juddi-examples/juddi-embedded/juddi-server.xml - juddi - Git at Google

 <?xml version="1.0" encoding="UTF-8"  ?>
 <!--
 * Copyright 2001-2009 The Apache Software Foundation.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICenSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
 */ -->
 <!--
 ################################################################
 #                 jUDDI-v3.0 configuration.                    #
 ################################################################
 # Note that the property settings in this                      #
 # file can be overriden by system parameters                   #
 #                                                              #
 ################################################################
 -->
 <config>
 	<juddi>
 		<!-- The ${juddi.server.baseurl} token can be referenced in accessPoints and will be resolved at runtime. -->
 		<server>
 			<baseurl>http://localhost:8080/juddiv3</baseurl>
 			<baseurlsecure>https://localhost:8443/juddiv3</baseurlsecure>
 		</server>
 		<!-- The node Id must be unique when setup in a cluster of UDDI servers implementing the replication API
 			don't worry, jUDDI doesn't implement it right now, but it may come in the future -->
 		<nodeId>uddi:juddi.apache.org:node1</nodeId>
 		<!-- The key of the root business that all of the UDDI services are registered in, as defined in the install_data -->
 		<root>
 			<!-- this is the 'root' username, or owner of the node -->
 			<publisher>root</publisher>
 			<!-- The key of the root business that all of the UDDI services are registered in, as defined in the install_data -->
 			<businessId>uddi:juddi.apache.org:businesses-asf</businessId>
 			<partition>uddi:juddi.apache.org</partition>
 		</root>
 		<seed>
 			<always>false</always>
 		</seed>

 		<!-- Name of the persistence unit to use (the default, "juddiDatabase" refers to the unit compiled into the juddi library)-->
 		<persistenceunit>
 			<name>juddiDatabase</name>
 		</persistenceunit>

 		<!-- Check-the-time-stamp-on-this-file Interval in milli seconds  -->
 		<configuration>
 			<reload>
 				<delay>2000</delay>
 			</reload>
 		</configuration>
 		<!--Default locale-->
 		<locale>en_US</locale>

 		<!--The UDDI Operator Contact Email Address-->
 		<operatorEmailAddress>admin@local.localhost</operatorEmailAddress>

 		<!-- The maximum name size and maximum number of name elements allows in several of the FindXxxx and SaveXxxx UDDI functions.-->
 		<maxNameLength>255</maxNameLength>
 		<maxNameElementsAllowed>5</maxNameElementsAllowed>


 		<!-- The maximum number of rows returned in a find_* operation.  Each call can set this independently, but this property defines a global maximum.-->
 		<maxRows>1000</maxRows>
 		<!-- The maximum number of "IN" clause parameters.  Some RDMBS limit the number of parameters allowed in a SQL "IN" clause.-->
 		<maxInClause>1000</maxInClause>

 		<!-- The maximum number of UDDI artifacts allowed per publisher. A value of '-1' indicates any  number of artifacts is valid (These values can be overridden at the individual publisher level).-->
 		<maxBusinessesPerPublisher>100</maxBusinessesPerPublisher>
 		<maxServicesPerBusiness>100</maxServicesPerBusiness>
 		<maxBindingsPerService>100</maxBindingsPerService>
 		<maxTModelsPerPublisher>100</maxTModelsPerPublisher>

 		<!-- Days before a transfer request expires-->
 		<transfer>
 			<expiration>
 				<days>3</days>
 			</expiration>
 		</transfer>

 		<!-- Days before a subscription expires-->
 		<subscription>
 			<expiration>
 				<days>30</days>
 			</expiration>

 			<!-- Minutes before a "chunked" subscription call expires-->
 			<chunkexpiration>
 				<minutes>5</minutes>
 			</chunkexpiration>

 			<!--Since 3.1.5 the maxium ammount of returned subscription entities allowed-->
 			<maxentities>1000</maxentities>
 		</subscription>

 		<!-- jUDDI UUIDGen implementation to use-->
 		<uuidgen>org.apache.juddi.uuidgen.DefaultUUIDGen</uuidgen>

 		<!-- jUDDI Cryptor implementation to use-->
 		<cryptor>org.apache.juddi.v3.client.cryptor.DefaultCryptor</cryptor>

 		<!-- jUDDI Key Generator to use-->
 		<keygenerator>org.apache.juddi.keygen.DefaultKeyGenerator</keygenerator>

 		<notification>
 			<!-- Specifies the interval at which the notification timer triggers-->
 			<interval>5000</interval>
 			<!-- Specifies the amount of time to wait before the notification timer initially fires-->
 			<start>
 				<buffer>0</buffer>
 			</start>
 			<acceptableLagtime>1000</acceptableLagtime>
 			<maxTries>3</maxTries>
 			<!-- 10 minutes -->
 			<maxTriesResetInterval>600000</maxTriesResetInterval>
 			<sendAuthTokenWithResultList>false</sendAuthTokenWithResultList>
 		</notification>
 		<!-- All Authentication related settings -->
 		<auth>
 			<!-- Specifies whether the inquiry API requires authentication, all other APIs require authN-->
 			<Inquiry>false</Inquiry>

 			<!-- When using file based authentication, this is the filename to use
 			<usersfile>juddi-users.xml</usersfile>-->
 			<!-- jUDDI Authentication module to use-->
 			<authenticator>
 				<!-- build in Authenticators:
 				org.apache.juddi.v3.auth.JUDDIAuthenticator - no authentication
 				LDAP Based
 				org.apache.juddi.v3.auth.LdapSimpleAuthenticator - use LDAP
 				org.apache.juddi.v3.auth.LdapExpandedAuthenticator - use LDAP

 				File based, see usersfile
 				org.apache.juddi.v3.auth.XMLDocAuthenticator - XML doc, clear text
 				org.apache.juddi.v3.auth.CryptedXMLDocAuthenticator - XML doc, encrypted
 				org.apache.juddi.v3.auth.MD5XMLDocAuthenticator - XML doc, Hashed

                                 See also, the Jboss Authenticator
 				-->
 				<class>org.apache.juddi.v3.auth.JUDDIAuthenticator</class>
 				<!-- other settings (mostly used by Ldap based auth mods
 				url
 				initialcontext
 				style
 				ldapexp
 				-->
 			</authenticator>

 			<token>
 				<!-- Time in minutes to expire tokes after inactivity-->
 				<Timeout>30</Timeout>
 				<!-- As of 3.1.5 Duration of time for tokens to expire, regardless of inactivity -->
 				<Expiration>30</Expiration>
 				<!-- As of 3.2, when set to true, tokens can only be used from the same IP address they were issued to -->
 				<enforceSameIPRule>true</enforceSameIPRule>
 			</token>
 		</auth>


 		<validation>
 			<!-- As of 3.1.5 This setting will force referential integrity for all tModels (except keyGenerators), category bags, bindingTemplate/AccessPoint/hostingRedirector (referencing another host), tModelinstanceparms and anything else that references a KeyName default value is true.  set to false for backwards compatibility or for a more lax registry-->
 			<enforceReferentialIntegrity>true</enforceReferentialIntegrity>
                         <!-- as of 3.3, reject digitally signed items that are invalid-->
                         <rejectInvalidSignatures>
                             <enable>false</enable>
                             <trustStorePath>truststore.jks</trustStorePath>
                             <trustStoreType>JKS</trustStoreType>
                             <trustStorePassword
                                     isPasswordEncrypted="false"
                                     cryptoProvider="org.apache.juddi.v3.client.crypto.AES128Cryptor">Test</trustStorePassword>

                             <checkTimestamps>true</checkTimestamps>
                             <checkTrust>true</checkTrust>
                             <checkRevocationCRL>false</checkRevocationCRL>
                         </rejectInvalidSignatures>
 		</validation>

 		<!--As of 3.1.5 Email delivery options for subscription API functions-->
 		<mail>
 			<smtp>
 				<!--The Operator’s Email address
 				<from>admin@local.localhost</from>-->

 				<!--the hostname of the SMTP server
 				<host>localhost</host>-->

 				<!--The portname of the SMTP server
 				<port>25</port>-->

 				<!--If set, specifies the name of a class that implements the javax.net.SocketFactory interface. This class will be used to create SMTP sockets.-->
 				<socketFactory>
 					<!--<class></class>-->

 					<!--If set to true, failure to create a socket using the specified socket factory class will cause the socket to be created using the java.net.Socket class. Defaults to true.
 					<fallback>true</fallback>-->
 					<!--Specifies the port to connect to when using the specified socket factory. If not set, the default port will be used.
 					<port>25</port>-->
 				</socketFactory>
 				<!--if true, enables the use of the STARTTLS command (if supported by the server) to switch the connection to a TLS-protected connection before issuing any login commands. Note that an appropriate trust store must configured so that the client will trust the server’s certificate. Defaults to false.
 				<starttls>
 					<enabled>false</enabled>
 				</starttls>-->

 				<!--If true, attempt to authenticate the user using the AUTH command. Defaults to false.
 				<auth>false</auth>-->

 				<!--Username used to authenticate to the SMTP server used only if mail.smtp.auth is true
 				<user>user</user>-->

 				<!--Password used to authenticate to the SMTP server, used only if mail.smtp.auth is true
 				<password encrypted="false">pass</password>-->
 			</smtp>
 		</mail>
 	</juddi>
 </config>
	<?xml version="1.0" encoding="UTF-8" ?>
	<!--
	* Copyright 2001-2009 The Apache Software Foundation.
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICenSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*
	*/ -->
	<!--
	################################################################
	# jUDDI-v3.0 configuration. #
	################################################################
	# Note that the property settings in this #
	# file can be overriden by system parameters #
	# #
	################################################################
	-->
	<config>
	<juddi>
	<!-- The ${juddi.server.baseurl} token can be referenced in accessPoints and will be resolved at runtime. -->
	<server>
	<baseurl>http://localhost:8080/juddiv3</baseurl>
	<baseurlsecure>https://localhost:8443/juddiv3</baseurlsecure>
	</server>
	<!-- The node Id must be unique when setup in a cluster of UDDI servers implementing the replication API
	don't worry, jUDDI doesn't implement it right now, but it may come in the future -->
	<nodeId>uddi:juddi.apache.org:node1</nodeId>
	<!-- The key of the root business that all of the UDDI services are registered in, as defined in the install_data -->
	<root>
	<!-- this is the 'root' username, or owner of the node -->
	<publisher>root</publisher>
	<!-- The key of the root business that all of the UDDI services are registered in, as defined in the install_data -->
	<businessId>uddi:juddi.apache.org:businesses-asf</businessId>
	<partition>uddi:juddi.apache.org</partition>
	</root>
	<seed>
	<always>false</always>
	</seed>

	<!-- Name of the persistence unit to use (the default, "juddiDatabase" refers to the unit compiled into the juddi library)-->
	<persistenceunit>
	<name>juddiDatabase</name>
	</persistenceunit>

	<!-- Check-the-time-stamp-on-this-file Interval in milli seconds -->
	<configuration>
	<reload>
	<delay>2000</delay>
	</reload>
	</configuration>
	<!--Default locale-->
	<locale>en_US</locale>

	<!--The UDDI Operator Contact Email Address-->
	<operatorEmailAddress>admin@local.localhost</operatorEmailAddress>

	<!-- The maximum name size and maximum number of name elements allows in several of the FindXxxx and SaveXxxx UDDI functions.-->
	<maxNameLength>255</maxNameLength>
	<maxNameElementsAllowed>5</maxNameElementsAllowed>


	<!-- The maximum number of rows returned in a find_* operation. Each call can set this independently, but this property defines a global maximum.-->
	<maxRows>1000</maxRows>
	<!-- The maximum number of "IN" clause parameters. Some RDMBS limit the number of parameters allowed in a SQL "IN" clause.-->
	<maxInClause>1000</maxInClause>

	<!-- The maximum number of UDDI artifacts allowed per publisher. A value of '-1' indicates any number of artifacts is valid (These values can be overridden at the individual publisher level).-->
	<maxBusinessesPerPublisher>100</maxBusinessesPerPublisher>
	<maxServicesPerBusiness>100</maxServicesPerBusiness>
	<maxBindingsPerService>100</maxBindingsPerService>
	<maxTModelsPerPublisher>100</maxTModelsPerPublisher>

	<!-- Days before a transfer request expires-->
	<transfer>
	<expiration>
	<days>3</days>
	</expiration>
	</transfer>

	<!-- Days before a subscription expires-->
	<subscription>
	<expiration>
	<days>30</days>
	</expiration>

	<!-- Minutes before a "chunked" subscription call expires-->
	<chunkexpiration>
	<minutes>5</minutes>
	</chunkexpiration>

	<!--Since 3.1.5 the maxium ammount of returned subscription entities allowed-->
	<maxentities>1000</maxentities>
	</subscription>

	<!-- jUDDI UUIDGen implementation to use-->
	<uuidgen>org.apache.juddi.uuidgen.DefaultUUIDGen</uuidgen>

	<!-- jUDDI Cryptor implementation to use-->
	<cryptor>org.apache.juddi.v3.client.cryptor.DefaultCryptor</cryptor>

	<!-- jUDDI Key Generator to use-->
	<keygenerator>org.apache.juddi.keygen.DefaultKeyGenerator</keygenerator>

	<notification>
	<!-- Specifies the interval at which the notification timer triggers-->
	<interval>5000</interval>
	<!-- Specifies the amount of time to wait before the notification timer initially fires-->
	<start>
	<buffer>0</buffer>
	</start>
	<acceptableLagtime>1000</acceptableLagtime>
	<maxTries>3</maxTries>
	<!-- 10 minutes -->
	<maxTriesResetInterval>600000</maxTriesResetInterval>
	<sendAuthTokenWithResultList>false</sendAuthTokenWithResultList>
	</notification>
	<!-- All Authentication related settings -->
	<auth>
	<!-- Specifies whether the inquiry API requires authentication, all other APIs require authN-->
	<Inquiry>false</Inquiry>

	<!-- When using file based authentication, this is the filename to use
	<usersfile>juddi-users.xml</usersfile>-->
	<!-- jUDDI Authentication module to use-->
	<authenticator>
	<!-- build in Authenticators:
	org.apache.juddi.v3.auth.JUDDIAuthenticator - no authentication
	LDAP Based
	org.apache.juddi.v3.auth.LdapSimpleAuthenticator - use LDAP
	org.apache.juddi.v3.auth.LdapExpandedAuthenticator - use LDAP

	File based, see usersfile
	org.apache.juddi.v3.auth.XMLDocAuthenticator - XML doc, clear text
	org.apache.juddi.v3.auth.CryptedXMLDocAuthenticator - XML doc, encrypted
	org.apache.juddi.v3.auth.MD5XMLDocAuthenticator - XML doc, Hashed

	See also, the Jboss Authenticator
	-->
	<class>org.apache.juddi.v3.auth.JUDDIAuthenticator</class>
	<!-- other settings (mostly used by Ldap based auth mods
	url
	initialcontext
	style
	ldapexp
	-->
	</authenticator>

	<token>
	<!-- Time in minutes to expire tokes after inactivity-->
	<Timeout>30</Timeout>
	<!-- As of 3.1.5 Duration of time for tokens to expire, regardless of inactivity -->
	<Expiration>30</Expiration>
	<!-- As of 3.2, when set to true, tokens can only be used from the same IP address they were issued to -->
	<enforceSameIPRule>true</enforceSameIPRule>
	</token>
	</auth>




	<validation>
	<!-- As of 3.1.5 This setting will force referential integrity for all tModels (except keyGenerators), category bags, bindingTemplate/AccessPoint/hostingRedirector (referencing another host), tModelinstanceparms and anything else that references a KeyName default value is true. set to false for backwards compatibility or for a more lax registry-->
	<enforceReferentialIntegrity>true</enforceReferentialIntegrity>
	<!-- as of 3.3, reject digitally signed items that are invalid-->
	<rejectInvalidSignatures>
	<enable>false</enable>
	<trustStorePath>truststore.jks</trustStorePath>
	<trustStoreType>JKS</trustStoreType>
	<trustStorePassword
	isPasswordEncrypted="false"
	cryptoProvider="org.apache.juddi.v3.client.crypto.AES128Cryptor">Test</trustStorePassword>

	<checkTimestamps>true</checkTimestamps>
	<checkTrust>true</checkTrust>
	<checkRevocationCRL>false</checkRevocationCRL>
	</rejectInvalidSignatures>
	</validation>

	<!--As of 3.1.5 Email delivery options for subscription API functions-->
	<mail>
	<smtp>
	<!--The Operator’s Email address
	<from>admin@local.localhost</from>-->

	<!--the hostname of the SMTP server
	<host>localhost</host>-->

	<!--The portname of the SMTP server
	<port>25</port>-->

	<!--If set, specifies the name of a class that implements the javax.net.SocketFactory interface. This class will be used to create SMTP sockets.-->
	<socketFactory>
	<!--<class></class>-->

	<!--If set to true, failure to create a socket using the specified socket factory class will cause the socket to be created using the java.net.Socket class. Defaults to true.
	<fallback>true</fallback>-->
	<!--Specifies the port to connect to when using the specified socket factory. If not set, the default port will be used.
	<port>25</port>-->
	</socketFactory>
	<!--if true, enables the use of the STARTTLS command (if supported by the server) to switch the connection to a TLS-protected connection before issuing any login commands. Note that an appropriate trust store must configured so that the client will trust the server’s certificate. Defaults to false.
	<starttls>
	<enabled>false</enabled>
	</starttls>-->

	<!--If true, attempt to authenticate the user using the AUTH command. Defaults to false.
	<auth>false</auth>-->

	<!--Username used to authenticate to the SMTP server used only if mail.smtp.auth is true
	<user>user</user>-->

	<!--Password used to authenticate to the SMTP server, used only if mail.smtp.auth is true
	<password encrypted="false">pass</password>-->
	</smtp>
	</mail>
	</juddi>
	</config>