# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License

#########################
# Gatling Configuration #
#########################

# This file contains all the settings configurable for Gatling with their default values

gatling {
  core {
    #outputDirectoryBaseName = "" # The prefix for each simulation result folder (then suffixed by the report generation timestamp)
    #runDescription = ""          # The description for this simulation run, displayed in each report
    #encoding = "utf-8"           # Encoding to use throughout Gatling for file and string manipulation
    #simulationClass = ""         # The FQCN of the simulation to run (when used in conjunction with noReports, the simulation for which assertions will be validated)
    #elFileBodiesCacheMaxCapacity = 200      # Cache size for request body EL templates, set to 0 to disable
    #rawFileBodiesCacheMaxCapacity = 200     # Cache size for request body raw files, set to 0 to disable
    #rawFileBodiesInMemoryMaxSize = 10240    # Max bite size of raw files to be cached in memory
    #pebbleFileBodiesCacheMaxCapacity = 200  # Cache size for request body Pebble templates, set to 0 to disable
    #feederAdaptiveLoadModeThreshold = 100   # File size threshold (in MB). Below load eagerly in memory, above use batch mode with default buffer size
    #shutdownTimeout = 10000                 # Milliseconds to wait for the actor system to shutdown
    extract {
      regex {
        #cacheMaxCapacity = 200 # Cache size for the compiled regexes, set to 0 to disable caching
      }
      xpath {
        #cacheMaxCapacity = 200 # Cache size for the compiled XPath queries,  set to 0 to disable caching
      }
      jsonPath {
        #cacheMaxCapacity = 200 # Cache size for the compiled jsonPath queries, set to 0 to disable caching
      }
      css {
        #cacheMaxCapacity = 200 # Cache size for the compiled CSS selectors queries,  set to 0 to disable caching
      }
    }
    directory {
      #simulations = ""                     # If set, directory where simulation classes are located
      #resources = ""                       # If set, directory where resources, such as feeder files and request bodies, are located
      #reportsOnly = ""                     # If set, name of report folder to look for in order to generate its report
      #binaries = ""                        # If set, name of the folder where compiles classes are located: Defaults to GATLING_HOME/target.
      #results = results                    # Name of the folder where all reports folder are located
    }
  }
  socket {
    #connectTimeout = 10000                 # Timeout in millis for establishing a TCP socket
    #tcpNoDelay = true
    #soKeepAlive = false                    # if TCP keepalive configured at OS level should be used
    #soReuseAddress = false
  }
  netty {
    #useNativeTransport = true              # if Netty Linux native transport should be used instead of Java NIO
    #useIoUring = false                     # if io_uring should be used instead of epoll if available
    #allocator = "pooled"                   # switch to unpooled for unpooled ByteBufAllocator
    #maxThreadLocalCharBufferSize = 200000  # Netty's default is 16k
  }
  ssl {
    #useOpenSsl = true                    # if OpenSSL should be used instead of JSSE (only the latter can be debugged with -Djavax.net.debug=ssl)
    #useOpenSslFinalizers = false         # if OpenSSL contexts should be freed with Finalizer or if using RefCounted is fine
    #handshakeTimeout = 10000             # TLS handshake timeout in millis
    #useInsecureTrustManager = true       # Use an insecure TrustManager that trusts all server certificates
    #enabledProtocols = []             # Array of enabled protocols for HTTPS, if empty use Netty's defaults
    #enabledCipherSuites = []          # Array of enabled cipher suites for HTTPS, if empty enable all available ciphers
    #sessionCacheSize = 0              # SSLSession cache size, set to 0 to use JDK's default
    #sessionTimeout = 0                # SSLSession timeout in seconds, set to 0 to use JDK's default (24h)
    #enableSni = true                     # When set to true, enable Server Name indication (SNI)
    keyStore {
      #type = ""      # Type of SSLContext's KeyManagers store, possible values are jks and p12
      #file = ""      # Location of SSLContext's KeyManagers store
      #password = ""  # Password for SSLContext's KeyManagers store
      #algorithm = "" # Algorithm used SSLContext's KeyManagers store, typically RSA
    }
    trustStore {
      #type = ""      # Type of SSLContext's TrustManagers store, possible values are jks and p12
      #file = ""      # Location of SSLContext's TrustManagers store
      #password = ""  # Password for SSLContext's TrustManagers store
      #algorithm = "" # Algorithm used by SSLContext's TrustManagers store, typically RSA
    }
  }
  charting {
    #noReports = false       # When set to true, don't generate HTML reports
    #maxPlotPerSeries = 1000 # Number of points per graph in Gatling reports
    #useGroupDurationMetric = false  # Switch group timings from cumulated response time to group duration.
    indicators {
      lowerBound = 2      # Lower bound for the requests' response time to track in the reports and the console summary
      higherBound = 4     # Higher bound for the requests' response time to track in the reports and the console summary
      #percentile1 = 50      # Value for the 1st percentile to track in the reports, the console summary and Graphite
      #percentile2 = 75      # Value for the 2nd percentile to track in the reports, the console summary and Graphite
      #percentile3 = 95      # Value for the 3rd percentile to track in the reports, the console summary and Graphite
      #percentile4 = 99      # Value for the 4th percentile to track in the reports, the console summary and Graphite
    }
  }
  http {
    #fetchedCssCacheMaxCapacity = 200          # Cache size for CSS parsed content, set to 0 to disable
    #fetchedHtmlCacheMaxCapacity = 200         # Cache size for HTML parsed content, set to 0 to disable
    #perUserCacheMaxCapacity = 200             # Per virtual user cache size, set to 0 to disable
    #warmUpUrl = "https://gatling.io"          # The URL to use to warm-up the HTTP stack (blank means disabled)
    #pooledConnectionIdleTimeout = 60000       # Timeout in millis for a connection to stay idle in the pool
    #requestTimeout = 60000                    # Timeout in millis for performing an HTTP request
    #enableHostnameVerification = false        # When set to true, enable hostname verification: SSLEngine.setHttpsEndpointIdentificationAlgorithm("HTTPS")
    dns {
      #queryTimeout = 5000                     # Timeout in millis of each DNS query in millis
      #maxQueriesPerResolve = 6                # Maximum allowed number of DNS queries for a given name resolution
    }
  }
  jms {
    #replyTimeoutScanPeriod = 1000  # scan period for timed out reply messages
  }
  data {
    #writers = [console, file]      # The list of DataWriters to which Gatling write simulation data (currently supported : console, file, graphite)
    #utcDateTime = true             # Print date-times with the UTC zone instead of the System's default
    console {
      #light = false                # When set to true, displays a light version without detailed request stats
      #writePeriod = 5              # Write interval, in seconds
    }
    file {
      #bufferSize = 8192            # FileDataWriter's internal data buffer size, in bytes
    }
    leak {
      #noActivityTimeout = 30  # Period, in seconds, for which Gatling may have no activity before considering a leak may be happening
    }
    graphite {
      #light = false              # only send the all* stats
      #host = "localhost"         # The host where the Carbon server is located
      #port = 2003                # The port to which the Carbon server listens to (2003 is default for plaintext, 2004 is default for pickle)
      #protocol = "tcp"           # The protocol used to send data to Carbon (currently supported : "tcp", "udp")
      #rootPathPrefix = "gatling" # The common prefix of all metrics sent to Graphite
      #bufferSize = 8192          # Internal data buffer size, in bytes
      #writePeriod = 1            # Write period, in seconds
    }
    enableAnalytics = false              # Anonymous Usage Analytics (no tracking), please support
  }
}