# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.

cmake_minimum_required(VERSION 3.22)

# This is a Kudu-specific flag that disables Kudu targets that are test-only.
set(NO_TESTS 1)

# Explicitly define project() to allow modifying the compiler before the project is
# initialized.
project(Impala)

option(BUILD_PACKAGES "Build deployment packages")

include(cmake_modules/kudu_cmake_fns.txt)

if (NOT DEFINED BUILD_SHARED_LIBS)
  set(BUILD_SHARED_LIBS OFF)
endif()

# Store BUILD_SHARED_LIBS in a variable so it can be read in config.h.in
set(IMPALA_BUILD_SHARED_LIBS ${BUILD_SHARED_LIBS})

# Build compile commands database
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)

# Codegen-dependent executables need to be linked with -rdynamic; otherwise LLVM
# can't find dependent symbols at runtime.
#
# Rather than setting ENABLE_EXPORTS for each target, this enables it by default,
# as most backend tests depend on codegen. See CMake CMP0065 for more information.
set(CMAKE_ENABLE_EXPORTS ON)

# generate CTest input files
enable_testing()

# where to find cmake modules
set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/cmake_modules")

# Determine the build type. If no build build type is specified, default to debug builds
if (NOT CMAKE_BUILD_TYPE)
  set(CMAKE_BUILD_TYPE DEBUG)
endif(NOT CMAKE_BUILD_TYPE)

STRING (TOUPPER ${CMAKE_BUILD_TYPE} CMAKE_BUILD_TYPE)

message(STATUS "Build type is ${CMAKE_BUILD_TYPE}")

# Write build flags to a file so that they can be read by tests
file(WRITE "${CMAKE_SOURCE_DIR}/.cmake_build_type" ${CMAKE_BUILD_TYPE}\n)
file(APPEND "${CMAKE_SOURCE_DIR}/.cmake_build_type" ${BUILD_SHARED_LIBS}\n)

# Store CMAKE_BUILD_TYPE in a variable so it can be read in config.h.in
string(REPLACE "_" "-" ESCAPED_CMAKE_BUILD_TYPE ${CMAKE_BUILD_TYPE})
set(IMPALA_CMAKE_BUILD_TYPE ${ESCAPED_CMAKE_BUILD_TYPE})

set(ENABLE_CODE_COVERAGE false)
if ("${CMAKE_BUILD_TYPE}" STREQUAL "CODE_COVERAGE_DEBUG")
  set(CMAKE_BUILD_TYPE DEBUG)
  set(ENABLE_CODE_COVERAGE true)
elseif ("${CMAKE_BUILD_TYPE}" STREQUAL "CODE_COVERAGE_RELEASE")
  set(CMAKE_BUILD_TYPE RELEASE)
  set(ENABLE_CODE_COVERAGE true)
endif()

message(STATUS "ENABLE_CODE_COVERAGE: ${ENABLE_CODE_COVERAGE}")

if (ENABLE_CODE_COVERAGE
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "ADDRESS_SANITIZER"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "TSAN"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "UBSAN")
  set (SLOW_BUILD true)
endif()

# Helper function that given a package name constructs the package_ROOT variable based on
# the version number extracted from the environment
function(set_dep_root NAME)
  string(TOLOWER ${NAME} NAME_LOWER)
  string(REPLACE "_" "-" NAME_LOWER ${NAME_LOWER})
  set(VAL_NAME "IMPALA_${NAME}_VERSION")
  set(${NAME}_ROOT $ENV{IMPALA_TOOLCHAIN_PACKAGES_HOME}/${NAME_LOWER}-$ENV{${VAL_NAME}}
      PARENT_SCOPE)
endfunction()

# Helper function that, given a package name and target component, constructs the
# package_target_ROOT variable based on the version number extracted from the
# environment. Mainly used for thrift resolution.
function(set_dep_root_for_target NAME TARGET)
  string(TOLOWER ${NAME} NAME_LOWER)
  string(TOLOWER ${TARGET} TARGET_LOWER)
  string(REPLACE "_" "-" NAME_LOWER ${NAME_LOWER})
  set(VAL_NAME "IMPALA_${NAME}_${TARGET}_VERSION")
  set(${NAME}_${TARGET}_ROOT $ENV{IMPALA_TOOLCHAIN_PACKAGES_HOME}/${NAME_LOWER}-$ENV{${VAL_NAME}}
      PARENT_SCOPE)
endfunction()

# Define root path for all dependencies, this is in the form of
# set_dep_root(PACKAGE) ->
#   PACKAGE_ROOT set to $ENV{IMPALA_TOOLCHAIN_PACKAGES_HOME}/PACKAGE-$ENV{IMPALA_PACKAGE_VERSION}
set_dep_root(AVRO)
set_dep_root(ORC)
set_dep_root(BOOST)
set_dep_root(BREAKPAD)
set_dep_root(BZIP2)
set_dep_root(CRCUTIL)
set_dep_root(FLATBUFFERS)
set_dep_root(GCC)
set_dep_root(GFLAGS)
set_dep_root(GLOG)
set_dep_root(GPERFTOOLS)
set_dep_root(GTEST)
set_dep_root(JWT_CPP)
set_dep_root(LIBEV)
set_dep_root(LIBUNWIND)
set_dep_root(LLVM)
set(LLVM_DEBUG_ROOT
    $ENV{IMPALA_TOOLCHAIN_PACKAGES_HOME}/llvm-$ENV{IMPALA_LLVM_DEBUG_VERSION})
set_dep_root(LZ4)
set_dep_root(ZSTD)
set_dep_root(OPENLDAP)
set_dep_root(PROTOBUF)
set(PROTOBUF_CLANG_ROOT
    $ENV{IMPALA_TOOLCHAIN_PACKAGES_HOME}/protobuf-$ENV{IMPALA_PROTOBUF_CLANG_VERSION})
set_dep_root(RE2)
set_dep_root(RAPIDJSON)
set_dep_root(SNAPPY)
set_dep_root_for_target(THRIFT CPP)
set_dep_root_for_target(THRIFT JAVA)
set_dep_root_for_target(THRIFT PY)
set_dep_root(ZLIB)
set_dep_root(CCTZ)
set_dep_root(CURL)
set_dep_root(CALLONCEHACK)
set_dep_root(CLOUDFLAREZLIB)

# The boost-cmake project hasn't been maintained for years. Let's make sure we
# don't accidentally use it if it can be found.
set(Boost_NO_BOOST_CMAKE ON)

# Make Boost follow the preference of shared libraries vs static libraries.
if(BUILD_SHARED_LIBS)
  set(Boost_USE_STATIC_LIBS OFF)
else()
  set(Boost_USE_STATIC_LIBS ON)
endif()
# Always use the static Boost runtime
set(Boost_USE_STATIC_RUNTIME ON)

# Newer versions of boost (including the version in toolchain) don't build separate
# multithreaded versions (they always are). Make sure to pick those up.
# TODO: understand the consequence of leaving this ON (the default value).
set(Boost_USE_MULTITHREADED OFF)

# The casing and underscoring expected for these properties varies between
# versions of CMake. Multiple inconsistent versions may be present here
# intentionally to provide what a wide range of versions expects.
set(Boost_NO_SYSTEM_PATHS true)
set(BOOST_LIBRARYDIR ${BOOST_ROOT}/lib)
set(BOOST_INCLUDEDIR ${BOOST_ROOT}/include)
set(Boost_INCLUDE_DIR ${BOOST_INCLUDEDIR})

if (CMAKE_DEBUG)
  set(Boost_DEBUG TRUE)
endif()

# Adds a third-party library with name ${NAME}. If BUILD_SHARED_LIBS is true, the new
# library refers to ${SHARED_LIB}; otherwise it refers to ${STATIC_LIB}. If only one
# library (static or shared) is provided, it is used regardless of BUILD_SHARED_LIBS. The
# library's headers are added to the system include path.
function(IMPALA_ADD_THIRDPARTY_LIB NAME HEADER STATIC_LIB SHARED_LIB)
  message(STATUS "----------> Adding thirdparty library ${NAME}. <----------")
  if (HEADER)
    include_directories(SYSTEM ${HEADER})
    message(STATUS "Header files: ${HEADER}")
  endif()
  if (NOT STATIC_LIB AND NOT SHARED_LIB)
    message(FATAL_ERROR "Library '${NAME}' has neither shared nor static library files")
    return ()
  endif()

  if ((BUILD_SHARED_LIBS AND SHARED_LIB) OR NOT STATIC_LIB)
    ADD_THIRDPARTY_LIB(${NAME} SHARED_LIB ${SHARED_LIB})
  else()
    ADD_THIRDPARTY_LIB(${NAME} STATIC_LIB ${STATIC_LIB})
    if (CMAKE_SYSTEM_PROCESSOR STREQUAL "aarch64")
      if ("${CMAKE_BUILD_TYPE}" STREQUAL "UBSAN" OR
          "${CMAKE_BUILD_TYPE}" STREQUAL "UBSAN_FULL")
        # UBSAN builds on ARM require that gcc is included last to cover several symbols
        # omitted in libgcc_s, which is required because we use -rtlib=compiler-rt to
        # work around https://bugs.llvm.org/show_bug.cgi?id=16404.
        target_link_libraries(${NAME} INTERFACE gcc)
      endif()
    endif()
  endif()
endfunction()


find_package(Boost REQUIRED COMPONENTS thread regex filesystem system date_time random locale serialization)
# Mark Boost as a system header to avoid compile warnings.
include_directories(SYSTEM ${Boost_INCLUDE_DIRS})
message(STATUS "Boost include dir: " ${Boost_INCLUDE_DIRS})
message(STATUS "Boost libraries: ${Boost_LIBRARIES}")

# Use OpenSSL from the system, because that is the closest match to the version that this
# build will use when it is deployed.
find_package(OpenSSL 1.0.2 REQUIRED)

# OpenSSL, being a security dependency, is always dynamically linked.
IMPALA_ADD_THIRDPARTY_LIB(openssl_ssl ${OPENSSL_INCLUDE_DIR} "" ${OPENSSL_SSL_LIBRARY})
IMPALA_ADD_THIRDPARTY_LIB(openssl_crypto "" "" ${OPENSSL_CRYPTO_LIBRARY})

find_package(Bzip2 REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(bzip2 ${BZIP2_INCLUDE_DIR} ${BZIP2_STATIC_LIBRARIES} "")

if ($ENV{IMPALA_USE_CLOUDFLARE_ZLIB} STREQUAL "true")
  set(ZLIB_ROOT ${CLOUDFLAREZLIB_ROOT})
endif()
find_package(Zlib REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(zlib ${ZLIB_INCLUDE_DIR} ${ZLIB_STATIC_LIBRARIES}
  ${ZLIB_SHARED_LIBRARIES})

# find HDFS headers and libs
set(HDFS_FIND_QUIETLY TRUE)
find_package(HDFS REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(hdfs ${HDFS_INCLUDE_DIR} ${HDFS_STATIC_LIB} ${HDFS_SHARED_LIB})

# find GLog headers and libs.  Must include glog headers before the other
# google libraries.  They all have a config.h and we want glog's to be picked
# up first.
find_package(GLog REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(glog ${GLOG_INCLUDE_DIR} ${GLOG_STATIC_LIB} ${GLOG_SHARED_LIB})

# find GFlags headers and libs
find_package(GFlags REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(gflags ${GFLAGS_INCLUDE_DIR} ${GFLAGS_STATIC_LIB}
  ${GFLAGS_SHARED_LIB})

# find PProf libs
find_package(PProf REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(pprof ${PPROF_INCLUDE_DIR} ${PPROF_STATIC_LIB} "")

# find GTest headers and libs
set (GTEST_FIND_QUIETLY TRUE)
find_package(GTest REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(gtest ${GTEST_INCLUDE_DIR} ${GTEST_STATIC_LIB} ${GTEST_SHARED_LIB})

# Use LLVM release binaries.
set(LLVM_BINARIES_ROOT ${LLVM_ROOT})
find_package(LlvmBinaries REQUIRED)

# Find LLVM libraries to link against.
if ("${CMAKE_BUILD_TYPE}" STREQUAL "DEBUG"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "DEBUG_NOOPT"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "ADDRESS_SANITIZER"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "TIDY"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "UBSAN"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "UBSAN_FULL"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "TSAN"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "TSAN_FULL")
  # Use the LLVM libaries with assertions for debug builds.
  set(LLVM_ROOT ${LLVM_DEBUG_ROOT})
endif()
message(STATUS "LLVM_ROOT: " ${LLVM_ROOT})

find_package(Llvm REQUIRED)
include_directories(${LLVM_INCLUDE_DIR})

# find Sasl
set(SASL_FIND_QUIETLY TRUE)
find_package(Sasl REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(cyrus_sasl ${SASL_INCLUDE_DIR} "" ${SASL_SHARED_LIB})

# find openldap
find_package(Ldap REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(ldap ${LDAP_INCLUDE_DIR} ${LDAP_STATIC_LIBRARY} "")
IMPALA_ADD_THIRDPARTY_LIB(lber "" ${LBER_STATIC_LIBRARY} "")

# The environment variable $THRIFT_CPP_HOME is set in impala-config.sh
# Make sure it's consistent with $THRIFT_CPP_ROOT.
if (NOT ($ENV{THRIFT_CPP_HOME} STREQUAL ${THRIFT_CPP_ROOT}))
  message(FATAL_ERROR "THRIFT_CPP_ROOT (${THRIFT_CPP_ROOT}) differs from environment "
      "variable THRIFT_CPP_HOME ($ENV{THRIFT_CPP_HOME}).")
endif()
# find thrift headers and libs
set(THRIFT_CPP_FIND_QUIETLY TRUE)
find_package(ThriftCpp REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(thrift ${THRIFT_CPP_INCLUDE_DIR} ${THRIFT_CPP_STATIC_LIB} "")
message(STATUS "Thrift CPP version: ${THRIFT_CPP_VERSION}")
message(STATUS "Thrift CPP contrib dir: ${THRIFT_CPP_CONTRIB_DIR}")
message(STATUS "Thrift CPP compiler: ${THRIFT_CPP_COMPILER}")

# The environment variable $THRIFT_JAVA_HOME is set in impala-config.sh
# Make sure it's consistent with $THRIFT_JAVA_ROOT.
if (NOT ($ENV{THRIFT_JAVA_HOME} STREQUAL ${THRIFT_JAVA_ROOT}))
  message(FATAL_ERROR "THRIFT_JAVA_ROOT (${THRIFT_JAVA_ROOT}) differs from environment "
      "variable THRIFT_JAVA_HOME ($ENV{THRIFT_JAVA_HOME}).")
endif()
find_package(ThriftJava REQUIRED)
message(STATUS "Thrift JAVA version: ${THRIFT_JAVA_VERSION}")
message(STATUS "Thrift JAVA compiler: ${THRIFT_JAVA_COMPILER}")

# The environment variable $THRIFT_PY_HOME is set in impala-config.sh
# Make sure it's consistent with $THRIFT_PY_ROOT.
if (NOT ($ENV{THRIFT_PY_HOME} STREQUAL ${THRIFT_PY_ROOT}))
  message(FATAL_ERROR "THRIFT_PY_ROOT (${THRIFT_PY_ROOT}) differs from environment "
      "variable THRIFT_PY_HOME ($ENV{THRIFT_PY_HOME}).")
endif()
find_package(ThriftPython REQUIRED)
message(STATUS "Thrift PY version: ${THRIFT_PY_VERSION}")
message(STATUS "Thrift PY compiler: ${THRIFT_PY_COMPILER}")

# find flatbuffers headers, lib and compiler
find_package(FlatBuffers REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(flatbuffers ${FLATBUFFERS_INCLUDE_DIR}
  ${FLATBUFFERS_STATIC_LIB} "")
message(STATUS "FlatBuffers compiler: ${FLATBUFFERS_COMPILER}")

# find Snappy headers and libs
find_package(Snappy REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(snappy ${SNAPPY_INCLUDE_DIR} ${SNAPPY_STATIC_LIB} "")

# find lz4 lib
find_package(Lz4 REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(lz4 ${LZ4_INCLUDE_DIR} ${LZ4_STATIC_LIB} "")

# find zstd lib
find_package(Zstd REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(zstd ${ZSTD_INCLUDE_DIR} ${ZSTD_STATIC_LIB} "")

# find re2 headers and libs
find_package(Re2 REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(re2 ${RE2_INCLUDE_DIR} ${RE2_STATIC_LIB} "")

# find jwt-cpp headers
find_package(JwtCpp REQUIRED)
include_directories(${JWT_CPP_INCLUDE_DIR})
message(STATUS "jwt-cpp include dir: " ${JWT_CPP_INCLUDE_DIR})

# find rapidjson headers
find_package(RapidJson REQUIRED)
include_directories(${RAPIDJSON_INCLUDE_DIR})
message(STATUS "RapidJson include dir: " ${RAPIDJSON_INCLUDE_DIR})

# find Avro headers and libs
find_package(Avro REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(avro ${AVRO_INCLUDE_DIR} ${AVRO_STATIC_LIB} "")
message(STATUS "Use C++ AVRO library: " $ENV{USE_AVRO_CPP})

# find ORC headers and libs
find_package(Orc REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(orc ${ORC_INCLUDE_DIR} ${ORC_STATIC_LIB} "")

# find CCTZ headers and libs
find_package(Cctz REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(cctz ${CCTZ_INCLUDE_DIR} ${CCTZ_STATIC_LIB} "")

# find protobuf headers, libs and compiler
if ("${CMAKE_BUILD_TYPE}" STREQUAL "ADDRESS_SANITIZER"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "TIDY"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "UBSAN"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "UBSAN_FULL"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "TSAN"
    OR "${CMAKE_BUILD_TYPE}" STREQUAL "TSAN_FULL")
  # Use the protobuf library with patches for Clang builds.
  set(PROTOBUF_ROOT ${PROTOBUF_CLANG_ROOT})
endif()
message(STATUS "PROTOBUF_ROOT: " ${PROTOBUF_ROOT})

find_package(Protobuf REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(protobuf ${PROTOBUF_INCLUDE_DIR} ${PROTOBUF_STATIC_LIBRARY}
  ${PROTOBUF_SHARED_LIBRARY})
IMPALA_ADD_THIRDPARTY_LIB(protoc ${PROTOBUF_INCLUDE_DIR} ${PROTOBUF_PROTOC_STATIC_LIBRARY}
  ${PROTOBUF_PROTOC_SHARED_LIBRARY})

# find libev headers and libs
find_package(LibEv REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(libev ${LIBEV_INCLUDE_DIR} ${LIBEV_STATIC_LIB}
  ${LIBEV_SHARED_LIB})

# Find crcutil headers and libs
find_package(Crcutil REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(crcutil ${CRCUTIL_INCLUDE_DIR} ${CRCUTIL_STATIC_LIB}
  ${CRCUTIL_SHARED_LIB})

# find jni headers and libs
set(JAVA_AWT_LIBRARY NotNeeded)
set(JAVA_AWT_INCLUDE_PATH NotNeeded)
find_package(JNI REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(java_jvm "${JNI_INCLUDE_DIRS}" "" ${JAVA_JVM_LIBRARY})

# find breakpad headers and libs
find_package(Breakpad REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(breakpad_client ${BREAKPAD_INCLUDE_DIR} ${BREAKPAD_STATIC_LIB}
  "")

# Be careful with Kerberos: we do not statically link against it as it is a security
# dependency.
find_package(Kerberos REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(krb5 ${KERBEROS_INCLUDE_DIR} "" ${KERBEROS_LIBRARY})

# We require certain binaries from the kerberos project for our automated kerberos
# testing.
find_package(KerberosPrograms)

# find curl headers and libs
find_package(Curl REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(curl ${CURL_INCLUDE_DIR} ${CURL_STATIC_LIB} "")

# find calloncehack headers and libs
find_package(CallOnceHack REQUIRED)
IMPALA_ADD_THIRDPARTY_LIB(calloncehack ${CALLONCEHACK_INCLUDE_DIR} ""
  ${CALLONCEHACK_SHARED_LIB})

# Tests that run any security related tests need to link this in to override the
# krb5_realm_override() implementation in krb5.
# See be/src/kudu/security/krb5_realm_override.cc for more information.
set(KRB5_REALM_OVERRIDE -Wl,--undefined=krb5_realm_override_loaded krb5_realm_override)

###################################################################

# System dependencies
if (NOT APPLE)
  find_library(RT_LIB_PATH rt)
  if(NOT RT_LIB_PATH)
    message(FATAL_ERROR "Could not find librt on the system path")
  endif()
  ADD_THIRDPARTY_LIB(rt
    SHARED_LIB "${RT_LIB_PATH}")

  find_library(DL_LIB_PATH dl)
  if(NOT DL_LIB_PATH)
    message(FATAL_ERROR "Could not find libdl on the system path")
  endif()
  ADD_THIRDPARTY_LIB(dl
    SHARED_LIB "${DL_LIB_PATH}")
endif()

###################################################################

## libunwind
if (NOT APPLE)
  find_package(LibUnwind REQUIRED)
  include_directories(SYSTEM ${LIBUNWIND_INCLUDE_DIR})
  IMPALA_ADD_THIRDPARTY_LIB(libunwind ${LIBUNWIND_INCLUDE_DIR} ${LIBUNWIND_STATIC_LIB}
    ${LIBUNWIND_SHARED_LIB})
endif()

# Required for KRPC_GENERATE, which converts protobuf to stubs.
find_package(KRPC REQUIRED)

# KuduClient can use GLOG
add_definitions(-DKUDU_HEADERS_USE_GLOG)

if (CMAKE_SYSTEM_NAME STREQUAL "Linux" AND CMAKE_SYSTEM_PROCESSOR STREQUAL "aarch64")
  add_definitions(-DCACHELINESIZE_AARCH64=${CACHELINESIZE_AARCH64})
endif()

if(NOT $ENV{KUDU_CLIENT_DIR} EQUAL "")
  set(kuduClient_DIR "$ENV{KUDU_CLIENT_DIR}/usr/local/share/kuduClient/cmake")
else()
  if ("${CMAKE_BUILD_TYPE}" STREQUAL "DEBUG" OR "${CMAKE_BUILD_TYPE}" STREQUAL "DEBUG_NOOPT")
    set(kuduClient_DIR "$ENV{IMPALA_KUDU_HOME}/debug/share/kuduClient/cmake")
  else()
    set(kuduClient_DIR "$ENV{IMPALA_KUDU_HOME}/release/share/kuduClient/cmake")
  endif()
endif()
find_package(kuduClient REQUIRED NO_DEFAULT_PATH)
include_directories(SYSTEM ${KUDU_CLIENT_INCLUDE_DIR})

# Run all commands with a wrapper that generates JUnitXML if the command fails.
# Disabled if the DISABLE_CMAKE_JUNITXML environment variable is set
# Note: There are known limitations for junitxml_command_wrapper.sh. The most
# notable is that commands should not do "cd directory && do_something". Use
# WORKING_DIRECTORY for add_custom_command/add_custom_target instead. See
# junitxml_command_wrapper.sh for more details.
if(NOT $ENV{DISABLE_CMAKE_JUNITXML} EQUAL "")
  message(STATUS "DISABLE_CMAKE_JUNITXML is set, disabling JUnitXML Command Wrapper")
else()
  message(STATUS "Using JUnitXML Command Wrapper")
  SET(JUNITXML_WRAPPER "$ENV{IMPALA_HOME}/bin/junitxml_command_wrapper.sh")
  set_property(GLOBAL PROPERTY RULE_LAUNCH_COMPILE ${JUNITXML_WRAPPER})
  set_property(GLOBAL PROPERTY RULE_LAUNCH_LINK ${JUNITXML_WRAPPER})
  set_property(GLOBAL PROPERTY RULE_LAUNCH_CUSTOM ${JUNITXML_WRAPPER})
endif()

cmake_host_system_information(RESULT OS_DISTRIB_ID QUERY DISTRIB_ID)
cmake_host_system_information(RESULT OS_DISTRIB_VERSION_ID QUERY DISTRIB_VERSION_ID)
message(STATUS "DISTRIB_ID: ${OS_DISTRIB_ID}")
message(STATUS "DISTRIB_VERSION_ID: ${OS_DISTRIB_VERSION_ID}")

## installation path
set(CMAKE_INSTALL_PREFIX "/opt")
set(IMPALA_INSTALLDIR "impala" CACHE INTERNAL "")

# compile these subdirs using their own CMakeLists.txt
add_subdirectory(common/function-registry)
add_subdirectory(common/thrift)
add_subdirectory(common/fbs)
add_subdirectory(common/protobuf)
add_subdirectory(be)
add_subdirectory(docker)
add_subdirectory(java)
add_subdirectory(shell)

install(DIRECTORY "www/" DESTINATION ${IMPALA_INSTALLDIR}/www)
install(FILES fe/target/impala-frontend-$ENV{IMPALA_VERSION}.jar
  DESTINATION ${IMPALA_INSTALLDIR}/lib/jars)

set(IMPALA_GCC_HOME $ENV{IMPALA_TOOLCHAIN_PACKAGES_HOME}/gcc-$ENV{IMPALA_GCC_VERSION})
FILE(GLOB gcc_lib ${IMPALA_GCC_HOME}/lib64/libgcc_s.so.1*)
install(FILES ${gcc_lib} DESTINATION ${IMPALA_INSTALLDIR}/lib/native)

FILE(GLOB cpp_lib ${IMPALA_GCC_HOME}/lib64/libstdc++.so.6*)
install(FILES ${cpp_lib} DESTINATION ${IMPALA_INSTALLDIR}/lib/native)

set(KUDU_HOME $ENV{IMPALA_TOOLCHAIN_PACKAGES_HOME}/kudu-$ENV{IMPALA_KUDU_VERSION}/release)
# The parent folder is lib64 on centos/redhat, while on ubuntu it's lib.
FILE(GLOB kudu_lib ${KUDU_HOME}/lib*/libkudu_client.so*)
install(FILES ${kudu_lib} DESTINATION ${IMPALA_INSTALLDIR}/lib/native)

FILE(GLOB hadoop_lib $ENV{HADOOP_LIB_DIR}/native/libhadoop.so*)
install(FILES ${hadoop_lib} DESTINATION ${IMPALA_INSTALLDIR}/lib/native)

install(DIRECTORY fe/target/dependency/ DESTINATION ${IMPALA_INSTALLDIR}/lib/jars
  FILES_MATCHING PATTERN "*.jar")

string(TOLOWER ${OS_DISTRIB_ID} OS_DISTRIB_ID)
if (${OS_DISTRIB_ID} STREQUAL "rhel" AND ${OS_DISTRIB_VERSION_ID} VERSION_GREATER_EQUAL 8)
  # TODO: remove this after resolving IMPALA-12255
  message(STATUS "Not packaging impala-shell on redhat8+ due to ambiguous python shebang")
else()
  install(DIRECTORY shell/build/impala-shell-$ENV{IMPALA_VERSION}/
    DESTINATION ${IMPALA_INSTALLDIR}/shell
    USE_SOURCE_PERMISSIONS PATTERN "*.pyc" EXCLUDE)
endif()

install(DIRECTORY package/bin/ DESTINATION ${IMPALA_INSTALLDIR}/bin
  USE_SOURCE_PERMISSIONS FILES_MATCHING PATTERN "*.sh")
install(DIRECTORY package/conf/ DESTINATION ${IMPALA_INSTALLDIR}/conf)

# Build target for all generated files which most backend code depends on
add_custom_target(gen-deps ALL DEPENDS thrift-deps proto-deps fb-deps
  kudu-util-proto-deps kudu-rpc-proto-deps kudu-security-proto-deps gen_ir_descriptions)

add_custom_target(tarballs ALL DEPENDS shell_tarball)

add_custom_target(cscope ALL DEPENDS gen-deps
  COMMAND "${CMAKE_SOURCE_DIR}/bin/gen-cscope.sh"
)

add_custom_target(impala_python ALL
  COMMAND "${CMAKE_SOURCE_DIR}/bin/init-impala-python.sh"
)

add_custom_target(impala_python3 ALL
  COMMAND "${CMAKE_SOURCE_DIR}/bin/init-impala-python.sh" "-python3"
)

set(IMPALA_PYTHON_INSTALLS "")
if (NOT $ENV{IMPALA_SYSTEM_PYTHON2} EQUAL "")
  list(APPEND IMPALA_PYTHON_INSTALLS shell_python2_install)
endif()
if (NOT $ENV{IMPALA_SYSTEM_PYTHON3} EQUAL "")
  list(APPEND IMPALA_PYTHON_INSTALLS shell_python3_install)
endif()
add_custom_target(impala_shell_pypi ALL DEPENDS ${IMPALA_PYTHON_INSTALLS})

add_custom_target(notests_independent_targets DEPENDS
  java cscope tarballs impala_python impala_python3 impala_shell_pypi
)
add_custom_target(notests_regular_targets DEPENDS
  impalad statestored catalogd admissiond fesupport loggingsupport ImpalaUdf udasample udfsample impala-profile-tool
)

add_custom_target(notests_all_targets DEPENDS
  notests_independent_targets notests_regular_targets
)

# Dump include paths to a file
if (DUMP_INCLUDE_PATHS)
  file(REMOVE "${DUMP_INCLUDE_PATHS}")
  get_property(dirs DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} PROPERTY INCLUDE_DIRECTORIES)
  foreach(dir ${dirs})
    file(APPEND "${DUMP_INCLUDE_PATHS}" "${dir}\n")
  endforeach()
endif(DUMP_INCLUDE_PATHS)

SET(CMAKE_EXE_LINKER_FLAGS  "${CMAKE_EXE_LINKER_FLAGS} -stdlib=libstdc++")

# packaging
if (BUILD_PACKAGES)

  if (${OS_DISTRIB_ID} MATCHES "(rhel|centos)")
    set(CPACK_GENERATOR "RPM")
  elseif (${OS_DISTRIB_ID} MATCHES "ubuntu")
    set(CPACK_GENERATOR "DEB")
  else()
    message(WARNING "OS is ${OS_DISTRIB_ID}. No packages will be generated.")
  endif()

  if (CPACK_GENERATOR)
    message(STATUS "Packaging enabled: ${CPACK_GENERATOR}")
    set(CPACK_PACKAGE_NAME ${CMAKE_PROJECT_NAME})
    set(CPACK_PACKAGE_VENDOR "Apache")
    set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "An open source massively parallel processing SQL query engine.")
    set(CPACK_PACKAGE_CONTACT "dev@impala.apache.org")
    set(CPACK_PACKAGE_HOMEPAGE_URL "https://impala.apache.org")
    set(CPACK_PACKAGE_VERSION "$ENV{IMPALA_VERSION}")
    set(CPACK_RPM_PACKAGE_LICENSE "ASL-2.0")
    # Set a meaningful package name, e.g. Impala-4.3.0-SNAPSHOT_hive-3.1.3000.7.2.18.0-41-x86_64.el7
    set(CPACK_PACKAGE_FILE_NAME "${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}")
    set(CPACK_PACKAGE_FILE_NAME "${CPACK_PACKAGE_FILE_NAME}_hive-$ENV{IMPALA_HIVE_VERSION}")
    set(CPACK_PACKAGE_FILE_NAME "${CPACK_PACKAGE_FILE_NAME}-${CMAKE_SYSTEM_PROCESSOR}")
    if (${CPACK_GENERATOR} MATCHES "RPM")
      set(CPACK_PACKAGE_FILE_NAME "${CPACK_PACKAGE_FILE_NAME}.el${OS_DISTRIB_VERSION_ID}")
    elseif (${CPACK_GENERATOR} MATCHES "DEB")
      set(CPACK_PACKAGE_FILE_NAME "${CPACK_PACKAGE_FILE_NAME}.ubuntu-${OS_DISTRIB_VERSION_ID}")
    endif()
    message(STATUS "Package name: ${CPACK_PACKAGE_FILE_NAME}")

    if ($ENV{STRIP_DEPLOYMENT_IMPALAD})
      set(CPACK_STRIP_FILES ${IMPALA_INSTALLDIR}/bin/impalad)
      message("Binaries in the package will be stripped")
    endif()

    set(CPACK_PACKAGING_INSTALL_PREFIX "/opt")
    set(CPACK_PACKAGE_INSTALL_DIRECTORY "impala")

    execute_process(
      COMMAND bash -c "${CMAKE_SOURCE_DIR}/docker/install_os_packages.sh --dry-run | tail -n1"
      OUTPUT_VARIABLE PKG_LIST
      OUTPUT_STRIP_TRAILING_WHITESPACE
    )
    if ("${PKG_LIST}" STREQUAL "")
      message(FATAL_ERROR "Package list is empty: '${PKG_LIST}'")
    else()
      message(STATUS "Get required package list: '${PKG_LIST}'")
    endif()

    if (${CPACK_GENERATOR} MATCHES "RPM")
      set(CPACK_RPM_PACKAGE_AUTOREQPROV " no")
      set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE)
      set(CPACK_RPM_PACKAGE_REQUIRES ${PKG_LIST})
    else()
      set(CPACK_DEBIAN_PACKAGE_DEPENDS ${PKG_LIST})
    endif()
  endif()

include(CPack)

endif()