| /* |
| Licensed to the Apache Software Foundation (ASF) under one or more |
| contributor license agreements. See the NOTICE file distributed with |
| this work for additional information regarding copyright ownership. |
| The ASF licenses this file to You under the Apache License, Version 2.0 |
| (the "License"); you may not use this file except in compliance with |
| the License. You may obtain a copy of the License at |
| |
| http://www.apache.org/licenses/LICENSE-2.0 |
| |
| Unless required by applicable law or agreed to in writing, software |
| distributed under the License is distributed on an "AS IS" BASIS, |
| WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| See the License for the specific language governing permissions and |
| limitations under the License. |
| */ |
| |
| const PONYMAIL_URL_RE = new RegExp("(" + "(?:(?:[a-z]+)://)" + "(?:\\S+(?::\\S*)?@)?" + "(?:" + "([01][0-9][0-9]|2[0-4][0-9]|25[0-5])" + "|" + "(?:(?:[a-z\\u00a1-\\uffff0-9]-*)*[a-z\\u00a1-\\uffff0-9]+)" + "(?:\\.(?:[a-z\\u00a1-\\uffff0-9]-*)*[a-z\\u00a1-\\uffff0-9]+)*" + "(?:\\.(?:[a-z\\u00a1-\\uffff]{2,}))" + "\\.?" + ")" + "(?::\\d{2,5})?" + "\\/?" + "(?:[/?#]?([^,<>()\\[\\] \\t\\r\\n]|(<[^:\\s]*?>|\\([^:\\s]*?\\)|\\[[^:\\s]*?\\]))*)?" + ")\\.?" + "\\b", "mi"); |
| |
| // Regex for things to potentially put inside quote objects: |
| // - quotes |
| // - forwarded emails |
| // - inline quoting |
| // - top posting with original email following |
| const PONYMAIL_QUOTE_RE = new RegExp("(" + |
| // Typical encapsulation of context by ticketing systems and/or bug trackers |
| "(---\\r?\\n([^\\r\\n]*?\\r?\\n)*?---$)|" + |
| "(" + |
| "(?:\\r?\\n|^)" + // start of line or after a colon |
| // Classic method; a signal line and the quote with '>' starting each line quoted |
| "(" + |
| "(" + // Initial line signalling a quote |
| "((\\d+-\\d+-\\d+)\\s+.+<\\S+@\\S+>:[ \t\r\n]+)|" + // "01-02-1982 Foo Bar <foo@bar.baz>:" OR |
| "(on\\s+(.+|.+\\n.+)\\s+wrote:[\r?\n]+)|" + // "On $somedate, $someone wrote:", OR... |
| "(le\\s+(.+|.+\\n.+)\\s+écrit:[\r?\n]+)|" + // French version of the above, OR... |
| "(.?am .+? schrieb\\s+.+:[\r?\n]+)|" + // German version of the above, OR... |
| "(envoy[ée] de mon .+|sent from my .+|von meinem .+ gesendet)[ \t\r\n]+" + // "sent from my iphone/ipad/android phone/whatever", usually means the next part is a quote. |
| ")" + // End initial signal line |
| "(^$)*" + // Accept blank newlines following it... |
| "(((^(?!>)[\\s\\S]+$)*)|(^\\s*>[\\s\\S]+$)*)" + // Either text that follows immediately after with no '>' first, OR text with '>' first, but NOT both... |
| ")|" + |
| "(" + |
| // Lines after the signal line; comes in one shape, generally speaking... |
| "(^\\s*>+[ \\t]*[^\r\n]*\r*\n+)+" + // Lines beginning with one or more '>' after the initial signal line |
| ")" + |
| ")+|" + //OR... |
| "(" + |
| "^(-{5,10}) .+? \\1[\r\n]+" + // ----- Forwarded Message ----- |
| "(^\\w+:\\s+.+[\r\n]+){3,10}[\r\n]+" + // Between three and ten header fields (we ask for at least 3, so as to not quote PGP blocks) |
| "[\\S\\s]+" + // Whatever comes next... |
| ")+" + |
| ")", "mi"); |
| |
| // Somewhat simplified method for catching email footers/trailers that we don't need |
| const PONYMAIL_TRAILER_RE = new RegExp("^--[\r\n]+.*", "mi"); //(--\r?\n([^\r\n]*?\r?\n){1,6}$)|[\r\n.]+^((--+ \r?\n|--+\r?\n|__+\r?\n|--+\\s*[^\r\n]+\\s*--+\r?\n)(.*\r?\n)+)+$", "m"); |
| |
| // This is a regex for capturing code diff blocks in an email |
| const PONYMAIL_DIFF_RE = new RegExp( |
| "(" + |
| "^-{3} .+?[\r\n]+" + // Starts with a "--- /foo/bar/baz" |
| "^\\+{3} .+?[\r\n]+" + // Then a "+++ /foo/bar/baz" |
| "(" + // Then one or more of... |
| "^@@@? .+[\r\n]+" + // positioning |
| "(^ .*[\r\n]*$){0,3}" + // diff header |
| "(^[-+ ].*[\r\n]*)+" + // actual diff |
| "(^ .*[\r\n]*$){0,3}" + // diff trailer |
| ")+" + |
| ")", "mi"); |
| |
| // Function for turning URLs into <a> tags |
| function fixup_urls(splicer) { |
| |
| if (typeof splicer == 'object') { |
| return splicer; |
| //splicer = splicer.innerText; |
| } |
| /* Array holding text and links */ |
| let i, m, t, textbits, url, urls; |
| textbits = []; |
| |
| /* Find the first link, if any */ |
| i = splicer.search(PONYMAIL_URL_RE); |
| urls = 0; |
| |
| /* While we have more links, ... */ |
| while (i !== -1) { |
| urls++; |
| |
| /* Only parse the first 250 URLs... srsly */ |
| if (urls > 250) { |
| break; |
| } |
| |
| /* Text preceding the link? add it to textbits frst */ |
| if (i > 0) { |
| t = splicer.substr(0, i); |
| textbits.push(t); |
| splicer = splicer.substr(i); |
| } |
| |
| /* Find the URL and cut it out as a link */ |
| m = splicer.match(PONYMAIL_URL_RE); |
| if (m) { |
| url = m[1]; |
| i = url.length; |
| t = splicer.substr(0, i); |
| textbits.push(new HTML('a', { |
| href: url |
| }, url)); |
| splicer = splicer.substr(i); |
| } |
| |
| /* Find the next link */ |
| i = splicer.search(PONYMAIL_URL_RE); |
| } |
| |
| /* push the remaining text into textbits */ |
| textbits.push(splicer); |
| return textbits; |
| } |
| |
| |
| // Simple check to (attempt to) assess whether a trailer should |
| // remain or get cut out. |
| function legit_trailer(a) { |
| let lines = a.split(/\s*\r?\n/); |
| let first_line = lines.shift(); |
| while (first_line.length == 0 && lines.length) first_line = lines.shift(); // get first meaningful line |
| if (!lines.length || first_line == '--') return ''; // likely a simple trailer |
| let last_line = lines.pop(); |
| while (last_line.length == 0 && lines.length) last_line = lines.pop(); // get last meaningful line |
| |
| // Check if first and last line are similar, which is usually indictive of a ticket system |
| if (last_line == first_line) { |
| return a; |
| } |
| // Otherwise, check if first line has two or more dashes, and it occurs again later (also tix) |
| if (first_line.match(/^---+/) && lines.has(first_line)) { |
| return "|||" + a + "|||"; |
| } |
| |
| // Lastly, if there is "sufficient" length to the dashes, allow (JIRA etc) |
| if (first_line.match(/^-{6,72}$/)) return a; |
| return ''; |
| } |
| |
| // Function for cutting away trailers |
| function cut_trailer(splicer) { |
| if (!G_chatty_layout) return splicer; // only invoke in social rendering mode |
| if (typeof splicer == 'object') { |
| splicer.innerText = splicer.innerText.replace(PONYMAIL_TRAILER_RE, legit_trailer, 3); |
| } else { |
| splicer = splicer.replace(PONYMAIL_TRAILER_RE, legit_trailer); |
| |
| } |
| return splicer; |
| } |
| |
| function color_diff_lines(diff) { |
| let lines = diff.split(/[\r\n]+/); |
| let ret = []; |
| for (let z = 0; z < lines.length; z++) { |
| let line = lines[z]; |
| let color = 'grey'; |
| if (line[0] == '@') color = 'blue'; |
| if (line[0] == '-') color = 'red'; |
| if (line[0] == '+') color = 'green'; |
| if (line[0] == ' ') color = 'black'; |
| let el = new HTML('span', { |
| style: { |
| color: color |
| } |
| }, line); |
| ret.push(el); |
| ret.push(new HTML('br')); |
| } |
| return ret; |
| } |
| |
| // Function for coloring diffs |
| function fixup_diffs(splicer) { |
| if (!G_chatty_layout) return splicer; // only invoke in social rendering mode |
| if (typeof splicer == 'object') { |
| splicer = splicer.innerText; |
| } |
| /* Array holding text and links */ |
| let i, m, t, diff, diffs; |
| let textbits = []; |
| |
| /* Find the first link, if any */ |
| i = splicer.search(PONYMAIL_DIFF_RE); |
| diffs = 0; |
| |
| /* While we have more links, ... */ |
| while (i !== -1) { |
| diffs++; |
| |
| /* Only parse the first 20 diffs... srsly */ |
| if (diffs > 25) { |
| break; |
| } |
| console.log(i); |
| /* Text preceding the diff? add it to textbits frst */ |
| if (i > 0) { |
| t = splicer.substr(0, i); |
| textbits.push(t); |
| splicer = splicer.substr(i); |
| } |
| |
| /* Find the URL and cut it out as a link */ |
| m = splicer.match(PONYMAIL_DIFF_RE); |
| if (m) { |
| diff = m[1]; |
| i = diff.length; |
| t = splicer.substr(0, i); |
| textbits.push(new HTML('pre', { |
| class: 'diff' |
| }, color_diff_lines(diff))); |
| splicer = splicer.substr(i); |
| } |
| |
| /* Find the next link */ |
| i = splicer.search(PONYMAIL_DIFF_RE); |
| } |
| |
| /* push the remaining text into textbits */ |
| textbits.push(splicer); |
| return textbits; |
| } |
| |
| // Function for turning quotes into quote segments |
| function fixup_quotes(splicer) { |
| if (splicer[splicer.length - 1] !== "\n") splicer += "\n"; //tweak to make quotes match the last line if no newline on it. |
| let hideQuotes, i, m, qdiv, quote, quotes, t, textbits; |
| hideQuotes = true; |
| if (prefs.compactQuotes === false && !G_chatty_layout) { |
| hideQuotes = false; |
| } |
| if (!hideQuotes) return splicer; // We'll bail here for now. Dunno why not. |
| |
| /* Array holding text and quotes */ |
| textbits = []; |
| |
| /* Find the first quote, if any */ |
| i = splicer.search(PONYMAIL_QUOTE_RE); |
| quotes = 0; |
| |
| /* While we have more quotes, ... */ |
| while (i !== -1) { |
| quotes++; |
| |
| /* Only parse the first 50 quotes... srsly */ |
| if (quotes > 50) { |
| break; |
| } |
| |
| /* Text preceding the quote? add it to textbits first */ |
| if (i > 0) { |
| t = splicer.substr(0, i); |
| let diffed = fixup_diffs(cut_trailer(t)); |
| if (isArray(diffed)) { |
| for (let z = 0; z < diffed.length; z++) textbits.push(fixup_urls(diffed[z])); |
| } else textbits.push(fixup_urls(diffed)); |
| splicer = splicer.substr(i); |
| } |
| |
| /* Find the quote and cut it out as a div */ |
| m = splicer.match(PONYMAIL_QUOTE_RE); |
| if (m) { |
| quote = m[0]; |
| i = quote.length; |
| t = splicer.substr(0, i); |
| quote = quote.replace(/(>*\s*\r?\n)+$/g, ""); |
| qdiv = new HTML('div', { |
| "class": "email_quote_parent" |
| }, [ |
| new HTML('button', { |
| title: "Toggle quote", |
| onclick: "toggle_quote(this)" |
| }, new HTML('span', { |
| class: 'glyphicon glyphicon-comment' |
| }, " ")), new HTML('br'), new HTML('blockquote', { |
| "class": "email_quote", |
| style: { |
| display: hideQuotes ? 'none' : 'block' |
| } |
| }, fixup_urls(quote)) |
| ]); |
| textbits.push(qdiv); |
| splicer = splicer.substr(i); |
| } |
| |
| /* Find the next quotes */ |
| i = splicer.search(PONYMAIL_QUOTE_RE); |
| } |
| |
| /* push the remaining text into textbits */ |
| let diffed = fixup_diffs(cut_trailer(splicer)); |
| if (isArray(diffed)) { |
| for (let z = 0; z < diffed.length; z++) diffed[z] = fixup_urls(diffed[z]); |
| } else diffed = fixup_urls(diffed); |
| textbits.push(new HTML('span', {}, diffed)); |
| |
| return textbits; |
| } |
| |
| function toggle_quote(el) { |
| let quote = el.parentNode.childNodes[2]; |
| if (quote.style.display != 'block') { |
| quote.style.display = 'block'; |
| } else { |
| quote.style.display = 'none'; |
| } |
| } |
