'
        value: 0
    QSPI_SPI_MODE:
        description: 'SPI 0=Mode0 or 1=Mode3'
        value: 0
    QSPI_FLASH_SECTOR_SIZE:
        description: 'QSPI flash sector size.'
        value: 0
    QSPI_FLASH_PAGE_SIZE:
        description: 'QSPI flash page size.'
        value: 0
    QSPI_FLASH_SECTOR_COUNT:
        description: 'QSPI flash sector count'
        value: 0
    QSPI_FLASH_MIN_WRITE_SIZE:
        description: 'QSPI flash write alignment'
        value: 0
    QSPIA_ENABLE:
        description: 'Enable QSPIA'
        value: 0
    QSPIA_PORT:
        description: 'Port for QSPIA pins'
        value: -1
    QSPIA_MUX:
        description: 'Mux for QSPIA pins'
        value: -1
    QSPIA_PIN_SS:
        description: 'SS pin for QSPIA'
        value: -1
    QSPIA_PIN_SCK:
        description: 'SCK pin for QSPIA'
        value: -1
    QSPIA_PIN_DIO0:
        description: 'DIO0 pin for QSPIA'
        value: -1
    QSPIA_PIN_DIO1:
        description: 'DIO1 pin for QSPIA'
        value: -1
    QSPIA_PIN_DIO2:
        description: 'DIO2 pin for QSPIA'
        value: -1
    QSPIA_PIN_DIO3:
        description: 'DIO3 pin for QSPIA'
        value: -1
    QSPIB_ENABLE:
        description: 'Enable QSPIB'
        value: 0
    QSPIB_PORT:
        description: 'Port for QSPIB pins'
        value: -1
    QSPIB_MUX:
        description: 'Mux for QSPIB pins'
        value: -1
    QSPIB_PIN_SS:
        description: 'SS pin for QSPIB'
        value: -1
    QSPIB_PIN_SCK:
        description: 'SCK pin for QSPIB'
        value: -1
    QSPIB_PIN_DIO0:
        description: 'DIO0 pin for QSPIB'
        value: -1
    QSPIB_PIN_DIO1:
        description: 'DIO1 pin for QSPIB'
        value: -1
    QSPIB_PIN_DIO2:
        description: 'DIO2 pin for QSPIB'
        value: -1
    QSPIB_PIN_DIO3:
        description: 'DIO3 pin for QSPIB'
        value: -1