<!--

    Licensed to the Apache Software Foundation (ASF) under one
    or more contributor license agreements.  See the NOTICE file
    distributed with this work for additional information
    regarding copyright ownership.  The ASF licenses this file
    to you under the Apache License, Version 2.0 (the
    "License"); you may not use this file except in compliance
    with the License.  You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing,
    software distributed under the License is distributed on an
    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
    KIND, either express or implied.  See the License for the
    specific language governing permissions and limitations
    under the License.

-->

# Docker image version definition

Before v0.12, Apache IoTDB's docker image name and version format is:
`apache/iotdb:0.<major>.<minor>`.

From 0.12 on, we release two images: one is for a single node, and the other is for the cluster mode.
The format is: `apache/iotdb:0.<major>.<minor>-node` and `apache/iotdb:0.<major>.<minor>-cluster`.

From 1.0.0, we split 3 kinds of images: datanode, confignode and all of them in one image called 1C1D. 
The format is: `apache/iotdb:<version>-confignode`,`apache/iotdb:<version>-datanode` and `apache/iotdb:<version>-standalone`.

From 2.0.5, we maintain 4 images: datanode, confignode, standalone and ainode. The format is: `apache/iotdb:<version>-datanode`, `apache/iotdb:<version>-confignode`, `apache/iotdb:<version>-ainode` and `apache/iotdb:<version>-standalone`

## The definition of tag "latest"
Before v0.12, the "latest" tag will forward to the largest `apache/iotdb:0.<major>.<minor>`.

From 0.12 on, the "latest" tag will forward to the largest `apache/iotdb:0.<major>.<minor>-node`.


# How to build

docker build -t THE_DOCKER_IMAGE_NAME:THE_VERSION -f THE_DOCKER_FILE_NAME

e.g.,

```shell
docker build -t my-iotdb:<version> -f Dockerfile-<version>
# for 1.0.0
cd src/main/DockerCompose
./do-docker-build.sh -t <target> -v <version>
e.g.
./do-docker-build.sh -t standalone -v 1.0.0
# for ainode, start from 2.0.5
./do-docker-build.sh -t ainode -v 2.0.5-SNAPSHOT
# for ainode, start from 2.0.8
cd src/main
./build-ainode.sh -v 2.0.8-SNAPSHOT -d /data/ainode
```
Notice:
Make directory of src/main/target and put the zip file downloading from the official download page. 
e.g.
```shell
$ ls -hl target/
total 215M
-rw-r--r-- 1 root root 75M Nov 30 20:04 apache-iotdb-1.0.0-all-bin.zip
-rw-r--r-- 1 root root 69M Dec  1 17:12 apache-iotdb-1.0.0-confignode-bin.zip
-rw-r--r-- 1 root root 73M Dec  1 17:13 apache-iotdb-1.0.0-datanode-bin.zip
-rw-r--r-- 1 root root 329K  7 15 17:12 apache-iotdb-2.0.5-SNAPSHOT-ainode-bin.zip
```

To avoid mannually copy these files, you can run our `do-docker-build.sh` with argument `-b`.

# How to run IoTDB server 

Actually, we maintain a repo on dockerhub, so that you can get the docker image directly.

For example,

```shell
docker run -d --name iotdb -p 6667:6667 -p 31999:31999 -p 8181:8181 -p 5555:5555 apache/iotdb:<version>
```

```shell
docker run -d --name iotdb -p 6667:6667 -p 31999:31999 -p 8181:8181 -p 5555:5555 -p 9003:9003 -p 40010:40010 apache/iotdb:<version>
```
Since 1.0.0, see [offical documents.](https://iotdb.apache.org/UserGuide/latest/QuickStart/QuickStart.html)

# How to register AINode to IoTDB cluster

## Register AINode to the existing IoTDB cluster
Please download `docker-compose-ainode.yml` in `docker/src/main/DockerCompose` first. After replace the correct IoTDB cluster configurations, run
```shell
docker compose -f docker-compose-ainode.yml up -d
```

Start from v2.0.7, run
```shell
docker run -d \
  --name iotdb-ainode \
  --network host \
  -p 10810:10810 \
  -p 8080:8080 \
  -e AIN_SEED_CONFIG_NODE=127.0.0.1:10710 \
  -e AIN_RPC_ADDRESS=127.0.0.1 \
  -e AIN_RPC_PORT=10810 \
  -e AIN_CLUSTER_INGRESS_ADDRESS=127.0.0.1 \
  -e AIN_CLUSTER_INGRESS_PORT=6667 \
  -e AIN_CLUSTER_INGRESS_USERNAME=root \
  -e AIN_CLUSTER_INGRESS_PASSWORD=root \
  apache/iotdb:2.0.11-SNAPSHOT-ainode
```

## Quick start
We provide `docker-compose-cluster-1c1d1a.yml` in `docker/src/main/DockerCompose`. Downloading this yaml file, both standalone and ainode docker first. Subsequently, you can easily obtain a IoTDB cluster, which consists of a ConfigNode, a DataNode and a AINode, in your local machine.

## Port description

By default, the ports that IoTDB uses are:

* 6667: RPC port
* 31999: JMX port
* 8086: InfluxDB Protocol port
* 8181: Monitor port
* 5555: Data sync port
* 9003: internal metadata rpc port (for cluster)
* 40010: internal data rpc port (for cluster)
* 10810: internal rpc port (for ainode)


## How to configure docker volumes

The instructions below show how to store the output data and logs of IoTDB to two folders called 
iotdb_data and iotdb_logs respectively. 

`/D/docker/iotdb_data` and `/D/docker/iotdb_logs` can be changed to any local directory of your own host.

```shell
docker run -it -v /D/docker/iotdb_data:/iotdb/data -v /D/docker/iotdb_logs:/iotdb/logs --name 123 apache/iotdb:<version>
```

Similarly, you can customize the directories of the ainode through the following commands.

```shell
docker run -it -v /D/docker/ainode_data:/ainode/data -v /D/docker/ainode_logs:/ainode/logs --name 123 apache/iotdb:<version>
```

# How to run IoTDB client

Suppose you have run an IoTDB Server in docker

1. Use `docker ps` to find out the CONTAINER ID
e.g.,
   
```shell
$ docker ps
CONTAINER ID        IMAGE               COMMAND                  CREATED             STATUS              PORTS                                                                                NAMES
c82321c70137        apache/iotdb:<version>  "/iotdb/sbin/start-s…"   12 minutes ago      Up 12 minutes       0.0.0.0:6667->6667/tcp, 0.0.0.0:8181->8181/tcp, 5555/tcp, 0.0.0.0:31999->31999/tcp   iotdb
```
2. Use `docker exec` to attach the container:

```shell
docker exec -it iotdb /bin/bash
```

Then, for the latest version (or, >=0.10.x), run `start-cli.sh`, for version 0.9.x and 0.8.1, run `start-client.sh`.

Or, 

```shell
docker exec -it iotdb start-cli.sh
```

Enjoy it!