| import{_ as i,C as r,O as s,P as h,ah as d,Q as e,U as a,ai as t,aW as o}from"./framework-44b8a372.js";const l={},c=o('<h1 id="分布式部署-faq" tabindex="-1"><a class="header-anchor" href="#分布式部署-faq" aria-hidden="true">#</a> 分布式部署 FAQ</h1><h2 id="一、集群启停" tabindex="-1"><a class="header-anchor" href="#一、集群启停" aria-hidden="true">#</a> 一、集群启停</h2><h3 id="_1-confignode初次启动失败-如何排查原因" tabindex="-1"><a class="header-anchor" href="#_1-confignode初次启动失败-如何排查原因" aria-hidden="true">#</a> 1. ConfigNode初次启动失败,如何排查原因?</h3><ul><li>ConfigNode初次启动时确保已清空data/confignode目录</li><li>确保该ConfigNode使用到的<IP+端口>没有被占用,没有与已启动的ConfigNode使用到的<IP+端口>冲突</li><li>确保该ConfigNode的cn_target_confignode_list(指向存活的ConfigNode;如果该ConfigNode是启动的第一个ConfigNode,该值指向自身)配置正确</li><li>确保该ConfigNode的配置项(共识协议、副本数等)等与cn_target_confignode_list对应的ConfigNode集群一致</li></ul><h3 id="_2-confignode初次启动成功-show-cluster的结果里为何没有该节点" tabindex="-1"><a class="header-anchor" href="#_2-confignode初次启动成功-show-cluster的结果里为何没有该节点" aria-hidden="true">#</a> 2. ConfigNode初次启动成功,show cluster的结果里为何没有该节点?</h3><ul><li>检查cn_target_confignode_list是否正确指向了正确的地址; 如果cn_target_confignode_list指向了自身,则会启动一个新的ConfigNode集群</li></ul><h3 id="_3-datanode初次启动失败-如何排查原因" tabindex="-1"><a class="header-anchor" href="#_3-datanode初次启动失败-如何排查原因" aria-hidden="true">#</a> 3. DataNode初次启动失败,如何排查原因?</h3><ul><li>DataNode初次启动时确保已清空data/datanode目录。 如果启动结果为“Reject DataNode restart.”则表示启动时可能没有清空data/datanode目录</li><li>确保该DataNode使用到的<IP+端口>没有被占用,没有与已启动的DataNode使用到的<IP+端口>冲突</li><li>确保该DataNode的dn_target_confignode_list指向存活的ConfigNode</li></ul><h3 id="_4-移除datanode执行失败-如何排查" tabindex="-1"><a class="header-anchor" href="#_4-移除datanode执行失败-如何排查" aria-hidden="true">#</a> 4. 移除DataNode执行失败,如何排查?</h3>',9),f=e("li",null,"检查remove-datanode脚本的参数是否正确,是否传入了正确的ip:port或正确的dataNodeId",-1),g=e("li",null,"只有集群可用节点数量 > max(元数据副本数量, 数据副本数量)时,移除操作才允许被执行",-1),u=e("li",null,"执行移除DataNode的过程会将该DataNode上的数据迁移到其他存活的DataNode,数据迁移以Region为粒度,如果某个Region迁移失败,则被移除的DataNode会一直处于Removing状态",-1),_={href:"http://xn--IoTDBremove-datanode-f055at3i1sdn52bz2aw07gus4dzw4i.sh",target:"_blank",rel:"noopener noreferrer"},N=o('<h3 id="_5-挂掉的datanode是否支持移除" tabindex="-1"><a class="header-anchor" href="#_5-挂掉的datanode是否支持移除" aria-hidden="true">#</a> 5. 挂掉的DataNode是否支持移除?</h3><ul><li>当前集群副本数量大于1时可以移除。 如果集群副本数量等于1,则不支持移除。 在下个版本会推出强制移除的命令</li></ul><h3 id="_6-从0-13升级到1-0需要注意什么" tabindex="-1"><a class="header-anchor" href="#_6-从0-13升级到1-0需要注意什么" aria-hidden="true">#</a> 6. 从0.13升级到1.0需要注意什么?</h3><ul><li>0.13版本与1.0版本的文件目录结构是不同的,不能将0.13的data目录直接拷贝到1.0集群使用。如果需要将0.13的数据导入至1.0,可以使用LOAD功能</li><li>0.13版本的默认RPC地址是0.0.0.0,1.0版本的默认RPC地址是127.0.0.1</li></ul><h2 id="二、集群重启" tabindex="-1"><a class="header-anchor" href="#二、集群重启" aria-hidden="true">#</a> 二、集群重启</h2><h3 id="_1-如何重启集群中的某个confignode" tabindex="-1"><a class="header-anchor" href="#_1-如何重启集群中的某个confignode" aria-hidden="true">#</a> 1. 如何重启集群中的某个ConfigNode?</h3><ul><li>第一步:通过stop-confignode.sh或kill进程方式关闭ConfigNode进程</li><li>第二步:通过执行start-confignode.sh启动ConfigNode进程实现重启</li><li>下个版本IoTDB会提供一键重启的操作</li></ul><h3 id="_2-如何重启集群中的某个datanode" tabindex="-1"><a class="header-anchor" href="#_2-如何重启集群中的某个datanode" aria-hidden="true">#</a> 2. 如何重启集群中的某个DataNode?</h3><ul><li>第一步:通过stop-datanode.sh或kill进程方式关闭DataNode进程</li><li>第二步:通过执行start-datanode.sh启动DataNode进程实现重启</li><li>下个版本IoTDB会提供一键重启的操作</li></ul><h3 id="_3-将某个confignode移除后-remove-confignode-能否再利用该confignode的data目录重启" tabindex="-1"><a class="header-anchor" href="#_3-将某个confignode移除后-remove-confignode-能否再利用该confignode的data目录重启" aria-hidden="true">#</a> 3. 将某个ConfigNode移除后(remove-confignode),能否再利用该ConfigNode的data目录重启?</h3><ul><li>不能。会报错:Reject ConfigNode restart. Because there are no corresponding ConfigNode(whose nodeId=xx) in the cluster.</li></ul><h3 id="_4-将某个datanode移除后-remove-datanode-能否再利用该datanode的data目录重启" tabindex="-1"><a class="header-anchor" href="#_4-将某个datanode移除后-remove-datanode-能否再利用该datanode的data目录重启" aria-hidden="true">#</a> 4. 将某个DataNode移除后(remove-datanode),能否再利用该DataNode的data目录重启?</h3><ul><li>不能正常重启,启动结果为“Reject DataNode restart. Because there are no corresponding DataNode(whose nodeId=xx) in the cluster. Possible solutions are as follows:...”</li></ul>',13),m={id:"_5-用户看到某个confignode-datanode变成了unknown状态-在没有kill对应进程的情况下-直接删除掉confignode-datanode对应的data目录-然后执行start-confignode-sh-start-datanode-sh-这种情况下能成功吗",tabindex:"-1"},C=e("a",{class:"header-anchor",href:"#_5-用户看到某个confignode-datanode变成了unknown状态-在没有kill对应进程的情况下-直接删除掉confignode-datanode对应的data目录-然后执行start-confignode-sh-start-datanode-sh-这种情况下能成功吗","aria-hidden":"true"},"#",-1),D={href:"http://xn--start-confignode-p301a820q612chrvf.sh/start-datanode.sh%EF%BC%8C%E8%BF%99%E7%A7%8D%E6%83%85%E5%86%B5%E4%B8%8B%E8%83%BD%E6%88%90%E5%8A%9F%E5%90%97",target:"_blank",rel:"noopener noreferrer"},p=o('<ul><li>无法启动成功,会报错端口已被占用</li></ul><h2 id="三、集群运维" tabindex="-1"><a class="header-anchor" href="#三、集群运维" aria-hidden="true">#</a> 三、集群运维</h2><h3 id="_1-show-cluster执行失败-显示-please-check-server-status-如何排查" tabindex="-1"><a class="header-anchor" href="#_1-show-cluster执行失败-显示-please-check-server-status-如何排查" aria-hidden="true">#</a> 1. Show cluster执行失败,显示“please check server status”,如何排查?</h3><ul><li>确保ConfigNode集群一半以上的节点处于存活状态</li><li>确保客户端连接的DataNode处于存活状态</li></ul><h3 id="_2-某一datanode节点的磁盘文件损坏-如何修复这个节点" tabindex="-1"><a class="header-anchor" href="#_2-某一datanode节点的磁盘文件损坏-如何修复这个节点" aria-hidden="true">#</a> 2. 某一DataNode节点的磁盘文件损坏,如何修复这个节点?</h3><ul><li>当前只能通过remove-datanode的方式进行实现。remove-datanode执行的过程中会将该DataNode上的数据迁移至其他存活的DataNode节点(前提是集群设置的副本数大于1)</li><li>下个版本IoTDB会提供一键修复节点的功能</li></ul><h3 id="_3-如何降低confignode、datanode使用的内存" tabindex="-1"><a class="header-anchor" href="#_3-如何降低confignode、datanode使用的内存" aria-hidden="true">#</a> 3. 如何降低ConfigNode、DataNode使用的内存?</h3><ul><li>在conf/confignode-env.sh、conf/datanode-env.sh文件可通过调整MAX_HEAP_SIZE、MAX_DIRECT_MEMORY_SIZE等选项可以调整ConfigNode、DataNode使用的最大堆内、堆外内存</li></ul>',8);function x(b,I){const n=r("ExternalLinkIcon");return s(),h("div",null,[d(` |
| |
| Licensed to the Apache Software Foundation (ASF) under one |
| or more contributor license agreements. See the NOTICE file |
| distributed with this work for additional information |
| regarding copyright ownership. The ASF licenses this file |
| to you under the Apache License, Version 2.0 (the |
| "License"); you may not use this file except in compliance |
| with the License. You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, |
| software distributed under the License is distributed on an |
| "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY |
| KIND, either express or implied. See the License for the |
| specific language governing permissions and limitations |
| under the License. |
| |
| `),d(" TOC "),c,e("ul",null,[f,g,u,e("li",null,[a("补充:处于Removing状态的节点,其节点上的Region也是Removing或Unknown状态,即不可用状态。 该Remvoing状态的节点也不会接受客户端的请求。 如果要使Removing状态的节点变为可用,用户可以使用set system status to running 命令将该节点设置为Running状态; 如果要使迁移失败的Region处于可用状态,可以使用migrate region from datanodeId1 to datanodeId2 命令将该不可用的Region迁移到其他存活的节点。 "),e("a",_,[a("另外IoTDB后续也会提供remove-datanode.sh"),t(n)]),a(" -f命令,来强制移除节点(迁移失败的Region会直接丢弃)")])]),N,e("h3",m,[C,a(" 5. 用户看到某个ConfigNode/DataNode变成了Unknown状态,在没有kill对应进程的情况下,直接删除掉ConfigNode/DataNode对应的data目录,"),e("a",D,[a("然后执行start-confignode.sh/start-datanode.sh,这种情况下能成功吗"),t(n)]),a("?")]),p])}const w=i(l,[["render",x],["__file","FAQ-for-cluster-setup.html.vue"]]);export{w as default}; |