/**
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 */
/*
*******************************************************************************
* Copyright (c) 1996-2013, International Business Machines Corporation and others.
* All Rights Reserved.
*******************************************************************************
*/

#ifndef UCOL_H
#define UCOL_H

#include "unicode/utypes.h"

#if !UCONFIG_NO_COLLATION

#include "unicode/unorm.h"
#include "unicode/localpointer.h"
#include "unicode/parseerr.h"
#include "unicode/uloc.h"
#include "unicode/uset.h"
#include "unicode/uscript.h"

/**
 * \file
 * \brief C API: Collator 
 *
 * <h2> Collator C API </h2>
 *
 * The C API for Collator performs locale-sensitive
 * string comparison. You use this service to build
 * searching and sorting routines for natural language text.
 * <em>Important: </em>The ICU collation service has been reimplemented 
 * in order to achieve better performance and UCA compliance. 
 * For details, see the 
 * <a href="http://source.icu-project.org/repos/icu/icuhtml/trunk/design/collation/ICU_collation_design.htm">
 * collation design document</a>.
 * <p>
 * For more information about the collation service see 
 * <a href="http://icu-project.org/userguide/Collate_Intro.html">the users guide</a>.
 * <p>
 * Collation service provides correct sorting orders for most locales supported in ICU. 
 * If specific data for a locale is not available, the orders eventually falls back
 * to the <a href="http://www.unicode.org/unicode/reports/tr10/">UCA sort order</a>. 
 * <p>
 * Sort ordering may be customized by providing your own set of rules. For more on
 * this subject see the 
 * <a href="http://icu-project.org/userguide/Collate_Customization.html">
 * Collation customization</a> section of the users guide.
 * <p>
 * @see         UCollationResult
 * @see         UNormalizationMode
 * @see         UCollationStrength
 * @see         UCollationElements
 */

/** A collator.
*  For usage in C programs.
*/
struct UCollator;
/** structure representing a collator object instance 
 * @stable ICU 2.0
 */
typedef struct UCollator UCollator;


/**
 * UCOL_LESS is returned if source string is compared to be less than target
 * string in the ucol_strcoll() method.
 * UCOL_EQUAL is returned if source string is compared to be equal to target
 * string in the ucol_strcoll() method.
 * UCOL_GREATER is returned if source string is compared to be greater than
 * target string in the ucol_strcoll() method.
 * @see ucol_strcoll()
 * <p>
 * Possible values for a comparison result 
 * @stable ICU 2.0
 */
typedef enum {
  /** string a == string b */
  UCOL_EQUAL    = 0,
  /** string a > string b */
  UCOL_GREATER    = 1,
  /** string a < string b */
  UCOL_LESS    = -1
} UCollationResult ;


/** Enum containing attribute values for controling collation behavior.
 * Here are all the allowable values. Not every attribute can take every value. The only
 * universal value is UCOL_DEFAULT, which resets the attribute value to the predefined  
 * value for that locale 
 * @stable ICU 2.0
 */
typedef enum {
  /** accepted by most attributes */
  UCOL_DEFAULT = -1,

  /** Primary collation strength */
  UCOL_PRIMARY = 0,
  /** Secondary collation strength */
  UCOL_SECONDARY = 1,
  /** Tertiary collation strength */
  UCOL_TERTIARY = 2,
  /** Default collation strength */
  UCOL_DEFAULT_STRENGTH = UCOL_TERTIARY,
  UCOL_CE_STRENGTH_LIMIT,
  /** Quaternary collation strength */
  UCOL_QUATERNARY=3,
  /** Identical collation strength */
  UCOL_IDENTICAL=15,
  UCOL_STRENGTH_LIMIT,

  /** Turn the feature off - works for UCOL_FRENCH_COLLATION, 
      UCOL_CASE_LEVEL, UCOL_HIRAGANA_QUATERNARY_MODE
      & UCOL_DECOMPOSITION_MODE*/
  UCOL_OFF = 16,
  /** Turn the feature on - works for UCOL_FRENCH_COLLATION, 
      UCOL_CASE_LEVEL, UCOL_HIRAGANA_QUATERNARY_MODE
      & UCOL_DECOMPOSITION_MODE*/
  UCOL_ON = 17,
  
  /** Valid for UCOL_ALTERNATE_HANDLING. Alternate handling will be shifted */
  UCOL_SHIFTED = 20,
  /** Valid for UCOL_ALTERNATE_HANDLING. Alternate handling will be non ignorable */
  UCOL_NON_IGNORABLE = 21,

  /** Valid for UCOL_CASE_FIRST - 
      lower case sorts before upper case */
  UCOL_LOWER_FIRST = 24,
  /** upper case sorts before lower case */
  UCOL_UPPER_FIRST = 25,

  UCOL_ATTRIBUTE_VALUE_COUNT

} UColAttributeValue;

/**
 * Enum containing the codes for reordering segments of the collation table that are not script
 * codes. These reordering codes are to be used in conjunction with the script codes.
 * @see ucol_getReorderCodes
 * @see ucol_setReorderCodes
 * @see ucol_getEquivalentReorderCodes
 * @see UScriptCode
 * @stable ICU 4.8
 */
 typedef enum {
   /**
    * A special reordering code that is used to specify the default
    * reordering codes for a locale.
    * @stable ICU 4.8
    */   
    UCOL_REORDER_CODE_DEFAULT       = -1,
   /**
    * A special reordering code that is used to specify no reordering codes.
    * @stable ICU 4.8
    */   
    UCOL_REORDER_CODE_NONE          = USCRIPT_UNKNOWN,
   /**
    * A special reordering code that is used to specify all other codes used for
    * reordering except for the codes lised as UColReorderCode values and those
    * listed explicitly in a reordering.
    * @stable ICU 4.8
    */   
    UCOL_REORDER_CODE_OTHERS        = USCRIPT_UNKNOWN,
   /**
    * Characters with the space property.
    * This is equivalent to the rule value "space".
    * @stable ICU 4.8
    */    
    UCOL_REORDER_CODE_SPACE         = 0x1000,
   /**
    * The first entry in the enumeration of reordering groups. This is intended for use in
    * range checking and enumeration of the reorder codes.
    * @stable ICU 4.8
    */    
    UCOL_REORDER_CODE_FIRST         = UCOL_REORDER_CODE_SPACE,
   /**
    * Characters with the punctuation property.
    * This is equivalent to the rule value "punct".
    * @stable ICU 4.8
    */    
    UCOL_REORDER_CODE_PUNCTUATION   = 0x1001,
   /**
    * Characters with the symbol property.
    * This is equivalent to the rule value "symbol".
    * @stable ICU 4.8
    */    
    UCOL_REORDER_CODE_SYMBOL        = 0x1002,
   /**
    * Characters with the currency property.
    * This is equivalent to the rule value "currency".
    * @stable ICU 4.8
    */    
    UCOL_REORDER_CODE_CURRENCY      = 0x1003,
   /**
    * Characters with the digit property.
    * This is equivalent to the rule value "digit".
    * @stable ICU 4.8
    */    
    UCOL_REORDER_CODE_DIGIT         = 0x1004,
   /**
    * The limit of the reorder codes. This is intended for use in range checking 
    * and enumeration of the reorder codes.
    * @stable ICU 4.8
    */    
    UCOL_REORDER_CODE_LIMIT         = 0x1005
} UColReorderCode;

/**
 * Base letter represents a primary difference.  Set comparison
 * level to UCOL_PRIMARY to ignore secondary and tertiary differences.
 * Use this to set the strength of a Collator object.
 * Example of primary difference, "abc" &lt; "abd"
 * 
 * Diacritical differences on the same base letter represent a secondary
 * difference.  Set comparison level to UCOL_SECONDARY to ignore tertiary
 * differences. Use this to set the strength of a Collator object.
 * Example of secondary difference, "&auml;" >> "a".
 *
 * Uppercase and lowercase versions of the same character represents a
 * tertiary difference.  Set comparison level to UCOL_TERTIARY to include
 * all comparison differences. Use this to set the strength of a Collator
 * object.
 * Example of tertiary difference, "abc" &lt;&lt;&lt; "ABC".
 *
 * Two characters are considered "identical" when they have the same
 * unicode spellings.  UCOL_IDENTICAL.
 * For example, "&auml;" == "&auml;".
 *
 * UCollationStrength is also used to determine the strength of sort keys 
 * generated from UCollator objects
 * These values can be now found in the UColAttributeValue enum.
 * @stable ICU 2.0
 **/
typedef UColAttributeValue UCollationStrength;

/** Attributes that collation service understands. All the attributes can take UCOL_DEFAULT
 * value, as well as the values specific to each one. 
 * @stable ICU 2.0
 */
typedef enum {
     /** Attribute for direction of secondary weights - used in Canadian French.
      * Acceptable values are UCOL_ON, which results in secondary weights
      * being considered backwards and UCOL_OFF which treats secondary
      * weights in the order they appear.
      * @stable ICU 2.0
      */
     UCOL_FRENCH_COLLATION, 
     /** Attribute for handling variable elements.
      * Acceptable values are UCOL_NON_IGNORABLE (default)
      * which treats all the codepoints with non-ignorable 
      * primary weights in the same way,
      * and UCOL_SHIFTED which causes codepoints with primary 
      * weights that are equal or below the variable top value
      * to be ignored on primary level and moved to the quaternary 
      * level.
      * @stable ICU 2.0
      */
     UCOL_ALTERNATE_HANDLING, 
     /** Controls the ordering of upper and lower case letters.
      * Acceptable values are UCOL_OFF (default), which orders
      * upper and lower case letters in accordance to their tertiary
      * weights, UCOL_UPPER_FIRST which forces upper case letters to 
      * sort before lower case letters, and UCOL_LOWER_FIRST which does 
      * the opposite.
      * @stable ICU 2.0
      */
     UCOL_CASE_FIRST, 
     /** Controls whether an extra case level (positioned before the third
      * level) is generated or not. Acceptable values are UCOL_OFF (default), 
      * when case level is not generated, and UCOL_ON which causes the case
      * level to be generated. Contents of the case level are affected by
      * the value of UCOL_CASE_FIRST attribute. A simple way to ignore 
      * accent differences in a string is to set the strength to UCOL_PRIMARY
      * and enable case level.
      * @stable ICU 2.0
      */
     UCOL_CASE_LEVEL,
     /** Controls whether the normalization check and necessary normalizations
      * are performed. When set to UCOL_OFF (default) no normalization check
      * is performed. The correctness of the result is guaranteed only if the 
      * input data is in so-called FCD form (see users manual for more info).
      * When set to UCOL_ON, an incremental check is performed to see whether
      * the input data is in the FCD form. If the data is not in the FCD form,
      * incremental NFD normalization is performed.
      * @stable ICU 2.0
      */
     UCOL_NORMALIZATION_MODE, 
     /** An alias for UCOL_NORMALIZATION_MODE attribute.
      * @stable ICU 2.0
      */
     UCOL_DECOMPOSITION_MODE = UCOL_NORMALIZATION_MODE,
     /** The strength attribute. Can be either UCOL_PRIMARY, UCOL_SECONDARY,
      * UCOL_TERTIARY, UCOL_QUATERNARY or UCOL_IDENTICAL. The usual strength
      * for most locales (except Japanese) is tertiary. Quaternary strength 
      * is useful when combined with shifted setting for alternate handling
      * attribute and for JIS x 4061 collation, when it is used to distinguish
      * between Katakana  and Hiragana (this is achieved by setting the 
      * UCOL_HIRAGANA_QUATERNARY mode to on. Otherwise, quaternary level
      * is affected only by the number of non ignorable code points in
      * the string. Identical strength is rarely useful, as it amounts 
      * to codepoints of the NFD form of the string.
      * @stable ICU 2.0
      */
     UCOL_STRENGTH,  
#ifndef U_HIDE_DEPRECATED_API
     /** When turned on, this attribute positions Hiragana before all  
      * non-ignorables on quaternary level This is a sneaky way to produce JIS
      * sort order.
      *
      * This attribute is an implementation detail of the CLDR Japanese tailoring.
      * The implementation might change to use a different mechanism
      * to achieve the same Japanese sort order.
      * Since ICU 50, this attribute is not settable any more via API functions.
      * @deprecated ICU 50 Implementation detail, cannot be set via API, might be removed from implementation.
      */
     UCOL_HIRAGANA_QUATERNARY_MODE = UCOL_STRENGTH + 1,
#endif  /* U_HIDE_DEPRECATED_API */
     /** When turned on, this attribute generates a collation key
      * for the numeric value of substrings of digits.
      * This is a way to get '100' to sort AFTER '2'. Note that the longest
      * digit substring that can be treated as a single collation element is
      * 254 digits (not counting leading zeros). If a digit substring is
      * longer than that, the digits beyond the limit will be treated as a
      * separate digit substring associated with a separate collation element.
      * @stable ICU 2.8
      */
     UCOL_NUMERIC_COLLATION = UCOL_STRENGTH + 2, 
     /**
      * The number of UColAttribute constants.
      * @stable ICU 2.0
      */
     UCOL_ATTRIBUTE_COUNT
} UColAttribute;

/** Options for retrieving the rule string 
 *  @stable ICU 2.0
 */
typedef enum {
  /**
   * Retrieves the tailoring rules only.
   * Same as calling the version of getRules() without UColRuleOption.
   * @stable ICU 2.0
   */
  UCOL_TAILORING_ONLY, 
  /**
   * Retrieves the "UCA rules" concatenated with the tailoring rules.
   * The "UCA rules" are an <i>approximation</i> of the root collator's sort order.
   * They are almost never used or useful at runtime and can be removed from the data.
   * See http://userguide.icu-project.org/collation/customization#TOC-Building-on-Existing-Locales
   * @stable ICU 2.0
   */
  UCOL_FULL_RULES 
} UColRuleOption ;

/**
 * Open a UCollator for comparing strings.
 * The UCollator pointer is used in all the calls to the Collation 
 * service. After finished, collator must be disposed of by calling
 * {@link #ucol_close }.
 * @param loc The locale containing the required collation rules. 
 *            Special values for locales can be passed in - 
 *            if NULL is passed for the locale, the default locale
 *            collation rules will be used. If empty string ("") or
 *            "root" are passed, UCA rules will be used.
 * @param status A pointer to an UErrorCode to receive any errors
 * @return A pointer to a UCollator, or 0 if an error occurred.
 * @see ucol_openRules
 * @see ucol_safeClone
 * @see ucol_close
 * @stable ICU 2.0
 */
U_STABLE UCollator* U_EXPORT2 
ucol_open(const char *loc, UErrorCode *status);

/**
 * Produce an UCollator instance according to the rules supplied.
 * The rules are used to change the default ordering, defined in the
 * UCA in a process called tailoring. The resulting UCollator pointer
 * can be used in the same way as the one obtained by {@link #ucol_strcoll }.
 * @param rules A string describing the collation rules. For the syntax
 *              of the rules please see users guide.
 * @param rulesLength The length of rules, or -1 if null-terminated.
 * @param normalizationMode The normalization mode: One of
 *             UCOL_OFF     (expect the text to not need normalization),
 *             UCOL_ON      (normalize), or
 *             UCOL_DEFAULT (set the mode according to the rules)
 * @param strength The default collation strength; one of UCOL_PRIMARY, UCOL_SECONDARY,
 * UCOL_TERTIARY, UCOL_IDENTICAL,UCOL_DEFAULT_STRENGTH - can be also set in the rules.
 * @param parseError  A pointer to UParseError to recieve information about errors
 *                    occurred during parsing. This argument can currently be set
 *                    to NULL, but at users own risk. Please provide a real structure.
 * @param status A pointer to an UErrorCode to receive any errors
 * @return A pointer to a UCollator. It is not guaranteed that NULL be returned in case
 *         of error - please use status argument to check for errors.
 * @see ucol_open
 * @see ucol_safeClone
 * @see ucol_close
 * @stable ICU 2.0
 */
U_STABLE UCollator* U_EXPORT2 
ucol_openRules( const UChar        *rules,
                int32_t            rulesLength,
                UColAttributeValue normalizationMode,
                UCollationStrength strength,
                UParseError        *parseError,
                UErrorCode         *status);

/** 
 * Open a collator defined by a short form string.
 * The structure and the syntax of the string is defined in the "Naming collators"
 * section of the users guide: 
 * http://icu-project.org/userguide/Collate_Concepts.html#Naming_Collators
 * Attributes are overriden by the subsequent attributes. So, for "S2_S3", final
 * strength will be 3. 3066bis locale overrides individual locale parts.
 * The call to this function is equivalent to a call to ucol_open, followed by a 
 * series of calls to ucol_setAttribute and ucol_setVariableTop.
 * @param definition A short string containing a locale and a set of attributes. 
 *                   Attributes not explicitly mentioned are left at the default
 *                   state for a locale.
 * @param parseError if not NULL, structure that will get filled with error's pre
 *                   and post context in case of error.
 * @param forceDefaults if FALSE, the settings that are the same as the collator 
 *                   default settings will not be applied (for example, setting
 *                   French secondary on a French collator would not be executed). 
 *                   If TRUE, all the settings will be applied regardless of the 
 *                   collator default value. If the definition
 *                   strings are to be cached, should be set to FALSE.
 * @param status     Error code. Apart from regular error conditions connected to 
 *                   instantiating collators (like out of memory or similar), this
 *                   API will return an error if an invalid attribute or attribute/value
 *                   combination is specified.
 * @return           A pointer to a UCollator or 0 if an error occured (including an 
 *                   invalid attribute).
 * @see ucol_open
 * @see ucol_setAttribute
 * @see ucol_setVariableTop
 * @see ucol_getShortDefinitionString
 * @see ucol_normalizeShortDefinitionString
 * @stable ICU 3.0
 *
 */
U_STABLE UCollator* U_EXPORT2
ucol_openFromShortString( const char *definition,
                          UBool forceDefaults,
                          UParseError *parseError,
                          UErrorCode *status);

#ifndef U_HIDE_DEPRECATED_API
/**
 * Get a set containing the contractions defined by the collator. The set includes
 * both the UCA contractions and the contractions defined by the collator. This set
 * will contain only strings. If a tailoring explicitly suppresses contractions from 
 * the UCA (like Russian), removed contractions will not be in the resulting set.
 * @param coll collator 
 * @param conts the set to hold the result. It gets emptied before
 *              contractions are added. 
 * @param status to hold the error code
 * @return the size of the contraction set
 *
 * @deprecated ICU 3.4, use ucol_getContractionsAndExpansions instead
 */
U_DEPRECATED int32_t U_EXPORT2
ucol_getContractions( const UCollator *coll,
                  USet *conts,
                  UErrorCode *status);
#endif  /* U_HIDE_DEPRECATED_API */

/**
 * Get a set containing the expansions defined by the collator. The set includes
 * both the UCA expansions and the expansions defined by the tailoring
 * @param coll collator
 * @param contractions if not NULL, the set to hold the contractions
 * @param expansions if not NULL, the set to hold the expansions
 * @param addPrefixes add the prefix contextual elements to contractions
 * @param status to hold the error code
 *
 * @stable ICU 3.4
 */
U_STABLE void U_EXPORT2
ucol_getContractionsAndExpansions( const UCollator *coll,
                  USet *contractions, USet *expansions,
                  UBool addPrefixes, UErrorCode *status);

/** 
 * Close a UCollator.
 * Once closed, a UCollator should not be used. Every open collator should
 * be closed. Otherwise, a memory leak will result.
 * @param coll The UCollator to close.
 * @see ucol_open
 * @see ucol_openRules
 * @see ucol_safeClone
 * @stable ICU 2.0
 */
U_STABLE void U_EXPORT2 
ucol_close(UCollator *coll);

#if U_SHOW_CPLUSPLUS_API

U_NAMESPACE_BEGIN

/**
 * \class LocalUCollatorPointer
 * "Smart pointer" class, closes a UCollator via ucol_close().
 * For most methods see the LocalPointerBase base class.
 *
 * @see LocalPointerBase
 * @see LocalPointer
 * @stable ICU 4.4
 */
U_DEFINE_LOCAL_OPEN_POINTER(LocalUCollatorPointer, UCollator, ucol_close);

U_NAMESPACE_END

#endif

/**
 * Compare two strings.
 * The strings will be compared using the options already specified.
 * @param coll The UCollator containing the comparison rules.
 * @param source The source string.
 * @param sourceLength The length of source, or -1 if null-terminated.
 * @param target The target string.
 * @param targetLength The length of target, or -1 if null-terminated.
 * @return The result of comparing the strings; one of UCOL_EQUAL,
 * UCOL_GREATER, UCOL_LESS
 * @see ucol_greater
 * @see ucol_greaterOrEqual
 * @see ucol_equal
 * @stable ICU 2.0
 */
U_STABLE UCollationResult U_EXPORT2 
ucol_strcoll(    const    UCollator    *coll,
        const    UChar        *source,
        int32_t            sourceLength,
        const    UChar        *target,
        int32_t            targetLength);

/** 
* Compare two strings in UTF-8. 
* The strings will be compared using the options already specified. 
* Note: When input string contains malformed a UTF-8 byte sequence, 
* this function treats these bytes as REPLACEMENT CHARACTER (U+FFFD).
* @param coll The UCollator containing the comparison rules. 
* @param source The source UTF-8 string. 
* @param sourceLength The length of source, or -1 if null-terminated. 
* @param target The target UTF-8 string. 
* @param targetLength The length of target, or -1 if null-terminated. 
* @param status A pointer to an UErrorCode to receive any errors 
* @return The result of comparing the strings; one of UCOL_EQUAL, 
* UCOL_GREATER, UCOL_LESS 
* @see ucol_greater 
* @see ucol_greaterOrEqual 
* @see ucol_equal 
* @stable ICU 50 
*/ 
U_STABLE UCollationResult U_EXPORT2
ucol_strcollUTF8(
        const UCollator *coll,
        const char      *source,
        int32_t         sourceLength,
        const char      *target,
        int32_t         targetLength,
        UErrorCode      *status);

/**
 * Determine if one string is greater than another.
 * This function is equivalent to {@link #ucol_strcoll } == UCOL_GREATER
 * @param coll The UCollator containing the comparison rules.
 * @param source The source string.
 * @param sourceLength The length of source, or -1 if null-terminated.
 * @param target The target string.
 * @param targetLength The length of target, or -1 if null-terminated.
 * @return TRUE if source is greater than target, FALSE otherwise.
 * @see ucol_strcoll
 * @see ucol_greaterOrEqual
 * @see ucol_equal
 * @stable ICU 2.0
 */
U_STABLE UBool U_EXPORT2 
ucol_greater(const UCollator *coll,
             const UChar     *source, int32_t sourceLength,
             const UChar     *target, int32_t targetLength);

/**
 * Determine if one string is greater than or equal to another.
 * This function is equivalent to {@link #ucol_strcoll } != UCOL_LESS
 * @param coll The UCollator containing the comparison rules.
 * @param source The source string.
 * @param sourceLength The length of source, or -1 if null-terminated.
 * @param target The target string.
 * @param targetLength The length of target, or -1 if null-terminated.
 * @return TRUE if source is greater than or equal to target, FALSE otherwise.
 * @see ucol_strcoll
 * @see ucol_greater
 * @see ucol_equal
 * @stable ICU 2.0
 */
U_STABLE UBool U_EXPORT2 
ucol_greaterOrEqual(const UCollator *coll,
                    const UChar     *source, int32_t sourceLength,
                    const UChar     *target, int32_t targetLength);

/**
 * Compare two strings for equality.
 * This function is equivalent to {@link #ucol_strcoll } == UCOL_EQUAL
 * @param coll The UCollator containing the comparison rules.
 * @param source The source string.
 * @param sourceLength The length of source, or -1 if null-terminated.
 * @param target The target string.
 * @param targetLength The length of target, or -1 if null-terminated.
 * @return TRUE if source is equal to target, FALSE otherwise
 * @see ucol_strcoll
 * @see ucol_greater
 * @see ucol_greaterOrEqual
 * @stable ICU 2.0
 */
U_STABLE UBool U_EXPORT2 
ucol_equal(const UCollator *coll,
           const UChar     *source, int32_t sourceLength,
           const UChar     *target, int32_t targetLength);

/**
 * Compare two UTF-8 encoded trings.
 * The strings will be compared using the options already specified.
 * @param coll The UCollator containing the comparison rules.
 * @param sIter The source string iterator.
 * @param tIter The target string iterator.
 * @return The result of comparing the strings; one of UCOL_EQUAL,
 * UCOL_GREATER, UCOL_LESS
 * @param status A pointer to an UErrorCode to receive any errors
 * @see ucol_strcoll
 * @stable ICU 2.6
 */
U_STABLE UCollationResult U_EXPORT2 
ucol_strcollIter(  const    UCollator    *coll,
                  UCharIterator *sIter,
                  UCharIterator *tIter,
                  UErrorCode *status);

/**
 * Get the collation strength used in a UCollator.
 * The strength influences how strings are compared.
 * @param coll The UCollator to query.
 * @return The collation strength; one of UCOL_PRIMARY, UCOL_SECONDARY,
 * UCOL_TERTIARY, UCOL_QUATERNARY, UCOL_IDENTICAL
 * @see ucol_setStrength
 * @stable ICU 2.0
 */
U_STABLE UCollationStrength U_EXPORT2 
ucol_getStrength(const UCollator *coll);

/**
 * Set the collation strength used in a UCollator.
 * The strength influences how strings are compared.
 * @param coll The UCollator to set.
 * @param strength The desired collation strength; one of UCOL_PRIMARY, 
 * UCOL_SECONDARY, UCOL_TERTIARY, UCOL_QUATERNARY, UCOL_IDENTICAL, UCOL_DEFAULT
 * @see ucol_getStrength
 * @stable ICU 2.0
 */
U_STABLE void U_EXPORT2 
ucol_setStrength(UCollator *coll,
                 UCollationStrength strength);

/**
 * Retrieves the reordering codes for this collator.
 * These reordering codes are a combination of UScript codes and UColReorderCode entries.
 * @param coll The UCollator to query.
 * @param dest The array to fill with the script ordering.
 * @param destCapacity The length of dest. If it is 0, then dest may be NULL and the function 
 * will only return the length of the result without writing any of the result string (pre-flighting).
 * @param pErrorCode Must be a valid pointer to an error code value, which must not indicate a 
 * failure before the function call.
 * @return The number of reordering codes written to the dest array.
 * @see ucol_setReorderCodes
 * @see ucol_getEquivalentReorderCodes
 * @see UScriptCode
 * @see UColReorderCode
 * @stable ICU 4.8
 */
U_STABLE int32_t U_EXPORT2 
ucol_getReorderCodes(const UCollator* coll,
                    int32_t* dest,
                    int32_t destCapacity,
                    UErrorCode *pErrorCode);
/** 
 * Sets the reordering codes for this collator.
 * Collation reordering allows scripts and some other defined blocks of characters 
 * to be moved relative to each other as a block. This reordering is done on top of 
 * the DUCET/CLDR standard collation order. Reordering can specify groups to be placed 
 * at the start and/or the end of the collation order. These groups are specified using
 * UScript codes and UColReorderCode entries.
 * <p>By default, reordering codes specified for the start of the order are placed in the 
 * order given after a group of "special" non-script blocks. These special groups of characters 
 * are space, punctuation, symbol, currency, and digit. These special groups are represented with
 * UColReorderCode entries. Script groups can be intermingled with 
 * these special non-script blocks if those special blocks are explicitly specified in the reordering.
 * <p>The special code OTHERS stands for any script that is not explicitly 
 * mentioned in the list of reordering codes given. Anything that is after OTHERS
 * will go at the very end of the reordering in the order given.
 * <p>The special reorder code DEFAULT will reset the reordering for this collator
 * to the default for this collator. The default reordering may be the DUCET/CLDR order or may be a reordering that
 * was specified when this collator was created from resource data or from rules. The 
 * DEFAULT code <b>must</b> be the sole code supplied when it used. If not
 * that will result in an U_ILLEGAL_ARGUMENT_ERROR being set.
 * <p>The special reorder code NONE will remove any reordering for this collator.
 * The result of setting no reordering will be to have the DUCET/CLDR ordering used. The 
 * NONE code <b>must</b> be the sole code supplied when it used.
 * @param coll The UCollator to set.
 * @param reorderCodes An array of script codes in the new order. This can be NULL if the 
 * length is also set to 0. An empty array will clear any reordering codes on the collator.
 * @param reorderCodesLength The length of reorderCodes.
 * @param pErrorCode Must be a valid pointer to an error code value, which must not indicate a
 * failure before the function call.
 * @see ucol_getReorderCodes
 * @see ucol_getEquivalentReorderCodes
 * @see UScriptCode
 * @see UColReorderCode
 * @stable ICU 4.8
 */ 
U_STABLE void U_EXPORT2 
ucol_setReorderCodes(UCollator* coll,
                    const int32_t* reorderCodes,
                    int32_t reorderCodesLength,
                    UErrorCode *pErrorCode);

/**
 * Retrieves the reorder codes that are grouped with the given reorder code. Some reorder
 * codes will be grouped and must reorder together.
 * @param reorderCode The reorder code to determine equivalence for.
 * @param dest The array to fill with the script ordering.
 * @param destCapacity The length of dest. If it is 0, then dest may be NULL and the function
 * will only return the length of the result without writing any of the result string (pre-flighting).
 * @param pErrorCode Must be a valid pointer to an error code value, which must not indicate 
 * a failure before the function call.
 * @return The number of reordering codes written to the dest array.
 * @see ucol_setReorderCodes
 * @see ucol_getReorderCodes
 * @see UScriptCode
 * @see UColReorderCode
 * @stable ICU 4.8
 */
U_STABLE int32_t U_EXPORT2 
ucol_getEquivalentReorderCodes(int32_t reorderCode,
                    int32_t* dest,
                    int32_t destCapacity,
                    UErrorCode *pErrorCode);

/**
 * Get the display name for a UCollator.
 * The display name is suitable for presentation to a user.
 * @param objLoc The locale of the collator in question.
 * @param dispLoc The locale for display.
 * @param result A pointer to a buffer to receive the attribute.
 * @param resultLength The maximum size of result.
 * @param status A pointer to an UErrorCode to receive any errors
 * @return The total buffer size needed; if greater than resultLength,
 * the output was truncated.
 * @stable ICU 2.0
 */
U_STABLE int32_t U_EXPORT2 
ucol_getDisplayName(    const    char        *objLoc,
            const    char        *dispLoc,
            UChar             *result,
            int32_t         resultLength,
            UErrorCode        *status);

/**
 * Get a locale for which collation rules are available.
 * A UCollator in a locale returned by this function will perform the correct
 * collation for the locale.
 * @param localeIndex The index of the desired locale.
 * @return A locale for which collation rules are available, or 0 if none.
 * @see ucol_countAvailable
 * @stable ICU 2.0
 */
U_STABLE const char* U_EXPORT2 
ucol_getAvailable(int32_t localeIndex);

/**
 * Determine how many locales have collation rules available.
 * This function is most useful as determining the loop ending condition for
 * calls to {@link #ucol_getAvailable }.
 * @return The number of locales for which collation rules are available.
 * @see ucol_getAvailable
 * @stable ICU 2.0
 */
U_STABLE int32_t U_EXPORT2 
ucol_countAvailable(void);

#if !UCONFIG_NO_SERVICE
/**
 * Create a string enumerator of all locales for which a valid
 * collator may be opened.
 * @param status input-output error code
 * @return a string enumeration over locale strings. The caller is
 * responsible for closing the result.
 * @stable ICU 3.0
 */
U_STABLE UEnumeration* U_EXPORT2
ucol_openAvailableLocales(UErrorCode *status);
#endif

/**
 * Create a string enumerator of all possible keywords that are relevant to
 * collation. At this point, the only recognized keyword for this
 * service is "collation".
 * @param status input-output error code
 * @return a string enumeration over locale strings. The caller is
 * responsible for closing the result.
 * @stable ICU 3.0
 */
U_STABLE UEnumeration* U_EXPORT2
ucol_getKeywords(UErrorCode *status);

/**
 * Given a keyword, create a string enumeration of all values
 * for that keyword that are currently in use.
 * @param keyword a particular keyword as enumerated by
 * ucol_getKeywords. If any other keyword is passed in, *status is set
 * to U_ILLEGAL_ARGUMENT_ERROR.
 * @param status input-output error code
 * @return a string enumeration over collation keyword values, or NULL
 * upon error. The caller is responsible for closing the result.
 * @stable ICU 3.0
 */
U_STABLE UEnumeration* U_EXPORT2
ucol_getKeywordValues(const char *keyword, UErrorCode *status);

/**
 * Given a key and a locale, returns an array of string values in a preferred
 * order that would make a difference. These are all and only those values where
 * the open (creation) of the service with the locale formed from the input locale
 * plus input keyword and that value has different behavior than creation with the
 * input locale alone.
 * @param key           one of the keys supported by this service.  For now, only
 *                      "collation" is supported.
 * @param locale        the locale
 * @param commonlyUsed  if set to true it will return only commonly used values
 *                      with the given locale in preferred order.  Otherwise,
 *                      it will return all the available values for the locale.
 * @param status error status
 * @return a string enumeration over keyword values for the given key and the locale.
 * @stable ICU 4.2
 */
U_STABLE UEnumeration* U_EXPORT2
ucol_getKeywordValuesForLocale(const char* key,
                               const char* locale,
                               UBool commonlyUsed,
                               UErrorCode* status);

/**
 * Return the functionally equivalent locale for the given
 * requested locale, with respect to given keyword, for the
 * collation service.  If two locales return the same result, then
 * collators instantiated for these locales will behave
 * equivalently.  The converse is not always true; two collators
 * may in fact be equivalent, but return different results, due to
 * internal details.  The return result has no other meaning than
 * that stated above, and implies nothing as to the relationship
 * between the two locales.  This is intended for use by
 * applications who wish to cache collators, or otherwise reuse
 * collators when possible.  The functional equivalent may change
 * over time.  For more information, please see the <a
 * href="http://icu-project.org/userguide/locale.html#services">
 * Locales and Services</a> section of the ICU User Guide.
 * @param result fillin for the functionally equivalent locale
 * @param resultCapacity capacity of the fillin buffer
 * @param keyword a particular keyword as enumerated by
 * ucol_getKeywords.
 * @param locale the requested locale
 * @param isAvailable if non-NULL, pointer to a fillin parameter that
 * indicates whether the requested locale was 'available' to the
 * collation service. A locale is defined as 'available' if it
 * physically exists within the collation locale data.
 * @param status pointer to input-output error code
 * @return the actual buffer size needed for the locale.  If greater
 * than resultCapacity, the returned full name will be truncated and
 * an error code will be returned.
 * @stable ICU 3.0
 */
U_STABLE int32_t U_EXPORT2
ucol_getFunctionalEquivalent(char* result, int32_t resultCapacity,
                             const char* keyword, const char* locale,
                             UBool* isAvailable, UErrorCode* status);

/**
 * Get the collation tailoring rules from a UCollator.
 * The rules will follow the rule syntax.
 * @param coll The UCollator to query.
 * @param length 
 * @return The collation tailoring rules.
 * @stable ICU 2.0
 */
U_STABLE const UChar* U_EXPORT2 
ucol_getRules(    const    UCollator    *coll, 
        int32_t            *length);

/** Get the short definition string for a collator. This API harvests the collator's
 *  locale and the attribute set and produces a string that can be used for opening 
 *  a collator with the same properties using the ucol_openFromShortString API.
 *  This string will be normalized.
 *  The structure and the syntax of the string is defined in the "Naming collators"
 *  section of the users guide: 
 *  http://icu-project.org/userguide/Collate_Concepts.html#Naming_Collators
 *  This API supports preflighting.
 *  @param coll a collator
 *  @param locale a locale that will appear as a collators locale in the resulting
 *                short string definition. If NULL, the locale will be harvested 
 *                from the collator.
 *  @param buffer space to hold the resulting string
 *  @param capacity capacity of the buffer
 *  @param status for returning errors. All the preflighting errors are featured
 *  @return length of the resulting string
 *  @see ucol_openFromShortString
 *  @see ucol_normalizeShortDefinitionString
 *  @stable ICU 3.0
 */
U_STABLE int32_t U_EXPORT2
ucol_getShortDefinitionString(const UCollator *coll,
                              const char *locale,
                              char *buffer,
                              int32_t capacity,
                              UErrorCode *status);

/** Verifies and normalizes short definition string.
 *  Normalized short definition string has all the option sorted by the argument name,
 *  so that equivalent definition strings are the same. 
 *  This API supports preflighting.
 *  @param source definition string
 *  @param destination space to hold the resulting string
 *  @param capacity capacity of the buffer
 *  @param parseError if not NULL, structure that will get filled with error's pre
 *                   and post context in case of error.
 *  @param status     Error code. This API will return an error if an invalid attribute 
 *                    or attribute/value combination is specified. All the preflighting 
 *                    errors are also featured
 *  @return length of the resulting normalized string.
 *
 *  @see ucol_openFromShortString
 *  @see ucol_getShortDefinitionString
 * 
 *  @stable ICU 3.0
 */

U_STABLE int32_t U_EXPORT2
ucol_normalizeShortDefinitionString(const char *source,
                                    char *destination,
                                    int32_t capacity,
                                    UParseError *parseError,
                                    UErrorCode *status);


/**
 * Get a sort key for a string from a UCollator.
 * Sort keys may be compared using <TT>strcmp</TT>.
 *
 * Like ICU functions that write to an output buffer, the buffer contents
 * is undefined if the buffer capacity (resultLength parameter) is too small.
 * Unlike ICU functions that write a string to an output buffer,
 * the terminating zero byte is counted in the sort key length.
 * @param coll The UCollator containing the collation rules.
 * @param source The string to transform.
 * @param sourceLength The length of source, or -1 if null-terminated.
 * @param result A pointer to a buffer to receive the attribute.
 * @param resultLength The maximum size of result.
 * @return The size needed to fully store the sort key.
 *      If there was an internal error generating the sort key,
 *      a zero value is returned.
 * @see ucol_keyHashCode
 * @stable ICU 2.0
 */
U_STABLE int32_t U_EXPORT2 
ucol_getSortKey(const    UCollator    *coll,
        const    UChar        *source,
        int32_t        sourceLength,
        uint8_t        *result,
        int32_t        resultLength);


/** Gets the next count bytes of a sort key. Caller needs
 *  to preserve state array between calls and to provide
 *  the same type of UCharIterator set with the same string.
 *  The destination buffer provided must be big enough to store
 *  the number of requested bytes.
 *
 *  The generated sort key may or may not be compatible with
 *  sort keys generated using ucol_getSortKey().
 *  @param coll The UCollator containing the collation rules.
 *  @param iter UCharIterator containing the string we need 
 *              the sort key to be calculated for.
 *  @param state Opaque state of sortkey iteration.
 *  @param dest Buffer to hold the resulting sortkey part
 *  @param count number of sort key bytes required.
 *  @param status error code indicator.
 *  @return the actual number of bytes of a sortkey. It can be
 *          smaller than count if we have reached the end of 
 *          the sort key.
 *  @stable ICU 2.6
 */
U_STABLE int32_t U_EXPORT2 
ucol_nextSortKeyPart(const UCollator *coll,
                     UCharIterator *iter,
                     uint32_t state[2],
                     uint8_t *dest, int32_t count,
                     UErrorCode *status);

/** enum that is taken by ucol_getBound API 
 * See below for explanation                
 * do not change the values assigned to the 
 * members of this enum. Underlying code    
 * depends on them having these numbers     
 * @stable ICU 2.0
 */
typedef enum {
  /** lower bound */
  UCOL_BOUND_LOWER = 0,
  /** upper bound that will match strings of exact size */
  UCOL_BOUND_UPPER = 1,
  /** upper bound that will match all the strings that have the same initial substring as the given string */
  UCOL_BOUND_UPPER_LONG = 2,
  UCOL_BOUND_VALUE_COUNT
} UColBoundMode;

/**
 * Produce a bound for a given sortkey and a number of levels.
 * Return value is always the number of bytes needed, regardless of 
 * whether the result buffer was big enough or even valid.<br>
 * Resulting bounds can be used to produce a range of strings that are
 * between upper and lower bounds. For example, if bounds are produced
 * for a sortkey of string "smith", strings between upper and lower 
 * bounds with one level would include "Smith", "SMITH", "sMiTh".<br>
 * There are two upper bounds that can be produced. If UCOL_BOUND_UPPER
 * is produced, strings matched would be as above. However, if bound
 * produced using UCOL_BOUND_UPPER_LONG is used, the above example will
 * also match "Smithsonian" and similar.<br>
 * For more on usage, see example in cintltst/capitst.c in procedure
 * TestBounds.
 * Sort keys may be compared using <TT>strcmp</TT>.
 * @param source The source sortkey.
 * @param sourceLength The length of source, or -1 if null-terminated. 
 *                     (If an unmodified sortkey is passed, it is always null 
 *                      terminated).
 * @param boundType Type of bound required. It can be UCOL_BOUND_LOWER, which 
 *                  produces a lower inclusive bound, UCOL_BOUND_UPPER, that 
 *                  produces upper bound that matches strings of the same length 
 *                  or UCOL_BOUND_UPPER_LONG that matches strings that have the 
 *                  same starting substring as the source string.
 * @param noOfLevels  Number of levels required in the resulting bound (for most 
 *                    uses, the recommended value is 1). See users guide for 
 *                    explanation on number of levels a sortkey can have.
 * @param result A pointer to a buffer to receive the resulting sortkey.
 * @param resultLength The maximum size of result.
 * @param status Used for returning error code if something went wrong. If the 
 *               number of levels requested is higher than the number of levels
 *               in the source key, a warning (U_SORT_KEY_TOO_SHORT_WARNING) is 
 *               issued.
 * @return The size needed to fully store the bound. 
 * @see ucol_keyHashCode
 * @stable ICU 2.1
 */
U_STABLE int32_t U_EXPORT2 
ucol_getBound(const uint8_t       *source,
        int32_t             sourceLength,
        UColBoundMode       boundType,
        uint32_t            noOfLevels,
        uint8_t             *result,
        int32_t             resultLength,
        UErrorCode          *status);
        
/**
 * Gets the version information for a Collator. Version is currently
 * an opaque 32-bit number which depends, among other things, on major
 * versions of the collator tailoring and UCA.
 * @param coll The UCollator to query.
 * @param info the version # information, the result will be filled in
 * @stable ICU 2.0
 */
U_STABLE void U_EXPORT2
ucol_getVersion(const UCollator* coll, UVersionInfo info);

/**
 * Gets the UCA version information for a Collator. Version is the
 * UCA version number (3.1.1, 4.0).
 * @param coll The UCollator to query.
 * @param info the version # information, the result will be filled in
 * @stable ICU 2.8
 */
U_STABLE void U_EXPORT2
ucol_getUCAVersion(const UCollator* coll, UVersionInfo info);

/**
 * Merges two sort keys. The levels are merged with their corresponding counterparts
 * (primaries with primaries, secondaries with secondaries etc.). Between the values
 * from the same level a separator is inserted.
 *
 * This is useful, for example, for combining sort keys from first and last names
 * to sort such pairs.
 * It is possible to merge multiple sort keys by consecutively merging
 * another one with the intermediate result.
 *
 * The length of the merge result is the sum of the lengths of the input sort keys.
 *
 * Example (uncompressed):
 * <pre>191B1D 01 050505 01 910505 00
 * 1F2123 01 050505 01 910505 00</pre>
 * will be merged as 
 * <pre>191B1D 02 1F2123 01 050505 02 050505 01 910505 02 910505 00</pre>
 *
 * If the destination buffer is not big enough, then its contents are undefined.
 * If any of source lengths are zero or any of the source pointers are NULL/undefined,
 * the result is of size zero.
 *
 * @param src1 the first sort key
 * @param src1Length the length of the first sort key, including the zero byte at the end;
 *        can be -1 if the function is to find the length
 * @param src2 the second sort key
 * @param src2Length the length of the second sort key, including the zero byte at the end;
 *        can be -1 if the function is to find the length
 * @param dest the buffer where the merged sort key is written,
 *        can be NULL if destCapacity==0
 * @param destCapacity the number of bytes in the dest buffer
 * @return the length of the merged sort key, src1Length+src2Length;
 *         can be larger than destCapacity, or 0 if an error occurs (only for illegal arguments),
 *         in which cases the contents of dest is undefined
 * @stable ICU 2.0
 */
U_STABLE int32_t U_EXPORT2 
ucol_mergeSortkeys(const uint8_t *src1, int32_t src1Length,
                   const uint8_t *src2, int32_t src2Length,
                   uint8_t *dest, int32_t destCapacity);

/**
 * Universal attribute setter
 * @param coll collator which attributes are to be changed
 * @param attr attribute type 
 * @param value attribute value
 * @param status to indicate whether the operation went on smoothly or there were errors
 * @see UColAttribute
 * @see UColAttributeValue
 * @see ucol_getAttribute
 * @stable ICU 2.0
 */
U_STABLE void U_EXPORT2 
ucol_setAttribute(UCollator *coll, UColAttribute attr, UColAttributeValue value, UErrorCode *status);

/**
 * Universal attribute getter
 * @param coll collator which attributes are to be changed
 * @param attr attribute type
 * @return attribute value
 * @param status to indicate whether the operation went on smoothly or there were errors
 * @see UColAttribute
 * @see UColAttributeValue
 * @see ucol_setAttribute
 * @stable ICU 2.0
 */
U_STABLE UColAttributeValue  U_EXPORT2 
ucol_getAttribute(const UCollator *coll, UColAttribute attr, UErrorCode *status);

/** Variable top
 * is a two byte primary value which causes all the codepoints with primary values that
 * are less or equal than the variable top to be shifted when alternate handling is set
 * to UCOL_SHIFTED.
 * Sets the variable top to a collation element value of a string supplied. 
 * @param coll collator which variable top needs to be changed
 * @param varTop one or more (if contraction) UChars to which the variable top should be set
 * @param len length of variable top string. If -1 it is considered to be zero terminated.
 * @param status error code. If error code is set, the return value is undefined. 
 *               Errors set by this function are: <br>
 *    U_CE_NOT_FOUND_ERROR if more than one character was passed and there is no such 
 *    a contraction<br>
 *    U_PRIMARY_TOO_LONG_ERROR if the primary for the variable top has more than two bytes
 * @return a 32 bit value containing the value of the variable top in upper 16 bits. 
 *         Lower 16 bits are undefined
 * @see ucol_getVariableTop
 * @see ucol_restoreVariableTop
 * @stable ICU 2.0
 */
U_STABLE uint32_t U_EXPORT2 
ucol_setVariableTop(UCollator *coll, 
                    const UChar *varTop, int32_t len, 
                    UErrorCode *status);

/** 
 * Gets the variable top value of a Collator. 
 * Lower 16 bits are undefined and should be ignored.
 * @param coll collator which variable top needs to be retrieved
 * @param status error code (not changed by function). If error code is set, 
 *               the return value is undefined.
 * @return the variable top value of a Collator.
 * @see ucol_setVariableTop
 * @see ucol_restoreVariableTop
 * @stable ICU 2.0
 */
U_STABLE uint32_t U_EXPORT2 ucol_getVariableTop(const UCollator *coll, UErrorCode *status);

/** 
 * Sets the variable top to a collation element value supplied. Variable top is 
 * set to the upper 16 bits. 
 * Lower 16 bits are ignored.
 * @param coll collator which variable top needs to be changed
 * @param varTop CE value, as returned by ucol_setVariableTop or ucol)getVariableTop
 * @param status error code (not changed by function)
 * @see ucol_getVariableTop
 * @see ucol_setVariableTop
 * @stable ICU 2.0
 */
U_STABLE void U_EXPORT2 
ucol_restoreVariableTop(UCollator *coll, const uint32_t varTop, UErrorCode *status);

/**
 * Thread safe cloning operation. The result is a clone of a given collator.
 * @param coll collator to be cloned
 * @param stackBuffer <em>Deprecated functionality as of ICU 52, use NULL.</em><br>
 * user allocated space for the new clone. 
 * If NULL new memory will be allocated. 
 *  If buffer is not large enough, new memory will be allocated.
 *  Clients can use the U_COL_SAFECLONE_BUFFERSIZE.
 * @param pBufferSize <em>Deprecated functionality as of ICU 52, use NULL or 1.</em><br>
 *  pointer to size of allocated space. 
 *  If *pBufferSize == 0, a sufficient size for use in cloning will 
 *  be returned ('pre-flighting')
 *  If *pBufferSize is not enough for a stack-based safe clone, 
 *  new memory will be allocated.
 * @param status to indicate whether the operation went on smoothly or there were errors
 *    An informational status value, U_SAFECLONE_ALLOCATED_ERROR, is used if any
 * allocations were necessary.
 * @return pointer to the new clone
 * @see ucol_open
 * @see ucol_openRules
 * @see ucol_close
 * @stable ICU 2.0
 */
U_STABLE UCollator* U_EXPORT2 
ucol_safeClone(const UCollator *coll,
               void            *stackBuffer,
               int32_t         *pBufferSize,
               UErrorCode      *status);

#ifndef U_HIDE_DEPRECATED_API

/** default memory size for the new clone.
 * @deprecated ICU 52. Do not rely on ucol_safeClone() cloning into any provided buffer.
 */
#define U_COL_SAFECLONE_BUFFERSIZE 1

#endif /* U_HIDE_DEPRECATED_API */

/**
 * Returns current rules. Delta defines whether full rules are returned or just the tailoring. 
 * Returns number of UChars needed to store rules. If buffer is NULL or bufferLen is not enough 
 * to store rules, will store up to available space.
 *
 * ucol_getRules() should normally be used instead.
 * See http://userguide.icu-project.org/collation/customization#TOC-Building-on-Existing-Locales
 * @param coll collator to get the rules from
 * @param delta one of UCOL_TAILORING_ONLY, UCOL_FULL_RULES. 
 * @param buffer buffer to store the result in. If NULL, you'll get no rules.
 * @param bufferLen length of buffer to store rules in. If less than needed you'll get only the part that fits in.
 * @return current rules
 * @stable ICU 2.0
 * @see UCOL_FULL_RULES
 */
U_STABLE int32_t U_EXPORT2 
ucol_getRulesEx(const UCollator *coll, UColRuleOption delta, UChar *buffer, int32_t bufferLen);

#ifndef U_HIDE_DEPRECATED_API
/**
 * gets the locale name of the collator. If the collator
 * is instantiated from the rules, then this function returns
 * NULL.
 * @param coll The UCollator for which the locale is needed
 * @param type You can choose between requested, valid and actual
 *             locale. For description see the definition of
 *             ULocDataLocaleType in uloc.h
 * @param status error code of the operation
 * @return real locale name from which the collation data comes. 
 *         If the collator was instantiated from rules, returns
 *         NULL.
 * @deprecated ICU 2.8 Use ucol_getLocaleByType instead
 */
U_DEPRECATED const char * U_EXPORT2
ucol_getLocale(const UCollator *coll, ULocDataLocaleType type, UErrorCode *status);
#endif  /* U_HIDE_DEPRECATED_API */

/**
 * gets the locale name of the collator. If the collator
 * is instantiated from the rules, then this function returns
 * NULL.
 * @param coll The UCollator for which the locale is needed
 * @param type You can choose between requested, valid and actual
 *             locale. For description see the definition of
 *             ULocDataLocaleType in uloc.h
 * @param status error code of the operation
 * @return real locale name from which the collation data comes. 
 *         If the collator was instantiated from rules, returns
 *         NULL.
 * @stable ICU 2.8
 */
U_STABLE const char * U_EXPORT2
ucol_getLocaleByType(const UCollator *coll, ULocDataLocaleType type, UErrorCode *status);

/**
 * Get an Unicode set that contains all the characters and sequences tailored in 
 * this collator. The result must be disposed of by using uset_close.
 * @param coll        The UCollator for which we want to get tailored chars
 * @param status      error code of the operation
 * @return a pointer to newly created USet. Must be be disposed by using uset_close
 * @see ucol_openRules
 * @see uset_close
 * @stable ICU 2.4
 */
U_STABLE USet * U_EXPORT2
ucol_getTailoredSet(const UCollator *coll, UErrorCode *status);

#ifndef U_HIDE_INTERNAL_API
/**
 * Universal attribute getter that returns UCOL_DEFAULT if the value is default
 * @param coll collator which attributes are to be changed
 * @param attr attribute type
 * @return attribute value or UCOL_DEFAULT if the value is default
 * @param status to indicate whether the operation went on smoothly or there were errors
 * @see UColAttribute
 * @see UColAttributeValue
 * @see ucol_setAttribute
 * @internal ICU 3.0
 */
U_INTERNAL UColAttributeValue  U_EXPORT2
ucol_getAttributeOrDefault(const UCollator *coll, UColAttribute attr, UErrorCode *status);

/** Check whether two collators are equal. Collators are considered equal if they
 *  will sort strings the same. This means that both the current attributes and the
 *  rules must be equivalent. Currently used for RuleBasedCollator::operator==.
 *  @param source first collator
 *  @param target second collator
 *  @return TRUE or FALSE
 *  @internal ICU 3.0
 */
U_INTERNAL UBool U_EXPORT2
ucol_equals(const UCollator *source, const UCollator *target);

/** Calculates the set of unsafe code points, given a collator.
 *   A character is unsafe if you could append any character and cause the ordering to alter significantly.
 *   Collation sorts in normalized order, so anything that rearranges in normalization can cause this.
 *   Thus if you have a character like a_umlaut, and you add a lower_dot to it,
 *   then it normalizes to a_lower_dot + umlaut, and sorts differently.
 *  @param coll Collator
 *  @param unsafe a fill-in set to receive the unsafe points
 *  @param status for catching errors
 *  @return number of elements in the set
 *  @internal ICU 3.0
 */
U_INTERNAL int32_t U_EXPORT2
ucol_getUnsafeSet( const UCollator *coll,
                  USet *unsafe,
                  UErrorCode *status);

/** Reset UCA's static pointers. You don't want to use this, unless your static memory can go away.
 * @internal ICU 3.2.1
 */
U_INTERNAL void U_EXPORT2
ucol_forgetUCA(void);

/** Touches all resources needed for instantiating a collator from a short string definition,
 *  thus filling up the cache.
 * @param definition A short string containing a locale and a set of attributes. 
 *                   Attributes not explicitly mentioned are left at the default
 *                   state for a locale.
 * @param parseError if not NULL, structure that will get filled with error's pre
 *                   and post context in case of error.
 * @param forceDefaults if FALSE, the settings that are the same as the collator 
 *                   default settings will not be applied (for example, setting
 *                   French secondary on a French collator would not be executed). 
 *                   If TRUE, all the settings will be applied regardless of the 
 *                   collator default value. If the definition
 *                   strings are to be cached, should be set to FALSE.
 * @param status     Error code. Apart from regular error conditions connected to 
 *                   instantiating collators (like out of memory or similar), this
 *                   API will return an error if an invalid attribute or attribute/value
 *                   combination is specified.
 * @see ucol_openFromShortString
 * @internal ICU 3.2.1
 */
U_INTERNAL void U_EXPORT2
ucol_prepareShortStringOpen( const char *definition,
                          UBool forceDefaults,
                          UParseError *parseError,
                          UErrorCode *status);
#endif  /* U_HIDE_INTERNAL_API */

/** Creates a binary image of a collator. This binary image can be stored and 
 *  later used to instantiate a collator using ucol_openBinary.
 *  This API supports preflighting.
 *  @param coll Collator
 *  @param buffer a fill-in buffer to receive the binary image
 *  @param capacity capacity of the destination buffer
 *  @param status for catching errors
 *  @return size of the image
 *  @see ucol_openBinary
 *  @stable ICU 3.2
 */
U_STABLE int32_t U_EXPORT2
ucol_cloneBinary(const UCollator *coll,
                 uint8_t *buffer, int32_t capacity,
                 UErrorCode *status);

/** Opens a collator from a collator binary image created using
 *  ucol_cloneBinary. Binary image used in instantiation of the 
 *  collator remains owned by the user and should stay around for 
 *  the lifetime of the collator. The API also takes a base collator
 *  which usualy should be UCA.
 *  @param bin binary image owned by the user and required through the
 *             lifetime of the collator
 *  @param length size of the image. If negative, the API will try to
 *                figure out the length of the image
 *  @param base fallback collator, usually UCA. Base is required to be
 *              present through the lifetime of the collator. Currently 
 *              it cannot be NULL.
 *  @param status for catching errors
 *  @return newly created collator
 *  @see ucol_cloneBinary
 *  @stable ICU 3.2
 */
U_STABLE UCollator* U_EXPORT2
ucol_openBinary(const uint8_t *bin, int32_t length, 
                const UCollator *base, 
                UErrorCode *status);


#endif /* #if !UCONFIG_NO_COLLATION */

#endif