# This is Brooklyn's dot-properties file.
# It should be located at "~/.brooklyn/brooklyn.properties" for automatic loading,
# or can be specified as a CLI option with --localProperties /path/to/these.properties.

##################################  Welcome!  ############################################

# It's great to have you here.

# Getting Started options have been pulled to the top. There's a formatting guide at the
# very bottom.

############################ Getting Started Options  ####################################

# By default we have AWS set up (but with invalid credentials!).  Many, many other
# providers are supported.

## Amazon EC2 Credentials
# These should be an "Access Key ID" and "Secret Access Key" for your account.
# This is configured at https://console.aws.amazon.com/iam/home?#security_credential .

brooklyn.location.jclouds.aws-ec2.identity = AKA_YOUR_ACCESS_KEY_ID
brooklyn.location.jclouds.aws-ec2.credential = <access-key-hex-digits>

# Beware of trailing spaces in your cloud credentials. This will cause unexpected
# 401: unauthorized responses.

## Using Other Clouds
# 1. Cast your eyes down this document to find your preferred cloud in the Named Locations
#    section, and the examples.
# 2. Uncomment the relevant line(s) for your provider.
# 3. ADD  -.identity and -.credential lines for your provider, similar to the AWS ones above,
#    replacing 'aws-ec2' with jcloud's id for your cloud.


## Deploying to Localhost
## see: brooklyncentral.github.io/use/guide/locations/
#
## ~/.ssh/id_rsa is Brooklyn's default location
# brooklyn.location.localhost.privateKeyFile = ~/.ssh/id_rsa
## Passphrases are supported, but not required
# brooklyn.location.localhost.privateKeyPassphrase = s3cr3tpassphrase

## Geoscaling Service - used for the Global Web Fabric demo
## see: brooklyncentral.github.io/use/examples/global-web-fabric/ and
## https://www.geoscaling.com/dns2/
## other services may take similar configuration similarly; or can usually be set in YAML
# brooklyn.geoscaling.username = USERNAME
# brooklyn.geoscaling.password = PASSWORD
# brooklyn.geoscaling.primaryDomain = DOMAIN


##########################  Getting Started Complete!  ###################################

# That's it, although you may want to read through these options...

################################ Brooklyn Options ########################################

## Brooklyn Management Base Directory: specify where management data should be stored on this server;
## ~/.brooklyn/ is the default but you could use something like /opt/brooklyn/state/
## (provided this process has write permissions) 
# brooklyn.base.dir=~/.brooklyn/

## Brooklyn On-Box Directory: specify where data should be stored on managed hosts; 
## for most locations a directory off home is the default (but using /tmp/brooklyn-user/ on localhost),
## however you could specify something like /opt/brooklyn-managed-process/ (creation and permissions are handled)
# onbox.base.dir=~/brooklyn-managed-process/


## GUI Security
## NOTE: in production it is highly recommended to set this, as otherwise it will not require login,
## not will it be encrypted (though for safety if security is not set it will only bind to loopback)
# brooklyn.webconsole.security.https.required=true
# brooklyn.webconsole.security.users=admin,bob
# brooklyn.webconsole.security.user.admin.password=password
# brooklyn.webconsole.security.user.bob.password=bobsword

## GUI Security: Allow all - if you know what you are doing! (You can also plug in e.g. LDAP security.)
# brooklyn.webconsole.security.provider = brooklyn.rest.security.provider.AnyoneSecurityProvider

## Optionally disallow deployment to localhost (or any other location)
# brooklyn.location.localhost.enabled=false

## Scripting Behaviour

## keep scripts around after running them (usually in /tmp) 
# brooklyn.ssh.config.noDeleteAfterExec = true

## Misc Cloud Settings
## brooklyn will fail a node if the cloud machine doesn't come up, but you can tell it to retry:
# brooklyn.location.jclouds.machineCreateAttempts = 3
## many cloud machines don't have sufficient entropy for lots of encrypted networking, so fake it:
# brooklyn.location.jclouds.installDevUrandom=true

## Sets a minimium ram property for all jclouds locations. Recommended to avoid getting m1.micros on AWS!
brooklyn.location.jclouds.minRam = 2048

## When setting up a new cloud machine Brooklyn creates a user with the same name as the user running
## Brooklyn on the management server, but you can force a different user here:
# brooklyn.location.jclouds.user=brooklyn
## And you can force a password or key (by default it will use the keys in ~/.ssh/id_rsa{,.pub}
# brooklyn.location.jclouds.password=s3cr3t

################################ Named Locations ########################################

# Named locations appear in the web console. If using the command line or YAML it may be 
# just as easy to use the jclouds:<provider> locations and specify additional properties there.

## Example: AWS Virginia using Rightscale 6.3 64bit Centos AMI and Large Instances
# brooklyn.location.named.aws-va-centos-large = jclouds:aws-ec2:us-east-1
# brooklyn.location.named.aws-va-centos-large.imageId=us-east-1/ami-7d7bfc14
# brooklyn.location.named.aws-va-centos-large.user=brooklyn
# brooklyn.location.named.aws-va-centos-large.minRam=4096

## You can also nest these:
# brooklyn.location.named.aws-acct-two = jclouds:aws-ec2
# brooklyn.location.named.aws-acct-two.identity = AKA_ACCT_TWO
# brooklyn.location.named.aws-acct-two.credential = <access-key-hex-digits>
# brooklyn.location.named.aws-acct-two-singapore = named:aws-acct-two
# brooklyn.location.named.aws-acct-two-singapore.region = ap-southeast-1
# brooklyn.location.named.aws-acct-two-singapore.displayName = AWS Singapore (Acct Two)

# For convenience some common defaults:
brooklyn.location.named.aws-california = jclouds:aws-ec2:us-west-1
brooklyn.location.named.aws-oregon = jclouds:aws-ec2:us-west-2
brooklyn.location.named.aws-ireland = jclouds:aws-ec2:eu-west-1
brooklyn.location.named.aws-tokyo = jclouds:aws-ec2:ap-northeast-1

## Google Compute
## Note at present you have to create and download the P12 key from the Google "APIs & auth -> Registered Apps" interface,
## then convert to PEM private key format using  `openssl pkcs12 -in Certificates.p12 -out Certificates.pem -nodes`
## then embed that on one line as the 'credential, replacing new lines with \n as below
## (hopefully this will be improved in jclouds in the future)
# brooklyn.location.jclouds.google-compute-engine.identity=1234567890-somet1mesArand0mU1Dhere@developer.gserviceaccount.com
# brooklyn.location.jclouds.google-compute-engine.credential=-----BEGIN PRIVATE KEY----- \nMIIblahablahblah \nblahblahblah \n-----END PRIVATE KEY-----
# brooklyn.location.named.Google\ US = jclouds:google-compute-engine
# brooklyn.location.named.Google\ US.region=us-central1-a
# brooklyn.location.named.Google\ EU = jclouds:google-compute-engine
# brooklyn.location.named.Google\ EU.region=europe-west1-a
## the following flags for GCE are recommended
## specify the network to use - otherwise it creates new networks each time and you hit quotas pretty quickly
## you may have to manually create this network AND enable a firewall rule EG  tcp:1-65535;udp:1-65535;icmp  
## (fix for this is in progress)
# brooklyn.location.jclouds.google-compute-engine.networkName=brooklyn-default-network
## gce images have bad entropy, this ensures they have noisy /dev/random (even if the "randomness" is not quite as random)
# brooklyn.location.jclouds.google-compute-engine.installDevUrandom=true
## gce images often start with iptables turned on; turn it off 
# brooklyn.location.jclouds.google-compute-engine.stopIptables=true

## HP Cloud - also Ubuntu 12.04 LTS
## You specify your HP Credentials like this:
# brooklyn.location.jclouds.hpcloud-compute.identity = projectname:username
# brooklyn.location.jclouds.hpcloud-compute.credential = password
## where username and password are the same as logging in to the web console, and
## projectname can be found here: https://account.hpcloud.com/projects
#�brooklyn.location.named.HP\ Cloud\ Arizona-1 = jclouds:hpcloud-compute:az-1.region-a.geo-1
# brooklyn.location.named.HP\ Cloud\ Arizona-1.imageId = az-1.region-a.geo-1/75845
# brooklyn.location.named.HP\ Cloud\ Arizona-1.user = ubuntu

## Softlayer - need a key from the gui, under "administrative -> user administration -> api-access 
# brooklyn.location.jclouds.softlayer.identity=username
# brooklyn.location.jclouds.softlayer.credential=<private-key-hex-digits>
## A sample good image, available in all regions
# brooklyn.location.jclouds.softlayer.imageId=13945
## locations
# brooklyn.location.named.Softlayer\ Seattle=jclouds:softlayer:sea01
# brooklyn.location.named.Softlayer\ Dallas=jclouds:softlayer:dal05
# brooklyn.location.named.Softlayer\ Washington\ DC=jclouds:softlayer:wdc01
# brooklyn.location.named.Softlayer\ Singapore\ 1=jclouds:softlayer:sng01
# brooklyn.location.named.Softlayer\ Amsterdam\ 1=jclouds:softlayer:ams01


## Brooklyn uses the jclouds multi-cloud library to access many clouds.
## http://www.jclouds.org/documentation/reference/supported-providers/

## Templates for many other clouds, but remember to add identity and credentials:

# brooklyn.location.named.Bluelock = jclouds:bluelock-vcloud-zone01

# brooklyn.location.named.CloudSigma\ Nevada = jclouds:cloudsigma-lvs
# brooklyn.location.named.CloudSigma\ Zurich = jclouds:cloudsigma-zrh

# brooklyn.location.named.ElasticHosts\ London = jclouds:elastichosts-lon-p
# brooklyn.location.named.ElasticHosts\ Texas = jclouds:elastichosts-sat-p

# brooklyn.location.named.GleSYS = jclouds:glesys

# brooklyn.location.named.Go2Cloud = jclouds:go2cloud-jhb1

# brooklyn.location.named.GoGrid = jclouds:gogrid

# brooklyn.location.named.Green\ House\ Data = jclouds:greenhousedata-element-vcloud

# brooklyn.location.named.Ninefold = jclouds:ninefold-compute

# brooklyn.location.named.OpenHosting = jclouds:openhosting-east1

# brooklyn.location.named.Rackspace\ Chicago\ (ord) = jclouds:rackspace-cloudservers-us:ORD
# brooklyn.location.named.Rackspace\ Dallas\ (dfw) = jclouds:rackspace-cloudservers-us:DFW
# brooklyn.location.named.Rackspace\ Hong\ Kong\ (hkg) = jclouds:rackspace-cloudservers-us:HKG
# brooklyn.location.named.Rackspace\ Northern\ Virginia\ (iad) = jclouds:rackspace-cloudservers-us:IAD
# brooklyn.location.named.Rackspace\ Sydney\ (syd) = jclouds:rackspace-cloudservers-us:SYD
## for UK you will need a separate account with rackspace.co.uk
# brooklyn.location.named.Rackspace\ London\ (lon) = jclouds:rackspace-cloudservers-uk

## if you need to use Rackspace "first gen" API
## (note the "next gen" api configured above seems to be faster)
# brooklyn.location.jclouds.cloudservers-us.identity = YOURAPIKEY
# brooklyn.location.jclouds.cloudservers-us.credential = YOURSECRETKEY
# brooklyn.location.named.Rackspace\ US\ (First Gen) = jclouds:cloudservers-us
## and as with next gen, first gen requires a separate acct for the UK:
# brooklyn.location.jclouds.cloudservers-uk.identity = YOURAPIKEY
# brooklyn.location.jclouds.cloudservers-uk.credential = YOURSECRETKEY
# brooklyn.location.named.Rackspace\ UK\ (First Gen) = jclouds:cloudservers-uk

# brooklyn.location.named.SeverLove = jclouds:serverlove-z1-man

# brooklyn.location.named.SkaliCloud = jclouds:skalicloud-sdg-my

# brooklyn.location.named.Stratogen = jclouds:stratogen-vcloud-mycloud

# brooklyn.location.named.TryStack\ (Openstack) = jclouds:trystack-nova


## Production pool of machines for my application (deploy to named:On-Prem\ Iron\ Example)
# brooklyn.location.named.On-Prem\ Iron\ Example=byon:(hosts="10.9.1.1,10.9.1.2,produser2@10.9.2.{10,11,20-29}")
# brooklyn.location.named.On-Prem\ Iron\ Example.user=produser1
# brooklyn.location.named.On-Prem\ Iron\ Example.privateKeyFile=~/.ssh/produser_id_rsa
# brooklyn.location.named.On-Prem\ Iron\ Example.privateKeyPassphrase=s3cr3tpassphrase

## Various Private Clouds

## openstack identity and credential are random strings of letters and numbers (TBC - still the case?)
# brooklyn.location.named.My\ Openstack=jclouds:openstack-nova:https://9.9.9.9:9999/v2.0/

## cloudstack identity and credential are rather long random strings of letters and numbers
## you generate this in the cloudstack gui, under accounts, then "view users", then "generate key"
## use the "api key" as the identity and "secret key" as the credential
# brooklyn.location.named.My\ Cloudstack=jclouds:cloudstack:http://9.9.9.9:9999/client/api/

## abiquo identity and credential are your login username/passed
# brooklyn.location.named.My\ Abiquo=jclouds:abiquo:http://demonstration.abiquo.com/api/

###############################  Formatting Guide  #######################################

! Both # and ! mark lines as comments
# The follow syntax are ALL valid.
# example_key example_value
# example_key : example_value
# example_key = example_value
# example_key=example_value

# The backslash below tells Brooklyn to continue reading the value onto the next line.
# example_key = A very \
#          	long string!
# Note all white space before 'long...' is ignored. Also '!' is kept as part of the string


# Keys with spaces should be escaped with backslashes.
# This is useful for named locations, as the name displayed in Brooklyn's web
# interface is derived from the key name.
# key\ with\ spaces = some\ value

# Encoding for .properties must be ISO-8859-1, aka Latin-1.
# All non-latin1 characters must be entered using unicode escape characters
# polish_pangram = P\u00F3jd\u017A\u017Ce, ki\u0144 \
#                  t\u0119 chmurno\u015B\u0107 w g\u0142\u0105b flaszy!