| # |
| # Based upon the NCSA server configuration files originally by Rob McCool. |
| # |
| # This is the main Apache server configuration file. It contains the |
| # configuration directives that give the server its instructions. |
| # See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about |
| # the directives. |
| # |
| # Do NOT simply read the instructions in here without understanding |
| # what they do. They're here only as hints or reminders. If you are unsure |
| # consult the online docs. You have been warned. |
| # |
| # The configuration directives are grouped into three basic sections: |
| # 1. Directives that control the operation of the Apache server process as a |
| # whole (the 'global environment'). |
| # 2. Directives that define the parameters of the 'main' or 'default' server, |
| # which responds to requests that aren't handled by a virtual host. |
| # These directives also provide default values for the settings |
| # of all virtual hosts. |
| # 3. Settings for virtual hosts, which allow Web requests to be sent to |
| # different IP addresses or hostnames and have them handled by the |
| # same Apache server process. |
| # |
| # Configuration and logfile names: If the filenames you specify for many |
| # of the server's control files begin with "/" (or "drive:/" for Win32), the |
| # server will use that explicit path. If the filenames do *not* begin |
| # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" |
| # with ServerRoot set to "/usr/local/apache" will be interpreted by the |
| # server as "/usr/local/apache/logs/foo.log". |
| # |
| |
| ### Section 1: Global Environment |
| # |
| # The directives in this section affect the overall operation of Apache, |
| # such as the number of concurrent requests it can handle or where it |
| # can find its configuration files. |
| # |
| |
| # |
| # ServerRoot: The top of the directory tree under which the server's |
| # configuration, error, and log files are kept. |
| # |
| # NOTE! If you intend to place this on an NFS (or otherwise network) |
| # mounted filesystem then please read the LockFile documentation |
| # (available at <URL:http://httpd.apache.org/docs-2.0/mod/core.html#lockfile>); |
| # you will save yourself a lot of trouble. |
| # |
| # Do NOT add a slash at the end of the directory path. |
| # |
| ServerRoot "@@ServerRoot@@" |
| |
| # |
| # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. |
| # |
| <IfModule !mpm_winnt.c> |
| <IfModule !mpm_netware.c> |
| #LockFile logs/accept.lock |
| </IfModule> |
| </IfModule> |
| |
| # |
| # ScoreBoardFile: File used to store internal server process information. |
| # If unspecified (the default), the scoreboard will be stored in an |
| # anonymous shared memory segment, and will be unavailable to third-party |
| # applications. |
| # If specified, ensure that no two invocations of Apache share the same |
| # scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK. |
| # |
| <IfModule !mpm_netware.c> |
| <IfModule !perchild.c> |
| #ScoreBoardFile logs/apache_runtime_status |
| </IfModule> |
| </IfModule> |
| |
| |
| # |
| # PidFile: The file in which the server should record its process |
| # identification number when it starts. |
| # |
| <IfModule !mpm_netware.c> |
| PidFile logs/httpd.pid |
| </IfModule> |
| |
| # |
| # Timeout: The number of seconds before receives and sends time out. |
| # |
| Timeout 300 |
| |
| # |
| # KeepAlive: Whether or not to allow persistent connections (more than |
| # one request per connection). Set to "Off" to deactivate. |
| # |
| KeepAlive On |
| |
| # |
| # MaxKeepAliveRequests: The maximum number of requests to allow |
| # during a persistent connection. Set to 0 to allow an unlimited amount. |
| # We recommend you leave this number high, for maximum performance. |
| # |
| MaxKeepAliveRequests 100 |
| |
| # |
| # KeepAliveTimeout: Number of seconds to wait for the next request from the |
| # same client on the same connection. |
| # |
| KeepAliveTimeout 15 |
| |
| ## |
| ## Server-Pool Size Regulation (MPM specific) |
| ## |
| |
| # prefork MPM |
| # StartServers: number of server processes to start |
| # MinSpareServers: minimum number of server processes which are kept spare |
| # MaxSpareServers: maximum number of server processes which are kept spare |
| # MaxClients: maximum number of server processes allowed to start |
| # MaxRequestsPerChild: maximum number of requests a server process serves |
| <IfModule prefork.c> |
| StartServers 5 |
| MinSpareServers 5 |
| MaxSpareServers 10 |
| MaxClients 150 |
| MaxRequestsPerChild 0 |
| </IfModule> |
| |
| # worker MPM |
| # StartServers: initial number of server processes to start |
| # MaxClients: maximum number of simultaneous client connections |
| # MinSpareThreads: minimum number of worker threads which are kept spare |
| # MaxSpareThreads: maximum number of worker threads which are kept spare |
| # ThreadsPerChild: constant number of worker threads in each server process |
| # MaxRequestsPerChild: maximum number of requests a server process serves |
| <IfModule worker.c> |
| StartServers 2 |
| MaxClients 150 |
| MinSpareThreads 25 |
| MaxSpareThreads 75 |
| ThreadsPerChild 25 |
| MaxRequestsPerChild 0 |
| </IfModule> |
| |
| # perchild MPM |
| # NumServers: constant number of server processes |
| # StartThreads: initial number of worker threads in each server process |
| # MinSpareThreads: minimum number of worker threads which are kept spare |
| # MaxSpareThreads: maximum number of worker threads which are kept spare |
| # MaxThreadsPerChild: maximum number of worker threads in each server process |
| # MaxRequestsPerChild: maximum number of connections per server process |
| <IfModule perchild.c> |
| NumServers 5 |
| StartThreads 5 |
| MinSpareThreads 5 |
| MaxSpareThreads 10 |
| MaxThreadsPerChild 20 |
| MaxRequestsPerChild 0 |
| </IfModule> |
| |
| # WinNT MPM |
| # ThreadsPerChild: constant number of worker threads in the server process |
| # MaxRequestsPerChild: maximum number of requests a server process serves |
| <IfModule mpm_winnt.c> |
| ThreadsPerChild 250 |
| MaxRequestsPerChild 0 |
| </IfModule> |
| |
| # BeOS MPM |
| # StartThreads: how many threads do we initially spawn? |
| # MaxClients: max number of threads we can have (1 thread == 1 client) |
| # MaxRequestsPerThread: maximum number of requests each thread will process |
| <IfModule beos.c> |
| StartThreads 10 |
| MaxClients 50 |
| MaxRequestsPerThread 10000 |
| </IfModule> |
| |
| # NetWare MPM |
| # ThreadStackSize ...... Stack size allocated for each worker thread |
| # StartThreads ......... Number of worker threads launched at server startup |
| # MinSpareThreads ...... Minimum number of idle threads, to handle request spikes |
| # MaxSpareThreads ...... Maximum number of idle threads |
| # MaxThreads ........... Maximum number of worker threads alive at the same time |
| # MaxRequestsPerChild .. Maximum number of requests a thread serves. It is |
| # recommended that the default value of 0 be set for this |
| # directive on NetWare. This will allow the thread to |
| # continue to service requests indefinitely. |
| <IfModule mpm_netware.c> |
| ThreadStackSize 65536 |
| StartThreads 250 |
| MinSpareThreads 25 |
| MaxSpareThreads 250 |
| MaxThreads 1000 |
| MaxRequestsPerChild 0 |
| </IfModule> |
| |
| # |
| # Listen: Allows you to bind Apache to specific IP addresses and/or |
| # ports, in addition to the default. See also the <VirtualHost> |
| # directive. |
| # |
| # Change this to Listen on specific IP addresses as shown below to |
| # prevent Apache from glomming onto all bound IP addresses (0.0.0.0) |
| # |
| #Listen 12.34.56.78:80 |
| Listen @@Port@@ |
| |
| # |
| # Dynamic Shared Object (DSO) Support |
| # |
| # To be able to use the functionality of a module which was built as a DSO you |
| # have to place corresponding `LoadModule' lines at this location so the |
| # directives contained in it are actually available _before_ they are used. |
| # Statically compiled modules (those listed by `httpd -l') do not need |
| # to be loaded here. |
| # |
| # Example: |
| # LoadModule foo_module modules/mod_foo.so |
| # |
| @@LoadModule@@ |
| |
| # |
| # ExtendedStatus controls whether Apache will generate "full" status |
| # information (ExtendedStatus On) or just basic information (ExtendedStatus |
| # Off) when the "server-status" handler is called. The default is Off. |
| # |
| #ExtendedStatus On |
| |
| ### Section 2: 'Main' server configuration |
| # |
| # The directives in this section set up the values used by the 'main' |
| # server, which responds to any requests that aren't handled by a |
| # <VirtualHost> definition. These values also provide defaults for |
| # any <VirtualHost> containers you may define later in the file. |
| # |
| # All of these directives may appear inside <VirtualHost> containers, |
| # in which case these default settings will be overridden for the |
| # virtual host being defined. |
| # |
| |
| <IfModule !mpm_winnt.c> |
| <IfModule !mpm_netware.c> |
| # |
| # If you wish httpd to run as a different user or group, you must run |
| # httpd as root initially and it will switch. |
| # |
| # User/Group: The name (or #number) of the user/group to run httpd as. |
| # . On SCO (ODT 3) use "User nouser" and "Group nogroup". |
| # . On HPUX you may not be able to use shared memory as nobody, and the |
| # suggested workaround is to create a user www and use that user. |
| # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) |
| # when the value of (unsigned)Group is above 60000; |
| # don't use Group #-1 on these systems! |
| # |
| User nobody |
| Group #-1 |
| </IfModule> |
| </IfModule> |
| |
| # |
| # ServerAdmin: Your address, where problems with the server should be |
| # e-mailed. This address appears on some server-generated pages, such |
| # as error documents. e.g. admin@your-domain.com |
| # |
| ServerAdmin you@your.address |
| |
| # |
| # ServerName gives the name and port that the server uses to identify itself. |
| # This can often be determined automatically, but we recommend you specify |
| # it explicitly to prevent problems during startup. |
| # |
| # If this is not set to valid DNS name for your host, server-generated |
| # redirections will not work. See also the UseCanonicalName directive. |
| # |
| # If your host doesn't have a registered DNS name, enter its IP address here. |
| # You will have to access it by its address anyway, and this will make |
| # redirections work in a sensible way. |
| # |
| #ServerName new.host.name:80 |
| |
| # |
| # UseCanonicalName: Determines how Apache constructs self-referencing |
| # URLs and the SERVER_NAME and SERVER_PORT variables. |
| # When set "Off", Apache will use the Hostname and Port supplied |
| # by the client. When set "On", Apache will use the value of the |
| # ServerName directive. |
| # |
| UseCanonicalName Off |
| |
| # |
| # DocumentRoot: The directory out of which you will serve your |
| # documents. By default, all requests are taken from this directory, but |
| # symbolic links and aliases may be used to point to other locations. |
| # |
| DocumentRoot "@@ServerRoot@@/htdocs" |
| |
| # |
| # Each directory to which Apache has access can be configured with respect |
| # to which services and features are allowed and/or disabled in that |
| # directory (and its subdirectories). |
| # |
| # First, we configure the "default" to be a very restrictive set of |
| # features. |
| # |
| <Directory /> |
| Options FollowSymLinks |
| AllowOverride None |
| </Directory> |
| |
| # |
| # Note that from this point forward you must specifically allow |
| # particular features to be enabled - so if something's not working as |
| # you might expect, make sure that you have specifically enabled it |
| # below. |
| # |
| |
| # |
| # This should be changed to whatever you set DocumentRoot to. |
| # |
| <Directory "@@ServerRoot@@/htdocs"> |
| |
| # |
| # Possible values for the Options directive are "None", "All", |
| # or any combination of: |
| # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews |
| # |
| # Note that "MultiViews" must be named *explicitly* --- "Options All" |
| # doesn't give it to you. |
| # |
| # The Options directive is both complicated and important. Please see |
| # http://httpd.apache.org/docs-2.0/mod/core.html#options |
| # for more information. |
| # |
| Options Indexes FollowSymLinks |
| |
| # |
| # AllowOverride controls what directives may be placed in .htaccess files. |
| # It can be "All", "None", or any combination of the keywords: |
| # Options FileInfo AuthConfig Limit |
| # |
| AllowOverride None |
| |
| # |
| # Controls who can get stuff from this server. |
| # |
| Order allow,deny |
| Allow from all |
| |
| </Directory> |
| |
| # |
| # UserDir: The name of the directory that is appended onto a user's home |
| # directory if a ~user request is received. |
| # |
| UserDir public_html |
| |
| # |
| # Control access to UserDir directories. The following is an example |
| # for a site where these directories are restricted to read-only. |
| # |
| #<Directory /home/*/public_html> |
| # AllowOverride FileInfo AuthConfig Limit |
| # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec |
| # <Limit GET POST OPTIONS PROPFIND> |
| # Order allow,deny |
| # Allow from all |
| # </Limit> |
| # <LimitExcept GET POST OPTIONS PROPFIND> |
| # Order deny,allow |
| # Deny from all |
| # </LimitExcept> |
| #</Directory> |
| |
| # |
| # DirectoryIndex: sets the file that Apache will serve if a directory |
| # is requested. |
| # |
| # The index.html.var file (a type-map) is used to deliver content- |
| # negotiated documents. The MultiViews Option can be used for the |
| # same purpose, but it is much slower. |
| # |
| DirectoryIndex index.html index.html.var |
| |
| # |
| # AccessFileName: The name of the file to look for in each directory |
| # for access control information. See also the AllowOverride directive. |
| # |
| AccessFileName .htaccess |
| |
| # |
| # The following lines prevent .htaccess and .htpasswd files from being |
| # viewed by Web clients. |
| # |
| <Files ~ "^\.ht"> |
| Order allow,deny |
| Deny from all |
| </Files> |
| |
| # |
| # TypesConfig describes where the mime.types file (or equivalent) is |
| # to be found. |
| # |
| TypesConfig conf/mime.types |
| |
| # |
| # DefaultType is the default MIME type the server will use for a document |
| # if it cannot otherwise determine one, such as from filename extensions. |
| # If your server contains mostly text or HTML documents, "text/plain" is |
| # a good value. If most of your content is binary, such as applications |
| # or images, you may want to use "application/octet-stream" instead to |
| # keep browsers from trying to display binary files as though they are |
| # text. |
| # |
| DefaultType text/plain |
| |
| # |
| # The mod_mime_magic module allows the server to use various hints from the |
| # contents of the file itself to determine its type. The MIMEMagicFile |
| # directive tells the module where the hint definitions are located. |
| # |
| <IfModule mod_mime_magic.c> |
| MIMEMagicFile conf/magic |
| </IfModule> |
| |
| # |
| # HostnameLookups: Log the names of clients or just their IP addresses |
| # e.g., www.apache.org (on) or 204.62.129.132 (off). |
| # The default is off because it'd be overall better for the net if people |
| # had to knowingly turn this feature on, since enabling it means that |
| # each client request will result in AT LEAST one lookup request to the |
| # nameserver. |
| # |
| HostnameLookups Off |
| |
| # |
| # ErrorLog: The location of the error log file. |
| # If you do not specify an ErrorLog directive within a <VirtualHost> |
| # container, error messages relating to that virtual host will be |
| # logged here. If you *do* define an error logfile for a <VirtualHost> |
| # container, that host's errors will be logged there and not here. |
| # |
| ErrorLog logs/error_log |
| |
| # |
| # LogLevel: Control the number of messages logged to the error_log. |
| # Possible values include: debug, info, notice, warn, error, crit, |
| # alert, emerg. |
| # |
| LogLevel warn |
| |
| # |
| # The following directives define some format nicknames for use with |
| # a CustomLog directive (see below). |
| # |
| LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined |
| LogFormat "%h %l %u %t \"%r\" %>s %b" common |
| LogFormat "%{Referer}i -> %U" referer |
| LogFormat "%{User-agent}i" agent |
| |
| # |
| # The location and format of the access logfile (Common Logfile Format). |
| # If you do not define any access logfiles within a <VirtualHost> |
| # container, they will be logged here. Contrariwise, if you *do* |
| # define per-<VirtualHost> access logfiles, transactions will be |
| # logged therein and *not* in this file. |
| # |
| CustomLog logs/access_log common |
| |
| # |
| # If you would like to have agent and referer logfiles, uncomment the |
| # following directives. |
| # |
| #CustomLog logs/referer_log referer |
| #CustomLog logs/agent_log agent |
| |
| # |
| # If you prefer a single logfile with access, agent, and referer information |
| # (Combined Logfile Format) you can use the following directive. |
| # |
| #CustomLog logs/access_log combined |
| |
| # |
| # Optionally add a line containing the server version and virtual host |
| # name to server-generated pages (error documents, FTP directory listings, |
| # mod_status and mod_info output etc., but not CGI generated documents). |
| # Set to "EMail" to also include a mailto: link to the ServerAdmin. |
| # Set to one of: On | Off | EMail |
| # |
| ServerSignature On |
| |
| # |
| # Aliases: Add here as many aliases as you need (with no limit). The format is |
| # Alias fakename realname |
| # |
| # Note that if you include a trailing / on fakename then the server will |
| # require it to be present in the URL. So "/icons" isn't aliased in this |
| # example, only "/icons/". If the fakename is slash-terminated, then the |
| # realname must also be slash terminated, and if the fakename omits the |
| # trailing slash, the realname must also omit it. |
| # |
| # We include the /icons/ alias for FancyIndexed directory listings. If you |
| # do not use FancyIndexing, you may comment this out. |
| # |
| Alias /icons/ "@@ServerRoot@@/icons/" |
| |
| <Directory "@@ServerRoot@@/icons"> |
| Options Indexes MultiViews |
| AllowOverride None |
| Order allow,deny |
| Allow from all |
| </Directory> |
| |
| # |
| # This should be changed to the ServerRoot/manual/. The alias provides |
| # the manual, even if you choose to move your DocumentRoot. You may comment |
| # this out if you do not care for the documentation. |
| # |
| Alias /manual "@@ServerRoot@@/manual" |
| |
| <Directory "@@ServerRoot@@/manual"> |
| Options Indexes FollowSymLinks MultiViews |
| AllowOverride None |
| Order allow,deny |
| Allow from all |
| </Directory> |
| |
| # |
| # ScriptAlias: This controls which directories contain server scripts. |
| # ScriptAliases are essentially the same as Aliases, except that |
| # documents in the realname directory are treated as applications and |
| # run by the server when requested rather than as documents sent to the client. |
| # The same rules about trailing "/" apply to ScriptAlias directives as to |
| # Alias. |
| # |
| ScriptAlias /cgi-bin/ "@@ServerRoot@@/cgi-bin/" |
| |
| <IfModule mod_cgid.c> |
| # |
| # Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path> |
| # for setting UNIX socket for communicating with cgid. |
| # |
| #Scriptsock logs/cgisock |
| </IfModule> |
| |
| # |
| # "@@ServerRoot@@/cgi-bin" should be changed to whatever your ScriptAliased |
| # CGI directory exists, if you have that configured. |
| # |
| <Directory "@@ServerRoot@@/cgi-bin"> |
| AllowOverride None |
| Options None |
| Order allow,deny |
| Allow from all |
| </Directory> |
| |
| # |
| # Redirect allows you to tell clients about documents which used to exist in |
| # your server's namespace, but do not anymore. This allows you to tell the |
| # clients where to look for the relocated document. |
| # Example: |
| # Redirect permanent /foo http://www.example.com/bar |
| |
| # |
| # Directives controlling the display of server-generated directory listings. |
| # |
| |
| # |
| # FancyIndexing is whether you want fancy directory indexing or standard. |
| # VersionSort is whether files containing version numbers should be |
| # compared in the natural way, so that `apache-1.3.9.tar' is placed before |
| # `apache-1.3.12.tar'. |
| # |
| IndexOptions FancyIndexing VersionSort |
| |
| # |
| # AddIcon* directives tell the server which icon to show for different |
| # files or filename extensions. These are only displayed for |
| # FancyIndexed directories. |
| # |
| AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip |
| |
| AddIconByType (TXT,/icons/text.gif) text/* |
| AddIconByType (IMG,/icons/image2.gif) image/* |
| AddIconByType (SND,/icons/sound2.gif) audio/* |
| AddIconByType (VID,/icons/movie.gif) video/* |
| |
| AddIcon /icons/binary.gif .bin .exe |
| AddIcon /icons/binhex.gif .hqx |
| AddIcon /icons/tar.gif .tar |
| AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv |
| AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip |
| AddIcon /icons/a.gif .ps .ai .eps |
| AddIcon /icons/layout.gif .html .shtml .htm .pdf |
| AddIcon /icons/text.gif .txt |
| AddIcon /icons/c.gif .c |
| AddIcon /icons/p.gif .pl .py |
| AddIcon /icons/f.gif .for |
| AddIcon /icons/dvi.gif .dvi |
| AddIcon /icons/uuencoded.gif .uu |
| AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl |
| AddIcon /icons/tex.gif .tex |
| AddIcon /icons/bomb.gif core |
| |
| AddIcon /icons/back.gif .. |
| AddIcon /icons/hand.right.gif README |
| AddIcon /icons/folder.gif ^^DIRECTORY^^ |
| AddIcon /icons/blank.gif ^^BLANKICON^^ |
| |
| # |
| # DefaultIcon is which icon to show for files which do not have an icon |
| # explicitly set. |
| # |
| DefaultIcon /icons/unknown.gif |
| |
| # |
| # AddDescription allows you to place a short description after a file in |
| # server-generated indexes. These are only displayed for FancyIndexed |
| # directories. |
| # Format: AddDescription "description" filename |
| # |
| #AddDescription "GZIP compressed document" .gz |
| #AddDescription "tar archive" .tar |
| #AddDescription "GZIP compressed tar archive" .tgz |
| |
| # |
| # ReadmeName is the name of the README file the server will look for by |
| # default, and append to directory listings. |
| # |
| # HeaderName is the name of a file which should be prepended to |
| # directory indexes. |
| ReadmeName README.html |
| HeaderName HEADER.html |
| |
| # |
| # IndexIgnore is a set of filenames which directory indexing should ignore |
| # and not include in the listing. Shell-style wildcarding is permitted. |
| # |
| IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t |
| |
| # |
| # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress |
| # information on the fly. Note: Not all browsers support this. |
| # Despite the name similarity, the following Add* directives have nothing |
| # to do with the FancyIndexing customization directives above. |
| # |
| AddEncoding x-compress Z |
| AddEncoding x-gzip gz tgz |
| |
| # |
| # DefaultLanguage and AddLanguage allows you to specify the language of |
| # a document. You can then use content negotiation to give a browser a |
| # file in a language the user can understand. |
| # |
| # Specify a default language. This means that all data |
| # going out without a specific language tag (see below) will |
| # be marked with this one. You probably do NOT want to set |
| # this unless you are sure it is correct for all cases. |
| # |
| # * It is generally better to not mark a page as |
| # * being a certain language than marking it with the wrong |
| # * language! |
| # |
| # DefaultLanguage nl |
| # |
| # Note 1: The suffix does not have to be the same as the language |
| # keyword --- those with documents in Polish (whose net-standard |
| # language code is pl) may wish to use "AddLanguage pl .po" to |
| # avoid the ambiguity with the common suffix for perl scripts. |
| # |
| # Note 2: The example entries below illustrate that in some cases |
| # the two character 'Language' abbreviation is not identical to |
| # the two character 'Country' code for its country, |
| # E.g. 'Danmark/dk' versus 'Danish/da'. |
| # |
| # Note 3: In the case of 'ltz' we violate the RFC by using a three char |
| # specifier. There is 'work in progress' to fix this and get |
| # the reference data for rfc1766 cleaned up. |
| # |
| # Danish (da) - Dutch (nl) - English (en) - Estonian (et) |
| # French (fr) - German (de) - Greek-Modern (el) |
| # Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (kr) |
| # Portugese (pt) - Luxembourgeois* (ltz) |
| # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz) |
| # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) |
| # Russian (ru) - Croatian (hr) |
| # |
| AddLanguage da .dk |
| AddLanguage nl .nl |
| AddLanguage en .en |
| AddLanguage et .et |
| AddLanguage fr .fr |
| AddLanguage de .de |
| AddLanguage he .he |
| AddLanguage el .el |
| AddLanguage it .it |
| AddLanguage ja .ja |
| AddLanguage pl .po |
| AddLanguage kr .kr |
| AddLanguage pt .pt |
| AddLanguage nn .nn |
| AddLanguage no .no |
| AddLanguage pt-br .pt-br |
| AddLanguage ltz .ltz |
| AddLanguage ca .ca |
| AddLanguage es .es |
| AddLanguage sv .se |
| AddLanguage cz .cz |
| AddLanguage ru .ru |
| AddLanguage tw .tw |
| AddLanguage zh-tw .tw |
| AddLanguage hr .hr |
| |
| # |
| # LanguagePriority allows you to give precedence to some languages |
| # in case of a tie during content negotiation. |
| # |
| # Just list the languages in decreasing order of preference. We have |
| # more or less alphabetized them here. You probably want to change this. |
| # |
| LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ltz ca es sv tw |
| |
| # |
| # ForceLanguagePriority allows you to serve a result page rather than |
| # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) |
| # [in case no accepted languages matched the available variants] |
| # |
| ForceLanguagePriority Prefer Fallback |
| |
| # |
| # Specify a default charset for all pages sent out. This is |
| # always a good idea and opens the door for future internationalisation |
| # of your web site, should you ever want it. Specifying it as |
| # a default does little harm; as the standard dictates that a page |
| # is in iso-8859-1 (latin1) unless specified otherwise i.e. you |
| # are merely stating the obvious. There are also some security |
| # reasons in browsers, related to javascript and URL parsing |
| # which encourage you to always set a default char set. |
| # |
| AddDefaultCharset ISO-8859-1 |
| |
| # |
| # Commonly used filename extensions to character sets. You probably |
| # want to avoid clashes with the language extensions, unless you |
| # are good at carefully testing your setup after each change. |
| # See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets for |
| # the official list of charset names and their respective RFCs |
| # |
| AddCharset ISO-8859-1 .iso8859-1 .latin1 |
| AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen |
| AddCharset ISO-8859-3 .iso8859-3 .latin3 |
| AddCharset ISO-8859-4 .iso8859-4 .latin4 |
| AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru |
| AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb |
| AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk |
| AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb |
| AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk |
| AddCharset ISO-2022-JP .iso2022-jp .jis |
| AddCharset ISO-2022-KR .iso2022-kr .kis |
| AddCharset ISO-2022-CN .iso2022-cn .cis |
| AddCharset Big5 .Big5 .big5 |
| # For russian, more than one charset is used (depends on client, mostly): |
| AddCharset WINDOWS-1251 .cp-1251 .win-1251 |
| AddCharset CP866 .cp866 |
| AddCharset KOI8-r .koi8-r .koi8-ru |
| AddCharset KOI8-ru .koi8-uk .ua |
| AddCharset ISO-10646-UCS-2 .ucs2 |
| AddCharset ISO-10646-UCS-4 .ucs4 |
| AddCharset UTF-8 .utf8 |
| |
| # The set below does not map to a specific (iso) standard |
| # but works on a fairly wide range of browsers. Note that |
| # capitalization actually matters (it should not, but it |
| # does for some browsers). |
| # |
| # See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets |
| # for a list of sorts. But browsers support few. |
| # |
| AddCharset GB2312 .gb2312 .gb |
| AddCharset utf-7 .utf7 |
| AddCharset utf-8 .utf8 |
| AddCharset big5 .big5 .b5 |
| AddCharset EUC-TW .euc-tw |
| AddCharset EUC-JP .euc-jp |
| AddCharset EUC-KR .euc-kr |
| AddCharset shift_jis .sjis |
| |
| # |
| # AddType allows you to add to or override the MIME configuration |
| # file mime.types for specific file types. |
| # |
| AddType application/x-tar .tgz |
| |
| # |
| # AddHandler allows you to map certain file extensions to "handlers": |
| # actions unrelated to filetype. These can be either built into the server |
| # or added with the Action directive (see below) |
| # |
| # To use CGI scripts outside of ScriptAliased directories: |
| # (You will also need to add "ExecCGI" to the "Options" directive.) |
| # |
| #AddHandler cgi-script .cgi |
| |
| # |
| # For files that include their own HTTP headers: |
| # |
| #AddHandler send-as-is asis |
| |
| # |
| # For server-parsed imagemap files: |
| # |
| #AddHandler imap-file map |
| |
| # |
| # For type maps (negotiated resources): |
| # (This is enabled by default to allow the Apache "It Worked" page |
| # to be distributed in multiple languages.) |
| # |
| AddHandler type-map var |
| |
| # Filters allow you to process content before it is sent to the client. |
| # |
| # To parse .shtml files for server-side includes (SSI): |
| # (You will also need to add "Includes" to the "Options" directive.) |
| # |
| #AddOutputFilter INCLUDES .shtml |
| |
| # |
| # Action lets you define media types that will execute a script whenever |
| # a matching file is called. This eliminates the need for repeated URL |
| # pathnames for oft-used CGI file processors. |
| # Format: Action media/type /cgi-script/location |
| # Format: Action handler-name /cgi-script/location |
| # |
| |
| # |
| # Customizable error responses come in three flavors: |
| # 1) plain text 2) local redirects 3) external redirects |
| # |
| # Some examples: |
| #ErrorDocument 500 "The server made a boo boo." |
| #ErrorDocument 404 /missing.html |
| #ErrorDocument 404 "/cgi-bin/missing_handler.pl" |
| #ErrorDocument 402 http://www.example.com/subscription_info.html |
| # |
| |
| # |
| # Putting this all together, we can Internationalize error responses. |
| # |
| # We use Alias to redirect any /error/HTTP_<error>.html.var response to |
| # our collection of by-error message multi-language collections. We use |
| # includes to substitute the appropriate text. |
| # |
| # You can modify the messages' appearance without changing any of the |
| # default HTTP_<error>.html.var files by adding the line; |
| # |
| # Alias /error/include/ "/your/include/path/" |
| # |
| # which allows you to create your own set of files by starting with the |
| # @@ServerRoot@@/error/include/ files and |
| # copying them to /your/include/path/, even on a per-VirtualHost basis. |
| # |
| |
| <IfModule mod_negotiation.c> |
| <IfModule mod_include.c> |
| Alias /error/ "@@ServerRoot@@/error/" |
| |
| <Directory "@@ServerRoot@@/error"> |
| AllowOverride None |
| Options IncludesNoExec |
| AddOutputFilter Includes html |
| AddHandler type-map var |
| Order allow,deny |
| Allow from all |
| LanguagePriority en es de fr |
| ForceLanguagePriority Prefer Fallback |
| </Directory> |
| |
| ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var |
| ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var |
| ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var |
| ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var |
| ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var |
| ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var |
| ErrorDocument 410 /error/HTTP_GONE.html.var |
| ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var |
| ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var |
| ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var |
| ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var |
| ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var |
| ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var |
| ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var |
| ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var |
| ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var |
| ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var |
| |
| </IfModule> |
| </IfModule> |
| |
| # |
| # The following directives modify normal HTTP response behavior to |
| # handle known problems with browser implementations. |
| # |
| BrowserMatch "Mozilla/2" nokeepalive |
| BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 |
| BrowserMatch "RealPlayer 4\.0" force-response-1.0 |
| BrowserMatch "Java/1\.0" force-response-1.0 |
| BrowserMatch "JDK/1\.0" force-response-1.0 |
| |
| # |
| # The following directive disables redirects on non-GET requests for |
| # a directory that does not include the trailing slash. This fixes a |
| # problem with Microsoft WebFolders which does not appropriately handle |
| # redirects for folders with DAV methods. |
| # |
| BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully |
| BrowserMatch "^WebDrive" redirect-carefully |
| |
| # |
| # Allow server status reports, with the URL of http://servername/server-status |
| # Change the ".your-domain.com" to match your domain to enable. |
| # |
| #<Location /server-status> |
| # SetHandler server-status |
| # Order deny,allow |
| # Deny from all |
| # Allow from .your-domain.com |
| #</Location> |
| |
| # |
| # Allow remote server configuration reports, with the URL of |
| # http://servername/server-info (requires that mod_info.c be loaded). |
| # Change the ".your-domain.com" to match your domain to enable. |
| # |
| #<Location /server-info> |
| # SetHandler server-info |
| # Order deny,allow |
| # Deny from all |
| # Allow from .your-domain.com |
| #</Location> |
| |
| # |
| # Proxy Server directives. Uncomment the following lines to |
| # enable the proxy server: |
| # |
| #<IfModule mod_proxy.c> |
| #ProxyRequests On |
| # |
| #<Proxy *> |
| # Order deny,allow |
| # Deny from all |
| # Allow from .your-domain.com |
| #</Proxy> |
| |
| # |
| # Enable/disable the handling of HTTP/1.1 "Via:" headers. |
| # ("Full" adds the server version; "Block" removes all outgoing Via: headers) |
| # Set to one of: Off | On | Full | Block |
| # |
| #ProxyVia On |
| |
| # |
| # To enable the cache as well, edit and uncomment the following lines: |
| # (no cacheing without CacheRoot) |
| # |
| #CacheRoot "@@ServerRoot@@/proxy" |
| #CacheSize 5 |
| #CacheGcInterval 4 |
| #CacheMaxExpire 24 |
| #CacheLastModifiedFactor 0.1 |
| #CacheDefaultExpire 1 |
| #NoCache a-domain.com another-domain.edu joes.garage-sale.com |
| |
| #</IfModule> |
| # End of proxy directives. |
| |
| # |
| # Bring in additional module-specific configurations |
| # |
| <IfModule mod_ssl.c> |
| Include conf/ssl.conf |
| </IfModule> |
| |
| |
| ### Section 3: Virtual Hosts |
| # |
| # VirtualHost: If you want to maintain multiple domains/hostnames on your |
| # machine you can setup VirtualHost containers for them. Most configurations |
| # use only name-based virtual hosts so the server doesn't need to worry about |
| # IP addresses. This is indicated by the asterisks in the directives below. |
| # |
| # Please see the documentation at |
| # <URL:http://httpd.apache.org/docs-2.0/vhosts/> |
| # for further details before you try to setup virtual hosts. |
| # |
| # You may use the command line option '-S' to verify your virtual host |
| # configuration. |
| |
| # |
| # Use name-based virtual hosting. |
| # |
| #NameVirtualHost * |
| |
| # |
| # VirtualHost example: |
| # Almost any Apache directive may go into a VirtualHost container. |
| # The first VirtualHost section is used for requests without a known |
| # server name. |
| # |
| #<VirtualHost *> |
| # ServerAdmin webmaster@dummy-host.example.com |
| # DocumentRoot /www/docs/dummy-host.example.com |
| # ServerName dummy-host.example.com |
| # ErrorLog logs/dummy-host.example.com-error_log |
| # CustomLog logs/dummy-host.example.com-access_log common |
| #</VirtualHost> |