 ------
 Dependencies
 ------
 Brett Porter
 Hervé Boutemy
 Paul Gier
 ------
 2009-05-07
 ------

 ~~ Licensed to the Apache Software Foundation (ASF) under one
 ~~ or more contributor license agreements.  See the NOTICE file
 ~~ distributed with this work for additional information
 ~~ regarding copyright ownership.  The ASF licenses this file
 ~~ to you under the Apache License, Version 2.0 (the
 ~~ "License"); you may not use this file except in compliance
 ~~ with the License.  You may obtain a copy of the License at
 ~~
 ~~   http://www.apache.org/licenses/LICENSE-2.0
 ~~
 ~~ Unless required by applicable law or agreed to in writing,
 ~~ software distributed under the License is distributed on an
 ~~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 ~~ KIND, either express or implied.  See the License for the
 ~~ specific language governing permissions and limitations
 ~~ under the License.

 ~~ NOTE: For help with the syntax of this file, see:
 ~~ http://maven.apache.org/doxia/references/apt-format.html

Basic Example

  The following example declares three dependencies and adds them to the <<<dependency.classpath>>> pathId.

-----
<artifact:dependencies pathId="dependency.classpath">
  <dependency groupId="junit" artifactId="junit" version="3.8.2" scope="test"/>
  <dependency groupId="org.codehaus.modello" artifactId="modello-core" version="1.0-alpha-2-SNAPSHOT"/>
  <dependency groupId="javax.servlet" artifactId="servlet-api" version="2.4" scope="provided"/>
</artifact:dependencies>
-----

  The pathId can be used in the Ant build file for example in the <<<javac>>> task.

-----
<javac ...>
  <classpath refid="dependency.classpath" />
  ...
</javac>
-----

Using FileSets and the Version Mapper

  Another option you can use is <<<filesetId>>>, which will give you a fileset reference that can be used to copy
  files into a particular location. For example, to populate <<<WEB-INF/lib>>> with your dependencies
  you could use the following:

-----
<artifact:dependencies filesetId="dependency.fileset" useScope="runtime">
  <!-- Your dependency definitions go here -->
  ...
</artifact:dependencies>
<copy todir="${webapp.output}/WEB-INF/lib">
  <fileset refid="dependency.fileset" />
  <!-- This mapper strips off all leading directory information -->
  <mapper type="flatten" />
</copy>
-----

  Note the <<<useScope>>> attribute in this call. This ensures that your web application only includes your compile
  and runtime dependencies, excluding those that are only for testing or are expected to already be provided by
  the servlet container.

  You can also specify a <<<scope>>> parameter on each dependency. This changes the behavior of
  transitive dependencies and is useful for building different types of classpaths. To see how it affects
  the behaviour of the dependencies, see the {{{http://maven.apache.org/guides/introduction/introduction-to-dependency-mechanism.html} Dependency Mechanism}}
  documentation on the Maven 2.0 site.

  Other options are:

    * <<<sourcesFilesetId>>>, which will give you a fileset reference containing sources artifacts, <(since 2.0.6)>

    * <<<javadocFilesetId>>>, which will give you a fileset reference containing javadoc artifacts, <(since 2.0.9)>

    * {<<<versionsId>>>}, which can be used to drop version numbers in filenames <(since 2.0.7)>

  For example, to populate <<<lib>>> with your dependencies without the version in the filenames, <<<lib/src>>> with the corresponding sources
  and <<<lib/javadoc>>> with the corresponding javadocs:

-----
<artifact:dependencies filesetId="dependency.fileset"
        sourcesFilesetId="sources.dependency.fileset"
        javadocFilesetId="javadoc.dependency.fileset"
        versionsId="dependency.versions">
  <!-- Your dependency definitions go here -->
  ...
</artifact:dependencies>
<copy todir="lib">
  <fileset refid="dependency.fileset" />
  <mapper classpathref="maven-ant-tasks.classpath"
          classname="org.apache.maven.artifact.ant.VersionMapper"
          from="${dependency.versions}" to="flatten" />
</copy>
<copy todir="lib/src">
  <fileset refid="sources.dependency.fileset" />
  <mapper classpathref="maven-ant-tasks.classpath"
          classname="org.apache.maven.artifact.ant.VersionMapper"
          from="${dependency.versions}" to="flatten" />
</copy>
<copy todir="lib/javadoc">
  <fileset refid="javadoc.dependency.fileset" />
  <mapper classpathref="maven-ant-tasks.classpath"
          classname="org.apache.maven.artifact.ant.VersionMapper"
          from="${dependency.versions}" to="flatten" />
</copy>
-----

  <<Note:>> In the above example you only need to specify
  <<<classpathref="maven-ant-tasks.classpath">>> if are using Maven Ant Tasks
  by {{{../installation.html#typedef} declaring a <<<typedef>>>}}.
  It can be omitted if Maven Ant Tasks was
  {{{../installation.html#lib} installed in Ant's <<<lib>>> directory}}.

Using Properties to Access Dependencies

  <(since 2.0.8)> For each dependency resolved using either inline declaration or a pom reference, the property
  <<<groupId:artifactId:type[:classifier]>>> is defined pointing to the corresponding file.  For example,
  a resolved dependency on junit can be accessed in the following way:

-----
<echo message="JUnit jar file downloaded to ${junit:junit:jar}"/>
-----

Note about system scope

  Dependencies that use the <<<system>>> scope specify a path on the local system that may be outside
  of the local maven repository.  An Ant fileset only allows a single base directory, so these
  dependencies will not be included in the generated fileset for resolved dependencies. They will, however, be included
  in the path object.

Filtering Dependencies by Scope

  There are two options available for filtering POM dependencies by scope: the <<<useScope>>>
  attribute, and the <<<scopes>>> attribute.  One or the other of these attributes should be used
  but not both.

  The <<<useScope>>> attribute follows the Maven conventions for scoping behaviour.  This means the attribute
  can be set to one of three possible scopes: compile, runtime, or test.  These scopes will
  behave as follows.

    * <<<compile>>> - Includes scopes <<<compile>>>, <<<system>>> and <<<provided>>>

    * <<<runtime>>> - Includes scopes <<<compile>>> and <<<runtime>>>

    * <<<test>>> - Includes scopes <<<system>>>, <<<provided>>>, <<<compile>>>, <<<runtime>>> and <<<test>>>

  For example, using the scope <<<runtime>>>, any dependencies defined with <<<compile>>>,
  <<<runtime>>>, or nothing (defaults to <<<compile>>>) in the <<<scope>>> field will be included in
  the resulting fileset.

-----
    <artifact:dependencies filesetId="deps.fileset" useScope="runtime">
      <pom file="mypom.xml"/>
    </artifact:dependencies>
-----

  <(Since 2.0.10)> The <<<scopes>>> attribute accepts a comma separated list of scopes to
  include in the filtering. Only dependencies with these specific scopes will be
  included in the resulting fileset.  If no value is specified, all scopes are included.
  The following example includes only dependencies with a scope of either <<<provided>>> or <<<test>>>.

-----
    <artifact:dependencies filesetId="deps.fileset" scopes="provided, test">
      <pom file="mypom.xml"/>
    </artifact:dependencies>
-----


Filtering Dependencies by Type

  Dependencies can be filtered by type by using the <<<type>>> attribute.  This can be set to a
  comma separated list of the types to select. The following example will only include artifacts of the <<<jar>>> type.

-----
    <artifact:dependencies filesetId="deps.fileset" type="jar">
      <pom file="mypom.xml"/>
    </artifact:dependencies>
-----

  By default, all artifact types will be included when building the list of dependencies.


Generating an Ant build with the dependency properties and references

  <(Since 2.1.0)>  For a project with a large dependency tree, the resolution process can take some time.
  In these cases, the dependencies task provides an option to generate an Ant build file (called build-dependencies.xml
  by default) that contains properties and references generated by the dependency resolution.  This file can be
  used as a cache to quickly load the paths to the dependency artifacts.  Or it can be used directly in
  other ant build files via the <<import>> task.

  There are two parameters to the dependencies task related to this feature <<cacheDependencyRefs>> and
  <<dependencyRefsBuildFile>>.  The first is a boolean parameter to say whether the build file should be
  generated.  By default the file will be created as "./target/build-dependencies.xml".  The second parameter
  allows the default file name to be changed.

  For example, to turn on the dependency cache, the following configuration could be used.

-----
    <artifact:dependencies cacheDependencyRefs="true">
      <pom file="mypom.xml"/>
    </artifact:dependencies>
-----

  The first time the build is run, the dependencies will be resolved from the repository, and the task
  will generate a file called "build-dependencies.xml".  This file contains a list of the properties
  and fileset references generated during the build.  The next time the build is run, the dependency
  references will simply be loaded from the generate file.