<!--

​    Licensed to the Apache Software Foundation (ASF) under one
​    or more contributor license agreements.  See the NOTICE file
​    distributed with this work for additional information
​    regarding copyright ownership.  The ASF licenses this file
​    to you under the Apache License, Version 2.0 (the
​    "License"); you may not use this file except in compliance
​    with the License.  You may obtain a copy of the License at
​    
​        http://www.apache.org/licenses/LICENSE-2.0
​    
​    Unless required by applicable law or agreed to in writing,
​    software distributed under the License is distributed on an
​    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
​    KIND, either express or implied.  See the License for the
​    specific language governing permissions and limitations
​    under the License.

-->

# UDF Libraries

# UDF Libraries

Based on the ability of user-defined functions, IoTDB provides a series of functions for temporal data processing, including data quality, data profiling, anomaly detection, frequency domain analysis, data matching, data repairing, sequence discovery, machine learning, etc., which can meet the needs of industrial fields for temporal data processing.

> Note: The functions in the current UDF library only support millisecond level timestamp accuracy.

## Installation steps

1. Please obtain the compressed file of the UDF library JAR package that is compatible with the IoTDB version.

    | UDF installation package  | Supported IoTDB versions | Download link                                                     |
    | --------------- | ----------------- | ------------------------------------------------------------ |
    | TimechoDB-UDF-1.3.3.zip | V1.3.3 and above      |   Please contact Timecho for assistance  |
    | TimechoDB-UDF-1.3.2.zip | V1.0.0～V1.3.2  |  Please contact Timecho for assistance|
    
2. Place the `library-udf.jar` file in the compressed file obtained in the directory `/ext/udf ` of all nodes in the IoTDB cluster
3. In the SQL command line terminal (CLI) or visualization console (Workbench) SQL operation interface of IoTDB, execute the corresponding function registration statement as follows.
4.  Batch registration: Two registration methods: registration script or SQL full statement
- Register Script 
    - Copy the registration script (`register-UDF.sh` or `register-UDF.bat`) from the compressed package to the `tools` directory of IoTDB as needed, and modify the parameters in the script (default is host=127.0.0.1, rpcPort=6667, user=root, pass=root);
    - Start IoTDB service, run registration script to batch register UDF

- All SQL statements
    - Open the SQl file in the compressed package, copy all SQL statements, and execute all SQl statements in the SQL command line terminal (CLI) of IoTDB or the SQL operation interface of the visualization console (Workbench) to batch register UDF

## Data Quality

### Completeness

#### Registration statement

```sql
create function completeness as 'org.apache.iotdb.library.dquality.UDTFCompleteness'
```

#### Usage

This function calculates the completeness of a time series, which measures the presence or absence of missing values in the time series data. The function divides the input time series data into consecutive non-overlapping time windows, computes the data completeness for each window individually, and outputs the timestamp of the first data point in the window along with the completeness result.

**Name:** COMPLETENESS

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `window`: The size of each window. It is a positive integer or a positive number with an unit. The former is the number of data points in each window. The number of data points in the last window may be less than it. The latter is the time of the window. The unit is 'ms' for millisecond, 's' for second, 'm' for minute, 'h' for hour and 'd' for day. By default, all input data belongs to the same window.
+ `downtime`: Whether the downtime exception is considered in the calculation of completeness. It is 'true' or 'false' (default). When considering the downtime exception, long-term missing data will be considered as downtime exception without any influence on completeness.

**Output Series:** Output a single series. The type is DOUBLE. The range of each value is [0,1].

**Note:** Only when the number of data points in the window exceeds 10, the calculation will be performed. Otherwise, the window will be ignored and nothing will be output.

#### Examples

##### Default Parameters

With default parameters, this function will regard all input data as the same window.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:02.000+08:00|          100.0|
|2020-01-01T00:00:03.000+08:00|          101.0|
|2020-01-01T00:00:04.000+08:00|          102.0|
|2020-01-01T00:00:06.000+08:00|          104.0|
|2020-01-01T00:00:08.000+08:00|          126.0|
|2020-01-01T00:00:10.000+08:00|          108.0|
|2020-01-01T00:00:14.000+08:00|          112.0|
|2020-01-01T00:00:15.000+08:00|          113.0|
|2020-01-01T00:00:16.000+08:00|          114.0|
|2020-01-01T00:00:18.000+08:00|          116.0|
|2020-01-01T00:00:20.000+08:00|          118.0|
|2020-01-01T00:00:22.000+08:00|          120.0|
|2020-01-01T00:00:26.000+08:00|          124.0|
|2020-01-01T00:00:28.000+08:00|          126.0|
|2020-01-01T00:00:30.000+08:00|            NaN|
+-----------------------------+---------------+
```

SQL for query:

```sql
select completeness(s1) from root.test.d1 where time <= 2020-01-01 00:00:30
```

Output series:

```
+-----------------------------+-----------------------------+
|                         Time|completeness(root.test.d1.s1)|
+-----------------------------+-----------------------------+
|2020-01-01T00:00:02.000+08:00|                        0.875|
+-----------------------------+-----------------------------+
```

##### Specific Window Size

When the window size is given, this function will divide the input data as multiple windows.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:02.000+08:00|          100.0|
|2020-01-01T00:00:03.000+08:00|          101.0|
|2020-01-01T00:00:04.000+08:00|          102.0|
|2020-01-01T00:00:06.000+08:00|          104.0|
|2020-01-01T00:00:08.000+08:00|          126.0|
|2020-01-01T00:00:10.000+08:00|          108.0|
|2020-01-01T00:00:14.000+08:00|          112.0|
|2020-01-01T00:00:15.000+08:00|          113.0|
|2020-01-01T00:00:16.000+08:00|          114.0|
|2020-01-01T00:00:18.000+08:00|          116.0|
|2020-01-01T00:00:20.000+08:00|          118.0|
|2020-01-01T00:00:22.000+08:00|          120.0|
|2020-01-01T00:00:26.000+08:00|          124.0|
|2020-01-01T00:00:28.000+08:00|          126.0|
|2020-01-01T00:00:30.000+08:00|            NaN|
|2020-01-01T00:00:32.000+08:00|          130.0|
|2020-01-01T00:00:34.000+08:00|          132.0|
|2020-01-01T00:00:36.000+08:00|          134.0|
|2020-01-01T00:00:38.000+08:00|          136.0|
|2020-01-01T00:00:40.000+08:00|          138.0|
|2020-01-01T00:00:42.000+08:00|          140.0|
|2020-01-01T00:00:44.000+08:00|          142.0|
|2020-01-01T00:00:46.000+08:00|          144.0|
|2020-01-01T00:00:48.000+08:00|          146.0|
|2020-01-01T00:00:50.000+08:00|          148.0|
|2020-01-01T00:00:52.000+08:00|          150.0|
|2020-01-01T00:00:54.000+08:00|          152.0|
|2020-01-01T00:00:56.000+08:00|          154.0|
|2020-01-01T00:00:58.000+08:00|          156.0|
|2020-01-01T00:01:00.000+08:00|          158.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select completeness(s1,"window"="15") from root.test.d1 where time <= 2020-01-01 00:01:00
```

Output series:

```
+-----------------------------+--------------------------------------------+
|                         Time|completeness(root.test.d1.s1, "window"="15")|
+-----------------------------+--------------------------------------------+
|2020-01-01T00:00:02.000+08:00|                                       0.875|
|2020-01-01T00:00:32.000+08:00|                                         1.0|
+-----------------------------+--------------------------------------------+
```

### Consistency

#### Registration statement

```sql
create function consistency as 'org.apache.iotdb.library.dquality.UDTFConsistency'
```

#### Usage

This function calculates the consistency of a time series, which measures whether the changes in the time series data are stable and follow uniform patterns. The function divides the input time series data into consecutive non-overlapping time windows, computes the data consistency for each window individually, and outputs the timestamp of the first data point in the window along with the consistency result.

**Name:** CONSISTENCY

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `window`: The size of each window. It is a positive integer or a positive number with an unit. The former is the number of data points in each window. The number of data points in the last window may be less than it. The latter is the time of the window. The unit is 'ms' for millisecond, 's' for second, 'm' for minute, 'h' for hour and 'd' for day. By default, all input data belongs to the same window.

**Output Series:** Output a single series. The type is DOUBLE. The range of each value is [0,1].

**Note:** Only when the number of data points in the window exceeds 10, the calculation will be performed. Otherwise, the window will be ignored and nothing will be output.

#### Examples

##### Default Parameters

With default parameters, this function will regard all input data as the same window.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:02.000+08:00|          100.0|
|2020-01-01T00:00:03.000+08:00|          101.0|
|2020-01-01T00:00:04.000+08:00|          102.0|
|2020-01-01T00:00:06.000+08:00|          104.0|
|2020-01-01T00:00:08.000+08:00|          126.0|
|2020-01-01T00:00:10.000+08:00|          108.0|
|2020-01-01T00:00:14.000+08:00|          112.0|
|2020-01-01T00:00:15.000+08:00|          113.0|
|2020-01-01T00:00:16.000+08:00|          114.0|
|2020-01-01T00:00:18.000+08:00|          116.0|
|2020-01-01T00:00:20.000+08:00|          118.0|
|2020-01-01T00:00:22.000+08:00|          120.0|
|2020-01-01T00:00:26.000+08:00|          124.0|
|2020-01-01T00:00:28.000+08:00|          126.0|
|2020-01-01T00:00:30.000+08:00|            NaN|
+-----------------------------+---------------+
```

SQL for query:

```sql
select consistency(s1) from root.test.d1 where time <= 2020-01-01 00:00:30
```

Output series:

```
+-----------------------------+----------------------------+
|                         Time|consistency(root.test.d1.s1)|
+-----------------------------+----------------------------+
|2020-01-01T00:00:02.000+08:00|          0.9333333333333333|
+-----------------------------+----------------------------+
```

##### Specific Window Size

When the window size is given, this function will divide the input data as multiple windows.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:02.000+08:00|          100.0|
|2020-01-01T00:00:03.000+08:00|          101.0|
|2020-01-01T00:00:04.000+08:00|          102.0|
|2020-01-01T00:00:06.000+08:00|          104.0|
|2020-01-01T00:00:08.000+08:00|          126.0|
|2020-01-01T00:00:10.000+08:00|          108.0|
|2020-01-01T00:00:14.000+08:00|          112.0|
|2020-01-01T00:00:15.000+08:00|          113.0|
|2020-01-01T00:00:16.000+08:00|          114.0|
|2020-01-01T00:00:18.000+08:00|          116.0|
|2020-01-01T00:00:20.000+08:00|          118.0|
|2020-01-01T00:00:22.000+08:00|          120.0|
|2020-01-01T00:00:26.000+08:00|          124.0|
|2020-01-01T00:00:28.000+08:00|          126.0|
|2020-01-01T00:00:30.000+08:00|            NaN|
|2020-01-01T00:00:32.000+08:00|          130.0|
|2020-01-01T00:00:34.000+08:00|          132.0|
|2020-01-01T00:00:36.000+08:00|          134.0|
|2020-01-01T00:00:38.000+08:00|          136.0|
|2020-01-01T00:00:40.000+08:00|          138.0|
|2020-01-01T00:00:42.000+08:00|          140.0|
|2020-01-01T00:00:44.000+08:00|          142.0|
|2020-01-01T00:00:46.000+08:00|          144.0|
|2020-01-01T00:00:48.000+08:00|          146.0|
|2020-01-01T00:00:50.000+08:00|          148.0|
|2020-01-01T00:00:52.000+08:00|          150.0|
|2020-01-01T00:00:54.000+08:00|          152.0|
|2020-01-01T00:00:56.000+08:00|          154.0|
|2020-01-01T00:00:58.000+08:00|          156.0|
|2020-01-01T00:01:00.000+08:00|          158.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select consistency(s1,"window"="15") from root.test.d1 where time <= 2020-01-01 00:01:00
```

Output series:

```
+-----------------------------+-------------------------------------------+
|                         Time|consistency(root.test.d1.s1, "window"="15")|
+-----------------------------+-------------------------------------------+
|2020-01-01T00:00:02.000+08:00|                         0.9333333333333333|
|2020-01-01T00:00:32.000+08:00|                                        1.0|
+-----------------------------+-------------------------------------------+
```

### Timeliness

#### Registration statement

```sql
create function timeliness as 'org.apache.iotdb.library.dquality.UDTFTimeliness'
```

#### Usage

This function calculates the timeliness of a time series, which measures whether the time series data is collected and reported on schedule. The function divides the input time series data into consecutive non-overlapping time windows, computes the data timeliness for each window individually, and outputs the timestamp of the first data point in the window along with the timeliness result.

**Name:** TIMELINESS

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `window`: The size of each window. It is a positive integer or a positive number with an unit. The former is the number of data points in each window. The number of data points in the last window may be less than it. The latter is the time of the window. The unit is 'ms' for millisecond, 's' for second, 'm' for minute, 'h' for hour and 'd' for day. By default, all input data belongs to the same window.

**Output Series:** Output a single series. The type is DOUBLE. The range of each value is [0,1].

**Note:** Only when the number of data points in the window exceeds 10, the calculation will be performed. Otherwise, the window will be ignored and nothing will be output.

#### Examples

##### Default Parameters

With default parameters, this function will regard all input data as the same window.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:02.000+08:00|          100.0|
|2020-01-01T00:00:03.000+08:00|          101.0|
|2020-01-01T00:00:04.000+08:00|          102.0|
|2020-01-01T00:00:06.000+08:00|          104.0|
|2020-01-01T00:00:08.000+08:00|          126.0|
|2020-01-01T00:00:10.000+08:00|          108.0|
|2020-01-01T00:00:14.000+08:00|          112.0|
|2020-01-01T00:00:15.000+08:00|          113.0|
|2020-01-01T00:00:16.000+08:00|          114.0|
|2020-01-01T00:00:18.000+08:00|          116.0|
|2020-01-01T00:00:20.000+08:00|          118.0|
|2020-01-01T00:00:22.000+08:00|          120.0|
|2020-01-01T00:00:26.000+08:00|          124.0|
|2020-01-01T00:00:28.000+08:00|          126.0|
|2020-01-01T00:00:30.000+08:00|            NaN|
+-----------------------------+---------------+
```

SQL for query:

```sql
select timeliness(s1) from root.test.d1 where time <= 2020-01-01 00:00:30
```

Output series:

```
+-----------------------------+---------------------------+
|                         Time|timeliness(root.test.d1.s1)|
+-----------------------------+---------------------------+
|2020-01-01T00:00:02.000+08:00|         0.9333333333333333|
+-----------------------------+---------------------------+
```

##### Specific Window Size

When the window size is given, this function will divide the input data as multiple windows.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:02.000+08:00|          100.0|
|2020-01-01T00:00:03.000+08:00|          101.0|
|2020-01-01T00:00:04.000+08:00|          102.0|
|2020-01-01T00:00:06.000+08:00|          104.0|
|2020-01-01T00:00:08.000+08:00|          126.0|
|2020-01-01T00:00:10.000+08:00|          108.0|
|2020-01-01T00:00:14.000+08:00|          112.0|
|2020-01-01T00:00:15.000+08:00|          113.0|
|2020-01-01T00:00:16.000+08:00|          114.0|
|2020-01-01T00:00:18.000+08:00|          116.0|
|2020-01-01T00:00:20.000+08:00|          118.0|
|2020-01-01T00:00:22.000+08:00|          120.0|
|2020-01-01T00:00:26.000+08:00|          124.0|
|2020-01-01T00:00:28.000+08:00|          126.0|
|2020-01-01T00:00:30.000+08:00|            NaN|
|2020-01-01T00:00:32.000+08:00|          130.0|
|2020-01-01T00:00:34.000+08:00|          132.0|
|2020-01-01T00:00:36.000+08:00|          134.0|
|2020-01-01T00:00:38.000+08:00|          136.0|
|2020-01-01T00:00:40.000+08:00|          138.0|
|2020-01-01T00:00:42.000+08:00|          140.0|
|2020-01-01T00:00:44.000+08:00|          142.0|
|2020-01-01T00:00:46.000+08:00|          144.0|
|2020-01-01T00:00:48.000+08:00|          146.0|
|2020-01-01T00:00:50.000+08:00|          148.0|
|2020-01-01T00:00:52.000+08:00|          150.0|
|2020-01-01T00:00:54.000+08:00|          152.0|
|2020-01-01T00:00:56.000+08:00|          154.0|
|2020-01-01T00:00:58.000+08:00|          156.0|
|2020-01-01T00:01:00.000+08:00|          158.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select timeliness(s1,"window"="15") from root.test.d1 where time <= 2020-01-01 00:01:00
```

Output series:

```
+-----------------------------+------------------------------------------+
|                         Time|timeliness(root.test.d1.s1, "window"="15")|
+-----------------------------+------------------------------------------+
|2020-01-01T00:00:02.000+08:00|                        0.9333333333333333|
|2020-01-01T00:00:32.000+08:00|                                       1.0|
+-----------------------------+------------------------------------------+
```

### Validity

#### Registration statement

```sql
create function validity as 'org.apache.iotdb.library.dquality.UDTFValidity'
```

#### Usage

This function calculates the validity of a time series, which measures whether the time series data is normal, usable, and free of outliers. The function divides the input time series data into consecutive non-overlapping time windows, computes the data validity for each window individually, and outputs the timestamp of the first data point in the window along with the validity result.

**Name:** VALIDITY

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `window`: The size of each window. It is a positive integer or a positive number with an unit. The former is the number of data points in each window. The number of data points in the last window may be less than it. The latter is the time of the window. The unit is 'ms' for millisecond, 's' for second, 'm' for minute, 'h' for hour and 'd' for day. By default, all input data belongs to the same window.

**Output Series:** Output a single series. The type is DOUBLE. The range of each value is [0,1].

**Note:** Only when the number of data points in the window exceeds 10, the calculation will be performed. Otherwise, the window will be ignored and nothing will be output.

#### Examples

##### Default Parameters

With default parameters, this function will regard all input data as the same window.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:02.000+08:00|          100.0|
|2020-01-01T00:00:03.000+08:00|          101.0|
|2020-01-01T00:00:04.000+08:00|          102.0|
|2020-01-01T00:00:06.000+08:00|          104.0|
|2020-01-01T00:00:08.000+08:00|          126.0|
|2020-01-01T00:00:10.000+08:00|          108.0|
|2020-01-01T00:00:14.000+08:00|          112.0|
|2020-01-01T00:00:15.000+08:00|          113.0|
|2020-01-01T00:00:16.000+08:00|          114.0|
|2020-01-01T00:00:18.000+08:00|          116.0|
|2020-01-01T00:00:20.000+08:00|          118.0|
|2020-01-01T00:00:22.000+08:00|          120.0|
|2020-01-01T00:00:26.000+08:00|          124.0|
|2020-01-01T00:00:28.000+08:00|          126.0|
|2020-01-01T00:00:30.000+08:00|            NaN|
+-----------------------------+---------------+
```

SQL for query:

```sql
select Validity(s1) from root.test.d1 where time <= 2020-01-01 00:00:30
```

Output series:

```
+-----------------------------+-------------------------+
|                         Time|validity(root.test.d1.s1)|
+-----------------------------+-------------------------+
|2020-01-01T00:00:02.000+08:00|       0.8833333333333333|
+-----------------------------+-------------------------+
```

##### Specific Window Size

When the window size is given, this function will divide the input data as multiple windows.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:02.000+08:00|          100.0|
|2020-01-01T00:00:03.000+08:00|          101.0|
|2020-01-01T00:00:04.000+08:00|          102.0|
|2020-01-01T00:00:06.000+08:00|          104.0|
|2020-01-01T00:00:08.000+08:00|          126.0|
|2020-01-01T00:00:10.000+08:00|          108.0|
|2020-01-01T00:00:14.000+08:00|          112.0|
|2020-01-01T00:00:15.000+08:00|          113.0|
|2020-01-01T00:00:16.000+08:00|          114.0|
|2020-01-01T00:00:18.000+08:00|          116.0|
|2020-01-01T00:00:20.000+08:00|          118.0|
|2020-01-01T00:00:22.000+08:00|          120.0|
|2020-01-01T00:00:26.000+08:00|          124.0|
|2020-01-01T00:00:28.000+08:00|          126.0|
|2020-01-01T00:00:30.000+08:00|            NaN|
|2020-01-01T00:00:32.000+08:00|          130.0|
|2020-01-01T00:00:34.000+08:00|          132.0|
|2020-01-01T00:00:36.000+08:00|          134.0|
|2020-01-01T00:00:38.000+08:00|          136.0|
|2020-01-01T00:00:40.000+08:00|          138.0|
|2020-01-01T00:00:42.000+08:00|          140.0|
|2020-01-01T00:00:44.000+08:00|          142.0|
|2020-01-01T00:00:46.000+08:00|          144.0|
|2020-01-01T00:00:48.000+08:00|          146.0|
|2020-01-01T00:00:50.000+08:00|          148.0|
|2020-01-01T00:00:52.000+08:00|          150.0|
|2020-01-01T00:00:54.000+08:00|          152.0|
|2020-01-01T00:00:56.000+08:00|          154.0|
|2020-01-01T00:00:58.000+08:00|          156.0|
|2020-01-01T00:01:00.000+08:00|          158.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select Validity(s1,"window"="15") from root.test.d1 where time <= 2020-01-01 00:01:00
```

Output series:

```
+-----------------------------+----------------------------------------+
|                         Time|validity(root.test.d1.s1, "window"="15")|
+-----------------------------+----------------------------------------+
|2020-01-01T00:00:02.000+08:00|                      0.8833333333333333|
|2020-01-01T00:00:32.000+08:00|                                     1.0|
+-----------------------------+----------------------------------------+
```


<!--

​    Licensed to the Apache Software Foundation (ASF) under one
​    or more contributor license agreements.  See the NOTICE file
​    distributed with this work for additional information
​    regarding copyright ownership.  The ASF licenses this file
​    to you under the Apache License, Version 2.0 (the
​    "License"); you may not use this file except in compliance
​    with the License.  You may obtain a copy of the License at
​    
​        http://www.apache.org/licenses/LICENSE-2.0
​    
​    Unless required by applicable law or agreed to in writing,
​    software distributed under the License is distributed on an
​    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
​    KIND, either express or implied.  See the License for the
​    specific language governing permissions and limitations
​    under the License.

-->


## Data Profiling

### ACF

#### Registration statement

```sql
create function acf as 'org.apache.iotdb.library.dprofile.UDTFACF'
```

#### Usage

This function is used to calculate the auto-correlation factor of the input time series,
which equals to cross correlation between the same series.
For more information, please refer to [XCorr](#XCorr) function.

**Name:** ACF

**Input Series:** Only support a single input numeric series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Output Series:** Output a single series. The type is DOUBLE.
There are $2N-1$ data points in the series, and the values are interpreted in details in [XCorr](#XCorr) function.

**Note:**

+ `null` and `NaN` values in the input series will be ignored and treated as 0.

#### Examples

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:01.000+08:00|              1|
|2020-01-01T00:00:02.000+08:00|           null|
|2020-01-01T00:00:03.000+08:00|              3|
|2020-01-01T00:00:04.000+08:00|            NaN|
|2020-01-01T00:00:05.000+08:00|              5|
+-----------------------------+---------------+
```

SQL for query:

```sql
select acf(s1) from root.test.d1 where time <= 2020-01-01 00:00:05
```

Output series:

```
+-----------------------------+--------------------+
|                         Time|acf(root.test.d1.s1)|
+-----------------------------+--------------------+
|1970-01-01T08:00:00.000+08:00|                 5.0|
|1970-01-01T08:00:00.001+08:00|                 0.0|
|1970-01-01T08:00:00.002+08:00|                 6.0|
|1970-01-01T08:00:00.003+08:00|                 0.0|
|1970-01-01T08:00:00.004+08:00|                 7.0|
|1970-01-01T08:00:00.005+08:00|                 0.0|
|1970-01-01T08:00:00.006+08:00|                 3.6|
|1970-01-01T08:00:00.007+08:00|                 0.0|
|1970-01-01T08:00:00.008+08:00|                 1.0|
+-----------------------------+--------------------+
```

### Distinct

#### Registration statement

```sql
create function distinct as 'org.apache.iotdb.library.dprofile.UDTFDistinct'
```

#### Usage

This function returns all unique values in time series.

**Name:** DISTINCT

**Input Series:** Only support a single input series. The type is arbitrary.

**Output Series:** Output a single series. The type is the same as the input.

**Note:**

+ The timestamp of the output series is meaningless. The output order is arbitrary.
+ Missing points and null points in the input series will be ignored, but `NaN` will not.
+ Case Sensitive.


#### Examples

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d2.s2|
+-----------------------------+---------------+
|2020-01-01T08:00:00.001+08:00|          Hello|
|2020-01-01T08:00:00.002+08:00|          hello|
|2020-01-01T08:00:00.003+08:00|          Hello|
|2020-01-01T08:00:00.004+08:00|          World|
|2020-01-01T08:00:00.005+08:00|          World|
+-----------------------------+---------------+
```

SQL for query:

```sql
select distinct(s2) from root.test.d2
```

Output series:

```
+-----------------------------+-------------------------+
|                         Time|distinct(root.test.d2.s2)|
+-----------------------------+-------------------------+
|1970-01-01T08:00:00.001+08:00|                    Hello|
|1970-01-01T08:00:00.002+08:00|                    hello|
|1970-01-01T08:00:00.003+08:00|                    World|
+-----------------------------+-------------------------+
```

### Histogram

#### Registration statement

```sql
create function histogram as 'org.apache.iotdb.library.dprofile.UDTFHistogram'
```

#### Usage

This function is used to calculate the distribution histogram of a single column of numerical data.

**Name:** HISTOGRAM

**Input Series:** Only supports a single input sequence, the type is INT32 / INT64 / FLOAT / DOUBLE

**Parameters:**

+ `min`: The lower limit of the requested data range, the default value is -Double.MAX_VALUE.
+ `max`: The upper limit of the requested data range, the default value is Double.MAX_VALUE, and the value of start must be less than or equal to end.
+ `count`: The number of buckets of the histogram, the default value is 1. It must be a positive integer.

**Output Series:** The value of the bucket of the histogram, where the lower bound represented by the i-th bucket (index starts from 1) is $min+ (i-1)\cdot\frac{max-min}{count}$ and the upper bound is $min + i \cdot \frac{max-min}{count}$.

**Note:**

+ If the value is lower than `min`, it will be put into the 1st bucket. If the value is larger than `max`, it will be put into the last bucket.
+ Missing points, null points and `NaN` in the input series will be ignored.

#### Examples

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:00.000+08:00|            1.0|
|2020-01-01T00:00:01.000+08:00|            2.0|
|2020-01-01T00:00:02.000+08:00|            3.0|
|2020-01-01T00:00:03.000+08:00|            4.0|
|2020-01-01T00:00:04.000+08:00|            5.0|
|2020-01-01T00:00:05.000+08:00|            6.0|
|2020-01-01T00:00:06.000+08:00|            7.0|
|2020-01-01T00:00:07.000+08:00|            8.0|
|2020-01-01T00:00:08.000+08:00|            9.0|
|2020-01-01T00:00:09.000+08:00|           10.0|
|2020-01-01T00:00:10.000+08:00|           11.0|
|2020-01-01T00:00:11.000+08:00|           12.0|
|2020-01-01T00:00:12.000+08:00|           13.0|
|2020-01-01T00:00:13.000+08:00|           14.0|
|2020-01-01T00:00:14.000+08:00|           15.0|
|2020-01-01T00:00:15.000+08:00|           16.0|
|2020-01-01T00:00:16.000+08:00|           17.0|
|2020-01-01T00:00:17.000+08:00|           18.0|
|2020-01-01T00:00:18.000+08:00|           19.0|
|2020-01-01T00:00:19.000+08:00|           20.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select histogram(s1,"min"="1","max"="20","count"="10") from root.test.d1
```

Output series:

```
+-----------------------------+---------------------------------------------------------------+
|                         Time|histogram(root.test.d1.s1, "min"="1", "max"="20", "count"="10")|
+-----------------------------+---------------------------------------------------------------+
|1970-01-01T08:00:00.000+08:00|                                                              2|
|1970-01-01T08:00:00.001+08:00|                                                              2|
|1970-01-01T08:00:00.002+08:00|                                                              2|
|1970-01-01T08:00:00.003+08:00|                                                              2|
|1970-01-01T08:00:00.004+08:00|                                                              2|
|1970-01-01T08:00:00.005+08:00|                                                              2|
|1970-01-01T08:00:00.006+08:00|                                                              2|
|1970-01-01T08:00:00.007+08:00|                                                              2|
|1970-01-01T08:00:00.008+08:00|                                                              2|
|1970-01-01T08:00:00.009+08:00|                                                              2|
+-----------------------------+---------------------------------------------------------------+
```

### Integral

#### Registration statement

```sql
create function integral as 'org.apache.iotdb.library.dprofile.UDAFIntegral'
```

#### Usage

This function is used to calculate the integration of time series,
which equals to the area under the curve with time as X-axis and values as Y-axis.

**Name:** INTEGRAL

**Input Series:** Only support a single input numeric series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `unit`: The unit of time used when computing the integral.
  The value should be chosen from "1S", "1s", "1m", "1H", "1d"(case-sensitive),
  and each represents taking one millisecond / second / minute / hour / day as 1.0 while calculating the area and integral.

**Output Series:** Output a single series. The type is DOUBLE. There is only one data point in the series, whose timestamp is 0 and value is the integration.

**Note:**

+ The integral value equals to the sum of the areas of right-angled trapezoids consisting of each two adjacent points and the time-axis.
  Choosing different `unit` implies different scaling of time axis, thus making it apparent to convert the value among those results with constant coefficient.

+ `NaN` values in the input series will be ignored. The curve or trapezoids will skip these points and use the next valid point.

#### Examples

##### Default Parameters

With default parameters, this function will take one second as 1.0.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:01.000+08:00|              1|
|2020-01-01T00:00:02.000+08:00|              2|
|2020-01-01T00:00:03.000+08:00|              5|
|2020-01-01T00:00:04.000+08:00|              6|
|2020-01-01T00:00:05.000+08:00|              7|
|2020-01-01T00:00:08.000+08:00|              8|
|2020-01-01T00:00:09.000+08:00|            NaN|
|2020-01-01T00:00:10.000+08:00|             10|
+-----------------------------+---------------+
```

SQL for query:

```sql
select integral(s1) from root.test.d1 where time <= 2020-01-01 00:00:10
```

Output series:

```
+-----------------------------+-------------------------+
|                         Time|integral(root.test.d1.s1)|
+-----------------------------+-------------------------+
|1970-01-01T08:00:00.000+08:00|                     57.5|
+-----------------------------+-------------------------+
```

Calculation expression:
$$\frac{1}{2}[(1+2) \times 1 + (2+5) \times 1 + (5+6) \times 1 + (6+7) \times 1 + (7+8) \times 3 + (8+10) \times 2] = 57.5$$

##### Specific time unit

With time unit specified as "1m", this function will take one minute as 1.0.

Input series is the same as above, the SQL for query is shown below:

```sql
select integral(s1, "unit"="1m") from root.test.d1 where time <= 2020-01-01 00:00:10
```

Output series:

```
+-----------------------------+-------------------------+
|                         Time|integral(root.test.d1.s1)|
+-----------------------------+-------------------------+
|1970-01-01T08:00:00.000+08:00|                    0.958|
+-----------------------------+-------------------------+
```

Calculation expression:
$$\frac{1}{2\times 60}[(1+2) \times 1 + (2+5) \times 1 + (5+6) \times 1 + (6+7) \times 1 + (7+8) \times 3 + (8+10) \times 2] = 0.958$$

### IntegralAvg

#### Registration statement

```sql
create function integralavg as 'org.apache.iotdb.library.dprofile.UDAFIntegralAvg'
```

#### Usage

This function is used to calculate the function average of time series.
The output equals to the area divided by the time interval using the same time `unit`.
For more information of the area under the curve, please refer to `Integral` function.

**Name:** INTEGRALAVG

**Input Series:** Only support a single input numeric series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Output Series:** Output a single series. The type is DOUBLE. There is only one data point in the series, whose timestamp is 0 and value is the time-weighted average.

**Note:**

+ The time-weighted value equals to the integral value with any `unit` divided by the time interval of input series.
  The result is irrelevant to the time unit used in integral, and it's consistent with the timestamp precision of IoTDB by default.

+ `NaN` values in the input series will be ignored. The curve or trapezoids will skip these points and use the next valid point.

+ If the input series is empty, the output value will be 0.0, but if there is only one data point, the value will equal to the input value.

#### Examples

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:01.000+08:00|              1|
|2020-01-01T00:00:02.000+08:00|              2|
|2020-01-01T00:00:03.000+08:00|              5|
|2020-01-01T00:00:04.000+08:00|              6|
|2020-01-01T00:00:05.000+08:00|              7|
|2020-01-01T00:00:08.000+08:00|              8|
|2020-01-01T00:00:09.000+08:00|            NaN|
|2020-01-01T00:00:10.000+08:00|             10|
+-----------------------------+---------------+
```

SQL for query:

```sql
select integralavg(s1) from root.test.d1 where time <= 2020-01-01 00:00:10
```

Output series:

```
+-----------------------------+----------------------------+
|                         Time|integralavg(root.test.d1.s1)|
+-----------------------------+----------------------------+
|1970-01-01T08:00:00.000+08:00|           6.388888888888889|
+-----------------------------+----------------------------+
```

Calculation expression:
$$\frac{1}{2}[(1+2) \times 1 + (2+5) \times 1 + (5+6) \times 1 + (6+7) \times 1 + (7+8) \times 3 + (8+10) \times 2] / 10 = 5.75$$

### Mad

#### Registration statement

```sql
create function mad as 'org.apache.iotdb.library.dprofile.UDAFMad'
```

#### Usage

The function is used to compute the exact or approximate median absolute deviation (MAD) of a numeric time series. MAD is the median of the deviation of each element from the elements' median.

Take a dataset $\{1,3,3,5,5,6,7,8,9\}$ as an instance. Its median is 5 and the deviation of each element from the median is $\{0,0,1,2,2,2,3,4,4\}$, whose median is 2. Therefore, the MAD of the original dataset is 2.

**Name:** MAD

**Input Series:** Only support a single input series. The data type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameter:**

+ `error`: The relative error of the approximate MAD. It should be within [0,1) and the default value is 0. Taking `error`=0.01 as an instance, suppose the exact MAD is $a$ and the approximate MAD is $b$, we have $0.99a \le b \le 1.01a$. With `error`=0, the output is the exact MAD.

**Output Series:** Output a single series. The type is DOUBLE. There is only one data point in the series, whose timestamp is 0 and value is the MAD.

**Note:** Missing points, null points and `NaN` in the input series will be ignored.

#### Examples

##### Approximate Query

By setting `error` within (0,1), the function queries the approximate MAD.

Input series:

```
+-----------------------------+------------+
|                         Time|root.test.s1|
+-----------------------------+------------+
|1970-01-01T08:00:00.100+08:00|         0.0|
|1970-01-01T08:00:00.200+08:00|         0.0|
|1970-01-01T08:00:00.300+08:00|         1.0|
|1970-01-01T08:00:00.400+08:00|        -1.0|
|1970-01-01T08:00:00.500+08:00|         0.0|
|1970-01-01T08:00:00.600+08:00|         0.0|
|1970-01-01T08:00:00.700+08:00|        -2.0|
|1970-01-01T08:00:00.800+08:00|         2.0|
|1970-01-01T08:00:00.900+08:00|         0.0|
|1970-01-01T08:00:01.000+08:00|         0.0|
|1970-01-01T08:00:01.100+08:00|         1.0|
|1970-01-01T08:00:01.200+08:00|        -1.0|
|1970-01-01T08:00:01.300+08:00|        -1.0|
|1970-01-01T08:00:01.400+08:00|         1.0|
|1970-01-01T08:00:01.500+08:00|         0.0|
|1970-01-01T08:00:01.600+08:00|         0.0|
|1970-01-01T08:00:01.700+08:00|        10.0|
|1970-01-01T08:00:01.800+08:00|         2.0|
|1970-01-01T08:00:01.900+08:00|        -2.0|
|1970-01-01T08:00:02.000+08:00|         0.0|
+-----------------------------+------------+
............
Total line number = 20
```

SQL for query:

```sql
select mad(s1, "error"="0.01") from root.test
```

Output series:

```
+-----------------------------+---------------------------------+
|                         Time|mad(root.test.s1, "error"="0.01")|
+-----------------------------+---------------------------------+
|1970-01-01T08:00:00.000+08:00|               0.9900000000000001|
+-----------------------------+---------------------------------+
```

### Median

#### Registration statement

```sql
create function median as 'org.apache.iotdb.library.dprofile.UDAFMedian'
```

#### Usage

The function is used to compute the exact or approximate median of a numeric time series. Median is the value separating the higher half from the lower half of a data sample.

**Name:** MEDIAN

**Input Series:** Only support a single input series. The data type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameter:**

+ `error`: The rank error of the approximate median. It should be within [0,1) and the default value is 0. For instance, a median with `error`=0.01 is the value of the element with rank percentage 0.49~0.51. With `error`=0, the output is the exact median.

**Output Series:** Output a single series. The type is DOUBLE. There is only one data point in the series, whose timestamp is 0 and value is the median.

#### Examples

Input series:

```
+-----------------------------+------------+
|                         Time|root.test.s1|
+-----------------------------+------------+
|1970-01-01T08:00:00.100+08:00|         0.0|
|1970-01-01T08:00:00.200+08:00|         0.0|
|1970-01-01T08:00:00.300+08:00|         1.0|
|1970-01-01T08:00:00.400+08:00|        -1.0|
|1970-01-01T08:00:00.500+08:00|         0.0|
|1970-01-01T08:00:00.600+08:00|         0.0|
|1970-01-01T08:00:00.700+08:00|        -2.0|
|1970-01-01T08:00:00.800+08:00|         2.0|
|1970-01-01T08:00:00.900+08:00|         0.0|
|1970-01-01T08:00:01.000+08:00|         0.0|
|1970-01-01T08:00:01.100+08:00|         1.0|
|1970-01-01T08:00:01.200+08:00|        -1.0|
|1970-01-01T08:00:01.300+08:00|        -1.0|
|1970-01-01T08:00:01.400+08:00|         1.0|
|1970-01-01T08:00:01.500+08:00|         0.0|
|1970-01-01T08:00:01.600+08:00|         0.0|
|1970-01-01T08:00:01.700+08:00|        10.0|
|1970-01-01T08:00:01.800+08:00|         2.0|
|1970-01-01T08:00:01.900+08:00|        -2.0|
|1970-01-01T08:00:02.000+08:00|         0.0|
+-----------------------------+------------+
Total line number = 20
```

SQL for query:

```sql
select median(s1, "error"="0.01") from root.test
```

Output series:

```
+-----------------------------+------------------------------------+
|                         Time|median(root.test.s1, "error"="0.01")|
+-----------------------------+------------------------------------+
|1970-01-01T08:00:00.000+08:00|                                 0.0|
+-----------------------------+------------------------------------+
```

### MinMax

#### Registration statement

```sql
create function minmax as 'org.apache.iotdb.library.dprofile.UDTFMinMax'
```

#### Usage

This function is used to standardize the input series with min-max. Minimum value is transformed to 0; maximum value is transformed to 1.

**Name:** MINMAX

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

+ `compute`: When set to "batch", anomaly test is conducted after importing all data points; when set to "stream", it is required to provide minimum and maximum values. The default method is "batch".
+ `min`: The maximum value when method is set to "stream".
+ `max`: The minimum value when method is set to "stream".

**Output Series:** Output a single series. The type is DOUBLE.

#### Examples

##### Batch computing

Input series:

```
+-----------------------------+------------+
|                         Time|root.test.s1|
+-----------------------------+------------+
|1970-01-01T08:00:00.100+08:00|         0.0|
|1970-01-01T08:00:00.200+08:00|         0.0|
|1970-01-01T08:00:00.300+08:00|         1.0|
|1970-01-01T08:00:00.400+08:00|        -1.0|
|1970-01-01T08:00:00.500+08:00|         0.0|
|1970-01-01T08:00:00.600+08:00|         0.0|
|1970-01-01T08:00:00.700+08:00|        -2.0|
|1970-01-01T08:00:00.800+08:00|         2.0|
|1970-01-01T08:00:00.900+08:00|         0.0|
|1970-01-01T08:00:01.000+08:00|         0.0|
|1970-01-01T08:00:01.100+08:00|         1.0|
|1970-01-01T08:00:01.200+08:00|        -1.0|
|1970-01-01T08:00:01.300+08:00|        -1.0|
|1970-01-01T08:00:01.400+08:00|         1.0|
|1970-01-01T08:00:01.500+08:00|         0.0|
|1970-01-01T08:00:01.600+08:00|         0.0|
|1970-01-01T08:00:01.700+08:00|        10.0|
|1970-01-01T08:00:01.800+08:00|         2.0|
|1970-01-01T08:00:01.900+08:00|        -2.0|
|1970-01-01T08:00:02.000+08:00|         0.0|
+-----------------------------+------------+
```

SQL for query:

```sql
select minmax(s1) from root.test
```

Output series:

```
+-----------------------------+--------------------+
|                         Time|minmax(root.test.s1)|
+-----------------------------+--------------------+
|1970-01-01T08:00:00.100+08:00| 0.16666666666666666|
|1970-01-01T08:00:00.200+08:00| 0.16666666666666666|
|1970-01-01T08:00:00.300+08:00|                0.25|
|1970-01-01T08:00:00.400+08:00| 0.08333333333333333|
|1970-01-01T08:00:00.500+08:00| 0.16666666666666666|
|1970-01-01T08:00:00.600+08:00| 0.16666666666666666|
|1970-01-01T08:00:00.700+08:00|                 0.0|
|1970-01-01T08:00:00.800+08:00|  0.3333333333333333|
|1970-01-01T08:00:00.900+08:00| 0.16666666666666666|
|1970-01-01T08:00:01.000+08:00| 0.16666666666666666|
|1970-01-01T08:00:01.100+08:00|                0.25|
|1970-01-01T08:00:01.200+08:00| 0.08333333333333333|
|1970-01-01T08:00:01.300+08:00| 0.08333333333333333|
|1970-01-01T08:00:01.400+08:00|                0.25|
|1970-01-01T08:00:01.500+08:00| 0.16666666666666666|
|1970-01-01T08:00:01.600+08:00| 0.16666666666666666|
|1970-01-01T08:00:01.700+08:00|                 1.0|
|1970-01-01T08:00:01.800+08:00|  0.3333333333333333|
|1970-01-01T08:00:01.900+08:00|                 0.0|
|1970-01-01T08:00:02.000+08:00| 0.16666666666666666|
+-----------------------------+--------------------+
```


### MvAvg

#### Registration statement

```sql
create function mvavg as 'org.apache.iotdb.library.dprofile.UDTFMvAvg'
```

#### Usage

This function is used to calculate moving average of input series.

**Name:** MVAVG

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

+ `window`: Length of the moving window. Default value is 10.

**Output Series:** Output a single series. The type is DOUBLE.

#### Examples

##### Batch computing

Input series:

```
+-----------------------------+------------+
|                         Time|root.test.s1|
+-----------------------------+------------+
|1970-01-01T08:00:00.100+08:00|         0.0|
|1970-01-01T08:00:00.200+08:00|         0.0|
|1970-01-01T08:00:00.300+08:00|         1.0|
|1970-01-01T08:00:00.400+08:00|        -1.0|
|1970-01-01T08:00:00.500+08:00|         0.0|
|1970-01-01T08:00:00.600+08:00|         0.0|
|1970-01-01T08:00:00.700+08:00|        -2.0|
|1970-01-01T08:00:00.800+08:00|         2.0|
|1970-01-01T08:00:00.900+08:00|         0.0|
|1970-01-01T08:00:01.000+08:00|         0.0|
|1970-01-01T08:00:01.100+08:00|         1.0|
|1970-01-01T08:00:01.200+08:00|        -1.0|
|1970-01-01T08:00:01.300+08:00|        -1.0|
|1970-01-01T08:00:01.400+08:00|         1.0|
|1970-01-01T08:00:01.500+08:00|         0.0|
|1970-01-01T08:00:01.600+08:00|         0.0|
|1970-01-01T08:00:01.700+08:00|        10.0|
|1970-01-01T08:00:01.800+08:00|         2.0|
|1970-01-01T08:00:01.900+08:00|        -2.0|
|1970-01-01T08:00:02.000+08:00|         0.0|
+-----------------------------+------------+
```

SQL for query:

```sql
select mvavg(s1, "window"="3") from root.test
```

Output series:

```
+-----------------------------+---------------------------------+
|                         Time|mvavg(root.test.s1, "window"="3")|
+-----------------------------+---------------------------------+
|1970-01-01T08:00:00.300+08:00|               0.3333333333333333|
|1970-01-01T08:00:00.400+08:00|              -0.3333333333333333|
|1970-01-01T08:00:00.500+08:00|                              0.0|
|1970-01-01T08:00:00.600+08:00|              -0.3333333333333333|
|1970-01-01T08:00:00.700+08:00|              -0.3333333333333333|
|1970-01-01T08:00:00.800+08:00|               0.6666666666666666|
|1970-01-01T08:00:00.900+08:00|                              0.0|
|1970-01-01T08:00:01.000+08:00|               0.6666666666666666|
|1970-01-01T08:00:01.100+08:00|              -0.3333333333333333|
|1970-01-01T08:00:01.200+08:00|              -0.3333333333333333|
|1970-01-01T08:00:01.300+08:00|              -0.3333333333333333|
|1970-01-01T08:00:01.400+08:00|                              0.0|
|1970-01-01T08:00:01.500+08:00|               0.3333333333333333|
|1970-01-01T08:00:01.600+08:00|               0.3333333333333333|
|1970-01-01T08:00:01.700+08:00|                              3.0|
|1970-01-01T08:00:01.800+08:00|               0.6666666666666666|
|1970-01-01T08:00:01.900+08:00|              -0.6666666666666666|
|1970-01-01T08:00:02.000+08:00|              -3.3333333333333335|
+-----------------------------+---------------------------------+
```

### PACF

#### Registration statement

```sql
create function pacf as 'org.apache.iotdb.library.dprofile.UDTFPACF'
```

#### Usage

This function is used to calculate partial autocorrelation of input series by solving Yule-Walker equation. For some cases, the equation may not be solved, and NaN will be output.

**Name:** PACF

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

+ `lag`: Maximum lag of pacf to calculate. The default value is $\min(10\log_{10}n,n-1)$, where $n$ is the number of data points.

**Output Series:** Output a single series. The type is DOUBLE.

#### Examples

##### Assigning maximum lag

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:01.000+08:00|              1|
|2020-01-01T00:00:02.000+08:00|            NaN|
|2020-01-01T00:00:03.000+08:00|              3|
|2020-01-01T00:00:04.000+08:00|            NaN|
|2020-01-01T00:00:05.000+08:00|              5|
+-----------------------------+---------------+
```

SQL for query:

```sql
select pacf(s1, "lag"="5") from root.test.d1
```

Output series:

```
+-----------------------------+--------------------------------+
|                         Time|pacf(root.test.d1.s1, "lag"="5")|
+-----------------------------+--------------------------------+
|2020-01-01T00:00:01.000+08:00|                             1.0|
|2020-01-01T00:00:02.000+08:00|             -0.5744680851063829|
|2020-01-01T00:00:03.000+08:00|              0.3172297297297296|
|2020-01-01T00:00:04.000+08:00|             -0.2977686586304181|
|2020-01-01T00:00:05.000+08:00|             -2.0609033521065867|
+-----------------------------+--------------------------------+
```

### Percentile

#### Registration statement

```sql
create function percentile as 'org.apache.iotdb.library.dprofile.UDAFPercentile'
```

#### Usage

The function is used to compute the exact or approximate percentile of a numeric time series. A percentile is value of element in the certain rank of the sorted series.

**Name:** PERCENTILE

**Input Series:** Only support a single input series. The data type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameter:**

+ `rank`: The rank percentage of the percentile. It should be (0,1] and the default value is 0.5. For instance, a percentile with `rank`=0.5 is the median.
+ `error`: The rank error of the approximate percentile. It should be within [0,1) and the default value is 0. For instance, a 0.5-percentile with `error`=0.01 is the value of the element with rank percentage 0.49~0.51. With `error`=0, the output is the exact percentile.

**Output Series:** Output a single series. The type is the same as input series. If `error`=0, there is only one data point in the series, whose timestamp is the same has which the first percentile value has, and value is the percentile, otherwise the timestamp of the only data point is 0.

**Note:** Missing points, null points and `NaN` in the input series will be ignored.

#### Examples

Input series:

```
+-----------------------------+-------------+
|                         Time|root.test2.s1|
+-----------------------------+-------------+
|1970-01-01T08:00:00.100+08:00|          0.0|
|1970-01-01T08:00:00.200+08:00|          0.0|
|1970-01-01T08:00:00.300+08:00|          1.0|
|1970-01-01T08:00:00.400+08:00|         -1.0|
|1970-01-01T08:00:00.500+08:00|          0.0|
|1970-01-01T08:00:00.600+08:00|          0.0|
|1970-01-01T08:00:00.700+08:00|         -2.0|
|1970-01-01T08:00:00.800+08:00|          2.0|
|1970-01-01T08:00:00.900+08:00|          0.0|
|1970-01-01T08:00:01.000+08:00|          0.0|
|1970-01-01T08:00:01.100+08:00|          1.0|
|1970-01-01T08:00:01.200+08:00|         -1.0|
|1970-01-01T08:00:01.300+08:00|         -1.0|
|1970-01-01T08:00:01.400+08:00|          1.0|
|1970-01-01T08:00:01.500+08:00|          0.0|
|1970-01-01T08:00:01.600+08:00|          0.0|
|1970-01-01T08:00:01.700+08:00|         10.0|
|1970-01-01T08:00:01.800+08:00|          2.0|
|1970-01-01T08:00:01.900+08:00|         -2.0|
|1970-01-01T08:00:02.000+08:00|          0.0|
+-----------------------------+-------------+
Total line number = 20
```

SQL for query:

```sql
select percentile(s0, "rank"="0.2", "error"="0.01") from root.test
```

Output series:

```
+-----------------------------+-------------------------------------------------------+
|                         Time|percentile(root.test2.s1, "rank"="0.2", "error"="0.01")|
+-----------------------------+-------------------------------------------------------+
|1970-01-01T08:00:00.000+08:00|                                                   -1.0|
+-----------------------------+-------------------------------------------------------+
```

### Quantile

#### Registration statement

```sql
create function quantile as 'org.apache.iotdb.library.dprofile.UDAFQuantile'
```

#### Usage

The function is used to compute the approximate quantile of a numeric time series. A quantile is value of element in the certain rank of the sorted series.

**Name:** QUANTILE

**Input Series:** Only support a single input series. The data type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameter:**

+ `rank`: The rank of the quantile. It should be (0,1] and the default value is 0.5. For instance, a quantile with `rank`=0.5 is the median.
+ `K`: The size of KLL sketch maintained in the query. It should be within [100,+inf) and the default value is 800. For instance, the 0.5-quantile computed by a KLL sketch with K=800 items is a value with rank quantile 0.49~0.51 with a confidence of at least 99%. The result will be more accurate as K increases.

**Output Series:** Output a single series. The type is the same as input series. The timestamp of the only data point is 0.

**Note:** Missing points, null points and `NaN` in the input series will be ignored.

#### Examples

Input series:

```
+-----------------------------+-------------+
|                         Time|root.test1.s1|
+-----------------------------+-------------+
|2021-03-17T10:32:17.054+08:00|            7|
|2021-03-17T10:32:18.054+08:00|           15|
|2021-03-17T10:32:19.054+08:00|           36|
|2021-03-17T10:32:20.054+08:00|           39|
|2021-03-17T10:32:21.054+08:00|           40|
|2021-03-17T10:32:22.054+08:00|           41|
|2021-03-17T10:32:23.054+08:00|           20|
|2021-03-17T10:32:24.054+08:00|           18|
+-----------------------------+-------------+
............
Total line number = 8
```

SQL for query:

```sql
select quantile(s1, "rank"="0.2", "K"="800") from root.test1
```

Output series:

```
+-----------------------------+------------------------------------------------+
|                         Time|quantile(root.test1.s1, "rank"="0.2", "K"="800")|
+-----------------------------+------------------------------------------------+
|1970-01-01T08:00:00.000+08:00|                               7.000000000000001|
+-----------------------------+------------------------------------------------+
```

### Period

#### Registration statement

```sql
create function period as 'org.apache.iotdb.library.dprofile.UDAFPeriod'
```

#### Usage

The function is used to compute the period of a numeric time series.

**Name:** PERIOD

**Input Series:** Only support a single input series. The data type is INT32 / INT64 / FLOAT / DOUBLE.

**Output Series:** Output a single series. The type is INT32. There is only one data point in the series, whose timestamp is 0 and value is the period.

#### Examples

Input series:


```
+-----------------------------+---------------+
|                         Time|root.test.d3.s1|
+-----------------------------+---------------+
|1970-01-01T08:00:00.001+08:00|            1.0|
|1970-01-01T08:00:00.002+08:00|            2.0|
|1970-01-01T08:00:00.003+08:00|            3.0|
|1970-01-01T08:00:00.004+08:00|            1.0|
|1970-01-01T08:00:00.005+08:00|            2.0|
|1970-01-01T08:00:00.006+08:00|            3.0|
|1970-01-01T08:00:00.007+08:00|            1.0|
|1970-01-01T08:00:00.008+08:00|            2.0|
|1970-01-01T08:00:00.009+08:00|            3.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select period(s1) from root.test.d3
```

Output series:

```
+-----------------------------+-----------------------+
|                         Time|period(root.test.d3.s1)|
+-----------------------------+-----------------------+
|1970-01-01T08:00:00.000+08:00|                      3|
+-----------------------------+-----------------------+
```

### QLB

#### Registration statement

```sql
create function qlb as 'org.apache.iotdb.library.dprofile.UDTFQLB'
```

#### Usage

This function is used to calculate Ljung-Box statistics $Q_{LB}$ for time series, and convert it to p value.

**Name:** QLB

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters**:

`lag`: max lag to calculate. Legal input shall be integer from 1 to n-2, where n is the sample number. Default value is n-2.

**Output Series:** Output a single series. The type is DOUBLE. The output series is p value, and timestamp means lag.

**Note:** If you want to calculate Ljung-Box statistics $Q_{LB}$ instead of p value, you may use ACF function.

#### Examples

##### Using Default Parameter

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|1970-01-01T00:00:00.100+08:00|           1.22|
|1970-01-01T00:00:00.200+08:00|          -2.78|
|1970-01-01T00:00:00.300+08:00|           1.53|
|1970-01-01T00:00:00.400+08:00|           0.70|
|1970-01-01T00:00:00.500+08:00|           0.75|
|1970-01-01T00:00:00.600+08:00|          -0.72|
|1970-01-01T00:00:00.700+08:00|          -0.22|
|1970-01-01T00:00:00.800+08:00|           0.28|
|1970-01-01T00:00:00.900+08:00|           0.57|
|1970-01-01T00:00:01.000+08:00|          -0.22|
|1970-01-01T00:00:01.100+08:00|          -0.72|
|1970-01-01T00:00:01.200+08:00|           1.34|
|1970-01-01T00:00:01.300+08:00|          -0.25|
|1970-01-01T00:00:01.400+08:00|           0.17|
|1970-01-01T00:00:01.500+08:00|           2.51|
|1970-01-01T00:00:01.600+08:00|           1.42|
|1970-01-01T00:00:01.700+08:00|          -1.34|
|1970-01-01T00:00:01.800+08:00|          -0.01|
|1970-01-01T00:00:01.900+08:00|          -0.49|
|1970-01-01T00:00:02.000+08:00|           1.63|
+-----------------------------+---------------+
```

SQL for query:

```sql
select QLB(s1) from root.test.d1
```

Output series:

```
+-----------------------------+---------------------+
|                         Time| QLB(root.test.d1.s1)|
+-----------------------------+---------------------+
|1970-01-01T08:00:00.021+08:00|             -0.31671|
|1970-01-01T08:00:00.001+08:00|  0.12748561639660716|
|1970-01-01T08:00:00.022+08:00| -0.17051499999999997|
|1970-01-01T08:00:00.002+08:00|  0.21941409592365868|
|1970-01-01T08:00:00.023+08:00| -0.11341499999999997|
|1970-01-01T08:00:00.003+08:00|   0.3384920824593398|
|1970-01-01T08:00:00.024+08:00|              0.26146|
|1970-01-01T08:00:00.004+08:00|  0.26293189359893154|
|1970-01-01T08:00:00.025+08:00|  0.06431999999999996|
|1970-01-01T08:00:00.005+08:00|  0.37265953802871943|
|1970-01-01T08:00:00.026+08:00| 0.036919999999999994|
|1970-01-01T08:00:00.006+08:00|   0.4923218142923832|
|1970-01-01T08:00:00.027+08:00|-0.009294999999999993|
|1970-01-01T08:00:00.007+08:00|    0.609628728420623|
|1970-01-01T08:00:00.028+08:00|  0.12271499999999999|
|1970-01-01T08:00:00.008+08:00|   0.6510708392264906|
|1970-01-01T08:00:00.029+08:00| 0.008480000000000033|
|1970-01-01T08:00:00.009+08:00|   0.7430561964288097|
|1970-01-01T08:00:00.030+08:00| -0.21764500000000003|
|1970-01-01T08:00:00.010+08:00|   0.6236738200492055|
|1970-01-01T08:00:00.031+08:00|  0.35853999999999997|
|1970-01-01T08:00:00.011+08:00|  0.21487390993160937|
|1970-01-01T08:00:00.032+08:00|  0.18115499999999998|
|1970-01-01T08:00:00.012+08:00|  0.18479562182870324|
|1970-01-01T08:00:00.033+08:00| -0.27745499999999995|
|1970-01-01T08:00:00.013+08:00|  0.07329862193377235|
|1970-01-01T08:00:00.034+08:00| -0.22418500000000002|
|1970-01-01T08:00:00.014+08:00| 0.038000864459751926|
|1970-01-01T08:00:00.035+08:00|  0.31609000000000004|
|1970-01-01T08:00:00.015+08:00| 0.004052989734200874|
|1970-01-01T08:00:00.036+08:00| -0.06078500000000001|
|1970-01-01T08:00:00.016+08:00| 0.005663787468609627|
|1970-01-01T08:00:00.037+08:00|  0.19219499999999998|
|1970-01-01T08:00:00.017+08:00|0.0016316380755082571|
|1970-01-01T08:00:00.038+08:00|             -0.25646|
|1970-01-01T08:00:00.018+08:00|2.0047954405910673E-5|
+-----------------------------+---------------------+
```

### Resample

#### Registration statement

```sql
create function re_sample as 'org.apache.iotdb.library.dprofile.UDTFResample'
```

#### Usage

This function is used to resample the input series according to a given frequency,
including up-sampling and down-sampling.
Currently, the supported up-sampling methods are
NaN (filling with `NaN`),
FFill (filling with previous value),
BFill (filling with next value) and
Linear (filling with linear interpolation).
Down-sampling relies on group aggregation,
which supports Max, Min, First, Last, Mean and Median.

**Name:** RESAMPLE

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**


+ `every`: The frequency of resampling, which is a positive number with an unit. The unit is 'ms' for millisecond, 's' for second, 'm' for minute, 'h' for hour and 'd' for day. This parameter cannot be lacked.
+ `interp`: The interpolation method of up-sampling, which is 'NaN', 'FFill', 'BFill' or 'Linear'. By default, NaN is used.
+ `aggr`: The aggregation method of down-sampling, which is 'Max', 'Min', 'First', 'Last', 'Mean' or 'Median'. By default, Mean is used.
+ `start`: The start time (inclusive) of resampling with the format 'yyyy-MM-dd HH:mm:ss'. By default, it is the timestamp of the first valid data point.
+ `end`: The end time (exclusive) of resampling with the format 'yyyy-MM-dd HH:mm:ss'. By default, it is the timestamp of the last valid data point.

**Output Series:** Output a single series. The type is DOUBLE. It is strictly equispaced with the frequency `every`.

**Note:** `NaN` in the input series will be ignored.

#### Examples

##### Up-sampling

When the frequency of resampling is higher than the original frequency, up-sampling starts.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2021-03-06T16:00:00.000+08:00|           3.09|
|2021-03-06T16:15:00.000+08:00|           3.53|
|2021-03-06T16:30:00.000+08:00|            3.5|
|2021-03-06T16:45:00.000+08:00|           3.51|
|2021-03-06T17:00:00.000+08:00|           3.41|
+-----------------------------+---------------+
```


SQL for query:

```sql
select resample(s1,'every'='5m','interp'='linear') from root.test.d1
```

Output series:

```
+-----------------------------+----------------------------------------------------------+
|                         Time|resample(root.test.d1.s1, "every"="5m", "interp"="linear")|
+-----------------------------+----------------------------------------------------------+
|2021-03-06T16:00:00.000+08:00|                                        3.0899999141693115|
|2021-03-06T16:05:00.000+08:00|                                        3.2366665999094644|
|2021-03-06T16:10:00.000+08:00|                                        3.3833332856496177|
|2021-03-06T16:15:00.000+08:00|                                        3.5299999713897705|
|2021-03-06T16:20:00.000+08:00|                                        3.5199999809265137|
|2021-03-06T16:25:00.000+08:00|                                         3.509999990463257|
|2021-03-06T16:30:00.000+08:00|                                                       3.5|
|2021-03-06T16:35:00.000+08:00|                                         3.503333330154419|
|2021-03-06T16:40:00.000+08:00|                                         3.506666660308838|
|2021-03-06T16:45:00.000+08:00|                                         3.509999990463257|
|2021-03-06T16:50:00.000+08:00|                                        3.4766666889190674|
|2021-03-06T16:55:00.000+08:00|                                         3.443333387374878|
|2021-03-06T17:00:00.000+08:00|                                        3.4100000858306885|
+-----------------------------+----------------------------------------------------------+
```

##### Down-sampling

When the frequency of resampling is lower than the original frequency, down-sampling starts.

Input series is the same as above, the SQL for query is shown below:

```sql
select resample(s1,'every'='30m','aggr'='first') from root.test.d1
```

Output series:

```
+-----------------------------+--------------------------------------------------------+
|                         Time|resample(root.test.d1.s1, "every"="30m", "aggr"="first")|
+-----------------------------+--------------------------------------------------------+
|2021-03-06T16:00:00.000+08:00|                                      3.0899999141693115|
|2021-03-06T16:30:00.000+08:00|                                                     3.5|
|2021-03-06T17:00:00.000+08:00|                                      3.4100000858306885|
+-----------------------------+--------------------------------------------------------+
```


##### Specify the time period

The time period of resampling can be specified with `start` and `end`.
The period outside the actual time range will be interpolated.

Input series is the same as above, the SQL for query is shown below:

```sql
select resample(s1,'every'='30m','start'='2021-03-06 15:00:00') from root.test.d1
```

Output series:

```
+-----------------------------+-----------------------------------------------------------------------+
|                         Time|resample(root.test.d1.s1, "every"="30m", "start"="2021-03-06 15:00:00")|
+-----------------------------+-----------------------------------------------------------------------+
|2021-03-06T15:00:00.000+08:00|                                                                    NaN|
|2021-03-06T15:30:00.000+08:00|                                                                    NaN|
|2021-03-06T16:00:00.000+08:00|                                                      3.309999942779541|
|2021-03-06T16:30:00.000+08:00|                                                     3.5049999952316284|
|2021-03-06T17:00:00.000+08:00|                                                     3.4100000858306885|
+-----------------------------+-----------------------------------------------------------------------+
```

### Sample

#### Registration statement

```sql
create function sample as 'org.apache.iotdb.library.dprofile.UDTFSample'
```

#### Usage

This function is used to sample the input series,
that is, select a specified number of data points from the input series and output them.
Currently, three sampling methods are supported:
**Reservoir sampling** randomly selects data points.
All of the points have the same probability of being sampled.
**Isometric sampling** selects data points at equal index intervals.
**Triangle sampling** assigns data points to the buckets based on the number of sampling. 
Then it calculates the area of the triangle based on these points inside the bucket and selects the point with the largest area of the triangle. 
For more detail, please read [paper](http://skemman.is/stream/get/1946/15343/37285/3/SS_MSthesis.pdf)

**Name:** SAMPLE

**Input Series:** Only support a single input series. The type is arbitrary.

**Parameters:**

+ `method`: The method of sampling, which is 'reservoir', 'isometric' or 'triangle'. By default, reservoir sampling is used.
+ `k`: The number of sampling, which is a positive integer. By default, it's 1.

**Output Series:** Output a single series. The type is the same as the input. The length of the output series is `k`. Each data point in the output series comes from the input series.

**Note:** If `k` is greater than the length of input series, all data points in the input series will be output.

#### Examples

##### Reservoir Sampling

When `method` is 'reservoir' or the default, reservoir sampling is used.
Due to the randomness of this method, the output series shown below is only a possible result.


Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:01.000+08:00|            1.0|
|2020-01-01T00:00:02.000+08:00|            2.0|
|2020-01-01T00:00:03.000+08:00|            3.0|
|2020-01-01T00:00:04.000+08:00|            4.0|
|2020-01-01T00:00:05.000+08:00|            5.0|
|2020-01-01T00:00:06.000+08:00|            6.0|
|2020-01-01T00:00:07.000+08:00|            7.0|
|2020-01-01T00:00:08.000+08:00|            8.0|
|2020-01-01T00:00:09.000+08:00|            9.0|
|2020-01-01T00:00:10.000+08:00|           10.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select sample(s1,'method'='reservoir','k'='5') from root.test.d1
```

Output series:

```
+-----------------------------+------------------------------------------------------+
|                         Time|sample(root.test.d1.s1, "method"="reservoir", "k"="5")|
+-----------------------------+------------------------------------------------------+
|2020-01-01T00:00:01.000+08:00|                                                   1.0|
|2020-01-01T00:00:05.000+08:00|                                                   5.0|
|2020-01-01T00:00:06.000+08:00|                                                   6.0|
|2020-01-01T00:00:08.000+08:00|                                                   8.0|
|2020-01-01T00:00:09.000+08:00|                                                   9.0|
+-----------------------------+------------------------------------------------------+
```

##### Isometric Sampling

When `method` is 'isometric', isometric sampling is used.

Input series is the same as above, the SQL for query is shown below:

```sql
select sample(s1,'method'='isometric','k'='5') from root.test.d1
```

Output series:

```
+-----------------------------+------------------------------------------------------+
|                         Time|sample(root.test.d1.s1, "method"="isometric", "k"="5")|
+-----------------------------+------------------------------------------------------+
|2020-01-01T00:00:01.000+08:00|                                                   1.0|
|2020-01-01T00:00:03.000+08:00|                                                   3.0|
|2020-01-01T00:00:05.000+08:00|                                                   5.0|
|2020-01-01T00:00:07.000+08:00|                                                   7.0|
|2020-01-01T00:00:09.000+08:00|                                                   9.0|
+-----------------------------+------------------------------------------------------+
```

### Segment

#### Registration statement

```sql
create function segment as 'org.apache.iotdb.library.dprofile.UDTFSegment'
```

#### Usage

This function is used to segment a time series into subsequences according to linear trend, and returns linear fitted values of first values in each subsequence or every data point.

**Name:** SEGMENT

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `output` :"all" to output all fitted points; "first" to output first fitted points in each subsequence.

+ `error`: error allowed at linear regression. It is defined as mean absolute error of a subsequence.

**Output Series:** Output a single series. The type is DOUBLE.

**Note:** This function treat input series as equal-interval sampled. All data are loaded, so downsample input series first if there are too many data points.

#### Examples

Input series:

```
+-----------------------------+------------+
|                         Time|root.test.s1|
+-----------------------------+------------+
|1970-01-01T08:00:00.000+08:00|         5.0|
|1970-01-01T08:00:00.100+08:00|         0.0|
|1970-01-01T08:00:00.200+08:00|         1.0|
|1970-01-01T08:00:00.300+08:00|         2.0|
|1970-01-01T08:00:00.400+08:00|         3.0|
|1970-01-01T08:00:00.500+08:00|         4.0|
|1970-01-01T08:00:00.600+08:00|         5.0|
|1970-01-01T08:00:00.700+08:00|         6.0|
|1970-01-01T08:00:00.800+08:00|         7.0|
|1970-01-01T08:00:00.900+08:00|         8.0|
|1970-01-01T08:00:01.000+08:00|         9.0|
|1970-01-01T08:00:01.100+08:00|         9.1|
|1970-01-01T08:00:01.200+08:00|         9.2|
|1970-01-01T08:00:01.300+08:00|         9.3|
|1970-01-01T08:00:01.400+08:00|         9.4|
|1970-01-01T08:00:01.500+08:00|         9.5|
|1970-01-01T08:00:01.600+08:00|         9.6|
|1970-01-01T08:00:01.700+08:00|         9.7|
|1970-01-01T08:00:01.800+08:00|         9.8|
|1970-01-01T08:00:01.900+08:00|         9.9|
|1970-01-01T08:00:02.000+08:00|        10.0|
|1970-01-01T08:00:02.100+08:00|         8.0|
|1970-01-01T08:00:02.200+08:00|         6.0|
|1970-01-01T08:00:02.300+08:00|         4.0|
|1970-01-01T08:00:02.400+08:00|         2.0|
|1970-01-01T08:00:02.500+08:00|         0.0|
|1970-01-01T08:00:02.600+08:00|        -2.0|
|1970-01-01T08:00:02.700+08:00|        -4.0|
|1970-01-01T08:00:02.800+08:00|        -6.0|
|1970-01-01T08:00:02.900+08:00|        -8.0|
|1970-01-01T08:00:03.000+08:00|       -10.0|
|1970-01-01T08:00:03.100+08:00|        10.0|
|1970-01-01T08:00:03.200+08:00|        10.0|
|1970-01-01T08:00:03.300+08:00|        10.0|
|1970-01-01T08:00:03.400+08:00|        10.0|
|1970-01-01T08:00:03.500+08:00|        10.0|
|1970-01-01T08:00:03.600+08:00|        10.0|
|1970-01-01T08:00:03.700+08:00|        10.0|
|1970-01-01T08:00:03.800+08:00|        10.0|
|1970-01-01T08:00:03.900+08:00|        10.0|
+-----------------------------+------------+
```

SQL for query:

```sql
select segment(s1, "error"="0.1") from root.test
```

Output series:

```
+-----------------------------+------------------------------------+
|                         Time|segment(root.test.s1, "error"="0.1")|
+-----------------------------+------------------------------------+
|1970-01-01T08:00:00.000+08:00|                                 5.0|
|1970-01-01T08:00:00.200+08:00|                                 1.0|
|1970-01-01T08:00:01.000+08:00|                                 9.0|
|1970-01-01T08:00:02.000+08:00|                                10.0|
|1970-01-01T08:00:03.000+08:00|                               -10.0|
|1970-01-01T08:00:03.200+08:00|                                10.0|
+-----------------------------+------------------------------------+
```

### Skew

#### Registration statement

```sql
create function skew as 'org.apache.iotdb.library.dprofile.UDAFSkew'
```

#### Usage

This function is used to calculate the population skewness.

**Name:** SKEW

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Output Series:** Output a single series. The type is DOUBLE. There is only one data point in the series, whose timestamp is 0 and value is the population skewness.

**Note:** Missing points, null points and `NaN` in the input series will be ignored.

#### Examples

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:00.000+08:00|            1.0|
|2020-01-01T00:00:01.000+08:00|            2.0|
|2020-01-01T00:00:02.000+08:00|            3.0|
|2020-01-01T00:00:03.000+08:00|            4.0|
|2020-01-01T00:00:04.000+08:00|            5.0|
|2020-01-01T00:00:05.000+08:00|            6.0|
|2020-01-01T00:00:06.000+08:00|            7.0|
|2020-01-01T00:00:07.000+08:00|            8.0|
|2020-01-01T00:00:08.000+08:00|            9.0|
|2020-01-01T00:00:09.000+08:00|           10.0|
|2020-01-01T00:00:10.000+08:00|           10.0|
|2020-01-01T00:00:11.000+08:00|           10.0|
|2020-01-01T00:00:12.000+08:00|           10.0|
|2020-01-01T00:00:13.000+08:00|           10.0|
|2020-01-01T00:00:14.000+08:00|           10.0|
|2020-01-01T00:00:15.000+08:00|           10.0|
|2020-01-01T00:00:16.000+08:00|           10.0|
|2020-01-01T00:00:17.000+08:00|           10.0|
|2020-01-01T00:00:18.000+08:00|           10.0|
|2020-01-01T00:00:19.000+08:00|           10.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select skew(s1) from root.test.d1
```

Output series:

```
+-----------------------------+-----------------------+
|                         Time|  skew(root.test.d1.s1)|
+-----------------------------+-----------------------+
|1970-01-01T08:00:00.000+08:00|    -0.9998427402292644|
+-----------------------------+-----------------------+
```

### Spline

#### Registration statement

```sql
create function spline as 'org.apache.iotdb.library.dprofile.UDTFSpline'
```

#### Usage

This function is used to calculate cubic spline interpolation of input series.

**Name:** SPLINE

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

+ `points`: Number of resampling points.

**Output Series:** Output a single series. The type is DOUBLE.

**Note**: Output series retains the first and last timestamps of input series. Interpolation points are selected at equal intervals. The function tries to calculate only when there are no less than 4 points in input series.

#### Examples

##### Assigning number of interpolation points

Input series:

```
+-----------------------------+------------+
|                         Time|root.test.s1|
+-----------------------------+------------+
|1970-01-01T08:00:00.000+08:00|         0.0|
|1970-01-01T08:00:00.300+08:00|         1.2|
|1970-01-01T08:00:00.500+08:00|         1.7|
|1970-01-01T08:00:00.700+08:00|         2.0|
|1970-01-01T08:00:00.900+08:00|         2.1|
|1970-01-01T08:00:01.100+08:00|         2.0|
|1970-01-01T08:00:01.200+08:00|         1.8|
|1970-01-01T08:00:01.300+08:00|         1.2|
|1970-01-01T08:00:01.400+08:00|         1.0|
|1970-01-01T08:00:01.500+08:00|         1.6|
+-----------------------------+------------+
```

SQL for query:

```sql
select spline(s1, "points"="151") from root.test
```

Output series:

```
+-----------------------------+------------------------------------+
|                         Time|spline(root.test.s1, "points"="151")|
+-----------------------------+------------------------------------+
|1970-01-01T08:00:00.000+08:00|                                 0.0|
|1970-01-01T08:00:00.010+08:00|                 0.04870000251134237|
|1970-01-01T08:00:00.020+08:00|                 0.09680000495910646|
|1970-01-01T08:00:00.030+08:00|                 0.14430000734329226|
|1970-01-01T08:00:00.040+08:00|                 0.19120000966389972|
|1970-01-01T08:00:00.050+08:00|                 0.23750001192092896|
|1970-01-01T08:00:00.060+08:00|                  0.2832000141143799|
|1970-01-01T08:00:00.070+08:00|                 0.32830001624425253|
|1970-01-01T08:00:00.080+08:00|                  0.3728000183105469|
|1970-01-01T08:00:00.090+08:00|                   0.416700020313263|
|1970-01-01T08:00:00.100+08:00|                  0.4600000222524008|
|1970-01-01T08:00:00.110+08:00|                  0.5027000241279602|
|1970-01-01T08:00:00.120+08:00|                  0.5448000259399414|
|1970-01-01T08:00:00.130+08:00|                  0.5863000276883443|
|1970-01-01T08:00:00.140+08:00|                   0.627200029373169|
|1970-01-01T08:00:00.150+08:00|                  0.6675000309944153|
|1970-01-01T08:00:00.160+08:00|                  0.7072000325520833|
|1970-01-01T08:00:00.170+08:00|                  0.7463000340461731|
|1970-01-01T08:00:00.180+08:00|                  0.7848000354766846|
|1970-01-01T08:00:00.190+08:00|                  0.8227000368436178|
|1970-01-01T08:00:00.200+08:00|                  0.8600000381469728|
|1970-01-01T08:00:00.210+08:00|                  0.8967000393867494|
|1970-01-01T08:00:00.220+08:00|                  0.9328000405629477|
|1970-01-01T08:00:00.230+08:00|                  0.9683000416755676|
|1970-01-01T08:00:00.240+08:00|                  1.0032000427246095|
|1970-01-01T08:00:00.250+08:00|                   1.037500043710073|
|1970-01-01T08:00:00.260+08:00|                   1.071200044631958|
|1970-01-01T08:00:00.270+08:00|                  1.1043000454902647|
|1970-01-01T08:00:00.280+08:00|                  1.1368000462849934|
|1970-01-01T08:00:00.290+08:00|                  1.1687000470161437|
|1970-01-01T08:00:00.300+08:00|                  1.2000000476837158|
|1970-01-01T08:00:00.310+08:00|                  1.2307000483103594|
|1970-01-01T08:00:00.320+08:00|                  1.2608000489139557|
|1970-01-01T08:00:00.330+08:00|                  1.2903000494873524|
|1970-01-01T08:00:00.340+08:00|                  1.3192000500233967|
|1970-01-01T08:00:00.350+08:00|                  1.3475000505149364|
|1970-01-01T08:00:00.360+08:00|                  1.3752000509548186|
|1970-01-01T08:00:00.370+08:00|                   1.402300051335891|
|1970-01-01T08:00:00.380+08:00|                  1.4288000516510009|
|1970-01-01T08:00:00.390+08:00|                  1.4547000518929958|
|1970-01-01T08:00:00.400+08:00|                   1.480000052054723|
|1970-01-01T08:00:00.410+08:00|                  1.5047000521290301|
|1970-01-01T08:00:00.420+08:00|                  1.5288000521087646|
|1970-01-01T08:00:00.430+08:00|                  1.5523000519867738|
|1970-01-01T08:00:00.440+08:00|                   1.575200051755905|
|1970-01-01T08:00:00.450+08:00|                   1.597500051409006|
|1970-01-01T08:00:00.460+08:00|                   1.619200050938924|
|1970-01-01T08:00:00.470+08:00|                  1.6403000503385066|
|1970-01-01T08:00:00.480+08:00|                   1.660800049600601|
|1970-01-01T08:00:00.490+08:00|                   1.680700048718055|
|1970-01-01T08:00:00.500+08:00|                  1.7000000476837158|
|1970-01-01T08:00:00.510+08:00|                  1.7188475466453037|
|1970-01-01T08:00:00.520+08:00|                  1.7373800457262996|
|1970-01-01T08:00:00.530+08:00|                  1.7555825448831923|
|1970-01-01T08:00:00.540+08:00|                  1.7734400440724702|
|1970-01-01T08:00:00.550+08:00|                   1.790937543250622|
|1970-01-01T08:00:00.560+08:00|                  1.8080600423741364|
|1970-01-01T08:00:00.570+08:00|                  1.8247925413995016|
|1970-01-01T08:00:00.580+08:00|                  1.8411200402832066|
|1970-01-01T08:00:00.590+08:00|                  1.8570275389817397|
|1970-01-01T08:00:00.600+08:00|                  1.8725000374515897|
|1970-01-01T08:00:00.610+08:00|                  1.8875225356492449|
|1970-01-01T08:00:00.620+08:00|                   1.902080033531194|
|1970-01-01T08:00:00.630+08:00|                  1.9161575310539258|
|1970-01-01T08:00:00.640+08:00|                  1.9297400281739288|
|1970-01-01T08:00:00.650+08:00|                  1.9428125248476913|
|1970-01-01T08:00:00.660+08:00|                  1.9553600210317021|
|1970-01-01T08:00:00.670+08:00|                    1.96736751668245|
|1970-01-01T08:00:00.680+08:00|                  1.9788200117564232|
|1970-01-01T08:00:00.690+08:00|                  1.9897025062101101|
|1970-01-01T08:00:00.700+08:00|                                 2.0|
|1970-01-01T08:00:00.710+08:00|                  2.0097024933913334|
|1970-01-01T08:00:00.720+08:00|                  2.0188199867081615|
|1970-01-01T08:00:00.730+08:00|                   2.027367479995188|
|1970-01-01T08:00:00.740+08:00|                  2.0353599732971155|
|1970-01-01T08:00:00.750+08:00|                  2.0428124666586482|
|1970-01-01T08:00:00.760+08:00|                   2.049739960124489|
|1970-01-01T08:00:00.770+08:00|                   2.056157453739342|
|1970-01-01T08:00:00.780+08:00|                    2.06207994754791|
|1970-01-01T08:00:00.790+08:00|                   2.067522441594897|
|1970-01-01T08:00:00.800+08:00|                   2.072499935925006|
|1970-01-01T08:00:00.810+08:00|                    2.07702743058294|
|1970-01-01T08:00:00.820+08:00|                   2.081119925613404|
|1970-01-01T08:00:00.830+08:00|                     2.0847924210611|
|1970-01-01T08:00:00.840+08:00|                  2.0880599169707317|
|1970-01-01T08:00:00.850+08:00|                  2.0909374133870027|
|1970-01-01T08:00:00.860+08:00|                  2.0934399103546166|
|1970-01-01T08:00:00.870+08:00|                  2.0955824079182768|
|1970-01-01T08:00:00.880+08:00|                  2.0973799061226863|
|1970-01-01T08:00:00.890+08:00|                   2.098847405012549|
|1970-01-01T08:00:00.900+08:00|                  2.0999999046325684|
|1970-01-01T08:00:00.910+08:00|                  2.1005574051201332|
|1970-01-01T08:00:00.920+08:00|                  2.1002599065303778|
|1970-01-01T08:00:00.930+08:00|                  2.0991524087846245|
|1970-01-01T08:00:00.940+08:00|                  2.0972799118041947|
|1970-01-01T08:00:00.950+08:00|                  2.0946874155104105|
|1970-01-01T08:00:00.960+08:00|                  2.0914199198245944|
|1970-01-01T08:00:00.970+08:00|                  2.0875224246680673|
|1970-01-01T08:00:00.980+08:00|                   2.083039929962151|
|1970-01-01T08:00:00.990+08:00|                  2.0780174356281687|
|1970-01-01T08:00:01.000+08:00|                  2.0724999415874406|
|1970-01-01T08:00:01.010+08:00|                    2.06653244776129|
|1970-01-01T08:00:01.020+08:00|                   2.060159954071038|
|1970-01-01T08:00:01.030+08:00|                   2.053427460438006|
|1970-01-01T08:00:01.040+08:00|                   2.046379966783517|
|1970-01-01T08:00:01.050+08:00|                  2.0390624730288924|
|1970-01-01T08:00:01.060+08:00|                   2.031519979095454|
|1970-01-01T08:00:01.070+08:00|                  2.0237974849045237|
|1970-01-01T08:00:01.080+08:00|                   2.015939990377423|
|1970-01-01T08:00:01.090+08:00|                  2.0079924954354746|
|1970-01-01T08:00:01.100+08:00|                                 2.0|
|1970-01-01T08:00:01.110+08:00|                  1.9907018211101906|
|1970-01-01T08:00:01.120+08:00|                  1.9788509124245144|
|1970-01-01T08:00:01.130+08:00|                  1.9645127287932083|
|1970-01-01T08:00:01.140+08:00|                  1.9477527250665083|
|1970-01-01T08:00:01.150+08:00|                  1.9286363560946513|
|1970-01-01T08:00:01.160+08:00|                  1.9072290767278735|
|1970-01-01T08:00:01.170+08:00|                  1.8835963418164114|
|1970-01-01T08:00:01.180+08:00|                  1.8578036062105014|
|1970-01-01T08:00:01.190+08:00|                  1.8299163247603802|
|1970-01-01T08:00:01.200+08:00|                  1.7999999523162842|
|1970-01-01T08:00:01.210+08:00|                  1.7623635841923329|
|1970-01-01T08:00:01.220+08:00|                  1.7129696477516976|
|1970-01-01T08:00:01.230+08:00|                  1.6543635959181928|
|1970-01-01T08:00:01.240+08:00|                  1.5890908816156328|
|1970-01-01T08:00:01.250+08:00|                  1.5196969577678319|
|1970-01-01T08:00:01.260+08:00|                  1.4487272772986044|
|1970-01-01T08:00:01.270+08:00|                  1.3787272931317647|
|1970-01-01T08:00:01.280+08:00|                  1.3122424581911272|
|1970-01-01T08:00:01.290+08:00|                   1.251818225400506|
|1970-01-01T08:00:01.300+08:00|                  1.2000000476837158|
|1970-01-01T08:00:01.310+08:00|                  1.1548000470995912|
|1970-01-01T08:00:01.320+08:00|                  1.1130667107899999|
|1970-01-01T08:00:01.330+08:00|                  1.0756000393033045|
|1970-01-01T08:00:01.340+08:00|                   1.043200033187868|
|1970-01-01T08:00:01.350+08:00|                   1.016666692992053|
|1970-01-01T08:00:01.360+08:00|                  0.9968000192642223|
|1970-01-01T08:00:01.370+08:00|                  0.9844000125527389|
|1970-01-01T08:00:01.380+08:00|                  0.9802666734059655|
|1970-01-01T08:00:01.390+08:00|                  0.9852000023722649|
|1970-01-01T08:00:01.400+08:00|                                 1.0|
|1970-01-01T08:00:01.410+08:00|                   1.023999999165535|
|1970-01-01T08:00:01.420+08:00|                  1.0559999990463256|
|1970-01-01T08:00:01.430+08:00|                  1.0959999996423722|
|1970-01-01T08:00:01.440+08:00|                  1.1440000009536744|
|1970-01-01T08:00:01.450+08:00|                  1.2000000029802322|
|1970-01-01T08:00:01.460+08:00|                   1.264000005722046|
|1970-01-01T08:00:01.470+08:00|                  1.3360000091791153|
|1970-01-01T08:00:01.480+08:00|                  1.4160000133514405|
|1970-01-01T08:00:01.490+08:00|                  1.5040000182390214|
|1970-01-01T08:00:01.500+08:00|                   1.600000023841858|
+-----------------------------+------------------------------------+
```

### Spread

#### Registration statement

```sql
create function spread as 'org.apache.iotdb.library.dprofile.UDAFSpread'
```

#### Usage

This function is used to calculate the spread of time series, that is, the maximum value minus the minimum value.

**Name:** SPREAD

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Output Series:** Output a single series. The type is the same as the input. There is only one data point in the series, whose timestamp is 0 and value is the spread.

**Note:** Missing points, null points and `NaN` in the input series will be ignored.

#### Examples

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:02.000+08:00|          100.0|
|2020-01-01T00:00:03.000+08:00|          101.0|
|2020-01-01T00:00:04.000+08:00|          102.0|
|2020-01-01T00:00:06.000+08:00|          104.0|
|2020-01-01T00:00:08.000+08:00|          126.0|
|2020-01-01T00:00:10.000+08:00|          108.0|
|2020-01-01T00:00:14.000+08:00|          112.0|
|2020-01-01T00:00:15.000+08:00|          113.0|
|2020-01-01T00:00:16.000+08:00|          114.0|
|2020-01-01T00:00:18.000+08:00|          116.0|
|2020-01-01T00:00:20.000+08:00|          118.0|
|2020-01-01T00:00:22.000+08:00|          120.0|
|2020-01-01T00:00:26.000+08:00|          124.0|
|2020-01-01T00:00:28.000+08:00|          126.0|
|2020-01-01T00:00:30.000+08:00|            NaN|
+-----------------------------+---------------+
```

SQL for query:

```sql
select spread(s1) from root.test.d1 where time <= 2020-01-01 00:00:30
```

Output series:

```
+-----------------------------+-----------------------+
|                         Time|spread(root.test.d1.s1)|
+-----------------------------+-----------------------+
|1970-01-01T08:00:00.000+08:00|                   26.0|
+-----------------------------+-----------------------+
```


### ZScore

#### Registration statement

```sql
create function zscore as 'org.apache.iotdb.library.dprofile.UDTFZScore'
```

#### Usage

This function is used to standardize the input series with z-score.

**Name:** ZSCORE

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

+ `compute`: When set to "batch", anomaly test is conducted after importing all data points; when set to "stream", it is required to provide mean and standard deviation. The default method is "batch".
+ `avg`: Mean value when method is set to "stream".
+ `sd`: Standard deviation when method is set to "stream".

**Output Series:** Output a single series. The type is DOUBLE.

#### Examples

##### Batch computing

Input series:

```
+-----------------------------+------------+
|                         Time|root.test.s1|
+-----------------------------+------------+
|1970-01-01T08:00:00.100+08:00|         0.0|
|1970-01-01T08:00:00.200+08:00|         0.0|
|1970-01-01T08:00:00.300+08:00|         1.0|
|1970-01-01T08:00:00.400+08:00|        -1.0|
|1970-01-01T08:00:00.500+08:00|         0.0|
|1970-01-01T08:00:00.600+08:00|         0.0|
|1970-01-01T08:00:00.700+08:00|        -2.0|
|1970-01-01T08:00:00.800+08:00|         2.0|
|1970-01-01T08:00:00.900+08:00|         0.0|
|1970-01-01T08:00:01.000+08:00|         0.0|
|1970-01-01T08:00:01.100+08:00|         1.0|
|1970-01-01T08:00:01.200+08:00|        -1.0|
|1970-01-01T08:00:01.300+08:00|        -1.0|
|1970-01-01T08:00:01.400+08:00|         1.0|
|1970-01-01T08:00:01.500+08:00|         0.0|
|1970-01-01T08:00:01.600+08:00|         0.0|
|1970-01-01T08:00:01.700+08:00|        10.0|
|1970-01-01T08:00:01.800+08:00|         2.0|
|1970-01-01T08:00:01.900+08:00|        -2.0|
|1970-01-01T08:00:02.000+08:00|         0.0|
+-----------------------------+------------+
```

SQL for query:

```sql
select zscore(s1) from root.test
```

Output series:

```
+-----------------------------+--------------------+
|                         Time|zscore(root.test.s1)|
+-----------------------------+--------------------+
|1970-01-01T08:00:00.100+08:00|-0.20672455764868078|
|1970-01-01T08:00:00.200+08:00|-0.20672455764868078|
|1970-01-01T08:00:00.300+08:00| 0.20672455764868078|
|1970-01-01T08:00:00.400+08:00| -0.6201736729460423|
|1970-01-01T08:00:00.500+08:00|-0.20672455764868078|
|1970-01-01T08:00:00.600+08:00|-0.20672455764868078|
|1970-01-01T08:00:00.700+08:00|  -1.033622788243404|
|1970-01-01T08:00:00.800+08:00|  0.6201736729460423|
|1970-01-01T08:00:00.900+08:00|-0.20672455764868078|
|1970-01-01T08:00:01.000+08:00|-0.20672455764868078|
|1970-01-01T08:00:01.100+08:00| 0.20672455764868078|
|1970-01-01T08:00:01.200+08:00| -0.6201736729460423|
|1970-01-01T08:00:01.300+08:00| -0.6201736729460423|
|1970-01-01T08:00:01.400+08:00| 0.20672455764868078|
|1970-01-01T08:00:01.500+08:00|-0.20672455764868078|
|1970-01-01T08:00:01.600+08:00|-0.20672455764868078|
|1970-01-01T08:00:01.700+08:00|  3.9277665953249348|
|1970-01-01T08:00:01.800+08:00|  0.6201736729460423|
|1970-01-01T08:00:01.900+08:00|  -1.033622788243404|
|1970-01-01T08:00:02.000+08:00|-0.20672455764868078|
+-----------------------------+--------------------+
```
<!--

​    Licensed to the Apache Software Foundation (ASF) under one
​    or more contributor license agreements.  See the NOTICE file
​    distributed with this work for additional information
​    regarding copyright ownership.  The ASF licenses this file
​    to you under the Apache License, Version 2.0 (the
​    "License"); you may not use this file except in compliance
​    with the License.  You may obtain a copy of the License at
​    
​        http://www.apache.org/licenses/LICENSE-2.0
​    
​    Unless required by applicable law or agreed to in writing,
​    software distributed under the License is distributed on an
​    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
​    KIND, either express or implied.  See the License for the
​    specific language governing permissions and limitations
​    under the License.

-->

## Anomaly Detection

### IQR

#### Registration statement

```sql
create function iqr as 'org.apache.iotdb.library.anomaly.UDTFIQR'
```

#### Usage

This function is used to detect anomalies based on IQR. Points distributing beyond 1.5 times IQR are selected.

**Name:** IQR

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

+ `method`: When set to "batch", anomaly test is conducted after importing all data points; when set to "stream", it is required to provide upper and lower quantiles. The default method is "batch".
+ `q1`: The lower quantile when method is set to "stream".
+ `q3`: The upper quantile when method is set to "stream".

**Output Series:** Output a single series. The type is DOUBLE.

**Note:** $IQR=Q_3-Q_1$

#### Examples

##### Batch computing

Input series:

```
+-----------------------------+------------+
|                         Time|root.test.s1|
+-----------------------------+------------+
|1970-01-01T08:00:00.100+08:00|         0.0|
|1970-01-01T08:00:00.200+08:00|         0.0|
|1970-01-01T08:00:00.300+08:00|         1.0|
|1970-01-01T08:00:00.400+08:00|        -1.0|
|1970-01-01T08:00:00.500+08:00|         0.0|
|1970-01-01T08:00:00.600+08:00|         0.0|
|1970-01-01T08:00:00.700+08:00|        -2.0|
|1970-01-01T08:00:00.800+08:00|         2.0|
|1970-01-01T08:00:00.900+08:00|         0.0|
|1970-01-01T08:00:01.000+08:00|         0.0|
|1970-01-01T08:00:01.100+08:00|         1.0|
|1970-01-01T08:00:01.200+08:00|        -1.0|
|1970-01-01T08:00:01.300+08:00|        -1.0|
|1970-01-01T08:00:01.400+08:00|         1.0|
|1970-01-01T08:00:01.500+08:00|         0.0|
|1970-01-01T08:00:01.600+08:00|         0.0|
|1970-01-01T08:00:01.700+08:00|        10.0|
|1970-01-01T08:00:01.800+08:00|         2.0|
|1970-01-01T08:00:01.900+08:00|        -2.0|
|1970-01-01T08:00:02.000+08:00|         0.0|
+-----------------------------+------------+
```

SQL for query:

```sql
select iqr(s1) from root.test
```

Output series:

```
+-----------------------------+-----------------+
|                         Time|iqr(root.test.s1)|
+-----------------------------+-----------------+
|1970-01-01T08:00:01.700+08:00|             10.0|
+-----------------------------+-----------------+
```

### KSigma

#### Registration statement

```sql
create function ksigma as 'org.apache.iotdb.library.anomaly.UDTFKSigma'
```

#### Usage

This function is used to detect anomalies based on the Dynamic K-Sigma Algorithm.
Within a sliding window, the input value with a deviation of more than k times the standard deviation from the average will be output as anomaly.

**Name:** KSIGMA

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

+ `k`: How many times to multiply on standard deviation to define anomaly, the default value is 3.
+ `window`: The window size of Dynamic K-Sigma Algorithm, the default value is 10000.

**Output Series:** Output a single series. The type is same as input series.

**Note:** Only when is larger than 0, the anomaly detection will be performed. Otherwise, nothing will be output.

#### Examples

##### Assigning k

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:02.000+08:00|            0.0|
|2020-01-01T00:00:03.000+08:00|           50.0|
|2020-01-01T00:00:04.000+08:00|          100.0|
|2020-01-01T00:00:06.000+08:00|          150.0|
|2020-01-01T00:00:08.000+08:00|          200.0|
|2020-01-01T00:00:10.000+08:00|          200.0|
|2020-01-01T00:00:14.000+08:00|          200.0|
|2020-01-01T00:00:15.000+08:00|          200.0|
|2020-01-01T00:00:16.000+08:00|          200.0|
|2020-01-01T00:00:18.000+08:00|          200.0|
|2020-01-01T00:00:20.000+08:00|          150.0|
|2020-01-01T00:00:22.000+08:00|          100.0|
|2020-01-01T00:00:26.000+08:00|           50.0|
|2020-01-01T00:00:28.000+08:00|            0.0|
|2020-01-01T00:00:30.000+08:00|            NaN|
+-----------------------------+---------------+
```

SQL for query:

```sql
select ksigma(s1,"k"="1.0") from root.test.d1 where time <= 2020-01-01 00:00:30
```

Output series:

```
+-----------------------------+---------------------------------+
|Time                         |ksigma(root.test.d1.s1,"k"="3.0")|
+-----------------------------+---------------------------------+
|2020-01-01T00:00:02.000+08:00|                              0.0|
|2020-01-01T00:00:03.000+08:00|                             50.0|
|2020-01-01T00:00:26.000+08:00|                             50.0|
|2020-01-01T00:00:28.000+08:00|                              0.0|
+-----------------------------+---------------------------------+
```

### LOF

#### Registration statement

```sql
create function LOF as 'org.apache.iotdb.library.anomaly.UDTFLOF'
```

#### Usage

This function is used to detect density anomaly of time series. According to k-th distance calculation parameter and local outlier factor (lof) threshold, the function judges if a set of input values is an density anomaly, and a bool mark of anomaly values will be output.

**Name:** LOF

**Input Series:** Multiple input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

+ `method`:assign a detection method. The default value is "default", when input data has multiple dimensions. The alternative is "series", when a input series will be transformed to high dimension.
+ `k`:use the k-th distance to calculate lof. Default value is 3.
+ `window`: size of window to split origin data points. Default value is 10000.
+ `windowsize`:dimension that will be transformed into when method is "series".  The default value is 5.

**Output Series:** Output a single series. The type is DOUBLE.

**Note:** Incomplete rows will be ignored. They are neither calculated nor marked as anomaly.

#### Examples

##### Using default parameters

Input series:

```
+-----------------------------+---------------+---------------+
|                         Time|root.test.d1.s1|root.test.d1.s2|
+-----------------------------+---------------+---------------+
|1970-01-01T08:00:00.100+08:00|            0.0|            0.0|
|1970-01-01T08:00:00.200+08:00|            0.0|            1.0|
|1970-01-01T08:00:00.300+08:00|            1.0|            1.0|
|1970-01-01T08:00:00.400+08:00|            1.0|            0.0|
|1970-01-01T08:00:00.500+08:00|            0.0|           -1.0|
|1970-01-01T08:00:00.600+08:00|           -1.0|           -1.0|
|1970-01-01T08:00:00.700+08:00|           -1.0|            0.0|
|1970-01-01T08:00:00.800+08:00|            2.0|            2.0|
|1970-01-01T08:00:00.900+08:00|            0.0|           null|
+-----------------------------+---------------+---------------+
```

SQL for query:

```sql
select lof(s1,s2) from root.test.d1 where time<1000
```

Output series:

```
+-----------------------------+-------------------------------------+
|                         Time|lof(root.test.d1.s1, root.test.d1.s2)|
+-----------------------------+-------------------------------------+
|1970-01-01T08:00:00.100+08:00|                   3.8274824267668244|
|1970-01-01T08:00:00.200+08:00|                   3.0117631741126156|
|1970-01-01T08:00:00.300+08:00|                    2.838155437762879|
|1970-01-01T08:00:00.400+08:00|                   3.0117631741126156|
|1970-01-01T08:00:00.500+08:00|                     2.73518261244453|
|1970-01-01T08:00:00.600+08:00|                    2.371440975708148|
|1970-01-01T08:00:00.700+08:00|                     2.73518261244453|
|1970-01-01T08:00:00.800+08:00|                   1.7561416374270742|
+-----------------------------+-------------------------------------+
```

##### Diagnosing 1d  timeseries

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|1970-01-01T08:00:00.100+08:00|            1.0|
|1970-01-01T08:00:00.200+08:00|            2.0|
|1970-01-01T08:00:00.300+08:00|            3.0|
|1970-01-01T08:00:00.400+08:00|            4.0|
|1970-01-01T08:00:00.500+08:00|            5.0|
|1970-01-01T08:00:00.600+08:00|            6.0|
|1970-01-01T08:00:00.700+08:00|            7.0|
|1970-01-01T08:00:00.800+08:00|            8.0|
|1970-01-01T08:00:00.900+08:00|            9.0|
|1970-01-01T08:00:01.000+08:00|           10.0|
|1970-01-01T08:00:01.100+08:00|           11.0|
|1970-01-01T08:00:01.200+08:00|           12.0|
|1970-01-01T08:00:01.300+08:00|           13.0|
|1970-01-01T08:00:01.400+08:00|           14.0|
|1970-01-01T08:00:01.500+08:00|           15.0|
|1970-01-01T08:00:01.600+08:00|           16.0|
|1970-01-01T08:00:01.700+08:00|           17.0|
|1970-01-01T08:00:01.800+08:00|           18.0|
|1970-01-01T08:00:01.900+08:00|           19.0|
|1970-01-01T08:00:02.000+08:00|           20.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select lof(s1, "method"="series") from root.test.d1 where time<1000
```

Output series:

```
+-----------------------------+--------------------+
|                         Time|lof(root.test.d1.s1)|
+-----------------------------+--------------------+
|1970-01-01T08:00:00.100+08:00|    3.77777777777778|
|1970-01-01T08:00:00.200+08:00|    4.32727272727273|
|1970-01-01T08:00:00.300+08:00|    4.85714285714286|
|1970-01-01T08:00:00.400+08:00|    5.40909090909091|
|1970-01-01T08:00:00.500+08:00|    5.94999999999999|
|1970-01-01T08:00:00.600+08:00|    6.43243243243243|
|1970-01-01T08:00:00.700+08:00|    6.79999999999999|
|1970-01-01T08:00:00.800+08:00|                 7.0|
|1970-01-01T08:00:00.900+08:00|                 7.0|
|1970-01-01T08:00:01.000+08:00|    6.79999999999999|
|1970-01-01T08:00:01.100+08:00|    6.43243243243243|
|1970-01-01T08:00:01.200+08:00|    5.94999999999999|
|1970-01-01T08:00:01.300+08:00|    5.40909090909091|
|1970-01-01T08:00:01.400+08:00|    4.85714285714286|
|1970-01-01T08:00:01.500+08:00|    4.32727272727273|
|1970-01-01T08:00:01.600+08:00|    3.77777777777778|
+-----------------------------+--------------------+
```

### MissDetect

#### Registration statement

```sql
create function missdetect as 'org.apache.iotdb.library.anomaly.UDTFMissDetect'
```

#### Usage

This function is used to detect missing anomalies.
In some datasets, missing values are filled by linear interpolation.
Thus, there are several long perfect linear segments.
By discovering these perfect linear segments,
missing anomalies are detected.

**Name:** MISSDETECT

**Input Series:** Only support a single input series. The data type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameter:**

`error`: The minimum length of the detected missing anomalies, which is an integer greater than or equal to 10. By default, it is 10.

**Output Series:** Output a single series. The type is BOOLEAN. Each data point which is miss anomaly will be labeled as true.

#### Examples

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d2.s2|
+-----------------------------+---------------+
|2021-07-01T12:00:00.000+08:00|            0.0|
|2021-07-01T12:00:01.000+08:00|            1.0|
|2021-07-01T12:00:02.000+08:00|            0.0|
|2021-07-01T12:00:03.000+08:00|            1.0|
|2021-07-01T12:00:04.000+08:00|            0.0|
|2021-07-01T12:00:05.000+08:00|            0.0|
|2021-07-01T12:00:06.000+08:00|            0.0|
|2021-07-01T12:00:07.000+08:00|            0.0|
|2021-07-01T12:00:08.000+08:00|            0.0|
|2021-07-01T12:00:09.000+08:00|            0.0|
|2021-07-01T12:00:10.000+08:00|            0.0|
|2021-07-01T12:00:11.000+08:00|            0.0|
|2021-07-01T12:00:12.000+08:00|            0.0|
|2021-07-01T12:00:13.000+08:00|            0.0|
|2021-07-01T12:00:14.000+08:00|            0.0|
|2021-07-01T12:00:15.000+08:00|            0.0|
|2021-07-01T12:00:16.000+08:00|            1.0|
|2021-07-01T12:00:17.000+08:00|            0.0|
|2021-07-01T12:00:18.000+08:00|            1.0|
|2021-07-01T12:00:19.000+08:00|            0.0|
|2021-07-01T12:00:20.000+08:00|            1.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select missdetect(s2,'minlen'='10') from root.test.d2
```

Output series:

```
+-----------------------------+------------------------------------------+
|                         Time|missdetect(root.test.d2.s2, "minlen"="10")|
+-----------------------------+------------------------------------------+
|2021-07-01T12:00:00.000+08:00|                                     false|
|2021-07-01T12:00:01.000+08:00|                                     false|
|2021-07-01T12:00:02.000+08:00|                                     false|
|2021-07-01T12:00:03.000+08:00|                                     false|
|2021-07-01T12:00:04.000+08:00|                                      true|
|2021-07-01T12:00:05.000+08:00|                                      true|
|2021-07-01T12:00:06.000+08:00|                                      true|
|2021-07-01T12:00:07.000+08:00|                                      true|
|2021-07-01T12:00:08.000+08:00|                                      true|
|2021-07-01T12:00:09.000+08:00|                                      true|
|2021-07-01T12:00:10.000+08:00|                                      true|
|2021-07-01T12:00:11.000+08:00|                                      true|
|2021-07-01T12:00:12.000+08:00|                                      true|
|2021-07-01T12:00:13.000+08:00|                                      true|
|2021-07-01T12:00:14.000+08:00|                                      true|
|2021-07-01T12:00:15.000+08:00|                                      true|
|2021-07-01T12:00:16.000+08:00|                                     false|
|2021-07-01T12:00:17.000+08:00|                                     false|
|2021-07-01T12:00:18.000+08:00|                                     false|
|2021-07-01T12:00:19.000+08:00|                                     false|
|2021-07-01T12:00:20.000+08:00|                                     false|
+-----------------------------+------------------------------------------+
```

### Range

#### Registration statement

```sql
create function range as 'org.apache.iotdb.library.anomaly.UDTFRange'
```

#### Usage

This function is used to detect range anomaly of time series. According to upper bound and lower bound parameters, the function judges if a input value is beyond range, aka range anomaly, and a new time series of anomaly will be output.

**Name:** RANGE

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

+ `lower_bound`:lower bound of range anomaly detection.
+ `upper_bound`:upper bound of range anomaly detection.

**Output Series:** Output a single series. The type is the same as the input.

**Note:** Only when `upper_bound` is larger than `lower_bound`, the anomaly detection will be performed. Otherwise, nothing will be output.


#### Examples

##### Assigning Lower and Upper Bound

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:02.000+08:00|          100.0|
|2020-01-01T00:00:03.000+08:00|          101.0|
|2020-01-01T00:00:04.000+08:00|          102.0|
|2020-01-01T00:00:06.000+08:00|          104.0|
|2020-01-01T00:00:08.000+08:00|          126.0|
|2020-01-01T00:00:10.000+08:00|          108.0|
|2020-01-01T00:00:14.000+08:00|          112.0|
|2020-01-01T00:00:15.000+08:00|          113.0|
|2020-01-01T00:00:16.000+08:00|          114.0|
|2020-01-01T00:00:18.000+08:00|          116.0|
|2020-01-01T00:00:20.000+08:00|          118.0|
|2020-01-01T00:00:22.000+08:00|          120.0|
|2020-01-01T00:00:26.000+08:00|          124.0|
|2020-01-01T00:00:28.000+08:00|          126.0|
|2020-01-01T00:00:30.000+08:00|            NaN|
+-----------------------------+---------------+
```

SQL for query:

```sql
select range(s1,"lower_bound"="101.0","upper_bound"="125.0") from root.test.d1 where time <= 2020-01-01 00:00:30
```

Output series:

```
+-----------------------------+------------------------------------------------------------------+
|Time                         |range(root.test.d1.s1,"lower_bound"="101.0","upper_bound"="125.0")|
+-----------------------------+------------------------------------------------------------------+
|2020-01-01T00:00:02.000+08:00|                                                             100.0|
|2020-01-01T00:00:08.000+08:00|                                                             126.0|
|2020-01-01T00:00:28.000+08:00|                                                             126.0|
+-----------------------------+------------------------------------------------------------------+
```

### TwoSidedFilter

#### Registration statement

```sql
create function twosidedfilter as 'org.apache.iotdb.library.anomaly.UDTFTwoSidedFilter'
```

#### Usage

The function is used to filter anomalies of a numeric time series based on two-sided window detection.

**Name:** TWOSIDEDFILTER

**Input Series:** Only support a single input series. The data type is  INT32 / INT64 / FLOAT / DOUBLE

**Output Series:** Output a single series. The type is the same as the input. It is the input without anomalies.

**Parameter:**

- `len`: The size of the window, which is a positive integer. By default, it's 5. When `len`=3, the algorithm detects forward window and backward window with length 3 and calculates the outlierness of the current point.

- `threshold`: The threshold of outlierness, which is a floating number in (0,1). By default, it's 0.3. The strict standard of detecting anomalies is in proportion to the threshold.

#### Examples

Input series:

```
+-----------------------------+------------+
|                         Time|root.test.s0|
+-----------------------------+------------+
|1970-01-01T08:00:00.000+08:00|      2002.0|
|1970-01-01T08:00:01.000+08:00|      1946.0|
|1970-01-01T08:00:02.000+08:00|      1958.0|
|1970-01-01T08:00:03.000+08:00|      2012.0|
|1970-01-01T08:00:04.000+08:00|      2051.0|
|1970-01-01T08:00:05.000+08:00|      1898.0|
|1970-01-01T08:00:06.000+08:00|      2014.0|
|1970-01-01T08:00:07.000+08:00|      2052.0|
|1970-01-01T08:00:08.000+08:00|      1935.0|
|1970-01-01T08:00:09.000+08:00|      1901.0|
|1970-01-01T08:00:10.000+08:00|      1972.0|
|1970-01-01T08:00:11.000+08:00|      1969.0|
|1970-01-01T08:00:12.000+08:00|      1984.0|
|1970-01-01T08:00:13.000+08:00|      2018.0|
|1970-01-01T08:00:37.000+08:00|      1484.0|
|1970-01-01T08:00:38.000+08:00|      1055.0|
|1970-01-01T08:00:39.000+08:00|      1050.0|
|1970-01-01T08:01:05.000+08:00|      1023.0|
|1970-01-01T08:01:06.000+08:00|      1056.0|
|1970-01-01T08:01:07.000+08:00|       978.0|
|1970-01-01T08:01:08.000+08:00|      1050.0|
|1970-01-01T08:01:09.000+08:00|      1123.0|
|1970-01-01T08:01:10.000+08:00|      1150.0|
|1970-01-01T08:01:11.000+08:00|      1034.0|
|1970-01-01T08:01:12.000+08:00|       950.0|
|1970-01-01T08:01:13.000+08:00|      1059.0|
+-----------------------------+------------+
```

SQL for query:

```sql
select TwoSidedFilter(s0, 'len'='5', 'threshold'='0.3') from root.test
```

Output series:

```
+-----------------------------+------------+
|                         Time|root.test.s0|
+-----------------------------+------------+
|1970-01-01T08:00:00.000+08:00|      2002.0|
|1970-01-01T08:00:01.000+08:00|      1946.0|
|1970-01-01T08:00:02.000+08:00|      1958.0|
|1970-01-01T08:00:03.000+08:00|      2012.0|
|1970-01-01T08:00:04.000+08:00|      2051.0|
|1970-01-01T08:00:05.000+08:00|      1898.0|
|1970-01-01T08:00:06.000+08:00|      2014.0|
|1970-01-01T08:00:07.000+08:00|      2052.0|
|1970-01-01T08:00:08.000+08:00|      1935.0|
|1970-01-01T08:00:09.000+08:00|      1901.0|
|1970-01-01T08:00:10.000+08:00|      1972.0|
|1970-01-01T08:00:11.000+08:00|      1969.0|
|1970-01-01T08:00:12.000+08:00|      1984.0|
|1970-01-01T08:00:13.000+08:00|      2018.0|
|1970-01-01T08:01:05.000+08:00|      1023.0|
|1970-01-01T08:01:06.000+08:00|      1056.0|
|1970-01-01T08:01:07.000+08:00|       978.0|
|1970-01-01T08:01:08.000+08:00|      1050.0|
|1970-01-01T08:01:09.000+08:00|      1123.0|
|1970-01-01T08:01:10.000+08:00|      1150.0|
|1970-01-01T08:01:11.000+08:00|      1034.0|
|1970-01-01T08:01:12.000+08:00|       950.0|
|1970-01-01T08:01:13.000+08:00|      1059.0|
+-----------------------------+------------+
```

### Outlier

#### Registration statement

```sql
create function outlier as 'org.apache.iotdb.library.anomaly.UDTFOutlier'
```

#### Usage

This function is used to detect distance-based outliers. For each point in the current window, if the number of its neighbors within the distance of neighbor distance threshold is less than the neighbor count threshold, the point in detected as an outlier.

**Name:** OUTLIER

**Input Series：** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

+ `r`：the neighbor distance threshold.
+ `k`：the neighbor count threshold.
+ `w`：the window size.
+ `s`：the slide size.

**Output Series:** Output a single series. The type is the same as the input.

#### Examples

##### Assigning Parameters of Queries

Input series:

```
+-----------------------------+------------+
|                         Time|root.test.s1|
+-----------------------------+------------+
|2020-01-04T23:59:55.000+08:00|        56.0|
|2020-01-04T23:59:56.000+08:00|        55.1|
|2020-01-04T23:59:57.000+08:00|        54.2|
|2020-01-04T23:59:58.000+08:00|        56.3|
|2020-01-04T23:59:59.000+08:00|        59.0|
|2020-01-05T00:00:00.000+08:00|        60.0|
|2020-01-05T00:00:01.000+08:00|        60.5|
|2020-01-05T00:00:02.000+08:00|        64.5|
|2020-01-05T00:00:03.000+08:00|        69.0|
|2020-01-05T00:00:04.000+08:00|        64.2|
|2020-01-05T00:00:05.000+08:00|        62.3|
|2020-01-05T00:00:06.000+08:00|        58.0|
|2020-01-05T00:00:07.000+08:00|        58.9|
|2020-01-05T00:00:08.000+08:00|        52.0|
|2020-01-05T00:00:09.000+08:00|        62.3|
|2020-01-05T00:00:10.000+08:00|        61.0|
|2020-01-05T00:00:11.000+08:00|        64.2|
|2020-01-05T00:00:12.000+08:00|        61.8|
|2020-01-05T00:00:13.000+08:00|        64.0|
|2020-01-05T00:00:14.000+08:00|        63.0|
+-----------------------------+------------+
```

SQL for query:

```sql
select outlier(s1,"r"="5.0","k"="4","w"="10","s"="5") from root.test
```

Output series:

```
+-----------------------------+--------------------------------------------------------+
|                         Time|outlier(root.test.s1,"r"="5.0","k"="4","w"="10","s"="5")|
+-----------------------------+--------------------------------------------------------+
|2020-01-05T00:00:03.000+08:00|                                                    69.0|
+-----------------------------+--------------------------------------------------------+
|2020-01-05T00:00:08.000+08:00|                                                    52.0|
+-----------------------------+--------------------------------------------------------+
```

## Frequency Domain Analysis

### Conv

#### Registration statement

```sql
create function conv as 'org.apache.iotdb.library.frequency.UDTFConv'
```

#### Usage

This function is used to calculate the convolution, i.e. polynomial multiplication.

**Name:** CONV

**Input:** Only support two input series. The types are both INT32 / INT64 / FLOAT / DOUBLE.

**Output:** Output a single series. The type is DOUBLE. It is the result of convolution whose timestamps starting from 0 only indicate the order.

**Note:** `NaN` in the input series will be ignored.

#### Examples

Input series:

```
+-----------------------------+---------------+---------------+
|                         Time|root.test.d2.s1|root.test.d2.s2|
+-----------------------------+---------------+---------------+
|1970-01-01T08:00:00.000+08:00|            1.0|            7.0|
|1970-01-01T08:00:00.001+08:00|            0.0|            2.0|
|1970-01-01T08:00:00.002+08:00|            1.0|           null|
+-----------------------------+---------------+---------------+
```

SQL for query:

```sql
select conv(s1,s2) from root.test.d2
```

Output series:

```
+-----------------------------+--------------------------------------+
|                         Time|conv(root.test.d2.s1, root.test.d2.s2)|
+-----------------------------+--------------------------------------+
|1970-01-01T08:00:00.000+08:00|                                   7.0|
|1970-01-01T08:00:00.001+08:00|                                   2.0|
|1970-01-01T08:00:00.002+08:00|                                   7.0|
|1970-01-01T08:00:00.003+08:00|                                   2.0|
+-----------------------------+--------------------------------------+
```

### Deconv

#### Registration statement

```sql
create function deconv as 'org.apache.iotdb.library.frequency.UDTFDeconv'
```

#### Usage

This function is used to calculate the deconvolution, i.e. polynomial division.

**Name:** DECONV

**Input:** Only support two input series. The types are both INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `result`: The result of deconvolution, which is 'quotient' or 'remainder'. By default, the quotient will be output.

**Output:** Output a single series. The type is DOUBLE. It is the result of deconvolving the second series from the first series (dividing the first series by the second series) whose timestamps starting from 0 only indicate the order.

**Note:** `NaN` in the input series will be ignored.

#### Examples


##### Calculate the quotient

When `result` is 'quotient' or the default, this function calculates the quotient of the deconvolution.

Input series:

```
+-----------------------------+---------------+---------------+
|                         Time|root.test.d2.s3|root.test.d2.s2|
+-----------------------------+---------------+---------------+
|1970-01-01T08:00:00.000+08:00|            8.0|            7.0|
|1970-01-01T08:00:00.001+08:00|            2.0|            2.0|
|1970-01-01T08:00:00.002+08:00|            7.0|           null|
|1970-01-01T08:00:00.003+08:00|            2.0|           null|
+-----------------------------+---------------+---------------+
```

SQL for query:

```sql
select deconv(s3,s2) from root.test.d2
```

Output series:

```
+-----------------------------+----------------------------------------+
|                         Time|deconv(root.test.d2.s3, root.test.d2.s2)|
+-----------------------------+----------------------------------------+
|1970-01-01T08:00:00.000+08:00|                                     1.0|
|1970-01-01T08:00:00.001+08:00|                                     0.0|
|1970-01-01T08:00:00.002+08:00|                                     1.0|
+-----------------------------+----------------------------------------+
```

##### Calculate the remainder

When `result` is 'remainder', this function calculates the remainder of the deconvolution.

Input series is the same as above, the SQL for query is shown below:


```sql
select deconv(s3,s2,'result'='remainder') from root.test.d2
```

Output series:

```
+-----------------------------+--------------------------------------------------------------+
|                         Time|deconv(root.test.d2.s3, root.test.d2.s2, "result"="remainder")|
+-----------------------------+--------------------------------------------------------------+
|1970-01-01T08:00:00.000+08:00|                                                           1.0|
|1970-01-01T08:00:00.001+08:00|                                                           0.0|
|1970-01-01T08:00:00.002+08:00|                                                           0.0|
|1970-01-01T08:00:00.003+08:00|                                                           0.0|
+-----------------------------+--------------------------------------------------------------+
```

### DWT

#### Registration statement

```sql
create function dwt as 'org.apache.iotdb.library.frequency.UDTFDWT'
```

#### Usage

This function is used to calculate 1d discrete wavelet transform of a numerical series.

**Name:** DWT

**Input:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `method`: The type of wavelet. May select 'Haar', 'DB4', 'DB6', 'DB8', where DB means Daubechies. User may offer coefficients of wavelet transform and ignore this parameter. Case ignored.
+ `coef`: Coefficients of wavelet transform. When providing this parameter, use comma ',' to split them, and leave no spaces or other punctuations.
+ `layer`: Times to transform. The number of output vectors equals $layer+1$. Default is 1.

**Output:** Output a single series. The type is DOUBLE. The length is the same as the input.

**Note:** The length of input series must be an integer number power of 2.

#### Examples


##### Haar wavelet transform

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|1970-01-01T08:00:00.000+08:00|            0.0|
|1970-01-01T08:00:00.100+08:00|            0.2|
|1970-01-01T08:00:00.200+08:00|            1.5|
|1970-01-01T08:00:00.300+08:00|            1.2|
|1970-01-01T08:00:00.400+08:00|            0.6|
|1970-01-01T08:00:00.500+08:00|            1.7|
|1970-01-01T08:00:00.600+08:00|            0.8|
|1970-01-01T08:00:00.700+08:00|            2.0|
|1970-01-01T08:00:00.800+08:00|            2.5|
|1970-01-01T08:00:00.900+08:00|            2.1|
|1970-01-01T08:00:01.000+08:00|            0.0|
|1970-01-01T08:00:01.100+08:00|            2.0|
|1970-01-01T08:00:01.200+08:00|            1.8|
|1970-01-01T08:00:01.300+08:00|            1.2|
|1970-01-01T08:00:01.400+08:00|            1.0|
|1970-01-01T08:00:01.500+08:00|            1.6|
+-----------------------------+---------------+
```

SQL for query:

```sql
select dwt(s1,"method"="haar") from root.test.d1
```

Output series:

```
+-----------------------------+-------------------------------------+
|                         Time|dwt(root.test.d1.s1, "method"="haar")|
+-----------------------------+-------------------------------------+
|1970-01-01T08:00:00.000+08:00|                  0.14142135834465192|
|1970-01-01T08:00:00.100+08:00|                    1.909188342921157|
|1970-01-01T08:00:00.200+08:00|                   1.6263456473052773|
|1970-01-01T08:00:00.300+08:00|                   1.9798989957517026|
|1970-01-01T08:00:00.400+08:00|                    3.252691126023161|
|1970-01-01T08:00:00.500+08:00|                    1.414213562373095|
|1970-01-01T08:00:00.600+08:00|                   2.1213203435596424|
|1970-01-01T08:00:00.700+08:00|                   1.8384776479437628|
|1970-01-01T08:00:00.800+08:00|                 -0.14142135834465192|
|1970-01-01T08:00:00.900+08:00|                  0.21213200063848547|
|1970-01-01T08:00:01.000+08:00|                  -0.7778174761639416|
|1970-01-01T08:00:01.100+08:00|                  -0.8485281289944873|
|1970-01-01T08:00:01.200+08:00|                   0.2828427799095765|
|1970-01-01T08:00:01.300+08:00|                   -1.414213562373095|
|1970-01-01T08:00:01.400+08:00|                  0.42426400127697095|
|1970-01-01T08:00:01.500+08:00|                 -0.42426408557066786|
+-----------------------------+-------------------------------------+
```


### IDWT

#### Registration statement

```sql
create function dwt as 'org.apache.iotdb.library.frequency.UDTFIDWT'
```

#### Usage

This function performs one-dimensional inverse discrete wavelet transform on the input series, reconstructing the original data from DWT decomposed wavelet coefficients.

**Name:** IDWT

**Input:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `method`: The type of wavelet. May select 'Haar', 'DB4', 'DB6', 'DB8', where DB means Daubechies. User may offer coefficients of wavelet transform and ignore this parameter. Case ignored.
+ `coef`: Coefficients of wavelet transform. When providing this parameter, use comma ',' to split them, and leave no spaces or other punctuations.
+ `layer`: Times to transform. The number of output vectors equals $layer+1$. Default is 1.

**Output:** Output a single series. The type is DOUBLE. The length is the same as the input.

**Note:**
* The length of input series must be an integer number power of 2.
* The parameter settings of the IDWT function (method/coef/layer) should be consistent with the corresponding DWT transformation to correctly reconstruct the original data.
* Typically, the input of IDWT is the output result of the DWT function.

#### Examples

##### Haar wavelet transform

Input series:

```
+-----------------------------+--------------------+
|                         Time|     root.test.d1.s2|
+-----------------------------+--------------------+
|1970-01-01T08:00:00.000+08:00|  0.1414213562373095|
|1970-01-01T08:00:00.100+08:00|   1.909188309203678|
|1970-01-01T08:00:00.200+08:00|  1.6263455967290592|
|1970-01-01T08:00:00.300+08:00|   1.979898987322333|
|1970-01-01T08:00:00.400+08:00|  3.2526911934581184|
|1970-01-01T08:00:00.500+08:00|   1.414213562373095|
|1970-01-01T08:00:00.600+08:00|  2.1213203435596424|
|1970-01-01T08:00:00.700+08:00|  1.8384776310850235|
|1970-01-01T08:00:00.800+08:00| -0.1414213562373095|
|1970-01-01T08:00:00.900+08:00| 0.21213203435596428|
|1970-01-01T08:00:01.000+08:00| -0.7778174593052022|
|1970-01-01T08:00:01.100+08:00| -0.8485281374238569|
|1970-01-01T08:00:01.200+08:00|  0.2828427124746189|
|1970-01-01T08:00:01.300+08:00|  -1.414213562373095|
|1970-01-01T08:00:01.400+08:00| 0.42426406871192857|
|1970-01-01T08:00:01.500+08:00|-0.42426406871192857|
+-----------------------------+--------------------+
```

SQL for query:

```sql
select idwt(s2,"method"="haar") from root.test.d1
```

Output series:

```
+-----------------------------+--------------------------------------+
|                         Time|idwt(root.test.d1.s2, "method"="haar")|
+-----------------------------+--------------------------------------+
|1970-01-01T08:00:00.000+08:00|                                   0.0|
|1970-01-01T08:00:00.100+08:00|                   0.19999999999999998|
|1970-01-01T08:00:00.200+08:00|                    1.4999999999999996|
|1970-01-01T08:00:00.300+08:00|                    1.1999999999999997|
|1970-01-01T08:00:00.400+08:00|                                   0.6|
|1970-01-01T08:00:00.500+08:00|                    1.6999999999999997|
|1970-01-01T08:00:00.600+08:00|                    0.7999999999999998|
|1970-01-01T08:00:00.700+08:00|                    1.9999999999999996|
|1970-01-01T08:00:00.800+08:00|                    2.4999999999999996|
|1970-01-01T08:00:00.900+08:00|                                   2.1|
|1970-01-01T08:00:01.000+08:00|                                   0.0|
|1970-01-01T08:00:01.100+08:00|                    1.9999999999999996|
|1970-01-01T08:00:01.200+08:00|                    1.7999999999999998|
|1970-01-01T08:00:01.300+08:00|                    1.1999999999999997|
|1970-01-01T08:00:01.400+08:00|                    0.9999999999999998|
|1970-01-01T08:00:01.500+08:00|                    1.5999999999999999|
+-----------------------------+--------------------------------------+
```


### FFT

#### Registration statement

```sql
create function fft as 'org.apache.iotdb.library.frequency.UDTFFFT'
```

#### Usage

This function is used to calculate the fast Fourier transform (FFT) of a numerical series.

**Name:** FFT

**Input:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `method`: The type of FFT, which is 'uniform' (by default) or 'nonuniform'. If the value is 'uniform', the timestamps will be ignored and all data points will be regarded as equidistant. Thus, the equidistant fast Fourier transform algorithm will be applied. If the value is 'nonuniform' (TODO), the non-equidistant fast Fourier transform algorithm will be applied based on timestamps.
+ `result`: The result of FFT, which is 'real', 'imag', 'abs' or 'angle', corresponding to the real part, imaginary part, magnitude and phase angle. By default, the magnitude will be output.
+ `compress`: The parameter of compression, which is within (0,1]. It is the reserved energy ratio of lossy compression. By default, there is no compression.


**Output:** Output a single series. The type is DOUBLE. The length is the same as the input. The timestamps starting from 0 only indicate the order.

**Note:** `NaN` in the input series will be ignored.

#### Examples


##### Uniform FFT

With the default `type`, uniform FFT is applied.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|1970-01-01T08:00:00.000+08:00|       2.902113|
|1970-01-01T08:00:01.000+08:00|      1.1755705|
|1970-01-01T08:00:02.000+08:00|     -2.1755705|
|1970-01-01T08:00:03.000+08:00|     -1.9021131|
|1970-01-01T08:00:04.000+08:00|            1.0|
|1970-01-01T08:00:05.000+08:00|      1.9021131|
|1970-01-01T08:00:06.000+08:00|      0.1755705|
|1970-01-01T08:00:07.000+08:00|     -1.1755705|
|1970-01-01T08:00:08.000+08:00|      -0.902113|
|1970-01-01T08:00:09.000+08:00|            0.0|
|1970-01-01T08:00:10.000+08:00|       0.902113|
|1970-01-01T08:00:11.000+08:00|      1.1755705|
|1970-01-01T08:00:12.000+08:00|     -0.1755705|
|1970-01-01T08:00:13.000+08:00|     -1.9021131|
|1970-01-01T08:00:14.000+08:00|           -1.0|
|1970-01-01T08:00:15.000+08:00|      1.9021131|
|1970-01-01T08:00:16.000+08:00|      2.1755705|
|1970-01-01T08:00:17.000+08:00|     -1.1755705|
|1970-01-01T08:00:18.000+08:00|      -2.902113|
|1970-01-01T08:00:19.000+08:00|            0.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select fft(s1) from root.test.d1
```

Output series:

```
+-----------------------------+----------------------+
|                         Time|  fft(root.test.d1.s1)|
+-----------------------------+----------------------+
|1970-01-01T08:00:00.000+08:00|                   0.0|
|1970-01-01T08:00:00.001+08:00| 1.2727111142703152E-8|
|1970-01-01T08:00:00.002+08:00|  2.385520799101839E-7|
|1970-01-01T08:00:00.003+08:00|  8.723291723972645E-8|
|1970-01-01T08:00:00.004+08:00|    19.999999960195904|
|1970-01-01T08:00:00.005+08:00|     9.999999850988388|
|1970-01-01T08:00:00.006+08:00| 3.2260694930700566E-7|
|1970-01-01T08:00:00.007+08:00|  8.723291605373329E-8|
|1970-01-01T08:00:00.008+08:00|  1.108657103979944E-7|
|1970-01-01T08:00:00.009+08:00| 1.2727110997246171E-8|
|1970-01-01T08:00:00.010+08:00|1.9852334701272664E-23|
|1970-01-01T08:00:00.011+08:00| 1.2727111194499847E-8|
|1970-01-01T08:00:00.012+08:00|  1.108657103979944E-7|
|1970-01-01T08:00:00.013+08:00|  8.723291785769131E-8|
|1970-01-01T08:00:00.014+08:00|  3.226069493070057E-7|
|1970-01-01T08:00:00.015+08:00|     9.999999850988388|
|1970-01-01T08:00:00.016+08:00|    19.999999960195904|
|1970-01-01T08:00:00.017+08:00|  8.723291747109068E-8|
|1970-01-01T08:00:00.018+08:00| 2.3855207991018386E-7|
|1970-01-01T08:00:00.019+08:00| 1.2727112069910878E-8|
+-----------------------------+----------------------+
```

Note: The input is $y=sin(2\pi t/4)+2sin(2\pi t/5)$ with a length of 20. Thus, there are peaks in $k=4$ and $k=5$ of the output.

##### Uniform FFT with Compression

Input series is the same as above, the SQL for query is shown below:

```sql
select fft(s1, 'result'='real', 'compress'='0.99'), fft(s1, 'result'='imag','compress'='0.99') from root.test.d1
```

Output series:

```
+-----------------------------+----------------------+----------------------+
|                         Time|  fft(root.test.d1.s1,|  fft(root.test.d1.s1,|
|                             |      "result"="real",|      "result"="imag",|
|                             |    "compress"="0.99")|    "compress"="0.99")|
+-----------------------------+----------------------+----------------------+
|1970-01-01T08:00:00.000+08:00|                   0.0|                   0.0|
|1970-01-01T08:00:00.001+08:00| -3.932894010461041E-9| 1.2104201863039066E-8|
|1970-01-01T08:00:00.002+08:00|-1.4021739447490164E-7| 1.9299268669082926E-7|
|1970-01-01T08:00:00.003+08:00| -7.057291240286645E-8|  5.127422242345858E-8|
|1970-01-01T08:00:00.004+08:00|    19.021130288047125|    -6.180339875198807|
|1970-01-01T08:00:00.005+08:00|     9.999999850988388| 3.501852745067114E-16|
|1970-01-01T08:00:00.019+08:00| -3.932894898639461E-9|-1.2104202549376264E-8|
+-----------------------------+----------------------+----------------------+
```

Note: Based on the conjugation of the Fourier transform result, only the first half of the compression result is reserved.
According to the given parameter, data points are reserved from low frequency to high frequency until the reserved energy ratio exceeds it.
The last data point is reserved to indicate the length of the series.

### HighPass

#### Registration statement

```sql
create function highpass as 'org.apache.iotdb.library.frequency.UDTFHighPass'
```

#### Usage

This function performs low-pass filtering on the input series and extracts components above the cutoff frequency.
The timestamps of input will be ignored and all data points will be regarded as equidistant.

**Name:** HIGHPASS

**Input:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `wpass`: The normalized cutoff frequency which values (0,1). This parameter cannot be lacked.

**Output:** Output a single series. The type is DOUBLE. It is the input after filtering. The length and timestamps of output are the same as the input.

**Note:** `NaN` in the input series will be ignored.

#### Examples

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|1970-01-01T08:00:00.000+08:00|       2.902113|
|1970-01-01T08:00:01.000+08:00|      1.1755705|
|1970-01-01T08:00:02.000+08:00|     -2.1755705|
|1970-01-01T08:00:03.000+08:00|     -1.9021131|
|1970-01-01T08:00:04.000+08:00|            1.0|
|1970-01-01T08:00:05.000+08:00|      1.9021131|
|1970-01-01T08:00:06.000+08:00|      0.1755705|
|1970-01-01T08:00:07.000+08:00|     -1.1755705|
|1970-01-01T08:00:08.000+08:00|      -0.902113|
|1970-01-01T08:00:09.000+08:00|            0.0|
|1970-01-01T08:00:10.000+08:00|       0.902113|
|1970-01-01T08:00:11.000+08:00|      1.1755705|
|1970-01-01T08:00:12.000+08:00|     -0.1755705|
|1970-01-01T08:00:13.000+08:00|     -1.9021131|
|1970-01-01T08:00:14.000+08:00|           -1.0|
|1970-01-01T08:00:15.000+08:00|      1.9021131|
|1970-01-01T08:00:16.000+08:00|      2.1755705|
|1970-01-01T08:00:17.000+08:00|     -1.1755705|
|1970-01-01T08:00:18.000+08:00|      -2.902113|
|1970-01-01T08:00:19.000+08:00|            0.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select highpass(s1,'wpass'='0.45') from root.test.d1
```

Output series:

```
+-----------------------------+-----------------------------------------+
|                         Time|highpass(root.test.d1.s1, "wpass"="0.45")|
+-----------------------------+-----------------------------------------+
|1970-01-01T08:00:00.000+08:00|                       0.9999999534830373|
|1970-01-01T08:00:01.000+08:00|                    1.7462829277628608E-8|
|1970-01-01T08:00:02.000+08:00|                      -0.9999999593178128|
|1970-01-01T08:00:03.000+08:00|                   -4.1115269056426626E-8|
|1970-01-01T08:00:04.000+08:00|                       0.9999999925494194|
|1970-01-01T08:00:05.000+08:00|                     3.328126513330016E-8|
|1970-01-01T08:00:06.000+08:00|                      -1.0000000183304454|
|1970-01-01T08:00:07.000+08:00|                    6.260191433311374E-10|
|1970-01-01T08:00:08.000+08:00|                       1.0000000018134796|
|1970-01-01T08:00:09.000+08:00|                   -3.097210911744423E-17|
|1970-01-01T08:00:10.000+08:00|                      -1.0000000018134794|
|1970-01-01T08:00:11.000+08:00|                   -6.260191627862097E-10|
|1970-01-01T08:00:12.000+08:00|                       1.0000000183304454|
|1970-01-01T08:00:13.000+08:00|                    -3.328126501424346E-8|
|1970-01-01T08:00:14.000+08:00|                      -0.9999999925494196|
|1970-01-01T08:00:15.000+08:00|                     4.111526915498874E-8|
|1970-01-01T08:00:16.000+08:00|                       0.9999999593178128|
|1970-01-01T08:00:17.000+08:00|                   -1.7462829341296528E-8|
|1970-01-01T08:00:18.000+08:00|                      -0.9999999534830369|
|1970-01-01T08:00:19.000+08:00|                   -1.035237222742873E-16|
+-----------------------------+-----------------------------------------+
```

Note: The input is $y=sin(2\pi t/4)+2sin(2\pi t/5)$ with a length of 20. Thus, the output is $y=sin(2\pi t/4)$ after high-pass filtering.

### IFFT

#### Registration statement

```sql
create function ifft as 'org.apache.iotdb.library.frequency.UDTFIFFT'
```

#### Usage

This function treats the two input series as the real and imaginary part of a complex series, performs an inverse fast Fourier transform (IFFT), and outputs the real part of the result.
For the input format, please refer to the output format of `FFT` function.
Moreover, the compressed output of `FFT` function is also supported.

**Name:** IFFT

**Input:** Only support two input series. The types are both INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `start`: The start time of the output series with the format 'yyyy-MM-dd HH:mm:ss'. By default, it is '1970-01-01 08:00:00'.
+ `interval`: The interval of the output series, which is a positive number with an unit. The unit is 'ms' for millisecond, 's' for second, 'm' for minute, 'h' for hour and 'd' for day. By default, it is 1s.

**Output:** Output a single series. The type is DOUBLE. It is strictly equispaced. The values are the results of IFFT.

**Note:** If a row contains null points or `NaN`, it will be ignored.

#### Examples


Input series:

```
+-----------------------------+----------------------+----------------------+
|                         Time|       root.test.d1.re|       root.test.d1.im|
+-----------------------------+----------------------+----------------------+
|1970-01-01T08:00:00.000+08:00|                   0.0|                   0.0|
|1970-01-01T08:00:00.001+08:00| -3.932894010461041E-9| 1.2104201863039066E-8|
|1970-01-01T08:00:00.002+08:00|-1.4021739447490164E-7| 1.9299268669082926E-7|
|1970-01-01T08:00:00.003+08:00| -7.057291240286645E-8|  5.127422242345858E-8|
|1970-01-01T08:00:00.004+08:00|    19.021130288047125|    -6.180339875198807|
|1970-01-01T08:00:00.005+08:00|     9.999999850988388| 3.501852745067114E-16|
|1970-01-01T08:00:00.019+08:00| -3.932894898639461E-9|-1.2104202549376264E-8|
+-----------------------------+----------------------+----------------------+
```


SQL for query:

```sql
select ifft(re, im, 'interval'='1m', 'start'='2021-01-01 00:00:00') from root.test.d1
```

Output series:

```
+-----------------------------+-------------------------------------------------------+
|                         Time|ifft(root.test.d1.re, root.test.d1.im, "interval"="1m",|
|                             |                         "start"="2021-01-01 00:00:00")|
+-----------------------------+-------------------------------------------------------+
|2021-01-01T00:00:00.000+08:00|                                      2.902112992431231|
|2021-01-01T00:01:00.000+08:00|                                     1.1755704705132448|
|2021-01-01T00:02:00.000+08:00|                                     -2.175570513757101|
|2021-01-01T00:03:00.000+08:00|                                    -1.9021130389094498|
|2021-01-01T00:04:00.000+08:00|                                     0.9999999925494194|
|2021-01-01T00:05:00.000+08:00|                                      1.902113046743454|
|2021-01-01T00:06:00.000+08:00|                                    0.17557053610884188|
|2021-01-01T00:07:00.000+08:00|                                    -1.1755704886020932|
|2021-01-01T00:08:00.000+08:00|                                    -0.9021130371347148|
|2021-01-01T00:09:00.000+08:00|                                  3.552713678800501E-16|
|2021-01-01T00:10:00.000+08:00|                                     0.9021130371347154|
|2021-01-01T00:11:00.000+08:00|                                     1.1755704886020932|
|2021-01-01T00:12:00.000+08:00|                                   -0.17557053610884144|
|2021-01-01T00:13:00.000+08:00|                                     -1.902113046743454|
|2021-01-01T00:14:00.000+08:00|                                    -0.9999999925494196|
|2021-01-01T00:15:00.000+08:00|                                     1.9021130389094498|
|2021-01-01T00:16:00.000+08:00|                                     2.1755705137571004|
|2021-01-01T00:17:00.000+08:00|                                    -1.1755704705132448|
|2021-01-01T00:18:00.000+08:00|                                     -2.902112992431231|
|2021-01-01T00:19:00.000+08:00|                                 -3.552713678800501E-16|
+-----------------------------+-------------------------------------------------------+
```

### LowPass

#### Registration statement

```sql
create function lowpass as 'org.apache.iotdb.library.frequency.UDTFLowPass'
```

#### Usage

This function performs low-pass filtering on the input series and extracts components below the cutoff frequency.
The timestamps of input will be ignored and all data points will be regarded as equidistant.

**Name:** LOWPASS

**Input:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `wpass`: The normalized cutoff frequency which values (0,1). This parameter cannot be lacked.

**Output:** Output a single series. The type is DOUBLE. It is the input after filtering. The length and timestamps of output are the same as the input.

**Note:** `NaN` in the input series will be ignored.

#### Examples

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|1970-01-01T08:00:00.000+08:00|       2.902113|
|1970-01-01T08:00:01.000+08:00|      1.1755705|
|1970-01-01T08:00:02.000+08:00|     -2.1755705|
|1970-01-01T08:00:03.000+08:00|     -1.9021131|
|1970-01-01T08:00:04.000+08:00|            1.0|
|1970-01-01T08:00:05.000+08:00|      1.9021131|
|1970-01-01T08:00:06.000+08:00|      0.1755705|
|1970-01-01T08:00:07.000+08:00|     -1.1755705|
|1970-01-01T08:00:08.000+08:00|      -0.902113|
|1970-01-01T08:00:09.000+08:00|            0.0|
|1970-01-01T08:00:10.000+08:00|       0.902113|
|1970-01-01T08:00:11.000+08:00|      1.1755705|
|1970-01-01T08:00:12.000+08:00|     -0.1755705|
|1970-01-01T08:00:13.000+08:00|     -1.9021131|
|1970-01-01T08:00:14.000+08:00|           -1.0|
|1970-01-01T08:00:15.000+08:00|      1.9021131|
|1970-01-01T08:00:16.000+08:00|      2.1755705|
|1970-01-01T08:00:17.000+08:00|     -1.1755705|
|1970-01-01T08:00:18.000+08:00|      -2.902113|
|1970-01-01T08:00:19.000+08:00|            0.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select lowpass(s1,'wpass'='0.45') from root.test.d1
```

Output series:

```
+-----------------------------+----------------------------------------+
|                         Time|lowpass(root.test.d1.s1, "wpass"="0.45")|
+-----------------------------+----------------------------------------+
|1970-01-01T08:00:00.000+08:00|                      1.9021130073323922|
|1970-01-01T08:00:01.000+08:00|                      1.1755704705132448|
|1970-01-01T08:00:02.000+08:00|                     -1.1755705286582614|
|1970-01-01T08:00:03.000+08:00|                     -1.9021130389094498|
|1970-01-01T08:00:04.000+08:00|                    7.450580419288145E-9|
|1970-01-01T08:00:05.000+08:00|                       1.902113046743454|
|1970-01-01T08:00:06.000+08:00|                      1.1755705212076808|
|1970-01-01T08:00:07.000+08:00|                     -1.1755704886020932|
|1970-01-01T08:00:08.000+08:00|                     -1.9021130222335536|
|1970-01-01T08:00:09.000+08:00|                   3.552713678800501E-16|
|1970-01-01T08:00:10.000+08:00|                      1.9021130222335536|
|1970-01-01T08:00:11.000+08:00|                      1.1755704886020932|
|1970-01-01T08:00:12.000+08:00|                     -1.1755705212076801|
|1970-01-01T08:00:13.000+08:00|                      -1.902113046743454|
|1970-01-01T08:00:14.000+08:00|                    -7.45058112983088E-9|
|1970-01-01T08:00:15.000+08:00|                      1.9021130389094498|
|1970-01-01T08:00:16.000+08:00|                      1.1755705286582616|
|1970-01-01T08:00:17.000+08:00|                     -1.1755704705132448|
|1970-01-01T08:00:18.000+08:00|                     -1.9021130073323924|
|1970-01-01T08:00:19.000+08:00|                  -2.664535259100376E-16|
+-----------------------------+----------------------------------------+
```

Note: The input is $y=sin(2\pi t/4)+2sin(2\pi t/5)$ with a length of 20. Thus, the output is $y=2sin(2\pi t/5)$ after low-pass filtering.


### Envelope

#### Registration statement

```sql
create function envelope as 'org.apache.iotdb.library.frequency.UDFEnvelopeAnalysis'
```

#### Usage

This function achieves signal demodulation and envelope extraction by inputting a one-dimensional floating-point array and a user specified modulation frequency. The goal of demodulation is to extract the parts of interest from complex signals, making them easier to understand. For example, demodulation can be used to find the envelope of the signal, that is, the trend of amplitude changes.

**Name：** Envelope

**Input：** Only supports a single input sequence, with types INT32/INT64/FLOAT/DOUBLE


**Parameters：**

+ `frequency`: Frequency (optional, positive number. If this parameter is not filled in, the system will infer the frequency based on the time interval corresponding to the sequence).
+ `amplification`: Amplification factor (optional, positive integer. The output of the Time column is a set of positive integers and does not output decimals. When the frequency is less than 1, this parameter can be used to amplify the frequency to display normal results).

**Output：**
+ `Time`： The meaning of the value returned by this column is frequency rather than time. If the output format is time format (e.g. 1970-01-01T08:00: 19.000+08:00), please convert it to a timestamp value.


+ `Envelope(Path, 'frequency'='{frequency}')`：Output a single sequence of type DOUBLE, which is the result of envelope analysis.

**Note：** When the values of the demodulated original sequence are discontinuous, this function will treat it as continuous processing. It is recommended that the analyzed time series be a complete time series of values. It is also recommended to specify a start time and an end time.

#### Examples

Input series:


```
+-----------------------------+---------------+
|                         Time|root.test.d1.s1|
+-----------------------------+---------------+
|1970-01-01T08:00:01.000+08:00|       1.0     |
|1970-01-01T08:00:02.000+08:00|       2.0     |
|1970-01-01T08:00:03.000+08:00|       3.0     |
|1970-01-01T08:00:04.000+08:00|       4.0     |
|1970-01-01T08:00:05.000+08:00|       5.0     |
|1970-01-01T08:00:06.000+08:00|       6.0     |
|1970-01-01T08:00:07.000+08:00|       7.0     |
|1970-01-01T08:00:08.000+08:00|       8.0     |
|1970-01-01T08:00:09.000+08:00|       9.0     |
|1970-01-01T08:00:10.000+08:00|       10.0    |
+-----------------------------+---------------+
```

SQL for query:

```sql
set time_display_type=long;
select envelope(s1),envelope(s1,'frequency'='1000'),envelope(s1,'amplification'='10') from root.test.d1;
```

Output series:


```
+----+-------------------------+---------------------------------------------+-----------------------------------------------+
|Time|envelope(root.test.d1.s1)|envelope(root.test.d1.s1, "frequency"="1000")|envelope(root.test.d1.s1, "amplification"="10")|
+----+-------------------------+---------------------------------------------+-----------------------------------------------+
|   0|        6.284350808484124|                            6.284350808484124|                              6.284350808484124|
| 100|       1.5581923657404393|                           1.5581923657404393|                                           null|
| 200|       0.8503211038340728|                           0.8503211038340728|                                           null|
| 300|        0.512808785945551|                            0.512808785945551|                                           null|
| 400|      0.26361156774506744|                          0.26361156774506744|                                           null|
|1000|                     null|                                         null|                             1.5581923657404393|
|2000|                     null|                                         null|                             0.8503211038340728|
|3000|                     null|                                         null|                              0.512808785945551|
|4000|                     null|                                         null|                            0.26361156774506744|
+----+-------------------------+---------------------------------------------+-----------------------------------------------+

```


## Data Matching

### Cov

#### Registration statement

```sql
create function cov as 'org.apache.iotdb.library.dmatch.UDAFCov'
```

#### Usage

This function is used to calculate the population covariance.

**Name:** COV

**Input Series:** Only support two input series. The types are both INT32 / INT64 / FLOAT / DOUBLE.

**Output Series:** Output a single series. The type is DOUBLE. There is only one data point in the series, whose timestamp is 0 and value is the population covariance.

**Note:**

+ If a row contains missing points, null points or `NaN`, it will be ignored;
+ If all rows are ignored, `NaN` will be output.


#### Examples

Input series:

```
+-----------------------------+---------------+---------------+
|                         Time|root.test.d2.s1|root.test.d2.s2|
+-----------------------------+---------------+---------------+
|2020-01-01T00:00:02.000+08:00|          100.0|          101.0|
|2020-01-01T00:00:03.000+08:00|          101.0|           null|
|2020-01-01T00:00:04.000+08:00|          102.0|          101.0|
|2020-01-01T00:00:06.000+08:00|          104.0|          102.0|
|2020-01-01T00:00:08.000+08:00|          126.0|          102.0|
|2020-01-01T00:00:10.000+08:00|          108.0|          103.0|
|2020-01-01T00:00:12.000+08:00|           null|          103.0|
|2020-01-01T00:00:14.000+08:00|          112.0|          104.0|
|2020-01-01T00:00:15.000+08:00|          113.0|           null|
|2020-01-01T00:00:16.000+08:00|          114.0|          104.0|
|2020-01-01T00:00:18.000+08:00|          116.0|          105.0|
|2020-01-01T00:00:20.000+08:00|          118.0|          105.0|
|2020-01-01T00:00:22.000+08:00|          100.0|          106.0|
|2020-01-01T00:00:26.000+08:00|          124.0|          108.0|
|2020-01-01T00:00:28.000+08:00|          126.0|          108.0|
|2020-01-01T00:00:30.000+08:00|            NaN|          108.0|
+-----------------------------+---------------+---------------+
```

SQL for query:

```sql
select cov(s1,s2) from root.test.d2
```

Output series:

```
+-----------------------------+-------------------------------------+
|                         Time|cov(root.test.d2.s1, root.test.d2.s2)|
+-----------------------------+-------------------------------------+
|1970-01-01T08:00:00.000+08:00|                   12.291666666666666|
+-----------------------------+-------------------------------------+
```

### DTW

#### Registration statement

```sql
create function dtw as 'org.apache.iotdb.library.dmatch.UDAFDtw'
```

#### Usage

This function is used to calculate the DTW distance between two input series.

**Name:** DTW

**Input Series:** Only support two input series. The types are both INT32 / INT64 / FLOAT / DOUBLE.

**Output Series:** Output a single series. The type is DOUBLE. There is only one data point in the series, whose timestamp is 0 and value is the DTW distance.

**Note:**

+ If a row contains missing points, null points or `NaN`, it will be ignored;
+ If all rows are ignored, `0` will be output.


#### Examples

Input series:

```
+-----------------------------+---------------+---------------+
|                         Time|root.test.d2.s1|root.test.d2.s2|
+-----------------------------+---------------+---------------+
|1970-01-01T08:00:00.001+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.002+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.003+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.004+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.005+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.006+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.007+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.008+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.009+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.010+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.011+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.012+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.013+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.014+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.015+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.016+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.017+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.018+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.019+08:00|            1.0|            2.0|
|1970-01-01T08:00:00.020+08:00|            1.0|            2.0|
+-----------------------------+---------------+---------------+
```

SQL for query:

```sql
select dtw(s1,s2) from root.test.d2
```

Output series:

```
+-----------------------------+-------------------------------------+
|                         Time|dtw(root.test.d2.s1, root.test.d2.s2)|
+-----------------------------+-------------------------------------+
|1970-01-01T08:00:00.000+08:00|                                 20.0|
+-----------------------------+-------------------------------------+
```

### Pearson

#### Registration statement

```sql
create function pearson as 'org.apache.iotdb.library.dmatch.UDAFPearson'
```

#### Usage

This function is used to calculate the Pearson Correlation Coefficient.

**Name:** PEARSON

**Input Series:** Only support two input series. The types are both INT32 / INT64 / FLOAT / DOUBLE.

**Output Series:** Output a single series. The type is DOUBLE. There is only one data point in the series, whose timestamp is 0 and value is the Pearson Correlation Coefficient.

**Note:**

+ If a row contains missing points, null points or `NaN`, it will be ignored;
+ If all rows are ignored, `NaN` will be output.


#### Examples

Input series:

```
+-----------------------------+---------------+---------------+
|                         Time|root.test.d2.s1|root.test.d2.s2|
+-----------------------------+---------------+---------------+
|2020-01-01T00:00:02.000+08:00|          100.0|          101.0|
|2020-01-01T00:00:03.000+08:00|          101.0|           null|
|2020-01-01T00:00:04.000+08:00|          102.0|          101.0|
|2020-01-01T00:00:06.000+08:00|          104.0|          102.0|
|2020-01-01T00:00:08.000+08:00|          126.0|          102.0|
|2020-01-01T00:00:10.000+08:00|          108.0|          103.0|
|2020-01-01T00:00:12.000+08:00|           null|          103.0|
|2020-01-01T00:00:14.000+08:00|          112.0|          104.0|
|2020-01-01T00:00:15.000+08:00|          113.0|           null|
|2020-01-01T00:00:16.000+08:00|          114.0|          104.0|
|2020-01-01T00:00:18.000+08:00|          116.0|          105.0|
|2020-01-01T00:00:20.000+08:00|          118.0|          105.0|
|2020-01-01T00:00:22.000+08:00|          100.0|          106.0|
|2020-01-01T00:00:26.000+08:00|          124.0|          108.0|
|2020-01-01T00:00:28.000+08:00|          126.0|          108.0|
|2020-01-01T00:00:30.000+08:00|            NaN|          108.0|
+-----------------------------+---------------+---------------+
```

SQL for query:

```sql
select pearson(s1,s2) from root.test.d2
```

Output series:

```
+-----------------------------+-----------------------------------------+
|                         Time|pearson(root.test.d2.s1, root.test.d2.s2)|
+-----------------------------+-----------------------------------------+
|1970-01-01T08:00:00.000+08:00|                       0.5630881927754872|
+-----------------------------+-----------------------------------------+
```

### PtnSym

#### Registration statement

```sql
create function ptnsym as 'org.apache.iotdb.library.dmatch.UDTFPtnSym'
```

#### Usage

This function is used to find all symmetric subseries in the input whose degree of symmetry is less than the threshold.
The degree of symmetry is calculated by DTW.
The smaller the degree, the more symmetrical the series is.

**Name:** PATTERNSYMMETRIC

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE

**Parameter:**

+ `window`: The length of the symmetric subseries. It's a positive integer and the default value is 10.
+ `threshold`: The threshold of the degree of symmetry. It's non-negative. Only the subseries whose degree of symmetry is below it will be output. By default, all subseries will be output.


**Output Series:** Output a single series. The type is DOUBLE. Each data point in the output series corresponds to a symmetric subseries. The output timestamp is the starting timestamp of the subseries and the output value is the degree of symmetry.

#### Example

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d1.s4|
+-----------------------------+---------------+
|2021-01-01T12:00:00.000+08:00|            1.0|
|2021-01-01T12:00:01.000+08:00|            2.0|
|2021-01-01T12:00:02.000+08:00|            3.0|
|2021-01-01T12:00:03.000+08:00|            2.0|
|2021-01-01T12:00:04.000+08:00|            1.0|
|2021-01-01T12:00:05.000+08:00|            1.0|
|2021-01-01T12:00:06.000+08:00|            1.0|
|2021-01-01T12:00:07.000+08:00|            1.0|
|2021-01-01T12:00:08.000+08:00|            2.0|
|2021-01-01T12:00:09.000+08:00|            3.0|
|2021-01-01T12:00:10.000+08:00|            2.0|
|2021-01-01T12:00:11.000+08:00|            1.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select ptnsym(s4, 'window'='5', 'threshold'='0') from root.test.d1
```

Output series:

```
+-----------------------------+------------------------------------------------------+
|                         Time|ptnsym(root.test.d1.s4, "window"="5", "threshold"="0")|
+-----------------------------+------------------------------------------------------+
|2021-01-01T12:00:00.000+08:00|                                                   0.0|
|2021-01-01T12:00:07.000+08:00|                                                   0.0|
+-----------------------------+------------------------------------------------------+
```

### XCorr

#### Registration statement

```sql
create function xcorr as 'org.apache.iotdb.library.dmatch.UDTFXCorr'
```

#### Usage

This function is used to calculate the cross correlation function of given two time series.
For discrete time series, cross correlation is given by
$$CR(n) = \frac{1}{N} \sum_{m=1}^N S_1[m]S_2[m+n]$$
which represent the similarities between two series with different index shifts.

**Name:** XCORR

**Input Series:** Only support two input numeric series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Output Series:** Output a single series with DOUBLE as datatype.
There are $2N-1$ data points in the series, the center of which represents the cross correlation
calculated with pre-aligned series(that is $CR(0)$ in the formula above),
and the previous(or post) values represent those with shifting the latter series forward(or backward otherwise)
until the two series are no longer overlapped(not included).
In short, the values of output series are given by(index starts from 1)
$$OS[i] = CR(-N+i) = \frac{1}{N} \sum_{m=1}^{i} S_1[m]S_2[N-i+m],\ if\ i <= N$$
$$OS[i] = CR(i-N) = \frac{1}{N} \sum_{m=1}^{2N-i} S_1[i-N+m]S_2[m],\ if\ i > N$$

**Note:**

+ `null` and `NaN` values in the input series will be ignored and treated as 0.

#### Examples

Input series:

```
+-----------------------------+---------------+---------------+
|                         Time|root.test.d1.s1|root.test.d1.s2|
+-----------------------------+---------------+---------------+
|2020-01-01T00:00:01.000+08:00|           null|              6|
|2020-01-01T00:00:02.000+08:00|              2|              7|
|2020-01-01T00:00:03.000+08:00|              3|            NaN|
|2020-01-01T00:00:04.000+08:00|              4|              9|
|2020-01-01T00:00:05.000+08:00|              5|             10|
+-----------------------------+---------------+---------------+
```

SQL for query:

```sql
select xcorr(s1, s2) from root.test.d1 where time <= 2020-01-01 00:00:05
```

Output series:

```
+-----------------------------+---------------------------------------+
|                         Time|xcorr(root.test.d1.s1, root.test.d1.s2)|
+-----------------------------+---------------------------------------+
|1970-01-01T08:00:00.000+08:00|                                    0.0|
|1970-01-01T08:00:00.001+08:00|                                   10.0|
|1970-01-01T08:00:00.002+08:00|                                   16.0|
|1970-01-01T08:00:00.003+08:00|                                  16.75|
|1970-01-01T08:00:00.004+08:00|                                   20.0|
|1970-01-01T08:00:00.005+08:00|                                   13.2|
|1970-01-01T08:00:00.006+08:00|                                    5.6|
|1970-01-01T08:00:00.007+08:00|                                    7.0|
|1970-01-01T08:00:00.008+08:00|                                    0.0|
+-----------------------------+---------------------------------------+
```
### Pattern\_match

#### Registration statement

```SQL
create function pattern_match as 'org.apache.iotdb.library.match.UDAFPatternMatch'
```

#### Usage

This function performs pattern matching between an input time series and a predefined pattern. A match is considered successful if the similarity measure (distance) is less than or equal to a specified threshold. The results are output as a JSON list.

​**Name**​: PATTERN\_MATCH

**Input**​​**​ Series**​: Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE/ BOOLEAN

​**Parameter**​:

* `timePattern` : A comma-separated string of timestamps (e.g., `"t1,t2,t3"`). Length must be ​**greater than 1**​. Required.
* `valuePattern `: A comma-separated string of numerical values corresponding to `timePattern`. Length must **match ​**`timePattern` and be greater than 1.  Required.

> For boolean values: Use `1` for `true` and `0` for `false`.

* `theshold`: Float-type similarity threshold.  Required.

**Output**​​**​ Series**​: A JSON list containing all successfully matched segments. Each entry includes: start timestamp `startTime`, end timestamp `endTime`, calculated similarity value `distance`.

#### Example

1. Linear Data

Input series:

```SQL
IoTDB> select s0 from root.**
+-----------------------------+-------------+
|                         Time|root.db.d0.s0|
+-----------------------------+-------------+
|1970-01-01T08:00:00.001+08:00|          0.0|
|1970-01-01T08:00:00.002+08:00|          1.1|
|1970-01-01T08:00:00.003+08:00|          1.2|
|1970-01-01T08:00:00.004+08:00|          1.3|
|1970-01-01T08:00:00.005+08:00|          0.0|
+-----------------------------+-------------+
```

SQL for query:

```SQL
select pattern_match (s0, "timePattern"="1,2,3", "valuePattern"="1.1,1.2,1.3", "threshold"="0.5") as match_result from root.db.d0
```

Output series:

```SQL
+--------------------------------------------------------------------------------------------------+
|                                                                                      match_result|
+--------------------------------------------------------------------------------------------------+
|[{"distance":0.200000,"startTime":1,"endTime":3}, {"distance":0.000000,"startTime":2,"endTime":4}]|
+--------------------------------------------------------------------------------------------------+
```

2. Boolean Data

Input series:

```SQL
IoTDB> select s1 from root.**
+-----------------------------+-------------+
|                         Time|root.db.d0.s1|
+-----------------------------+-------------+
|1970-01-01T08:00:00.001+08:00|         true|
|1970-01-01T08:00:00.002+08:00|         true|
|1970-01-01T08:00:00.003+08:00|         true|
|1970-01-01T08:00:00.004+08:00|        false|
|1970-01-01T08:00:00.005+08:00|        false|
+-----------------------------+-------------+
```

SQL for query:

```SQL
select pattern_match (s1, "timePattern"="1,2,3", "valuePattern"="1,1,1", "threshold"="0.5") as match_result from root.db.d0
```

Output series:

```SQL
+-------------------------------------------------+
|                                     match_result|
+-------------------------------------------------+
|[{"distance":0.000000,"startTime":1,"endTime":3}]|
+-------------------------------------------------+
```

3. V-shaped Data

Input series:

```SQL
IoTDB> select s2 from root.**
+-----------------------------+-------------+
|                         Time|root.db.d0.s2|
+-----------------------------+-------------+
|1970-01-01T08:00:00.001+08:00|          0.0|
|1970-01-01T08:00:00.002+08:00|         -1.0|
|1970-01-01T08:00:00.003+08:00|         -2.0|
|1970-01-01T08:00:00.004+08:00|         -3.0|
|1970-01-01T08:00:00.005+08:00|         -2.0|
|1970-01-01T08:00:00.006+08:00|         -1.0|
|1970-01-01T08:00:00.007+08:00|         -0.0|
|1970-01-01T08:00:00.008+08:00|         -0.0|
|1970-01-01T08:00:00.009+08:00|         -0.0|
|1970-01-01T08:00:00.010+08:00|         -0.0|
+-----------------------------+-------------+
```

SQL for query:

```SQL
select pattern_match (s2, "timePattern"="1,2,3,4,5,6,7", "valuePattern"="0.0,-1.0,-2.0,-3.0,-2.0,-1.0,-0.0", "threshold"="10") as match_result from root.db.d0
```

Output series:

```SQL
+----------------------------------------------+
|                                  match_result|
+----------------------------------------------+
|[{"distance":0.53,"startTime":1,"endTime":10}]|
+----------------------------------------------+
```

4. Multiple Matching Pattern

Input series:

```SQL
IoTDB> select s0,s1 from root.**
+-----------------------------+-------------+-------------+
|                         Time|root.db.d0.s0|root.db.d0.s1|
+-----------------------------+-------------+-------------+
|1970-01-01T08:00:00.001+08:00|          0.0|         true|
|1970-01-01T08:00:00.002+08:00|          1.1|         true|
|1970-01-01T08:00:00.003+08:00|          1.2|         true|
|1970-01-01T08:00:00.004+08:00|          1.3|        false|
|1970-01-01T08:00:00.005+08:00|          0.0|        false|
+-----------------------------+-------------+-------------+
```

SQL for query:

```SQL
select pattern_match (s0, "timePattern"="1,2,3", "valuePattern"="1.1,1.2,1.3", "threshold"="0.5") as match_result1, pattern_match (s1, "timePattern"="1,2,3", "valuePattern"="1,1,1",
 "threshold"="0.5") as match_result2 from root.db.d0
```

Output series:

```SQL
+--------------------------------------------------------------------------------------------------+-------------------------------------------------+
|                                                                                     match_result1|                                    match_result2|
+--------------------------------------------------------------------------------------------------+-------------------------------------------------+
|[{"distance":0.200000,"startTime":1,"endTime":3}, {"distance":0.000000,"startTime":2,"endTime":4}]|[{"distance":0.000000,"startTime":1,"endTime":3}]|
+--------------------------------------------------------------------------------------------------+-------------------------------------------------+
```

## Data Repairing

### TimestampRepair

#### Registration statement

```sql
create function timestamprepair as 'org.apache.iotdb.library.drepair.UDTFTimestampRepair'
```

#### Usage

This function is used for timestamp repair.
According to the given standard time interval,
the method of minimizing the repair cost is adopted.
By fine-tuning the timestamps,
the original data with unstable timestamp interval is repaired to strictly equispaced data.
If no standard time interval is given,
this function will use the **median**, **mode** or **cluster** of the time interval to estimate the standard time interval.

**Name:** TIMESTAMPREPAIR

**Input Series:** Only support a single input series. The data type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `interval`: The standard time interval whose unit is millisecond. It is a positive integer. By default, it will be estimated according to the given method.
+ `method`: The method to estimate the standard time interval, which is 'median', 'mode' or 'cluster'. This parameter is only valid when `interval` is not given. By default, median will be used.

**Output Series:** Output a single series. The type is the same as the input. This series is the input after repairing.

#### Examples

##### Manually Specify the Standard Time Interval

When `interval` is given, this function repairs according to the given standard time interval.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d2.s1|
+-----------------------------+---------------+
|2021-07-01T12:00:00.000+08:00|            1.0|
|2021-07-01T12:00:10.000+08:00|            2.0|
|2021-07-01T12:00:19.000+08:00|            3.0|
|2021-07-01T12:00:30.000+08:00|            4.0|
|2021-07-01T12:00:40.000+08:00|            5.0|
|2021-07-01T12:00:50.000+08:00|            6.0|
|2021-07-01T12:01:01.000+08:00|            7.0|
|2021-07-01T12:01:11.000+08:00|            8.0|
|2021-07-01T12:01:21.000+08:00|            9.0|
|2021-07-01T12:01:31.000+08:00|           10.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select timestamprepair(s1,'interval'='10000') from root.test.d2
```

Output series:


```
+-----------------------------+----------------------------------------------------+
|                         Time|timestamprepair(root.test.d2.s1, "interval"="10000")|
+-----------------------------+----------------------------------------------------+
|2021-07-01T12:00:00.000+08:00|                                                 1.0|
|2021-07-01T12:00:10.000+08:00|                                                 2.0|
|2021-07-01T12:00:20.000+08:00|                                                 3.0|
|2021-07-01T12:00:30.000+08:00|                                                 4.0|
|2021-07-01T12:00:40.000+08:00|                                                 5.0|
|2021-07-01T12:00:50.000+08:00|                                                 6.0|
|2021-07-01T12:01:00.000+08:00|                                                 7.0|
|2021-07-01T12:01:10.000+08:00|                                                 8.0|
|2021-07-01T12:01:20.000+08:00|                                                 9.0|
|2021-07-01T12:01:30.000+08:00|                                                10.0|
|2021-07-01T12:01:40.000+08:00|                                                 NaN|
+-----------------------------+----------------------------------------------------+
```

##### Automatically Estimate the Standard Time Interval

When `interval` is default, this function estimates the standard time interval.

Input series is the same as above, the SQL for query is shown below:

```sql
select timestamprepair(s1) from root.test.d2
```

Output series:

```
+-----------------------------+--------------------------------+
|                         Time|timestamprepair(root.test.d2.s1)|
+-----------------------------+--------------------------------+
|2021-07-01T12:00:00.000+08:00|                             1.0|
|2021-07-01T12:00:10.000+08:00|                             2.0|
|2021-07-01T12:00:20.000+08:00|                             3.0|
|2021-07-01T12:00:30.000+08:00|                             4.0|
|2021-07-01T12:00:40.000+08:00|                             5.0|
|2021-07-01T12:00:50.000+08:00|                             6.0|
|2021-07-01T12:01:00.000+08:00|                             7.0|
|2021-07-01T12:01:10.000+08:00|                             8.0|
|2021-07-01T12:01:20.000+08:00|                             9.0|
|2021-07-01T12:01:30.000+08:00|                            10.0|
|2021-07-01T12:01:40.000+08:00|                             NaN|
+-----------------------------+--------------------------------+
```

### ValueFill

#### Registration statement

```sql
create function valuefill as 'org.apache.iotdb.library.drepair.UDTFValueFill'
```

#### Usage

This function is used to impute time series. Several methods are supported.

**Name**: ValueFill
**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `method`: {"mean", "previous", "linear", "likelihood", "AR", "MA", "SCREEN"}, default "linear".
  Method to use for imputation in series. "mean": use global mean value to fill holes; "previous": propagate last valid observation forward to next valid. "linear": simplest interpolation method; "likelihood":Maximum likelihood estimation based on the normal distribution of speed; "AR": auto regression; "MA": moving average; "SCREEN": speed constraint.

**Output Series:** Output a single series. The type is the same as the input. This series is the input after repairing.

**Note:** AR method use AR(1) model. Input value should be auto-correlated, or the function would output a single point (0, 0.0).

#### Examples

##### Fill with linear

When `method` is "linear" or the default, Screen method is used to impute.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d2.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:02.000+08:00|            NaN|
|2020-01-01T00:00:03.000+08:00|          101.0|
|2020-01-01T00:00:04.000+08:00|          102.0|
|2020-01-01T00:00:06.000+08:00|          104.0|
|2020-01-01T00:00:08.000+08:00|          126.0|
|2020-01-01T00:00:10.000+08:00|          108.0|
|2020-01-01T00:00:14.000+08:00|            NaN|
|2020-01-01T00:00:15.000+08:00|          113.0|
|2020-01-01T00:00:16.000+08:00|          114.0|
|2020-01-01T00:00:18.000+08:00|          116.0|
|2020-01-01T00:00:20.000+08:00|            NaN|
|2020-01-01T00:00:22.000+08:00|            NaN|
|2020-01-01T00:00:26.000+08:00|          124.0|
|2020-01-01T00:00:28.000+08:00|          126.0|
|2020-01-01T00:00:30.000+08:00|          128.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select valuefill(s1) from root.test.d2
```

Output series:

```
+-----------------------------+--------------------------+
|                         Time|valuefill(root.test.d2.s1)|
+-----------------------------+--------------------------+
|2020-01-01T00:00:02.000+08:00|                     101.0|
|2020-01-01T00:00:03.000+08:00|                     101.0|
|2020-01-01T00:00:04.000+08:00|                     102.0|
|2020-01-01T00:00:06.000+08:00|                     104.0|
|2020-01-01T00:00:08.000+08:00|                     126.0|
|2020-01-01T00:00:10.000+08:00|                     108.0|
|2020-01-01T00:00:14.000+08:00|                     110.5|
|2020-01-01T00:00:15.000+08:00|                     113.0|
|2020-01-01T00:00:16.000+08:00|                     114.0|
|2020-01-01T00:00:18.000+08:00|                     116.0|
|2020-01-01T00:00:20.000+08:00|        118.66666666666667|
|2020-01-01T00:00:22.000+08:00|        121.33333333333333|
|2020-01-01T00:00:26.000+08:00|                     124.0|
|2020-01-01T00:00:28.000+08:00|                     126.0|
|2020-01-01T00:00:30.000+08:00|                     128.0|
+-----------------------------+--------------------------+
```

##### Previous Fill

When `method` is "previous", previous method is used.

Input series is the same as above, the SQL for query is shown below:

```sql
select valuefill(s1,"method"="previous") from root.test.d2
```

Output series:

```
+-----------------------------+-----------------------------------------------+
|                         Time|valuefill(root.test.d2.s1, "method"="previous")|
+-----------------------------+-----------------------------------------------+
|2020-01-01T00:00:02.000+08:00|                                            NaN|
|2020-01-01T00:00:03.000+08:00|                                          101.0|
|2020-01-01T00:00:04.000+08:00|                                          102.0|
|2020-01-01T00:00:06.000+08:00|                                          104.0|
|2020-01-01T00:00:08.000+08:00|                                          126.0|
|2020-01-01T00:00:10.000+08:00|                                          108.0|
|2020-01-01T00:00:14.000+08:00|                                          108.0|
|2020-01-01T00:00:15.000+08:00|                                          113.0|
|2020-01-01T00:00:16.000+08:00|                                          114.0|
|2020-01-01T00:00:18.000+08:00|                                          116.0|
|2020-01-01T00:00:20.000+08:00|                                          116.0|
|2020-01-01T00:00:22.000+08:00|                                          116.0|
|2020-01-01T00:00:26.000+08:00|                                          124.0|
|2020-01-01T00:00:28.000+08:00|                                          126.0|
|2020-01-01T00:00:30.000+08:00|                                          128.0|
+-----------------------------+-----------------------------------------------+
```

### ValueRepair

#### Registration statement

```sql
create function valuerepair as 'org.apache.iotdb.library.drepair.UDTFValueRepair'
```

#### Usage

This function is used to repair the value of the time series.
Currently, two methods are supported:
**Screen** is a method based on speed threshold, which makes all speeds meet the threshold requirements under the premise of minimum changes;
**LsGreedy** is a method based on speed change likelihood, which models speed changes as Gaussian distribution, and uses a greedy algorithm to maximize the likelihood.


**Name:** VALUEREPAIR

**Input Series:** Only support a single input series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:**

+ `method`: The method used to repair, which is 'Screen' or 'LsGreedy'. By default, Screen is used.
+ `minSpeed`: This parameter is only valid with Screen. It is the speed threshold. Speeds below it will be regarded as outliers. By default, it is the median minus 3 times of median absolute deviation.
+ `maxSpeed`: This parameter is only valid with Screen. It is the speed threshold. Speeds above it will be regarded as outliers. By default, it is the median plus 3 times of median absolute deviation.
+ `center`: This parameter is only valid with LsGreedy. It is the center of the Gaussian distribution of speed changes. By default, it is 0.
+ `sigma`: This parameter is only valid with LsGreedy. It is the standard deviation of the Gaussian distribution of speed changes. By default, it is the median absolute deviation.

**Output Series:** Output a single series. The type is the same as the input. This series is the input after repairing.

**Note:** `NaN` will be filled with linear interpolation before repairing.

#### Examples

##### Repair with Screen

When `method` is 'Screen' or the default, Screen method is used.

Input series:

```
+-----------------------------+---------------+
|                         Time|root.test.d2.s1|
+-----------------------------+---------------+
|2020-01-01T00:00:02.000+08:00|          100.0|
|2020-01-01T00:00:03.000+08:00|          101.0|
|2020-01-01T00:00:04.000+08:00|          102.0|
|2020-01-01T00:00:06.000+08:00|          104.0|
|2020-01-01T00:00:08.000+08:00|          126.0|
|2020-01-01T00:00:10.000+08:00|          108.0|
|2020-01-01T00:00:14.000+08:00|          112.0|
|2020-01-01T00:00:15.000+08:00|          113.0|
|2020-01-01T00:00:16.000+08:00|          114.0|
|2020-01-01T00:00:18.000+08:00|          116.0|
|2020-01-01T00:00:20.000+08:00|          118.0|
|2020-01-01T00:00:22.000+08:00|          100.0|
|2020-01-01T00:00:26.000+08:00|          124.0|
|2020-01-01T00:00:28.000+08:00|          126.0|
|2020-01-01T00:00:30.000+08:00|            NaN|
+-----------------------------+---------------+
```

SQL for query:

```sql
select valuerepair(s1) from root.test.d2
```

Output series:

```
+-----------------------------+----------------------------+
|                         Time|valuerepair(root.test.d2.s1)|
+-----------------------------+----------------------------+
|2020-01-01T00:00:02.000+08:00|                       100.0|
|2020-01-01T00:00:03.000+08:00|                       101.0|
|2020-01-01T00:00:04.000+08:00|                       102.0|
|2020-01-01T00:00:06.000+08:00|                       104.0|
|2020-01-01T00:00:08.000+08:00|                       106.0|
|2020-01-01T00:00:10.000+08:00|                       108.0|
|2020-01-01T00:00:14.000+08:00|                       112.0|
|2020-01-01T00:00:15.000+08:00|                       113.0|
|2020-01-01T00:00:16.000+08:00|                       114.0|
|2020-01-01T00:00:18.000+08:00|                       116.0|
|2020-01-01T00:00:20.000+08:00|                       118.0|
|2020-01-01T00:00:22.000+08:00|                       120.0|
|2020-01-01T00:00:26.000+08:00|                       124.0|
|2020-01-01T00:00:28.000+08:00|                       126.0|
|2020-01-01T00:00:30.000+08:00|                       128.0|
+-----------------------------+----------------------------+
```

##### Repair with LsGreedy

When `method` is 'LsGreedy', LsGreedy method is used.

Input series is the same as above, the SQL for query is shown below:

```sql
select valuerepair(s1,'method'='LsGreedy') from root.test.d2
```

Output series:

```
+-----------------------------+-------------------------------------------------+
|                         Time|valuerepair(root.test.d2.s1, "method"="LsGreedy")|
+-----------------------------+-------------------------------------------------+
|2020-01-01T00:00:02.000+08:00|                                            100.0|
|2020-01-01T00:00:03.000+08:00|                                            101.0|
|2020-01-01T00:00:04.000+08:00|                                            102.0|
|2020-01-01T00:00:06.000+08:00|                                            104.0|
|2020-01-01T00:00:08.000+08:00|                                            106.0|
|2020-01-01T00:00:10.000+08:00|                                            108.0|
|2020-01-01T00:00:14.000+08:00|                                            112.0|
|2020-01-01T00:00:15.000+08:00|                                            113.0|
|2020-01-01T00:00:16.000+08:00|                                            114.0|
|2020-01-01T00:00:18.000+08:00|                                            116.0|
|2020-01-01T00:00:20.000+08:00|                                            118.0|
|2020-01-01T00:00:22.000+08:00|                                            120.0|
|2020-01-01T00:00:26.000+08:00|                                            124.0|
|2020-01-01T00:00:28.000+08:00|                                            126.0|
|2020-01-01T00:00:30.000+08:00|                                            128.0|
+-----------------------------+-------------------------------------------------+
```

## Series Discovery

### ConsecutiveSequences

#### Registration statement

```sql
create function consecutivesequences as 'org.apache.iotdb.library.series.UDTFConsecutiveSequences'
```

#### Usage

This function is used to find locally longest consecutive subsequences in strictly equispaced multidimensional data.

Strictly equispaced data is the data whose time intervals are strictly equal. Missing data, including missing rows and missing values, is allowed in it, while data redundancy and timestamp drift is not allowed.

Consecutive subsequence is the subsequence that is strictly equispaced with the standard time interval without any missing data. If a consecutive subsequence is not a proper subsequence of any consecutive subsequence, it is locally longest.

**Name:** CONSECUTIVESEQUENCES

**Input Series:** Support multiple input series. The type is arbitrary but the data is strictly equispaced.

**Parameters:**

+ `gap`: The standard time interval which is a positive number with an unit. The unit is 'ms' for millisecond, 's' for second, 'm' for minute, 'h' for hour and 'd' for day. By default, it will be estimated by the mode of time intervals.

**Output Series:** Output a single series. The type is INT32. Each data point in the output series corresponds to a locally longest consecutive subsequence. The output timestamp is the starting timestamp of the subsequence and the output value is the number of data points in the subsequence.

**Note:** For input series that is not strictly equispaced, there is no guarantee on the output.

#### Examples

##### Manually Specify the Standard Time Interval

It's able to manually specify the standard time interval by the parameter `gap`. It's notable that false parameter leads to false output.

Input series:

```
+-----------------------------+---------------+---------------+
|                         Time|root.test.d1.s1|root.test.d1.s2|
+-----------------------------+---------------+---------------+
|2020-01-01T00:00:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:05:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:10:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:20:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:25:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:30:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:35:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:40:00.000+08:00|            1.0|           null|
|2020-01-01T00:45:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:50:00.000+08:00|            1.0|            1.0|
+-----------------------------+---------------+---------------+
```

SQL for query:

```sql
select consecutivesequences(s1,s2,'gap'='5m') from root.test.d1
```

Output series:

```
+-----------------------------+------------------------------------------------------------------+
|                         Time|consecutivesequences(root.test.d1.s1, root.test.d1.s2, "gap"="5m")|
+-----------------------------+------------------------------------------------------------------+
|2020-01-01T00:00:00.000+08:00|                                                                 3|
|2020-01-01T00:20:00.000+08:00|                                                                 4|
|2020-01-01T00:45:00.000+08:00|                                                                 2|
+-----------------------------+------------------------------------------------------------------+
```


##### Automatically Estimate the Standard Time Interval

When `gap` is default, this function estimates the standard time interval by the mode of time intervals and gets the same results. Therefore, this usage is more recommended.

Input series is the same as above, the SQL for query is shown below:

```sql
select consecutivesequences(s1,s2) from root.test.d1
```

Output series:

```
+-----------------------------+------------------------------------------------------+
|                         Time|consecutivesequences(root.test.d1.s1, root.test.d1.s2)|
+-----------------------------+------------------------------------------------------+
|2020-01-01T00:00:00.000+08:00|                                                     3|
|2020-01-01T00:20:00.000+08:00|                                                     4|
|2020-01-01T00:45:00.000+08:00|                                                     2|
+-----------------------------+------------------------------------------------------+
```

### ConsecutiveWindows

#### Registration statement

```sql
create function consecutivewindows as 'org.apache.iotdb.library.series.UDTFConsecutiveWindows'
```

#### Usage

This function is used to find consecutive windows of specified length in strictly equispaced multidimensional data.

Strictly equispaced data is the data whose time intervals are strictly equal. Missing data, including missing rows and missing values, is allowed in it, while data redundancy and timestamp drift is not allowed.

Consecutive window is the subsequence that is strictly equispaced with the standard time interval without any missing data.

**Name:** CONSECUTIVEWINDOWS

**Input Series:** Support multiple input series. The type is arbitrary but the data is strictly equispaced.

**Parameters:**

+ `gap`: The standard time interval which is a positive number with an unit. The unit is 'ms' for millisecond, 's' for second, 'm' for minute, 'h' for hour and 'd' for day. By default, it will be estimated by the mode of time intervals.
+ `length`: The length of the window which is a positive number with an unit. The unit is 'ms' for millisecond, 's' for second, 'm' for minute, 'h' for hour and 'd' for day. This parameter cannot be lacked.

**Output Series:** Output a single series. The type is INT32. Each data point in the output series corresponds to a consecutive window. The output timestamp is the starting timestamp of the window and the output value is the number of data points in the window.

**Note:** For input series that is not strictly equispaced, there is no guarantee on the output.

#### Examples


Input series:

```
+-----------------------------+---------------+---------------+
|                         Time|root.test.d1.s1|root.test.d1.s2|
+-----------------------------+---------------+---------------+
|2020-01-01T00:00:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:05:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:10:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:20:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:25:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:30:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:35:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:40:00.000+08:00|            1.0|           null|
|2020-01-01T00:45:00.000+08:00|            1.0|            1.0|
|2020-01-01T00:50:00.000+08:00|            1.0|            1.0|
+-----------------------------+---------------+---------------+
```

SQL for query:

```sql
select consecutivewindows(s1,s2,'length'='10m') from root.test.d1
```

Output series:

```
+-----------------------------+--------------------------------------------------------------------+
|                         Time|consecutivewindows(root.test.d1.s1, root.test.d1.s2, "length"="10m")|
+-----------------------------+--------------------------------------------------------------------+
|2020-01-01T00:00:00.000+08:00|                                                                   3|
|2020-01-01T00:20:00.000+08:00|                                                                   4|
+-----------------------------+--------------------------------------------------------------------+
```

<!--

​    Licensed to the Apache Software Foundation (ASF) under one
​    or more contributor license agreements.  See the NOTICE file
​    distributed with this work for additional information
​    regarding copyright ownership.  The ASF licenses this file
​    to you under the Apache License, Version 2.0 (the
​    "License"); you may not use this file except in compliance
​    with the License.  You may obtain a copy of the License at
​    
​        http://www.apache.org/licenses/LICENSE-2.0
​    
​    Unless required by applicable law or agreed to in writing,
​    software distributed under the License is distributed on an
​    "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
​    KIND, either express or implied.  See the License for the
​    specific language governing permissions and limitations
​    under the License.

-->

## Machine Learning

### AR

#### Registration statement

```sql
create function ar as 'org.apache.iotdb.library.dlearn.UDTFAR'
```

#### Usage

This function is used to learn the coefficients of the autoregressive models for a time series.

**Name:** AR

**Input Series:** Only support a single input numeric series. The type is INT32 / INT64 / FLOAT / DOUBLE.

**Parameters:** 

- `p`: The order of the autoregressive model. Its default value is 1.

**Output Series:** Output a single series. The type is DOUBLE. The first line corresponds to the first order coefficient, and so on. 

**Note:** 

- Parameter `p` should be a positive integer. 
- Most points in the series should be sampled at a constant time interval. 
- Linear interpolation is applied for the missing points in the series.

#### Examples

##### Assigning Model Order

Input Series: 

```
+-----------------------------+---------------+
|                         Time|root.test.d0.s0|
+-----------------------------+---------------+
|2020-01-01T00:00:01.000+08:00|           -4.0|
|2020-01-01T00:00:02.000+08:00|           -3.0|
|2020-01-01T00:00:03.000+08:00|           -2.0|
|2020-01-01T00:00:04.000+08:00|           -1.0|
|2020-01-01T00:00:05.000+08:00|            0.0|
|2020-01-01T00:00:06.000+08:00|            1.0|
|2020-01-01T00:00:07.000+08:00|            2.0|
|2020-01-01T00:00:08.000+08:00|            3.0|
|2020-01-01T00:00:09.000+08:00|            4.0|
+-----------------------------+---------------+
```

SQL for query: 

```sql
select ar(s0,"p"="2") from root.test.d0
```

Output Series:

```
+-----------------------------+---------------------------+
|                         Time|ar(root.test.d0.s0,"p"="2")|
+-----------------------------+---------------------------+
|1970-01-01T08:00:00.001+08:00|                     0.9429|
|1970-01-01T08:00:00.002+08:00|                    -0.2571|
+-----------------------------+---------------------------+
```


### Cluster

#### Registration statement

```sql
create function cluster as 'org.apache.iotdb.library.dlearn.UDTFCluster'
```

#### Usage

This function takes a **single input time series**, splits it into **non-overlapping** contiguous subsequences (windows) of fixed length `l`, and clusters those subsequences into `k` groups.

**Name:** Cluster

**Input Series:** Only support single input numeric series. The type is INT32 / INT64 / FLOAT / DOUBLE. Points are read in time order; trailing samples that do not fill a full window are dropped (only `⌊n/l⌋` windows are used, where `n` is the number of valid points).

**Parameters:**

| Name | Meaning | Default | Notes |
|------|---------|---------|--------|
| `l` | Subsequence (window) length | (required) | Positive integer; each window has `l` consecutive samples. |
| `k` | Number of clusters | (required) | Integer ≥ 2. |
| `method` | Clustering algorithm | `kmeans` | Optional: `kmeans`, `kshape`, `medoidshape` (case-insensitive). Defaults to k-means if omitted. |
| `norm` | Z-score normalize each subsequence | `true` | Boolean; if `true`, each subsequence is standardized before clustering. |
| `maxiter` | Maximum iterations | `200` | Positive integer. |
| `output` | Output mode | `label` | `label`: one cluster id per window; `centroid`: concatenate the `k` centroid vectors in cluster order. |
| `sample_rate` | Greedy sampling rate | `0.3` | Used only when **`method` = `medoidshape`**; must be in `(0, 1]`. |


**`method` details:**

- **kmeans**: k-means in Euclidean space (optionally after per-window normalization).
- **kshape**: Assign by shape-based distance (SBD from normalized cross-correlation, NCC); centroids updated via SVD on the cluster matrix.
- **medoidshape**: Coarsely cluster, then greedy selection of `k` representative subsequences; `sample_rate` controls how many candidates are sampled each round.

**Output Series:** Controlled by `output`:

- **`output` = `label` (default):** One output series, type **INT32**. Number of points = number of full windows, `⌊n/l⌋`. Timestamp of each point = **time of the first sample** in that window; value = cluster id **0 … k−1**.
- **`output` = `centroid`:** One output series, type **DOUBLE**. Number of points = **`k × l`**: for clusters **0 → k−1**, emit the `l` components of each centroid in order (concatenated). Timestamps are `0, 1, 2, …` (placeholders only, no physical time meaning).

**Note:**

- Require valid point count `n ≥ l` and window count `⌊n/l⌋ ≥ k`.

#### Examples

##### KShape: window length 3, k = 2

Nine samples `{1,2,3,10,20,30,1,5,1}` form three non-overlapping windows `{1,2,3}`, `{10,20,30}`, `{1,5,1}`. With **`method` = `kshape`** (default `norm` = `true`), each output row is the cluster id for one window; timestamps are the window start times. Resulting labels: **0, 0, 1**.

Input Series:

```
+-----------------------------+---------------+
|                         Time|root.test.d0.s0|
+-----------------------------+---------------+
|2020-01-01T00:00:01.000+08:00|            1.0|
|2020-01-01T00:00:02.000+08:00|            2.0|
|2020-01-01T00:00:03.000+08:00|            3.0|
|2020-01-01T00:00:04.000+08:00|           10.0|
|2020-01-01T00:00:05.000+08:00|           20.0|
|2020-01-01T00:00:06.000+08:00|           30.0|
|2020-01-01T00:00:07.000+08:00|            1.0|
|2020-01-01T00:00:08.000+08:00|            5.0|
|2020-01-01T00:00:09.000+08:00|            1.0|
+-----------------------------+---------------+
```

SQL for query:

```sql
select cluster(s0, "l"="3", "k"="2", "method"="kshape", "output"="label")
from root.test.d0
```

Output Series:

```
+-----------------------------+----------------------------------------------------------------------------+
|                         Time|cluster(root.test.d0.s0,"l"="3","k"="2","method"="kshape","output"="label")|
+-----------------------------+----------------------------------------------------------------------------+
|2020-01-01T00:00:01.000+08:00|                                                                           0|
|2020-01-01T00:00:04.000+08:00|                                                                           0|
|2020-01-01T00:00:07.000+08:00|                                                                           1|
+-----------------------------+----------------------------------------------------------------------------+
```