commit | cf3c48f427a7763ca4591848a30868589041c8ed | [log] [tgz] |
---|---|---|
author | Daniel Gruno <humbedooh@apache.org> | Mon Aug 02 14:03:55 2021 +0200 |
committer | Daniel Gruno <humbedooh@apache.org> | Mon Aug 02 14:03:55 2021 +0200 |
tree | c6b97a29f677ae430eccb18557d22a31c33367b7 | |
parent | eb5a2cf9d2ef88731e352c7e22fb469551c527ff [diff] |
Add in secure topics feature
PyPubSub is a simple publisher/subscriber service, where clients can connect and either deliver a payload (in JSON format) or listen for specific payloads as a stream of events. It is written as an asynchronous Python service, and can handle thousands of connections at any given time on a single core. It utilizes the HTTP protocol and JSON for a simplistic delivery scheme.
A working copy of this program is in service by the Apache Software Foundation, listing all development events going on at the organization (see this page for an introduction to their service).
git clone https://github.com/Humbedooh/pypubsub.git
pipenv --three install -r requirements.txt
pypubsub.yaml
and (for ACL) pypubsub_acl.yaml
to fit your needspipenv run python3 pypubsub.py
curl -I http://localhost:2069
PyPubSub is designed around topics for both publishing and subscribing. A client can use topics to describe what an event is for when publishing, as well as what a client expects to subscribe to. Topics are generally simple words consisting of letters and numbers, but can be anything that is allowed in a URI path, apart from forward slashes (/
) and commas (,
) (these are reserved characters). Subscriptions are made on a “highest common denominator” basis, meaning the more topics you subscribe to, the fewer events you will receive, as the topics of an event must, at least, match all the topics a subscriber has subscribed to. Topics are set using the path segment of a URI, and are order agnostic, meaning fruits and apples
is the same as apples and fruits
internally.
As an example, let's imagine we wish to subscribe to all events for the topics surrounding apples
, which is a sub-topic of fruits
. We would then subscribe to http://localhost:2069/fruits/apples
and listen for events.
If a payload with fruits/apples
comes in, we would receive it. If a payload with just fruits
come in, we would not receive it, because we are specifically asking for apples
to be present as a topic. Neither would fruit/oranges
match our subscription, while fruits/apples/macintosh
would, as it contains our topics (and a bit more).
The below matrix shows how subscription paths match topics:
Topics | /fruits | /fruits/apples | /fruits/apples/red | /fruits/oranges | /apples |
---|---|---|---|---|---|
fruits | ✓ | ✗ | ✗ | ✗ | ✗ |
fruits + apples | ✓ | ✓ | ✗ | ✗ | ✓ |
fruits + apples + red | ✓ | ✓ | ✓ | ✗ | ✓ |
fruits + oranges | ✓ | ✗ | ✗ | ✓ | ✗ |
As mentioned above, subscription topics are typically AND'ed together, with more topics narrowing the event stream. Thus, if you wanted to subscribe to bar
OR foo
, you would need two streams.
It is possible (from 0.7.0 onwards) to utilize a single stream to subscribe to multiple topic streams at once, using a comma as a delimiter between topic batches. For instance, to subscribe to both apples/red
events AND oranges/ripe
events, you may subscribe to:
http://localhost:2069/apples/red,oranges/ripe
.
Event payloads requires that the IP or IP range (Ipv4 or IPv6) is listed in pypubsub.yaml
under payloaders
first. Once whitelisted, clients can do a POST or PUT to the pubsub service on port 2069, passing a JSON object as the request body, for instance:
curl -XPUT -d '{"text": "Apples are delicious"}' http://localhost:2069/fruits/apples
Event payloads MUST be in dictionary (hash) format, or they will be rejected.
On the subscription side, any client listening to http://localhost:2069/fruits
or http://localhost:2069/fruits/apples
will receive the following event in their stream:
{ "text": "Apples are delicious", "pubsub_topics": ["fruits", "apples"], "pubsub_path": "/fruits/apples", "pubsub_timestamp": 1588293679.5432327 }
To push an event to PyPubSub via Python, you can make use of the requests library in Python:
import requests requests.put('http://localhost:2069/fruits/apples', json = {"cultivar": "macintosh"})
Events are broadcast as JSON chunks in a chunked HTTP stream. Each chunk contains either a payload from a publisher, or a keep-alive ping from the PyPubSub server, which looks like this:
{"stillalive": 1588132959.6066568}
Ths stillalive
object is a simple timestamp showing, in epoch seconds, when the ping was sent.
You can subscribe to topics via cURL like so: curl http://localhost:2069/topics/here
where topics/here
are the topics you are subscribing to, with /
as a delimiter between topics. To subscribe to all events, you can omit the topics.
For Python, you can import the asfpy
package via pip and utilize its pubsub plugin:
import asfpy.pubsub def process_event(payload): print("we got an event from pubsub") ... def main(): pubsub = asfpy.pubsub.Listener('http://localhost:2069') pubsub.attach(process_event, raw=True) # poll forever
Using the PyPubSub class in clients/nodejs/client.js
one can listen for pubsub events and process them using node.js:
function process(payload) { // ping-back? if (payload.stillalive) { console.log("Got a ping-back"); // Actual payload? process it! } else { console.log("Got a payload from PyPubSub!"); console.log(payload); } } const pps = new PyPubSub('http://localhost:2069/'); pps.attach(process);
Likewise, using Ruby is a pretty straightforward case:
require 'net/http' require 'json' require 'thread' pubsub_URL = 'http://localhost:2069/' def do_stuff_with(event) print("Got a pubsub event!:\n") print(event) end def listen(url) ps_thread = Thread.new do begin uri = URI.parse(url) Net::HTTP.start(uri.host, uri.port) do |http| request = Net::HTTP::Get.new uri.request_uri http.request request do |response| body = '' response.read_body do |chunk| event = JSON.parse(chunk) if event['stillalive'] # pingback print("ping? PONG!\n") else do_stuff_with(event) end end end end end return ps_thread end begin ps_thread = listen(pubsub_URL) print("Pubsub thread started, waiting for results...") while ps_thread.alive? sleep 10 end print("Pubsub thread died :(\n") end
If configured, via the payload_backlog_size
setting in the main configuration, clients can request payloads that were pushed before they subscribed, using an X-Fetch-Since
request header denoting from when (in seconds since the UNIX epoch) they wish to receive events:
curl -H 'X-Fetch-Since: 1588293679' http://localhost:2069/
If there are any events in the backlog (private or public) that match this (aka are younger than the timestamp presented by the client requesting a backlog), they will be delivered to the client, assuming they are younger than the backlog maximum age requirement.
It is worth noting here, for pseudo security reasons, that if the backlog maximum is set sufficiently low (or the age requirement is omitted), this feature could be used to deduce whether or not private events have happened, as a client can request everything in the backlog and potentially gauge whether the size of the backlog differs from time to time. Clients without authorization cannot see private payloads this way, but it is theoretically possible to deduce that they happened. A sane approach is to always set the maximum age configuration to a value that is sufficiently low compared to the backlog max size. If you expect 1,000 payloads per day, you could set your max age to 48h and the backlog size to 5,000 to easily mitigate any potential deduction.
The backlog maximum age configuration expect a number with a time unit after it, for instance:
45s
: 45 seconds30m
: 30 minutes12h
: 12 hours7d
: 7 daysPyPubSub supports private events that only authenticated clients can receive.
To mark an event as private, simply prepend private
as the first topic when you push the event:
curl -XPUT -d '{"private_text": "Squeamish Ossifrage"}' http://localhost/private/topics/here
Events broadcast with a /private
prefix will only allude to its privacy via the pubsub_path
element in the JSON blob. The topics list does not include ‘private’ (as it's technically not a topic for the broadcast). Thus the above example would output the following event to all authed subscribers with access:
{ "private_text": "Squeamish Ossifrage", "pubsub_topics": ["topics", "here"], "pubsub_path": "/private/topics/here", "pubsub_timestamp": 1588293679.5432327 }
Clients ACL is defined in pypubsub_acl.yaml
(and is entirely optional, you can omit the file). See the example ACL configuration for an example. Access is, as with public events, defined with “highest common denominator” in mind, meaning access to topics is granted to the specific topic group specified in the yaml and its sub-groups. Thus, if you grant access to internal
and foo
in one ACL segment, events pushed to private/internal/foo
would be seen by that client, whereas pushes to private/internal/bar
would not.
To authenticate and receive private events, use Basic authentication, such as:
curl -u 'user:pass' http://localhost:2069/internal/topics/here
PyPubSub supports ACL via asynchronous LDAP, either through group memberships or single users via their dn.
See pypubsub.yaml
for an LDAP example.
PyPubSub supports AWS SQS for weaving in payloads from their server-less Simple Queue Services. Multiple queues can be supported and items pushed to SQS will seamlessly appear in the pubsub stream. For these objects to be compatible with pypubsub, they must be JSONified strings with a pubsub_path
element specifying the URI they would have otherwise been posted to via PyPubSub, for instance "pubsub_path": "/fruits/apples"
for a public payload or "pubsub_path": "/private/secretstuff"
for a private (auth-required) payload. If no such path is specified, PyPubSub will assume a default empty topic list (free-for-all).
For more information on how to configure SQS, please see pypubsub.yaml
. SQS support assumes that the AWS CLI has been set up, and the user has AWS configured in their .aws directory before startup.
PyPubSub supports using a filesystem-based backlog file for persistent storage of the backlog through restarts. To enable this feature, uncomment the backlog configuration in the pypubsub.yaml config file. This will store up to whatever the max backlog queue size is every 10 seconds assuming the backlog has changed. On restart, the backlog file will be read in and added to the in-memory backlog.
PyPubSub is licensed under the Apache License v/2.