| /* |
| * Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. |
| * The ASF licenses this file to You under the Apache License, Version 2.0 |
| * (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| package org.apache.lucene.spatial3d.geom; |
| |
| import java.io.InputStream; |
| import java.io.OutputStream; |
| import java.io.IOException; |
| |
| /** |
| * 3D rectangle, bounded on six sides by X,Y,Z limits |
| * |
| * @lucene.internal |
| */ |
| class StandardXYZSolid extends BaseXYZSolid { |
| |
| /** Min-X */ |
| protected final double minX; |
| /** Max-X */ |
| protected final double maxX; |
| /** Min-Y */ |
| protected final double minY; |
| /** Max-Y */ |
| protected final double maxY; |
| /** Min-Z */ |
| protected final double minZ; |
| /** Max-Z */ |
| protected final double maxZ; |
| |
| /** Whole world? */ |
| protected final boolean isWholeWorld; |
| /** Min-X plane */ |
| protected final SidedPlane minXPlane; |
| /** Max-X plane */ |
| protected final SidedPlane maxXPlane; |
| /** Min-Y plane */ |
| protected final SidedPlane minYPlane; |
| /** Max-Y plane */ |
| protected final SidedPlane maxYPlane; |
| /** Min-Z plane */ |
| protected final SidedPlane minZPlane; |
| /** Max-Z plane */ |
| protected final SidedPlane maxZPlane; |
| |
| /** true if minXPlane intersects globe */ |
| protected final boolean minXPlaneIntersects; |
| /** true if maxXPlane intersects globe */ |
| protected final boolean maxXPlaneIntersects; |
| /** true if minYPlane intersects globe */ |
| protected final boolean minYPlaneIntersects; |
| /** true if maxYPlane intersects globe */ |
| protected final boolean maxYPlaneIntersects; |
| /** true if minZPlane intersects globe */ |
| protected final boolean minZPlaneIntersects; |
| /** true if maxZPlane intersects globe */ |
| protected final boolean maxZPlaneIntersects; |
| |
| /** These are the edge points of the shape, which are defined to be at least one point on |
| * each surface area boundary. In the case of a solid, this includes points which represent |
| * the intersection of XYZ bounding planes and the planet, as well as points representing |
| * the intersection of single bounding planes with the planet itself. |
| */ |
| protected final GeoPoint[] edgePoints; |
| |
| /** Notable points for minXPlane */ |
| protected final GeoPoint[] notableMinXPoints; |
| /** Notable points for maxXPlane */ |
| protected final GeoPoint[] notableMaxXPoints; |
| /** Notable points for minYPlane */ |
| protected final GeoPoint[] notableMinYPoints; |
| /** Notable points for maxYPlane */ |
| protected final GeoPoint[] notableMaxYPoints; |
| /** Notable points for minZPlane */ |
| protected final GeoPoint[] notableMinZPoints; |
| /** Notable points for maxZPlane */ |
| protected final GeoPoint[] notableMaxZPoints; |
| |
| /** |
| * Sole constructor |
| * |
| *@param planetModel is the planet model. |
| *@param minX is the minimum X value. |
| *@param maxX is the maximum X value. |
| *@param minY is the minimum Y value. |
| *@param maxY is the maximum Y value. |
| *@param minZ is the minimum Z value. |
| *@param maxZ is the maximum Z value. |
| */ |
| public StandardXYZSolid(final PlanetModel planetModel, |
| final double minX, |
| final double maxX, |
| final double minY, |
| final double maxY, |
| final double minZ, |
| final double maxZ) { |
| super(planetModel); |
| // Argument checking |
| if (maxX - minX < Vector.MINIMUM_RESOLUTION) |
| throw new IllegalArgumentException("X values in wrong order or identical"); |
| if (maxY - minY < Vector.MINIMUM_RESOLUTION) |
| throw new IllegalArgumentException("Y values in wrong order or identical"); |
| if (maxZ - minZ < Vector.MINIMUM_RESOLUTION) |
| throw new IllegalArgumentException("Z values in wrong order or identical"); |
| |
| this.minX = minX; |
| this.maxX = maxX; |
| this.minY = minY; |
| this.maxY = maxY; |
| this.minZ = minZ; |
| this.maxZ = maxZ; |
| |
| final double worldMinX = planetModel.getMinimumXValue(); |
| final double worldMaxX = planetModel.getMaximumXValue(); |
| final double worldMinY = planetModel.getMinimumYValue(); |
| final double worldMaxY = planetModel.getMaximumYValue(); |
| final double worldMinZ = planetModel.getMinimumZValue(); |
| final double worldMaxZ = planetModel.getMaximumZValue(); |
| |
| // We must distinguish between the case where the solid represents the entire world, |
| // and when the solid has no overlap with any part of the surface. In both cases, |
| // there will be no edgepoints. |
| isWholeWorld = |
| (minX - worldMinX < -Vector.MINIMUM_RESOLUTION) && |
| (maxX - worldMaxX > Vector.MINIMUM_RESOLUTION) && |
| (minY - worldMinY < -Vector.MINIMUM_RESOLUTION) && |
| (maxY - worldMaxY > Vector.MINIMUM_RESOLUTION) && |
| (minZ - worldMinZ < -Vector.MINIMUM_RESOLUTION) && |
| (maxZ - worldMaxZ > Vector.MINIMUM_RESOLUTION); |
| |
| if (isWholeWorld) { |
| minXPlane = null; |
| maxXPlane = null; |
| minYPlane = null; |
| maxYPlane = null; |
| minZPlane = null; |
| maxZPlane = null; |
| minXPlaneIntersects = false; |
| maxXPlaneIntersects = false; |
| minYPlaneIntersects = false; |
| maxYPlaneIntersects = false; |
| minZPlaneIntersects = false; |
| maxZPlaneIntersects = false; |
| notableMinXPoints = null; |
| notableMaxXPoints = null; |
| notableMinYPoints = null; |
| notableMaxYPoints = null; |
| notableMinZPoints = null; |
| notableMaxZPoints = null; |
| edgePoints = null; |
| } else { |
| // Construct the planes |
| minXPlane = new SidedPlane(maxX,0.0,0.0,xUnitVector,-minX); |
| maxXPlane = new SidedPlane(minX,0.0,0.0,xUnitVector,-maxX); |
| minYPlane = new SidedPlane(0.0,maxY,0.0,yUnitVector,-minY); |
| maxYPlane = new SidedPlane(0.0,minY,0.0,yUnitVector,-maxY); |
| minZPlane = new SidedPlane(0.0,0.0,maxZ,zUnitVector,-minZ); |
| maxZPlane = new SidedPlane(0.0,0.0,minZ,zUnitVector,-maxZ); |
| |
| // We need at least one point on the planet surface for each manifestation of the shape. |
| // There can be up to 2 (on opposite sides of the world). But we have to go through |
| // 12 combinations of adjacent planes in order to find out if any have 2 intersection solution. |
| // Typically, this requires 12 square root operations. |
| final GeoPoint[] minXminY = minXPlane.findIntersections(planetModel,minYPlane,maxXPlane,maxYPlane,minZPlane,maxZPlane); |
| final GeoPoint[] minXmaxY = minXPlane.findIntersections(planetModel,maxYPlane,maxXPlane,minYPlane,minZPlane,maxZPlane); |
| final GeoPoint[] minXminZ = minXPlane.findIntersections(planetModel,minZPlane,maxXPlane,maxZPlane,minYPlane,maxYPlane); |
| final GeoPoint[] minXmaxZ = minXPlane.findIntersections(planetModel,maxZPlane,maxXPlane,minZPlane,minYPlane,maxYPlane); |
| |
| final GeoPoint[] maxXminY = maxXPlane.findIntersections(planetModel,minYPlane,minXPlane,maxYPlane,minZPlane,maxZPlane); |
| final GeoPoint[] maxXmaxY = maxXPlane.findIntersections(planetModel,maxYPlane,minXPlane,minYPlane,minZPlane,maxZPlane); |
| final GeoPoint[] maxXminZ = maxXPlane.findIntersections(planetModel,minZPlane,minXPlane,maxZPlane,minYPlane,maxYPlane); |
| final GeoPoint[] maxXmaxZ = maxXPlane.findIntersections(planetModel,maxZPlane,minXPlane,minZPlane,minYPlane,maxYPlane); |
| |
| final GeoPoint[] minYminZ = minYPlane.findIntersections(planetModel,minZPlane,maxYPlane,maxZPlane,minXPlane,maxXPlane); |
| final GeoPoint[] minYmaxZ = minYPlane.findIntersections(planetModel,maxZPlane,maxYPlane,minZPlane,minXPlane,maxXPlane); |
| final GeoPoint[] maxYminZ = maxYPlane.findIntersections(planetModel,minZPlane,minYPlane,maxZPlane,minXPlane,maxXPlane); |
| final GeoPoint[] maxYmaxZ = maxYPlane.findIntersections(planetModel,maxZPlane,minYPlane,minZPlane,minXPlane,maxXPlane); |
| |
| notableMinXPoints = glueTogether(minXminY, minXmaxY, minXminZ, minXmaxZ); |
| notableMaxXPoints = glueTogether(maxXminY, maxXmaxY, maxXminZ, maxXmaxZ); |
| notableMinYPoints = glueTogether(minXminY, maxXminY, minYminZ, minYmaxZ); |
| notableMaxYPoints = glueTogether(minXmaxY, maxXmaxY, maxYminZ, maxYmaxZ); |
| notableMinZPoints = glueTogether(minXminZ, maxXminZ, minYminZ, maxYminZ); |
| notableMaxZPoints = glueTogether(minXmaxZ, maxXmaxZ, minYmaxZ, maxYmaxZ); |
| |
| |
| //System.err.println( |
| // " notableMinXPoints="+Arrays.asList(notableMinXPoints)+" notableMaxXPoints="+Arrays.asList(notableMaxXPoints)+ |
| // " notableMinYPoints="+Arrays.asList(notableMinYPoints)+" notableMaxYPoints="+Arrays.asList(notableMaxYPoints)+ |
| // " notableMinZPoints="+Arrays.asList(notableMinZPoints)+" notableMaxZPoints="+Arrays.asList(notableMaxZPoints)); |
| |
| // Now, compute the edge points. |
| // This is the trickiest part of setting up an XYZSolid. We've computed intersections already, so |
| // we'll start there. |
| // There can be a number of shapes, each of which needs an edgepoint. Each side by itself might contribute |
| // an edgepoint, for instance, if the plane describing that side intercepts the planet in such a way that the ellipse |
| // of interception does not meet any other planes. Plane intersections can each contribute 0, 1, or 2 edgepoints. |
| // |
| // All of this makes for a lot of potential edgepoints, but I believe these can be pruned back with careful analysis. |
| // I haven't yet done that analysis, however, so I will treat them all as individual edgepoints. |
| |
| // The cases we are looking for are when the four corner points for any given |
| // plane are all outside of the world, AND that plane intersects the world. |
| // There are eight corner points all told; we must evaluate these WRT the planet surface. |
| final boolean minXminYminZ = planetModel.pointOutside(minX, minY, minZ); |
| final boolean minXminYmaxZ = planetModel.pointOutside(minX, minY, maxZ); |
| final boolean minXmaxYminZ = planetModel.pointOutside(minX, maxY, minZ); |
| final boolean minXmaxYmaxZ = planetModel.pointOutside(minX, maxY, maxZ); |
| final boolean maxXminYminZ = planetModel.pointOutside(maxX, minY, minZ); |
| final boolean maxXminYmaxZ = planetModel.pointOutside(maxX, minY, maxZ); |
| final boolean maxXmaxYminZ = planetModel.pointOutside(maxX, maxY, minZ); |
| final boolean maxXmaxYmaxZ = planetModel.pointOutside(maxX, maxY, maxZ); |
| |
| //System.err.println("Outside world: minXminYminZ="+minXminYminZ+" minXminYmaxZ="+minXminYmaxZ+" minXmaxYminZ="+minXmaxYminZ+ |
| // " minXmaxYmaxZ="+minXmaxYmaxZ+" maxXminYminZ="+maxXminYminZ+" maxXminYmaxZ="+maxXminYmaxZ+" maxXmaxYminZ="+maxXmaxYminZ+ |
| // " maxXmaxYmaxZ="+maxXmaxYmaxZ); |
| |
| // Look at single-plane/world intersections. |
| // We detect these by looking at the world model and noting its x, y, and z bounds. |
| |
| final GeoPoint[] minXEdges; |
| if (minX - worldMinX >= -Vector.MINIMUM_RESOLUTION && minX - worldMaxX <= Vector.MINIMUM_RESOLUTION && |
| minY < 0.0 && maxY > 0.0 && minZ < 0.0 && maxZ > 0.0 && |
| minXminYminZ && minXminYmaxZ && minXmaxYminZ && minXmaxYmaxZ) { |
| // Find any point on the minX plane that intersects the world |
| // First construct a perpendicular plane that will allow us to find a sample point. |
| // This plane is vertical and goes through the points (0,0,0) and (1,0,0) |
| // Then use it to compute a sample point. |
| final GeoPoint intPoint = minXPlane.getSampleIntersectionPoint(planetModel, xVerticalPlane); |
| if (intPoint != null) { |
| minXEdges = new GeoPoint[]{intPoint}; |
| } else { |
| // No intersection found? |
| minXEdges = EMPTY_POINTS; |
| } |
| } else { |
| minXEdges = EMPTY_POINTS; |
| } |
| |
| final GeoPoint[] maxXEdges; |
| if (maxX - worldMinX >= -Vector.MINIMUM_RESOLUTION && maxX - worldMaxX <= Vector.MINIMUM_RESOLUTION && |
| minY < 0.0 && maxY > 0.0 && minZ < 0.0 && maxZ > 0.0 && |
| maxXminYminZ && maxXminYmaxZ && maxXmaxYminZ && maxXmaxYmaxZ) { |
| // Find any point on the maxX plane that intersects the world |
| // First construct a perpendicular plane that will allow us to find a sample point. |
| // This plane is vertical and goes through the points (0,0,0) and (1,0,0) |
| // Then use it to compute a sample point. |
| final GeoPoint intPoint = maxXPlane.getSampleIntersectionPoint(planetModel, xVerticalPlane); |
| if (intPoint != null) { |
| maxXEdges = new GeoPoint[]{intPoint}; |
| } else { |
| maxXEdges = EMPTY_POINTS; |
| } |
| } else { |
| maxXEdges = EMPTY_POINTS; |
| } |
| |
| final GeoPoint[] minYEdges; |
| if (minY - worldMinY >= -Vector.MINIMUM_RESOLUTION && minY - worldMaxY <= Vector.MINIMUM_RESOLUTION && |
| minX < 0.0 && maxX > 0.0 && minZ < 0.0 && maxZ > 0.0 && |
| minXminYminZ && minXminYmaxZ && maxXminYminZ && maxXminYmaxZ) { |
| // Find any point on the minY plane that intersects the world |
| // First construct a perpendicular plane that will allow us to find a sample point. |
| // This plane is vertical and goes through the points (0,0,0) and (0,1,0) |
| // Then use it to compute a sample point. |
| final GeoPoint intPoint = minYPlane.getSampleIntersectionPoint(planetModel, yVerticalPlane); |
| if (intPoint != null) { |
| minYEdges = new GeoPoint[]{intPoint}; |
| } else { |
| minYEdges = EMPTY_POINTS; |
| } |
| } else { |
| minYEdges = EMPTY_POINTS; |
| } |
| |
| final GeoPoint[] maxYEdges; |
| if (maxY - worldMinY >= -Vector.MINIMUM_RESOLUTION && maxY - worldMaxY <= Vector.MINIMUM_RESOLUTION && |
| minX < 0.0 && maxX > 0.0 && minZ < 0.0 && maxZ > 0.0 && |
| minXmaxYminZ && minXmaxYmaxZ && maxXmaxYminZ && maxXmaxYmaxZ) { |
| // Find any point on the maxY plane that intersects the world |
| // First construct a perpendicular plane that will allow us to find a sample point. |
| // This plane is vertical and goes through the points (0,0,0) and (0,1,0) |
| // Then use it to compute a sample point. |
| final GeoPoint intPoint = maxYPlane.getSampleIntersectionPoint(planetModel, yVerticalPlane); |
| if (intPoint != null) { |
| maxYEdges = new GeoPoint[]{intPoint}; |
| } else { |
| maxYEdges = EMPTY_POINTS; |
| } |
| } else { |
| maxYEdges = EMPTY_POINTS; |
| } |
| |
| final GeoPoint[] minZEdges; |
| if (minZ - worldMinZ >= -Vector.MINIMUM_RESOLUTION && minZ - worldMaxZ <= Vector.MINIMUM_RESOLUTION && |
| minX < 0.0 && maxX > 0.0 && minY < 0.0 && maxY > 0.0 && |
| minXminYminZ && minXmaxYminZ && maxXminYminZ && maxXmaxYminZ) { |
| // Find any point on the minZ plane that intersects the world |
| // First construct a perpendicular plane that will allow us to find a sample point. |
| // This plane is vertical and goes through the points (0,0,0) and (1,0,0) |
| // Then use it to compute a sample point. |
| final GeoPoint intPoint = minZPlane.getSampleIntersectionPoint(planetModel, xVerticalPlane); |
| if (intPoint != null) { |
| minZEdges = new GeoPoint[]{intPoint}; |
| } else { |
| minZEdges = EMPTY_POINTS; |
| } |
| } else { |
| minZEdges = EMPTY_POINTS; |
| } |
| |
| final GeoPoint[] maxZEdges; |
| if (maxZ - worldMinZ >= -Vector.MINIMUM_RESOLUTION && maxZ - worldMaxZ <= Vector.MINIMUM_RESOLUTION && |
| minX < 0.0 && maxX > 0.0 && minY < 0.0 && maxY > 0.0 && |
| minXminYmaxZ && minXmaxYmaxZ && maxXminYmaxZ && maxXmaxYmaxZ) { |
| // Find any point on the maxZ plane that intersects the world |
| // First construct a perpendicular plane that will allow us to find a sample point. |
| // This plane is vertical and goes through the points (0,0,0) and (1,0,0) (that is, its orientation doesn't matter) |
| // Then use it to compute a sample point. |
| final GeoPoint intPoint = maxZPlane.getSampleIntersectionPoint(planetModel, xVerticalPlane); |
| if (intPoint != null) { |
| maxZEdges = new GeoPoint[]{intPoint}; |
| } else { |
| maxZEdges = EMPTY_POINTS; |
| } |
| } else { |
| maxZEdges = EMPTY_POINTS; |
| } |
| |
| //System.err.println( |
| // " minXEdges="+Arrays.asList(minXEdges)+" maxXEdges="+Arrays.asList(maxXEdges)+ |
| // " minYEdges="+Arrays.asList(minYEdges)+" maxYEdges="+Arrays.asList(maxYEdges)+ |
| // " minZEdges="+Arrays.asList(minZEdges)+" maxZEdges="+Arrays.asList(maxZEdges)); |
| |
| minXPlaneIntersects = notableMinXPoints.length + minXEdges.length > 0; |
| maxXPlaneIntersects = notableMaxXPoints.length + maxXEdges.length > 0; |
| minYPlaneIntersects = notableMinYPoints.length + minYEdges.length > 0; |
| maxYPlaneIntersects = notableMaxYPoints.length + maxYEdges.length > 0; |
| minZPlaneIntersects = notableMinZPoints.length + minZEdges.length > 0; |
| maxZPlaneIntersects = notableMaxZPoints.length + maxZEdges.length > 0; |
| |
| // Glue everything together. This is not a minimal set of edgepoints, as of now, but it does completely describe all shapes on the |
| // planet. |
| this.edgePoints = glueTogether(minXminY, minXmaxY, minXminZ, minXmaxZ, |
| maxXminY, maxXmaxY, maxXminZ, maxXmaxZ, |
| minYminZ, minYmaxZ, maxYminZ, maxYmaxZ, |
| minXEdges, maxXEdges, minYEdges, maxYEdges, minZEdges, maxZEdges); |
| } |
| } |
| |
| /** |
| * Constructor for deserialization. |
| * @param planetModel is the planet model. |
| * @param inputStream is the input stream. |
| */ |
| public StandardXYZSolid(final PlanetModel planetModel, final InputStream inputStream) throws IOException { |
| this(planetModel, |
| SerializableObject.readDouble(inputStream), |
| SerializableObject.readDouble(inputStream), |
| SerializableObject.readDouble(inputStream), |
| SerializableObject.readDouble(inputStream), |
| SerializableObject.readDouble(inputStream), |
| SerializableObject.readDouble(inputStream)); |
| } |
| |
| @Override |
| public void write(final OutputStream outputStream) throws IOException { |
| SerializableObject.writeDouble(outputStream, minX); |
| SerializableObject.writeDouble(outputStream, maxX); |
| SerializableObject.writeDouble(outputStream, minY); |
| SerializableObject.writeDouble(outputStream, maxY); |
| SerializableObject.writeDouble(outputStream, minZ); |
| SerializableObject.writeDouble(outputStream, maxZ); |
| } |
| |
| @Override |
| protected GeoPoint[] getEdgePoints() { |
| return edgePoints; |
| } |
| |
| @Override |
| public boolean isWithin(final double x, final double y, final double z) { |
| if (isWholeWorld) { |
| return true; |
| } |
| return minXPlane.isWithin(x, y, z) && |
| maxXPlane.isWithin(x, y, z) && |
| minYPlane.isWithin(x, y, z) && |
| maxYPlane.isWithin(x, y, z) && |
| minZPlane.isWithin(x, y, z) && |
| maxZPlane.isWithin(x, y, z); |
| } |
| |
| @Override |
| public int getRelationship(final GeoShape path) { |
| if (isWholeWorld) { |
| if (path.getEdgePoints().length > 0) |
| return WITHIN; |
| return OVERLAPS; |
| } |
| |
| /* |
| for (GeoPoint p : getEdgePoints()) { |
| System.err.println(" Edge point "+p+" path.isWithin()? "+path.isWithin(p)); |
| } |
| |
| for (GeoPoint p : path.getEdgePoints()) { |
| System.err.println(" path edge point "+p+" isWithin()? "+isWithin(p)+" minx="+minXPlane.evaluate(p)+" maxx="+maxXPlane.evaluate(p)+" miny="+minYPlane.evaluate(p)+" maxy="+maxYPlane.evaluate(p)+" minz="+minZPlane.evaluate(p)+" maxz="+maxZPlane.evaluate(p)); |
| } |
| */ |
| |
| //System.err.println(this+" getrelationship with "+path); |
| final int insideRectangle = isShapeInsideArea(path); |
| if (insideRectangle == SOME_INSIDE) { |
| //System.err.println(" some shape points inside area"); |
| return OVERLAPS; |
| } |
| |
| // Figure out if the entire XYZArea is contained by the shape. |
| final int insideShape = isAreaInsideShape(path); |
| if (insideShape == SOME_INSIDE) { |
| //System.err.println(" some area points inside shape"); |
| return OVERLAPS; |
| } |
| |
| if (insideRectangle == ALL_INSIDE && insideShape == ALL_INSIDE) { |
| //System.err.println(" inside of each other"); |
| return OVERLAPS; |
| } |
| |
| if ((minXPlaneIntersects && path.intersects(minXPlane, notableMinXPoints, maxXPlane, minYPlane, maxYPlane, minZPlane, maxZPlane)) || |
| (maxXPlaneIntersects && path.intersects(maxXPlane, notableMaxXPoints, minXPlane, minYPlane, maxYPlane, minZPlane, maxZPlane)) || |
| (minYPlaneIntersects && path.intersects(minYPlane, notableMinYPoints, maxYPlane, minXPlane, maxXPlane, minZPlane, maxZPlane)) || |
| (maxYPlaneIntersects && path.intersects(maxYPlane, notableMaxYPoints, minYPlane, minXPlane, maxXPlane, minZPlane, maxZPlane)) || |
| (minZPlaneIntersects && path.intersects(minZPlane, notableMinZPoints, maxZPlane, minXPlane, maxXPlane, minYPlane, maxYPlane)) || |
| (maxZPlaneIntersects && path.intersects(maxZPlane, notableMaxZPoints, minZPlane, minXPlane, maxXPlane, minYPlane, maxYPlane))) { |
| //System.err.println(" edges intersect"); |
| return OVERLAPS; |
| } |
| |
| if (insideRectangle == ALL_INSIDE) { |
| //System.err.println(" all shape points inside area"); |
| return WITHIN; |
| } |
| |
| if (insideShape == ALL_INSIDE) { |
| //System.err.println(" all area points inside shape"); |
| return CONTAINS; |
| } |
| //System.err.println(" disjoint"); |
| return DISJOINT; |
| } |
| |
| @Override |
| public boolean equals(Object o) { |
| if (!(o instanceof StandardXYZSolid)) |
| return false; |
| StandardXYZSolid other = (StandardXYZSolid) o; |
| if (!super.equals(other) || |
| other.isWholeWorld != isWholeWorld) { |
| return false; |
| } |
| if (!isWholeWorld) { |
| return other.minXPlane.equals(minXPlane) && |
| other.maxXPlane.equals(maxXPlane) && |
| other.minYPlane.equals(minYPlane) && |
| other.maxYPlane.equals(maxYPlane) && |
| other.minZPlane.equals(minZPlane) && |
| other.maxZPlane.equals(maxZPlane); |
| } |
| return true; |
| } |
| |
| @Override |
| public int hashCode() { |
| int result = super.hashCode(); |
| result = 31 * result + (isWholeWorld?1:0); |
| if (!isWholeWorld) { |
| result = 31 * result + minXPlane.hashCode(); |
| result = 31 * result + maxXPlane.hashCode(); |
| result = 31 * result + minYPlane.hashCode(); |
| result = 31 * result + maxYPlane.hashCode(); |
| result = 31 * result + minZPlane.hashCode(); |
| result = 31 * result + maxZPlane.hashCode(); |
| } |
| return result; |
| } |
| |
| @Override |
| public String toString() { |
| return "StandardXYZSolid: {planetmodel="+planetModel+", isWholeWorld="+isWholeWorld+", minXplane="+minXPlane+", maxXplane="+maxXPlane+", minYplane="+minYPlane+", maxYplane="+maxYPlane+", minZplane="+minZPlane+", maxZplane="+maxZPlane+"}"; |
| } |
| |
| } |
| |