thirdparty/vars.sh - kudu - Git at Google

 #!/bin/bash
 #
 # Licensed to the Apache Software Foundation (ASF) under one
 # or more contributor license agreements.  See the NOTICE file
 # distributed with this work for additional information
 # regarding copyright ownership.  The ASF licenses this file
 # to you under the Apache License, Version 2.0 (the
 # "License"); you may not use this file except in compliance
 # with the License.  You may obtain a copy of the License at
 #
 #   http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing,
 # software distributed under the License is distributed on an
 # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 # KIND, either express or implied.  See the License for the
 # specific language governing permissions and limitations
 # under the License.

 if [ -z "$TP_DIR" ]; then
    echo "TP_DIR variable not set, check your scripts"
    exit 1
 fi

 TP_SOURCE_DIR="$TP_DIR/src"
 TP_BUILD_DIR="$TP_DIR/build"

 # This URL corresponds to the CloudFront Distribution for the S3
 # bucket cloudera-thirdparty-libs which is directly accessible at
 # http://cloudera-thirdparty-libs.s3.amazonaws.com/
 CLOUDFRONT_URL_PREFIX=https://d3dr9sfxru4sde.cloudfront.net

 # Third party dependency downloading URL, default to the CloudFront
 # Distribution URL.
 DEPENDENCY_URL=${DEPENDENCY_URL:-$CLOUDFRONT_URL_PREFIX}

 PREFIX_COMMON=$TP_DIR/installed/common
 PREFIX_DEPS=$TP_DIR/installed/uninstrumented
 PREFIX_DEPS_TSAN=$TP_DIR/installed/tsan

 GFLAGS_VERSION=2.2.2
 GFLAGS_NAME=gflags-$GFLAGS_VERSION
 GFLAGS_SOURCE=$TP_SOURCE_DIR/$GFLAGS_NAME

 GLOG_VERSION=0.3.5
 GLOG_NAME=glog-$GLOG_VERSION
 GLOG_SOURCE=$TP_SOURCE_DIR/$GLOG_NAME

 GMOCK_VERSION=1.8.0
 GMOCK_NAME=googletest-release-$GMOCK_VERSION
 GMOCK_SOURCE=$TP_SOURCE_DIR/$GMOCK_NAME

 GPERFTOOLS_VERSION=2.8.1
 GPERFTOOLS_NAME=gperftools-$GPERFTOOLS_VERSION
 GPERFTOOLS_SOURCE=$TP_SOURCE_DIR/$GPERFTOOLS_NAME

 PROTOBUF_VERSION=3.14.0
 PROTOBUF_NAME=protobuf-$PROTOBUF_VERSION
 PROTOBUF_SOURCE=$TP_SOURCE_DIR/$PROTOBUF_NAME

 # Note: CMake gets patched on SLES12SP0. When changing the CMake version, please check if
 # cmake-issue-15873-dont-use-select.patch needs to be updated.
 CMAKE_VERSION=3.19.1
 CMAKE_NAME=cmake-$CMAKE_VERSION
 CMAKE_SOURCE=$TP_SOURCE_DIR/$CMAKE_NAME

 SNAPPY_VERSION=1.1.8
 SNAPPY_NAME=snappy-$SNAPPY_VERSION
 SNAPPY_SOURCE=$TP_SOURCE_DIR/$SNAPPY_NAME

 LZ4_VERSION=1.9.2
 LZ4_NAME=lz4-$LZ4_VERSION
 LZ4_SOURCE=$TP_SOURCE_DIR/$LZ4_NAME

 # from https://github.com/kiyo-masui/bitshuffle
 BITSHUFFLE_VERSION=0.3.5
 BITSHUFFLE_NAME=bitshuffle-$BITSHUFFLE_VERSION
 BITSHUFFLE_SOURCE=$TP_SOURCE_DIR/$BITSHUFFLE_NAME

 ZLIB_VERSION=1.2.11
 ZLIB_NAME=zlib-$ZLIB_VERSION
 ZLIB_SOURCE=$TP_SOURCE_DIR/$ZLIB_NAME

 LIBEV_VERSION=4.20
 LIBEV_NAME=libev-$LIBEV_VERSION
 LIBEV_SOURCE=$TP_SOURCE_DIR/$LIBEV_NAME

 RAPIDJSON_VERSION=1.1.0
 RAPIDJSON_NAME=rapidjson-$RAPIDJSON_VERSION
 RAPIDJSON_SOURCE=$TP_SOURCE_DIR/$RAPIDJSON_NAME

 # Hash of the squeasel git revision to use.
 # (from http://github.com/cloudera/squeasel)
 #
 # To re-build this tarball use the following in the squeasel repo:
 #  export NAME=squeasel-$(git rev-parse HEAD)
 #  git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
 #  s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
 SQUEASEL_VERSION=d83cf6d9af0e2c98c16467a6a035ae0d7ca21cb1
 SQUEASEL_NAME=squeasel-$SQUEASEL_VERSION
 SQUEASEL_SOURCE=$TP_SOURCE_DIR/$SQUEASEL_NAME

 # Hash of the mustache git revision to use.
 # (from https://github.com/henryr/cpp-mustache)
 #
 # To re-build this tarball use the following in the mustache repo:
 #  export NAME=mustache-$(git rev-parse HEAD)
 #  git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
 #  s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
 MUSTACHE_VERSION=b290952d8eb93d085214d8c8c9eab8559df9f606
 MUSTACHE_NAME=mustache-$MUSTACHE_VERSION
 MUSTACHE_SOURCE=$TP_SOURCE_DIR/$MUSTACHE_NAME

 # git revision of google style guide:
 # https://github.com/google/styleguide
 # git archive --prefix=google-styleguide-$(git rev-parse HEAD)/ -o /tmp/google-styleguide-$(git rev-parse HEAD).tgz HEAD
 GSG_VERSION=7a179d1ac2e08a5cc1622bec900d1e0452776713
 GSG_NAME=google-styleguide-$GSG_VERSION
 GSG_SOURCE=$TP_SOURCE_DIR/$GSG_NAME

 GCOVR_VERSION=3.0
 GCOVR_NAME=gcovr-$GCOVR_VERSION
 GCOVR_SOURCE=$TP_SOURCE_DIR/$GCOVR_NAME

 CURL_VERSION=7.68.0
 CURL_NAME=curl-$CURL_VERSION
 CURL_SOURCE=$TP_SOURCE_DIR/$CURL_NAME

 # Hash of the crcutil git revision to use.
 # (from http://github.com/cloudera/crcutil)
 #
 # To re-build this tarball use the following in the crcutil repo:
 #  export NAME=crcutil-$(git rev-parse HEAD)
 #  git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
 #  s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
 CRCUTIL_VERSION=81f8a60f67190ff1e0c9f2f6e5a07f650671a646
 CRCUTIL_NAME=crcutil-$CRCUTIL_VERSION
 CRCUTIL_SOURCE=$TP_SOURCE_DIR/$CRCUTIL_NAME

 LIBUNWIND_VERSION=1.4.0
 LIBUNWIND_NAME=libunwind-$LIBUNWIND_VERSION
 LIBUNWIND_SOURCE=$TP_SOURCE_DIR/$LIBUNWIND_NAME

 # See package-llvm.sh for details on the LLVM tarball.
 LLVM_VERSION=9.0.0
 LLVM_NAME=llvm-$LLVM_VERSION.src
 LLVM_SOURCE=$TP_SOURCE_DIR/$LLVM_NAME

 # The include-what-you-use is built along with LLVM in its source tree.
 IWYU_VERSION=0.13

 # Python is required to build LLVM 3.6+ because it uses
 # llvm/utils/llvm-build/llvmbuild script. It is only built and installed if
 # the system Python version is less than 2.7.
 PYTHON_VERSION=2.7.13
 PYTHON_NAME=python-$PYTHON_VERSION
 PYTHON_SOURCE=$TP_SOURCE_DIR/$PYTHON_NAME

 # Our trace-viewer repository is separate since it's quite large and
 # shouldn't change frequently. We upload the built artifacts (HTML/JS)
 # when we need to roll to a new revision.
 #
 # The source can be found in the 'kudu' branch of https://github.com/cloudera/catapult
 # and built with "tracing/kudu-build.sh" included within the repository.
 TRACE_VIEWER_VERSION=21d76f8350fea2da2aa25cb6fd512703497d0c11
 TRACE_VIEWER_NAME=kudu-trace-viewer-$TRACE_VIEWER_VERSION
 TRACE_VIEWER_SOURCE=$TP_SOURCE_DIR/$TRACE_VIEWER_NAME

 BOOST_VERSION=1_74_0
 BOOST_NAME=boost_$BOOST_VERSION
 BOOST_SOURCE=$TP_SOURCE_DIR/$BOOST_NAME

 OPENSSL_WORKAROUND_DIR="$TP_DIR/installed/openssl-el6-workaround"

 # The breakpad source artifact is created using the script found in
 # scripts/make-breakpad-src-archive.sh
 BREAKPAD_VERSION=9eac2058b70615519b2c4d8c6bdbfca1bd079e39
 BREAKPAD_NAME=breakpad-$BREAKPAD_VERSION
 BREAKPAD_SOURCE=$TP_SOURCE_DIR/$BREAKPAD_NAME

 # Hash of the sparsehash-c11 git revision to use.
 # (from http://github.com/sparsehash/sparsehash-c11)
 #
 # To re-build this tarball use the following in the sparsehash-c11 repo:
 #  export NAME=sparsehash-c11-$(git rev-parse HEAD)
 #  git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
 #  s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
 SPARSEHASH_VERSION=cf0bffaa456f23bc4174462a789b90f8b6f5f42f
 SPARSEHASH_NAME=sparsehash-c11-$SPARSEHASH_VERSION
 SPARSEHASH_SOURCE=$TP_SOURCE_DIR/$SPARSEHASH_NAME

 SPARSEPP_VERSION=1.22
 SPARSEPP_NAME=sparsepp-$SPARSEPP_VERSION
 SPARSEPP_SOURCE=$TP_SOURCE_DIR/$SPARSEPP_NAME

 THRIFT_VERSION=0.11.0
 THRIFT_NAME=thrift-$THRIFT_VERSION
 THRIFT_SOURCE=$TP_SOURCE_DIR/$THRIFT_NAME

 BISON_VERSION=3.5.4
 BISON_NAME=bison-$BISON_VERSION
 BISON_SOURCE=$TP_SOURCE_DIR/$BISON_NAME

 # Note: The Hive release binary tarball is stripped of unnecessary jars before
 # being uploaded. See thirdparty/package-hive.sh for details.
 # ./thirdparty/package-hive.sh -d -r -v 3.1.2 apache-hive-3.1.2-bin
 HIVE_VERSION=3.1.2
 HIVE_NAME=hive-$HIVE_VERSION
 HIVE_SOURCE=$TP_SOURCE_DIR/$HIVE_NAME

 # Note: The Hadoop release tarball is stripped of unnecessary jars before being
 # uploaded. See thirdparty/package-hadoop.sh for details.
 HADOOP_VERSION=3.2.0
 HADOOP_NAME=hadoop-$HADOOP_VERSION
 HADOOP_SOURCE=$TP_SOURCE_DIR/$HADOOP_NAME

 YAML_VERSION=0.6.2
 YAML_NAME=yaml-cpp-yaml-cpp-$YAML_VERSION
 YAML_SOURCE=$TP_SOURCE_DIR/$YAML_NAME

 CHRONY_VERSION=3.5
 CHRONY_NAME=chrony-$CHRONY_VERSION
 CHRONY_SOURCE=$TP_SOURCE_DIR/$CHRONY_NAME

 # Hash of the gumbo-parser git revision to use.
 # (from https://github.com/google/gumbo-parser)
 #
 # To re-build this tarball use the following in the sparsepp repo:
 #  export NAME=gumbo-parser-$(git rev-parse HEAD)
 #  git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
 #  s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
 GUMBO_PARSER_VERSION=aa91b27b02c0c80c482e24348a457ed7c3c088e0
 GUMBO_PARSER_NAME=gumbo-parser-$GUMBO_PARSER_VERSION
 GUMBO_PARSER_SOURCE=$TP_SOURCE_DIR/$GUMBO_PARSER_NAME

 # Hash of the gumbo-query git revision to use.
 # (from https://github.com/lazytiger/gumbo-query)
 #
 # To re-build this tarball use the following in the sparsepp repo:
 #  export NAME=gumbo-query-$(git rev-parse HEAD)
 #  git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
 #  s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
 GUMBO_QUERY_VERSION=c9f10880b645afccf4fbcd11d2f62a7c01222d2e
 GUMBO_QUERY_NAME=gumbo-query-$GUMBO_QUERY_VERSION
 GUMBO_QUERY_SOURCE=$TP_SOURCE_DIR/$GUMBO_QUERY_NAME

 POSTGRES_VERSION=12.2
 POSTGRES_NAME=postgresql-$POSTGRES_VERSION
 POSTGRES_SOURCE=$TP_SOURCE_DIR/$POSTGRES_NAME

 POSTGRES_JDBC_VERSION=42.2.10
 POSTGRES_JDBC_NAME=postgresql-$POSTGRES_JDBC_VERSION
 POSTGRES_JDBC_SOURCE=$TP_SOURCE_DIR/$POSTGRES_JDBC_NAME

 # If you need to rebuild the tarball for a specific hash instead of a release,
 # run the following commands:
 # mvn versions:set -DnewVersion=$(git rev-parse HEAD)
 # mvn versions:update-child-modules
 # mvn package -DskipTests
 RANGER_VERSION=2.1.0
 RANGER_NAME=ranger-$RANGER_VERSION-admin
 RANGER_SOURCE=$TP_SOURCE_DIR/$RANGER_NAME
	#!/bin/bash
	#
	# Licensed to the Apache Software Foundation (ASF) under one
	# or more contributor license agreements. See the NOTICE file
	# distributed with this work for additional information
	# regarding copyright ownership. The ASF licenses this file
	# to you under the Apache License, Version 2.0 (the
	# "License"); you may not use this file except in compliance
	# with the License. You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing,
	# software distributed under the License is distributed on an
	# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
	# KIND, either express or implied. See the License for the
	# specific language governing permissions and limitations
	# under the License.

	if [ -z "$TP_DIR" ]; then
	echo "TP_DIR variable not set, check your scripts"
	exit 1
	fi

	TP_SOURCE_DIR="$TP_DIR/src"
	TP_BUILD_DIR="$TP_DIR/build"

	# This URL corresponds to the CloudFront Distribution for the S3
	# bucket cloudera-thirdparty-libs which is directly accessible at
	# http://cloudera-thirdparty-libs.s3.amazonaws.com/
	CLOUDFRONT_URL_PREFIX=https://d3dr9sfxru4sde.cloudfront.net

	# Third party dependency downloading URL, default to the CloudFront
	# Distribution URL.
	DEPENDENCY_URL=${DEPENDENCY_URL:-$CLOUDFRONT_URL_PREFIX}

	PREFIX_COMMON=$TP_DIR/installed/common
	PREFIX_DEPS=$TP_DIR/installed/uninstrumented
	PREFIX_DEPS_TSAN=$TP_DIR/installed/tsan

	GFLAGS_VERSION=2.2.2
	GFLAGS_NAME=gflags-$GFLAGS_VERSION
	GFLAGS_SOURCE=$TP_SOURCE_DIR/$GFLAGS_NAME

	GLOG_VERSION=0.3.5
	GLOG_NAME=glog-$GLOG_VERSION
	GLOG_SOURCE=$TP_SOURCE_DIR/$GLOG_NAME

	GMOCK_VERSION=1.8.0
	GMOCK_NAME=googletest-release-$GMOCK_VERSION
	GMOCK_SOURCE=$TP_SOURCE_DIR/$GMOCK_NAME

	GPERFTOOLS_VERSION=2.8.1
	GPERFTOOLS_NAME=gperftools-$GPERFTOOLS_VERSION
	GPERFTOOLS_SOURCE=$TP_SOURCE_DIR/$GPERFTOOLS_NAME

	PROTOBUF_VERSION=3.14.0
	PROTOBUF_NAME=protobuf-$PROTOBUF_VERSION
	PROTOBUF_SOURCE=$TP_SOURCE_DIR/$PROTOBUF_NAME

	# Note: CMake gets patched on SLES12SP0. When changing the CMake version, please check if
	# cmake-issue-15873-dont-use-select.patch needs to be updated.
	CMAKE_VERSION=3.19.1
	CMAKE_NAME=cmake-$CMAKE_VERSION
	CMAKE_SOURCE=$TP_SOURCE_DIR/$CMAKE_NAME

	SNAPPY_VERSION=1.1.8
	SNAPPY_NAME=snappy-$SNAPPY_VERSION
	SNAPPY_SOURCE=$TP_SOURCE_DIR/$SNAPPY_NAME

	LZ4_VERSION=1.9.2
	LZ4_NAME=lz4-$LZ4_VERSION
	LZ4_SOURCE=$TP_SOURCE_DIR/$LZ4_NAME

	# from https://github.com/kiyo-masui/bitshuffle
	BITSHUFFLE_VERSION=0.3.5
	BITSHUFFLE_NAME=bitshuffle-$BITSHUFFLE_VERSION
	BITSHUFFLE_SOURCE=$TP_SOURCE_DIR/$BITSHUFFLE_NAME

	ZLIB_VERSION=1.2.11
	ZLIB_NAME=zlib-$ZLIB_VERSION
	ZLIB_SOURCE=$TP_SOURCE_DIR/$ZLIB_NAME

	LIBEV_VERSION=4.20
	LIBEV_NAME=libev-$LIBEV_VERSION
	LIBEV_SOURCE=$TP_SOURCE_DIR/$LIBEV_NAME

	RAPIDJSON_VERSION=1.1.0
	RAPIDJSON_NAME=rapidjson-$RAPIDJSON_VERSION
	RAPIDJSON_SOURCE=$TP_SOURCE_DIR/$RAPIDJSON_NAME

	# Hash of the squeasel git revision to use.
	# (from http://github.com/cloudera/squeasel)
	#
	# To re-build this tarball use the following in the squeasel repo:
	# export NAME=squeasel-$(git rev-parse HEAD)
	# git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
	# s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
	SQUEASEL_VERSION=d83cf6d9af0e2c98c16467a6a035ae0d7ca21cb1
	SQUEASEL_NAME=squeasel-$SQUEASEL_VERSION
	SQUEASEL_SOURCE=$TP_SOURCE_DIR/$SQUEASEL_NAME

	# Hash of the mustache git revision to use.
	# (from https://github.com/henryr/cpp-mustache)
	#
	# To re-build this tarball use the following in the mustache repo:
	# export NAME=mustache-$(git rev-parse HEAD)
	# git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
	# s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
	MUSTACHE_VERSION=b290952d8eb93d085214d8c8c9eab8559df9f606
	MUSTACHE_NAME=mustache-$MUSTACHE_VERSION
	MUSTACHE_SOURCE=$TP_SOURCE_DIR/$MUSTACHE_NAME

	# git revision of google style guide:
	# https://github.com/google/styleguide
	# git archive --prefix=google-styleguide-$(git rev-parse HEAD)/ -o /tmp/google-styleguide-$(git rev-parse HEAD).tgz HEAD
	GSG_VERSION=7a179d1ac2e08a5cc1622bec900d1e0452776713
	GSG_NAME=google-styleguide-$GSG_VERSION
	GSG_SOURCE=$TP_SOURCE_DIR/$GSG_NAME

	GCOVR_VERSION=3.0
	GCOVR_NAME=gcovr-$GCOVR_VERSION
	GCOVR_SOURCE=$TP_SOURCE_DIR/$GCOVR_NAME

	CURL_VERSION=7.68.0
	CURL_NAME=curl-$CURL_VERSION
	CURL_SOURCE=$TP_SOURCE_DIR/$CURL_NAME

	# Hash of the crcutil git revision to use.
	# (from http://github.com/cloudera/crcutil)
	#
	# To re-build this tarball use the following in the crcutil repo:
	# export NAME=crcutil-$(git rev-parse HEAD)
	# git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
	# s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
	CRCUTIL_VERSION=81f8a60f67190ff1e0c9f2f6e5a07f650671a646
	CRCUTIL_NAME=crcutil-$CRCUTIL_VERSION
	CRCUTIL_SOURCE=$TP_SOURCE_DIR/$CRCUTIL_NAME

	LIBUNWIND_VERSION=1.4.0
	LIBUNWIND_NAME=libunwind-$LIBUNWIND_VERSION
	LIBUNWIND_SOURCE=$TP_SOURCE_DIR/$LIBUNWIND_NAME

	# See package-llvm.sh for details on the LLVM tarball.
	LLVM_VERSION=9.0.0
	LLVM_NAME=llvm-$LLVM_VERSION.src
	LLVM_SOURCE=$TP_SOURCE_DIR/$LLVM_NAME

	# The include-what-you-use is built along with LLVM in its source tree.
	IWYU_VERSION=0.13

	# Python is required to build LLVM 3.6+ because it uses
	# llvm/utils/llvm-build/llvmbuild script. It is only built and installed if
	# the system Python version is less than 2.7.
	PYTHON_VERSION=2.7.13
	PYTHON_NAME=python-$PYTHON_VERSION
	PYTHON_SOURCE=$TP_SOURCE_DIR/$PYTHON_NAME

	# Our trace-viewer repository is separate since it's quite large and
	# shouldn't change frequently. We upload the built artifacts (HTML/JS)
	# when we need to roll to a new revision.
	#
	# The source can be found in the 'kudu' branch of https://github.com/cloudera/catapult
	# and built with "tracing/kudu-build.sh" included within the repository.
	TRACE_VIEWER_VERSION=21d76f8350fea2da2aa25cb6fd512703497d0c11
	TRACE_VIEWER_NAME=kudu-trace-viewer-$TRACE_VIEWER_VERSION
	TRACE_VIEWER_SOURCE=$TP_SOURCE_DIR/$TRACE_VIEWER_NAME

	BOOST_VERSION=1_74_0
	BOOST_NAME=boost_$BOOST_VERSION
	BOOST_SOURCE=$TP_SOURCE_DIR/$BOOST_NAME

	OPENSSL_WORKAROUND_DIR="$TP_DIR/installed/openssl-el6-workaround"

	# The breakpad source artifact is created using the script found in
	# scripts/make-breakpad-src-archive.sh
	BREAKPAD_VERSION=9eac2058b70615519b2c4d8c6bdbfca1bd079e39
	BREAKPAD_NAME=breakpad-$BREAKPAD_VERSION
	BREAKPAD_SOURCE=$TP_SOURCE_DIR/$BREAKPAD_NAME

	# Hash of the sparsehash-c11 git revision to use.
	# (from http://github.com/sparsehash/sparsehash-c11)
	#
	# To re-build this tarball use the following in the sparsehash-c11 repo:
	# export NAME=sparsehash-c11-$(git rev-parse HEAD)
	# git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
	# s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
	SPARSEHASH_VERSION=cf0bffaa456f23bc4174462a789b90f8b6f5f42f
	SPARSEHASH_NAME=sparsehash-c11-$SPARSEHASH_VERSION
	SPARSEHASH_SOURCE=$TP_SOURCE_DIR/$SPARSEHASH_NAME

	SPARSEPP_VERSION=1.22
	SPARSEPP_NAME=sparsepp-$SPARSEPP_VERSION
	SPARSEPP_SOURCE=$TP_SOURCE_DIR/$SPARSEPP_NAME

	THRIFT_VERSION=0.11.0
	THRIFT_NAME=thrift-$THRIFT_VERSION
	THRIFT_SOURCE=$TP_SOURCE_DIR/$THRIFT_NAME

	BISON_VERSION=3.5.4
	BISON_NAME=bison-$BISON_VERSION
	BISON_SOURCE=$TP_SOURCE_DIR/$BISON_NAME

	# Note: The Hive release binary tarball is stripped of unnecessary jars before
	# being uploaded. See thirdparty/package-hive.sh for details.
	# ./thirdparty/package-hive.sh -d -r -v 3.1.2 apache-hive-3.1.2-bin
	HIVE_VERSION=3.1.2
	HIVE_NAME=hive-$HIVE_VERSION
	HIVE_SOURCE=$TP_SOURCE_DIR/$HIVE_NAME

	# Note: The Hadoop release tarball is stripped of unnecessary jars before being
	# uploaded. See thirdparty/package-hadoop.sh for details.
	HADOOP_VERSION=3.2.0
	HADOOP_NAME=hadoop-$HADOOP_VERSION
	HADOOP_SOURCE=$TP_SOURCE_DIR/$HADOOP_NAME

	YAML_VERSION=0.6.2
	YAML_NAME=yaml-cpp-yaml-cpp-$YAML_VERSION
	YAML_SOURCE=$TP_SOURCE_DIR/$YAML_NAME

	CHRONY_VERSION=3.5
	CHRONY_NAME=chrony-$CHRONY_VERSION
	CHRONY_SOURCE=$TP_SOURCE_DIR/$CHRONY_NAME

	# Hash of the gumbo-parser git revision to use.
	# (from https://github.com/google/gumbo-parser)
	#
	# To re-build this tarball use the following in the sparsepp repo:
	# export NAME=gumbo-parser-$(git rev-parse HEAD)
	# git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
	# s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
	GUMBO_PARSER_VERSION=aa91b27b02c0c80c482e24348a457ed7c3c088e0
	GUMBO_PARSER_NAME=gumbo-parser-$GUMBO_PARSER_VERSION
	GUMBO_PARSER_SOURCE=$TP_SOURCE_DIR/$GUMBO_PARSER_NAME

	# Hash of the gumbo-query git revision to use.
	# (from https://github.com/lazytiger/gumbo-query)
	#
	# To re-build this tarball use the following in the sparsepp repo:
	# export NAME=gumbo-query-$(git rev-parse HEAD)
	# git archive HEAD --prefix=$NAME/ -o /tmp/$NAME.tar.gz
	# s3cmd put -P /tmp/$NAME.tar.gz s3://cloudera-thirdparty-libs/$NAME.tar.gz
	GUMBO_QUERY_VERSION=c9f10880b645afccf4fbcd11d2f62a7c01222d2e
	GUMBO_QUERY_NAME=gumbo-query-$GUMBO_QUERY_VERSION
	GUMBO_QUERY_SOURCE=$TP_SOURCE_DIR/$GUMBO_QUERY_NAME

	POSTGRES_VERSION=12.2
	POSTGRES_NAME=postgresql-$POSTGRES_VERSION
	POSTGRES_SOURCE=$TP_SOURCE_DIR/$POSTGRES_NAME

	POSTGRES_JDBC_VERSION=42.2.10
	POSTGRES_JDBC_NAME=postgresql-$POSTGRES_JDBC_VERSION
	POSTGRES_JDBC_SOURCE=$TP_SOURCE_DIR/$POSTGRES_JDBC_NAME

	# If you need to rebuild the tarball for a specific hash instead of a release,
	# run the following commands:
	# mvn versions:set -DnewVersion=$(git rev-parse HEAD)
	# mvn versions:update-child-modules
	# mvn package -DskipTests
	RANGER_VERSION=2.1.0
	RANGER_NAME=ranger-$RANGER_VERSION-admin
	RANGER_SOURCE=$TP_SOURCE_DIR/$RANGER_NAME