Overview

The ignitetest framework provides basic functionality and services to write integration tests for Apache Ignite. This framework bases on the ducktape test framework, for information about it check the links:

• https://github.com/confluentinc/ducktape - source code of the ducktape.
• http://ducktape-docs.readthedocs.io - documentation to the ducktape.

Structure of the tests directory is:

• ./ignitetest/services contains basic services functionality.
• ./ignitetest/utils contains utils for testing.
• ./ignitetest/tests contains tests.
• ./checks contains unit tests of utils, tests' decorators etc.

Local run

Docker is used to emulate distributed environment. Single container represents a running node.

Requirements

To just start tests locally the only requirement is preinstalled docker. For development process requirements are python >= 3.7.

Run tests

• Change a current directory to${IGNITE_HOME}
• Build Apache IGNITE invoking ${IGNITE_HOME}/scripts/build-module.sh ducktests
• Change a current directory to ${IGNITE_HOME}/modules/ducktests/tests
• Run tests in docker containers using a following command:

./docker/run_tests.sh

• For detailed help and instructions, use a following command:

./docker/run_tests.sh --help

• Test reports, including service logs, are located in the ${IGNITE_HOME}/results directory.

Runned tests management

• Tear down all the currently active ducker-ignite nodes using a following command:

./docker/clean_up.sh

Real environment run

Ducktape allow runs on Custom cluster, Vagrant, K8s, Mesos, Docker, cloud providers, etc.

Requirements

• Set up the cluster. See ./docker/Dockerfile for servers setup hints.

Run tests

• Change a current directory to${IGNITE_HOME}
• Build Apache IGNITE invoking ${IGNITE_HOME}/scripts/build-module.sh ducktests
• Run tests using Ducktape.
  For example:

  ducktape --results-root=./results --cluster-file=./cluster.json --repeat 1 --max-parallel 16 ./modules/ducktests/tests/ignitetest
  

Custom Ignites (forks) testing

Run all tests

Setup

Any version of Apache Ignite, or it's fork, can be tested. Binary releases supported as well as compiled sources.

• Binary releases should be located at /opt directory, eg. /opt/ignite-2.11.0.
• Source releases also should be located at /opt directory, but should be compiled before the first use.
  Use the following command to compile sources properly:

  ./scripts/build-module.sh ducktests
  

You may replace /opt with custom directory by setting install_root globals param.
For example, --globals-json, eg: {"install_root": "/dir42"}

Execution

You may set versions (products) using @ignite_versions decorator at code

@ignite_versions(str(DEV_BRANCH), str(LATEST))

or passing versions set via globals during the execution

--globals-json, eg: {"ignite_versions":["2.8.1", "dev"]}

You may also specify product prefix by project param at globals, for example:

--globals-json, eg: {"project": "fork" ,"ignite_versions": ["ignite-2.8.1", "2.8.1", "dev"]}

will execute tests on ignite-2.8.1, fork-2.8.1, fork-dev

Run tests from the external source/repository

TBD

Special runs

Run with enabled security

Run with SSL enabled

TBD

Run with build-in authentication enabled

TBD

Run with metrics export enabled

To let Ignite nodes export metrics in different formats during test run use the metrics globals parameter as described in following sections.

You would need to install and configure metrics collecting software (like prometheus or zabbix) by yourselves.

Below is the sample prometheus.yml config file which may be used to collect metrics from tests running in docker:

global:
  scrape_interval: 1s
  evaluation_interval: 5s

scrape_configs:
  - job_name: 'ducktests'
    static_configs:
      - targets:
        - 172.20.0.2:8082
        - 172.20.0.3:8082
        - 172.20.0.4:8082
        - 172.20.0.5:8082
        - 172.20.0.6:8082
        - 172.20.0.7:8082
        - 172.20.0.8:8082
        - 172.20.0.9:8082
        - 172.20.0.10:8082
        - 172.20.0.11:8082
        - 172.20.0.12:8082
        - 172.20.0.13:8082
        - 172.20.0.14:8082

In case of docker you might want ask it to assign the same IP addresses to containers each time it is invoked. This way you will be able to create a static config file for your metrics scraper. To do so use the --subnet parameter for the ./docker/run_tests.sh script as

./docker/run_tests.sh --subnet 170.20.0.0/16

Run with the Prometheus metrics exporter

To export metrics in the Prometheus format via the HTTP use the following --globals-json parameters:

{
  "metrics": { 
    "opencensus": { 
      "enabled":true, 
      "port": 8082
    }
  }
}

To separate metrics from different tests the iin label is used. It may be used in software like grafana for filtration.

Label contains the test id string: dot concatenated test package name, test class name, test method name and set of name/value pairs for parameters, like:

discovery_test.DiscoveryTest.test_nodes_fail_not_sequential_zk.nodes_to_kill.2.load_type.ClusterLoad.ATOMIC.ignite_version.ignite-2.11.0

Implementation note. The ignite-opencensus metrics module uses the iin label to expose the IgniteInstanceName cluster configuration parameter. So the ducktests engine exploits this fact and puts the test id to configuration of each ignite node started in scope of particular test.

Run with the JMX metrics exporter

To have Ignite nodes export metrics via the JMX use below global parameters. Note that you also might want to enable the JMХ remote access (running on 1098 port by default) to let external tools like zabbix collect metrics.

{
  "jmx_remote": {
    "enabled": true,
    "port": 1098
  },
  "metrics": {
    "jmx": {
      "enabled":true
    }
  }
}

Development

Preparing development environment

• Create a virtual environment and activate it using following commands:

python3 -m venv ~/.virtualenvs/ignite-ducktests-dev
source ~/.virtualenvs/ignite-ducktests-dev/bin/activate

• Change a current directory to ${IGNITE_HOME}/modules/ducktests/tests. We refer to it as ${DUCKTESTS_DIR}.
• Install requirements and ignitetests as editable using following commands:

pip install -r docker/requirements-dev.txt
pip install -e .

• For running unit tests invoke pytest in ${DUCKTESTS_DIR}.
• For checking codestyle invoke flake8 in ${DUCKTESTS_DIR}.

Run checks over multiple python's versions using tox (optional)

All commits and PR‘s are checked against multiple python’s version, namely 3.6, 3.7 and 3.8. If you want to check your PR as it will be checked on Travis CI, you should do following steps:

• Install pyenv, see installation instruction here.
• Install different versions of python (recommended versions are 3.7.9 and 3.8.5)
• Activate them with a command pyenv shell 3.7.9 3.8.5
• Install tox by invoking a command pip install tox
• Change a current directory to ${DUCKTESTS_DIR} and invoke tox