docs/engine-usage/elasticsearch.md

title: ElasticSearch Engine sidebar_position: 11

This article mainly introduces the installation, usage and configuration of the ElasticSearch engine plugin in Linkis.

1. Preliminary work

1.1 Engine installation

If you want to use the ElasticSearch engine on your Linkis service, you need to install the ElasticSearch service and make sure the service is available.

1.2 Service Authentication

Use the following command to verify whether the ElasticSearch engine service is available. If the service has enabled user authentication, you need to add --user username:password

curl [--user username:password] http://ip:port/_cluster/healty?pretty

The following output means that the ElasticSearch service is available, note that the cluster status is green

{
  "cluster_name" : "docker-cluster",
  "status" : "green",
  "timed_out" : false,
  "number_of_nodes" : 1,
  "number_of_data_nodes" : 1,
  "active_primary_shards" : 7,
  "active_shards" : 7,
  "relocating_shards" : 0,
  "initializing_shards" : 0,
  "unassigned_shards" : 0,
  "delayed_unassigned_shards" : 0,
  "number_of_pending_tasks" : 0,
  "number_of_in_flight_fetch" : 0,
  "task_max_waiting_in_queue_millis" : 0,
  "active_shards_percent_as_number" : 100.0
}

2. Engine plugin installation

2.1 Engine plugin preparation (choose one) non-default engine

Method 1: Download the engine plug-in package directly

Linkis Engine Plugin Download

Method 2: Compile the engine plug-in separately (maven environment is required)

# compile
cd ${linkis_code_dir}/linkis-engineconn-plugins/elasticsearch/
mvn clean install
# The compiled engine plug-in package is located in the following directory
${linkis_code_dir}/linkis-engineconn-plugins/elasticsearch/target/out/

EngineConnPlugin Engine Plugin Installation

2.2 Upload and load engine plugins

Upload the engine plug-in package in 2.1 to the engine directory of the server

${LINKIS_HOME}/lib/linkis-engineconn-plugins

The directory structure after uploading is as follows

linkis-engineconn-plugins/
├── elasticsearch
│   ├── dist
│ │ └── 7.6.2
│   │       ├── conf
│ │ └── lib
│   └── plugin
│ └── 7.6.2

2.3 Engine refresh

2.3.1 Restart and refresh

Refresh the engine by restarting the linkis-cg-linkismanager service

cd ${LINKIS_HOME}/sbin
sh linkis-daemon.sh restart cg-linkismanager

2.3.2 Check if the engine is refreshed successfully

You can check whether the last_update_time of this table in the linkis_engine_conn_plugin_bml_resources in the database is the time when the refresh is triggered.

#Login to the linkis database
select * from linkis_cg_engine_conn_plugin_bml_resources;

3. Engine usage

3.1 Submit tasks through `Linkis-cli`

-codeType parameter description

essql: Execute ElasticSearch engine tasks through SQL scripts
esjson: Execute ElasticSearch engine tasks through JSON script

essql method example

Note: Using this form, the ElasticSearch service must install the SQL plug-in, please refer to the installation method: https://github.com/NLPchina/elasticsearch-sql#elasticsearch-762

 sh ./bin/linkis-cli -submitUser Hadoop \
 -engineType elasticsearch-7.6.2 -codeType essql \
 -code '{"sql": "select * from kibana_sample_data_ecommerce limit 10' \
 -runtimeMap linkis.es.http.method=GET \
 -runtimeMap linkis.es.http.endpoint=/_sql \
 -runtimeMap linkis.es.datasource=hadoop  \
 -runtimeMap linkis.es.cluster=127.0.0.1:9200

esjson style example

sh ./bin/linkis-cli -submitUser Hadoop \
-engineType elasticsearch-7.6.2 -codeType esjson \
-code '{"query": {"match": {"order_id": "584677"}}}' \
-runtimeMap linkis.es.http.method=GET \
-runtimeMap linkis.es.http.endpoint=/kibana_sample_data_ecommerce/_search \
-runtimeMap linkis.es.datasource=hadoop  \
-runtimeMap linkis.es.cluster=127.0.0.1:9200

More Linkis-Cli command parameter reference: Linkis-Cli usage

4. Engine configuration instructions

4.1 Default Configuration Description

Configuration	Default	Required	Description
linkis.es.cluster	127.0.0.1:9200	yes	ElasticSearch cluster, multiple nodes separated by commas
linkis.es.datasource	hadoop	是	ElasticSearch datasource
linkis.es.username	none	no	ElasticSearch cluster username
linkis.es.password	none	no	ElasticSearch cluster password
linkis.es.auth.cache	false	No	Whether the client caches authentication
linkis.es.sniffer.enable	false	No	Whether the client enables sniffer
linkis.es.http.method	GET	No	Call method
linkis.es.http.endpoint	/_search	No	Endpoint called by JSON script
linkis.es.sql.endpoint	/_sql	No	Endpoint called by SQL script
linkis.es.sql.format	{“query”:“%s”}	No	Template called by SQL script, %s is replaced with SQL as the request body to request Es cluster
linkis.es.headers.*	None	No	Client Headers Configuration
linkis.engineconn.concurrent.limit	100	No	Maximum concurrent engine

4.2 Configuration modification

If the default parameters are not satisfied, there are the following ways to configure some basic parameters

4.2.1 Management console configuration

Note: After modifying the configuration under the IDE tag, you need to specify -creator IDE to take effect (other tags are similar), such as:

sh ./bin/linkis-cli -creator IDE -submitUser hadoop \
-engineType elasticsearch-7.6.2 -codeType esjson \
-code '{"query": {"match": {"order_id": "584677"}}}' \
-runtimeMap linkis.es.http.method=GET \
-runtimeMap linkis.es.http.endpoint=/kibana_sample_data_ecommerce/_search

4.2.2 Task interface configuration

Submit the task interface, configure it through the parameter params.configuration.runtime

Example of http request parameters
{
    "executionContent": {"code": "select * from kibana_sample_data_ecommerce limit 10;", "runType":  "essql"},
    "params": {
                    "variable": {},
                    "configuration": {
                            "runtime": {
                                "linkis.es.cluster":"http://127.0.0.1:9200",
                                "linkis.es.datasource":"hadoop",
                                "linkis.es.username":"",
                                "linkis.es.password":""
                                }
                            }
                    },
    "labels": {
        "engineType": "elasticsearch-7.6.2",
        "userCreator": "hadoop-IDE"
    }
}

4.2.3 File Configuration

Configure by modifying the linkis-engineconn.properties file in the directory ${LINKIS_HOME}/lib/linkis-engineconn-plugins/elasticsearch/dist/7.6.2/conf/, as shown below:

4.3 Engine related data sheet

Linkis is managed through the engine tag, and the data table information involved is shown below.

linkis_ps_configuration_config_key: key and default values of configuration parameters inserted into the engine
linkis_cg_manager_label: Insert engine label such as: elasticsearch-7.6.2
linkis_ps_configuration_category: Insert the directory association of the engine
linkis_ps_configuration_config_value: The configuration that the insertion engine needs to display
linkis_ps_configuration_key_engine_relation: The relationship between the configuration item and the engine

The initial data related to the engine in the table is as follows

-- set variable
SET @ENGINE_LABEL="elasticsearch-7.6.2";
SET @ENGINE_ALL=CONCAT('*-*,',@ENGINE_LABEL);
SET @ENGINE_IDE=CONCAT('*-IDE,',@ENGINE_LABEL);
SET @ENGINE_NAME="elasticsearch";

-- engine label
insert into `linkis_cg_manager_label` (`label_key`, `label_value`, `label_feature`, `label_value_size`, `update_time`, `create_time`) VALUES ('combined_userCreator_engineType', @ENGINE_ALL, 'OPTIONAL', 2, now(), now());
insert into `linkis_cg_manager_label` (`label_key`, `label_value`, `label_feature`, `label_value_size`, `update_time`, `create_time`) VALUES ('combined_userCreator_engineType', @ENGINE_IDE, 'OPTIONAL', 2, now(), now());

select @label_id := id from `linkis_cg_manager_label` where label_value = @ENGINE_IDE;
insert into `linkis_ps_configuration_category` (`label_id`, `level`) VALUES (@label_id, 2);

-- configuration key
INSERT INTO `linkis_ps_configuration_config_key` (`key`, `description`, `name`, `default_value`, `validate_type`, `validate_range`, `engine_conn_type`, `is_hidden`, `is_advanced`, `level`, `treeName`) VALUES ('linkis.es.cluster', 'eg: http://127.0.0.1:9200', 'connection address', 'http://127.0.0.1:9200', 'None', '', @ENGINE_NAME , 0, 0, 1, 'data source conf');
INSERT INTO `linkis_ps_configuration_config_key` (`key`, `description`, `name`, `default_value`, `validate_type`, `validate_range`, `engine_conn_type`, `is_hidden`, `is_advanced`, `level`, `treeName`) VALUES ('linkis.es.datasource', 'Connection Alias', 'Connection Alias', 'hadoop', 'None', '', @ENGINE_NAME, 0, 0, 1, 'Datasource Configuration');
INSERT INTO `linkis_ps_configuration_config_key` (`key`, `description`, `name`, `default_value`, `validate_type`, `validate_range`, `engine_conn_type`, `is_hidden`, `is_advanced`, `level`, `treeName`) VALUES ('linkis.es.username', 'username', 'ES cluster username', 'No', 'None', '', @ENGINE_NAME, 0, 0, 1, 'data source conf');
INSERT INTO `linkis_ps_configuration_config_key` (`key`, `description`, `name`, `default_value`, `validate_type`, `validate_range`, `engine_conn_type`, `is_hidden`, `is_advanced`, `level`, `treeName`) VALUES ('linkis.es.password', 'password', 'ES cluster password', 'None', 'None', '', @ENGINE_NAME, 0, 0, 1, 'data source conf');
INSERT INTO `linkis_ps_configuration_config_key` (`key`, `description`, `name`, `default_value`, `validate_type`, `validate_range`, `engine_conn_type`, `is_hidden`, `is_advanced`, `level`, `treeName`) VALUES ('linkis.es.auth.cache', 'Does the client cache authentication', 'Does the client cache authentication', 'false', 'None', '', @ENGINE_NAME, 0, 0, 1, 'data source conf');
INSERT INTO `linkis_ps_configuration_config_key` (`key`, `description`, `name`, `default_value`, `validate_type`, `validate_range`, `engine_conn_type`, `is_hidden`, `is_advanced`, `level`, `treeName`) VALUES ('linkis.es.sniffer.enable', 'Whether the client enables sniffer', 'Whether the client enables sniffer', 'false', 'None', '', @ENGINE_NAME, 0, 0, 1, 'data source conf');
INSERT INTO `linkis_ps_configuration_config_key` (`key`, `description`, `name`, `default_value`, `validate_type`, `validate_range`, `engine_conn_type`, `is_hidden`, `is_advanced`, `level`, `treeName`) VALUES ('linkis.es.http.method', 'call method', 'HTTP request method', 'GET', 'None', '', @ENGINE_NAME, 0, 0, 1, 'data source conf');
INSERT INTO `linkis_ps_configuration_config_key` (`key`, `description`, `name`, `default_value`, `validate_type`, `validate_range`, `engine_conn_type`, `is_hidden`, `is_advanced`, `level`, `treeName`) VALUES ('linkis.es.http.endpoint', '/_search', 'JSON script Endpoint', '/_search', 'None', '', @ENGINE_NAME, 0, 0, 1, 'data source conf');
INSERT INTO `linkis_ps_configuration_config_key` (`key`, `description`, `name`, `default_value`, `validate_type`, `validate_range`, `engine_conn_type`, `is_hidden`, `is_advanced`, `level`, `treeName`) VALUES ('linkis.es.sql.endpoint', '/_sql', 'SQL script Endpoint', '/_sql', 'None', '', @ENGINE_NAME, 0, 0, 1, 'data source conf');
INSERT INTO `linkis_ps_configuration_config_key` (`key`, `description`, `name`, `default_value`, `validate_type`, `validate_range`, `engine_conn_type`, `is_hidden`, `is_advanced`, `level`, `treeName`) VALUES ('linkis.es.sql.format', 'The template called by the SQL script, replace %s with SQL as the request body to request the Es cluster', 'request body', '{"query":"%s"}', 'None', '', @ENGINE_NAME, 0, 0, 1, 'data source conf');
INSERT INTO `linkis_ps_configuration_config_key` (`key`, `description`, `name`, `default_value`, `validate_type`, `validate_range`, `engine_conn_type`, `is_hidden`, `is_advanced`, `level`, `treeName`) VALUES ('linkis.es.headers.*', 'Client Headers Configuration', 'Client Headers Configuration', 'None', 'None', '', @ENGINE_NAME, 0, 0, 1, 'data source conf');
INSERT INTO `linkis_ps_configuration_config_key` (`key`, `description`, `name`, `default_value`, `validate_type`, `validate_range`, `engine_conn_type`, `is_hidden`, `is_advanced`, `level`, `treeName`) VALUES ('linkis.engineconn.concurrent.limit', 'engine max concurrency', 'engine max concurrency', '100', 'None', '', @ENGINE_NAME, 0, 0, 1, 'data source conf') ;

-- key engine relation
insert into `linkis_ps_configuration_key_engine_relation` (`config_key_id`, `engine_type_label_id`)
(select config.id as config_key_id, label.id AS engine_type_label_id FROM `linkis_ps_configuration_config_key` config
INNER JOIN `linkis_cg_manager_label` label ON config.engine_conn_type = @ENGINE_NAME and label_value = @ENGINE_ALL);

-- engine default configuration
insert into `linkis_ps_configuration_config_value` (`config_key_id`, `config_value`, `config_label_id`)
(select relation.config_key_id AS config_key_id, '' AS config_value, relation.engine_type_label_id AS config_label_id FROM `linkis_ps_configuration_key_engine_relation` relation
INNER JOIN `linkis_cg_manager_label` label ON relation.engine_type_label_id = label.id AND label.label_value = @ENGINE_ALL);