// Licensed to the Apache Software Foundation (ASF) under one
// or more contributor license agreements.  See the NOTICE file
// distributed with this work for additional information
// regarding copyright ownership.  The ASF licenses this file
// to you under the Apache License, Version 2.0 (the
// "License"); you may not use this file except in compliance
// with the License.  You may obtain a copy of the License at
//
//   http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing,
// software distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
// KIND, either express or implied.  See the License for the
// specific language governing permissions and limitations
// under the License..

//! Native threads.

use crate::any::Any;
#[cfg(feature = "thread")]
use crate::cell::UnsafeCell;
use crate::ffi::{CStr, CString};
use crate::fmt;
#[cfg(feature = "thread")]
use crate::io;
#[cfg(feature = "thread")]
use crate::mem;
use crate::num::NonZeroU64;
#[cfg(feature = "thread")]
use crate::num::NonZeroUsize;
#[cfg(feature = "thread")]
use crate::panic;
use crate::panicking;
use crate::str;
use crate::sync::Arc;
#[cfg(feature = "thread")]
use crate::sys::thread as imp;
use crate::sys_common::mutex;
use crate::sys_common::thread_info;
use crate::sys_common::thread_parker::Parker;
#[cfg(feature = "thread")]
use crate::sys_common::{AsInner, IntoInner};
use crate::time::Duration;

use sgx_types::{sgx_thread_t, sgx_thread_self};
use sgx_trts::enclave::*;

pub use sgx_trts::enclave::SgxThreadPolicy;

////////////////////////////////////////////////////////////////////////////////
// Thread-local storage
////////////////////////////////////////////////////////////////////////////////

#[macro_use]
mod local;

pub use self::local::{AccessError, LocalKey};

pub use self::local::statik::Key as __StaticLocalKeyInner;
#[cfg(feature = "thread")]
pub use self::local::fast::Key as __FastLocalKeyInner;
#[cfg(feature = "thread")]
pub use self::local::os::Key as __OsLocalKeyInner;

// This is only used to make thread locals with `const { .. }` initialization
// expressions unstable. If and/or when that syntax is stabilized with thread
// locals this will simply be removed.
pub const fn require_unstable_const_init_thread_local() {}

////////////////////////////////////////////////////////////////////////////////
// Builder
////////////////////////////////////////////////////////////////////////////////

/// Thread factory, which can be used in order to configure the properties of
/// a new thread.
///
/// Methods can be chained on it in order to configure it.
///
/// The two configurations available are:
///
/// - [`name`]: specifies an [associated name for the thread][naming-threads]
///
/// The [`spawn`] method will take ownership of the builder and create an
/// [`io::Result`] to the thread handle with the given configuration.
///
/// The [`thread::spawn`] free function uses a `Builder` with default
/// configuration and [`unwrap`]s its return value.
///
/// You may want to use [`spawn`] instead of [`thread::spawn`], when you want
/// to recover from a failure to launch a thread, indeed the free function will
/// panic where the `Builder` method will return a [`io::Result`].
///
/// # Examples
///
/// ```
/// use std::thread;
///
/// let builder = thread::Builder::new();
///
/// let handler = builder.spawn(|| {
///     // thread code
/// }).unwrap();
///
/// handler.join().unwrap();
/// ```
///
/// [`stack_size`]: Builder::stack_size
/// [`name`]: Builder::name
/// [`spawn`]: Builder::spawn
/// [`thread::spawn`]: spawn
/// [`io::Result`]: crate::io::Result
/// [`unwrap`]: crate::result::Result::unwrap
/// [naming-threads]: ./index.html#naming-threads
#[cfg(feature = "thread")]
#[derive(Debug)]
pub struct Builder {
    // A name for the thread-to-be, for identification in panic messages
    name: Option<String>,
}

#[cfg(feature = "thread")]
impl Builder {
    /// Generates the base configuration for spawning a thread, from which
    /// configuration methods can be chained.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::thread;
    ///
    /// let builder = thread::Builder::new()
    ///                               .name("foo".into());
    ///
    ///
    /// let handler = builder.spawn(|| {
    ///     // thread code
    /// }).unwrap();
    ///
    /// handler.join().unwrap();
    /// ```
    pub fn new() -> Builder {
        if rsgx_get_thread_policy() != SgxThreadPolicy::Bound {
            panic!("The sgx thread policy must be Bound!");
        }
        Builder { name: None }
    }

    /// Names the thread-to-be. Currently the name is used for identification
    /// only in panic messages.
    ///
    /// The name must not contain null bytes (`\0`).
    ///
    /// For more information about named threads, see
    /// [this module-level documentation][naming-threads].
    ///
    /// # Examples
    ///
    /// ```
    /// use std::thread;
    ///
    /// let builder = thread::Builder::new()
    ///     .name("foo".into());
    ///
    /// let handler = builder.spawn(|| {
    ///     assert_eq!(thread::current().name(), Some("foo"))
    /// }).unwrap();
    ///
    /// handler.join().unwrap();
    /// ```
    ///
    /// [naming-threads]: ./index.html#naming-threads
    pub fn name(mut self, name: String) -> Builder {
        self.name = Some(name);
        self
    }

    /// Spawns a new thread by taking ownership of the `Builder`, and returns an
    /// [`io::Result`] to its [`JoinHandle`].
    ///
    /// The spawned thread may outlive the caller (unless the caller thread
    /// is the main thread; the whole process is terminated when the main
    /// thread finishes). The join handle can be used to block on
    /// termination of the spawned thread, including recovering its panics.
    ///
    /// For a more complete documentation see [`thread::spawn`][`spawn`].
    ///
    /// # Errors
    ///
    /// Unlike the [`spawn`] free function, this method yields an
    /// [`io::Result`] to capture any failure to create the thread at
    /// the OS level.
    ///
    /// [`io::Result`]: crate::io::Result
    ///
    /// # Panics
    ///
    /// Panics if a thread name was set and it contained null bytes.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::thread;
    ///
    /// let builder = thread::Builder::new();
    ///
    /// let handler = builder.spawn(|| {
    ///     // thread code
    /// }).unwrap();
    ///
    /// handler.join().unwrap();
    /// ```
    pub fn spawn<F, T>(self, f: F) -> io::Result<JoinHandle<T>>
    where
        F: FnOnce() -> T,
        F: Send + 'static,
        T: Send + 'static,
    {
        unsafe { self.spawn_unchecked(f) }
    }

    /// Spawns a new thread without any lifetime restrictions by taking ownership
    /// of the `Builder`, and returns an [`io::Result`] to its [`JoinHandle`].
    ///
    /// The spawned thread may outlive the caller (unless the caller thread
    /// is the main thread; the whole process is terminated when the main
    /// thread finishes). The join handle can be used to block on
    /// termination of the spawned thread, including recovering its panics.
    ///
    /// This method is identical to [`thread::Builder::spawn`][`Builder::spawn`],
    /// except for the relaxed lifetime bounds, which render it unsafe.
    /// For a more complete documentation see [`thread::spawn`][`spawn`].
    ///
    /// # Errors
    ///
    /// Unlike the [`spawn`] free function, this method yields an
    /// [`io::Result`] to capture any failure to create the thread at
    /// the OS level.
    ///
    /// # Panics
    ///
    /// Panics if a thread name was set and it contained null bytes.
    ///
    /// # Safety
    ///
    /// The caller has to ensure that no references in the supplied thread closure
    /// or its return type can outlive the spawned thread's lifetime. This can be
    /// guaranteed in two ways:
    ///
    /// - ensure that [`join`][`JoinHandle::join`] is called before any referenced
    /// data is dropped
    /// - use only types with `'static` lifetime bounds, i.e., those with no or only
    /// `'static` references (both [`thread::Builder::spawn`][`Builder::spawn`]
    /// and [`thread::spawn`][`spawn`] enforce this property statically)
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(thread_spawn_unchecked)]
    /// use std::thread;
    ///
    /// let builder = thread::Builder::new();
    ///
    /// let x = 1;
    /// let thread_x = &x;
    ///
    /// let handler = unsafe {
    ///     builder.spawn_unchecked(move || {
    ///         println!("x = {}", *thread_x);
    ///     }).unwrap()
    /// };
    ///
    /// // caller has to ensure `join()` is called, otherwise
    /// // it is possible to access freed memory if `x` gets
    /// // dropped before the thread closure is executed!
    /// handler.join().unwrap();
    /// ```
    ///
    /// [`io::Result`]: crate::io::Result
    pub unsafe fn spawn_unchecked<'a, F, T>(self, f: F) -> io::Result<JoinHandle<T>>
    where
        F: FnOnce() -> T,
        F: Send + 'a,
        T: Send + 'a,
    {
        let Builder { name } = self;

        let my_thread = SgxThread::new(name);
        let their_thread = my_thread.clone();

        let my_packet: Arc<UnsafeCell<Option<Result<T>>>> = Arc::new(UnsafeCell::new(None));
        let their_packet = my_packet.clone();

        let main = move || {
            if let Some(name) = their_thread.cname() {
                imp::Thread::set_name(name);
            }
            thread_info::set(their_thread);
            #[cfg(feature = "backtrace")]
            let try_result = panic::catch_unwind(panic::AssertUnwindSafe(|| {
                crate::sys_common::backtrace::__rust_begin_short_backtrace(f)
            }));
            #[cfg(not(feature = "backtrace"))]
            let try_result = panic::catch_unwind(panic::AssertUnwindSafe(f));
            // SAFETY: `their_packet` as been built just above and moved by the
            // closure (it is an Arc<...>) and `my_packet` will be stored in the
            // same `JoinInner` as this closure meaning the mutation will be
            // safe (not modify it and affect a value far away).
            *their_packet.get() = Some(try_result);
        };

        Ok(JoinHandle(JoinInner {
            // SAFETY:
            //
            // `imp::Thread::new` takes a closure with a `'static` lifetime, since it's passed
            // through FFI or otherwise used with low-level threading primitives that have no
            // notion of or way to enforce lifetimes.
            //
            // As mentioned in the `Safety` section of this function's documentation, the caller of
            // this function needs to guarantee that the passed-in lifetime is sufficiently long
            // for the lifetime of the thread.
            //
            // Similarly, the `sys` implementation must guarantee that no references to the closure
            // exist after the thread has terminated, which is signaled by `Thread::join`
            // returning.
            native: Some(imp::Thread::new(
                mem::transmute::<Box<dyn FnOnce() + 'a>, Box<dyn FnOnce() + 'static>>(
                    Box::new(main),
                ),          
            )?),
            thread: my_thread,
            packet: Packet(my_packet),
        }))
    }
}

////////////////////////////////////////////////////////////////////////////////
// Free functions
////////////////////////////////////////////////////////////////////////////////

/// Spawns a new thread, returning a [`JoinHandle`] for it.
///
/// The join handle provides a [`join`] method that can be used to join the spawned
/// thread. If the spawned thread panics, [`join`] will return an [`Err`] containing
/// the argument given to [`panic!`].
///
/// If the join handle is dropped, the spawned thread will implicitly be *detached*.
/// In this case, the spawned thread may no longer be joined.
/// (It is the responsibility of the program to either eventually join threads it
/// creates or detach them; otherwise, a resource leak will result.)
///
/// This call will create a thread using default parameters of [`Builder`], if you
/// want to specify the stack size or the name of the thread, use this API
/// instead.
///
/// As you can see in the signature of `spawn` there are two constraints on
/// both the closure given to `spawn` and its return value, let's explain them:
///
/// - The `'static` constraint means that the closure and its return value
///   must have a lifetime of the whole program execution. The reason for this
///   is that threads can outlive the lifetime they have been created in.
///
///   Indeed if the thread, and by extension its return value, can outlive their
///   caller, we need to make sure that they will be valid afterwards, and since
///   we *can't* know when it will return we need to have them valid as long as
///   possible, that is until the end of the program, hence the `'static`
///   lifetime.
/// - The [`Send`] constraint is because the closure will need to be passed
///   *by value* from the thread where it is spawned to the new thread. Its
///   return value will need to be passed from the new thread to the thread
///   where it is `join`ed.
///   As a reminder, the [`Send`] marker trait expresses that it is safe to be
///   passed from thread to thread. [`Sync`] expresses that it is safe to have a
///   reference be passed from thread to thread.
///
/// # Panics
///
/// Panics if the OS fails to create a thread; use [`Builder::spawn`]
/// to recover from such errors.
///
/// # Examples
///
/// Creating a thread.
///
/// ```
/// use std::thread;
///
/// let handler = thread::spawn(|| {
///     // thread code
/// });
///
/// handler.join().unwrap();
/// ```
///
/// As mentioned in the module documentation, threads are usually made to
/// communicate using [`channels`], here is how it usually looks.
///
/// This example also shows how to use `move`, in order to give ownership
/// of values to a thread.
///
/// ```
/// use std::thread;
/// use std::sync::mpsc::channel;
///
/// let (tx, rx) = channel();
///
/// let sender = thread::spawn(move || {
///     tx.send("Hello, thread".to_owned())
///         .expect("Unable to send on channel");
/// });
///
/// let receiver = thread::spawn(move || {
///     let value = rx.recv().expect("Unable to receive from channel");
///     println!("{}", value);
/// });
///
/// sender.join().expect("The sender thread has panicked");
/// receiver.join().expect("The receiver thread has panicked");
/// ```
///
/// A thread can also return a value through its [`JoinHandle`], you can use
/// this to make asynchronous computations (futures might be more appropriate
/// though).
///
/// ```
/// use std::thread;
///
/// let computation = thread::spawn(|| {
///     // Some expensive computation.
///     42
/// });
///
/// let result = computation.join().unwrap();
/// println!("{}", result);
/// ```
///
/// [`channels`]: crate::sync::mpsc
/// [`join`]: JoinHandle::join
/// [`Err`]: crate::result::Result::Err
#[cfg(feature = "thread")]
pub fn spawn<F, T>(f: F) -> JoinHandle<T>
where
    F: FnOnce() -> T,
    F: Send + 'static,
    T: Send + 'static,
{
    Builder::new().spawn(f).expect("failed to spawn thread")
}

/// Gets a handle to the thread that invokes it.
///
/// # Examples
///
/// Getting a handle to the current thread with `thread::current()`:
///
/// ```
/// use std::thread;
///
/// let handler = thread::Builder::new()
///     .name("named thread".into())
///     .spawn(|| {
///         let handle = thread::current();
///         assert_eq!(handle.name(), Some("named thread"));
///     })
///     .unwrap();
///
/// handler.join().unwrap();
/// ```
pub fn current() -> SgxThread {
    thread_info::current_thread().expect(
        "Use of thread::current() need TCS policy is bound",
    )
}

/// Cooperatively gives up a timeslice to the OS scheduler.
///
/// This calls the underlying OS scheduler's yield primitive, signaling
/// that the calling thread is willing to give up its remaining timeslice
/// so that the OS may schedule other threads on the CPU.
///
/// A drawback of yielding in a loop is that if the OS does not have any
/// other ready threads to run on the current CPU, the thread will effectively
/// busy-wait, which wastes CPU time and energy.
///
/// Therefore, when waiting for events of interest, a programmer's first
/// choice should be to use synchronization devices such as [`channel`]s,
/// [`Condvar`]s, [`Mutex`]es or [`join`] since these primitives are
/// implemented in a blocking manner, giving up the CPU until the event
/// of interest has occurred which avoids repeated yielding.
///
/// `yield_now` should thus be used only rarely, mostly in situations where
/// repeated polling is required because there is no other suitable way to
/// learn when an event of interest has occurred.
///
/// # Examples
///
/// ```
/// use std::thread;
///
/// thread::yield_now();
/// ```
///
/// [`channel`]: crate::sync::mpsc
/// [`join`]: JoinHandle::join
/// [`Condvar`]: crate::sync::Condvar
/// [`Mutex`]: crate::sync::Mutex
#[cfg(feature = "thread")]
pub fn yield_now() {
    imp::Thread::yield_now()
}

/// Determines whether the current thread is unwinding because of panic.
///
/// A common use of this feature is to poison shared resources when writing
/// unsafe code, by checking `panicking` when the `drop` is called.
///
/// This is usually not needed when writing safe code, as [`Mutex`es][Mutex]
/// already poison themselves when a thread panics while holding the lock.
///
/// This can also be used in multithreaded applications, in order to send a
/// message to other threads warning that a thread has panicked (e.g., for
/// monitoring purposes).
///
/// # Examples
///
/// ```should_panic
/// use std::thread;
///
/// struct SomeStruct;
///
/// impl Drop for SomeStruct {
///     fn drop(&mut self) {
///         if thread::panicking() {
///             println!("dropped while unwinding");
///         } else {
///             println!("dropped while not unwinding");
///         }
///     }
/// }
///
/// {
///     print!("a: ");
///     let a = SomeStruct;
/// }
///
/// {
///     print!("b: ");
///     let b = SomeStruct;
///     panic!()
/// }
/// ```
///
/// [Mutex]: crate::sync::Mutex
#[inline]
pub fn panicking() -> bool {
    panicking::panicking()
}

/// Puts the current thread to sleep for at least the specified amount of time.
///
/// The thread may sleep longer than the duration specified due to scheduling
/// specifics or platform-dependent functionality. It will never sleep less.
///
/// This function is blocking, and should not be used in `async` functions.
///
/// # Platform-specific behavior
///
/// On Unix platforms, the underlying syscall may be interrupted by a
/// spurious wakeup or signal handler. To ensure the sleep occurs for at least
/// the specified duration, this function may invoke that system call multiple
/// times.
///
/// # Examples
///
/// ```no_run
/// use std::thread;
///
/// // Let's sleep for 2 seconds:
/// thread::sleep_ms(2000);
/// ```
#[cfg(feature = "thread")]
pub fn sleep_ms(ms: u32) {
    sleep(Duration::from_millis(ms as u64))
}

/// Puts the current thread to sleep for at least the specified amount of time.
///
/// The thread may sleep longer than the duration specified due to scheduling
/// specifics or platform-dependent functionality. It will never sleep less.
///
/// This function is blocking, and should not be used in `async` functions.
///
/// # Platform-specific behavior
///
/// On Unix platforms, the underlying syscall may be interrupted by a
/// spurious wakeup or signal handler. To ensure the sleep occurs for at least
/// the specified duration, this function may invoke that system call multiple
/// times.
/// Platforms which do not support nanosecond precision for sleeping will
/// have `dur` rounded up to the nearest granularity of time they can sleep for.
///
/// Currently, specifying a zero duration on Unix platforms returns immediately
/// without invoking the underlying [`nanosleep`] syscall, whereas on Windows
/// platforms the underlying [`Sleep`] syscall is always invoked.
/// If the intention is to yield the current time-slice you may want to use
/// [`yield_now`] instead.
///
/// [`nanosleep`]: https://linux.die.net/man/2/nanosleep
/// [`Sleep`]: https://docs.microsoft.com/en-us/windows/win32/api/synchapi/nf-synchapi-sleep
///
/// # Examples
///
/// ```no_run
/// use std::{thread, time};
///
/// let ten_millis = time::Duration::from_millis(10);
/// let now = time::Instant::now();
///
/// thread::sleep(ten_millis);
///
/// assert!(now.elapsed() >= ten_millis);
/// ```
#[cfg(feature = "thread")]
pub fn sleep(dur: Duration) {
    imp::Thread::sleep(dur)
}

/// Blocks unless or until the current thread's token is made available.
///
/// A call to `park` does not guarantee that the thread will remain parked
/// forever, and callers should be prepared for this possibility.
///
/// # park and unpark
///
/// Every thread is equipped with some basic low-level blocking support, via the
/// [`thread::park`][`park`] function and [`thread::Thread::unpark`][`unpark`]
/// method. [`park`] blocks the current thread, which can then be resumed from
/// another thread by calling the [`unpark`] method on the blocked thread's
/// handle.
///
/// Conceptually, each [`Thread`] handle has an associated token, which is
/// initially not present:
///
/// * The [`thread::park`][`park`] function blocks the current thread unless or
///   until the token is available for its thread handle, at which point it
///   atomically consumes the token. It may also return *spuriously*, without
///   consuming the token. [`thread::park_timeout`] does the same, but allows
///   specifying a maximum time to block the thread for.
///
/// * The [`unpark`] method on a [`Thread`] atomically makes the token available
///   if it wasn't already. Because the token is initially absent, [`unpark`]
///   followed by [`park`] will result in the second call returning immediately.
///
/// In other words, each [`Thread`] acts a bit like a spinlock that can be
/// locked and unlocked using `park` and `unpark`.
///
/// Notice that being unblocked does not imply any synchronization with someone
/// that unparked this thread, it could also be spurious.
/// For example, it would be a valid, but inefficient, implementation to make both [`park`] and
/// [`unpark`] return immediately without doing anything.
///
/// The API is typically used by acquiring a handle to the current thread,
/// placing that handle in a shared data structure so that other threads can
/// find it, and then `park`ing in a loop. When some desired condition is met, another
/// thread calls [`unpark`] on the handle.
///
/// The motivation for this design is twofold:
///
/// * It avoids the need to allocate mutexes and condvars when building new
///   synchronization primitives; the threads already provide basic
///   blocking/signaling.
///
/// * It can be implemented very efficiently on many platforms.
///
/// # Examples
///
/// ```
/// use std::thread;
/// use std::sync::{Arc, atomic::{Ordering, AtomicBool}};
/// use std::time::Duration;
///
/// let flag = Arc::new(AtomicBool::new(false));
/// let flag2 = Arc::clone(&flag);
///
/// let parked_thread = thread::spawn(move || {
///     // We want to wait until the flag is set. We *could* just spin, but using
///     // park/unpark is more efficient.
///     while !flag2.load(Ordering::Acquire) {
///         println!("Parking thread");
///         thread::park();
///         // We *could* get here spuriously, i.e., way before the 10ms below are over!
///         // But that is no problem, we are in a loop until the flag is set anyway.
///         println!("Thread unparked");
///     }
///     println!("Flag received");
/// });
///
/// // Let some time pass for the thread to be spawned.
/// thread::sleep(Duration::from_millis(10));
///
/// // Set the flag, and let the thread wake up.
/// // There is no race condition here, if `unpark`
/// // happens first, `park` will return immediately.
/// // Hence there is no risk of a deadlock.
/// flag.store(true, Ordering::Release);
/// println!("Unpark the thread");
/// parked_thread.thread().unpark();
///
/// parked_thread.join().unwrap();
/// ```
///
/// [`unpark`]: Thread::unpark
/// [`thread::park_timeout`]: park_timeout
pub fn park() {
    // SAFETY: park_timeout is called on the parker owned by this thread.
    unsafe {
        current().inner.parker.park();
    }
}

/// Use [`park_timeout`].
///
/// Blocks unless or until the current thread's token is made available or
/// the specified duration has been reached (may wake spuriously).
///
/// The semantics of this function are equivalent to [`park`] except
/// that the thread will be blocked for roughly no longer than `dur`. This
/// method should not be used for precise timing due to anomalies such as
/// preemption or platform differences that might not cause the maximum
/// amount of time waited to be precisely `ms` long.
///
/// See the [park documentation][`park`] for more detail.
pub fn park_timeout_ms(ms: u32) {
    park_timeout(Duration::from_millis(ms as u64))
}

/// Blocks unless or until the current thread's token is made available or
/// the specified duration has been reached (may wake spuriously).
///
/// The semantics of this function are equivalent to [`park`][park] except
/// that the thread will be blocked for roughly no longer than `dur`. This
/// method should not be used for precise timing due to anomalies such as
/// preemption or platform differences that might not cause the maximum
/// amount of time waited to be precisely `dur` long.
///
/// See the [park documentation][park] for more details.
///
/// # Platform-specific behavior
///
/// Platforms which do not support nanosecond precision for sleeping will have
/// `dur` rounded up to the nearest granularity of time they can sleep for.
///
/// # Examples
///
/// Waiting for the complete expiration of the timeout:
///
/// ```rust,no_run
/// use std::thread::park_timeout;
/// use std::time::{Instant, Duration};
///
/// let timeout = Duration::from_secs(2);
/// let beginning_park = Instant::now();
///
/// let mut timeout_remaining = timeout;
/// loop {
///     park_timeout(timeout_remaining);
///     let elapsed = beginning_park.elapsed();
///     if elapsed >= timeout {
///         break;
///     }
///     println!("restarting park_timeout after {:?}", elapsed);
///     timeout_remaining = timeout - elapsed;
/// }
/// ```
pub fn park_timeout(dur: Duration) {
    // SAFETY: park_timeout is called on the parker owned by this thread.
    unsafe {
        current().inner.parker.park_timeout(dur);
    }
}

////////////////////////////////////////////////////////////////////////////////
// ThreadId
////////////////////////////////////////////////////////////////////////////////

/// A unique identifier for a running thread.
///
/// A `ThreadId` is an opaque object that has a unique value for each thread
/// that creates one. `ThreadId`s are not guaranteed to correspond to a thread's
/// system-designated identifier. A `ThreadId` can be retrieved from the [`id`]
/// method on a [`Thread`].
///
/// # Examples
///
/// ```
/// use std::thread;
///
/// let other_thread = thread::spawn(|| {
///     thread::current().id()
/// });
///
/// let other_thread_id = other_thread.join().unwrap();
/// assert!(thread::current().id() != other_thread_id);
/// ```
///
/// [`id`]: Thread::id
#[derive(Eq, PartialEq, Clone, Copy, Hash, Debug)]
pub struct ThreadId(NonZeroU64);

impl ThreadId {
    // Generate a new unique thread ID.
    fn new() -> ThreadId {
        // It is UB to attempt to acquire this mutex reentrantly!
        static GUARD: mutex::SgxThreadMutex = mutex::SgxThreadMutex::new();
        static mut COUNTER: u64 = 1;

        unsafe {
            let _guard = GUARD.lock();

            // If we somehow use up all our bits, panic so that we're not
            // covering up subtle bugs of IDs being reused.
            if COUNTER == u64::MAX {
                panic!("failed to generate unique thread ID: bitspace exhausted");
            }

            let id = COUNTER;
            COUNTER += 1;
            let _ = GUARD.unlock();

            ThreadId(NonZeroU64::new(id).unwrap())
        }
    }

    /// This returns a numeric identifier for the thread identified by this
    /// `ThreadId`.
    ///
    /// As noted in the documentation for the type itself, it is essentially an
    /// opaque ID, but is guaranteed to be unique for each thread. The returned
    /// value is entirely opaque -- only equality testing is stable. Note that
    /// it is not guaranteed which values new threads will return, and this may
    /// change across Rust versions.
    pub fn as_u64(&self) -> NonZeroU64 {
        self.0
    }
}

////////////////////////////////////////////////////////////////////////////////
// Thread
////////////////////////////////////////////////////////////////////////////////

/// The internal representation of a `Thread` handle
struct Inner {
    name: Option<CString>, // Guaranteed to be UTF-8
    id: ThreadId,
    parker: Parker,
}

#[derive(Clone)]
/// A handle to a thread.
///
/// Threads are represented via the `Thread` type, which you can get in one of
/// two ways:
///
/// * By spawning a new thread, e.g., using the [`thread::spawn`][`spawn`]
///   function, and calling [`thread`][`JoinHandle::thread`] on the
///   [`JoinHandle`].
/// * By requesting the current thread, using the [`thread::current`] function.
///
/// The [`thread::current`] function is available even for threads not spawned
/// by the APIs of this module.
///
/// There is usually no need to create a `Thread` struct yourself, one
/// should instead use a function like `spawn` to create new threads, see the
/// docs of [`Builder`] and [`spawn`] for more details.
///
/// [`thread::current`]: current
pub struct SgxThread {
    inner: Arc<Inner>,
}

impl SgxThread {
    // Used only internally to construct a thread object without spawning
    // Panics if the name contains nuls.
    pub(crate) fn new(name: Option<String>) -> SgxThread {
        let cname =
            name.map(|n| CString::new(n).expect("thread name may not contain interior null bytes"));
        SgxThread {
            inner: Arc::new(Inner { name: cname, id: ThreadId::new(), parker: Parker::new() }),
        }
    }

    /// Atomically makes the handle's token available if it is not already.
    ///
    /// Every thread is equipped with some basic low-level blocking support, via
    /// the [`park`][park] function and the `unpark()` method. These can be
    /// used as a more CPU-efficient implementation of a spinlock.
    ///
    /// See the [park documentation][park] for more details.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::thread;
    /// use std::time::Duration;
    ///
    /// let parked_thread = thread::Builder::new()
    ///     .spawn(|| {
    ///         println!("Parking thread");
    ///         thread::park();
    ///         println!("Thread unparked");
    ///     })
    ///     .unwrap();
    ///
    /// // Let some time pass for the thread to be spawned.
    /// thread::sleep(Duration::from_millis(10));
    ///
    /// println!("Unpark the thread");
    /// parked_thread.thread().unpark();
    ///
    /// parked_thread.join().unwrap();
    /// ```
    #[inline]
    pub fn unpark(&self) {
        self.inner.parker.unpark();
    }

    /// Gets the thread's unique identifier.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::thread;
    ///
    /// let other_thread = thread::spawn(|| {
    ///     thread::current().id()
    /// });
    ///
    /// let other_thread_id = other_thread.join().unwrap();
    /// assert!(thread::current().id() != other_thread_id);
    /// ```
    pub fn id(&self) -> ThreadId {
        self.inner.id
    }

    /// Gets the thread's name.
    ///
    /// For more information about named threads, see
    /// [this module-level documentation][naming-threads].
    ///
    /// # Examples
    ///
    /// Threads by default have no name specified:
    ///
    /// ```
    /// use std::thread;
    ///
    /// let builder = thread::Builder::new();
    ///
    /// let handler = builder.spawn(|| {
    ///     assert!(thread::current().name().is_none());
    /// }).unwrap();
    ///
    /// handler.join().unwrap();
    /// ```
    ///
    /// Thread with a specified name:
    ///
    /// ```
    /// use std::thread;
    ///
    /// let builder = thread::Builder::new()
    ///     .name("foo".into());
    ///
    /// let handler = builder.spawn(|| {
    ///     assert_eq!(thread::current().name(), Some("foo"))
    /// }).unwrap();
    ///
    /// handler.join().unwrap();
    /// ```
    ///
    /// [naming-threads]: ./index.html#naming-threads
    pub fn name(&self) -> Option<&str> {
        self.cname().map(|s| unsafe { str::from_utf8_unchecked(s.to_bytes()) })
    }

    fn cname(&self) -> Option<&CStr> {
        self.inner.name.as_deref()
    }
}

impl fmt::Debug for SgxThread {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.debug_struct("SgxThread")
            .field("id", &self.id())
            .field("name", &self.name())
            .finish_non_exhaustive()
    }
}

////////////////////////////////////////////////////////////////////////////////
// JoinHandle
////////////////////////////////////////////////////////////////////////////////

/// A specialized [`Result`] type for threads.
///
/// Indicates the manner in which a thread exited.
///
/// The value contained in the `Result::Err` variant
/// is the value the thread panicked with;
/// that is, the argument the `panic!` macro was called with.
/// Unlike with normal errors, this value doesn't implement
/// the [`Error`](crate::error::Error) trait.
///
/// Thus, a sensible way to handle a thread panic is to either:
///
/// 1. propagate the panic with [`std::panic::resume_unwind`]
/// 2. or in case the thread is intended to be a subsystem boundary
/// that is supposed to isolate system-level failures,
/// match on the `Err` variant and handle the panic in an appropriate way
///
/// A thread that completes without panicking is considered to exit successfully.
///
/// # Examples
///
/// Matching on the result of a joined thread:
///
/// ```no_run
/// use std::{fs, thread, panic};
///
/// fn copy_in_thread() -> thread::Result<()> {
///     thread::spawn(|| {
///         fs::copy("foo.txt", "bar.txt").unwrap();
///     }).join()
/// }
///
/// fn main() {
///     match copy_in_thread() {
///         Ok(_) => println!("copy succeeded"),
///         Err(e) => panic::resume_unwind(e),
///     }
/// }
/// ```
///
/// [`Result`]: crate::result::Result
/// [`std::panic::resume_unwind`]: crate::panic::resume_unwind
pub type Result<T> = crate::result::Result<T, Box<dyn Any + Send + 'static>>;

// This packet is used to communicate the return value between the spawned thread
// and the rest of the program. Memory is shared through the `Arc` within and there's
// no need for a mutex here because synchronization happens with `join()` (the
// caller will never read this packet until the thread has exited).
//
// This packet itself is then stored into a `JoinInner` which in turns is placed
// in `JoinHandle` and `JoinGuard`. Due to the usage of `UnsafeCell` we need to
// manually worry about impls like Send and Sync. The type `T` should
// already always be Send (otherwise the thread could not have been created) and
// this type is inherently Sync because no methods take &self. Regardless,
// however, we add inheriting impls for Send/Sync to this type to ensure it's
// Send/Sync and that future modifications will still appropriately classify it.
#[cfg(feature = "thread")]
struct Packet<T>(Arc<UnsafeCell<Option<Result<T>>>>);

#[cfg(feature = "thread")]
unsafe impl<T: Send> Send for Packet<T> {}
#[cfg(feature = "thread")]
unsafe impl<T: Sync> Sync for Packet<T> {}

/// Inner representation for JoinHandle
#[cfg(feature = "thread")]
struct JoinInner<T> {
    native: Option<imp::Thread>,
    thread: SgxThread,
    packet: Packet<T>,
}

#[cfg(feature = "thread")]
impl<T> JoinInner<T> {
    fn join(&mut self) -> Result<T> {
        self.native.take().unwrap().join();
        unsafe { (*self.packet.0.get()).take().unwrap() }
    }
}

/// An owned permission to join on a thread (block on its termination).
///
/// A `JoinHandle` *detaches* the associated thread when it is dropped, which
/// means that there is no longer any handle to thread and no way to `join`
/// on it.
///
/// Due to platform restrictions, it is not possible to [`Clone`] this
/// handle: the ability to join a thread is a uniquely-owned permission.
///
/// This `struct` is created by the [`thread::spawn`] function and the
/// [`thread::Builder::spawn`] method.
///
/// # Examples
///
/// Creation from [`thread::spawn`]:
///
/// ```
/// use std::thread;
///
/// let join_handle: thread::JoinHandle<_> = thread::spawn(|| {
///     // some work here
/// });
/// ```
///
/// Creation from [`thread::Builder::spawn`]:
///
/// ```
/// use std::thread;
///
/// let builder = thread::Builder::new();
///
/// let join_handle: thread::JoinHandle<_> = builder.spawn(|| {
///     // some work here
/// }).unwrap();
/// ```
///
/// A thread being detached and outliving the thread that spawned it:
///
/// ```no_run
/// use std::thread;
/// use std::time::Duration;
///
/// let original_thread = thread::spawn(|| {
///     let _detached_thread = thread::spawn(|| {
///         // Here we sleep to make sure that the first thread returns before.
///         thread::sleep(Duration::from_millis(10));
///         // This will be called, even though the JoinHandle is dropped.
///         println!("♫ Still alive ♫");
///     });
/// });
///
/// original_thread.join().expect("The thread being joined has panicked");
/// println!("Original thread is joined.");
///
/// // We make sure that the new thread has time to run, before the main
/// // thread returns.
///
/// thread::sleep(Duration::from_millis(1000));
/// ```
///
/// [`thread::Builder::spawn`]: Builder::spawn
/// [`thread::spawn`]: spawn
#[cfg(feature = "thread")]
pub struct JoinHandle<T>(JoinInner<T>);

#[cfg(feature = "thread")]
unsafe impl<T> Send for JoinHandle<T> {}
#[cfg(feature = "thread")]
unsafe impl<T> Sync for JoinHandle<T> {}

#[cfg(feature = "thread")]
impl<T> JoinHandle<T> {
    /// Extracts a handle to the underlying thread.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::thread;
    ///
    /// let builder = thread::Builder::new();
    ///
    /// let join_handle: thread::JoinHandle<_> = builder.spawn(|| {
    ///     // some work here
    /// }).unwrap();
    ///
    /// let thread = join_handle.thread();
    /// println!("thread id: {:?}", thread.id());
    /// ```
    pub fn thread(&self) -> &SgxThread {
        &self.0.thread
    }

    /// Waits for the associated thread to finish.
    ///
    /// This function will return immediately if the associated thread has already finished.
    ///
    /// In terms of [atomic memory orderings],  the completion of the associated
    /// thread synchronizes with this function returning. In other words, all
    /// operations performed by that thread [happen
    /// before](https://doc.rust-lang.org/nomicon/atomics.html#data-accesses) all
    /// operations that happen after `join` returns.
    ///
    /// If the associated thread panics, [`Err`] is returned with the parameter given
    /// to [`panic!`].
    ///
    /// [`Err`]: crate::result::Result::Err
    /// [atomic memory orderings]: crate::sync::atomic
    ///
    /// # Panics
    ///
    /// This function may panic on some platforms if a thread attempts to join
    /// itself or otherwise may create a deadlock with joining threads.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::thread;
    ///
    /// let builder = thread::Builder::new();
    ///
    /// let join_handle: thread::JoinHandle<_> = builder.spawn(|| {
    ///     // some work here
    /// }).unwrap();
    /// join_handle.join().expect("Couldn't join on the associated thread");
    /// ```
    pub fn join(mut self) -> Result<T> {
        self.0.join()
    }
}

#[cfg(feature = "thread")]
impl<T> AsInner<imp::Thread> for JoinHandle<T> {
    fn as_inner(&self) -> &imp::Thread {
        self.0.native.as_ref().unwrap()
    }
}

#[cfg(feature = "thread")]
impl<T> IntoInner<imp::Thread> for JoinHandle<T> {
    fn into_inner(self) -> imp::Thread {
        self.0.native.unwrap()
    }
}

#[cfg(feature = "thread")]
impl<T> fmt::Debug for JoinHandle<T> {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        f.debug_struct("JoinHandle").finish_non_exhaustive()
    }
}

#[cfg(feature = "thread")]
fn _assert_sync_and_send() {
    fn _assert_both<T: Send + Sync>() {}
    _assert_both::<JoinHandle<()>>();
    _assert_both::<SgxThread>();
}

/// Returns the number of hardware threads available to the program.
///
/// This value should be considered only a hint.
///
/// # Platform-specific behavior
///
/// If interpreted as the number of actual hardware threads, it may undercount on
/// Windows systems with more than 64 hardware threads. If interpreted as the
/// available concurrency for that process, it may overcount on Windows systems
/// when limited by a process wide affinity mask or job object limitations, and
/// it may overcount on Linux systems when limited by a process wide affinity
/// mask or affected by cgroups limits.
///
/// # Errors
///
/// This function will return an error in the following situations, but is not
/// limited to just these cases:
///
/// - If the number of hardware threads is not known for the target platform.
/// - The process lacks permissions to view the number of hardware threads
///   available.
///
/// # Examples
///
/// ```
/// # #![allow(dead_code)]
/// #![feature(available_concurrency)]
/// use std::thread;
///
/// let count = thread::available_concurrency().map(|n| n.get()).unwrap_or(1);
/// ```
#[cfg(feature = "thread")]
pub fn available_concurrency() -> io::Result<NonZeroUsize> {
    imp::available_concurrency()
}

///
/// The rsgx_thread_self function returns the unique thread identification.
///
/// # Description
///
/// The function is a simple wrap of get_thread_data() provided in the tRTS,
/// which provides a trusted thread unique identifier.
///
/// # Requirements
///
/// Library: libsgx_tstdc.a
///
/// # Return value
///
/// The return value cannot be NULL and is always valid as long as it is invoked by a thread inside the enclave.
///
pub fn rsgx_thread_self() -> sgx_thread_t {
    unsafe { sgx_thread_self() }
}

///
/// The rsgx_thread_equal function compares two thread identifiers.
///
/// # Description
///
/// The function compares two thread identifiers provided by sgx_thread_
/// self to determine if the IDs refer to the same trusted thread.
///
/// # Requirements
///
/// Library: libsgx_tstdc.a
///
/// # Return value
///
/// **true**
///
/// The two thread IDs are equal.
///
pub fn rsgx_thread_equal(a: sgx_thread_t, b: sgx_thread_t) -> bool {
    a == b
}

pub fn current_td() -> SgxThreadData {
    unsafe {
        SgxThreadData::from_raw(rsgx_thread_self())
    }
}

#[inline]
pub fn thread_policy() -> SgxThreadPolicy {
    rsgx_get_thread_policy()
}