blob: 9e63575d394cc37dbd4d4a7abd094f7980862bf3 [file] [log] [blame]
#!/usr/bin/env bash
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#set -x
ulimit -n 1024
### Setup some variables.
### BUILD_URL is set by Hudson if it is run by patch process
### Read variables from properties file
bindir=$(dirname $0)
# Defaults
if [ -z "$MAVEN_HOME" ]; then
MVN=mvn
else
MVN=$MAVEN_HOME/bin/mvn
fi
PROJECT_NAME=Atlas
JENKINS=false
PATCH_DIR=/tmp
BASEDIR=$(pwd)
PS=${PS:-ps}
AWK=${AWK:-awk}
WGET=${WGET:-wget}
GIT=${GIT:-git}
GREP=${GREP:-grep}
PATCH=${PATCH:-patch}
DIFF=${DIFF:-diff}
JIRACLI=${JIRA:-jira}
FINDBUGS_HOME=${FINDBUGS_HOME}
###############################################################################
printUsage() {
echo "Usage: $0 [options] patch-file | defect-number"
echo
echo "Where:"
echo " patch-file is a local patch file containing the changes to test"
echo " defect-number is a JIRA defect number (e.g. 'ATLAS-1234') to test (Jenkins only)"
echo
echo "Options:"
echo "--patch-dir=<dir> The directory for working and output files (default '/tmp')"
echo "--basedir=<dir> The directory to apply the patch to (default current directory)"
echo "--mvn-cmd=<cmd> The 'mvn' command to use (default \$MAVEN_HOME/bin/mvn, or 'mvn')"
echo "--ps-cmd=<cmd> The 'ps' command to use (default 'ps')"
echo "--awk-cmd=<cmd> The 'awk' command to use (default 'awk')"
echo "--git-cmd=<cmd> The 'git' command to use (default 'git')"
echo "--grep-cmd=<cmd> The 'grep' command to use (default 'grep')"
echo "--patch-cmd=<cmd> The 'patch' command to use (default 'patch')"
echo "--diff-cmd=<cmd> The 'diff' command to use (default 'diff')"
echo "--findbugs-home=<path> Findbugs home directory (default FINDBUGS_HOME environment variable)"
echo "--dirty-workspace Allow the local git workspace to have uncommitted changes"
echo "--run-tests Run all tests below the base directory"
echo
echo "Jenkins-only options:"
echo "--jenkins Run by Jenkins (runs tests and posts results to JIRA)"
echo "--wget-cmd=<cmd> The 'wget' command to use (default 'wget')"
echo "--jira-cmd=<cmd> The 'jira' command to use (default 'jira')"
echo "--jira-password=<pw> The password for the 'jira' command"
}
###############################################################################
parseArgs() {
for i in $*
do
case $i in
--jenkins)
JENKINS=true
;;
--patch-dir=*)
PATCH_DIR=${i#*=}
;;
--basedir=*)
BASEDIR=${i#*=}
;;
--mvn-cmd=*)
MVN=${i#*=}
;;
--ps-cmd=*)
PS=${i#*=}
;;
--awk-cmd=*)
AWK=${i#*=}
;;
--wget-cmd=*)
WGET=${i#*=}
;;
--git-cmd=*)
GIT=${i#*=}
;;
--grep-cmd=*)
GREP=${i#*=}
;;
--patch-cmd=*)
PATCH=${i#*=}
;;
--diff-cmd=*)
DIFF=${i#*=}
;;
--jira-cmd=*)
JIRACLI=${i#*=}
;;
--jira-password=*)
JIRA_PASSWD=${i#*=}
;;
--findbugs-home=*)
FINDBUGS_HOME=${i#*=}
;;
--dirty-workspace)
DIRTY_WORKSPACE=true
;;
--run-tests)
RUN_TESTS=true
;;
*)
PATCH_OR_DEFECT=$i
;;
esac
done
if [ -z "$PATCH_OR_DEFECT" ]; then
printUsage
exit 1
fi
if [[ $JENKINS == "true" ]] ; then
echo "Running in Jenkins mode"
defect=$PATCH_OR_DEFECT
else
echo "Running in developer mode"
JENKINS=false
### PATCH_FILE contains the location of the patchfile
PATCH_FILE=$PATCH_OR_DEFECT
if [[ ! -e "$PATCH_FILE" ]] ; then
echo "Unable to locate the patch file $PATCH_FILE"
cleanupAndExit 0
fi
### Check if $PATCH_DIR exists. If it does not exist, create a new directory
if [[ ! -e "$PATCH_DIR" ]] ; then
mkdir "$PATCH_DIR"
if [[ $? == 0 ]] ; then
echo "$PATCH_DIR has been created"
else
echo "Unable to create $PATCH_DIR"
cleanupAndExit 0
fi
fi
### Obtain the patch filename to append it to the version number
defect=`basename $PATCH_FILE`
fi
}
###############################################################################
checkout () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Testing patch for ${defect}."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
### When run by a developer, if the workspace contains modifications, do not continue
### unless the --dirty-workspace option was set
status=`$GIT status --porcelain`
if [[ $JENKINS == "false" ]] ; then
if [[ "$status" != "" && -z $DIRTY_WORKSPACE ]] ; then
echo "ERROR: can't run in a workspace that contains the following modifications"
echo "$status"
cleanupAndExit 1
fi
echo
else
cd $BASEDIR
$GIT reset --hard
$GIT clean -xdf
$GIT checkout master
$GIT pull --rebase
fi
GIT_REVISION=`git rev-parse --verify --short HEAD`
return $?
}
###############################################################################
downloadPatch () {
### Download latest patch file (ignoring .htm and .html) when run from patch process
if [[ $JENKINS == "true" ]] ; then
$WGET -q -O $PATCH_DIR/jira http://issues.apache.org/jira/browse/$defect
if [[ `$GREP -c 'Patch Available' $PATCH_DIR/jira` == 0 ]] ; then
echo "$defect is not \"Patch Available\". Exiting."
cleanupAndExit 0
fi
relativePatchURL=`$GREP -o '"/jira/secure/attachment/[0-9]*/[^"]*' $PATCH_DIR/jira | $GREP -v -e 'htm[l]*$' | sort | tail -1 | $GREP -o '/jira/secure/attachment/[0-9]*/[^"]*'`
patchURL="http://issues.apache.org${relativePatchURL}"
patchNum=`echo $patchURL | $GREP -o '[0-9]*/' | $GREP -o '[0-9]*'`
echo "$defect patch is being downloaded at `date` from"
echo "$patchURL"
$WGET -q -O $PATCH_DIR/patch $patchURL
VERSION=${GIT_REVISION}_${defect}_PATCH-${patchNum}
JIRA_COMMENT="Here are the results of testing the latest attachment
$patchURL
against master revision ${GIT_REVISION}."
### Copy the patch file to $PATCH_DIR
else
VERSION=PATCH-${defect}
cp $PATCH_FILE $PATCH_DIR/patch
if [[ $? == 0 ]] ; then
echo "Patch file $PATCH_FILE copied to $PATCH_DIR"
else
echo "Could not copy $PATCH_FILE to $PATCH_DIR"
cleanupAndExit 0
fi
fi
}
###############################################################################
verifyPatch () {
# Before building, check to make sure that the patch is valid
$bindir/smart-apply-patch.sh $PATCH_DIR/patch dryrun
if [[ $? != 0 ]] ; then
echo "PATCH APPLICATION FAILED"
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 patch{color}. The patch command could not apply the patch."
return 1
else
return 0
fi
}
###############################################################################
prebuildWithoutPatch () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Pre-build master to verify master stability and javac warnings"
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "Compiling $(pwd)"
echo "$MVN clean test -DskipTests > $PATCH_DIR/masterJavacWarnings.txt 2>&1"
$MVN clean test -DskipTests > $PATCH_DIR/masterJavacWarnings.txt 2>&1
if [[ $? != 0 ]] ; then
echo "master compilation is broken?"
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 patch{color}. master compilation may be broken."
return 1
fi
echo "$MVN clean test javadoc:javadoc -DskipTests > $PATCH_DIR/masterJavadocWarnings.txt 2>&1"
$MVN clean test javadoc:javadoc -DskipTests > $PATCH_DIR/masterJavadocWarnings.txt 2>&1
if [[ $? != 0 ]] ; then
echo "master javadoc compilation is broken?"
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 patch{color}. master compilation may be broken."
return 1
fi
return 0
}
###############################################################################
### Check for @author tags in the patch
checkAuthor () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Checking there are no @author tags in the patch."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
authorTags=`$GREP -c -i '@author' $PATCH_DIR/patch`
echo "There appear to be $authorTags @author tags in the patch."
if [[ $authorTags != 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 @author{color}. The patch appears to contain $authorTags @author tags which the Atlas community has agreed to not allow in code contributions."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 @author{color}. The patch does not contain any @author tags."
return 0
}
###############################################################################
### Check for tests in the patch
checkTests () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Checking there are new or changed tests in the patch."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
testReferences=`$GREP -c -i -e '^+++.*/test' $PATCH_DIR/patch`
echo "There appear to be $testReferences test files referenced in the patch."
if [[ $testReferences == 0 ]] ; then
if [[ $JENKINS == "true" ]] ; then
patchIsDoc=`$GREP -c -i 'title="documentation' $PATCH_DIR/jira`
if [[ $patchIsDoc != 0 ]] ; then
echo "The patch appears to be a documentation patch that doesn't require tests."
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+0 tests included{color}. The patch appears to be a documentation patch that doesn't require tests."
return 0
fi
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 tests included{color}. The patch doesn't appear to include any new or modified tests.
Please justify why no new tests are needed for this patch.
Also please list what manual steps were performed to verify this patch."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 tests included{color}. The patch appears to include $testReferences new or modified test files."
return 0
}
cleanUpXml () {
if [ -d "${BASEDIR}/conf" ]
then
cd $BASEDIR/conf
for file in `ls *.xml.template`
do
if [ -f "${file}" ]
then
rm -f `basename ${file} .template`
fi
done
cd $BASEDIR
fi
}
###############################################################################
### Attempt to apply the patch
applyPatch () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Applying patch."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
export PATCH
$bindir/smart-apply-patch.sh $PATCH_DIR/patch
if [[ $? != 0 ]] ; then
echo "PATCH APPLICATION FAILED"
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 patch{color}. The patch command could not apply the patch."
return 1
fi
return 0
}
###############################################################################
calculateJavadocWarnings() {
WARNING_FILE="$1"
RET=$(egrep "^[0-9]+ warnings?$" "$WARNING_FILE" | awk '{sum+=$1} END {print sum}')
}
### Check there are no javadoc warnings
checkJavadocWarnings () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched javadoc warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$MVN clean test javadoc:javadoc -DskipTests > $PATCH_DIR/patchJavadocWarnings.txt 2>&1"
$MVN clean test javadoc:javadoc -DskipTests > $PATCH_DIR/patchJavadocWarnings.txt 2>&1
calculateJavadocWarnings "$PATCH_DIR/masterJavadocWarnings.txt"
nummasterJavadocWarnings=$RET
calculateJavadocWarnings "$PATCH_DIR/patchJavadocWarnings.txt"
numPatchJavadocWarnings=$RET
grep -i warning "$PATCH_DIR/masterJavadocWarnings.txt" > "$PATCH_DIR/masterJavadocWarningsFiltered.txt"
grep -i warning "$PATCH_DIR/patchJavadocWarnings.txt" > "$PATCH_DIR/patchJavadocWarningsFiltered.txt"
diff -u "$PATCH_DIR/masterJavadocWarningsFiltered.txt" \
"$PATCH_DIR/patchJavadocWarningsFiltered.txt" > \
"$PATCH_DIR/diffJavadocWarnings.txt"
rm -f "$PATCH_DIR/masterJavadocWarningsFiltered.txt" "$PATCH_DIR/patchJavadocWarningsFiltered.txt"
echo "There appear to be $nummasterJavadocWarnings javadoc warnings before the patch and $numPatchJavadocWarnings javadoc warnings after applying the patch."
if [[ $nummasterJavadocWarnings != "" && $numPatchJavadocWarnings != "" ]] ; then
if [[ $numPatchJavadocWarnings -gt $nummasterJavadocWarnings ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 javadoc{color}. The javadoc tool appears to have generated `expr $(($numPatchJavadocWarnings-$nummasterJavadocWarnings))` warning messages.
See $BUILD_URL/artifact/patchprocess/diffJavadocWarnings.txt for details."
return 1
fi
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 javadoc{color}. There were no new javadoc warning messages."
return 0
}
###############################################################################
### Check there are no changes in the number of Javac warnings
checkJavacWarnings () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched javac warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$MVN clean test -DskipTests > $PATCH_DIR/patchJavacWarnings.txt 2>&1"
$MVN clean test -DskipTests > $PATCH_DIR/patchJavacWarnings.txt 2>&1
if [[ $? != 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 javac{color:red}. The patch appears to cause the build to fail."
return 2
fi
### Compare master and patch javac warning numbers
if [[ -f $PATCH_DIR/patchJavacWarnings.txt ]] ; then
$GREP '\[WARNING\]' $PATCH_DIR/masterJavacWarnings.txt > $PATCH_DIR/filteredmasterJavacWarnings.txt
$GREP '\[WARNING\]' $PATCH_DIR/patchJavacWarnings.txt > $PATCH_DIR/filteredPatchJavacWarnings.txt
masterJavacWarnings=`cat $PATCH_DIR/filteredmasterJavacWarnings.txt | $AWK 'BEGIN {total = 0} {total += 1} END {print total}'`
patchJavacWarnings=`cat $PATCH_DIR/filteredPatchJavacWarnings.txt | $AWK 'BEGIN {total = 0} {total += 1} END {print total}'`
echo "There appear to be $masterJavacWarnings javac compiler warnings before the patch and $patchJavacWarnings javac compiler warnings after applying the patch."
if [[ $patchJavacWarnings != "" && $masterJavacWarnings != "" ]] ; then
if [[ $patchJavacWarnings -gt $masterJavacWarnings ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 javac{color}. The applied patch generated $patchJavacWarnings javac compiler warnings (more than the master's current $masterJavacWarnings warnings)."
$DIFF $PATCH_DIR/filteredmasterJavacWarnings.txt $PATCH_DIR/filteredPatchJavacWarnings.txt > $PATCH_DIR/diffJavacWarnings.txt
JIRA_COMMENT_FOOTER="Javac warnings: $BUILD_URL/artifact/patchprocess/diffJavacWarnings.txt
$JIRA_COMMENT_FOOTER"
return 1
fi
fi
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 javac{color}. The applied patch does not increase the total number of javac compiler warnings."
return 0
}
###############################################################################
### Check there are no changes in the number of release audit (RAT) warnings
checkReleaseAuditWarnings () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched release audit warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$MVN apache-rat:check > $PATCH_DIR/patchReleaseAuditOutput.txt 2>&1"
$MVN apache-rat:check > $PATCH_DIR/patchReleaseAuditOutput.txt 2>&1
find $BASEDIR -name rat.txt | xargs cat > $PATCH_DIR/patchReleaseAuditWarnings.txt
### Compare master and patch release audit warning numbers
if [[ -f $PATCH_DIR/patchReleaseAuditWarnings.txt ]] ; then
patchReleaseAuditWarnings=`$GREP -c '\!?????' $PATCH_DIR/patchReleaseAuditWarnings.txt`
echo ""
echo ""
echo "There appear to be $patchReleaseAuditWarnings release audit warnings after applying the patch."
if [[ $patchReleaseAuditWarnings != "" ]] ; then
if [[ $patchReleaseAuditWarnings -gt 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 release audit{color}. The applied patch generated $patchReleaseAuditWarnings release audit warnings."
$GREP '\!?????' $PATCH_DIR/patchReleaseAuditWarnings.txt > $PATCH_DIR/patchReleaseAuditProblems.txt
echo "Lines that start with ????? in the release audit report indicate files that do not have an Apache license header." >> $PATCH_DIR/patchReleaseAuditProblems.txt
JIRA_COMMENT_FOOTER="Release audit warnings: $BUILD_URL/artifact/patchprocess/patchReleaseAuditProblems.txt
$JIRA_COMMENT_FOOTER"
return 1
fi
fi
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 release audit{color}. The applied patch does not increase the total number of release audit warnings."
return 0
}
###############################################################################
### Check there are no changes in the number of Checkstyle warnings
checkStyle () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched checkstyle warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$MVN test checkstyle:checkstyle -DskipTests > $PATCH_DIR/patchStyleErrors.txt 2>&1"
$MVN test checkstyle:checkstyle -DskipTests > $PATCH_DIR/patchStyleErrors.txt 2>&1
# JIRA_COMMENT_FOOTER="Checkstyle results: $BUILD_URL/artifact/trunk/build/test/checkstyle-errors.html
# $JIRA_COMMENT_FOOTER"
### calculate actual patchStyleErrors
patchStyleErrors=0
if [[ -f target/munged/checkstyle-result.xml ]] ; then
$GREP -i '<error' target/munged/checkstyle-result.xml > $PATCH_DIR/filteredPatchCheckstyleWarnings.txt
patchStyleErrors=`cat $PATCH_DIR/filteredPatchCheckstyleWarnings.txt | $AWK 'BEGIN {total = 0} {total += 1} END {print total}'`
echo ""
echo ""
echo "There appear to be $patchStyleErrors checkstyle warnings after applying the patch."
fi
if [[ $patchStyleErrors != 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
-1 checkstyle. The patch generated $patchStyleErrors code style errors."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
+1 checkstyle. The patch generated 0 code style errors."
return 0
}
###############################################################################
### Install the new jars so tests and findbugs can find all of the updated jars
buildAndInstall () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Installing all of the jars"
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
echo "$MVN install -Dmaven.javadoc.skip=true -DskipTests -D${PROJECT_NAME}PatchProcess"
$MVN install -Dmaven.javadoc.skip=true -DskipTests
return $?
}
###############################################################################
### Check there are no changes in the number of Findbugs warnings
checkFindbugsWarnings () {
findbugs_version=`${FINDBUGS_HOME}/bin/findbugs -version`
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Determining number of patched Findbugs warnings."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
rc=0
echo " Running findbugs "
echo "$MVN clean test findbugs:findbugs -DskipTests < /dev/null > $PATCH_DIR/patchFindBugsOutput.txt 2>&1"
$MVN clean test findbugs:findbugs -DskipTests < /dev/null > $PATCH_DIR/patchFindBugsOutput.txt 2>&1
rc=$?
if [ $rc != 0 ] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 findbugs{color}. The patch appears to cause Findbugs (version ${findbugs_version}) to fail."
return 1
fi
findbugsWarnings=0
for file in $(find $BASEDIR -name findbugsXml.xml)
do
relative_file=${file#$BASEDIR/} # strip leading $BASEDIR prefix
if [ ! $relative_file == "target/findbugsXml.xml" ]; then
module_suffix=${relative_file%/target/findbugsXml.xml} # strip trailing path
module_suffix=`basename ${module_suffix}`
fi
cp $file $PATCH_DIR/patchFindbugsWarnings${module_suffix}.xml
$FINDBUGS_HOME/bin/setBugDatabaseInfo -timestamp "01/01/2000" \
$PATCH_DIR/patchFindbugsWarnings${module_suffix}.xml \
$PATCH_DIR/patchFindbugsWarnings${module_suffix}.xml
newFindbugsWarnings=`$FINDBUGS_HOME/bin/filterBugs -first "01/01/2000" $PATCH_DIR/patchFindbugsWarnings${module_suffix}.xml \
$PATCH_DIR/newPatchFindbugsWarnings${module_suffix}.xml | $AWK '{print $1}'`
echo "Found $newFindbugsWarnings Findbugs warnings ($file)"
findbugsWarnings=$((findbugsWarnings+newFindbugsWarnings))
$FINDBUGS_HOME/bin/convertXmlToText -html \
$PATCH_DIR/newPatchFindbugsWarnings${module_suffix}.xml \
$PATCH_DIR/newPatchFindbugsWarnings${module_suffix}.html
if [[ $newFindbugsWarnings > 0 ]] ; then
JIRA_COMMENT_FOOTER="Findbugs warnings: $BUILD_URL/artifact/patchprocess/newPatchFindbugsWarnings${module_suffix}.html
$JIRA_COMMENT_FOOTER"
fi
done
if [[ $findbugsWarnings -gt 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:red}-1 findbugs{color}. The patch appears to introduce $findbugsWarnings new Findbugs (version ${findbugs_version}) warnings."
return 1
fi
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 findbugs{color}. The patch does not introduce any new Findbugs (version ${findbugs_version}) warnings."
return 0
}
###############################################################################
### Run the tests
runTests () {
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Running tests."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
failed_tests=""
failed_test_builds=""
test_timeouts=""
test_logfile=$PATCH_DIR/testrun.txt
echo " Running tests "
echo " $MVN clean install -fn -D${PROJECT_NAME}PatchProcess"
$MVN clean install -fae > $test_logfile 2>&1
test_build_result=$?
cat $test_logfile
module_test_timeouts=`$AWK '/^Running / { if (last) { print last } last=$2 } /^Tests run: / { last="" }' $test_logfile`
if [[ -n "$module_test_timeouts" ]] ; then
test_timeouts="$test_timeouts $module_test_timeouts"
fi
module_failed_tests=`find . -name 'TEST*.xml' | xargs $GREP -l -E "<failure|<error" | sed -e "s|.*target/surefire-reports/TEST-| |g" | sed -e "s|\.xml||g"`
if [[ -n "$module_failed_tests" ]] ; then
failed_tests="${failed_tests} ${module_failed_tests}"
fi
if [[ $test_build_result != 0 && -z "$module_failed_tests" && -z "$module_test_timeouts" ]] ; then
failed_test_builds="$module $failed_test_builds"
fi
result=0
comment_prefix=" {color:red}-1 core tests{color}."
if [[ -n "$failed_tests" ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
$comment_prefix The patch failed these unit tests in $modules:
$failed_tests"
comment_prefix=" "
result=1
fi
if [[ -n "$test_timeouts" ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
$comment_prefix The following test timeouts occurred in $modules:
$test_timeouts"
comment_prefix=" "
result=1
fi
if [[ -n "$failed_test_builds" ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
$comment_prefix The test build failed in $failed_test_builds"
result=1
fi
if [[ $result == 0 ]] ; then
JIRA_COMMENT="$JIRA_COMMENT
{color:green}+1 core tests{color}. The patch passed unit tests in $modules."
fi
return $result
}
###############################################################################
# Find the maven module containing the given file.
findModule (){
dir=`dirname $1`
while [ 1 ]
do
if [ -f "$dir/pom.xml" ]
then
echo $dir
return
else
dir=`dirname $dir`
fi
done
}
###############################################################################
### Submit a comment to the defect's Jira
submitJiraComment () {
local result=$1
### Do not output the value of JIRA_COMMENT_FOOTER when run by a developer
if [[ $JENKINS == "false" ]] ; then
JIRA_COMMENT_FOOTER=""
fi
if [[ $result == 0 ]] ; then
comment="{color:green}+1 overall{color}. $JIRA_COMMENT
$JIRA_COMMENT_FOOTER"
else
comment="{color:red}-1 overall{color}. $JIRA_COMMENT
$JIRA_COMMENT_FOOTER"
fi
### Output the test result to the console
echo "
$comment"
if [[ $JENKINS == "true" ]] ; then
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Adding comment to Jira."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
### Update Jira with a comment
export USER=hudson
$JIRACLI -s https://issues.apache.org/jira -a addcomment -u atlasqa -p $JIRA_PASSWD --comment "$comment" --issue $defect
$JIRACLI -s https://issues.apache.org/jira -a logout -u atlasqa -p $JIRA_PASSWD
fi
}
###############################################################################
### Cleanup files
cleanupAndExit () {
local result=$1
if [[ $JENKINS == "true" ]] ; then
if [ -e "$PATCH_DIR" ] ; then
mv $PATCH_DIR $BASEDIR
fi
fi
echo ""
echo ""
echo "======================================================================"
echo "======================================================================"
echo " Finished build."
echo "======================================================================"
echo "======================================================================"
echo ""
echo ""
exit $result
}
###############################################################################
###############################################################################
###############################################################################
JIRA_COMMENT=""
JIRA_COMMENT_FOOTER="Console output: $BUILD_URL/console
This message is automatically generated."
### Check if arguments to the script have been specified properly or not
parseArgs $@
cd $BASEDIR
checkout
RESULT=$?
if [[ $JENKINS == "true" ]] ; then
if [[ $RESULT != 0 ]] ; then
exit 100
fi
fi
downloadPatch
verifyPatch
(( RESULT = RESULT + $? ))
if [[ $RESULT != 0 ]] ; then
submitJiraComment 1
cleanupAndExit 1
fi
prebuildWithoutPatch
(( RESULT = RESULT + $? ))
if [[ $RESULT != 0 ]] ; then
submitJiraComment 1
cleanupAndExit 1
fi
checkAuthor
(( RESULT = RESULT + $? ))
if [[ $JENKINS == "true" ]] ; then
cleanUpXml
fi
checkTests
(( RESULT = RESULT + $? ))
applyPatch
APPLY_PATCH_RET=$?
(( RESULT = RESULT + $APPLY_PATCH_RET ))
if [[ $APPLY_PATCH_RET != 0 ]] ; then
submitJiraComment 1
cleanupAndExit 1
fi
checkJavacWarnings
JAVAC_RET=$?
#2 is returned if the code could not compile
if [[ $JAVAC_RET == 2 ]] ; then
submitJiraComment 1
cleanupAndExit 1
fi
(( RESULT = RESULT + $JAVAC_RET ))
checkJavadocWarnings
(( RESULT = RESULT + $? ))
checkStyle
(( RESULT = RESULT + $? ))
checkFindbugsWarnings
(( RESULT = RESULT + $? ))
checkReleaseAuditWarnings
(( RESULT = RESULT + $? ))
buildAndInstall
### Run tests for Jenkins or if explictly asked for by a developer
if [[ $JENKINS == "true" || $RUN_TESTS == "true" ]] ; then
runTests
(( RESULT = RESULT + $? ))
fi
JIRA_COMMENT_FOOTER="Test results: $BUILD_URL/testReport/
$JIRA_COMMENT_FOOTER"
submitJiraComment $RESULT
cleanupAndExit $RESULT