show version
+---------------+ | version| +---------------+ |0.14.0-SNAPSHOT| +---------------+ Total line number = 1 It costs 0.417s
SET STORAGE GROUP TO <FullPath> Eg: IoTDB > SET STORAGE GROUP TO root.ln.wf01.wt01 Note: FullPath can not include wildcard `*` or `**`
DELETE STORAGE GROUP <PathPattern> [COMMA <PathPattern>]* Eg: IoTDB > DELETE STORAGE GROUP root.ln Eg: IoTDB > DELETE STORAGE GROUP root.* Eg: IoTDB > DELETE STORAGE GROUP root.**
CREATE TIMESERIES <FullPath> WITH <AttributeClauses> alias : LR_BRACKET ID RR_BRACKET ; attributeClauses : DATATYPE OPERATOR_EQ <DataTypeValue> COMMA ENCODING OPERATOR_EQ <EncodingValue> (COMMA (COMPRESSOR | COMPRESSION) OPERATOR_EQ <CompressorValue>)? (COMMA property)* tagClause attributeClause ; attributeClause : ATTRIBUTES LR_BRACKET propertyClause (COMMA propertyClause)* RR_BRACKET ; tagClause : TAGS LR_BRACKET propertyClause (COMMA propertyClause)* RR_BRACKET ; propertyClause : name=ID OPERATOR_EQ propertyValue ; DataTypeValue: BOOLEAN | DOUBLE | FLOAT | INT32 | INT64 | TEXT EncodingValue: GORILLA | PLAIN | RLE | TS_2DIFF | REGULAR CompressorValue: UNCOMPRESSED | SNAPPY AttributesType: SDT | COMPDEV | COMPMINTIME | COMPMAXTIME PropertyValue: ID | constant Eg: CREATE TIMESERIES root.ln.wf01.wt01.status WITH DATATYPE=BOOLEAN, ENCODING=PLAIN Eg: CREATE TIMESERIES root.ln.wf01.wt01.temperature WITH DATATYPE=FLOAT, ENCODING=RLE Eg: CREATE TIMESERIES root.ln.wf01.wt01.temperature WITH DATATYPE=FLOAT, ENCODING=RLE, COMPRESSOR=SNAPPY, MAX_POINT_NUMBER=3 Eg: CREATE TIMESERIES root.turbine.d0.s0(temperature) WITH DATATYPE=FLOAT, ENCODING=RLE, COMPRESSOR=SNAPPY tags(unit=f, description='turbine this is a test1') attributes(H_Alarm=100, M_Alarm=50) Eg: CREATE TIMESERIES root.ln.wf01.wt01.temperature WITH DATATYPE=FLOAT, ENCODING=RLE, LOSS=SDT, COMPDEV=0.01 Eg: CREATE TIMESERIES root.ln.wf01.wt01.temperature WITH DATATYPE=FLOAT, ENCODING=RLE, LOSS=SDT, COMPDEV=0.01, COMPMINTIME=3 Eg: CREATE TIMESERIES root.ln.wf01.wt01.temperature WITH DATATYPE=FLOAT, ENCODING=RLE, LOSS=SDT, COMPDEV=0.01, COMPMINTIME=2, COMPMAXTIME=15 Note: Datatype and encoding type must be corresponding. Please check Chapter 3 Encoding Section for details. Note: When propertyValue is SDT, it is required to set compression deviation COMPDEV, which is the maximum absolute difference between values. Note: For SDT, values withtin COMPDEV will be discarded. Note: For SDT, it is optional to set compression minimum COMPMINTIME, which is the minimum time difference between stored values for purpose of noise reduction. Note: For SDT, it is optional to set compression maximum COMPMAXTIME, which is the maximum time difference between stored values regardless of COMPDEV.
CREATE TIMESERIES <FullPath> <SimplifiedAttributeClauses> SimplifiedAttributeClauses : WITH? (DATATYPE OPERATOR_EQ)? <DataTypeValue> ENCODING OPERATOR_EQ <EncodingValue> ((COMPRESSOR | COMPRESSION) OPERATOR_EQ <CompressorValue>)? (COMMA property)* tagClause attributeClause ; Eg: CREATE TIMESERIES root.ln.wf01.wt01.status BOOLEAN ENCODING=PLAIN Eg: CREATE TIMESERIES root.ln.wf01.wt01.temperature FLOAT ENCODING=RLE Eg: CREATE TIMESERIES root.ln.wf01.wt01.temperature FLOAT ENCODING=RLE COMPRESSOR=SNAPPY MAX_POINT_NUMBER=3 Eg: CREATE TIMESERIES root.turbine.d0.s0(temperature) FLOAT ENCODING=RLE COMPRESSOR=SNAPPY tags(unit=f, description='turbine this is a test1') attributes(H_Alarm=100, M_Alarm=50) Eg: CREATE TIMESERIES root.ln.wf01.wt01.temperature FLOAT ENCODING=RLE LOSS=SDT COMPDEV=0.01 Eg: CREATE TIMESERIES root.ln.wf01.wt01.temperature FLOAT ENCODING=RLE LOSS=SDT COMPDEV=0.01 COMPMINTIME=3 Eg: CREATE TIMESERIES root.ln.wf01.wt01.temperature FLOAT ENCODING=RLE LOSS=SDT COMPDEV=0.01 COMPMINTIME=2 COMPMAXTIME=15
CREATE ALIGNED TIMESERIES <FullPath> alignedMeasurements alignedMeasurements : LR_BRACKET nodeNameWithoutWildcard attributeClauses (COMMA nodeNameWithoutWildcard attributeClauses)+ RR_BRACKET ; Eg: CREATE ALIGNED TIMESERIES root.ln.wf01.GPS(lat FLOAT ENCODING=GORILLA, lon FLOAT ENCODING=GORILLA COMPRESSOR=SNAPPY) Note: It is not supported to set different compression for a group of aligned timeseries. Note: It is not currently supported to set an alias, tag, and attribute for aligned timeseries.
CREATE SCHEMA TEMPLATE <TemplateName> LR_BRACKET <TemplateMeasurementClause> (COMMA plateMeasurementClause>)* RR_BRACKET templateMeasurementClause : suffixPath attributeClauses #nonAlignedTemplateMeasurement | suffixPath LR_BRACKET nodeNameWithoutWildcard attributeClauses (COMMA nodeNameWithoutWildcard attributeClauses)+ RR_BRACKET #alignedTemplateMeasurement ; Eg: CREATE SCHEMA TEMPLATE temp1( s1 INT32 encoding=Gorilla, compression=SNAPPY, vector1( s1 INT32 encoding=Gorilla, s2 FLOAT encoding=RLE, compression=SNAPPY) )
SET SCHEMA TEMPLATE <TemplateName> TO <PrefixPath> Eg: SET SCHEMA TEMPLATE temp1 TO root.beijing
CREATE TIMESERIES OF SCHEMA TEMPLATE ON <PrefixPath> Eg: CREATE TIMESERIES OF SCHEMA TEMPLATE ON root.beijing
UNSET SCHEMA TEMPLATE <TemplateName> FROM <PrefixPath> Eg: UNSET SCHEMA TEMPLATE temp1 FROM root.beijing
DELETE TIMESERIES <PathPattern> [COMMA <PathPattern>]* Eg: IoTDB > DELETE TIMESERIES root.ln.wf01.wt01.status Eg: IoTDB > DELETE TIMESERIES root.ln.wf01.wt01.status, root.ln.wf01.wt01.temperature Eg: IoTDB > DELETE TIMESERIES root.ln.wf01.wt01.*
ALTER TIMESERIES fullPath alterClause alterClause : RENAME beforeName=ID TO currentName=ID | SET property (COMMA property)* | DROP ID (COMMA ID)* | ADD TAGS property (COMMA property)* | ADD ATTRIBUTES property (COMMA property)* | UPSERT tagClause attributeClause ; attributeClause : (ATTRIBUTES LR_BRACKET property (COMMA property)* RR_BRACKET)? ; tagClause : (TAGS LR_BRACKET property (COMMA property)* RR_BRACKET)? ; Eg: ALTER timeseries root.turbine.d1.s1 RENAME tag1 TO newTag1 Eg: ALTER timeseries root.turbine.d1.s1 SET tag1=newV1, attr1=newV1 Eg: ALTER timeseries root.turbine.d1.s1 DROP tag1, tag2 Eg: ALTER timeseries root.turbine.d1.s1 ADD TAGS tag3=v3, tag4=v4 Eg: ALTER timeseries root.turbine.d1.s1 ADD ATTRIBUTES attr3=v3, attr4=v4 EG: ALTER timeseries root.turbine.d1.s1 UPSERT TAGS(tag2=newV2, tag3=v3) ATTRIBUTES(attr3=v3, attr4=v4)
SHOW TIMESERIES Eg: IoTDB > SHOW TIMESERIES Note: This statement can only be used in IoTDB Client. If you need to show all timeseries in JDBC, please use `DataBaseMetadata` interface.
SHOW TIMESERIES <Path> Eg: IoTDB > SHOW TIMESERIES root.** Eg: IoTDB > SHOW TIMESERIES root.ln.** Eg: IoTDB > SHOW TIMESERIES root.ln.*.*.status Eg: IoTDB > SHOW TIMESERIES root.ln.wf01.wt01.status Note: The path can be timeseries path or path pattern Note: This statement can be used in IoTDB Client and JDBC.
SHOW TIMESERIES pathPattern? showWhereClause? showWhereClause : WHERE (property | containsExpression) ; containsExpression : name=ID OPERATOR_CONTAINS value=propertyValue ; Eg: show timeseries root.ln.** where unit='c' Eg: show timeseries root.ln.** where description contains 'test1'
SHOW TIMESERIES pathPattern? showWhereClause? limitClause? showWhereClause : WHERE (property | containsExpression) ; containsExpression : name=ID OPERATOR_CONTAINS value=propertyValue ; limitClause : LIMIT INT offsetClause? | offsetClause? LIMIT INT ; Eg: show timeseries root.ln.** where unit='c' Eg: show timeseries root.ln.** where description contains 'test1' Eg: show timeseries root.ln.** where unit='c' limit 10 offset 10
SHOW STORAGE GROUP Eg: IoTDB > SHOW STORAGE GROUP Note: This statement can be used in IoTDB Client and JDBC.
SHOW STORAGE GROUP <PathPattern> Eg: IoTDB > SHOW STORAGE GROUP root.* Eg: IoTDB > SHOW STORAGE GROUP root.** Eg: IoTDB > SHOW STORAGE GROUP root.ln Note: This statement can be used in IoTDB Client and JDBC.
SHOW MERGE INFO Eg: IoTDB > SHOW MERGE INFO Note: This statement can be used in IoTDB Client and JDBC.
COUNT TIMESERIES <Path> Eg: IoTDB > COUNT TIMESERIES root.** Eg: IoTDB > COUNT TIMESERIES root.ln.** Eg: IoTDB > COUNT TIMESERIES root.ln.*.*.status Eg: IoTDB > COUNT TIMESERIES root.ln.wf01.wt01.status Note: The path can be timeseries path or path pattern. Note: This statement can be used in IoTDB Client and JDBC.
COUNT TIMESERIES <Path> GROUP BY LEVEL=<INTEGER> Eg: IoTDB > COUNT TIMESERIES root.** GROUP BY LEVEL=1 Eg: IoTDB > COUNT TIMESERIES root.ln.** GROUP BY LEVEL=2 Eg: IoTDB > COUNT TIMESERIES root.ln.wf01.* GROUP BY LEVEL=3 Note: The path can be timeseries path or path pattern. Note: This statement can be used in IoTDB Client and JDBC.
COUNT NODES <Path> LEVEL=<INTEGER> Eg: IoTDB > COUNT NODES root.** LEVEL=2 Eg: IoTDB > COUNT NODES root.ln.** LEVEL=2 Eg: IoTDB > COUNT NODES root.ln.*.* LEVEL=3 Eg: IoTDB > COUNT NODES root.ln.wf01.* LEVEL=3 Note: The path can be timeseries path or path pattern. Note: This statement can be used in IoTDB Client and JDBC.
SHOW DEVICES (WITH STORAGE GROUP)? limitClause? Eg: IoTDB > SHOW DEVICES Eg: IoTDB > SHOW DEVICES WITH STORAGE GROUP Note: This statement can be used in IoTDB Client and JDBC.
SHOW DEVICES <PathPattern> (WITH STORAGE GROUP)? limitClause? Eg: IoTDB > SHOW DEVICES root.** Eg: IoTDB > SHOW DEVICES root.ln.* Eg: IoTDB > SHOW DEVICES root.*.wf01 Eg: IoTDB > SHOW DEVICES root.ln.* WITH STORAGE GROUP Eg: IoTDB > SHOW DEVICES root.*.wf01 WITH STORAGE GROUP Note: The path can be path pattern. Note: This statement can be used in IoTDB Client and JDBC.
SHOW CHILD PATHS Eg: IoTDB > SHOW CHILD PATHS Note: This statement can be used in IoTDB Client and JDBC.
SHOW CHILD PATHS <PathPattern> Eg: IoTDB > SHOW CHILD PATHS root Eg: IoTDB > SHOW CHILD PATHS root.ln Eg: IoTDB > SHOW CHILD PATHS root.*.wf01 Eg: IoTDB > SHOW CHILD PATHS root.ln.wf* Note: This statement can be used in IoTDB Client and JDBC.
INSERT INTO <PrefixPath> LPAREN TIMESTAMP COMMA <Sensor> [COMMA <Sensor>]* RPAREN VALUES LPAREN <TimeValue>, <PointValue> [COMMA <PointValue>]* RPAREN Sensor : Identifier Eg: IoTDB > INSERT INTO root.ln.wf01.wt01(timestamp,status) values(1509465600000,true) Eg: IoTDB > INSERT INTO root.ln.wf01.wt01(timestamp,status) VALUES(NOW(), false) Eg: IoTDB > INSERT INTO root.ln.wf01.wt01(timestamp,temperature) VALUES(2017-11-01T00:17:00.000+08:00,24.22028) Eg: IoTDB > INSERT INTO root.ln.wf01.wt01(timestamp,status,temperature) VALUES (1509466680000,false,20.060787) Eg: IoTDB > INSERT INTO root.sg.d1(timestamp,(s1,s2),(s3,s4)) VALUES (1509466680000,(1.0,2),(NULL,4)) Note: the statement needs to satisfy this constraint: <PrefixPath> + <Path> = <Timeseries> Note: The order of Sensor and PointValue need one-to-one correspondence
DELETE FROM <PathPattern> [COMMA <PathPattern>]* [WHERE <WhereClause>]? WhereClause : <Condition> [(AND) <Condition>]* Condition : <TimeExpr> [(AND) <TimeExpr>]* TimeExpr : TIME PrecedenceEqualOperator (<TimeValue> | <RelativeTime>) Eg: DELETE FROM root.ln.wf01.wt01.temperature WHERE time > 2016-01-05T00:15:00+08:00 and time < 2017-11-1T00:05:00+08:00 Eg: DELETE FROM root.ln.wf01.wt01.status, root.ln.wf01.wt01.temperature WHERE time < NOW() Eg: DELETE FROM root.ln.wf01.wt01.* WHERE time >= 1509466140000
SELECT <SelectClause> FROM <FromClause> [WHERE <WhereClause>]? SelectClause : <SelectPath> (COMMA <SelectPath>)* SelectPath : <FUNCTION> LPAREN <Path> RPAREN | <Path> FUNCTION : ‘COUNT’ , ‘MIN_TIME’, ‘MAX_TIME’, ‘MIN_VALUE’, ‘MAX_VALUE’ FromClause : <PrefixPath> (COMMA <PrefixPath>)? WhereClause : <Condition> [(AND | OR) <Condition>]* Condition : <Expression> [(AND | OR) <Expression>]* Expression : [NOT | !]? <TimeExpr> | [NOT | !]? <SensorExpr> TimeExpr : TIME PrecedenceEqualOperator (<TimeValue> | <RelativeTime>) RelativeTimeDurationUnit = Integer ('Y'|'MO'|'W'|'D'|'H'|'M'|'S'|'MS'|'US'|'NS') RelativeTime : (now() | <TimeValue>) [(+|-) RelativeTimeDurationUnit]+ SensorExpr : (<Timeseries> | <Path>) PrecedenceEqualOperator <PointValue> Eg: IoTDB > SELECT status, temperature FROM root.ln.wf01.wt01 WHERE temperature < 24 and time > 2017-11-01 00:13:00 Eg. IoTDB > SELECT ** FROM root Eg. IoTDB > SELECT * FROM root.** Eg. IoTDB > SELECT * FROM root.** where time > now() - 5m Eg. IoTDB > SELECT * FROM root.ln.*.wf* Eg. IoTDB > SELECT COUNT(temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 25 Eg. IoTDB > SELECT MIN_TIME(temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 25 Eg. IoTDB > SELECT MAX_TIME(temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature > 24 Eg. IoTDB > SELECT MIN_VALUE(temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature > 23 Eg. IoTDB > SELECT MAX_VALUE(temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 25 Eg. IoTDB > SELECT COUNT(temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 25 GROUP BY LEVEL=1 Note: the statement needs to satisfy this constraint: <Path>(SelectClause) + <PrefixPath>(FromClause) = <Timeseries> Note: If the <SensorExpr>(WhereClause) is started with <Path> and not with ROOT, the statement needs to satisfy this constraint: <PrefixPath>(FromClause) + <Path>(SensorExpr) = <Timeseries> Note: In Version 0.7.0, if <WhereClause> includes `OR`, time filter can not be used. Note: There must be a space on both sides of the plus and minus operator appearing in the time expression
SELECT <SelectClause> FROM <FromClause> WHERE <WhereClause> GROUP BY <GroupByTimeClause> SelectClause : <Function> [COMMA < Function >]* Function : <AggregationFunction> LPAREN <Path> RPAREN FromClause : <PrefixPath> WhereClause : <Condition> [(AND | OR) <Condition>]* Condition : <Expression> [(AND | OR) <Expression>]* Expression : [NOT | !]? <TimeExpr> | [NOT | !]? <SensorExpr> TimeExpr : TIME PrecedenceEqualOperator (<TimeValue> | <RelativeTime>) RelativeTimeDurationUnit = Integer ('Y'|'MO'|'W'|'D'|'H'|'M'|'S'|'MS'|'US'|'NS') RelativeTime : (now() | <TimeValue>) [(+|-) RelativeTimeDurationUnit]+ SensorExpr : (<Timeseries> | <Path>) PrecedenceEqualOperator <PointValue> GroupByTimeClause : LPAREN <TimeInterval> COMMA <TimeUnit> (COMMA <TimeUnit>)? RPAREN TimeInterval: LSBRACKET <TimeValue> COMMA <TimeValue> RRBRACKET | LRBRACKET <TimeValue> COMMA <TimeValue> RSBRACKET TimeUnit : Integer <DurationUnit> DurationUnit : "ms" | "s" | "m" | "h" | "d" | "w" | "mo" Eg: SELECT COUNT(status), COUNT(temperature) FROM root.ln.wf01.wt01 where temperature < 24 GROUP BY([1509465720000, 1509466380000), 5m) Eg: SELECT COUNT(status), COUNT(temperature) FROM root.ln.wf01.wt01 where temperature < 24 GROUP BY((1509465720000, 1509466380000], 5m) Eg. SELECT COUNT (status), MAX_VALUE(temperature) FROM root.ln.wf01.wt01 WHERE time < 1509466500000 GROUP BY([1509465720000, 1509466380000), 5m, 10m) Eg. SELECT MIN_TIME(status), MIN_VALUE(temperature) FROM root.ln.wf01.wt01 WHERE temperature < 25 GROUP BY ([1509466140000, 1509466380000), 3m, 5ms) Eg. SELECT MIN_TIME(status), MIN_VALUE(temperature) FROM root.ln.wf01.wt01 WHERE temperature < 25 GROUP BY ((1509466140000, 1509466380000], 3m, 5ms) Eg. SELECT MIN_TIME(status), MIN_VALUE(temperature) FROM root.ln.wf01.wt01 WHERE temperature < 25 GROUP BY ((1509466140000, 1509466380000], 1mo) Eg. SELECT MIN_TIME(status), MIN_VALUE(temperature) FROM root.ln.wf01.wt01 WHERE temperature < 25 GROUP BY ((1509466140000, 1509466380000], 1mo, 1mo) Eg. SELECT MIN_TIME(status), MIN_VALUE(temperature) FROM root.ln.wf01.wt01 WHERE temperature < 25 GROUP BY ((1509466140000, 1509466380000], 1mo, 2mo) Note: the statement needs to satisfy this constraint: <Path>(SelectClause) + <PrefixPath>(FromClause) = <Timeseries> Note: If the <SensorExpr>(WhereClause) is started with <Path> and not with ROOT, the statement needs to satisfy this constraint: <PrefixPath>(FromClause) + <Path>(SensorExpr) = <Timeseries> Note: <TimeValue>(TimeInterval) needs to be greater than 0 Note: First <TimeValue>(TimeInterval) in needs to be smaller than second <TimeValue>(TimeInterval) Note: <TimeUnit> needs to be greater than 0 Note: Third <TimeUnit> if set shouldn't be smaller than second <TimeUnit> Note: If the second <DurationUnit> is "mo", the third <DurationUnit> need to be in month Note: If the third <DurationUnit> is "mo", the second <DurationUnit> can be in any unit
SELECT <SelectClause> FROM <FromClause> WHERE <WhereClause> FILL <FillClause> SelectClause : <Path> [COMMA <Path>]* FromClause : < PrefixPath > [COMMA < PrefixPath >]* WhereClause : <WhereExpression> WhereExpression : TIME EQUAL <TimeValue> FillClause : LPAREN <TypeClause> [COMMA <TypeClause>]* RPAREN TypeClause : <Int32Clause> | <Int64Clause> | <FloatClause> | <DoubleClause> | <BoolClause> | <TextClause> Int32Clause: INT32 LBRACKET (<LinearClause> | <PreviousClause>) RBRACKET Int64Clause: INT64 LBRACKET (<LinearClause> | <PreviousClause>) RBRACKET FloatClause: FLOAT LBRACKET (<LinearClause> | <PreviousClause>) RBRACKET DoubleClause: DOUBLE LBRACKET (<LinearClause> | <PreviousClause>) RBRACKET BoolClause: BOOLEAN LBRACKET (<LinearClause> | <PreviousClause>) RBRACKET TextClause: TEXT LBRACKET (<LinearClause> | <PreviousClause>) RBRACKET PreviousClause : PREVIOUS [COMMA <ValidPreviousTime>]? LinearClause : LINEAR [COMMA <ValidPreviousTime> COMMA <ValidBehindTime>]? ValidPreviousTime, ValidBehindTime: <TimeUnit> TimeUnit : Integer <DurationUnit> DurationUnit : "ms" | "s" | "m" | "h" | "d" | "w" Eg: SELECT temperature FROM root.ln.wf01.wt01 WHERE time = 2017-11-01T16:37:50.000 FILL(float[previous, 1m]) Eg: SELECT temperature,status FROM root.ln.wf01.wt01 WHERE time = 2017-11-01T16:37:50.000 FILL (float[linear, 1m, 1m], boolean[previous, 1m]) Eg: SELECT temperature,status,hardware FROM root.ln.wf01.wt01 WHERE time = 2017-11-01T16:37:50.000 FILL (float[linear, 1m, 1m], boolean[previous, 1m], text[previous]) Eg: SELECT temperature,status,hardware FROM root.ln.wf01.wt01 WHERE time = 2017-11-01T16:37:50.000 FILL (float[linear], boolean[previous, 1m], text[previous]) Note: the statement needs to satisfy this constraint: <PrefixPath>(FromClause) + <Path>(SelectClause) = <Timeseries> Note: Integer in <TimeUnit> needs to be greater than 0
# time 区间规则为:只能为左开右闭或左闭右开,例如:[20, 100) SELECT <SelectClause> FROM <FromClause> WHERE <WhereClause> GROUP BY <GroupByClause> (FILL <GROUPBYFillClause>)? GroupByClause : LPAREN <TimeInterval> COMMA <TimeUnit> RPAREN GROUPBYFillClause : LPAREN <TypeClause> RPAREN TypeClause : <AllClause> | <Int32Clause> | <Int64Clause> | <FloatClause> | <DoubleClause> | <BoolClause> | <TextClause> AllClause: ALL LBRACKET (<PreviousUntilLastClause> | <PreviousClause>) RBRACKET Int32Clause: INT32 LBRACKET (<PreviousUntilLastClause> | <PreviousClause>) RBRACKET Int64Clause: INT64 LBRACKET (<PreviousUntilLastClause> | <PreviousClause>) RBRACKET FloatClause: FLOAT LBRACKET (<PreviousUntilLastClause> | <PreviousClause>) RBRACKET DoubleClause: DOUBLE LBRACKET (<PreviousUntilLastClause> | <PreviousClause>) RBRACKET BoolClause: BOOLEAN LBRACKET (<PreviousUntilLastClause> | <PreviousClause>) RBRACKET TextClause: TEXT LBRACKET (<PreviousUntilLastClause> | <PreviousClause>) RBRACKET PreviousClause : PREVIOUS PreviousUntilLastClause : PREVIOUSUNTILLAST Eg: SELECT last_value(temperature) FROM root.ln.wf01.wt01 GROUP BY([20, 100), 5m) FILL (float[PREVIOUS]) Eg: SELECT last_value(temperature) FROM root.ln.wf01.wt01 GROUP BY((15, 100], 5m) FILL (float[PREVIOUS]) Eg: SELECT last_value(power) FROM root.ln.wf01.wt01 GROUP BY([20, 100), 5m) FILL (int32[PREVIOUSUNTILLAST]) Eg: SELECT last_value(power) FROM root.ln.wf01.wt01 GROUP BY([20, 100), 5m) FILL (int32[PREVIOUSUNTILLAST, 5m]) Eg: SELECT last_value(temperature), last_value(power) FROM root.ln.wf01.wt01 GROUP BY([20, 100), 5m) FILL (ALL[PREVIOUS]) Eg: SELECT last_value(temperature), last_value(power) FROM root.ln.wf01.wt01 GROUP BY([20, 100), 5m) FILL (ALL[PREVIOUS, 5m]) Note: In group by fill, sliding step is not supported in group by clause Note: Now, only last_value aggregation function is supported in group by fill. Note: Linear fill is not supported in group by fill.
SELECT <SelectClause> FROM <FromClause> WHERE <WhereClause> GROUP BY <GroupByClause> (FILL <GROUPBYFillClause>)? orderByTimeClause? orderByTimeClause: order by time (asc | desc)? Eg: SELECT last_value(temperature) FROM root.ln.wf01.wt01 GROUP BY([20, 100), 5m) FILL (float[PREVIOUS]) order by time desc Eg: SELECT * from root.** order by time desc Eg: SELECT * from root.** order by time desc align by device Eg: SELECT * from root.** order by time desc disable align Eg: SELECT last * from root order by time desc
SELECT <SelectClause> FROM <FromClause> [WHERE <WhereClause>] [<LIMITClause>] [<SLIMITClause>] SelectClause : [<Path> | Function]+ Function : <AggregationFunction> LPAREN <Path> RPAREN FromClause : <Path> WhereClause : <Condition> [(AND | OR) <Condition>]* Condition : <Expression> [(AND | OR) <Expression>]* Expression: [NOT|!]?<TimeExpr> | [NOT|!]?<SensorExpr> TimeExpr : TIME PrecedenceEqualOperator (<TimeValue> | <RelativeTime>) RelativeTimeDurationUnit = Integer ('Y'|'MO'|'W'|'D'|'H'|'M'|'S'|'MS'|'US'|'NS') RelativeTime : (now() | <TimeValue>) [(+|-) RelativeTimeDurationUnit]+ SensorExpr : (<Timeseries>|<Path>) PrecedenceEqualOperator <PointValue> LIMITClause : LIMIT <N> [OFFSETClause]? N : Integer OFFSETClause : OFFSET <OFFSETValue> OFFSETValue : Integer SLIMITClause : SLIMIT <SN> [SOFFSETClause]? SN : Integer SOFFSETClause : SOFFSET <SOFFSETValue> SOFFSETValue : Integer Eg: IoTDB > SELECT status, temperature FROM root.ln.wf01.wt01 WHERE temperature < 24 and time > 2017-11-01 00:13:00 LIMIT 3 OFFSET 2 Eg. IoTDB > SELECT COUNT (status), MAX_VALUE(temperature) FROM root.ln.wf01.wt01 WHERE time < 1509466500000 GROUP BY([1509465720000, 1509466380000), 5m) LIMIT 3 Note: N, OFFSETValue, SN and SOFFSETValue must be greater than 0. Note: The order of <LIMITClause> and <SLIMITClause> does not affect the grammatical correctness. Note: <FillClause> can not use <LIMITClause> but not <SLIMITClause>.
AlignbyDeviceClause : ALIGN BY DEVICE 规则: 1. 大小写不敏感。 正例:select * from root.sg1.** align by device 正例:select * from root.sg1.** ALIGN BY DEVICE 2. AlignbyDeviceClause 只能放在末尾。 正例:select * from root.sg1.** where time > 10 align by device 错例:select * from root.sg1.** align by device where time > 10 3. Select 子句中的 path 只能是单层,或者通配符,不允许有 path 分隔符"."。 正例:select s0,s1 from root.sg1.* align by device 正例:select s0,s1 from root.sg1.d0, root.sg1.d1 align by device 正例:select * from root.sg1.* align by device 正例:select * from root.** align by device 正例:select s0,s1,* from root.*.* align by device 错例:select d0.s1, d0.s2, d1.s0 from root.sg1 align by device 错例:select *.s0, *.s1 from root.* align by device 错例:select *.*.* from root align by device 4. 相同 measurement 的各设备的数据类型必须都相同, 正例:select s0 from root.sg1.d0,root.sg1.d1 align by device root.sg1.d0.s0 and root.sg1.d1.s0 are both INT32. 正例:select count(s0) from root.sg1.d0,root.sg1.d1 align by device count(root.sg1.d0.s0) and count(root.sg1.d1.s0) are both INT64. 错例:select s0 from root.sg1.d0, root.sg2.d3 align by device root.sg1.d0.s0 is INT32 while root.sg2.d3.s0 is FLOAT. 5. 结果集的展示规则:对于 select 中给出的列,不论是否有数据(是否被注册),均会被显示。此外,select 子句中还支持常数列(例如,'a', '123'等等)。 例如,"select s0,s1,s2,'abc',s1,s2 from root.sg.d0, root.sg.d1, root.sg.d2 align by device". 假设只有下述三列有数据: - root.sg.d0.s0 - root.sg.d0.s1 - root.sg.d1.s0 结果集形如: | Time | Device | s0 | s1 | s2 | 'abc' | s1 | s2 | | --- | --- | ---| ---| null | 'abc' | ---| null | | 1 |root.sg.d0| 20 | 2.5| null | 'abc' | 2.5| null | | 2 |root.sg.d0| 23 | 3.1| null | 'abc' | 3.1| null | | ... | ... | ...| ...| null | 'abc' | ...| null | | 1 |root.sg.d1| 12 |null| null | 'abc' |null| null | | 2 |root.sg.d1| 19 |null| null | 'abc' |null| null | | ... | ... | ...| ...| null | 'abc' | ...| null | 注意注意 设备'root.sg.d1'的's0'的值全为 null 6. 在 From 中重复写设备名字或者设备前缀是没有任何作用的。 例如,"select s0,s1 from root.sg.d0,root.sg.d0,root.sg.d1 align by device" 等于 "select s0,s1 from root.sg.d0,root.sg.d1 align by device". 例如。"select s0,s1 from root.sg.*,root.sg.d0 align by device" 等于 "select s0,s1 from root.sg.* align by device". 7. 在 Select 子句中重复写列名是生效的。例如,"select s0,s0,s1 from root.sg.* align by device" 不等于 "select s0,s1 from root.sg.* align by device". 8. 在 Where 子句中时间过滤条件和值过滤条件均可以使用,值过滤条件可以使用叶子节点 path,或以 root 开头的整个 path,不允许存在通配符。例如, - select * from root.sg.* where time = 1 align by device - select * from root.sg.* where s0 < 100 align by device - select * from root.sg.* where time < 20 AND s0 > 50 align by device - select * from root.sg.d0 where root.sg.d0.s0 = 15 align by device 9. 更多正例: - select * from root.vehicle.* align by device - select s0,s0,s1 from root.vehicle.* align by device - select s0,s1 from root.vehicle.* limit 10 offset 1 align by device - select * from root.vehicle.* slimit 10 soffset 2 align by device - select * from root.vehicle.* where time > 10 align by device - select * from root.vehicle.* where time < 10 AND s0 > 25 align by device - select * from root.vehicle.* where root.vehicle.d0.s0>0 align by device - select count(*) from root.vehicle.* align by device - select sum(*) from root.vehicle.* GROUP BY (20ms,0,[2,50]) align by device - select * from root.vehicle.* where time = 3 Fill(int32[previous, 5ms]) align by device
规则: 1. 大小写均可。 正例:select * from root.sg1.* disable align 正例:select * from root.sg1.* DISABLE ALIGN 2. Disable Align 只能用于查询语句句尾。 正例:select * from root.sg1.* where time > 10 disable align 错例:select * from root.sg1.* disable align where time > 10 3. Disable Align 不能用于聚合查询、Fill 语句、Group by 或 Group by device 语句,但可用于 Limit 语句。 正例:select * from root.sg1.* limit 3 offset 2 disable align 正例:select * from root.sg1.* slimit 3 soffset 2 disable align 错例:select count(s0),count(s1) from root.sg1.d1 disable align 错例:select * from root.vehicle.* where root.vehicle.d0.s0>0 disable align 错例:select * from root.vehicle.* align by device disable align 4. 结果显示若无数据显示为空白。 查询结果样式如下表: | Time | root.sg.d0.s1 | Time | root.sg.d0.s2 | Time | root.sg.d1.s1 | | --- | --- | --- | --- | --- | --- | | 1 | 100 | 20 | 300 | 400 | 600 | | 2 | 300 | 40 | 800 | 700 | 900 | | 4 | 500 | | | 800 | 1000 | | | | | | 900 | 8000 | 5. 一些正确使用样例: - select * from root.vehicle.* disable align - select s0,s0,s1 from root.vehicle.* disable align - select s0,s1 from root.vehicle.* limit 10 offset 1 disable align - select * from root.vehicle.* slimit 10 soffset 2 disable align - select * from root.vehicle.* where time > 10 disable align
Last 语句返回所要查询时间序列的最近时间戳的一条数据
SELECT LAST <SelectClause> FROM <FromClause> WHERE <WhereClause> Select Clause : <Path> [COMMA <Path>]* FromClause : < PrefixPath > [COMMA < PrefixPath >]* WhereClause : <TimeExpr> [(AND | OR) <TimeExpr>]* TimeExpr : TIME PrecedenceEqualOperator (<TimeValue> | <RelativeTime>) Eg. SELECT LAST s1 FROM root.sg.d1 Eg. SELECT LAST s1, s2 FROM root.sg.d1 Eg. SELECT LAST s1 FROM root.sg.d1, root.sg.d2 Eg. SELECT LAST s1 FROM root.sg.d1 where time > 100 Eg. SELECT LAST s1, s2 FROM root.sg.d1 where time >= 500 规则: 1. 需要满足 PrefixPath.Path 为一条完整的时间序列,即 <PrefixPath> + <Path> = <Timeseries> 2. 当前 SELECT LAST 语句只支持包含'>'或'>='的时间过滤条件 3. 结果集以四列的表格的固定形式返回。 例如 "select last s1, s2 from root.sg.d1, root.sg.d2", 结果集返回如下: | Time | timeseries | value | dataType | | --- | ------------- | ----- | -------- | | 5 | root.sg.d1.s1 | 100 | INT32 | | 2 | root.sg.d1.s2 | 400 | INT32 | | 4 | root.sg.d2.s1 | 250 | INT32 | | 9 | root.sg.d2.s2 | 600 | INT32 | 4. 注意 LAST 语句不支持与"disable align"关键词一起使用。
As 语句为 SELECT 语句中出现的时间序列规定一个别名
在每个查询中都可以使用 As 语句来规定时间序列的别名,但是对于通配符的使用有一定限制。 1. 原始数据查询: select s1 as speed, s2 as temperature from root.sg.d1 结果集将显示为: | Time | speed | temperature | | ... | ... | .... | 2. 聚合查询 select count(s1) as s1_num, max_value(s2) as s2_max from root.sg.d1 3. 降频聚合查询 select count(s1) as s1_num from root.sg.d1 group by ([100,500), 80ms) 4. 按设备对齐查询 select s1 as speed, s2 as temperature from root.sg.d1 align by device select count(s1) as s1_num, count(s2), count(s3) as s3_num from root.sg.d2 align by device 5. 最新数据查询 select last s1 as speed, s2 from root.sg.d1 规则: 1. 除按设备对齐查询外,每一个 AS 语句必须唯一对应一个时间序列。 E.g. select s1 as temperature from root.sg.* 此时如果存储组 root.sg.* 中含有多个设备,则会抛出异常。 2. 按设备对齐查询中,每个 AS 语句对应的前缀路径可以含多个设备,而后缀路径不能含多个传感器。 E.g. select s1 as temperature from root.sg.* 这种情况即使有多个设备,也可以正常显示。 E.g. select * as temperature from root.sg.d1 这种情况如果 * 匹配多个传感器,则无法正常显示。
Regexp语句仅支持数据类型为 TEXT的列进行过滤,传入的过滤条件为 Java 标准库风格的正则表达式
SELECT <SelectClause> FROM <FromClause> WHERE <WhereClause> Select Clause : <Path> [COMMA <Path>]* FromClause : < PrefixPath > [COMMA < PrefixPath >]* WhereClause : andExpression (OPERATOR_OR andExpression)* andExpression : predicate (OPERATOR_AND predicate)* predicate : (suffixPath | fullPath) REGEXP regularExpression regularExpression: Java standard regularexpression, like '^[a-z][0-9]$', [details](https://docs.oracle.com/javase/7/docs/api/java/util/regex/Pattern.html) Eg. select s1 from root.sg.d1 where s1 regexp '^[0-9]*$' Eg. select s1, s2 FROM root.sg.d1 where s1 regexp '^\w+([-+.]\w+)*@\w+([-.]\w+)*\.\w+([-.]\w+)*$' and s2 regexp '^\d{15}|\d{18}$' Eg. select * from root.sg.d1 where s1 regexp '^[a-zA-Z]\w{5,17}$' Eg. select * from root.sg.d1 where s1 regexp '^\d{4}-\d{1,2}-\d{1,2}' and time > 100
Like语句的用法和mysql相同, 但是仅支持对数据类型为 TEXT的列进行过滤
SELECT <SelectClause> FROM <FromClause> WHERE <WhereClause> Select Clause : <Path> [COMMA <Path>]* FromClause : < PrefixPath > [COMMA < PrefixPath >]* WhereClause : andExpression (OPERATOR_OR andExpression)* andExpression : predicate (OPERATOR_AND predicate)* predicate : (suffixPath | fullPath) LIKE likeExpression likeExpression : string that may contains "%" or "_", while "%value" means a string that ends with the value, "value%" means a string starts with the value, "%value%" means string that contains values, and "_" represents any character. Eg. select s1 from root.sg.d1 where s1 like 'abc' Eg. select s1, s2 from root.sg.d1 where s1 like 'abc%' Eg. select * from root.sg.d1 where s1 like 'abc_' Eg. select * from root.sg.d1 where s1 like 'abc\%' 这种情况,'\%'表示'%'将会被转义 结果集将显示为: | Time | Path | Value | | --- | ------------ | ----- | | 200 | root.sg.d1.s1| abc% |
CREATE USER <userName> <password>; userName:=identifier password:=string Eg: IoTDB > CREATE USER thulab 'passwd';
DROP USER <userName>; userName:=identifier Eg: IoTDB > DROP USER xiaoming;
CREATE ROLE <roleName>; roleName:=identifie Eg: IoTDB > CREATE ROLE admin;
DROP ROLE <roleName>; roleName:=identifier Eg: IoTDB > DROP ROLE admin;
GRANT USER <userName> PRIVILEGES <privileges> ON <nodeName>; userName:=identifier nodeName:=identifier (DOT identifier)* privileges:= string (COMMA string)* Eg: IoTDB > GRANT USER tempuser PRIVILEGES DELETE_TIMESERIES on root.ln;
GRANT ROLE <roleName> PRIVILEGES <privileges> ON <nodeName>; privileges:= string (COMMA string)* roleName:=identifier nodeName:=identifier (DOT identifier)* Eg: IoTDB > GRANT ROLE temprole PRIVILEGES DELETE_TIMESERIES ON root.ln;
GRANT <roleName> TO <userName>; roleName:=identifier userName:=identifier Eg: IoTDB > GRANT temprole TO tempuser;
REVOKE USER <userName> PRIVILEGES <privileges> ON <nodeName>; privileges:= string (COMMA string)* userName:=identifier nodeName:=identifier (DOT identifier)* Eg: IoTDB > REVOKE USER tempuser PRIVILEGES DELETE_TIMESERIES on root.ln;
REVOKE ROLE <roleName> PRIVILEGES <privileges> ON <nodeName>; privileges:= string (COMMA string)* roleName:= identifier nodeName:=identifier (DOT identifier)* Eg: IoTDB > REVOKE ROLE temprole PRIVILEGES DELETE_TIMESERIES ON root.ln;
REVOKE <roleName> FROM <userName>; roleName:=identifier userName:=identifier Eg: IoTDB > REVOKE temprole FROM tempuser;
LIST USER Eg: IoTDB > LIST USER
LIST ROLE Eg: IoTDB > LIST ROLE
LIST PRIVILEGES USER <username> ON <path>; username:=identifier path=‘root’ (DOT identifier)* Eg: IoTDB > LIST PRIVILEGES USER sgcc_wirte_user ON root.sgcc;
LIST ROLE PRIVILEGES <roleName> roleName:=identifier Eg: IoTDB > LIST ROLE PRIVILEGES actor;
LIST PRIVILEGES ROLE <roleName> ON <path>; roleName:=identifier path=‘root’ (DOT identifier)* Eg: IoTDB > LIST PRIVILEGES ROLE wirte_role ON root.sgcc;
LIST USER PRIVILEGES <username> ; username:=identifier Eg: IoTDB > LIST USER PRIVILEGES tempuser;
LIST ALL ROLE OF USER <username> ; username:=identifier Eg: IoTDB > LIST ALL ROLE OF USER tempuser;
LIST ALL USER OF ROLE <roleName>; roleName:=identifier Eg: IoTDB > LIST ALL USER OF ROLE roleuser;
ALTER USER <username> SET PASSWORD <password>; roleName:=identifier password:=string Eg: IoTDB > ALTER USER tempuser SET PASSWORD 'newpwd';
SELECT COUNT(Path) (COMMA COUNT(Path))* FROM <FromClause> [WHERE <WhereClause>]? Eg. SELECT COUNT(status), COUNT(temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 24 Note: the statement needs to satisfy this constraint: <PrefixPath> + <Path> = <Timeseries>
FIRST
方法在 v0.10.0
版本更名为 FIRST_VALUE
。SELECT FIRST_VALUE (Path) (COMMA FIRST_VALUE (Path))* FROM <FromClause> [WHERE <WhereClause>]? Eg. SELECT FIRST_VALUE (status), FIRST_VALUE (temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 24 Note: the statement needs to satisfy this constraint: <PrefixPath> + <Path> = <Timeseries>
SELECT LAST_VALUE (Path) (COMMA LAST_VALUE (Path))* FROM <FromClause> [WHERE <WhereClause>]? Eg. SELECT LAST_VALUE (status), LAST_VALUE (temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 24 Note: the statement needs to satisfy this constraint: <PrefixPath> + <Path> = <Timeseries>
SELECT MAX_TIME (Path) (COMMA MAX_TIME (Path))* FROM <FromClause> [WHERE <WhereClause>]? Eg. SELECT MAX_TIME(status), MAX_TIME(temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 24 Note: the statement needs to satisfy this constraint: <PrefixPath> + <Path> = <Timeseries>
SELECT MAX_VALUE (Path) (COMMA MAX_VALUE (Path))* FROM <FromClause> [WHERE <WhereClause>]? Eg. SELECT MAX_VALUE(status), MAX_VALUE(temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 24 Note: the statement needs to satisfy this constraint: <PrefixPath> + <Path> = <Timeseries>
SELECT EXTREME (Path) (COMMA EXT (Path))* FROM <FromClause> [WHERE <WhereClause>]? Eg. SELECT EXTREME(status), EXTREME(temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 24 Note: the statement needs to satisfy this constraint: <PrefixPath> + <Path> = <Timeseries>
MEAN
方法在 v0.9.0
版本更名为 AVG
。SELECT AVG (Path) (COMMA AVG (Path))* FROM <FromClause> [WHERE <WhereClause>]? Eg. SELECT AVG (temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 24 Note: the statement needs to satisfy this constraint: <PrefixPath> + <Path> = <Timeseries>
SELECT MIN_TIME (Path) (COMMA MIN_TIME (Path))*FROM <FromClause> [WHERE <WhereClause>]? Eg. SELECT MIN_TIME(status), MIN_TIME(temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 24 Note: the statement needs to satisfy this constraint: <PrefixPath> + <Path> = <Timeseries>
SELECT MIN_VALUE (Path) (COMMA MIN_VALUE (Path))* FROM <FromClause> [WHERE <WhereClause>]? Eg. SELECT MIN_VALUE(status),MIN_VALUE(temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 24 Note: the statement needs to satisfy this constraint: <PrefixPath> + <Path> = <Timeseries>
NOW() Eg. INSERT INTO root.ln.wf01.wt01(timestamp,status) VALUES(NOW(), false) Eg. DELETE FROM root.ln.wf01.wt01.status, root.ln.wf01.wt01.temperature WHERE time < NOW() Eg. SELECT * FROM root.** WHERE time < NOW() Eg. SELECT COUNT(temperature) FROM root.ln.wf01.wt01 WHERE time < NOW()
SELECT SUM(Path) (COMMA SUM(Path))* FROM <FromClause> [WHERE <WhereClause>]? Eg. SELECT SUM(temperature) FROM root.ln.wf01.wt01 WHERE root.ln.wf01.wt01.temperature < 24 Note: the statement needs to satisfy this constraint: <PrefixPath> + <Path> = <Timeseries>
IoTDB 支持对存储组级别设置数据存活时间(TTL),这使得 IoTDB 可以定期、自动地删除一定时间之前的数据。合理使用 TTL 可以帮助您控制 IoTDB 占用的总磁盘空间以避免出现磁盘写满等异常。并且,随着文件数量的增多,查询性能往往随之下降, 内存占用也会有所提高。及时地删除一些较老的文件有助于使查询性能维持在一个较高的水平和减少内存资源的占用。 IoTDB 中的 TTL 操作可以由以下的语句进行实现:
SET TTL TO StorageGroupName TTLTime Eg. SET TTL TO root.group1 3600000 这个例子展示了如何使得 root.group1 这个存储组只保留近一个小时的数据,一个小时前的数据会被删除或者进入不可见状态。 注意:TTLTime 应是毫秒时间戳。一旦 TTL 被设置,超过 TTL 时间范围的写入将被拒绝。
UNSET TTL TO StorageGroupName Eg. UNSET TTL TO root.group1 这个例子展示了如何取消存储组 root.group1 的 TTL,这将使得该存储组接受任意时刻的数据。
SHOW ALL TTL SHOW TTL ON StorageGroupNames Eg.1 SHOW ALL TTL 这个例子会给出所有存储组的 TTL。 Eg.2 SHOW TTL ON root.group1,root.group2,root.group3 这个例子会显示指定的三个存储组的 TTL。 注意:没有设置 TTL 的存储组的 TTL 将显示为 null。
注意:当您对某个存储组设置 TTL 的时候,超过 TTL 范围的数据将会立即不可见。但由于数据文件可能混合包含处在 TTL 范围内 与范围外的数据,同时数据文件可能正在接受查询,数据文件的物理删除不会立即进行。如果你在此时取消或者调大 TTL, 一部分之前不可见的数据可能重新可见,而那些已经被物理删除的数据则将永久丢失。也就是说,TTL 操作不会原子性地删除 对应的数据。因此我们不推荐您频繁修改 TTL,除非您能接受该操作带来的一定程度的不可预知性。
DELETE PARTITION StorageGroupName INT(COMMA INT)* Eg DELETE PARTITION root.sg1 0,1,2 该例子将删除存储组 root.sg1 的前三个时间分区
partitionId 可以通过查看数据文件夹获取,或者是计算 timestamp / partitionInterval
得到。
SHOW QUERY PROCESSLIST
KILL QUERY INT? E.g. KILL QUERY E.g. KILL QUERY 2
IoTDB> SET SYSTEM TO READONLY IoTDB> SET SYSTEM TO WRITABLE
QUOTE := '\''; DOT := '.'; COLON : ':' ; COMMA := ',' ; SEMICOLON := ';' ; LPAREN := '(' ; RPAREN := ')' ; LBRACKET := '['; RBRACKET := ']'; EQUAL := '=' | '=='; NOTEQUAL := '<>' | '!='; LESSTHANOREQUALTO := '<='; LESSTHAN := '<'; GREATERTHANOREQUALTO := '>='; GREATERTHAN := '>'; DIVIDE := '/'; PLUS := '+'; MINUS := '-'; STAR := '*'; Letter := 'a'..'z' | 'A'..'Z'; HexDigit := 'a'..'f' | 'A'..'F'; Digit := '0'..'9'; Boolean := TRUE | FALSE | 0 | 1 (case insensitive)
StringLiteral := ( '\'' ( ~('\'') )* '\''; eg. 'abc'
Integer := ('-' | '+')? Digit+; eg. 123 eg. -222
Float := ('-' | '+')? Digit+ DOT Digit+ (('e' | 'E') ('-' | '+')? Digit+)?; eg. 3.1415 eg. 1.2E10 eg. -1.33
Identifier := (Letter | '_') (Letter | Digit | '_' | MINUS)*; eg. a123 eg. _abc123
PointValue : Integer | Float | StringLiteral | Boolean
TimeValue : Integer | DateTime | ISO8601 | NOW() Note: Integer means timestamp type.
DateTime : eg. 2016-11-16T16:22:33+08:00 eg. 2016-11-16 16:22:33+08:00 eg. 2016-11-16T16:22:33.000+08:00 eg. 2016-11-16 16:22:33.000+08:00 Note: DateTime Type can support several types, see Chapter 3 Datetime section for details.
PrecedenceEqualOperator : EQUAL | NOTEQUAL | LESSTHANOREQUALTO | LESSTHAN | GREATERTHANOREQUALTO | GREATERTHAN
Timeseries : ROOT [DOT ]* DOT LayerName : Identifier SensorName : Identifier eg. root.ln.wf01.wt01.status eg. root.sgcc.wf03.wt01.temperature Note: Timeseries must be start with root
(case insensitive) and end with sensor name.
PrefixPath : ROOT (DOT )* LayerName : Identifier | STAR eg. root.sgcc eg. root.*
Path: (ROOT | <LayerName>) (DOT <LayerName>)* LayerName: Identifier | STAR eg. root.ln.wf01.wt01.status eg. root.*.wf01.wt01.status eg. root.ln.wf01.wt01.* eg. *.wt01.* eg. *