| |
| # Makefile.in for PCRE (Perl-Compatible Regular Expression) library. |
| |
| #---------------------------------------------------------------------------# |
| # To build mingw32 DLL uncomment the next two lines. This addition for # |
| # mingw32 was contributed by <Paul.Sokolovsky@technologist.com>. I (Philip # |
| # Hazel) don't know anything about it! There are some additional targets at # |
| # the bottom of this Makefile. # |
| #---------------------------------------------------------------------------# |
| # |
| # include dll.mk |
| # DLL_LDFLAGS=-s |
| |
| |
| #---------------------------------------------------------------------------# |
| # The next few lines are modified by "configure" to insert data that it is # |
| # given in its arguments, or which it finds out for itself. # |
| #---------------------------------------------------------------------------# |
| |
| # BINDIR is the directory in which the pgrep command is installed. |
| # INCDIR is the directory in which the public header file pcre.h is installed. |
| # LIBDIR is the directory in which the libraries are installed. |
| # MANDIR is the directory in which the man pages are installed. |
| # The pcretest program, as it is a test program, does not get installed |
| # anywhere. |
| |
| prefix = @prefix@ |
| exec_prefix = @exec_prefix@ |
| |
| BINDIR = @bindir@ |
| LIBDIR = @libdir@ |
| INCDIR = @includedir@ |
| MANDIR = @mandir@ |
| |
| CC = @CC@ |
| CFLAGS = @CFLAGS@ |
| RANLIB = @RANLIB@ |
| |
| # LIBTOOL defaults to "", which cuts out the building of shared libraries. |
| # If "configure" is called with --enable-shared-libraries, then LIBTOOL is |
| # set to "libtool", which causes shared libraries to be built, and LIBSUFFIX |
| # is set to "la" instead of "a", which causes the shared libraries to be |
| # installed. |
| |
| LIBTOOL = @LIBTOOL@ |
| LIBSUFFIX = @LIBSUFFIX@ |
| |
| # These are the version numbers for the shared libraries |
| |
| PCRELIBVERSION = @PCRE_LIB_VERSION@ |
| PCREPOSIXLIBVERSION = @PCRE_POSIXLIB_VERSION@ |
| |
| |
| #---------------------------------------------------------------------------# |
| # A copy of install-sh is in this distribution and is used by default. # |
| #---------------------------------------------------------------------------# |
| |
| INSTALL = ./install-sh -c |
| INSTALL_DATA = ${INSTALL} -m 644 |
| |
| |
| #---------------------------------------------------------------------------# |
| # For almost all systems, the command to create a library is "ar cq", but # |
| # there is at least one where it is different, to make this configurable. # |
| # However, I haven't got round to learning how to make "configure" find # |
| # this out for itself. It is necessary to use a command such as # |
| # "make AR='ar -rc'" if you need to vary this. # |
| #---------------------------------------------------------------------------# |
| |
| AR = ar cq |
| |
| |
| ############################################################################## |
| |
| |
| OBJ = maketables.o get.o study.o pcre.o |
| LOBJ = maketables.lo get.lo study.lo pcre.lo |
| |
| all: libtool libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) pcretest pgrep |
| |
| libtool: config.guess config.sub ltconfig ltmain.sh |
| @if test "$(LIBTOOL)" = "libtool"; then \ |
| echo '--- Building libtool ---'; \ |
| ./ltconfig ./ltmain.sh; \ |
| echo '--- Built libtool ---'; fi |
| |
| pgrep: libpcre.$(LIBSUFFIX) pgrep.o |
| @echo ' ' |
| @echo '--- Building pgrep utility' |
| @echo ' ' |
| $(LIBTOOL) $(CC) $(CFLAGS) -o pgrep pgrep.o libpcre.$(LIBSUFFIX) |
| |
| pcretest: libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) pcretest.o |
| @echo ' ' |
| @echo '--- Building pcretest testing program' |
| @echo ' ' |
| $(LIBTOOL) $(PURIFY) $(CC) $(CFLAGS) -o pcretest pcretest.o \ |
| libpcre.$(LIBSUFFIX) libpcreposix.$(LIBSUFFIX) |
| |
| libpcre.a: $(OBJ) |
| @echo ' ' |
| @echo '--- Building static library: libpcre' |
| @echo ' ' |
| -rm -f libpcre.a |
| $(AR) libpcre.a $(OBJ) |
| $(RANLIB) libpcre.a |
| |
| libpcre.la: $(OBJ) |
| @echo ' ' |
| @echo '--- Building shared library: libpcre' |
| @echo ' ' |
| -rm -f libpcre.la |
| libtool $(CC) -version-info '$(PCRELIBVERSION)' -o libpcre.la -rpath $(LIBDIR) $(LOBJ) |
| |
| libpcreposix.a: pcreposix.o |
| @echo ' ' |
| @echo '--- Building static library: libpcreposix' |
| @echo ' ' |
| -rm -f libpcreposix.a |
| $(AR) libpcreposix.a pcreposix.o |
| $(RANLIB) libpcreposix.a |
| |
| libpcreposix.la: pcreposix.o |
| @echo ' ' |
| @echo '--- Building shared library: libpcreposix' |
| @echo ' ' |
| -rm -f libpcreposix.la |
| libtool $(CC) -version-info '$(PCREPOSIXLIBVERSION)' -o libpcreposix.la -rpath $(LIBDIR) pcreposix.lo |
| |
| pcre.o: chartables.c pcre.c pcre.h internal.h config.h Makefile |
| $(LIBTOOL) $(CC) -c $(CFLAGS) pcre.c |
| |
| pcreposix.o: pcreposix.c pcreposix.h internal.h pcre.h config.h Makefile |
| $(LIBTOOL) $(CC) -c $(CFLAGS) pcreposix.c |
| |
| maketables.o: maketables.c pcre.h internal.h config.h Makefile |
| $(LIBTOOL) $(CC) -c $(CFLAGS) maketables.c |
| |
| get.o: get.c pcre.h internal.h config.h Makefile |
| $(LIBTOOL) $(CC) -c $(CFLAGS) get.c |
| |
| study.o: study.c pcre.h internal.h config.h Makefile |
| $(LIBTOOL) $(CC) -c $(CFLAGS) study.c |
| |
| pcretest.o: pcretest.c pcre.h config.h Makefile |
| $(CC) -c $(CFLAGS) pcretest.c |
| |
| pgrep.o: pgrep.c pcre.h Makefile config.h |
| $(CC) -c $(CFLAGS) pgrep.c |
| |
| # An auxiliary program makes the default character table source |
| |
| chartables.c: dftables |
| ./dftables >chartables.c |
| |
| dftables: dftables.c maketables.c pcre.h internal.h config.h Makefile |
| $(CC) -o dftables $(CFLAGS) dftables.c |
| |
| install: all |
| $(LIBTOOL) $(INSTALL_DATA) libpcre.$(LIBSUFFIX) $(LIBDIR)/libpcre.$(LIBSUFFIX) |
| $(LIBTOOL) $(INSTALL_DATA) libpcreposix.$(LIBSUFFIX) $(LIBDIR)/libpcreposix.$(LIBSUFFIX) |
| $(INSTALL_DATA) pcre.h $(INCDIR)/pcre.h |
| $(INSTALL_DATA) pcreposix.h $(INCDIR)/pcreposix.h |
| $(INSTALL_DATA) doc/pcre.3 $(MANDIR)/man3/pcre.3 |
| $(INSTALL_DATA) doc/pcreposix.3 $(MANDIR)/man3/pcreposix.3 |
| $(INSTALL_DATA) doc/pgrep.1 $(MANDIR)/man1/pgrep.1 |
| @if test "$(LIBTOOL)" = "libtool"; then \ |
| echo ' '; \ |
| echo '--- Rebuilding pgrep to use installed shared library ---'; \ |
| echo $(CC) $(CFLAGS) -o pgrep pgrep.o -L$(LIBDIR) -lpcre; \ |
| $(CC) $(CFLAGS) -o pgrep pgrep.o -L$(LIBDIR) -lpcre; \ |
| echo '--- Rebuilding pcretest to use installed shared library ---'; \ |
| echo $(CC) $(CFLAGS) -o pcretest pcretest.o -L$(LIBDIR) -lpcre -lpcreposix; \ |
| $(CC) $(CFLAGS) -o pcretest pcretest.o -L$(LIBDIR) -lpcre -lpcreposix; \ |
| fi |
| $(INSTALL) pgrep $(BINDIR)/pgrep |
| $(INSTALL) pcre-config $(BINDIR)/pcre-config |
| |
| # We deliberately omit dftables and chartables.c from 'make clean'; once made |
| # chartables.c shouldn't change, and if people have edited the tables by hand, |
| # you don't want to throw them away. |
| |
| clean:; -rm -rf *.o *.lo *.a *.la .libs pcretest pgrep testtry |
| |
| # But "make distclean" should get back to a virgin distribution |
| |
| distclean: clean |
| -rm -f chartables.c libtool pcre-config pcre.h \ |
| Makefile config.h config.status config.log config.cache |
| |
| check: runtest |
| |
| runtest: all |
| ./RunTest |
| |
| ######## MINGW32 ############### MINGW32 ############### MINGW32 ############# |
| |
| # This addition for mingw32 was contributed by Paul Sokolovsky |
| # <Paul.Sokolovsky@technologist.com>. I (PH) don't know anything about it! |
| |
| dll: _dll libpcre.dll.a pgrep_d pcretest_d |
| |
| _dll: |
| $(MAKE) CFLAGS=-DSTATIC pcre.dll |
| |
| pcre.dll: $(OBJ) pcreposix.o pcre.def |
| libpcre.dll.a: pcre.def |
| |
| pgrep_d: libpcre.dll.a pgrep.o |
| $(CC) $(CFLAGS) -L. -o pgrep pgrep.o -lpcre.dll |
| |
| pcretest_d: libpcre.dll.a pcretest.o |
| $(PURIFY) $(CC) $(CFLAGS) -L. -o pcretest pcretest.o -lpcre.dll |
| |
| # End |