// Licensed to the Apache Software Foundation (ASF) under one
// or more contributor license agreements.  See the NOTICE file
// distributed with this work for additional information
// regarding copyright ownership.  The ASF licenses this file
// to you under the Apache License, Version 2.0 (the
// "License"); you may not use this file except in compliance
// with the License.  You may obtain a copy of the License at
//
//   http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing,
// software distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
// KIND, either express or implied.  See the License for the
// specific language governing permissions and limitations
// under the License.

[[installation]]
= Installing Apache Kudu (incubating)

:author: Kudu Team
:imagesdir: ./images
:icons: font
:toc: left
:toclevels: 3
:doctype: book
:backend: html5
:sectlinks:
:experimental:

You can deploy Kudu on a cluster using packages or you can build Kudu
from source. To run Kudu without installing anything, use the link:quickstart.html#quickstart_vm[Kudu Quickstart VM].

NOTE: Kudu is currently easier to install and manage with link:http://www.cloudera.com/content/www/en-us/products/cloudera-manager.html[Cloudera Manager],
version 5.4.7 or newer. If you use Cloudera Manager, see also Cloudera's
link:http://www.cloudera.com/content/www/en-us/documentation/betas/kudu/latest/topics/kudu_installation.html[Kudu documentation].

.Upgrading Kudu
To upgrade Kudu from a previous version, see <<upgrade>>.

== Prerequisites and Requirements
.Hardware
- A host to run the Kudu master.
- One or more hosts to run Kudu tablet servers. When using replication, a minimum of
three tablet servers is necessary.

.Operating System Requirements
Linux::
    - RHEL 6, RHEL 7, Ubuntu 14.04 (Trusty), or SLES 12.
    - A kernel and fileystem that support _hole punching_. Hole punching is the use of the
      `fallocate(2)` system call with the `FALLOC_FL_PUNCH_HOLE` option set. See
      link:troubleshooting.html#req_hole_punching[troubleshooting hole punching] for more
      information.
    - ntp.
OS X::
    - OS X 10.10 Yosemite or OS X 10.11 El Capitan.
    - Prebuilt OS X packages are not provided.
Windows::
    - Microsoft Windows is unsupported.

.Storage
- If solid state storage is available, storing Kudu WALs on such high-performance
media may significantly improve latency when Kudu is configured for its highest
durability levels.

.Management
- If you use Cloudera Manager and CDH, Cloudera Manager 5.4.3 or newer is required.
Cloudera Manager 5.4.7 and newer provide better monitoring and administration options.

[[install_packages]]
== Install Using Packages
You can install Kudu using packages managed by the operating system.

[[kudu_package_locations]]
.Kudu Package Locations
[cols=">s,<,<",options="header"]
|===
| OS  | Repository  | Individual Packages
| RHEL | link:http://archive.cloudera.com/beta/kudu/redhat/6/x86_64/kudu/cloudera-kudu.repo[RHEL 6],
         link:http://archive.cloudera.com/beta/kudu/redhat/7/x86_64/kudu/cloudera-kudu.repo[RHEL 7] |
         link:http://archive.cloudera.com/beta/kudu/redhat/6/x86_64/kudu/0.8.0/RPMS/x86_64/[RHEL 6],
         link:http://archive.cloudera.com/beta/kudu/redhat/7/x86_64/kudu/0.8.0/RPMS/x86_64/[RHEL 7]
| Ubuntu | link:http://archive.cloudera.com/beta/kudu/ubuntu/trusty/amd64/kudu/cloudera.list[Trusty] |  http://archive.cloudera.com/beta/kudu/ubuntu/trusty/amd64/kudu/pool/contrib/k/kudu/[Trusty]
|===

NOTE: For later versions of Ubuntu, the Ubuntu Trusty packages are reported to install, though they have not been extensively tested.

NOTE: packages are not yet provided for SLES.

=== Install On RHEL Hosts

. Download and configure the Kudu repositories for your operating system, or manually
download individual RPMs, using the appropriate link from <<kudu_package_locations>>.

. If using a Yum repository, use the following commands to install Kudu packages on
each host, after saving the `cloudera-kudu.repo` file to `/etc/yum.repos.d/`.
+
----
sudo yum install kudu                         # Base Kudu files
sudo yum install kudu-master                  # Kudu master init.d service script and default configuration
sudo yum install kudu-tserver                 # Kudu tablet server init.d service script and default configuration
sudo yum install kudu-client0                 # Kudu C++ client shared library
sudo yum install kudu-client-devel            # Kudu C++ client SDK
----

. To manually install the Kudu RPMs, first download them, then use the command
`sudo rpm -ivh <RPM to install>` and install the
`kudu-master` and `kudu-tserver` packages on the appropriate hosts. These packages
provide the operating system commands to start and stop Kudu.

=== Install On Ubuntu or Debian Hosts

. If using an Ubuntu or Debian repository, use the following commands to install Kudu
packages on each host after saving the `cloudera.list` file to `/etc/apt/sources.list.d/`.
+
----
sudo apt-get install kudu                     # Base Kudu files
sudo apt-get install kudu-master              # Service scripts for managing kudu-master
sudo apt-get install kudu-tserver             # Service scripts for managing kudu-tserver
sudo apt-get install libkuduclient0           # Kudu C++ client shared library
sudo apt-get install libkuduclient-dev        # Kudu C++ client SDK
----

. To manually install individual DEBs, first download them, then use the command
`sudo dpkg -i <DEB to install>` to install them.

=== Verify the Installation

// tag::verify_install[]
. Verify that services are running using one of the following methods:
  - Examine the output of the `ps` command on servers to verify one or both of `kudu-master`
  or `kudu-tserver` processes is running.
  - Access the Master or Tablet Server web UI by opening `\http://<_host_name_>:8051/`
  for masters
  or `\http://<_host_name_>:8050/` for tablet servers.
. If Kudu isn't running, have a look at the log files in '/var/log/kudu', and if there's a file
  ending with '.FATAL' then it means Kudu wasn't able to start.
  - If the error is 'Error during hole punch test', it might be a problem
    link:troubleshooting.html#req_hole_punching[with your OS].
  - If the error is 'Couldn't get the current time', it's a
    link:troubleshooting.html#ntp[problem with ntp].
  - If it's something else that doesn't seem obvious or if you've tried the above solutions without
    luck, you can ask for help on the
    link:https://groups.google.com/forum/#!forum/kudu-user[user mailing list].

// end::verify_install[]

[[required_config_without_cm]]
=== Required Configuration

Additional configuration steps are required on each host before you can start Kudu services.

. The packages create a `kudu-conf` entry in the operating system's alternatives database,
and they ship the built-in `conf.dist` alternative. To adjust your configuration,
you can either edit the files in `/etc/kudu/conf/` directly, or create a new alternative
using the operating system utilities, make sure it is the link pointed to by `/etc/kudu/conf/`,
and create custom configuration files there. Some parts of the configuration are configured
in `/etc/default/kudu-master` and `/etc/default/kudu-tserver` files as well. You
should include or duplicate these configuration options if you create custom configuration files.
+
Review the configuration, including the default WAL and data directory locations,
and adjust them according to your requirements.

// tag::start_stop[]
. Start Kudu services using the following commands:
+
[source,bash]
----
$ sudo service kudu-master start
$ sudo service kudu-tserver start
----

. To stop Kudu services, use the following commands:
+
[source,bash]
----
$ sudo service kudu-master stop
$ sudo service kudu-tserver stop
----
// end::start_stop[]

. Configure the Kudu services to start automatically when the server starts, by adding
them to the default runlevel.
+
[source,bash]
----
$ sudo chkconfig kudu-master on                # RHEL / CentOS
$ sudo chkconfig kudu-tserver on               # RHEL / CentOS

$ sudo update-rc.d kudu-master defaults        # Debian / Ubuntu
$ sudo update-rc.d kudu-tserver defaults       # Debian / Ubuntu
----

. For additional configuration of Kudu services, see link:configuration.html[Configuring
Kudu].

== Build From Source
If installing Kudu using parcels or packages does not provide the flexibility you
need, you can build Kudu from source. You can build from source on any supported operating system.

[WARNING]
.Known Build Issues
====
* It is not possible to build Kudu on Microsoft Windows.
* A C++11 capable compiler (GCC 4.8+) is required.
====

[[rhel_from_source]]
=== RHEL or CentOS
RHEL or CentOS 6.6 or later is required to build Kudu from source. To build
on a version older than 7.0, the Red Hat Developer Toolset must be installed
(in order to have access to a C++11 capable compiler).

. Install the prerequisite libraries, if they are not installed.
+
----
$ sudo yum install gcc gcc-c++ autoconf automake libtool \
  boost-static boost-devel cyrus-sasl-devel \
  cyrus-sasl-plain patch pkgconfig make rsync vim-common gdb git
----

. If building on RHEL or CentOS older than 7.0, install the Red Hat Developer
Toolset.
+
----
$ DTLS_RPM=rhscl-devtoolset-3-epel-6-x86_64.noarch.rpm
$ DTLS_RPM_URL=https://www.softwarecollections.org/en/scls/rhscl/devtoolset-3/epel-6-x86_64/download/${DTLS_RPM}
$ wget ${DTLS_RPM_URL} -O ${DTLS_RPM}
$ sudo yum install -y scl-utils ${DTLS_RPM}
$ sudo yum install -y devtoolset-3-toolchain
----

. Optional: Install some additional packages, including ruby, if you plan to build documentation.
+
----
$ sudo yum install gem ruby-devel zlib-devel
----

. Clone the Git repository and change to the new `kudu` directory.
+
[source,bash]
----
$ git clone https://github.com/apache/incubator-kudu kudu
$ cd kudu
----

. Build any missing third-party requirements using the `build-if-necessary.sh` script. Not using
the devtoolset will result in `Host compiler appears to require libatomic, but cannot find it.`
+
[source,bash]
----
$ build-support/enable_devtoolset.sh thirdparty/build-if-necessary.sh
----

. Build Kudu, using the utilities installed in the previous step. Choose a build
directory for the intermediate output, which can be anywhere in your filesystem
except for the `kudu` directory itself. Notice that the devtoolset must still be specified,
else you'll get `cc1plus: error: unrecognized command line option "-std=c++11"`.
+
[source,bash]
----
mkdir -p build/release
cd build/release
../../build-support/enable_devtoolset.sh \
  ../../thirdparty/installed/bin/cmake \
  -DCMAKE_BUILD_TYPE=release \
  ../..
make -j4
----

. Optional: Install Kudu binaries, libraries, and headers.
If you do not specify an installation directory through the `DESTDIR`
environment variable, `/usr/local/` is the default.
+
[source,bash]
----
sudo make DESTDIR=/opt/kudu install
----

. Optional: Build the documentation. NOTE: This command builds local documentation that
is not appropriate for uploading to the Kudu website.
+
----
$ make docs
----

.RHEL / CentOS Build Script
====
This script provides an overview of the procedure to build Kudu on a
newly-installed RHEL or CentOS host, and can be used as the basis for an
automated deployment scenario. It skips the steps marked *Optional* above.

[source,bash]
----
#!/bin/bash

sudo yum -y install gcc gcc-c++ autoconf automake libtool \
  boost-static boost-devel cyrus-sasl-devel \
  cyrus-sasl-plain patch pkgconfig make rsync vim-common gdb git
DTLS_RPM=rhscl-devtoolset-3-epel-6-x86_64.noarch.rpm
DTLS_RPM_URL=https://www.softwarecollections.org/en/scls/rhscl/devtoolset-3/epel-6-x86_64/download/${DTLS_RPM}
wget ${DTLS_RPM_URL} -O ${DTLS_RPM}
sudo yum install -y scl-utils ${DTLS_RPM}
sudo yum install -y devtoolset-3-toolchain
cd kudu
build-support/enable_devtoolset.sh thirdparty/build-if-necessary.sh
mkdir -p build/release
cd build/release
../../build-support/enable_devtoolset.sh \
  ../../thirdparty/installed/bin/cmake \
  -DCMAKE_BUILD_TYPE=release \
  ../..
make -j4
----
====

[[ubuntu_from_source]]
=== Ubuntu or Debian

. Install the prerequisite libraries, if they are not installed.
+
----
$ sudo apt-get install git autoconf automake libboost-thread-dev \
  libboost-system-dev curl gcc g++ libsasl2-dev libsasl2-modules \
  libtool ntp patch pkg-config make rsync unzip vim-common gdb python
----

. Optional: Install additional packages to build the documentation
+
----
$ sudo apt-get install xsltproc zlib1g-dev
----

. Clone the Git repository and change to the new `kudu` directory.
+
[source,bash]
----
$ git clone https://github.com/apache/incubator-kudu kudu
$ cd kudu
----

. Build any missing third-party requirements using the `build-if-necessary.sh` script.
+
[source,bash]
----
$ thirdparty/build-if-necessary.sh
----

. Build Kudu, using the utilities installed in the previous step. Choose a build
directory for the intermediate output, which can be anywhere in your filesystem
except for the `kudu` directory itself.
+
[source,bash]
----
mkdir -p build/release
cd build/release
../../thirdparty/installed/bin/cmake -DCMAKE_BUILD_TYPE=release ../..
make -j4
----

. Optional: Install Kudu binaries, libraries, and headers.
If you do not specify an installation directory through the `DESTDIR`
environment variable, `/usr/local/` is the default.
+
[source,bash]
----
sudo make DESTDIR=/opt/kudu install
----

. Optional: Build the documentation. NOTE: This command builds local documentation that
is not appropriate for uploading to the Kudu website.
+
----
$ make docs
----

.Ubuntu / Debian Build Script
====
This script provides an overview of the procedure to build Kudu on Ubuntu, and
can be used as the basis for an automated deployment scenario. It skips
the steps marked *Optional* above.

[source,bash]
----
#!/bin/bash

sudo apt-get -y install git autoconf automake libboost-thread-dev \
  libboost-system-dev curl gcc g++ libsasl2-dev libsasl2-modules \
  libtool ntp patch pkg-config make rsync unzip vim-common gdb python
git clone https://github.com/apache/incubator-kudu kudu
cd kudu
thirdparty/build-if-necessary.sh
mkdir -p build/release
cd build/release
../../thirdparty/installed/bin/cmake \
  -DCMAKE_BUILD_TYPE=release \
  ../..
make -j4
----
====

[[sles_from_source]]
=== SUSE Linux Enterprise Server
Building Kudu on SLES requires building Boost from source, since SLES does not
have system packages containing Boost static libraries. Boost may be built
anywhere, provided that the `BOOST_ROOT` environment variable is set to the
location while invoking CMake to build Kudu. In the instructions below, Boost is
built alongside Kudu.

. Install the prerequisite libraries, if they are not installed.
+
----
$ sudo zypper install autoconf automake curl cyrus-sasl-devel gcc gcc-c++ \
  gdb git libtool make ntp patch pkg-config python rsync unzip vim
----

. Install Boost.
+
----
wget https://downloads.sourceforge.net/project/boost/boost/1.59.0/boost_1_59_0.tar.gz
tar xzf boost_1_59_0.tar.gz
pushd boost_1_59_0
./bootstrap.sh
./b2 --with-system --with-thread
popd
----

. Clone the Git repository and change to the new `kudu` directory.
+
[source,bash]
----
$ git clone https://github.com/apache/incubator-kudu kudu
$ cd kudu
----

. Build any missing third-party requirements using the `build-if-necessary.sh` script.
+
[source,bash]
----
$ thirdparty/build-if-necessary.sh
----

. Build Kudu, using the utilities installed in the previous step. Choose a build
directory for the intermediate output, which can be anywhere in your filesystem
except for the `kudu` directory itself.
+
[source,bash]
----
mkdir -p build/release
cd build/release
BOOST_ROOT=../../../boost_1_59_0 \
  ../../thirdparty/installed/bin/cmake \
  -DCMAKE_BUILD_TYPE=release \
  ../..
make -j4
----

. Optional: Install Kudu binaries, libraries, and headers.
If you do not specify an installation directory through the `DESTDIR`
environment variable, `/usr/local/` is the default.
+
[source,bash]
----
sudo make DESTDIR=/opt/kudu install
----

.SLES Build Script
====
This script provides an overview of the procedure to build Kudu on SLES, and
can be used as the basis for an automated deployment scenario. It skips
the steps marked *Optional* above.

[source,bash]
----
#!/bin/bash

sudo zypper install autoconf automake curl cyrus-sasl-devel gcc gcc-c++ \
  gdb git libtool make ntp patch pkg-config python rsync unzip vim
wget https://downloads.sourceforge.net/project/boost/boost/1.59.0/boost_1_59_0.tar.gz
tar xzf boost_1_59_0.tar.gz
pushd boost_1_59_0
./bootstrap.sh
./b2 --with-system --with-thread
popd
git clone https://github.com/apache/incubator-kudu kudu
cd kudu
thirdparty/build-if-necessary.sh
mkdir -p build/release
cd build/release
BOOST_ROOT=../../../boost_1_59_0 \
  ../../thirdparty/installed/bin/cmake \
  -DCMAKE_BUILD_TYPE=release \
  ../..
make -j4
----
====

[[osx_from_source]]
=== OS X
The Xcode toolchain is necessary for compiling Kudu. Use `xcode-select --install`
to install the Xcode Command Line Tools if Xcode is not already installed. These
instructions use link:http://brew.sh/[Homebrew] to install dependencies, but
manual dependency installation is possible.

[WARNING]
.OS X Known Issues
====
Kudu support for OS X is experimental, and should only be used for development.
See link:https://issues.cloudera.org/browse/KUDU-1219[OS X Limitations & Known Issues]
for more information.
====

. Install the prerequisite libraries, if they are not installed.
+
----
$ brew install autoconf automake cmake libtool pkg-config boost pstree
----

. Clone the Git repository and change to the new `kudu` directory.
+
[source,bash]
----
$ git clone https://github.com/apache/incubator-kudu kudu
$ cd kudu
----

. Build any missing third-party requirements using the `build-if-necessary.sh` script.
+
[source,bash]
----
$ thirdparty/build-if-necessary.sh
----

. Build Kudu. Choose a build directory for the intermediate output, which can be
anywhere in your filesystem except for the `kudu` directory itself.
+
[source,bash]
----
mkdir -p build/release
cd build/release
../../thirdparty/installed/bin/cmake -DCMAKE_BUILD_TYPE=release ../..
make -j4
----

.OSX Build Script
====
This script provides an overview of the procedure to build Kudu on OSX, and can
be used as the basis for an automated deployment scenario. It assumes Xcode and Homebrew
are installed.

----
#!/bin/bash

brew install autoconf automake cmake libtool pkg-config boost pstree
git clone https://github.com/apache/incubator-kudu kudu
cd kudu
thirdparty/build-if-necessary.sh
mkdir -p build/release
cd build/release
../../thirdparty/installed/bin/cmake -DCMAKE_BUILD_TYPE=release ../..
make -j4
----
====

[[build_cpp_client]]
== Installing the C++ Client Libraries

If you need access to the Kudu client libraries for development,
install the `kudu-client` and `kudu-client-devel` package for your platform.
See <<install_packages>>.

WARNING: Only build against the client libraries and headers (`kudu_client.so` and `client.h`).
Other libraries and headers are internal to Kudu and have no stability guarantees.

[[build_java_client]]
== Build the Java Client

.Requirements
- JDK 7
- Apache Maven 3.x
- `protoc` 2.6 or newer installed in your path, or built from the `thirdparty/` directory.
You can run the following commands to build `protoc` from the third-party dependencies:
[source,bash]
----
$ thirdparty/download-thirdparty.sh
$ thirdparty/build-thirdparty.sh protobuf
----

To build the Java client, clone the Kudu Git
repository, change to the `java` directory, and issue the following command:

[source,bash]
----
$ mvn install -DskipTests
----

For more information about building the Java API, as well as Eclipse integration,
see `java/README.md`.

[[view_api]]
== View API Documentation

// tag::view_api[]
.C++ API Documentation
The documentation for the C++ client APIs is included in the header files in
`/usr/include/kudu/` if you installed Kudu using packages or subdirectories
of `src/kudu/client/` if you built Kudu from source. If you installed Kudu using parcels,
no headers are included in your installation. and you will need to <<build_kudu,build
Kudu from source>> in order to have access to the headers and shared libraries.

The following command is a naive approach to finding relevant header files. Use
of any APIs other than the client APIs is unsupported.

[source,bash]
----
$ find /usr/include/kudu -type f -name *.h
----

.Java API Documentation
You can view the link:../apidocs/index.html[Java API documentation] online. Alternatively,
after <<build_java_client,building the Java client>>, Java API documentation is available
in `java/kudu-client/target/apidocs/index.html`.
// end::view_api[]

[[upgrade]]
== Upgrade from 0.8.0 to 0.9.0

Before upgrading, see <<client_compatibility>> and <<api_compatibility>>.
To upgrade from Kudu 0.8.0 to 0.9.0, perform the following high-level steps, which
are detailed in <<upgrade_procedure>>:

. Shut down all Kudu services.
. Install the new Kudu packages or parcels, or install Kudu 0.9.0 from source.
. Restart all Kudu services.

It is technically possible to upgrade Kudu using rolling restarts, but it has not
been tested and is not recommended.

NOTE: For the duration of the Kudu Beta, upgrade instructions are only given for going
from the previous latest version to the newest.

[[client_compatibility]]
=== Client compatibility

Masters and tablet servers should be upgraded before clients are upgraded. For specific
information about client compatibility, see the
link:release_notes.html#rn_0.9.0_incompatible_changes[Incompatible Changes] section
of the release notes.

[[api_compatibility]]

=== API Compatibility

In Kudu 0.9 and higher, you must set partitioning options explicitly when
creating a new table. If you do not specify partitioning options, the table
creation will fail. This behavior change does not affect existing tables.

[[upgrade_procedure]]
=== Upgrade procedure

. Stop the Kudu master and tablet server services:
+
[source,bash]
----
$ sudo service kudu-master stop
$ sudo service kudu-tserver stop
----

. Upgrade the packages.
 - On RHEL or CentOS hosts:
+
[source,bash]
----
sudo yum clean all
sudo yum upgrade kudu
----
 - On Ubuntu or Debian hosts:
+
[source,bash]
----
sudo apt-get update
sudo apt-get install kudu
----

. Start the Kudu master and tablet server services:
+
[source,bash]
----
$ sudo service kudu-master start
$ sudo service kudu-tserver start
----

[[next_steps]]
== Next Steps
- link:configuration.html[Configuring Kudu]
- link:administration.html[Kudu Administration]