| # |
| # Based upon the NCSA server configuration files originally by Rob McCool. |
| # |
| # This is the main Apache server configuration file. It contains the |
| # configuration directives that give the server its instructions. |
| # See <URL:http://www.apache.org/docs/> for detailed information about |
| # the directives. |
| # |
| # Do NOT simply read the instructions in here without understanding |
| # what they do. They're here only as hints or reminders. If you are unsure |
| # consult the online docs. You have been warned. |
| # |
| # The configuration directives are grouped into three basic sections: |
| # 1. Directives that control the operation of the Apache server process as a |
| # whole (the 'global environment'). |
| # 2. Directives that define the parameters of the 'main' or 'default' server, |
| # which responds to requests that aren't handled by a virtual host. |
| # These directives also provide default values for the settings |
| # of all virtual hosts. |
| # 3. Settings for virtual hosts, which allow Web requests to be sent to |
| # different IP addresses or hostnames and have them handled by the |
| # same Apache server process. |
| # |
| # Configuration and logfile names: If the filenames you specify for many |
| # of the server's control files begin with "/" (or "drive:/" for Win32), the |
| # server will use that explicit path. If the filenames do *not* begin |
| # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" |
| # with ServerRoot set to "/usr/local/apache" will be interpreted by the |
| # server as "/usr/local/apache/logs/foo.log". |
| # |
| |
| ### Section 1: Global Environment |
| # |
| # The directives in this section affect the overall operation of Apache, |
| # such as the number of concurrent requests it can handle or where it |
| # can find its configuration files. |
| # |
| |
| # |
| # ServerRoot: The top of the directory tree under which the server's |
| # configuration, error, and log files are kept. |
| # |
| # NOTE! If you intend to place this on an NFS (or otherwise network) |
| # mounted filesystem then please read the LockFile documentation |
| # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>); |
| # you will save yourself a lot of trouble. |
| # |
| # Do NOT add a slash at the end of the directory path. |
| # |
| ServerRoot "@@ServerRoot@@" |
| |
| # |
| # The LockFile directive sets the path to the lockfile used when Apache |
| # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or |
| # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at |
| # its default value. The main reason for changing it is if the logs |
| # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL |
| # DISK. The PID of the main server process is automatically appended to |
| # the filename. |
| # |
| #LockFile logs/accept.lock |
| |
| # |
| # PidFile: The file in which the server should record its process |
| # identification number when it starts. |
| # |
| PidFile logs/httpd.pid |
| |
| # |
| # ScoreBoardFile: File used to store internal server process information. |
| # Not all architectures require this. But if yours does (you'll know because |
| # this file will be created when you run Apache) then you *must* ensure that |
| # no two invocations of Apache share the same scoreboard file. |
| # |
| <IfModule !perchild.c> |
| ScoreBoardFile logs/apache_runtime_status |
| </IfModule> |
| |
| # |
| # Timeout: The number of seconds before receives and sends time out. |
| # |
| Timeout 300 |
| |
| # |
| # KeepAlive: Whether or not to allow persistent connections (more than |
| # one request per connection). Set to "Off" to deactivate. |
| # |
| KeepAlive On |
| |
| # |
| # MaxKeepAliveRequests: The maximum number of requests to allow |
| # during a persistent connection. Set to 0 to allow an unlimited amount. |
| # We recommend you leave this number high, for maximum performance. |
| # |
| MaxKeepAliveRequests 100 |
| |
| # |
| # KeepAliveTimeout: Number of seconds to wait for the next request from the |
| # same client on the same connection. |
| # |
| KeepAliveTimeout 15 |
| |
| ## |
| ## Server-Pool Size Regulation (MPM specific) |
| ## |
| |
| # prefork MPM |
| # StartServers ......... number of server processes to start |
| # MinSpareServers ...... minimum number of server processes which are kept spare |
| # MaxSpareServers ...... maximum number of server processes which are kept spare |
| # MaxClients ........... maximum number of server processes allowed to start |
| # MaxRequestsPerChild .. maximum number of requests a server process serves |
| <IfModule prefork.c> |
| StartServers 5 |
| MinSpareServers 5 |
| MaxSpareServers 10 |
| MaxClients 20 |
| MaxRequestsPerChild 0 |
| </IfModule> |
| |
| # pthread MPM |
| # StartServers ......... initial number of server processes to start |
| # MaxClients ........... maximum number of server processes allowed to start |
| # MinSpareThreads ...... minimum number of worker threads which are kept spare |
| # MaxSpareThreads ...... maximum number of worker threads which are kept spare |
| # ThreadsPerChild ...... constant number of worker threads in each server process |
| # MaxRequestsPerChild .. maximum number of requests a server process serves |
| <IfModule threaded.c> |
| StartServers 3 |
| MaxClients 8 |
| MinSpareThreads 5 |
| MaxSpareThreads 10 |
| ThreadsPerChild 25 |
| MaxRequestsPerChild 0 |
| </IfModule> |
| |
| # perchild MPM |
| # NumServers ........... constant number of server processes |
| # StartThreads ......... initial number of worker threads in each server process |
| # MinSpareThreads ...... minimum number of worker threads which are kept spare |
| # MaxSpareThreads ...... maximum number of worker threads which are kept spare |
| # MaxThreadsPerChild ... maximum number of worker threads in each server process |
| # MaxRequestsPerChild .. maximum number of connections per server process (then it dies) |
| <IfModule perchild.c> |
| NumServers 5 |
| StartThreads 5 |
| MinSpareThreads 5 |
| MaxSpareThreads 10 |
| MaxThreadsPerChild 20 |
| MaxRequestsPerChild 0 |
| </IfModule> |
| |
| # |
| # Listen: Allows you to bind Apache to specific IP addresses and/or |
| # ports, in addition to the default. See also the <VirtualHost> |
| # directive. |
| # |
| #Listen 3000 |
| #Listen 12.34.56.78:80 |
| |
| # |
| # Dynamic Shared Object (DSO) Support |
| # |
| # To be able to use the functionality of a module which was built as a DSO you |
| # have to place corresponding `LoadModule' lines at this location so the |
| # directives contained in it are actually available _before_ they are used. |
| # Please read the file README.DSO in the Apache 1.3 distribution for more |
| # details about the DSO mechanism and run `httpd -l' for the list of already |
| # built-in (statically linked and thus always available) modules in your httpd |
| # binary. |
| # |
| # Note: The order is which modules are loaded is important. Don't change |
| # the order below without expert advice. |
| # |
| # Example: |
| # LoadModule foo_module modules/mod_foo.so |
| |
| ### Section 2: 'Main' server configuration |
| # |
| # The directives in this section set up the values used by the 'main' |
| # server, which responds to any requests that aren't handled by a |
| # <VirtualHost> definition. These values also provide defaults for |
| # any <VirtualHost> containers you may define later in the file. |
| # |
| # All of these directives may appear inside <VirtualHost> containers, |
| # in which case these default settings will be overridden for the |
| # virtual host being defined. |
| # |
| |
| # |
| # If your ServerType directive (set earlier in the 'Global Environment' |
| # section) is set to "inetd", the next few directives don't have any |
| # effect since their settings are defined by the inetd configuration. |
| # Skip ahead to the ServerAdmin directive. |
| # |
| |
| # |
| # Port: The port to which the standalone server listens. For |
| # ports < 1023, you will need httpd to be run as root initially. |
| # |
| Port @@Port@@ |
| |
| # |
| # If you wish httpd to run as a different user or group, you must run |
| # httpd as root initially and it will switch. |
| # |
| # User/Group: The name (or #number) of the user/group to run httpd as. |
| # . On SCO (ODT 3) use "User nouser" and "Group nogroup". |
| # . On HPUX you may not be able to use shared memory as nobody, and the |
| # suggested workaround is to create a user www and use that user. |
| # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) |
| # when the value of (unsigned)Group is above 60000; |
| # don't use Group #-1 on these systems! |
| # |
| User nobody |
| Group #-1 |
| |
| # |
| # ServerAdmin: Your address, where problems with the server should be |
| # e-mailed. This address appears on some server-generated pages, such |
| # as error documents. |
| # |
| ServerAdmin you@your.address |
| |
| # |
| # ServerName allows you to set a host name which is sent back to clients for |
| # your server if it's different than the one the program would get (i.e., use |
| # "www" instead of the host's real name). |
| # |
| # Note: You cannot just invent host names and hope they work. The name you |
| # define here must be a valid DNS name for your host. If you don't understand |
| # this, ask your network administrator. |
| # If your host doesn't have a registered DNS name, enter its IP address here. |
| # You will have to access it by its address (e.g., http://123.45.67.89/) |
| # anyway, and this will make redirections work in a sensible way. |
| # |
| #ServerName new.host.name |
| |
| # |
| # DocumentRoot: The directory out of which you will serve your |
| # documents. By default, all requests are taken from this directory, but |
| # symbolic links and aliases may be used to point to other locations. |
| # |
| DocumentRoot "@@ServerRoot@@/htdocs" |
| |
| # |
| # Each directory to which Apache has access, can be configured with respect |
| # to which services and features are allowed and/or disabled in that |
| # directory (and its subdirectories). |
| # |
| # First, we configure the "default" to be a very restrictive set of |
| # permissions. |
| # |
| <Directory /> |
| Options FollowSymLinks |
| AllowOverride None |
| </Directory> |
| |
| # |
| # Note that from this point forward you must specifically allow |
| # particular features to be enabled - so if something's not working as |
| # you might expect, make sure that you have specifically enabled it |
| # below. |
| # |
| |
| # |
| # This should be changed to whatever you set DocumentRoot to. |
| # |
| <Directory "@@ServerRoot@@/htdocs"> |
| |
| # |
| # This may also be "None", "All", or any combination of "Indexes", |
| # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". |
| # |
| # Note that "MultiViews" must be named *explicitly* --- "Options All" |
| # doesn't give it to you. |
| # |
| Options Indexes FollowSymLinks MultiViews |
| |
| # |
| # This controls which options the .htaccess files in directories can |
| # override. Can also be "All", or any combination of "Options", "FileInfo", |
| # "AuthConfig", and "Limit" |
| # |
| AllowOverride None |
| |
| # |
| # Controls who can get stuff from this server. |
| # |
| Order allow,deny |
| Allow from all |
| </Directory> |
| |
| # |
| # UserDir: The name of the directory which is appended onto a user's home |
| # directory if a ~user request is received. |
| # |
| UserDir public_html |
| |
| # |
| # Control access to UserDir directories. The following is an example |
| # for a site where these directories are restricted to read-only. |
| # |
| #<Directory /home/*/public_html> |
| # AllowOverride FileInfo AuthConfig Limit |
| # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec |
| # <Limit GET POST OPTIONS PROPFIND> |
| # Order allow,deny |
| # Allow from all |
| # </Limit> |
| # <LimitExcept GET POST OPTIONS PROPFIND> |
| # Order deny,allow |
| # Deny from all |
| # </LimitExcept> |
| #</Directory> |
| |
| # |
| # DirectoryIndex: Name of the file or files to use as a pre-written HTML |
| # directory index. Separate multiple entries with spaces. |
| # |
| DirectoryIndex index.html |
| |
| # |
| # AccessFileName: The name of the file to look for in each directory |
| # for access control information. |
| # |
| AccessFileName .htaccess |
| |
| # |
| # The following lines prevent .htaccess files from being viewed by |
| # Web clients. Since .htaccess files often contain authorization |
| # information, access is disallowed for security reasons. Comment |
| # these lines out if you want Web visitors to see the contents of |
| # .htaccess files. If you change the AccessFileName directive above, |
| # be sure to make the corresponding changes here. |
| # |
| # Also, folks tend to use names such as .htpasswd for password |
| # files, so this will protect those as well. |
| # |
| <Files ~ "^\.ht"> |
| Order allow,deny |
| Deny from all |
| </Files> |
| |
| # |
| # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each |
| # document that was negotiated on the basis of content. This asks proxy |
| # servers not to cache the document. Uncommenting the following line disables |
| # this behavior, and proxies will be allowed to cache the documents. |
| # |
| #CacheNegotiatedDocs |
| |
| # |
| # UseCanonicalName: (new for 1.3) With this setting turned on, whenever |
| # Apache needs to construct a self-referencing URL (a URL that refers back |
| # to the server the response is coming from) it will use ServerName and |
| # Port to form a "canonical" name. With this setting off, Apache will |
| # use the hostname:port that the client supplied, when possible. This |
| # also affects SERVER_NAME and SERVER_PORT in CGI scripts. |
| # |
| UseCanonicalName On |
| |
| # |
| # TypesConfig describes where the mime.types file (or equivalent) is |
| # to be found. |
| # |
| TypesConfig conf/mime.types |
| |
| # |
| # DefaultType is the default MIME type the server will use for a document |
| # if it cannot otherwise determine one, such as from filename extensions. |
| # If your server contains mostly text or HTML documents, "text/plain" is |
| # a good value. If most of your content is binary, such as applications |
| # or images, you may want to use "application/octet-stream" instead to |
| # keep browsers from trying to display binary files as though they are |
| # text. |
| # |
| DefaultType text/plain |
| |
| # |
| # The mod_mime_magic module allows the server to use various hints from the |
| # contents of the file itself to determine its type. The MIMEMagicFile |
| # directive tells the module where the hint definitions are located. |
| # mod_mime_magic is not part of the default server (you have to add |
| # it yourself with a LoadModule [see the DSO paragraph in the 'Global |
| # Environment' section], or recompile the server and include mod_mime_magic |
| # as part of the configuration), so it's enclosed in an <IfModule> container. |
| # This means that the MIMEMagicFile directive will only be processed if the |
| # module is part of the server. |
| # |
| <IfModule mod_mime_magic.c> |
| MIMEMagicFile conf/magic |
| </IfModule> |
| |
| # |
| # HostnameLookups: Log the names of clients or just their IP addresses |
| # e.g., www.apache.org (on) or 204.62.129.132 (off). |
| # The default is off because it'd be overall better for the net if people |
| # had to knowingly turn this feature on, since enabling it means that |
| # each client request will result in AT LEAST one lookup request to the |
| # nameserver. |
| # |
| HostnameLookups Off |
| |
| # |
| # ErrorLog: The location of the error log file. |
| # If you do not specify an ErrorLog directive within a <VirtualHost> |
| # container, error messages relating to that virtual host will be |
| # logged here. If you *do* define an error logfile for a <VirtualHost> |
| # container, that host's errors will be logged there and not here. |
| # |
| ErrorLog logs/error_log |
| |
| # |
| # LogLevel: Control the number of messages logged to the error_log. |
| # Possible values include: debug, info, notice, warn, error, crit, |
| # alert, emerg. |
| # |
| LogLevel warn |
| |
| # |
| # The following directives define some format nicknames for use with |
| # a CustomLog directive (see below). |
| # |
| LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined |
| LogFormat "%h %l %u %t \"%r\" %>s %b" common |
| LogFormat "%{Referer}i -> %U" referer |
| LogFormat "%{User-agent}i" agent |
| |
| # |
| # The location and format of the access logfile (Common Logfile Format). |
| # If you do not define any access logfiles within a <VirtualHost> |
| # container, they will be logged here. Contrariwise, if you *do* |
| # define per-<VirtualHost> access logfiles, transactions will be |
| # logged therein and *not* in this file. |
| # |
| CustomLog logs/access_log common |
| |
| # |
| # If you would like to have agent and referer logfiles, uncomment the |
| # following directives. |
| # |
| #CustomLog logs/referer_log referer |
| #CustomLog logs/agent_log agent |
| |
| # |
| # If you prefer a single logfile with access, agent, and referer information |
| # (Combined Logfile Format) you can use the following directive. |
| # |
| #CustomLog logs/access_log combined |
| |
| # |
| # Optionally add a line containing the server version and virtual host |
| # name to server-generated pages (error documents, FTP directory listings, |
| # mod_status and mod_info output etc., but not CGI generated documents). |
| # Set to "EMail" to also include a mailto: link to the ServerAdmin. |
| # Set to one of: On | Off | EMail |
| # |
| ServerSignature On |
| |
| # |
| # Aliases: Add here as many aliases as you need (with no limit). The format is |
| # Alias fakename realname |
| # |
| # Note that if you include a trailing / on fakename then the server will |
| # require it to be present in the URL. So "/icons" isn't aliased in this |
| # example, only "/icons/".. |
| # |
| Alias /icons/ "@@ServerRoot@@/icons/" |
| |
| <Directory "@@ServerRoot@@/icons"> |
| Options Indexes MultiViews |
| AllowOverride None |
| Order allow,deny |
| Allow from all |
| </Directory> |
| |
| # |
| # ScriptAlias: This controls which directories contain server scripts. |
| # ScriptAliases are essentially the same as Aliases, except that |
| # documents in the realname directory are treated as applications and |
| # run by the server when requested rather than as documents sent to the client. |
| # The same rules about trailing "/" apply to ScriptAlias directives as to |
| # Alias. |
| # |
| ScriptAlias /cgi-bin/ "@@ServerRoot@@/cgi-bin/" |
| |
| <IfModule mod_cgid.c> |
| # |
| # Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path> |
| # for setting UNIX socket for communicating with cgid. |
| # |
| #Scriptsock logs/cgisock |
| </IfModule> |
| |
| # |
| # "@@ServerRoot@@/cgi-bin" should be changed to whatever your ScriptAliased |
| # CGI directory exists, if you have that configured. |
| # |
| <Directory "@@ServerRoot@@/cgi-bin"> |
| AllowOverride None |
| Options None |
| Order allow,deny |
| Allow from all |
| </Directory> |
| |
| # |
| # Redirect allows you to tell clients about documents which used to exist in |
| # your server's namespace, but do not anymore. This allows you to tell the |
| # clients where to look for the relocated document. |
| # Format: Redirect old-URI new-URL |
| # |
| |
| # |
| # Directives controlling the display of server-generated directory listings. |
| # |
| |
| # FancyIndexing is whether you want fancy directory indexing or standard. |
| # VersionSort is whether files containing version numbers should be |
| # compared in the natural way, so that `apache-1.3.9.tar' is placed before |
| # `apache-1.3.12.tar'. |
| IndexOptions FancyIndexing VersionSort |
| |
| # |
| # AddIcon* directives tell the server which icon to show for different |
| # files or filename extensions. These are only displayed for |
| # FancyIndexed directories. |
| # |
| AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip |
| |
| AddIconByType (TXT,/icons/text.gif) text/* |
| AddIconByType (IMG,/icons/image2.gif) image/* |
| AddIconByType (SND,/icons/sound2.gif) audio/* |
| AddIconByType (VID,/icons/movie.gif) video/* |
| |
| AddIcon /icons/binary.gif .bin .exe |
| AddIcon /icons/binhex.gif .hqx |
| AddIcon /icons/tar.gif .tar |
| AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv |
| AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip |
| AddIcon /icons/a.gif .ps .ai .eps |
| AddIcon /icons/layout.gif .html .shtml .htm .pdf |
| AddIcon /icons/text.gif .txt |
| AddIcon /icons/c.gif .c |
| AddIcon /icons/p.gif .pl .py |
| AddIcon /icons/f.gif .for |
| AddIcon /icons/dvi.gif .dvi |
| AddIcon /icons/uuencoded.gif .uu |
| AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl |
| AddIcon /icons/tex.gif .tex |
| AddIcon /icons/bomb.gif core |
| |
| AddIcon /icons/back.gif .. |
| AddIcon /icons/hand.right.gif README |
| AddIcon /icons/folder.gif ^^DIRECTORY^^ |
| AddIcon /icons/blank.gif ^^BLANKICON^^ |
| |
| # |
| # DefaultIcon is which icon to show for files which do not have an icon |
| # explicitly set. |
| # |
| DefaultIcon /icons/unknown.gif |
| |
| # |
| # AddDescription allows you to place a short description after a file in |
| # server-generated indexes. These are only displayed for FancyIndexed |
| # directories. |
| # Format: AddDescription "description" filename |
| # |
| #AddDescription "GZIP compressed document" .gz |
| #AddDescription "tar archive" .tar |
| #AddDescription "GZIP compressed tar archive" .tgz |
| |
| # |
| # ReadmeName is the name of the README file the server will look for by |
| # default, and append to directory listings. |
| # |
| # HeaderName is the name of a file which should be prepended to |
| # directory indexes. |
| # |
| # The server will first look for name.html and include it if found. |
| # If name.html doesn't exist, the server will then look for name.txt |
| # and include it as plaintext if found. |
| # |
| ReadmeName README |
| HeaderName HEADER |
| |
| # |
| # IndexIgnore is a set of filenames which directory indexing should ignore |
| # and not include in the listing. Shell-style wildcarding is permitted. |
| # |
| IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t |
| |
| # |
| # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress |
| # information on the fly. Note: Not all browsers support this. |
| # Despite the name similarity, the following Add* directives have nothing |
| # to do with the FancyIndexing customization directives above. |
| # |
| AddEncoding x-compress Z |
| AddEncoding x-gzip gz tgz |
| |
| # |
| # DefaultLanguage and AddLanguage allows you to specify the language of |
| # a document. You can then use content negotiation to give a browser a |
| # file in a language the user can understand. |
| # |
| # Specify a default language. This means that all data |
| # going out without a specific language tag (see below) will |
| # be marked with this one. You probably do NOT want to set |
| # this unless you are sure it is correct for all cases. |
| # |
| # * It is generally better to not mark a page as |
| # * being a certain language than marking it with the wrong |
| # * language! |
| # |
| # DefaultLanguage nl |
| # |
| # Note 1: The suffix does not have to be the same as the language |
| # keyword --- those with documents in Polish (whose net-standard |
| # language code is pl) may wish to use "AddLanguage pl .po" to |
| # avoid the ambiguity with the common suffix for perl scripts. |
| # |
| # Note 2: The example entries below illustrate that in |
| # some cases the two character 'Language' abbreviation is not |
| # identical to the two character 'Country' code for its country, |
| # E.g. 'Danmark/dk' versus 'Danish/da'. |
| # |
| # Note 3: In the case of 'ltz' we violate the RFC by using a three char |
| # specifier. There is 'work in progress' to fix this and get |
| # the reference data for rfc1766 cleaned up. |
| # |
| # Danish (da) - Dutch (nl) - English (en) - Estonian (et) |
| # French (fr) - German (de) - Greek-Modern (el) |
| # Italian (it) - Norwegian (no) - Korean (kr) |
| # Portugese (pt) - Luxembourgeois* (ltz) |
| # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz) |
| # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) |
| # Russian (ru) |
| # |
| AddLanguage da .dk |
| AddLanguage nl .nl |
| AddLanguage en .en |
| AddLanguage et .et |
| AddLanguage fr .fr |
| AddLanguage de .de |
| AddLanguage el .el |
| AddLanguage it .it |
| AddLanguage ja .ja |
| AddLanguage pl .po |
| AddLanguage kr .kr |
| AddLanguage pt .pt |
| AddLanguage no .no |
| AddLanguage pt-br .pt-br |
| AddLanguage ltz .ltz |
| AddLanguage ca .ca |
| AddLanguage es .es |
| AddLanguage sv .se |
| AddLanguage cz .cz |
| AddLanguage ru .ru |
| AddLanguage tw .tw |
| AddLanguage zh-tw .tw |
| |
| # LanguagePriority allows you to give precedence to some languages |
| # in case of a tie during content negotiation. |
| # |
| # Just list the languages in decreasing order of preference. We have |
| # more or less alphabetized them here. You probably want to change this. |
| # |
| LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ltz ca es sv tw |
| |
| |
| # Specify a default charset for all pages sent out. This is |
| # always a good idea and opens the door for future internationalisation |
| # of your web site, should you ever want it. Specifying it as |
| # a default does little harm; as the standard dictates that a page |
| # is in iso-8859-1 (latin1) unless specified otherwise i.e. you |
| # are merely stating the obvious. There are also some security |
| # reasons in browsers, related to javascript and URL parsing |
| # which encourage you to always set a default char set. |
| # |
| AddDefaultCharset ISO-8859-1 |
| |
| # |
| # Commonly used filename extensions to character sets. You probably |
| # want to avoid clashes with the language extensions, unless you |
| # are good at carefully testing your setup after each change. |
| # See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets for |
| # the official list of charset names and their respective RFCs |
| # |
| AddCharset ISO-8859-1 .iso8859-1 .latin1 |
| AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen |
| AddCharset ISO-8859-3 .iso8859-3 .latin3 |
| AddCharset ISO-8859-4 .iso8859-4 .latin4 |
| AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru |
| AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb |
| AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk |
| AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb |
| AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk |
| AddCharset ISO-2022-JP .iso2022-jp .jis |
| AddCharset ISO-2022-KR .iso2022-kr .kis |
| AddCharset ISO-2022-CN .iso2022-cn .cis |
| AddCharset Big5 .Big5 .big5 |
| # For russian, more than one charset is used (depends on client, mostly): |
| AddCharset WINDOWS-1251 .cp-1251 .win-1251 |
| AddCharset CP866 .cp866 |
| AddCharset KOI8-r .koi8-r .koi8-ru |
| AddCharset KOI8-ru .koi8-uk .ua |
| AddCharset ISO-10646-UCS-2 .ucs2 |
| AddCharset ISO-10646-UCS-4 .ucs4 |
| AddCharset UTF-8 .utf8 |
| |
| # The set below does not map to a specific (iso) standard |
| # but works on a fairly wide range of browsers. Note that |
| # capitalization actually matters (it should not, but it |
| # does for some browsers). |
| # |
| # See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets |
| # for a list of sorts. But browsers support few. |
| # |
| AddCharset GB2312 .gb2312 .gb |
| AddCharset utf-7 .utf7 |
| AddCharset utf-8 .utf8 |
| AddCharset big5 .big5 .b5 |
| AddCharset EUC-TW .euc-tw |
| AddCharset EUC-JP .euc-jp |
| AddCharset EUC-KR .euc-kr |
| AddCharset shift_jis .sjis |
| |
| # AddType allows you to tweak mime.types without actually editing it, or to |
| # make certain files to be certain types. |
| # |
| # For example, the PHP3 module (not part of the Apache distribution - see |
| # http://www.php.net) will typically use: |
| # |
| #AddType application/x-httpd-php3 .php3 |
| #AddType application/x-httpd-php3-source .phps |
| |
| AddType application/x-tar .tgz |
| |
| # |
| # AddHandler allows you to map certain file extensions to "handlers", |
| # actions unrelated to filetype. These can be either built into the server |
| # or added with the Action command (see below) |
| # |
| # If you want to use server side includes, or CGI outside |
| # ScriptAliased directories, uncomment the following lines. |
| # |
| # To use CGI scripts: |
| # |
| #AddHandler cgi-script .cgi |
| |
| # |
| # To use server-parsed HTML files |
| # |
| #<FilesMatch "\.shtml(\..+)?$"> |
| # SetOutputFilter INCLUDES |
| #</FilesMatch> |
| |
| # |
| # Uncomment the following line to enable Apache's send-asis HTTP file |
| # feature |
| # |
| #AddHandler send-as-is asis |
| |
| # |
| # If you wish to use server-parsed imagemap files, use |
| # |
| #AddHandler imap-file map |
| |
| # |
| # To enable type maps, you might want to use |
| # |
| #AddHandler type-map var |
| |
| # |
| # Action lets you define media types that will execute a script whenever |
| # a matching file is called. This eliminates the need for repeated URL |
| # pathnames for oft-used CGI file processors. |
| # Format: Action media/type /cgi-script/location |
| # Format: Action handler-name /cgi-script/location |
| # |
| |
| # |
| # MetaDir: specifies the name of the directory in which Apache can find |
| # meta information files. These files contain additional HTTP headers |
| # to include when sending the document |
| # |
| #MetaDir .web |
| |
| # |
| # MetaSuffix: specifies the file name suffix for the file containing the |
| # meta information. |
| # |
| #MetaSuffix .meta |
| |
| # |
| # Customizable error response (Apache style) |
| # these come in three flavors |
| # |
| # 1) plain text |
| #ErrorDocument 500 "The server made a boo boo." |
| # |
| # 2) local redirects |
| #ErrorDocument 404 /missing.html |
| # to redirect to local URL /missing.html |
| #ErrorDocument 404 "/cgi-bin/missing_handlder.pl" |
| # i.e. any string which starts with a '/' and has |
| # no spaces. |
| # N.B.: You can redirect to a script or a document using server-side-includes. |
| # |
| # 3) external redirects |
| #ErrorDocument 402 http://some.other_server.com/subscription_info.html |
| # i.e. any string whichis a valid URL. |
| # N.B.: Many of the environment variables associated with the original |
| # request will *not* be available to such a script. |
| # |
| # 4) borderline case |
| #ErrorDocument 402 "http://some.other_server.com/info.html is the place to look" |
| # treated as case '1' as it has spaces and thus is not a valid URL |
| # |
| # The following directives modify normal HTTP response behavior. |
| # The first directive disables keepalive for Netscape 2.x and browsers that |
| # spoof it. There are known problems with these browser implementations. |
| # The second directive is for Microsoft Internet Explorer 4.0b2 |
| # which has a broken HTTP/1.1 implementation and does not properly |
| # support keepalive when it is used on 301 or 302 (redirect) responses. |
| # |
| BrowserMatch "Mozilla/2" nokeepalive |
| BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 |
| |
| # |
| # The following directive disables HTTP/1.1 responses to browsers which |
| # are in violation of the HTTP/1.0 spec by not being able to grok a |
| # basic 1.1 response. |
| # |
| BrowserMatch "RealPlayer 4\.0" force-response-1.0 |
| BrowserMatch "Java/1\.0" force-response-1.0 |
| BrowserMatch "JDK/1\.0" force-response-1.0 |
| |
| # |
| # Allow server status reports, with the URL of http://servername/server-status |
| # Change the ".your_domain.com" to match your domain to enable. |
| # |
| #<Location /server-status> |
| # SetHandler server-status |
| # Order deny,allow |
| # Deny from all |
| # Allow from .your_domain.com |
| #</Location> |
| |
| # |
| # Allow remote server configuration reports, with the URL of |
| # http://servername/server-info (requires that mod_info.c be loaded). |
| # Change the ".your_domain.com" to match your domain to enable. |
| # |
| #<Location /server-info> |
| # SetHandler server-info |
| # Order deny,allow |
| # Deny from all |
| # Allow from .your_domain.com |
| #</Location> |
| |
| # |
| # There have been reports of people trying to abuse an old bug from pre-1.1 |
| # days. This bug involved a CGI script distributed as a part of Apache. |
| # By uncommenting these lines you can redirect these attacks to a logging |
| # script on phf.apache.org. Or, you can record them yourself, using the script |
| # support/phf_abuse_log.cgi. |
| # |
| #<Location /cgi-bin/phf*> |
| # Deny from all |
| # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi |
| #</Location> |
| |
| # |
| # Proxy Server directives. Uncomment the following lines to |
| # enable the proxy server: |
| # |
| #<IfModule mod_proxy.c> |
| #ProxyRequests On |
| # |
| #<Directory proxy:*> |
| # Order deny,allow |
| # Deny from all |
| # Allow from .your_domain.com |
| #</Directory> |
| |
| # |
| # Enable/disable the handling of HTTP/1.1 "Via:" headers. |
| # ("Full" adds the server version; "Block" removes all outgoing Via: headers) |
| # Set to one of: Off | On | Full | Block |
| # |
| #ProxyVia On |
| |
| # |
| # To enable the cache as well, edit and uncomment the following lines: |
| # (no cacheing without CacheRoot) |
| # |
| #CacheRoot "@@ServerRoot@@/proxy" |
| #CacheSize 5 |
| #CacheGcInterval 4 |
| #CacheMaxExpire 24 |
| #CacheLastModifiedFactor 0.1 |
| #CacheDefaultExpire 1 |
| #NoCache a_domain.com another_domain.edu joes.garage_sale.com |
| |
| #</IfModule> |
| # End of proxy directives. |
| |
| ### Section 3: Virtual Hosts |
| # |
| # VirtualHost: If you want to maintain multiple domains/hostnames on your |
| # machine you can setup VirtualHost containers for them. Most configurations |
| # use only name-based virtual hosts so the server doesn't need to worry about |
| # IP addresses. This is indicated by the asterisks in the directives below. |
| # |
| # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/> |
| # for further details before you try to setup virtual hosts. |
| # |
| # You may use the command line option '-S' to verify your virtual host |
| # configuration. |
| |
| # |
| # Use name-based virtual hosting. |
| # |
| #NameVirtualHost * |
| |
| # |
| # VirtualHost example: |
| # Almost any Apache directive may go into a VirtualHost container. |
| # The first VirtualHost section is used for requests without a known |
| # server name. |
| # |
| #<VirtualHost *> |
| # ServerAdmin webmaster@dummy-host.example.com |
| # DocumentRoot /www/docs/dummy-host.example.com |
| # ServerName dummy-host.example.com |
| # ErrorLog logs/dummy-host.example.com-error_log |
| # CustomLog logs/dummy-host.example.com-access_log common |
| #</VirtualHost> |