<?xml version="1.0" encoding="UTF-8"?>
<!--
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
-->
<!-- XXX check rendering of ulink with content and markup; replace footnotes and literal when appropiate -->
<!DOCTYPE article PUBLIC
    "-//OASIS//DTD DocBook XML V4.5//EN"
    "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
<article lang="en-US">
  <title>Apache Tobago Tutorial</title>

  <sect1>
    <title>Introduction</title>

    <para>Tobago aids developers in creating web applications with a
    consistent look and feel. Therefore it provides the developer with a
    collection of comfortable high-level components, which can be positioned
    with a layout manager. The goal is to approximate the appearance of
    classical desktop applications. Tobago is based on a strict separation of
    structure and design. The developer describes the structure of a page and
    which controls it contains, the representation of the page and its style
    is handled by Tobago. The developer can customize the design and style
    through themes. Currently Tobago only contains themes for HTML clients. To
    achieve output independence, the views should be developed without any
    HTML, CSS, or JavaScript. A Tobago page normally contains only JSF and
    Tobago tags. Features, styling and design via HTML, CSS, or JavaScript are
    handled by the theme.</para>

    <para>The development of Tobago started in 2002. With the introduction of
    the JSF standard it was decided to base Tobago on JSF. By 2005, Tobago was
    released as an open-source project and became a sub project of Apache
    MyFaces in 2006.</para>

    <para>We will be referencing a simple address book application throughout
    this chapter to demonstrate the various features of Tobago.</para>

    <sect2>
      <title>Participation</title>

      <para>Tobago is a constantly maturing project with rich potential to
      fill a unique niche in the MyFaces family — feel free to sign up on the
      MyFaces mailing lists<footnote><para>See <ulink url="http://myfaces.apache.org/tobago/mail-lists.html"/></para></footnote>
      or sign up to the JIRA<footnote><para>See <ulink url="http://issues.apache.org/jira/browse/TOBAGO"/></para></footnote> and participate in the
      process. Additionally, you can also check out the MyFaces project
      website to find out about future releases.</para>
    </sect2>
  </sect1>

  <sect1 id="sec-getting-started">
    <title>Getting Started</title>

    <para>The Tobago project contains several examples like the demo, the
    address book and the blank example. The demo example demonstrates many of
    the important features of Tobago and acts as the online documentation. The
    address book example is a small self-contained web application. Finally,
    there is the blank example, which is a minimal Tobago application that can
    act as a starting point for a new application. The Tobago download page
    links to the example archive, which contains a precompiled web application
    archive (WAR) for the blank example and the demo. The source for the blank
    example can be obtained from the Subversion repository. Checking out the
    blank example for Tobago is achieved by entering the following
    command in the shell:</para>

    <programlisting>svn checkout \
  http://svn.apache.org/repos/asf/myfaces/tobago/trunk/tobago-example/tobago-example-blank/ \
  blank</programlisting>

    <para>For building the blank example Java 5 and Maven 2 (at least 2.0.6)
    are needed. Running Tobago applications in a Java 1.4 environment is
    supported, too (Tobago 1.0.x). The Tobago distribution contains bytecode transformed
    jars, which were generated with Retrotranslator.</para>

    <para>A Tobago application is a standard web application and needs a web
    application descriptor (<filename>WEB-INF/web.xml</filename>). As a JSF application the <literal>web.xml</literal>
    file has to include a servlet definition for the <classname>FacesServlet</classname> and a
    corresponding servlet mapping. During development it is convenient to
    serve the resources for Tobago like images, scripts, and style sheets
    directly out of the theme jars. To accomplish this, the <filename>web.xml</filename> file needs
    to contain the definition for the Tobago <classname>ResourceServlet</classname> and the
    corresponding servlet mapping. For a production environment it is advised
    to extract the theme resources and let the servlet container or web server
    serve these resources directly — see <xref linkend="sec-advanced-assembly"/>.</para>

    <para>The JSF specific configuration for Tobago is contained in the
    <filename>faces-config.xml</filename> file inside the Tobago core jar. To make the
    configuration available for JSF the <filename>tobago-core.jar</filename> has to be placed into
    the web application. The Tobago specific configuration is defined in the
    <filename>WEB-INF/tobago-config.xml</filename> file. A minimal configuration should at least
    specify the default theme for the Tobago application.</para>

    <programlisting role="XML">&lt;tobago-config&gt;
  &lt;theme-config&gt;
    &lt;default-theme&gt;speyside&lt;/default-theme&gt;
  &lt;/theme-config&gt;
&lt;/tobago-config&gt;</programlisting>

    <para>A Tobago web application needs to package some libraries. First of
    all, the Tobago core jar and theme jars should be made available in the
    application. Some themes depend on each other, for example to be able to
    use the Speyside theme the Scarborough theme and Standard theme have to be
    included as well. These dependencies are defined in the
    <filename>META-INF/tobago-config.xml</filename> files inside the theme jars.</para>

    <para>Tobago depends on several Jakarta Commons libraries:</para>

    <itemizedlist>
      <listitem>
        <para>commons-beanutils</para>
      </listitem>

      <listitem>
        <para>commons-collections (only since Tobago 3.x)</para>
      </listitem>

      <listitem>
        <para>commons-digester (only Tobago 1.x)</para>
      </listitem>

      <listitem>
        <para>commons-fileupload</para>
      </listitem>

      <listitem>
        <para>commons-io</para>
      </listitem>

      <listitem>
        <para>commons-lang</para>
      </listitem>

      <listitem>
        <para>commons-logging</para>
      </listitem>
    </itemizedlist>

    <para>Additionally a JSF implementation has to be selected. For MyFaces
    the following additional libraries have to be included:</para>

    <itemizedlist>
      <listitem>
        <para>myfaces-api</para>
      </listitem>

      <listitem>
        <para>myfaces-impl</para>
      </listitem>

      <listitem>
        <para>commons-codec</para>
      </listitem>

      <listitem>
        <para>commons-el</para>
      </listitem>

      <listitem>
        <para>jstl</para>
      </listitem>
    </itemizedlist>

    <para>Finally, a logging mechanism has to be selected. All Tobago examples
    use log4j as a default.</para>

    <sect2>
      <title>Basic Tobago Page</title>

      <para>To use JSP as a rendering technology Tobago provides two tag
      libraries which contain the definition of available JSP tags — the
      Tobago core library and the extension library. The tag library
      definitions (TLD) for these libraries contain documentation for the tags
      and define the available required and optional attributes. IDEs can
      leverage this information to help the developer construct JSP
      pages.</para>

      <para>A basic Tobago page looks like this:</para>

      <programlisting role="XML">&lt;%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %&gt;
&lt;%@ taglib uri="http://myfaces.apache.org/tobago/component" prefix="tc" %&gt;
&lt;%@ taglib uri="http://myfaces.apache.org/tobago/extension" prefix="tx" %&gt;
&lt;%@ page contentType="text/html;charset=UTF-8" language="java" %&gt;
&lt;f:view&gt;
  &lt;tc:page&gt;
    &lt;f:facet name="layout"&gt;
      &lt;tc:gridLayout/&gt;
    &lt;/f:facet&gt;
    &lt;tc:out value="Hello World"/&gt;
  &lt;/tc:page&gt;
&lt;/f:view&gt;</programlisting>
    </sect2>

    <sect2>
      <title>Building and Deploying with Maven</title>

      <para>The Tobago project leverages Maven for all build management and
      Maven is the easiest way to build a web application with Tobago. The
      project descriptor (<filename>pom.xml</filename>) or project object model (POM) of Tobago
      defines all necessary dependencies and the Maven repository server and
      its mirrors provide the appropriate jars. For more information on Maven
      see the Maven web site<footnote><para>See <ulink url="http://maven.apache.org/"/></para></footnote>
      and the book <citetitle>Better builds with Maven</citetitle><footnote><para>See <ulink url="http://www.devzuz.com/web/guest/products/resources#BBWM"/></para></footnote>.</para>

      <para>The POM for the blank example specifies the packaging of the
      project as <literal>"war"</literal>. The dependencies for the web application are managed
      by the <literal>&lt;dependencies&gt;</literal> element in the POM Maven automatically takes
      care of the dependencies through its transitivity mechanism. The POM
      comprises all necessary information needed to compile and package a web
      application archive. Use the following command in the shell:</para>

      <programlisting>mvn package</programlisting>

      <para>This results in a WAR archive in the target directory, where Maven
      stores its build artifacts and intermediary files. Moreover Maven can be
      used to deploy the WAR on an application server as well. The Tobago
      example POM, which is the parent POM of the blank example, contains the
      necessary information to deploy a WAR on an embedded Jetty server. By
      executing</para>

      <para><programlisting>mvn jetty:run-exploded</programlisting></para>

      <para>a Jetty server is started via Maven and the WAR is deployed on
      this servlet container. The server listens on the port 8080 and the web
      application can accessed under the URL
      <literal>http://localhost:8080/tobago-example-blank/</literal>.</para>
    </sect2>
  </sect1>

  <sect1>
    <title>Controls</title>

    <para>Tobago makes use of the extensibility of JSF to achieve its
    decoupling from the rendering tier. It provides its own tag library,
    components and render kit. Besides the JSP tag library, an alternative
    rendering technology called Facelets can be used, too. The
    <emphasis>extension</emphasis> folder
    in the Tobago repository contains the support library to use Facelets
    instead of JSP.</para>

    <para>Because of the strict separation between structure and design, it is
    possible to use an application with different themes. This allows the
    developer to execute applications that can render different corporate
    designs for different portals while keeping the view source unchanged.
    This mechanism is easier than adapting plain CSS in the sense that various
    stylesheet themes/skins have to be referenced and loaded based on
    environmental parameters.</para>

    <para>Besides the basic input controls HTML provides, Tobago offers
    additional high level controls, which a traditional desktop application
    developers would recognize. These controls will be described in the
    following sections.</para>

    <para>Tobago also contains a deprecated tree control. The API of this tree
    control does not really fit to the other controls. But the sandbox already
    contains a version of the future tree control, which will be introduced
    in Tobago 1.5.</para>

    <sect2>
      <title>Basic Controls</title>

      <para>HTML offers a large set of input controls which form the basis of
      Tobago's controls. This base includes single line text input fields,
      text areas, labels, radio buttons, check boxes, links, buttons, and so
      on. The Tobago demo shows these controls in action. A precompiled WAR
      for the demo is part of the example distribution and the Tobago web site
      links to a server with a live version. See <xref linkend="fig-basic-controls"/>:</para>

      <para><figure id="fig-basic-controls">
          <title>Basic controls</title>

          <graphic fileref="resources/basic-controls.png" />
        </figure></para>

      <sect3>
        <title>Input Control</title>

        <para>A single line input control can be rendered with the
        <literal>&lt;tc:in&gt;</literal> tag. The extended version can be accessed with
        <literal>&lt;tx:in&gt;</literal>. In general the extension library, which is usually
        referenced by the tx prefix, provides convenience variants of
        controls. For the <literal>&lt;tc:in&gt;</literal> control the extended version
        &lt;tx:in&gt; contains boilerplate code for rendering labels. For form
        like input views nearly every input control has a corresponding label.
        The label is connected to the input control. If the label is clicked
        the input control gains focus.</para>

        <programlisting role="XML">&lt;tx:in
    label="#{bundle.name}"
    value="#{address.name}"
    required="false" readonly="false"
    disabled="false" rendered="true" /&gt;</programlisting>

        <para>The <literal>label</literal> attribute determines the textual description for the
        control. It is laid out with a grid layout manager. The theme
        specifies the default label width, but it can be overwritten with the
        <literal>labelWidth</literal> attribute. If the label contains an underscore character
        the following character will become an access key. This is visualized
        by underlining the access key character. If the access key is pressed
        together with the <keycap>Alt</keycap> key the corresponding input field gains focus.
        The <literal>value</literal> attribute contains the content of the input control. The
        <literal>required</literal> attribute controls validation and allows the theme to render
        a special marker for required input. The required feature is rendered
        as a small box with a check mark inside the input field to inform the
        user to enter information into this field. Read-only controls do not
        allow the user to modify the value of the input control. A disabled
        control cannot gain focus, the label is rendered in a fashion to
        highlight the disabled nature of the input control and the user cannot
        copy content from the input control. The <literal>rendered</literal> attribute manages if
        the control is rendered at all. If the control is not rendered the
        layout manager can distribute the resulting space to other controls.
        For password fields the respective attribute can be set to <constant>true</constant>. If a
        page contains multiple input controls the first control will be
        focused by default. This behavior can be overwritten by setting the
        <literal>focus</literal> attribute of an input control to <constant>true</constant>.</para>

        <para><figure id="fig-editor">
            <title>Address editor</title>

            <graphic fileref="resources/editor.png" />
          </figure></para>
      </sect3>

      <sect3>
        <title>Commands</title>

        <para>Tobago supports different ways to use commands. The basic
        versions are <literal>&lt;tc:button&gt;</literal> and <literal>&lt;tc:link&gt;</literal>; others include
        toolbars and menus, which are described in later sections.</para>

        <programlisting role="XML">&lt;tc:button label="Delete" action="#{controller.delete}"
    image="image/delete.png" defaultCommand="false"&gt;
  &lt;f:facet name="confirmation"&gt;
    &lt;tc:out value="Do you want to delete it?" /&gt;
  &lt;/f:facet&gt;
&lt;/tc:button&gt;</programlisting>

        <para>The <literal>label</literal> attribute defines the text on the button. The <literal>action</literal>
        attribute points to a method which is executed if the button is
        pressed. By means of the <literal>image</literal> attribute the button can be decorated
        with an icon. The image can be placed relatively to the root of the
        web application or the resource manager can be used to locate the
        image — see <xref linkend="sec-resource-management"/>. The <literal>&lt;tc:button&gt;</literal>
        control supports the confirmation facet, which generates a message
        dialog. Only if the confirmation question is answered with OK, the
        action is executed. If the <literal>defaultCommand</literal> attribute is set to true the
        button will be activated as soon as the <keycap>Enter</keycap> key is pressed.</para>

        <para>Tobago includes a double request prevention mechanism. After a
        button or link is clicked in the client, the page is blocked to avoid
        duplicate clicks. If the server request takes longer than expected a
        transitioning effect is shown. First the page is faded out and later a
        progress animation is presented. To turn this effect off the
        <literal>transition</literal> attribute can be set to <constant>false</constant>.</para>

        <para>A generic <literal>&lt;tc:command&gt;</literal> control can be used for event
        facets for select controls like <literal>&lt;tc:selectBooleanCheckbox&gt;</literal>,
        <literal>&lt;tc:selectOneRadio&gt;</literal>, <literal>&lt;tc:selectManyCheckbox&gt;</literal>, and
        <literal>&lt;tc:selectOneChoice&gt;</literal>. This is how the theme changing in the
        footer of the address book example is realized. If a new theme is
        selected, a change event is triggered, the page is submitted, and the
        action of the <literal>&lt;tc:command&gt;</literal> inside the <literal>change</literal> facet is called:</para>

        <programlisting role="XML">&lt;tx:selectOneChoice label="#{bundle.footerTheme}" value="#{controller.theme}"&gt;
  &lt;f:selectItems value="#{controller.themeItems}" /&gt;
  &lt;f:facet name="change"&gt;
    &lt;tc:command action="#{controller.themeChanged}"/&gt;
  &lt;/f:facet&gt;
&lt;/tx:selectOneChoice&gt;</programlisting>

        <para>Besides the change event select controls also support the click
        event. The click event is triggered if someone clicks on the control.
        The actual value does not need to change to trigger the event.</para>
      </sect3>
    </sect2>

    <sect2>
      <title>Sheet Control</title>

      <para>The <literal>&lt;tc:sheet&gt;</literal> component allows to display tabular data. The
      address book uses it to provide an overview of all stored
      addresses.</para>

      <programlisting role="XML">&lt;tc:sheet columns="1*;1*;1*" value="#{controller.currentAddressList}"
    var="address" state="#{controller.selectedAddresses}"
    sortActionListener="#{controller.sheetSorter}" rows="25"
    showRowRange="left" showPageRange="right" showDirectLinks="center"&gt;
  &lt;tc:column id="firstName" label="#{bundle.listFirstName}" sortable="true"
      rendered="#{controller.renderFirstName}"&gt;
    &lt;tc:out value="#{address.firstName}" /&gt;
  &lt;/tc:column&gt;
  &lt;tc:column id="lastName" label="#{bundle.listLastName}" sortable="true"
      rendered="#{controller.renderLastName}"&gt;
    &lt;tc:out value="#{address.lastName}" /&gt;
  &lt;/tc:column&gt;
  &lt;tc:column id="dayOfBirth" label="Birthday" sortable="true"
      rendered="#{controller.renderDayOfBirth}"&gt;
    &lt;tc:out value="#{address.dayOfBirth}"&gt;
      &lt;f:convertDateTime pattern="#{bundle.editorDatePattern}" /&gt;
    &lt;/tc:out&gt;
  &lt;/tc:column&gt;
&lt;/tc:sheet&gt;</programlisting>

      <para>The value attribute links to a list model in the controller
      providing the data for the sheet. The <literal>&lt;tc:sheet&gt;</literal> contains three
      <literal>&lt;tc:column&gt;</literal> tags which describe the columns of the sheet. The
      label of the column is rendered as a header cell. The <literal>var</literal> attribute
      inside <literal>&lt;tc:sheet&gt;</literal> defines a local variable <literal>address</literal>, which refers
      to a row in the data model and can be used in the definition of the
      columns.</para>

      <para><figure id="fig-list">
          <title>Address list</title>

          <graphic fileref="resources/list.png" />
        </figure></para>

      <para>In the example, each column uses a <literal>&lt;tc:out&gt;</literal> tag to render
      the data for the sheet cell by accessing the appropriate property of the
      row object. Instead of <literal>&lt;tc:out&gt;</literal> arbitrary input controls can be
      used like <literal>&lt;tc:in&gt;</literal>, <literal>&lt;tc:selectBooleanCheckbox&gt;</literal>, or
      <literal>&lt;tc:selectOneChoice&gt;</literal>.</para>

      <para>The various attributes of the sheet which start with 'show'
      configure the navigational elements of the sheet — <literal>showDirectLinks</literal> for
      example allows the user to directly jump to the desired page of the
      sheet.</para>

      <para>The <literal>state</literal> attribute refers to a <classname>SheetState</classname> object. Tobago binds
      information about the state of the sheet to this object — like which
      rows are selected. This allows the developer to react on the selection
      inside the business logic. In the address book example there is a
      toolbar above the sheet. The toolbar contains a delete action among
      others. This delete action is dependent on the selected rows in the
      sheet. The attribute <literal>selectable</literal> of the sheet controls the selection mode
      for the sheet. Possible values are <literal>none</literal>, <literal>single</literal>, and <literal>multi</literal>. The default
      value is <literal>multi</literal> and allows multiple rows to be selected. The following
      code fragment show the method bound to the delete button and describes
      how to access the selected rows:</para>

      <programlisting role="JAVA">public String deleteAddresses() {
  List&lt;Integer&gt; selection = selectedAddresses.getSelectedRows();
  if (selection.size() &lt; 1) {
    FacesMessage error 
        = new FacesMessage("Please select at least one address.");
    FacesContext.getCurrentInstance().addMessage(null, error);
    return null;
  }
  for (int i = selection.size() - 1; i &gt;= 0; i--) {
    Address address = currentAddressList.get(selection.get(i));
    addressDao.removeAddress(address);
  }
  // ...
  return OUTCOME_LIST;
}</programlisting>

      <para>The <literal>sortable</literal> attribute of the <literal>&lt;tc:column&gt;</literal> activates sorting
      for the related column. If the data for the sheet is a List or an array
      the data can be sorted implicitly. The <literal>sortActionListener</literal> attribute
      allows implementation of sorting in the business logic. The respective
      method binding has to point to a public action listener method which
      takes an <classname>ActionEvent</classname> as a parameter and returns <literal>void</literal>. The method will
      receive a <classname>SortActionEvent</classname>, which denotes the column triggering the sort
      event. However, information about the sort direction is contained in the
      <classname>SheetState</classname>.</para>
    </sect2>

    <sect2>
      <title>Tab Group Control</title>

      <para>The <literal>&lt;tc:tabGroup&gt;</literal> control renders different content on the
      same area of the view via tab panels. The switching behavior of the
      panels can be controlled with the <literal>switchType</literal> attribute. The panels can
      be switched on the client or the server. If the switching is performed
      on the server, Tobago can be instructed to only partially exchange the
      content of the page making use of Ajax. If the switching is done on the
      client it is faster, but the content of the page is bigger, because the
      rendering information of all tab panels has to be transferred to the
      client at once.</para>

      <programlisting role="XML">&lt;tc:tabGroup switchType="reloadTab" immediate="true"&gt;
  &lt;tc:tab label="#{bundle.editorTabPersonal}"&gt;
    &lt;jsp:include page="tab/personal.jsp"/&gt;
  &lt;/tc:tab&gt;

  &lt;tc:tab label="#{bundle.editorTabBusiness}" rendered="#{!controller.simple}"&gt;
    &lt;jsp:include page="tab/business.jsp"/&gt;
  &lt;/tc:tab&gt;

  &lt;tc:tab label="#{bundle.editorTabMisc}" rendered="#{!controller.simple}"&gt;
    &lt;jsp:include page="tab/misc.jsp"/&gt;
  &lt;/tc:tab&gt;
&lt;/tc:tabGroup&gt;</programlisting>

      <para>In the example application, two of the tab panels are only
      rendered if a certain condition is met in the controller. These
      particular tab panels are only rendered if the application is in the
      <emphasis>expert</emphasis> mode.</para>
    </sect2>

    <sect2>
      <title>Menu Control</title>

      <para>To mimic the appearance of a desktop application it is common to
      place a menu bar at the top of the page. This can be done with the
      <literal>&lt;tc:menuBar&gt;</literal> tag inside the <literal>menuBar</literal> facet of the <literal>&lt;tc:page&gt;</literal>.
      A menu bar can contain <literal>&lt;tc:menu&gt;</literal> tags, which can be nested to
      produce sub menus. Actions can be bound with method bindings to
      <literal>&lt;tc:menuCommand&gt;</literal> tags. A menu item can be disabled and can
      encapsulate icons. An underscore in the label marks the following
      character as an access key, which can be activated together with the <keycap>Alt</keycap> key.</para>

      <para>In the address book example the settings menu contains single
      selections created by <literal>&lt;tx:menuRadio&gt;</literal> to choose the current theme
      and language. Additionally it demonstrates how to use a check box menu
      item <literal>&lt;tx:menuCheckbox&gt;</literal> to change the mode of the
      application.</para>

      <programlisting role="XML">&lt;tc:menuBar id="menuBar"&gt;
  &lt;tc:menu label="_File"&gt;
    &lt;tc:menuCommand label="_New" action="#{controller.createAddress}" image
        ="image/org/tango-project/tango-icon-theme/16x16/actions/contact-new.png"/&gt;
    &lt;tc:menuCommand label="_Add Dummy Addresses"
        action="#{controller.addDummyAddresses}"/&gt;
    &lt;tc:menuSeparator/&gt;
    &lt;tc:menuCommand label="_Logout" image
        ="image/org/tango-project/tango-icon-theme/16x16/actions/system-log-out.png"/&gt;
  &lt;/tc:menu&gt;

  &lt;tc:menu label="_Settings"&gt;
    ...
    &lt;tc:menu label="_Theme"&gt;
      &lt;tx:menuRadio action="#{controller.themeChanged}"
          value="#{controller.theme}"&gt;
        &lt;f:selectItems value="#{controller.themeItems}"/&gt;
      &lt;/tx:menuRadio&gt;
    &lt;/tc:menu&gt;
    &lt;tx:menuCheckbox label="Simple _Mode" value="#{controller.simple}"/&gt;
  &lt;/tc:menu&gt;
  ...
&lt;/tc:menuBar&gt;</programlisting>
    </sect2>

    <sect2>
      <title>Tool Bar Control</title>

      <para>The <literal>&lt;tc:toolBar&gt;</literal> tag renders a group of buttons. The tool
      bar can be configured to render a textual description of the action or
      an icon in different standard sizes. The buttons are created with the
      <literal>&lt;tc:toolBarCommand&gt;</literal> tag, which is a slightly limited version of
      the standard button tag.</para>

      <programlisting role="XML">&lt;tc:toolBar iconSize="big"&gt;
  &lt;tc:toolBarCommand label="#{bundle.toolbarAddressList}" 
      action="#{controller.search}" immediate="true" image=
 "image/org/tango-project/tango-icon-theme/32x32/mimetypes/x-office-address-book.png"
      disabled="#{facesContext.viewRoot.viewId == '/application/list.jsp'}"/&gt;
  ...
&lt;/tc:toolBar&gt;</programlisting>

      <para>In the address book example the first toolbar button navigates to
      the address list. If the address list is already the current view the
      button is disabled. There is a naming convention to provide disabled
      versions for image resources by adding an additional <literal>Disabled</literal> before the
      file extension. The disabled version has to reside in the same folder as
      the original image. In the example the resource manager can find a black
      and white icon <filename>x-office-address-bookDisabled.png</filename> as a disabled version
      of the normal address book icon.</para>
    </sect2>

    <sect2>
      <title>Popups</title>

      <para>A popup is a small modal dialog, which is displayed in the context
      of the current page. A general use case for a popup is entering new data
      and confirming or canceling the new data. Popups can be activated by
      adding a <literal>popup</literal> facet to commands. Alternatively a popup can be activated
      programmatically by setting the <literal>rendered</literal> attribute to <constant>true</constant>. In this way
      you can use a popup as a message box.</para>

      <para>In the address book example the displayed columns for the address
      list can be controlled via a popup. This popup is bound to a button in
      the toolbar for the sheet.</para>

      <programlisting role="XML">&lt;tc:button label="Open Popup"&gt;
  &lt;f:facet name="popup"&gt;
    &lt;tc:popup width="300" height="270"&gt;
      &lt;tc:box label="Popup Title"&gt;
        ...
        &lt;tc:panel&gt;
          &lt;f:facet name="layout"&gt;
            &lt;tc:gridLayout columns="1fr fixed fixed"/&gt;
          &lt;/f:facet&gt;
          &lt;tc:panel/&gt;
          &lt;tc:button label="OK"&gt;
            <emphasis role="bold">&lt;tc:attribute name="popupClose" value="afterSubmit"/&gt;</emphasis>
          &lt;/tc:button&gt;
          &lt;tc:button label="Cancel"&gt;
            <emphasis role="bold">&lt;tc:attribute name="popupClose" value="immediate"/&gt;</emphasis>
          &lt;/tc:button&gt;
        &lt;/tc:panel&gt;
      &lt;/tc:box&gt;
    &lt;/tc:popup&gt;
  &lt;/f:facet&gt;
&lt;/tc:button&gt;</programlisting>

      <para>The typical semantics of the <emphasis>confirmation</emphasis>
        and <emphasis>cancel</emphasis> button can be
      controlled via a <literal>&lt;tc:attribute&gt;</literal> with the name <literal>popupClose</literal>. This
      attribute can have two different values: <literal>afterSubmit</literal> or <literal>immediate</literal>. Both
      buttons close the popup, but only the <literal>afterSubmit</literal> variant stores the
      entered data into the model.</para>
    </sect2>

    <sect2>
      <title>File Upload</title>

      <para>A file select control can be created with <literal>&lt;tc:file&gt;</literal>. The
      uploaded file is stored inside a <classname>FileItem</classname> object bound to the value
      attribute. The class <classname>FileItem</classname> is provided by <literal>commons-fileupload</literal>.</para>

      <para>The address book allows the user to store photographs associated
      with the contacts. The user can click on an empty image placeholder to
      open a popup with the file select control which is created by the
      following code fragment:</para>

      <programlisting role="XML">&lt;tc:file value="#{controller.uploadedFile}" required="true"&gt;
  &lt;tc:validateFileItem contentType="image/*"/&gt;
&lt;/tc:file&gt;</programlisting>

      <para>With the validator <literal>&lt;tc:validateFileItem&gt;</literal> the content type or
      maximum size of the uploaded file can be restricted. For security
      reasons the style of an HTML file select control (input field of type
      <literal>file</literal>) can only be customized in a very limited way. Therefore the input
      control for the file name and the upload button may not optimally fit to
      the theme.</para>

      <para>To handle multipart form data requests from the browser either the
      <classname>TobagoMultipartFormdataFilter</classname> servlet filter has to be configured in the
      <filename>web.xml</filename> or the <filename>tobago-fileupload.jar</filename> has to be added to the classpath.
      The address book demo uses the latter approach, which is based on a
      <classname>FacesContextFactory</classname> defined in the included <filename>faces-config.xml</filename> of the jar.
      The context factory can be configured with two different
      <literal>&lt;env-entry&gt;</literal> tags in the <filename>web.xml</filename> to control maximum upload limit
      and the directory for uploaded files. See the Javadoc of
      <classname>FileUploadFacesContextFactoryImpl</classname> for more information.</para>
    </sect2>
  </sect1>

  <sect1>
    <title>Layout Management</title>

    <para>The placement of components on a page is done with the help of a
    layout manager. The functionality of a layout manager is similar to those
    found in Swing. The standard layout manager for Tobago is
    <literal>&lt;tc:gridLayout&gt;</literal>. It can be bound to a container tag with a layout
    facet.</para>

    <para>The grid layout manager divides the area of the page into a
    rectangular grid. This grid can be controlled with the <literal>rows</literal> and <literal>columns</literal>
    attributes of the <literal>&lt;tc:gridLayout&gt;</literal> tag. The syntax is similar to the
    multi-length notation known from HTML<footnote><para>See <ulink url="http://www.w3.org/TR/html401/types.html#type-multi-length"/></para></footnote> and consists of a semicolon
    separated list of layout tokens.</para>

    <para>A layout token may be an absolute length in pixels like 100px, a
    percentage length like 50%, a relative length like 2* or * as a shorthand
    for 1*, or the value <literal>fixed</literal>. Relative lengths are served by the layout manager
    from the remaining available space, which is distributed proportionally
    based on the number before the *.</para>

    <para>If the layout manager has 400 pixels to lay out the columns with the
    following layout tokens 2*;*;100px, it first claims 100px for the third
    column and distributes the remaining 300 pixels in the ratio 2:1, ending
    up in 200 pixel for the first column and 100 pixels for the second column.
    The layout token <literal>fixed</literal> instructs the layout manager to take the required
    pixel size of the contained control. A <literal>&lt;tx:in&gt;</literal> control normally has
    a fixed height. To place multiple <literal>&lt;tx:in&gt;</literal> controls one below the
    other without superfluous spacing the layout manager can be instructed
    with <literal>fixed</literal> layout tokens to use exactly the required vertical space for a
    <literal>&lt;tx:in&gt;</literal>. For a more concrete example see the following code fragment
    based on the editor view of the address book:</para>

    <programlisting role="XML">&lt;tc:panel&gt;
  &lt;f:facet name="layout"&gt;
    &lt;tc:gridLayout columns="1fr" rows="fixed;fixed;fixed;*"/&gt;
  &lt;/f:facet&gt;
  &lt;tf:in ... /&gt;
  &lt;tf:in ... /&gt;
  &lt;tf:in rendered="#{! controller.simple}" ... /&gt;
  &lt;tf:textarea ... /&gt;
&lt;/tc:panel&gt;</programlisting>

    <para>The grid consists of one column and four rows. The first three rows
    use a fixed height which is implied by the theme and contained controls.
    The fourth row takes the remaining vertical space.</para>

    <para>One of the main reasons to use a layout manager is its ability to
    optimally manage the available space. The layout manager knows, for
    example, if controls have a fixed height and which can grow if there is
    enough space.</para>

    <para>Since the layout manager is targeted specifically at JSF it can
    flexibly react on the <literal>rendered</literal> attribute of components. If the address
    book application is in simple mode some of the components are not
    rendered. The layout manager automatically distributes the newly available
    space to the remaining dynamic components, which are laid out with
    relative or percentage lengths.</para>

    <para>If a control should utilize multiple adjacent grid cells, it can be
    wrapped with a <literal>&lt;tc:cell&gt;</literal> tag. With the <literal>spanX</literal> and <literal>spanY</literal> attributes of
    a <literal>&lt;tc:cell&gt;</literal> control the layout manager can be instructed to make the
    contained control span multiple cells in X and Y direction.</para>

    <para><figure id="fig-editor-simple">
        <title>Address editor in simple mode</title>

        <graphic fileref="resources/editor-simple.png" />
      </figure></para>
  </sect1>

  <sect1>
    <title>Themes</title>

    <para>Tobago allows the developer to specify the structure of a page.
    Additionally, the look of a page is controlled by the selected theme. A
    theme defines the colors, dimensions, behavior, and graphics of controls.
    Tobago comes with a selection of themes. These are Scarborough, Speyside,
    Charlotteville, and Richmond — named after settlements on Tobago.
    Scarborough is the basic theme which tries to directly rely on the
    standard features of HTML. Speyside is the main theme, where most
    development focus is targeted at. You will want to use this theme to start
    a new web application with. The remaining themes Charlotteville and
    Richmond are mainly variations of Speyside.</para>

    <informaltable frame="none" colsep="0" rowsep="0">
      <tgroup cols="2">
        <colspec colname="c1" colwidth="1fr"/>
        <colspec colname="c2" colwidth="1fr"/>
        <tbody>
          <row>
            <entry><para><figure id="fig-theme-speyside">
                <title>Theme Speyside</title>

                <graphic fileref="resources/theme-speyside.png" />
              </figure></para></entry>

            <entry><para><figure id="fig-theme-richmond">
                <title>Theme Richmond</title>

                <graphic fileref="resources/theme-richmond.png" />
              </figure></para></entry>
          </row>

          <row>
            <entry><para><figure id="fig-theme-charlotteville">
                <title>Theme Charlotteville</title>

                <graphic fileref="resources/theme-charlotteville.png" />
              </figure></para></entry>

            <entry><para><figure id="fig-theme-scarborough">
                <title>Theme Scarborough</title>

                <graphic fileref="resources/theme-scarborough.png" />
              </figure></para></entry>
          </row>
        </tbody>
      </tgroup>
    </informaltable>

    <para>Themes can be used to make an application follow the corporate
    design of a company or give the user the ability to change the look and
    feel of an application to their preferences. The address book example
    demonstrates how to make the theme selectable by the user. A select box
    displays the available themes, which are configured in the
    <filename>tobago-config.xml</filename> file, and a button triggers an action in the controller
    to set the theme in the Tobago <classname>ClientProperties</classname> object:</para>

    <programlisting role="JAVA">public String themeChanged() {
  FacesContext facesContext = FacesContext.getCurrentInstance();
  ClientProperties client 
      = VariableResolverUtil.resolveClientProperties(facesContext);
  client.setTheme(theme);
  return null;
}</programlisting>

    <sect2 id="sec-resource-management">
      <title>Resource Management</title>

      <para>For Tobago, resources are images, style sheets, scripts, and
      string resources. These resources can be dependent on the locale,
      browser, or the theme. The resource manager collects all resource
      locations. When a resource is requested, the resource manager determines
      the inclusion order. A resource can be available in different themes and
      multiple locales. The resource manager first looks under the selected
      theme with the used browser and locale. If the resource is not found,
      the fallback locale is used to continue the search. After all fallback
      locales are examined the fallback for the browser is used and the
      locales are searched again. After all fallback browsers are searched the
      fallback for the theme is used and the search starts again with the
      locales until all fallback themes are processed. The result is cached
      for later reuse.</para>

      <para>For resources such as images, the resource manager stops with the
      first match. For style sheets and scripts the resource manager returns a
      list of resources in the order they were found. This establishes a
      powerful defaulting mechanism.</para>

      <para>By relying on the resource manager the developer can provide
      localized images with different text values for a button. The locale of
      the view is used to determine the correct language version of the image.
      The resource manager supports the XML format for property files, easing
      the use of special characters in string resources. The evaluation of the
      theme in inclusion order can be used to support different corporate
      wordings. If each client has its own theme string resources for the
      different themes can arrange the words in different ways — for example:
      email, e-mail, or eMail.</para>

      <para>In the <filename>tobago-config.xml</filename> file, additional paths can be specified
      for inclusion by the resource manager. In this way you can add your own
      resources or even overwrite or extend existing resources. But changing
      existing themes this way may result in compatibility issues when
      switching to a newer version of Tobago, since the theme files are not
      stable yet and do not count as an official external API.</para>

      <programlisting role="XML">&lt;tobago-config&gt;
  &lt;theme-config&gt;
    &lt;default-theme&gt;speyside&lt;/default-theme&gt;
  &lt;/theme-config&gt;
  <emphasis role="bold">&lt;resource-dir&gt;tobago-resource&lt;/resource-dir&gt;</emphasis>
&lt;/tobago-config&gt;</programlisting>

      <para>The resource directory denotes a folder inside the WAR relative to
      the root. Paths for resources have to follow this pattern:</para>

      <programlisting>&lt;content-type&gt;/&lt;theme&gt;/&lt;browser&gt;/&lt;directory&gt;/&lt;resource-name&gt;(_&lt;locale&gt;)?.&lt;extension&gt;</programlisting>

      <para>Currently only <literal>html</literal> is supported as a content type, although the
      sandbox contains the beginnings for WML support. For the address book
      example there are two variants of an empty portrait with instructions
      how to upload a real portrait.</para>

      <programlisting>tobago-resource/html/standard/standard/image/empty-portrait.png
tobago-resource/html/standard/standard/image/empty-portrait_de.png</programlisting>

      <para>The first image is the default image with instructions in English.
      In the second image the instructions are localized in German. The first
      <literal>standard</literal> in the path denotes the fallback theme and the second <literal>standard</literal>
      represents the fallback browser. The <literal>directory</literal> part in the pattern
      stands for an arbitrary sub-path — in this example for the folder
      <literal>image</literal>.</para>
    </sect2>

    <sect2>
      <title>Adding Markup</title>

      <para>Several controls like <literal>&lt;tc:in&gt;</literal>, <literal>&lt;tc:panel&gt;</literal>, or
      <literal>&lt;tc:column&gt;</literal> support the markup attribute. It allows the developer
      to apply logical styles to a control. Which markup values are supported
      is defined per theme in the <filename>theme-config.xml</filename> file. If a theme does not
      define supported markup for a renderer, it inherits the markup from the
      fallback theme. The Standard theme defines <literal>number</literal> for <literal>&lt;tc:in&gt;</literal> and
      <literal>&lt;tc:out&gt;</literal>, and <literal>strong</literal> and <literal>deleted</literal> for <literal>&lt;tc:out&gt;</literal>. The markup
      <literal>number</literal> is usually used to format numbers right aligned, <literal>strong</literal> is used
      to emphasize content, and <literal>deleted</literal> marks text as no longer available
      normally by crossing it out. The visual representation of markup is up
      to the theme and therefore it will fit to the overall look and feel of
      the theme.</para>

      <para>To add new markup you can write your own theme. Choose the theme
      you want to extend and specify the selected theme as fallback theme. The
      Example theme extends Speyside and adds markup for columns.</para>

      <programlisting role="XML">&lt;tobago-theme&gt;
  &lt;name&gt;example&lt;/name&gt;
  &lt;resource-path&gt;org/apache/myfaces/tobago/renderkit&lt;/resource-path&gt;
  <emphasis role="bold">&lt;fallback&gt;speyside&lt;/fallback&gt;</emphasis>
  &lt;renderers&gt;
    &lt;renderer&gt;
      <emphasis role="bold">&lt;name&gt;Column&lt;/name&gt;
      &lt;supported-markup&gt;
        &lt;markup&gt;new&lt;/markup&gt;
      &lt;/supported-markup&gt;</emphasis>
    &lt;/renderer&gt;
  &lt;/renderers&gt;
&lt;/tobago-theme&gt;</programlisting>

      <para>To realize the visualization of the markup Tobago will add certain
      CSS style classes into the generated HTML for the marked control. The
      theme has to provide the styling information. The style class name
      results from the following naming rule "tobago-" +
      <literal>rendererName.toLower()</literal> + "-markup-" + <literal>markupName</literal>:</para>

      <programlisting>.tobago-sheet-cell-markup-new {
  background-color: yellow;
}</programlisting>

      <para>For the Example theme it was decided to render a new column (sheet-cell) with a
      yellow background.</para>

      <para>The address book example uses a different way to add markup. In
      this case three markup values — <literal>ok</literal>, <literal>warn</literal>, and <literal>error</literal> — are defined for
      the <literal>&lt;tc:progress&gt;</literal> control directly in the <filename>tobago-config.xml</filename> file.
      The administration area contains a progress bar to visualize the memory
      utilization of the virtual machine. Depending on the percentage value of
      the memory usage the business logic assigns different markup values for
      the progress bar to classify the state of the memory utilization.</para>

      <para><figure id="fig-progress">
          <title>Progress control with markup</title>

          <graphic fileref="resources/progress.png" />
        </figure></para>

      <para>The resource directory contains style sheets for visualizing the
      markup values as different background colors — green for <literal>ok</literal>, yellow for
      <literal>warn</literal>, and red for <literal>error</literal>. The Speyside theme for example is extended by
      the <filename>html/speyside/standard/style/style.css</filename> file.</para>
    </sect2>
  </sect1>

  <sect1>
    <title>Creating your own Tobago Control</title>

    <para>The ideal place to start when you want to create your own Tobago
    control is the sandbox. To access the sandbox you have to check it
    out:</para>

    <programlisting>svn checkout \ 
    http://svn.apache.org/repos/asf/myfaces/tobago/trunk/tobago-sandbox \
    tobago-sandbox</programlisting>

    <para>Alternatively if you have checked out the complete Tobago source
    tree you can find the sandbox directory right under the root directory. In
    this section we will create an HTML control in the sandbox as an example.
    The new control will be a slider for entering integer numbers.</para>

    <para>This control consists of a slider bar with an attached number input
    field. If you move the slider the number field is changed accordingly and
    vice versa. <xref linkend="fig-slider"/> shows a preview of the control. You can find the
    complete code in the Tobago sandbox.</para>

    <para><figure id="fig-slider">
        <title>Slider control for entering numbers</title>

        <graphic fileref="resources/slider.png" />
      </figure></para>

    <sect2>
      <title>The UI Component</title>

      <para>We are starting with the user interface component of the control
      and will name it:
      <classname>UINumberSlider</classname><footnote><para>See <ulink url="http://svn.apache.org/viewvc/myfaces/tobago/trunk/sandbox/src/main/java/org/apache/myfaces/tobago/component/UINumberSlider.java?view=markup"/></para></footnote>. Like all JSF
      components, Tobago components must extend
      <classname>UIComponent</classname><footnote><para>See <ulink url="http://java.sun.com/javaee/javaserverfaces/1.1_01/docs/api/javax/faces/component/UIComponent.html"/></para></footnote>. Because we want to create an input
      component we can extend <classname>UIInput</classname><footnote><para>See <ulink url="http://java.sun.com/javaee/javaserverfaces/1.1_01/docs/api/javax/faces/component/UIInput.html"/></para></footnote> which is a (non
      direct) subclass of <classname>UIComponent</classname>. The class <classname>UIInput</classname>
      is already an implementation of
      <classname>EditableValueHolder</classname><footnote><para>See <ulink url="http://java.sun.com/javaee/javaserverfaces/1.1_01/docs/api/javax/faces/component/EditableValueHolder.html"/></para></footnote> which saves us a lot of
      work.</para>

      <para>The JSF runtime environment needs the component type as an
      identifier for creating instances of components. Tobago components need
      to store this information in the component itself in the constant
      <constant>COMPONENT_TYPE</constant>. This constant is processed by the Tobago annotation
      visitor that is used in the build process to create the <filename>faces-config.xml</filename>
      file.</para>

      <para>We also implement some additional properties into our component:
      <literal>min</literal>, <literal>max</literal>, <literal>readonly</literal> and <literal>disabled</literal>. The property <literal>min</literal> specifies the smallest
      and the property <literal>max</literal> the largest number that can be entered. With the
      property <literal>readonly</literal> set the user cannot modify the value of the slider.
      The same is true for the property <literal>disabled</literal>. But in this case the
      complete control appears deactivated. All properties should be value
      binding enabled which makes their getters a little bit more complicated.
      To ensure that our component state is saved between requests we have to
      override the state holder methods of <classname>UIInput</classname>.</para>

      <para>The following code shows some parts of our component class:</para>

      <programlisting role="JAVA">public class UINumberSlider extends javax.faces.component.UIInput {

  public static final String COMPONENT_TYPE
      = "org.apache.myfaces.tobago.NumberSlider";

  private Boolean readonly;
  private Boolean disabled;
  private Integer min;
  private Integer max;

  public Boolean isReadonly() {
    if (readonly != null) {
      return readonly;
    }
    ValueBinding vb = getValueBinding(Attributes.READONLY);
    if (vb == null) {
      return false;
    } else {
      return (Boolean.TRUE.equals(vb.getValue(getFacesContext())));
    }
  }

  public void setReadonly(Boolean readonly) {
    this.readonly = readonly;
  }
  ...
  public void restoreState(FacesContext context, Object state) {...}
  public Object saveState(FacesContext context) {...}
}</programlisting>
    </sect2>

    <sect2>
      <title>The Renderer</title>

      <para>There are two ways in JSF to render a component. The first one is
      to implement the encoding and decoding between UI component and the view
      in the UI component directly. This is called the direct implementation
      programming model. The second method is to delegate the task to an
      appropriate renderer which is called the delegating programming model.
      The delegated programming model keeps your components independent from
      the view technology and is preferred for Tobago components.</para>

      <para>A renderer in JSF must be a subclass of type
      <classname>Renderer</classname><footnote><para>See <ulink url="http://java.sun.com/javaee/javaserverfaces/1.1_01/docs/api/javax/faces/render/Renderer.html"/></para></footnote>. For Tobago components this is different:
      their renderers must also implement the interface
      <classname>LayoutInformationProvider</classname><footnote><para>See <ulink url="http://myfaces.apache.org/tobago/apidocs/org/apache/myfaces/tobago/renderkit/LayoutInformationProvider.html"/></para></footnote> to get the
      renderer to work with the Tobago layout management. With this interface
      Tobago renderers provide the layout manager with certain information
      about the sizing of the component that is rendered. The required methods
      have a default implementation in the class
      <classname>LayoutableRendererBase</classname><footnote><para>See <ulink url="http://myfaces.apache.org/tobago/apidocs/org/apache/myfaces/tobago/renderkit/LayoutableRendererBase.html"/></para></footnote> which uses properties
      that are provided by the theme configuration of the used theme
      (<filename>tobago-theme-config.properties</filename>). We name our renderer
      <classname>NumberSliderRenderer</classname> and extend from <classname>LayoutableRendererBase</classname>. Following the
      Tobago naming convention the renderer must end with "Renderer".</para>

      <para>When using the <classname>LayoutableRendererBase</classname> the theme configuration is a good
      place to provide the information needed for the layout. The
      implementation searches the configuration for properties with the
      following pattern: <literal>renderer name without "Renderer"</literal> + "." + <literal>key</literal>. All
      values are interpreted as pixels. <xref linkend="table-rendererbase"/> specifies some of the
      recognized keys.</para>

      <table frame="none" id="table-rendererbase" colsep="0" rowsep="0">
        <title>Recognized keys for LayoutableRendererBase</title>
        <tgroup cols="2">
          <colspec colname="c1" colwidth="18pc"/>
          <colspec colname="c2" colwidth="18pc"/>
          <thead>
            <row rowsep="1">
              <entry>Key</entry>
              <entry>Description</entry>
            </row>
          </thead>
          <tbody>
            <row>
              <entry><literal>fixedWidth</literal>, <literal>fixedHeight</literal></entry>
              <entry><para>This is the preferred and normal size of a
      control. It is used if the value fixed is specified within the layout
      properties of a layout manager.</para></entry>
            </row>
            <row>
              <entry><literal>paddingWidth</literal>, <literal>paddingHeight</literal></entry>
              <entry>The padding attributes add empty space
      between the control and its surroundings.</entry>
            </row>
            <row>
              <entry><literal>headerHeight</literal></entry>
              <entry>Some controls like the &lt;tc:box&gt; control use this
      property to specify extra space for their header.</entry>
            </row>
          </tbody>
        </tgroup>
      </table>

      <para>If <classname>LayoutableRendererBase</classname> does not find a value for a renderer it searches
      for default properties: "Tobago." + <literal>key</literal>. We could (but will not)
      specify a width padding of five pixels for our control by adding the
      property <literal>NumberSlider.paddingWidth=5</literal> in the theme configuration of
      the sandbox theme. Please note that the resource location mechanism as
      described in <xref linkend="sec-resource-management"/> is used to find a
      property.</para>

      <para>The Tobago theme configuration is not only used by <classname>RendererBase</classname>,
      but properties of own renderers can be specified there. For example we
      define the percentage of the width of the slider of our control in the
      <filename>tobago-theme-config.xml</filename>: <literal>NumberSlider.sliderWidthPercent=66</literal>. This
      means the slider gets 66 percent of the width of our control and the
      input field 34 percent. The value can be accessed in the renderer with
      the following line of code:</para>

      <para><programlisting role="JAVA">int sliderWidthPercent
    = ThemeConfig.getValue(facesContext, component, "sliderWidthPercent");</programlisting></para>

      <para>The Tobago theming mechanism locates renderers by their location
      in the package structure. Normally all Tobago renderers are located
      under the root package <literal>org.apache.myfaces.tobago.renderkit</literal>. Below this,
      the location depends on the output technology, the theme and
      browser.</para>

      <para>We use the sub package <literal>html.sandbox.standard.tag</literal> because we are
      writing an HTML control for the sandbox theme. Package <literal>standard</literal> means
      that all browsers (Mozilla, Internet Explorer etc.) will be served by
      this renderer. The last package <literal>tag</literal> is obligatory for historical
      reasons.</para>

      <para>The code for encoding/decoding in the renderer is quite long so
      only some interesting fragments are shown in code snippet. All encoding
      is done in the method <literal>encodeEnd</literal>. First the properties of the component
      are retrieved. Then the response writer is used to generate the HTML
      input field of our control. The response writer for Tobago components is
      the <classname>TobagoResponseWriter</classname><footnote><para>See <ulink url="http://myfaces.apache.org/tobago/apidocs/org/apache/myfaces/tobago/webapp/TobagoResponseWriter.html"/></para></footnote> which is
      created by the Tobago render kit. It provides the component developer
      with additional convenience methods and handles escaping. The decoding
      is done in the method <literal>decode</literal> and retrieves the value of the input field
      back from the HTTP request.</para>

      <example><title>Renderer for the slider bar control</title>
      <programlisting role="JAVA">package org.apache.myfaces.tobago.renderkit.html.sandbox.standard.tag;

public class NumberSliderRenderer extends LayoutableRendererBase {

  public void encodeEnd(FacesContext facesContext, UIComponent component)
      throws IOException {
    String currentValue = getCurrentValue(facesContext, component);
    boolean readonly
        = ComponentUtil.getBooleanAttribute(component, Attributes.READONLY);
    boolean disabled
        = ComponentUtil.getBooleanAttribute(component, Attributes.DISABLED);
    TobagoResponseWriter writer
        = HtmlRendererUtil.getTobagoResponseWriter(facesContext);
    ...
    writer.startElement(HtmlElements.INPUT);
    String inputIdAndName = getIdForInputField(facesContext, component);
    writer.writeNameAttribute(inputIdAndName);
    writer.writeIdAttribute(inputIdAndName);
    if (currentValue != null) {
      writer.writeAttribute(HtmlAttributes.VALUE, currentValue, false);
    }
    writer.writeAttribute(HtmlAttributes.READONLY, readonly);
    writer.writeAttribute(HtmlAttributes.DISABLED, disabled);
    writer.endElement(HtmlElements.INPUT);
    ...
  }

  public void decode(FacesContext context, UIComponent component) {
    UIInput uiInput = (UIInput) component;
    ...
    String inputId = getIdForInputField(context, component);
    Map requestParameterMap
        = context.getExternalContext().getRequestParameterMap();
    if (requestParameterMap.containsKey(inputId)) {
      String newValue = (String) requestParameterMap.get(inputId);
      uiInput.setSubmittedValue(newValue);
    }
  }

  private String getIdForInputField(
        FacesContext context, UIComponent component) {...}
}</programlisting></example>

      <para>When the HTML output in the renderer is generated the question how
      to size the elements arises. It is not a good idea to hard code static
      width or height information because the layout manager determines how
      much space the control should occupy. But how can a renderer know how
      much space it should use?</para>

      <para>Tobago creates a "style map" for each component and adds it to the
      components attributes. This style map contains values for the width and
      the height of the control determined by the layout manager. In the
      renderer this map can be accessed and the values can be taken into
      account when creating HTML elements. The following source snippet
      demonstrates the usage of the style map.</para>

      <programlisting role="JAVA">HtmlStyleMap style = (HtmlStyleMap) component.getAttributes().get("style");
Measure width = style.getWidth();</programlisting>
    </sect2>

    <sect2>
      <title>The Tag and the Tag Declaration</title>

      <para>All JSF implementations must support JSP as page description
      language for JSF pages. This is also standard for writing Tobago pages.
      A different view technology that does not depend on JSP is also
      available — Facelets. To allow an author to use our control we need to
      define a JSP tag — a custom action. This is done by writing one class
      and one interface: the tag class itself and a tag declaration interface
      which is Tobago specific.</para>

      <para>We start with the tag class. All JSP custom actions in JSF that
      correspond to a UI component in the component tree must either subclass
      <classname>UIComponentTag</classname><footnote><para>See <ulink url="http://java.sun.com/javaee/javaserverfaces/1.1_01/docs/api/javax/faces/webapp/UIComponentTag.html"/></para></footnote> or
      <classname>UIComponentBodyTag</classname><footnote><para>See <ulink url="http://java.sun.com/javaee/javaserverfaces/1.1_01/docs/api/javax/faces/webapp/UIComponentBodyTag.html"/></para></footnote> depending on whether they need
      support for body content functionality or not. Our action has no body
      content so we want to subclass <classname>UIComponentTag</classname>. Again there is an
      opportunity to save some effort if we extend from
      <classname>TobagoTag</classname><footnote><para>See <ulink url="http://myfaces.apache.org/tobago/apidocs/org/apache/myfaces/tobago/internal/taglib/component/TobagoTag.html"/></para></footnote> which extends from
      <classname>UIComponentTag</classname>. This class already implements the handling for the
      properties <literal>readonly</literal> and <literal>disabled</literal>.</para>

      <para>Our tag is named
      <classname>NumberSliderTag</classname><footnote><para>See <ulink url="http://svn.apache.org/viewvc/myfaces/tobago/trunk/sandbox/src/main/java/org/apache/myfaces/tobago/internal/taglib/sandbox/NumberSliderTag.java?view=markup"/></para></footnote> and
      consists of four new properties (<literal>min</literal>, <literal>max</literal>, <literal>value</literal> and
      <literal>valueChangeListener</literal>) with their getter/setters, an implementation of
      <literal>getComponentType</literal>, a <literal>release</literal> method and a <literal>setProperties</literal> method.</para>

      <para>Tag classes in Tobago are dumb gateways between the view
      technology (JSP) and the render independent UI component. No output
      should be generated in the JSP tag directly. This is done only in
      appropriate renderers. The advantage with this approach is that we can
      use a different view technology like Facelets without changing our
      code.</para>

      <para>Next thing is the declaration of the tag. Therefore it implements
      an interface
      <classname>NumberSliderTagDeclaration</classname><footnote><para>See <ulink url="http://svn.apache.org/viewvc/myfaces/tobago/trunk/sandbox/src/main/java/org/apache/myfaces/tobago/internal/taglib/sandbox/NumberSliderTagDeclaration.java?view=markup"/></para></footnote>.
      This interface describes our tag and its attributes with annotations.
      Tobago's build process uses this declaration to generate a
      <filename>faces-config.xml</filename> and a tag library description (TLD) for our component
      with the help of the annotation processing tool (apt). The interface is
      annotated with a <classname>@Tag</classname> annotation with a name attribute. The specified
      value "numberSlider" is the name of the JSP tag. The next annotation
      <classname>@UIComponentTag</classname> makes it clear that the tag belongs to a component with
      an associated renderer. The attributes <literal>rendererType</literal> and <literal>uiComponent</literal>
      specify the type of the renderer and the class of the UI component.
      Please note that the Tobago render kit will add the suffix "Renderer" to
      the renderer type to find a matching renderer class.</para>

      <para>After the interface, the properties that are defined for the tag
      are annotated. By convention, the setter of the property is used. The
      <classname>@TagAttribute</classname> annotation describes a property that is part of the JSP
      tag. The <classname>@UIComponentTagAttribute</classname> annotation specifies a component
      property. Our properties appear in both the tag and the component. With
      the additional annotation attribute <literal>type</literal> we define the type of the
      properties.</para>

      <para>Tobago has many predefined tag attribute declarations. We make use
      of them by extending the needed interfaces like <classname>IsReadonly</classname> or
      <classname>HasValue</classname>:</para>

    <example><title>Tag declaration for the slider bar tag</title>
      <programlisting role="JAVA">@Tag(name = "numberSlider")
@UIComponentTag(rendererType = "NumberSlider",
    uiComponent = "org.apache.myfaces.tobago.component.UINumberSlider")
public interface NumberSliderTagDeclaration extends
  HasIdBindingAndRendered, IsReadonly, IsDisabled,
  HasValue, HasValueChangeListener {
  
  @TagAttribute()
  @UIComponentTagAttribute(type="java.lang.Integer", defaultValue="0")
  void setMin(String min);

  @TagAttribute()
  @UIComponentTagAttribute(type="java.lang.Integer", defaultValue="100")
  void setMax(String max);
}</programlisting></example>
    </sect2>

    <sect2>
      <title>Building and Using the Control</title>

      <para>After performing all four steps that are needed to create a Tobago
      control (UI component, renderer, tag and tag declaration) we are ready
      to build. This is done with a simple mvn install in the <emphasis>sandbox</emphasis>
      directory; the classes are compiled, the <filename>faces-config.xml</filename> and the tag
      library description is generated, everything is packaged and stored in
      the target directory. Depending on the Tobago version the package is
      called something like <filename>tobago-sandbox-i.j.k.jar</filename>. When this jar file is
      put into the classpath of a web application, the control can be used on
      a JSP page. It is important to switch to the Sandbox theme in the Tobago
      configuration.</para>

      <programlisting role="XML">&lt;%@ taglib uri="http://myfaces.apache.org/tobago/sandbox" prefix="tcs" %&gt;
&lt;%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %&gt;
&lt;f:view&gt;
  ...
  &lt;tcs:numberSlider value="#{controller.value}" min="0" max="200"/&gt;
  ...
&lt;/f:view&gt;</programlisting>
    </sect2>

    <sect2>
      <title>Things under the Hood</title>

      <para>We have not talked about the HTML layout of the control. There is
      a significant amount of work required for layouts when creating new
      Tobago controls, particularly with regard to browser compatibility and
      using Ajax. Additionally — there is also individual coding for every new
      control. Everything covered so far deals with aspects that are common to
      all Tobago component development.</para>

      <para>The Tobago theming mechanism is not the only aspect that locates
      renderers with a predefined pattern. Almost everything (styles, images,
      scripts and properties) is organized within a tree structure and located
      in a similar way.</para>
    </sect2>
  </sect1>

  <sect1>
    <title>Security</title>

    <para>To enable security for a Tobago application you can either write
    your own login mechanism or use the standard way provided by the servlet
    specification. The later way has a small drawback because the name
    attribute for an HTML input control normally cannot be controlled via JSF
    or Tobago. For form based authentication the servlet specification
    requires the input fields of a login dialog to have the names <literal>j_username</literal>
    and <literal>j_password</literal>, respectively. Since we cannot influence the names of
    <literal>&lt;tc:in&gt;</literal> controls directly we have to resort to a hack. We
    subsequently change the rendered field names with JavaScript inside the
    browser.</para>

    <programlisting role="XML">&lt;tx:in id="j_username" label="Username"/&gt;
&lt;tx:in id="j_password" password="true" label="Password"/&gt;

...

&lt;tc:script onload="initLoginForm();"&gt;
  function initLoginForm() {
    var user = document.getElementById("page:j_username");
    user.name = "j_username";
    var pass = document.getElementById("page:j_password");
    pass.name = "j_password";
    var form = document.getElementById("page::form");
    form.action 
        = "${pageContext.request.contextPath}/j_security_check";
  }
&lt;/tc:script&gt;</programlisting>

    <para>The <literal>onload</literal> attribute instructs Tobago to execute the passed
    JavaScript function after the HTML page was loaded.</para>

    <para>Tobago provides an extension package <literal>tobago-security</literal> to secure
    method bindings with annotations. Currently it is not sufficient to
    include the jar in the classpath, since the order in which the
    <filename>faces-config.xml</filename> files from libraries in the classpath are evaluated is
    depending on the JSF implementation. The <filename>faces-config.xml</filename> file of
    <literal>tobago-security</literal> defines alternatives for command components with security
    handling. The easiest way is to copy the component redefinitions into the
    <filename>faces-config.xml</filename> file of the web application.</para>

    <para>With the <literal>tobago-security</literal> package a method can be marked with
    <classname>@RolesAllowed</classname> to designate the necessary roles for a business
    functionality. The method binding will only be evaluated if the user has
    the appropriate role. Likewise the class can be marked with <classname>@RolesAllowed</classname>
    to secure all methods. In the address book example the <emphasis>Admin</emphasis> toolbar
    button points to a method in the <classname>AdminController</classname>. This method is annotated
    with the required role <emphasis>admin</emphasis>:</para>

    <programlisting role="JAVA">@RolesAllowed("admin")
public String admin() {
  return OUTCOME_ADMIN;
}</programlisting>

    <para>If the user of the application has not the role <emphasis>admin</emphasis> the button is
    disabled and the method binding will not be evaluated. Additionally the
    annotations <classname>@DenyAll</classname> and <classname>@PermitAll</classname> are supported. These security
    annotations are part of the Common Annotations specification
    (JSR250.)</para>
  </sect1>

  <sect1>
    <title>Virtual Forms</title>

    <para>The <literal>&lt;tc:page&gt;</literal> tag acts as a global form. Therefore, for simple
    pages without control dependencies no explicit form has to be used. The
    <literal>&lt;tc:form&gt;</literal> control allows nesting of forms and creates dependencies
    between controls.</para>

    <para>If a form is submitted only the contained model references are
    updated, other values are temporarily stored. With <literal>&lt;tc:form&gt;</literal> partial
    validation can be realized, because validation is limited to controls
    inside a <literal>&lt;tc:form&gt;</literal>. As a result sub forms provide an alternative to
    <literal>immediate</literal> for input controls. In the address book example changes to the
    theme and the language are isolated to sub forms to avoid conflicts with
    validations elsewhere on the page:</para>

    <programlisting role="XML">&lt;tc:form&gt;
  &lt;tx:selectOneChoice label="Theme" value="#{controller.theme}"&gt;
  &lt;f:selectItems value="#{controller.themeItems}" /&gt;
    &lt;f:facet name="change"&gt;
      &lt;tc:command action="#{controller.themeChanged}"/&gt;
    &lt;/f:facet&gt;
  &lt;/tx:selectOneChoice&gt;
&lt;/tc:form&gt;</programlisting>
  </sect1>

  <sect1>
    <title>Partial Rendering</title>

    <para>To avoid the reloading of complete pages, Tobago has a
    <literal>renderedPartially</literal> attribute to update only parts of the page. For
    <literal>&lt;tc:tabGroup&gt;</literal> controls this can be achieved by configuring the
    switching type to <literal>reloadTab</literal>. Tobago also supports a more generic way to
    update container controls like <literal>&lt;tc:panel&gt;</literal>, <literal>&lt;tc:box&gt;</literal>,
    <literal>&lt;tc:popup&gt;</literal>, or <literal>&lt;tc:sheet&gt;</literal> using <literal>&lt;tc:attribute&gt;</literal> with the
    name <literal>renderedPartially</literal> and a value with a comma separated list of
    identifier paths of the respective containers. An identifier path is a
    colon separated list of ids of nested naming containers. An absolute path
    of ids has to begin with a colon character followed by the id of the
    <literal>&lt;tc:page&gt;</literal> control. If the path does not start with a colon it is a
    relative path from the current naming container. By using multiple colon
    characters at the beginning of the path parent naming containers can be
    accessed. The action of the command has to return null as an outcome,
    because the current view has to be used again. Only a sub-tree of the view
    is updated.</para>

    <para>The following code fragment shows a simple example where an input
    control is enabled depending on the state of a checkbox.</para>

    <programlisting role="XML">&lt;tc:page id="page"&gt;
  &lt;tc:box label="Container" id="box"&gt;
    &lt;tx:selectBooleanCheckbox label="Enable" 
        value="#{controller.miscEnabled}"&gt;
      &lt;f:facet name="change"&gt;
        &lt;tc:command&gt;
          <emphasis role="bold">&lt;tc:attribute name="renderedPartially" value=":page:box"/&gt;</emphasis>
        &lt;/tc:command&gt;
      &lt;/f:facet&gt;
    &lt;/tx:selectBooleanCheckbox&gt;

    &lt;tx:in label="Misc." disabled="#{!controller.miscEnabled}"/&gt;
  &lt;/tc:box
&lt;/tc:page&gt;</programlisting>

    <para>Instead of reloading the whole page, only the surrounding container
    <literal>&lt;tc:box&gt;</literal> of the <literal>&lt;tx:in&gt;</literal> control is updated, if the value of
    the checkbox changes. The absolute id path of the box, which should be
    updated, is set as <literal>renderedPartially</literal> attribute of the command.</para>

    <para>Additionally, <literal>&lt;tc:panel&gt;</literal> controls can be reloaded on a regular
    basis to be able to display changes over time. To accomplish this, the
    panel has to be provided with a <literal>reload</literal> facet. This facet has to contain a
    <literal>&lt;tc:reload&gt;</literal> tag to specify the frequency for the reload in
    milliseconds.</para>

    <programlisting role="XML">&lt;tc:panel&gt;
  &lt;f:facet name="reload"&gt;
    <emphasis role="bold">&lt;tc:reload frequency="5000"/&gt;</emphasis>
  &lt;/f:facet&gt;
  ...
&lt;/tc:panel&gt;</programlisting>

    <para>The address book uses the reload facility on an administration page
    to regularly display the memory utilization of the virtual machine.</para>
  </sect1>

  <sect1 id="sec-advanced-assembly">
    <title>Advanced Assembly</title>

    <para>As described in the <xref linkend="sec-getting-started"/>, themes can be served
    directly out of the theme jars with the help of a special servlet.
    Generally streaming static resources poses a slight overhead, but using
    the servlet also provides a simple way to define HTTP expire headers for
    the static resources. The expiration period can be specified in seconds as
    an <literal>init-param</literal> for the servlet.</para>

    <programlisting role="XML">&lt;servlet&gt;
  &lt;servlet-name&gt;ResourceServlet&lt;/servlet-name&gt;
  &lt;servlet-class&gt;
     org.apache.myfaces.tobago.servlet.ResourceServlet&lt;/servlet-class&gt;
  &lt;init-param&gt;
    <emphasis role="bold">&lt;param-name&gt;expires&lt;/param-name&gt;
    &lt;param-value&gt;14400&lt;/param-value&gt;</emphasis>
  &lt;/init-param&gt;
&lt;/servlet&gt;</programlisting>

    <para>Instead of streaming the resources with a servlet they can be
    unpacked and supplied by the servlet container directly. Alternatively a
    web server like the Apache HTTP server can be set up in front of the
    servlet container. The web server can intercept the URLs for the static
    resources and serve them instead of the servlet container. If the themes
    are unpacked, only the resources should be unpacked not the class files or
    property files. But the jars still have to be put into the classpath in
    order to provide the necessary implementation files for the theme.</para>

    <para>Besides the MyFaces JSF implementation Tobago also works with other
    JSF implementations like the reference implementation (RI) from Sun. The
    POM for the address book example provides three profiles for different JSF
    implementations. The default is MyFaces. There is an additional profile
    for the SUN RI. The third profile assumes that the container provides an
    implementation for JSF.</para>
  </sect1>

  <sect1>
    <title>Summary</title>

    <para>Tobago allows developing rich web applications with a rich set of
    controls. The development is easy and independent of the view technology.
    Nevertheless the web application makes use of technologies like Ajax
    without making any effort. The ease of development enables Tobago to be
    used for rapid prototyping, because the views can be designed without the
    need to program any lines of Java code.</para>

    <para>In the near future the tree from the sandbox will become part of the
    standard Tobago distribution and you can expect more useful controls to
    follow. With MyFaces focusing on fulfilling the JSF specification 1.2
    Tobago will aim for JSF 1.2 compatibility as well. Another goal is to
    attain a form of integration with other component sets like Tomahawk.
    Currently adding such controls to a Tobago application works only limited,
    partly because there is no way to add the necessary layout and theming
    information for external controls.</para>
  </sect1>
</article>