#!/bin/sh
#
#    Licensed to the Apache Software Foundation (ASF) under one or more
#    contributor license agreements.  See the NOTICE file distributed with
#    this work for additional information regarding copyright ownership.
#    The ASF licenses this file to You under the Apache License, Version 2.0
#    (the "License"); you may not use this file except in compliance with
#    the License.  You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
#    Unless required by applicable law or agreed to in writing, software
#    distributed under the License is distributed on an "AS IS" BASIS,
#    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#    See the License for the specific language governing permissions and
#    limitations under the License.
#

DIRNAME=`dirname "$0"`
PROGNAME=`basename "$0"`

#
# Sourcing environment settings for karaf similar to tomcats setenv
#
export KARAF_SCRIPT="shell"
if [ -e "$DIRNAME/setenv" ]; then
  . "$DIRNAME/setenv"
fi

#
# Check/Set up some easily accessible MIN/MAX params for JVM mem usage
#
if [ "x$JAVA_MIN_MEM" = "x" ]; then
    JAVA_MIN_MEM=128M
    export JAVA_MIN_MEM
fi
if [ "x$JAVA_MAX_MEM" = "x" ]; then
    JAVA_MAX_MEM=512M
    export JAVA_MAX_MEM
fi
if [ "x$JAVA_PERM_MEM" = "x" ]; then
    JAVA_PERM_MEM=16M
    export JAVA_PERM_MEM
fi
if [ "x$JAVA_MAX_PERM_MEM" = "x" ]; then
    JAVA_MAX_PERM_MEM=128M
    export JAVA_MAX_PERM_MEM
fi

warn() {
    echo "${PROGNAME}: $*"
}

die() {
    warn "$*"
    exit 1
}

detectOS() {
    # OS specific support (must be 'true' or 'false').
    cygwin=false;
    darwin=false;
    aix=false;
    os400=false;
    case "`uname`" in
        CYGWIN*)
            cygwin=true
            ;;
        Darwin*)
            darwin=true
            ;;
        AIX*)
            aix=true
            ;;
        OS400*)
            os400=true
            ;;
    esac
    # For AIX, set an environment variable
    if $aix; then
         export LDR_CNTRL=MAXDATA=0xB0000000@DSA
         export IBM_JAVA_HEAPDUMP_TEXT=true
         echo $LDR_CNTRL
    fi
}

unlimitFD() {
    # Use the maximum available, or set MAX_FD != -1 to use that
    if [ "x$MAX_FD" = "x" ]; then
        MAX_FD="maximum"
    fi

    # Increase the maximum file descriptors if we can
    if [ "$os400" = "false" ] && [ "$cygwin" = "false" ]; then
        MAX_FD_LIMIT=`ulimit -H -n`
        if [ "$MAX_FD_LIMIT" != 'unlimited' ]; then 
            if [ $? -eq 0 ]; then
                if [ "$MAX_FD" = "maximum" -o "$MAX_FD" = "max" ]; then
                    # use the system max
                    MAX_FD="$MAX_FD_LIMIT"
                fi

                ulimit -n $MAX_FD > /dev/null
                # echo "ulimit -n" `ulimit -n`
                if [ $? -ne 0 ]; then
                    warn "Could not set maximum file descriptor limit: $MAX_FD"
                fi
            else
                warn "Could not query system maximum file descriptor limit: $MAX_FD_LIMIT"
            fi
        fi
    fi
}

locateHome() {
    if [ "x$KARAF_HOME" != "x" ]; then
        warn "Ignoring predefined value for KARAF_HOME"
    fi

    # In POSIX shells, CDPATH may cause cd to write to stdout
    (unset CDPATH) >/dev/null 2>&1 && unset CDPATH

    KARAF_HOME=`cd $DIRNAME/..; pwd`
    if [ ! -d "$KARAF_HOME" ]; then
        die "KARAF_HOME is not valid: $KARAF_HOME"
    fi
}

locateBase() {
    if [ "x$KARAF_BASE" != "x" ]; then
        if [ ! -d "$KARAF_BASE" ]; then
            die "KARAF_BASE is not valid: $KARAF_BASE"
        fi
    else
        KARAF_BASE=$KARAF_HOME
    fi
}

locateData() {
    if [ "x$KARAF_DATA" != "x" ]; then
        if [ ! -d "$KARAF_DATA" ]; then
            die "KARAF_DATA is not valid: $KARAF_DATA"
        fi
    else
        KARAF_DATA=$KARAF_BASE/data
    fi
}

setupNativePath() {
    # Support for loading native libraries
    LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:$KARAF_BASE/lib:$KARAF_HOME/lib"

    # For Cygwin, set PATH from LD_LIBRARY_PATH
    if $cygwin; then
        LD_LIBRARY_PATH=`cygpath --path --windows "$LD_LIBRARY_PATH"`
        PATH="$PATH;$LD_LIBRARY_PATH"
        export PATH
    fi
    export LD_LIBRARY_PATH
}

pathCanonical() {
    local dst="${1}"
    while [ -h "${dst}" ] ; do
        ls=`ls -ld "${dst}"`
        link=`expr "$ls" : '.*-> \(.*\)$'`
        if expr "$link" : '/.*' > /dev/null; then
            dst="$link"
        else
            dst="`dirname "${dst}"`/$link"
        fi
    done
    local bas=`basename "${dst}"`
    local dir=`dirname "${dst}"`
    if [ "$bas" != "$dir" ]; then
        dst="`pathCanonical "$dir"`/$bas"
    fi
    echo "${dst}" | sed -e 's#//#/#g' -e 's#/./#/#g' -e 's#/[^/]*/../#/#g'
}

locateJava() {
    # Setup the Java Virtual Machine
    if $cygwin ; then
        [ -n "$JAVA" ] && JAVA=`cygpath --unix "$JAVA"`
        [ -n "$JAVA_HOME" ] && JAVA_HOME=`cygpath --unix "$JAVA_HOME"`
    fi

    if [ "x$JAVA_HOME" = "x" ] && [ "$darwin" = "true" ]; then
        JAVA_HOME=/System/Library/Frameworks/JavaVM.framework/Home
    fi
    if [ "x$JAVA" = "x" ] && [ -r /etc/gentoo-release ] ; then
        JAVA_HOME=`java-config --jre-home`
    fi
    if [ "x$JAVA" = "x" ]; then
        if [ "x$JAVA_HOME" != "x" ]; then
            if [ ! -d "$JAVA_HOME" ]; then
                die "JAVA_HOME is not valid: $JAVA_HOME"
            fi
            JAVA="$JAVA_HOME/bin/java"
        else
            warn "JAVA_HOME not set; results may vary"
            JAVA=`type java`
            JAVA=`expr "$JAVA" : '.*is \(.*\)$'`
            if [ "x$JAVA" = "x" ]; then
                die "java command not found"
            fi
        fi
    fi
    if [ "x$JAVA_HOME" = "x" ]; then
        JAVA_HOME="$(dirname $(dirname $(pathCanonical "$JAVA")))"
    fi
}

detectJVM() {
   #echo "`$JAVA -version`"
   # This service should call `java -version`,
   # read stdout, and look for hints
   if $JAVA -version 2>&1 | grep "^IBM" ; then
       JVM_VENDOR="IBM"
   # on OS/400, java -version does not contain IBM explicitly
   elif $os400; then
       JVM_VENDOR="IBM"
   else
       JVM_VENDOR="SUN"
   fi
   # echo "JVM vendor is $JVM_VENDOR"
}

setupDebugOptions() {
    if [ "x$JAVA_OPTS" = "x" ]; then
        JAVA_OPTS="$DEFAULT_JAVA_OPTS"
    fi
    export JAVA_OPTS

    # Set Debug options if enabled
    if [ "x$KARAF_DEBUG" != "x" ]; then
        # Use the defaults if JAVA_DEBUG_OPTS was not set
        if [ "x$JAVA_DEBUG_OPTS" = "x" ]; then
            JAVA_DEBUG_OPTS="$DEFAULT_JAVA_DEBUG_OPTS"
        fi

        JAVA_OPTS="$JAVA_DEBUG_OPTS $JAVA_OPTS"
        warn "Enabling Java debug options: $JAVA_DEBUG_OPTS"
    fi
}

setupDefaults() {
    DEFAULT_JAVA_OPTS="-Xms$JAVA_MIN_MEM -Xmx$JAVA_MAX_MEM "

    #Set the JVM_VENDOR specific JVM flags
    if [ "$JVM_VENDOR" = "SUN" ]; then
        DEFAULT_JAVA_OPTS="-server $DEFAULT_JAVA_OPTS -Dcom.sun.management.jmxremote"
    elif [ "$JVM_VENDOR" = "IBM" ]; then
        if $os400; then
            DEFAULT_JAVA_OPTS="$DEFAULT_JAVA_OPTS"
        elif $aix; then
            DEFAULT_JAVA_OPTS="-Xverify:none -Xlp $DEFAULT_JAVA_OPTS"
        else
            DEFAULT_JAVA_OPTS="-Xverify:none $DEFAULT_JAVA_OPTS"
        fi
    fi

    # Setup classpath
    CLASSPATH="$KARAF_HOME/system/org/apache/karaf/shell/org.apache.karaf.shell.console/${project.version}/org.apache.karaf.shell.console-${project.version}.jar"
    CLASSPATH="$CLASSPATH:$KARAF_HOME/system/org/ops4j/pax/logging/pax-logging-api/${pax.logging.version}/pax-logging-api-${pax.logging.version}.jar"
    CLASSPATH="$CLASSPATH:$(find "$KARAF_HOME/system/" -name '*.jar' |xargs echo  |tr ' ' ':')"

    DEFAULT_JAVA_DEBUG_OPTS="-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5005"

    ##
    ## TODO: Move to conf/profiler/yourkit.{sh|cmd}
    ##
    # Uncomment to enable YourKit profiling
    #DEFAULT_JAVA_DEBUG_OPTS="-Xrunyjpagent"
}

init() {
    # Determine if there is special OS handling we must perform
    detectOS

    # Unlimit the number of file descriptors if possible
    unlimitFD

    # Locate the Karaf home directory
    locateHome

    # Locate the Karaf base directory
    locateBase

    # Locate the Karaf data directory
    locateData

    # Setup the native library path
    setupNativePath

    # Locate the Java VM to execute
    locateJava

    # Determine the JVM vendor
    detectJVM

    # Setup default options
    setupDefaults

    # Install debug options
    setupDebugOptions

}

run() {

    if $cygwin; then
        KARAF_HOME=`cygpath --path --windows "$KARAF_HOME"`
        KARAF_BASE=`cygpath --path --windows "$KARAF_BASE"`
        CLASSPATH=`cygpath --path --windows "$CLASSPATH"`
    fi

    exec $JAVA $JAVA_OPTS -Dkaraf.instances="${KARAF_HOME}/instances" -Dkaraf.home="$KARAF_HOME" -Dkaraf.base="$KARAF_BASE" -Djava.io.tmpdir="$KARAF_DATA/tmp" -Djava.util.logging.config.file=$KARAF_BASE/etc/java.util.logging.properties $KARAF_OPTS $OPTS -classpath "$CLASSPATH" org.apache.karaf.shell.console.Main --classpath="$KARAF_HOME/system" "$@"
}

main() {
    init
    run "$@"
}

main "$@"