Oak offers a few tools which can be used to migrate the old, Jackrabbit 2 repository and also to copy content between Oak instances. oak-upgrade
is a Swiss army knife for copying content between virtually any repositories. On the other hand, the SplitBlobStore
allows to copy the binaries gradually, from one blob store to another, without having a long repository downtime.
The oak-upgrade
module allows to do an upgrade from the classic Jackrabbit 2.0 repository to the Oak node store and also to sidegrade from one nodestore type to another. Besides from that it has a number of features that can be useful in everyday system maintenance:
oak-upgrade
module creates an executable jar file. It can be invoked like this:
java -jar oak-upgrade-*.jar [options] source destination
The source
and destination
are the node store paths/URIs. Following node stores are supported:
SegmentNodeStore
- use a path to the repository
directory,SegmentNodeStore
(Oak < 1.6) - use the segment-old:
prefix and the path to the repository
directory,DocumentNodeStore
with MongoDB - mongodb://host:port/database
,DocumentNodeStore
with a RDB - jdbc:...
. It requires passing user and password with separate parameters.Following parameters should be used for the JDBC node store:
--src-password=... --src-user=...
--user=... --password=...
Examples:
java -jar oak-upgrade-*.jar \ path/to/the/repository \ mongodb://localhost:27017/oak java -jar oak-upgrade-*.jar \ --user=sa --password=sa \ mongodb://localhost:27017/oak \ jdbc:h2:path/to/repo
In order to upgrade Jackrabbit 2 repository to the new node store, pass the path to the repository
directory as the source
parameter. Optionally, you may also pass the path to the repository.xml
file as a separate parameter. Examples:
java -jar oak-upgrade-*.jar \ path/to/the/jr2/repository \ path/to/repository.xml \ path/to/the/new/repository java -jar oak-upgrade-*.jar \ path/to/the/jr2/repository \ mongodb://localhost:27017/oak
By default, the oak-upgrade
only copies the binary references, so you need to reuse the same blob/data store in the new repository. However, it's also possible to migrate binaries as well using the --copy-binaries
parameter. Following migration paths are possible for the binaries. The internal means that the binaries are stored inside the segment or document node store:
From ↓ To → | Internal | FileBlobStore | FileDataStore | S3 |
---|---|---|---|---|
Internal | Yes² | Yes | Yes | Yes |
FileBlobStore | Yes | Yes² | Yes | Yes |
FileDataStore | Yes | Yes | Yes² | Yes (not recommended)¹ |
S3 | Yes | Yes | Yes | Yes² |
¹ The S3DataStore will take care of this migration automatically, no need to use oak-upgrade
² The storage might be simple cloned without using oak2oak
Following parameters can be used to define the source and the destination blob stores:
Blob store type | Source parameter | Destination |
---|---|---|
FileBlobStore | --src-fileblobstore=... | --fileblobstore=... |
FileDataStore | --src-datastore=... | --datastore=... |
S3 | --src-s3config=... --src-s3datastore=... | --s3config=... --s3datastore=... |
Use the --copy-binaries
parameter to instruct the oak-upgrade
to copy binaries.
Example:
java -jar oak-upgrade-*.jar \ --copy-binaries \ --src-datastore=/old/repository/datastore \ --fileblobstore=/new/repository/datastore \ /old/repository \ /new/repository
Using S3DataStore as a source or destination for binaries requires passing two arguments: s3datastore
and s3config
. The first one should point to the datastore directory (eg. crx-quickstart/repository/datastore
). The second should be used to define the org.apache.jackrabbit.oak.plugins.blob.datastore.S3DataStore.cfg
configuration file path. File should have following format:
accessKey=... secretKey=... s3Bucket=... s3Region=eu-west-1 s3EndPoint=s3-eu-west-1.amazonaws.com connectionTimeout=120000 socketTimeout=120000 maxConnections=40 writeThreads=30 maxErrorRetry=10
For the region and endpoints please visit the Amazon documentation.
Alternativly the *.config
file format, described on the Apache Sling website, can be used as it may be convenient for re-using existing OSGi configuration files.
It's possible to define a list of content subtrees to include or exclude during the migration. By default, the whole repository gets copied. In order to copy only a subtree, use the --include-paths
. For example, the following command will copy only the /content/site
and /content/other_site
subtrees:
java -jar oak-upgrade-*.jar \ --include-paths=/content/site,/content/other_site \ /old/repository \ /new/repository
You may also exclude specific paths from being copied. Following command will copy the whole content without the /content/redundant_site
:
java -jar oak-upgrade-*.jar \ --exclude-paths=/content/redundant_site \ /old/repository \ /new/repository
By default, the source repository replaces the destination repository (if there‘s one). For instance, in the first example if the /content/site
node already exists in the destination repository, it’ll be removed and replaced by the source node. It's also possible to merge content from the source repository with --merge-paths
:
java -jar oak-upgrade-*.jar \ --include-paths=/content/site \ --merge-paths=/content/site \ /old/repository \ /new/repository
Please notice that in the last example it's necessary to narrow the migration scope using --include-paths
parameter.
By default, the whole version storage is migrated. This includes referenced version histories (their versionable node still exists in the repository) and orphaned ones (their versionable node no longer exists). oak-upgrade
allows to skip the orphaned version histories to make the migration faster and the destination repository smaller. It's also possible to define a maximum age for the version histories (both referenced and orphaned) to be copied.
There are two parameters: --copy-orphaned-versions
and --copy-versions
. Both accepts boolean values or a YYYY-MM-DD
date. Examples:
# only copy referenced versions java -jar oak-upgrade-*.jar \ --copy-orphaned-versions=false \ /old/repository /new/repository # don't copy any versions at all java -jar oak-upgrade-*.jar \ --copy-versions=false \ /old/repository /new/repository # copy referenced versions created after 2010 # and orphaned version created after 2011 java -jar oak-upgrade-*.jar \ --copy-versions=2010-01-01 \ --copy-orphaned-versions=2011-01-01 \ /old/repository /new/repository
If an existing repository is passed as the destination, then only a diff between source and destination will be migrated. It allows to migrate the content in a few iterations. For instance, following case is possible:
The migration might be stop at any time using ^C
. Resume the migration running the same command which was used to start it.
It's possible to inject custom logic into the upgrade process, by implementing RepositoryInitializer
or CommitHook
.
In order to do that, create a new Maven project, with appropriate implementation. Then create following file:
src/main/resources/META-INF/services/org.apache.jackrabbit.oak.spi.commit.CommitHook
The file should contain just one line - the name of the class with the CoomitHook
implementation. Build the project and attach the JAR to the oak-upgrade class path:
java -cp my-commit-hook.jar:oak-upgrade-*.jar org.apache.jackrabbit.oak.upgrade.cli.OakUpgrade [normal oak-upgrade parameters]
A custom RepositoryInitializer
can be injected in a similar way.
The full list of supported parameters can be displayed using --help
switch.
When migrating an old SegmentMK repository (pre-Oak 1.6) to the new SegmentMK (Oak >= 1.6), the checkpoints are migrated as well. This allows to avoid reindexing when the Oak is being run for the first time on the new repository. However, the checkpoints won't be migrated in following cases:
In the second case oak-upgrade emits following warning and breaks:
Checkpoints won't be copied, because no external datastore has been specified. This will result in the full repository reindexing on the first start. Use --skip-checkpoints to force the migration or see https://jackrabbit.apache.org/oak/docs/migration.html#Checkpoints_migration for more info.
The easiest way to fix this issue is specifying the source datastore in the command line options (eg. --src-datastore
or --src-s3datastore
).
The warning may also be ignored, but in this case the repository will be fully reindexed on the first startup. It may be a long process, especially for the big instance. Repository won't be usable until the reindexing process is done. Use --skip-checkpoints
option to suppress the warning.
Oak offers one more way to migrate blob store, without turning off the instance (a few restarts might be required, but the migration process is done during normal repository operation).
There is a SplitBlobStore
implementation, that takes two blob stores: the old (already existing) and the new (empty) one. After configuring Oak to use it, all write requests are proxied to the new repository. The read requests uses the old or the new repository, depending on the blob id (SplitBlobStore
saves all the new blob ids).
Besides from the new blob store implementation, there is a process (controlled by JMX) which migrates binaries between stores. When all binaries are migrated, the SplitBlobStore
can be disabled as well as the old store.
These steps should be followed for migration from FileBlobStore
, FileDataStore
or S3DataStore
.
Add split.blobstore=old
OSGi property to the source blob store.
Configure the destination blob store and add split.blobstore=new
property to its OSGi configuration.
Create a configuration for the org.apache.jackrabbit.oak.spi.blob.osgi.SplitBlobStoreService
.
split.old.blobstore.type=INTERNAL # optional: repository.home=crx-quickstart/repository
migrated_blobs.txt
file.Restart the instance
These steps should be followed for migration from MongoBlobStore
or for blobs embedded in the SegmentNodeStore
.
Configure the destination blob store and add split.blobstore=new
property to its OSGi configuration.
Create a configuration for the org.apache.jackrabbit.oak.spi.blob.osgi.SplitBlobStoreService
.
# use DOCUMENT or SEGMENT, depending on the NodeStore type: split.old.blobstore.type=SEGMENT # optional: repository.home=crx-quickstart/repository
Restart the instance
After starting the instance, the SplitBlobStoreService
will wait until blob stores with split.blobstore
properties (the old
and the new
) are available. They will be bound and the SplitBlobStore
will be registered in the OSGi. On the other hand, the NodeStoreService
will ignore blob stores configured with the split.blobstore
property and will wait until the SplitBlobStore
is available.
From this point, all the new blobs will be saved in the new blob store. Binaries from the old blob store will be available to read.
The split.blobstore
property support was added to FileBlobStore
, AbstractDataStoreService
(handling all Jackrabbit data stores), DocumentNodeStoreService
and SegmentNodeStoreService
.
BlobMigration
JMX bean in the Felix console.startBlobMigration(false)
operationThe migration can be stopped using stopBlobMigration()
and then resumed with startBlobMigration(true)
. The current stats are available via the JMX as well:
When the migration is finished, it's possible to completely switch to the new blob store:
SplitBlobStoreService
split.blobstore=new
OSGi property from the new blob store, so it can be find by the NodeStoreService
.Migration is now complete!