diff --git a/src/site/xdoc/install_alpha_1.xml b/src/site/xdoc/install_alpha_1.xml
deleted file mode 100644
index 5d52441..0000000
--- a/src/site/xdoc/install_alpha_1.xml
+++ /dev/null
@@ -1,160 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1" ?>
-<!--
-    Licensed to the Apache Software Foundation (ASF) under one
-    or more contributor license agreements.  See the NOTICE file
-    distributed with this work for additional information
-    regarding copyright ownership.  The ASF licenses this file
-    to you under the Apache License, Version 2.0 (the
-    "License"); you may not use this file except in compliance
-    with the License.  You may obtain a copy of the License at
-
-    http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing,
-    software distributed under the License is distributed on an
-    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-    KIND, either express or implied.  See the License for the
-    specific language governing permissions and limitations
-    under the License.
-
--->
-<document>
-    <properties>
-        <title>Installation of the MyFaces Ext-Scripting Alpha 1 "Release"</title>
-    </properties>
-
-    <section name="General Information">
-        <p>
-            Ext-Scripting is currently still in Alpha stage, so no official release has been done,
-            only a semi official 1.0-Alpha release. Since then, a lot of simplification work on the
-            dependency side has been done.
-        </p>
-        This page gives detailed instructions on how to use the Alpha-1.
-        <p>
-            However we would recommend to use the latest codebase or one of the upcoming beta releases
-            since lots of bug fixes have went into the codebase.
-        </p>
-    </section>
-    <section name="Setup using Apache Maven2">
-        <subsction name="Download Location">
-            <p>
-                The release build is hosted and signed in an inofficial repository hosted under
-                http://people.apache.org/~lu4242/extscript100alpha
-            </p>
-            <p>
-                You simply have to add following code to your maven pom.xml to be able to use the alpha
-                jars:
-                <source><![CDATA[
-<repositories>
-  <repository>
-         <id>ext-scripting.alpha1</id>
-         <name>Maven Repository for myfaces Ext-Scripting Alpha 1</name>
-         <url>http://people.apache.org/~lu4242/extscript100alpha/</url>
-        <layout>default</layout>
-  </repository>
-<repositories>
-                ]]></source>
-            </p>
-        </subsction>
-        <subsction name="Maven Dependencies">
-            <p>
-                If you want to use Ext-Scripting Alpha 1 in your own project,
-                you will have to add several dependencies to your pom.xml
-                (note a lot of simplification has been done in this area post Alpha-1)
-
-            </p>
-            <p>
-                Depending on your working environment the configuration can vary!
-            </p>
-
-            <h4>Core</h4>
-            <p>All configurations definitely need our core jar</p>
-            <source><![CDATA[
-<dependency>
-    <groupId>org.apache.myfaces.extension-scripting</groupId>
-    <artifactId>core</artifactId>
-    <version>1.0-ALPHA-1</version>
-</dependency>
-                ]]></source>
-
-
-            <h4>Java6</h4>
-            <p>If you are in a Java-6 environment you will definitely have to add following section to your pom.xml.</p>
-            <source><![CDATA[
-<dependency>
-    <groupId>org.apache.myfaces.extension-scripting</groupId>
-    <artifactId>core-java6</artifactId>
-    <version>1.0-ALPHA-1</version>
-</dependency>
-                ]]></source>
-            <h4>MyFaces Version</h4>
-            <p>Depending on your MyFaces version, you either have to add the 1.2 extension or the 2.0 extension to your
-                pom.xml.
-            </p>
-
-            <p>
-                <b>For Myfaces 1.2.8+</b>
-            </p>
-
-            <source><![CDATA[
-<dependency>
-    <groupId>org.apache.myfaces.extension-scripting</groupId>
-    <artifactId>myfaces12-extensions</artifactId>
-    <version>1.0-ALPHA-1</version>
-</dependency>
-                ]]></source>
-
-            <p>
-                <b>For Myfaces 2.0</b>
-            </p>
-
-
-            <source><![CDATA[
-<dependency>
-    <groupId>org.apache.myfaces.extension-scripting</groupId>
-    <artifactId>myfaces2-extensions</artifactId>
-    <version>1.0-ALPHA-1</version>
-</dependency>
-                ]]></source>
-
-            <p>
-                <b>For Myfaces 2.0</b>
-            </p>
-            <p>Following image gives a quick overview over the modules you can use for your respective configuration:
-            </p>
-
-            <img src="images/alpha_1_depgraph.jpg"  width="511px" height="434px"   />
-        </subsction>
-        <section name="Setup by hand">
-            <p>As of writing there is no bundle for a manual install available, but the installation
-            is almost identical to the maven installation</p>
-            <p>Since Ext-Scripting uses almost the same dependencies as MyFaces you only just have to add
-            the Ext-Scripting jars + a valid Groovy-All.jar (1.7.x or higher) + Objectwebs ASM 3.2</p>
-
-            <p>Following download Links are available to download all dependencies</p>
-
-            <ul>
-                <li><a href="http://people.apache.org/~lu4242/extscript100alpha/org/apache/myfaces/extension-scripting/core/1.0-ALPHA-1/core-1.0-ALPHA-1.jar">Ext Scripting Alpha 1 Core</a></li>
-                <li><a href="http://people.apache.org/~lu4242/extscript100alpha/org/apache/myfaces/extension-scripting/core-java6/1.0-ALPHA-1/core-java6-1.0-ALPHA-1.jar">Ext Scripting Alpha 1 Core Java6</a></li>
-                <li><a href="http://people.apache.org/~lu4242/extscript100alpha/org/apache/myfaces/extension-scripting/myfaces12-extensions/1.0-ALPHA-1/myfaces12-extensions-1.0-ALPHA-1.jar">Ext Scripting MyFaces 1.2 Extensions</a></li>
-                <li><a href="http://people.apache.org/~lu4242/extscript100alpha/org/apache/myfaces/extension-scripting/myfaces20-extensions/1.0-ALPHA-1/myfaces20-extensions-1.0-ALPHA-1.jar">Ext Scripting MyFaces 2.0 Extensions</a></li>
-                <li><a href="http://repository.codehaus.org/org/codehaus/groovy/groovy-all/1.7.1/groovy-all-1.7.1.jar">Groovy-All.jar</a></li>
-                <li><a href="http://repo1.maven.org/maven2/asm/asm/3.2/asm-3.2.jar">ASM.jar</a></li>
-            </ul>
-
-            <p>Note some of the dependencies will be included directly in your bundle jar in later builds</p>
-
-        </section>
-        <section name="Kickstarting via an Example Web Application">
-            <p>Ext-Scripting provides two sample web applications for testing and kickstarting an application.
-            Both can be found under following links and can be dropped into a servlet container (note that the MyFaces 2.0 example requires a servlet 2.5+ container)</p>
-            <ul>
-                <li><a href="http://people.apache.org/~lu4242/extscript100alpha/org/apache/myfaces/extension-scripting/myfaces12-example/1.0-ALPHA-1/myfaces12-example-1.0-ALPHA-1.war">Ext Scripting Alpha 1 Example for MyFaces 1.2</a></li>
-                <li><a href="http://people.apache.org/~lu4242/extscript100alpha/org/apache/myfaces/extension-scripting/myfaces20-example/1.0-ALPHA-1/myfaces20-example-1.0-ALPHA-1.war">Ext Scripting Alpha 1 Example for MyFaces 2.0</a></li>
-            </ul>
-        </section>
-
-
-    </section>
-
-</document>
\ No newline at end of file
diff --git a/src/site/xdoc/install_beta_1.xml b/src/site/xdoc/install_beta_1.xml
deleted file mode 100644
index c853895..0000000
--- a/src/site/xdoc/install_beta_1.xml
+++ /dev/null
@@ -1,259 +0,0 @@
-<?xml version="1.0" encoding="ISO-8859-1" ?>
-<!--
-    Licensed to the Apache Software Foundation (ASF) under one
-    or more contributor license agreements.  See the NOTICE file
-    distributed with this work for additional information
-    regarding copyright ownership.  The ASF licenses this file
-    to you under the Apache License, Version 2.0 (the
-    "License"); you may not use this file except in compliance
-    with the License.  You may obtain a copy of the License at
-
-    http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing,
-    software distributed under the License is distributed on an
-    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-    KIND, either express or implied.  See the License for the
-    specific language governing permissions and limitations
-    under the License.
-
--->
-<document>
-    <properties>
-        <title>Installation</title>
-    </properties>
-
-    <body>
-        <section name="Navigation Top">
-            <a href="index.html">&lt;&lt;Back to the Start Page</a>
-            or
-
-            <a href="using_general.html">On to the General Users Guide&gt;&gt;</a>
-        </section>
-
-        
-
-
-        <section name="Checkout and Build">
-            <p>
-               A manual build for beta-1 is not necessary you always can obtain the needed files
-                via Maven(see below) or you can download them manually and have the integrated
-                manually (also see below), however if you prefer a build from source
-                you can follow the explanations presented here:
-                You can download the sources of the Ext-Scripting Beta-1 from:
-                The beta 1 tag <a href="http://svn.apache.org/repos/asf/myfaces/extensions/scripting/tags/1_0_beta_1">
-                    http://svn.apache.org/repos/asf/myfaces/extensions/scripting/tags/1_0_beta_1
-                </a>
-            </p>
-            <p>
-                Make sure you have following requirements fulfilled before checking out:
-            </p>
-            <ul>
-                <li>A valid Subversion client</li>
-                <li>Java 5 or higher</li>
-                <li>Maven 2.0.9 or higher</li>
-            </ul>
-            <p>
-                After checkout, a full build can be obtained from the root directory of your checkout via<b>mvn
-                clean install</b>.
-            </p>
-            <p>
-                Once finished, a valid build is installed, which can be used further on. Additionally you can find
-                two blueprint projects which you can use as starting points for your own projects under
-                <b>&lt;checkoutDir&gt;/examples</b>
-                , which can be started via<b>mvn jetty:run-exploded</b>.
-            </p>
-        </section>
-        <section name="Setup of Ext-Scripting">
-            <subsection name="Requirements">
-                <p>
-                    Before setting up Ext-Scripting make sure following requirements are met.
-                </p>
-                <ul>
-                    <li>JAVA_HOME points towards a valid Java SDK (JRE is not sufficient)</li>
-                    <li>You know how to create and deploy a web application within your preferred setup (command line,
-                        ide)
-                    </li>
-                </ul>
-            </subsection>
-            <subsection name="Setup">
-                <p>
-                    While one of the aims of Ext-Scripting was to enable an easy setup, for now it was not entirely
-                    possible for now to get a plug and play configuration. Several configuration steps have to be
-                    performed.
-                </p>
-                <ul>
-                    <li>A valid
-                        <b>MyFaces</b>
-                        installation has to be present
-                    </li>
-                    <li>Ext-Scripting and its dependencies has to be added to the MyFaces installation</li>
-                    <li>The paths to the scripts have to be present (see also below)</li>
-                </ul>
-
-            </subsection>
-            TODO add the ALPHA 1 Installation here as separate link!
-
-            <subsection name="Preparations via Apache Maven 2">
-                <p>The easiest way is probably to use Ext-Scripting via Apache Maven 2
-                </p>
-                <p>(note a compile is not necessary since all needed files are hosted on the apache infrastructure)</p>
-
-
-                <p>
-                    As a prerequisite make sure you have added following entry to your pom.xml so that
-                    the appropriate jars can be loaded from our beta build repository:
-                    <source><![CDATA[
-    <repositories>
-        <repository>
-            <id>extscript-beta-1</id>
-            <url>http://people.apache.org/~lu4242/extscript10beta1</url>
-            <releases>
-                <enabled>true</enabled>
-            </releases>
-            <snapshots>
-                <enabled>false</enabled>
-            </snapshots>
-        </repository>
-    </repositories>
-                    ]]>
-                    </source>
-                </p>
-                <p>This will enable Maven to download the beta-1 build jars from the internet.</p>
-
-                <p>
-                    Depending on your configuration and preferred JDK version you can add following entries to your
-                    Maven pom.xml to enable Ext-Scripting
-                </p>
-                <p/>
-                <h4>MyFaces 1.2.8+</h4>
-                <source><![CDATA[
-     <dependency>
-        <groupId>org.apache.myfaces.extension-scripting</groupId>
-        <artifactId>extscript-myfaces12-bundle</artifactId>
-        <version>1.0-beta-1</version>
-     </dependency>]]></source>
-
-                <h4>MyFaces 2.+</h4>
-                <source><![CDATA[
-     <dependency>
-        <groupId>org.apache.myfaces.extension-scripting</groupId>
-        <artifactId>extscript-myfaces20-bundle</artifactId>
-        <version>1.0-beta-1</version>
-     </dependency>]]></source>
-            </subsection>
-
-            <!-- TODO add download information here -->
-
-            <subsection name="Preparing the Necessary web.xml Entries">
-                <h4>First Step</h4>
-                <p>To enable Ext-Scripting you also have to add several entries to your web.xml file.</p>
-
-                <p>First a context param has to be set which attaches the Ext-Scripting plugins to MyFaces</p>
-                <source><![CDATA[
-     <context-param>
-        <description>
-            Enables our scripting engine support plugins
-        </description>
-        <param-name>org.apache.myfaces.FACES_INIT_PLUGINS</param-name>
-        <param-value>
-            org.apache.myfaces.scripting.servlet.StartupServletContextPluginChainLoader
-        </param-value>
-     </context-param>]]></source>
-                <h4>Second Step</h4>
-                <p>Add Ext-Scriptings servlet filter to your servlet configuration</p>
-                <source><![CDATA[
-    <filter>
-        <filter-name>scriptingFilter</filter-name>
-        <filter-class>org.apache.myfaces.scripting.servlet.ScriptingServletFilter</filter-class>
-    </filter>
-    <filter-mapping>
-        <filter-name>scriptingFilter</filter-name>
-        <url-pattern>/*</url-pattern>
-        <dispatcher>REQUEST</dispatcher>
-        <dispatcher>FORWARD</dispatcher>
-        <dispatcher>INCLUDE</dispatcher>
-        <dispatcher>ERROR</dispatcher>
-    </filter-mapping>]]></source>
-                <p>The init parameter and the servlet filter
-                    <b>MUST</b>
-                    be set otherwise Ext-Scripting will not be enabled!
-                </p>
-                <h4>Additional Optional Steps</h4>
-                <p>Ext-Scripting exposes a number configuration parameters which can be set via context parameters in
-                    your web.xml
-                </p>
-
-                <h4>Adjust the web.xml Root source paths</h4>
-                <p>Since the goal of Ext-Scripting is to provide scriptability to a running web application, it has to
-                    know where to find the sources. For this, a default location has been chosen
-                    according to the standards set by the Mojarra Groovy Extension.
-                </p>
-                <p>
-                    The location looks like:
-                </p>
-                <source><![CDATA[
-     <webapp>/WEB-INF/groovy
-                ]]></source>
-                <p>
-                    as root location for Groovy files
-                </p>
-                <source><![CDATA[
-     <webapp>/WEB-INF/java
-                ]]></source>
-                <p>
-                    as root location for java files.
-                </p>
-                <p>
-                    Following image displays the default locations:
-                    <img src="images/ext_default_file.jpg"/>
-                </p>
-                <p>However in a normal development scenario, it is often undesirable to have the files located in a
-                    deployment location, and a pointer mechanism towards the actual source locations would be more
-                    desirable.
-
-                    To provide such a mechanism, Ext-Scripting allows two optional web.xml context parameters, which
-                    allow the rerouting of source locations of the supported languages!
-                </p>
-                <source><![CDATA[
-    <context-param>
-        <description>Additional comma separated loader paths to allow direct editing on the sources directory instead
-            of the deployment dir
-        </description>
-        <param-name>org.apache.myfaces.scripting.groovy.LOADER_PATHS</param-name>
-        <param-value>
-           <some project path>/src/main/webapp/WEB-INF/groovy
-        </param-value>
-    </context-param>
-    <context-param>
-        <description>Additional comma separated loader paths to allow direct editing on the sources directory instead
-            of the deployment dir
-        </description>
-        <param-name>org.apache.myfaces.scripting.java.LOADER_PATHS</param-name>
-        <param-value>
-            <some project path>/src/main/webapp/WEB-INF/java
-        </param-value>
-    </context-param>
-                ]]></source>
-                <ul>
-                    <li>
-                        <b>org.apache.myfaces.scripting.groovy.LOADER_PATHS</b>
-                        can be a comma separated list of paths which point to the actual Groovy sources.
-                    </li>
-                    <li>
-                        <b>org.apache.myfaces.scripting.java.LOADER_PATHS</b>
-                        does the same for Java sources..
-                    </li>
-                </ul>
-
-            </subsection>
-        </section>
-        <section name="Navigation Bottom">
-            <a href="index.html">&lt;&lt;Back to the Start Page</a>
-            or
-
-            <a href="using_general.html">On to the General Users Guide&gt;&gt;</a>
-        </section>
-
-    </body>
-</document>
diff --git a/src/site/xdoc/using_netbeans.xml b/src/site/xdoc/using_netbeans.xml
index 1ac43e8..af915b0 100644
--- a/src/site/xdoc/using_netbeans.xml
+++ b/src/site/xdoc/using_netbeans.xml
@@ -35,7 +35,7 @@
             <p>
                 Netbeans also works perfectly in conjunction with Ext-Scripting
                 pretty much everything said for Eclipse and Intellij also applies to NetBeans.
-                The biggest restriction is if you want to use netbeans in conjunction with maven
+                The biggest restriction is if you want to use Netbeans in conjunction with maven
                 only one source folder is picked up and you cannot use additional source folders
                 like for instance Intellij or Eclipse allow. So either dont use maven or
                 use package whitelisting as workaround if you want to use Netbeans.
@@ -62,7 +62,7 @@
         </section>
         <section name="Setting up Ext-Scripting specifics">
             <p>
-                If you only have one sourcepath you might have a look at the package whitelisting
+                If you only have one source path you might have a look at the package whitelisting
                 to mark only the packages you actively want to edit for this deployment cycle.
                 This speeds up startup time and helps generally to avoid restarts.
             </p>