<!--

    Licensed to the Apache Software Foundation (ASF) under one
    or more contributor license agreements.  See the NOTICE file
    distributed with this work for additional information
    regarding copyright ownership.  The ASF licenses this file
    to you under the Apache License, Version 2.0 (the
    "License"); you may not use this file except in compliance
    with the License.  You may obtain a copy of the License at
    
        http://www.apache.org/licenses/LICENSE-2.0
    
    Unless required by applicable law or agreed to in writing,
    software distributed under the License is distributed on an
    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
    KIND, either express or implied.  See the License for the
    specific language governing permissions and limitations
    under the License.

-->
# Cluster Management Tool

## 1. IoTDB Data Directory Overview Tool

IoTDB data directory overview tool is used to print an overview of the IoTDB data directory structure. The location is tools/tsfile/print-iotdb-data-dir.

### 1.1 Usage

-   For Windows:

```bash
.\print-iotdb-data-dir.bat <IoTDB data folder path, separated by commas if there are multiple folders> (<storage path of the output overview file>) 
```

-   For Linux or MacOs:

```shell
./print-iotdb-data-dir.sh <IoTDB data folder path, separated by commas if there are multiple folders> (<storage path of the output overview file>) 
```

Note: if the storage path of the output overview file is not set, the default relative path "IoTDB_data_dir_overview.txt" will be used.

### 1.2 Example

Use Windows in this example:

`````````````````````````bash
.\print-iotdb-data-dir.bat D:\github\master\iotdb\data\datanode\data
````````````````````````
Starting Printing the IoTDB Data Directory Overview
````````````````````````
output save path:IoTDB_data_dir_overview.txt
data dir num:1
143  [main] WARN  o.a.i.t.c.conf.TSFileDescriptor - not found iotdb-system.properties, use the default configs.
|==============================================================
|D:\github\master\iotdb\data\datanode\data
|--sequence
|  |--root.redirect0
|  |  |--1
|  |  |  |--0
|  |--root.redirect1
|  |  |--2
|  |  |  |--0
|  |--root.redirect2
|  |  |--3
|  |  |  |--0
|  |--root.redirect3
|  |  |--4
|  |  |  |--0
|  |--root.redirect4
|  |  |--5
|  |  |  |--0
|  |--root.redirect5
|  |  |--6
|  |  |  |--0
|  |--root.sg1
|  |  |--0
|  |  |  |--0
|  |  |  |--2760
|--unsequence
|==============================================================
`````````````````````````

## 2. TsFile Sketch Tool

TsFile sketch tool is used to print the content of a TsFile in sketch mode. The location is tools/tsfile/print-tsfile.

### 2.1 Usage

-   For Windows:

```
.\print-tsfile-sketch.bat <TsFile path> (<storage path of the output sketch file>) 
```

-   For Linux or MacOs:

```
./print-tsfile-sketch.sh <TsFile path> (<storage path of the output sketch file>) 
```

Note: if the storage path of the output sketch file is not set, the default relative path "TsFile_sketch_view.txt" will be used.

### 2.2 Example

Use Windows in this example:

`````````````````````````bash
.\print-tsfile.bat D:\github\master\1669359533965-1-0-0.tsfile D:\github\master\sketch.txt
````````````````````````
Starting Printing the TsFile Sketch
````````````````````````
TsFile path:D:\github\master\1669359533965-1-0-0.tsfile
Sketch save path:D:\github\master\sketch.txt
148  [main] WARN  o.a.i.t.c.conf.TSFileDescriptor - not found iotdb-system.properties, use the default configs.
-------------------------------- TsFile Sketch --------------------------------
file path: D:\github\master\1669359533965-1-0-0.tsfile
file length: 2974

            POSITION|   CONTENT
            --------    -------
                   0|   [magic head] TsFile
                   6|   [version number] 3
||||||||||||||||||||| [Chunk Group] of root.sg1.d1, num of Chunks:3
                   7|   [Chunk Group Header]
                    |           [marker] 0
                    |           [deviceID] root.sg1.d1
                  20|   [Chunk] of root.sg1.d1.s1, startTime: 1669359533948 endTime: 1669359534047 count: 100 [minValue:-9032452783138882770,maxValue:9117677033041335123,firstValue:7068645577795875906,lastValue:-5833792328174747265,sumValue:5.795959009889246E19]
                    |           [chunk header] marker=5, measurementID=s1, dataSize=864, dataType=INT64, compressionType=SNAPPY, encodingType=RLE
                    |           [page]  UncompressedSize:862, CompressedSize:860
                 893|   [Chunk] of root.sg1.d1.s2, startTime: 1669359533948 endTime: 1669359534047 count: 100 [minValue:-8806861312244965718,maxValue:9192550740609853234,firstValue:1150295375739457693,lastValue:-2839553973758938646,sumValue:8.2822564314572677E18]
                    |           [chunk header] marker=5, measurementID=s2, dataSize=864, dataType=INT64, compressionType=SNAPPY, encodingType=RLE
                    |           [page]  UncompressedSize:862, CompressedSize:860
                1766|   [Chunk] of root.sg1.d1.s3, startTime: 1669359533948 endTime: 1669359534047 count: 100 [minValue:-9076669333460323191,maxValue:9175278522960949594,firstValue:2537897870994797700,lastValue:7194625271253769397,sumValue:-2.126008424849926E19]
                    |           [chunk header] marker=5, measurementID=s3, dataSize=864, dataType=INT64, compressionType=SNAPPY, encodingType=RLE
                    |           [page]  UncompressedSize:862, CompressedSize:860
||||||||||||||||||||| [Chunk Group] of root.sg1.d1 ends
                2656|   [marker] 2
                2657|   [TimeseriesIndex] of root.sg1.d1.s1, tsDataType:INT64, startTime: 1669359533948 endTime: 1669359534047 count: 100 [minValue:-9032452783138882770,maxValue:9117677033041335123,firstValue:7068645577795875906,lastValue:-5833792328174747265,sumValue:5.795959009889246E19]
                    |           [ChunkIndex] offset=20
                2728|   [TimeseriesIndex] of root.sg1.d1.s2, tsDataType:INT64, startTime: 1669359533948 endTime: 1669359534047 count: 100 [minValue:-8806861312244965718,maxValue:9192550740609853234,firstValue:1150295375739457693,lastValue:-2839553973758938646,sumValue:8.2822564314572677E18]
                    |           [ChunkIndex] offset=893
                2799|   [TimeseriesIndex] of root.sg1.d1.s3, tsDataType:INT64, startTime: 1669359533948 endTime: 1669359534047 count: 100 [minValue:-9076669333460323191,maxValue:9175278522960949594,firstValue:2537897870994797700,lastValue:7194625271253769397,sumValue:-2.126008424849926E19]
                    |           [ChunkIndex] offset=1766
                2870|   [IndexOfTimerseriesIndex Node] type=LEAF_MEASUREMENT
                    |           <s1, 2657>
                    |           <endOffset, 2870>
||||||||||||||||||||| [TsFileMetadata] begins
                2891|   [IndexOfTimerseriesIndex Node] type=LEAF_DEVICE
                    |           <root.sg1.d1, 2870>
                    |           <endOffset, 2891>
                    |   [meta offset] 2656
                    |   [bloom filter] bit vector byte array length=31, filterSize=256, hashFunctionSize=5
||||||||||||||||||||| [TsFileMetadata] ends
                2964|   [TsFileMetadataSize] 73
                2968|   [magic tail] TsFile
                2974|   END of TsFile
---------------------------- IndexOfTimerseriesIndex Tree -----------------------------
        [MetadataIndex:LEAF_DEVICE]
        └──────[root.sg1.d1,2870]
                        [MetadataIndex:LEAF_MEASUREMENT]
                        └──────[s1,2657]
---------------------------------- TsFile Sketch End ----------------------------------
`````````````````````````

Explanations:

-   Separated by "|", the left is the actual position in the TsFile, and the right is the summary content.
-   "||||||||||||||||||||" is the guide information added to enhance readability, not the actual data stored in TsFile.
-   The last printed "IndexOfTimerseriesIndex Tree" is a reorganization of the metadata index tree at the end of the TsFile, which is convenient for intuitive understanding, and again not the actual data stored in TsFile.

## 3. TsFile Resource Sketch Tool

TsFile resource sketch tool is used to print the content of a TsFile resource file. The location is tools/tsfile/print-tsfile-resource-files.

### 3.1 Usage

-   For Windows:

```bash
.\print-tsfile-resource-files.bat <path of the parent directory of the TsFile resource files, or path of a TsFile resource file>
```

-   For Linux or MacOs:

```
./print-tsfile-resource-files.sh <path of the parent directory of the TsFile resource files, or path of a TsFile resource file> 
```

### 3.2 Example

Use Windows in this example:

`````````````````````````bash
.\print-tsfile-resource-files.bat D:\github\master\iotdb\data\datanode\data\sequence\root.sg1\0\0
````````````````````````
Starting Printing the TsFileResources
````````````````````````
147  [main] WARN  o.a.i.t.c.conf.TSFileDescriptor - not found iotdb-system.properties, use the default configs.
230  [main] WARN  o.a.iotdb.db.conf.IoTDBDescriptor - Cannot find IOTDB_HOME or IOTDB_CONF environment variable when loading config file iotdb-system.properties, use default configuration
231  [main] WARN  o.a.iotdb.db.conf.IoTDBDescriptor - Couldn't load the configuration iotdb-system.properties from any of the known sources.
233  [main] WARN  o.a.iotdb.db.conf.IoTDBDescriptor - Cannot find IOTDB_HOME or IOTDB_CONF environment variable when loading config file iotdb-system.properties, use default configuration
237  [main] WARN  o.a.iotdb.db.conf.IoTDBDescriptor - Couldn't load the configuration iotdb-system.properties from any of the known sources.
Analyzing D:\github\master\iotdb\data\datanode\data\sequence\root.sg1\0\0\1669359533489-1-0-0.tsfile ...

Resource plan index range [9223372036854775807, -9223372036854775808]
device root.sg1.d1, start time 0 (1970-01-01T08:00+08:00[GMT+08:00]), end time 99 (1970-01-01T08:00:00.099+08:00[GMT+08:00])

Analyzing the resource file folder D:\github\master\iotdb\data\datanode\data\sequence\root.sg1\0\0 finished.
`````````````````````````

`````````````````````````bash
.\print-tsfile-resource-files.bat D:\github\master\iotdb\data\datanode\data\sequence\root.sg1\0\0\1669359533489-1-0-0.tsfile.resource
````````````````````````
Starting Printing the TsFileResources
````````````````````````
178  [main] WARN  o.a.iotdb.db.conf.IoTDBDescriptor - Cannot find IOTDB_HOME or IOTDB_CONF environment variable when loading config file iotdb-system.properties, use default configuration
186  [main] WARN  o.a.i.t.c.conf.TSFileDescriptor - not found iotdb-system.properties, use the default configs.
187  [main] WARN  o.a.iotdb.db.conf.IoTDBDescriptor - Couldn't load the configuration iotdb-system.properties from any of the known sources.
188  [main] WARN  o.a.iotdb.db.conf.IoTDBDescriptor - Cannot find IOTDB_HOME or IOTDB_CONF environment variable when loading config file iotdb-system.properties, use default configuration
192  [main] WARN  o.a.iotdb.db.conf.IoTDBDescriptor - Couldn't load the configuration iotdb-system.properties from any of the known sources.
Analyzing D:\github\master\iotdb\data\datanode\data\sequence\root.sg1\0\0\1669359533489-1-0-0.tsfile ...

Resource plan index range [9223372036854775807, -9223372036854775808]
device root.sg1.d1, start time 0 (1970-01-01T08:00+08:00[GMT+08:00]), end time 99 (1970-01-01T08:00:00.099+08:00[GMT+08:00])

Analyzing the resource file D:\github\master\iotdb\data\datanode\data\sequence\root.sg1\0\0\1669359533489-1-0-0.tsfile.resource finished.
`````````````````````````