| /* Licensed to the Apache Software Foundation (ASF) under one or more |
| * contributor license agreements. See the NOTICE file distributed with |
| * this work for additional information regarding copyright ownership. |
| * The ASF licenses this file to You under the Apache License, Version 2.0 |
| * (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* |
| ** This program is based on ZeusBench V1.0 written by Adam Twiss |
| ** which is Copyright (c) 1996 by Zeus Technology Ltd. |
| ** http://web.archive.org/web/20000304112933/http://www.zeustech.net/ |
| ** |
| ** This software is provided "as is" and any express or implied warranties, |
| ** including but not limited to, the implied warranties of merchantability and |
| ** fitness for a particular purpose are disclaimed. In no event shall |
| ** Zeus Technology Ltd. be liable for any direct, indirect, incidental, special, |
| ** exemplary, or consequential damaged (including, but not limited to, |
| ** procurement of substitute good or services; loss of use, data, or profits; |
| ** or business interruption) however caused and on theory of liability. Whether |
| ** in contract, strict liability or tort (including negligence or otherwise) |
| ** arising in any way out of the use of this software, even if advised of the |
| ** possibility of such damage. |
| ** |
| */ |
| |
| /* |
| ** HISTORY: |
| ** - Originally written by Adam Twiss <adam@zeus.co.uk>, March 1996 |
| ** with input from Mike Belshe <mbelshe@netscape.com> and |
| ** Michael Campanella <campanella@stevms.enet.dec.com> |
| ** - Enhanced by Dean Gaudet <dgaudet@apache.org>, November 1997 |
| ** - Cleaned up by Ralf S. Engelschall <rse@apache.org>, March 1998 |
| ** - POST and verbosity by Kurt Sussman <kls@merlot.com>, August 1998 |
| ** - HTML table output added by David N. Welton <davidw@prosa.it>, January 1999 |
| ** - Added Cookie, Arbitrary header and auth support. <dirkx@webweaving.org>, April 1999 |
| ** Version 1.3d |
| ** - Increased version number - as some of the socket/error handling has |
| ** fundamentally changed - and will give fundamentally different results |
| ** in situations where a server is dropping requests. Therefore you can |
| ** no longer compare results of AB as easily. Hence the inc of the version. |
| ** They should be closer to the truth though. Sander & <dirkx@covalent.net>, End 2000. |
| ** - Fixed proxy functionality, added median/mean statistics, added gnuplot |
| ** output option, added _experimental/rudimentary_ SSL support. Added |
| ** confidence guestimators and warnings. Sander & <dirkx@covalent.net>, End 2000 |
| ** - Fixed serious int overflow issues which would cause realistic (longer |
| ** than a few minutes) run's to have wrong (but believable) results. Added |
| ** trapping of connection errors which influenced measurements. |
| ** Contributed by Sander Temme, Early 2001 |
| ** Version 1.3e |
| ** - Changed timeout behavior during write to work whilst the sockets |
| ** are filling up and apr_write() does writes a few - but not all. |
| ** This will potentially change results. <dirkx@webweaving.org>, April 2001 |
| ** Version 2.0.36-dev |
| ** Improvements to concurrent processing: |
| ** - Enabled non-blocking connect()s. |
| ** - Prevent blocking calls to apr_socket_recv() (thereby allowing AB to |
| ** manage its entire set of socket descriptors). |
| ** - Any error returned from apr_socket_recv() that is not EAGAIN or EOF |
| ** is now treated as fatal. |
| ** Contributed by Aaron Bannert, April 24, 2002 |
| ** |
| ** Version 2.0.36-2 |
| ** Internalized the version string - this string is part |
| ** of the Agent: header and the result output. |
| ** |
| ** Version 2.0.37-dev |
| ** Adopted SSL code by Madhu Mathihalli <madhusudan_mathihalli@hp.com> |
| ** [PATCH] ab with SSL support Posted Wed, 15 Aug 2001 20:55:06 GMT |
| ** Introduces four 'if (int == value)' tests per non-ssl request. |
| ** |
| ** Version 2.0.40-dev |
| ** Switched to the new abstract pollset API, allowing ab to |
| ** take advantage of future apr_pollset_t scalability improvements. |
| ** Contributed by Brian Pane, August 31, 2002 |
| ** |
| ** Version 2.3 |
| ** SIGINT now triggers output_results(). |
| ** Contributed by colm, March 30, 2006 |
| **/ |
| |
| /* Note: this version string should start with \d+[\d\.]* and be a valid |
| * string for an HTTP Agent: header when prefixed with 'ApacheBench/'. |
| * It should reflect the version of AB - and not that of the apache server |
| * it happens to accompany. And it should be updated or changed whenever |
| * the results are no longer fundamentally comparable to the results of |
| * a previous version of ab. Either due to a change in the logic of |
| * ab - or to due to a change in the distribution it is compiled with |
| * (such as an APR change in for example blocking). |
| */ |
| #define AP_AB_BASEREVISION "2.3" |
| |
| /* |
| * BUGS: |
| * |
| * - uses strcpy/etc. |
| * - has various other poor buffer attacks related to the lazy parsing of |
| * response headers from the server |
| * - doesn't implement much of HTTP/1.x, only accepts certain forms of |
| * responses |
| * - (performance problem) heavy use of strstr shows up top in profile |
| * only an issue for loopback usage |
| */ |
| |
| /* -------------------------------------------------------------------- */ |
| |
| #if 'A' != 0x41 |
| /* Hmmm... This source code isn't being compiled in ASCII. |
| * In order for data that flows over the network to make |
| * sense, we need to translate to/from ASCII. |
| */ |
| #define NOT_ASCII |
| #endif |
| |
| /* affects include files on Solaris */ |
| #define BSD_COMP |
| |
| #include "apr.h" |
| #include "apr_signal.h" |
| #include "apr_strings.h" |
| #include "apr_network_io.h" |
| #include "apr_file_io.h" |
| #include "apr_ring.h" |
| #include "apr_time.h" |
| #include "apr_getopt.h" |
| #include "apr_general.h" |
| #include "apr_lib.h" |
| #include "apr_portable.h" |
| #include "ap_release.h" |
| #include "apr_poll.h" |
| |
| #include "apr_atomic.h" |
| #if APR_HAS_THREADS |
| #include "apr_thread_proc.h" |
| #include "apr_thread_mutex.h" |
| #include "apr_thread_cond.h" |
| #if APR_HAVE_PTHREAD_H |
| #include <pthread.h> |
| #endif |
| #endif |
| |
| #define APR_WANT_STRFUNC |
| #include "apr_want.h" |
| |
| #include "apr_base64.h" |
| #ifdef NOT_ASCII |
| #include "apr_xlate.h" |
| #endif |
| |
| #if APR_HAVE_STDIO_H |
| #include <stdio.h> |
| #endif |
| #if APR_HAVE_STDLIB_H |
| #include <stdlib.h> |
| #endif |
| #if APR_HAVE_UNISTD_H |
| #include <unistd.h> /* for getpid() */ |
| #endif |
| |
| #if !defined(WIN32) && !defined(NETWARE) |
| #include "ap_config_auto.h" |
| #endif |
| |
| #include <math.h> |
| #if APR_HAVE_CTYPE_H |
| #include <ctype.h> |
| #endif |
| #if APR_HAVE_LIMITS_H |
| #include <limits.h> |
| #endif |
| #include <assert.h> |
| |
| #if defined(HAVE_OPENSSL) |
| |
| #include <openssl/evp.h> |
| #include <openssl/crypto.h> |
| #include <openssl/x509.h> |
| #include <openssl/pem.h> |
| #include <openssl/err.h> |
| #include <openssl/ssl.h> |
| #include <openssl/rand.h> |
| #include <openssl/opensslv.h> |
| #if OPENSSL_VERSION_NUMBER >= 0x30000000L |
| #include <openssl/core_names.h> |
| #endif |
| |
| #define USE_SSL |
| |
| #define SK_NUM(x) sk_X509_num(x) |
| #define SK_VALUE(x,y) sk_X509_value(x,y) |
| typedef STACK_OF(X509) X509_STACK_TYPE; |
| |
| #if defined(_MSC_VER) && !defined(LIBRESSL_VERSION_NUMBER) |
| /* The following logic ensures we correctly glue FILE* within one CRT used |
| * by the OpenSSL library build to another CRT used by the ab.exe build. |
| * This became especially problematic with Visual Studio 2015. |
| */ |
| #include <openssl/applink.c> |
| #endif |
| |
| #if (OPENSSL_VERSION_NUMBER >= 0x00909000) |
| #define AB_SSL_METHOD_CONST const |
| #else |
| #define AB_SSL_METHOD_CONST |
| #endif |
| #if (OPENSSL_VERSION_NUMBER >= 0x0090707f) |
| #define AB_SSL_CIPHER_CONST const |
| #else |
| #define AB_SSL_CIPHER_CONST |
| #endif |
| #ifdef SSL_OP_NO_TLSv1_2 |
| #define HAVE_TLSV1_X |
| #endif |
| #if !defined(OPENSSL_NO_TLSEXT) && defined(SSL_set_tlsext_host_name) |
| #define HAVE_TLSEXT |
| #endif |
| |
| #if defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER < 0x2060000f |
| #define SSL_CTRL_SET_MIN_PROTO_VERSION 123 |
| #define SSL_CTRL_SET_MAX_PROTO_VERSION 124 |
| #define SSL_CTX_set_min_proto_version(ctx, version) \ |
| SSL_CTX_ctrl(ctx, SSL_CTRL_SET_MIN_PROTO_VERSION, version, NULL) |
| #define SSL_CTX_set_max_proto_version(ctx, version) \ |
| SSL_CTX_ctrl(ctx, SSL_CTRL_SET_MAX_PROTO_VERSION, version, NULL) |
| #endif |
| |
| #if OPENSSL_VERSION_NUMBER >= 0x10100000L |
| #ifdef TLS1_3_VERSION |
| #define MAX_SSL_PROTO TLS1_3_VERSION |
| #else |
| #define MAX_SSL_PROTO TLS1_2_VERSION |
| #endif |
| #ifndef OPENSSL_NO_SSL3 |
| #define MIN_SSL_PROTO SSL3_VERSION |
| #else |
| #define MIN_SSL_PROTO TLS1_VERSION |
| #endif |
| #endif /* OPENSSL_VERSION_NUMBER >= 0x10100000L */ |
| |
| #endif /* HAVE_OPENSSL */ |
| |
| /* ------------------- DEFINITIONS -------------------------- */ |
| |
| #if defined(APR_INT64_MAX) |
| #define AB_TIME_MAX APR_INT64_MAX |
| #elif defined(LLONG_MAX) |
| #define AB_TIME_MAX LLONG_MAX |
| #else |
| #define AB_TIME_MAX APR_INT64_C(0x7fffffffffffffff) |
| #endif |
| |
| /* default number of requests on a time limited test */ |
| #define TIMED_REQUESTS (INT_MAX > 50000 ? 50000 : INT_MAX) |
| |
| #define ROUND_UP(x, y) ((((x) + (y) - 1) / (y)) * (y)) |
| |
| static int test_started = 0, |
| test_aborted = 0; |
| |
| /* connection state |
| * don't add enums or rearrange or otherwise change values without |
| * visiting set_conn_state() |
| */ |
| typedef enum { |
| STATE_DISCONNECTED = 0, |
| STATE_CONNECTING, /* TCP connect initiated, but we don't |
| * know if it worked yet |
| */ |
| #ifdef USE_SSL |
| STATE_HANDSHAKE, /* in the handshake phase */ |
| #endif |
| STATE_WRITE, /* in the write phase */ |
| STATE_READ, /* in the read phase */ |
| |
| STATE_COUNT |
| } conn_state_e; |
| |
| const char *conn_state_str[STATE_COUNT] = { |
| "DISCONNECTED", |
| "CONNECTING", |
| #ifdef USE_SSL |
| "HANDSHAKE", |
| #endif |
| "WRITE", |
| "READ" |
| }; |
| |
| #define CBUFFSIZE (8192) |
| |
| /* forward declare */ |
| struct worker; |
| |
| struct connection { |
| APR_RING_ENTRY(connection) delay_list; |
| struct worker *worker; |
| apr_pool_t *ctx; |
| apr_socket_t *aprsock; |
| apr_pollfd_t pollfd; |
| int state; |
| apr_time_t delay; |
| apr_size_t read; /* amount of bytes read */ |
| apr_size_t bread; /* amount of body read */ |
| apr_size_t rwrite, rwrote; /* keep pointers in what we write - across |
| * EAGAINs */ |
| apr_size_t length; /* Content-Length value used for keep-alive */ |
| char cbuff[CBUFFSIZE]; /* a buffer to store server response header */ |
| int cbx; /* offset in cbuffer */ |
| int keepalive; /* non-zero if a keep-alive request */ |
| int gotheader; /* non-zero if we have the entire header in |
| * cbuff */ |
| apr_time_t start, /* Start of connection */ |
| connect, /* Connected, start writing */ |
| endwrite, /* Request written */ |
| beginread, /* First byte of input */ |
| end; /* Connection closed */ |
| |
| apr_size_t keptalive; /* subsequent keepalive requests */ |
| #ifdef USE_SSL |
| SSL *ssl; |
| #endif |
| }; |
| |
| struct data { |
| apr_time_t starttime; /* start time of connection */ |
| apr_interval_time_t waittime; /* between request and reading response */ |
| apr_interval_time_t ctime; /* time to connect */ |
| apr_interval_time_t time; /* time for connection */ |
| }; |
| |
| struct metrics { |
| apr_size_t doclen; /* the length the document should be */ |
| apr_int64_t totalread; /* total number of bytes read */ |
| apr_int64_t totalbread; /* totoal amount of entity body read */ |
| apr_int64_t totalposted; /* total number of bytes posted, inc. headers */ |
| apr_int64_t done; /* number of requests we have done */ |
| apr_int64_t doneka; /* number of keep alive connections done */ |
| apr_int64_t good, bad; /* number of good and bad requests */ |
| int epipe; /* number of broken pipe writes */ |
| int err_length; /* requests failed due to response length */ |
| int err_conn; /* requests failed due to connection drop */ |
| int err_recv; /* requests failed due to broken read */ |
| int err_except; /* requests failed due to exception */ |
| int err_response; /* requests with invalid or non-200 response */ |
| int aborted_ka; /* requests aborted during keepalive (no data) */ |
| int concurrent; /* Number of multiple requests actually made */ |
| #ifdef USE_SSL |
| char ssl_info[128]; |
| #if OPENSSL_VERSION_NUMBER >= 0x10002000L |
| char ssl_tmp_key[128]; |
| #endif |
| #endif |
| }; |
| |
| APR_RING_HEAD(delayed_ring_t, connection); |
| |
| struct worker { |
| apr_pool_t *pool; |
| #if APR_HAS_THREADS |
| apr_thread_t *thd; |
| #endif |
| apr_pollset_t *pollset; |
| apr_sockaddr_t *destsa; |
| |
| int slot; |
| int requests; |
| int concurrency; |
| int polls; /* number of connections polled */ |
| int bind_rr; /* next address to bind (round robin) */ |
| int succeeded_once; /* response header received once */ |
| apr_int64_t started; /* number of requests started, so no excess */ |
| |
| struct data *stats; |
| struct connection *conns; |
| struct delayed_ring_t delayed_ring; |
| |
| struct metrics metrics; |
| int counters[STATE_COUNT][2]; |
| char tmp[1024]; |
| |
| char buffer[CBUFFSIZE]; /* throw-away buffer to read stuff into */ |
| }; |
| |
| /* global metrics (consolidated from workers') */ |
| static struct metrics metrics; |
| static void consolidate_metrics(void); |
| |
| #define ap_min(a,b) (((a)<(b))?(a):(b)) |
| #define ap_max(a,b) (((a)>(b))?(a):(b)) |
| #define ap_round_ms(a) ((apr_time_t)((a) + 500)/1000) |
| #define ap_double_ms(a) ((double)(a)/1000.0) |
| #define MAX_CONCURRENCY 200000 |
| |
| /* --------------------- GLOBALS ---------------------------- */ |
| |
| int verbosity = 0; /* no verbosity by default */ |
| int recverrok = 0; /* ok to proceed after socket receive errors */ |
| enum {NO_METH = 0, GET, HEAD, PUT, POST, CUSTOM_METHOD} method = NO_METH; |
| const char *method_str[] = {"bug", "GET", "HEAD", "PUT", "POST", ""}; |
| int send_body = 0; /* non-zero if sending body with request */ |
| int requests = 0; /* Number of requests to make */ |
| int num_workers = 1; /* Number of worker threads to use */ |
| int no_banner = 0; /* Do not show copyright banner */ |
| int heartbeatres = 100; /* How often do we say we're alive */ |
| int concurrency = 1; /* Number of multiple requests to make */ |
| int percentile = 1; /* Show percentile served */ |
| int nolength = 0; /* Accept variable document length */ |
| int confidence = 1; /* Show confidence estimator and warnings */ |
| int tlimit = 0; /* time limit in secs */ |
| int rlimited = 0; /* whether there is a requests limit */ |
| int keepalive = 0; /* try and do keepalive connections */ |
| int windowsize = 0; /* we use the OS default window size */ |
| char servername[1024]; /* name that server reports */ |
| char *hostname; /* host name from URL */ |
| const char *host_field; /* value of "Host:" header field */ |
| const char *path; /* path name */ |
| char *postdata; /* *buffer containing data from postfile */ |
| apr_size_t postlen = 0; /* length of data to be POSTed */ |
| char *content_type = NULL; /* content type to put in POST header */ |
| const char *cookie, /* optional cookie line */ |
| *auth, /* optional (basic/uuencoded) auhentication */ |
| *hdrs; /* optional arbitrary headers */ |
| apr_port_t port; /* port number */ |
| char *proxyhost = NULL; /* proxy host name */ |
| int proxyport = 0; /* proxy port */ |
| const char *connecthost; |
| int bind_count = 0; |
| const char **bind_hosts; |
| apr_sockaddr_t **bind_addrs; |
| apr_port_t connectport; |
| char *src_address; |
| const char *gnuplot; /* GNUplot file */ |
| const char *csvperc; /* CSV Percentile file */ |
| const char *fullurl; |
| const char *colonhost; |
| int isproxy = 0; |
| apr_interval_time_t hbperiod = 0; /* heartbeat period (when time limited) */ |
| apr_interval_time_t aprtimeout = apr_time_from_sec(30); /* timeout value */ |
| apr_interval_time_t ramp = apr_time_from_msec(0); /* ramp delay */ |
| int pollset_wakeable = 0; |
| |
| int watchdog = 0; |
| #define WATCHDOG_TIMEOUT apr_time_from_sec(5) |
| |
| /* overrides for ab-generated common headers */ |
| const char *opt_host; /* which optional "Host:" header specified, if any */ |
| int opt_useragent = 0; /* was an optional "User-Agent:" header specified? */ |
| int opt_accept = 0; /* was an optional "Accept:" header specified? */ |
| /* |
| * XXX - this is now a per read/write transact type of value |
| */ |
| |
| int use_html = 0; /* use html in the report */ |
| const char *tablestring; |
| const char *trstring; |
| const char *tdstring; |
| |
| #ifdef USE_SSL |
| int is_ssl; |
| SSL_CTX *ssl_ctx; |
| char *ssl_cipher = NULL; |
| char *ssl_cert = NULL; |
| BIO *bio_out,*bio_err; |
| #ifdef HAVE_TLSEXT |
| int tls_use_sni = 1; /* used by default, -I disables it */ |
| const char *tls_sni = NULL; /* 'opt_host' if any, 'hostname' otherwise */ |
| #endif |
| #endif |
| |
| apr_time_t start, logtime; |
| volatile apr_time_t lasttime, stoptime; |
| |
| /* global request (and its length) */ |
| char _request[8192]; |
| char *request = _request; |
| apr_size_t reqlen; |
| |
| /* interesting percentiles */ |
| int percs[] = {50, 66, 75, 80, 90, 95, 98, 99, 100}; |
| |
| struct worker *workers; /* worker threads */ |
| struct connection *conns; /* connection array */ |
| struct data *stats; /* data for each request */ |
| apr_pool_t *cntxt; |
| |
| apr_sockaddr_t *destsa; |
| |
| #ifdef NOT_ASCII |
| apr_xlate_t *from_ascii, *to_ascii; |
| #endif |
| |
| #if APR_HAS_THREADS |
| static apr_thread_mutex_t *workers_mutex; |
| static apr_thread_cond_t *workers_can_start; |
| #endif |
| |
| static APR_INLINE int worker_should_stop(struct worker *worker) |
| { |
| return (stoptime <= lasttime |
| || (rlimited && worker->metrics.done >= worker->requests)); |
| } |
| static APR_INLINE int worker_can_connect(struct worker *worker) |
| { |
| return !(stoptime <= lasttime |
| || (rlimited && worker->started >= worker->requests)); |
| } |
| |
| static void workers_may_exit(int); |
| |
| static void start_connection(struct connection *c); |
| static void try_reconnect(struct connection *c, apr_status_t status); |
| static void write_request(struct connection *c); |
| static void read_response(struct connection *c); |
| static void finalize_connection(struct connection *c, int reuse); |
| static void close_connection(struct connection *c); |
| |
| static APR_INLINE void shutdown_connection(struct connection *c) |
| { |
| finalize_connection(c, 0); |
| } |
| static APR_INLINE void abort_connection(struct connection *c) |
| { |
| c->gotheader = 0; /* invalidate */ |
| shutdown_connection(c); |
| } |
| |
| static void output_results(void); |
| static void output_html_results(void); |
| |
| /* --------------------------------------------------------- */ |
| |
| /* simple little function to write an error string */ |
| static void print_error(const char *s) |
| { |
| fprintf(stderr, "%s\n", s); |
| fflush(stderr); |
| } |
| static APR_INLINE void graceful_error(const char *s) |
| { |
| print_error(s); |
| workers_may_exit(0); |
| test_aborted = 1; |
| } |
| static APR_INLINE void fatal_error(const char *s) |
| { |
| print_error(s); |
| test_aborted = 1; |
| exit(1); |
| } |
| |
| /* simple little function to write an APR error string */ |
| static void print_strerror(const char *s, apr_status_t rv) |
| { |
| char buf[120]; |
| fprintf(stderr, "%s: %s (%d)\n", |
| s, apr_strerror(rv, buf, sizeof buf), rv); |
| fflush(stderr); |
| } |
| static APR_INLINE void graceful_strerror(const char *s, apr_status_t rv) |
| { |
| print_strerror(s, rv); |
| workers_may_exit(0); |
| test_aborted = 1; |
| } |
| static APR_INLINE void fatal_strerror(const char *s, apr_status_t rv) |
| { |
| print_strerror(s, rv); |
| test_aborted = 1; |
| exit(1); |
| } |
| |
| /* |
| * Similar to standard strstr() but we ignore case in this version. |
| * Copied from ap_strcasestr(). |
| */ |
| static char *xstrcasestr(const char *s1, const char *s2) |
| { |
| char *p1, *p2; |
| if (*s2 == '\0') { |
| /* an empty s2 */ |
| return((char *)s1); |
| } |
| while(1) { |
| for ( ; (*s1 != '\0') && (apr_tolower(*s1) != apr_tolower(*s2)); s1++); |
| if (*s1 == '\0') { |
| return(NULL); |
| } |
| /* found first character of s2, see if the rest matches */ |
| p1 = (char *)s1; |
| p2 = (char *)s2; |
| for (++p1, ++p2; apr_tolower(*p1) == apr_tolower(*p2); ++p1, ++p2) { |
| if (*p1 == '\0') { |
| /* both strings ended together */ |
| return((char *)s1); |
| } |
| } |
| if (*p2 == '\0') { |
| /* second string ended, a match */ |
| break; |
| } |
| /* didn't find a match here, try starting at next character in s1 */ |
| s1++; |
| } |
| return((char *)s1); |
| } |
| |
| /* pool abort function */ |
| static int abort_on_oom(int retcode) |
| { |
| fprintf(stderr, "Could not allocate memory\n"); |
| exit(APR_ENOMEM); |
| /* not reached */ |
| return retcode; |
| } |
| |
| static int set_polled_events(struct connection *c, apr_int16_t new_reqevents) |
| { |
| apr_status_t rv; |
| |
| /* Add POLLHUP and POLLERR to reqevents should some pollset |
| * implementations need/use them. |
| */ |
| if (new_reqevents != 0) { |
| new_reqevents |= APR_POLLERR; |
| if (new_reqevents & APR_POLLIN) { |
| new_reqevents |= APR_POLLHUP; |
| } |
| } |
| |
| if (c->pollfd.reqevents != new_reqevents) { |
| if (c->pollfd.reqevents != 0) { |
| rv = apr_pollset_remove(c->worker->pollset, &c->pollfd); |
| if (rv != APR_SUCCESS && !APR_STATUS_IS_NOTFOUND(rv)) { |
| graceful_strerror("apr_pollset_remove()", rv); |
| return 0; |
| } |
| assert(c->worker->polls > 0); |
| c->worker->polls--; |
| } |
| |
| c->pollfd.reqevents = new_reqevents; |
| if (new_reqevents != 0) { |
| rv = apr_pollset_add(c->worker->pollset, &c->pollfd); |
| if (rv != APR_SUCCESS) { |
| graceful_strerror("apr_pollset_add()", rv); |
| c->pollfd.reqevents = 0; |
| return 0; |
| } |
| c->worker->polls++; |
| } |
| } |
| return 1; |
| } |
| |
| static void set_conn_state(struct connection *c, conn_state_e state, |
| apr_int16_t events) |
| { |
| int (*const counters)[2] = c->worker->counters; |
| |
| assert(counters[c->state][(c->pollfd.reqevents & APR_POLLOUT) != 0] > 0); |
| counters[c->state][(c->pollfd.reqevents & APR_POLLOUT) != 0]--; |
| |
| c->state = state; |
| if (!set_polled_events(c, events) && state != STATE_DISCONNECTED) { |
| close_connection(c); |
| } |
| |
| counters[c->state][(c->pollfd.reqevents & APR_POLLOUT) != 0]++; |
| } |
| |
| /* --------------------------------------------------------- */ |
| /* write out request to a connection - assumes we can write |
| * (small) request out in one go into our new socket buffer |
| * |
| */ |
| #ifdef USE_SSL |
| #if OPENSSL_VERSION_NUMBER >= 0x30000000L |
| static long ssl_print_cb(BIO *bio, int cmd, const char *argp, |
| size_t len, int argi, long argl, int ret, |
| size_t *processed) |
| #else |
| static long ssl_print_cb(BIO *bio, int cmd, const char *argp, |
| int argi, long argl, long ret) |
| #endif |
| { |
| BIO *out; |
| #if OPENSSL_VERSION_NUMBER >= 0x30000000L |
| (void)len; |
| (void)processed; |
| #endif |
| |
| out=(BIO *)BIO_get_callback_arg(bio); |
| if (out == NULL) return(ret); |
| |
| if (cmd == (BIO_CB_READ|BIO_CB_RETURN)) { |
| BIO_printf(out,"read from %p [%p] (%d bytes => %ld (0x%lX))\n", |
| bio, argp, argi, (long)ret, (long)ret); |
| BIO_dump(out,(char *)argp,(int)ret); |
| return(ret); |
| } |
| else if (cmd == (BIO_CB_WRITE|BIO_CB_RETURN)) { |
| BIO_printf(out,"write to %p [%p] (%d bytes => %ld (0x%lX))\n", |
| bio, argp, argi, (long)ret, (long)ret); |
| BIO_dump(out,(char *)argp,(int)ret); |
| } |
| return ret; |
| } |
| |
| static void ssl_state_cb(const SSL *s, int w, int r) |
| { |
| if (w & SSL_CB_ALERT) { |
| BIO_printf(bio_err, "SSL/TLS Alert [%s] %s:%s\n", |
| (w & SSL_CB_READ ? "read" : "write"), |
| SSL_alert_type_string_long(r), |
| SSL_alert_desc_string_long(r)); |
| } else if (w & SSL_CB_LOOP) { |
| BIO_printf(bio_err, "SSL/TLS State [%s] %s\n", |
| (SSL_in_connect_init((SSL*)s) ? "connect" : "-"), |
| SSL_state_string_long(s)); |
| } else if (w & (SSL_CB_HANDSHAKE_START|SSL_CB_HANDSHAKE_DONE)) { |
| BIO_printf(bio_err, "SSL/TLS Handshake [%s] %s\n", |
| (w & SSL_CB_HANDSHAKE_START ? "Start" : "Done"), |
| SSL_state_string_long(s)); |
| } |
| } |
| |
| #if OPENSSL_VERSION_NUMBER < 0x10101000 |
| |
| #ifndef RAND_MAX |
| #define RAND_MAX INT_MAX |
| #endif |
| |
| static int ssl_rand_choosenum(int l, int h) |
| { |
| int i; |
| char buf[50]; |
| |
| apr_snprintf(buf, sizeof(buf), "%.0f", |
| (((double)(rand()%RAND_MAX)/RAND_MAX)*(h-l))); |
| i = atoi(buf)+1; |
| if (i < l) i = l; |
| if (i > h) i = h; |
| return i; |
| } |
| |
| static void ssl_rand_seed(void) |
| { |
| int n, l; |
| apr_time_t t; |
| pid_t pid; |
| unsigned char stackdata[256]; |
| |
| /* |
| * seed in the current time (usually just 4 bytes) |
| */ |
| t = lasttime; |
| l = sizeof(apr_time_t); |
| RAND_seed((unsigned char *)&t, l); |
| |
| /* |
| * seed in the current process id (usually just 4 bytes) |
| */ |
| pid = getpid(); |
| l = sizeof(pid_t); |
| RAND_seed((unsigned char *)&pid, l); |
| |
| /* |
| * seed in some current state of the run-time stack (128 bytes) |
| */ |
| n = ssl_rand_choosenum(0, sizeof(stackdata)-128-1); |
| RAND_seed(stackdata+n, 128); |
| } |
| #else |
| #define ssl_rand_seed() /* noop */ |
| #endif |
| |
| static int ssl_print_connection_info(BIO *bio, SSL *ssl) |
| { |
| AB_SSL_CIPHER_CONST SSL_CIPHER *c; |
| int alg_bits,bits; |
| |
| BIO_printf(bio,"Transport Protocol :%s\n", SSL_get_version(ssl)); |
| |
| c = SSL_get_current_cipher(ssl); |
| BIO_printf(bio,"Cipher Suite Protocol :%s\n", SSL_CIPHER_get_version(c)); |
| BIO_printf(bio,"Cipher Suite Name :%s\n",SSL_CIPHER_get_name(c)); |
| |
| bits = SSL_CIPHER_get_bits(c,&alg_bits); |
| BIO_printf(bio,"Cipher Suite Cipher Bits:%d (%d)\n",bits,alg_bits); |
| |
| return(1); |
| } |
| |
| static void ssl_print_cert_info(BIO *bio, X509 *cert) |
| { |
| X509_NAME *dn; |
| EVP_PKEY *pk; |
| char buf[1024]; |
| |
| BIO_printf(bio, "Certificate version: %ld\n", X509_get_version(cert)+1); |
| BIO_printf(bio,"Valid from: "); |
| ASN1_UTCTIME_print(bio, X509_get_notBefore(cert)); |
| BIO_printf(bio,"\n"); |
| |
| BIO_printf(bio,"Valid to : "); |
| ASN1_UTCTIME_print(bio, X509_get_notAfter(cert)); |
| BIO_printf(bio,"\n"); |
| |
| pk = X509_get_pubkey(cert); |
| BIO_printf(bio,"Public key is %d bits\n", |
| EVP_PKEY_bits(pk)); |
| EVP_PKEY_free(pk); |
| |
| dn = X509_get_issuer_name(cert); |
| X509_NAME_oneline(dn, buf, sizeof(buf)); |
| BIO_printf(bio,"The issuer name is %s\n", buf); |
| |
| dn=X509_get_subject_name(cert); |
| X509_NAME_oneline(dn, buf, sizeof(buf)); |
| BIO_printf(bio,"The subject name is %s\n", buf); |
| |
| /* dump the extension list too */ |
| BIO_printf(bio, "Extension Count: %d\n", X509_get_ext_count(cert)); |
| } |
| |
| static void ssl_print_info(struct connection *c) |
| { |
| X509_STACK_TYPE *sk; |
| X509 *cert; |
| int count; |
| |
| BIO_printf(bio_err, "\n"); |
| sk = SSL_get_peer_cert_chain(c->ssl); |
| if ((count = SK_NUM(sk)) > 0) { |
| int i; |
| for (i=1; i<count; i++) { |
| cert = (X509 *)SK_VALUE(sk, i); |
| ssl_print_cert_info(bio_out, cert); |
| } |
| } |
| cert = SSL_get_peer_certificate(c->ssl); |
| if (cert == NULL) { |
| BIO_printf(bio_out, "Anon DH\n"); |
| } else { |
| BIO_printf(bio_out, "Peer certificate\n"); |
| ssl_print_cert_info(bio_out, cert); |
| X509_free(cert); |
| } |
| ssl_print_connection_info(bio_err,c->ssl); |
| SSL_SESSION_print(bio_err, SSL_get_session(c->ssl)); |
| } |
| |
| static void ssl_proceed_handshake(struct connection *c) |
| { |
| struct worker *worker = c->worker; |
| int again; |
| |
| do { |
| int ret, ecode; |
| apr_status_t status; |
| |
| again = 0; /* until further notice */ |
| |
| ret = SSL_do_handshake(c->ssl); |
| ecode = SSL_get_error(c->ssl, ret); |
| switch (ecode) { |
| case SSL_ERROR_NONE: |
| if (verbosity >= 2) |
| ssl_print_info(c); |
| if (!worker->metrics.ssl_info[0]) { |
| AB_SSL_CIPHER_CONST SSL_CIPHER *ci; |
| X509 *cert; |
| int sk_bits, pk_bits, swork; |
| |
| ci = SSL_get_current_cipher(c->ssl); |
| sk_bits = SSL_CIPHER_get_bits(ci, &swork); |
| cert = SSL_get_peer_certificate(c->ssl); |
| if (cert) |
| pk_bits = EVP_PKEY_bits(X509_get_pubkey(cert)); |
| else |
| pk_bits = 0; /* Anon DH */ |
| |
| apr_snprintf(worker->metrics.ssl_info, sizeof(worker->metrics.ssl_info), |
| "%s,%s,%d,%d", |
| SSL_get_version(c->ssl), |
| SSL_CIPHER_get_name(ci), |
| pk_bits, sk_bits); |
| if (cert) X509_free(cert); |
| } |
| #if OPENSSL_VERSION_NUMBER >= 0x10002000L |
| if (!worker->metrics.ssl_tmp_key[0] && !worker->metrics.ssl_tmp_key[1]) { |
| EVP_PKEY *key; |
| if (SSL_get_server_tmp_key(c->ssl, &key)) { |
| switch (EVP_PKEY_id(key)) { |
| case EVP_PKEY_RSA: |
| apr_snprintf(worker->metrics.ssl_tmp_key, 128, "RSA %d bits", |
| EVP_PKEY_bits(key)); |
| break; |
| case EVP_PKEY_DH: |
| apr_snprintf(worker->metrics.ssl_tmp_key, 128, "DH %d bits", |
| EVP_PKEY_bits(key)); |
| break; |
| #ifndef OPENSSL_NO_EC |
| case EVP_PKEY_EC: { |
| #if OPENSSL_VERSION_NUMBER >= 0x30000000L |
| size_t len; |
| char cname[80]; |
| if (!EVP_PKEY_get_utf8_string_param(key, OSSL_PKEY_PARAM_GROUP_NAME, |
| cname, sizeof(cname), &len)) { |
| cname[0] = '?'; |
| len = 1; |
| } |
| cname[len] = '\0'; |
| #else |
| const char *cname = NULL; |
| EC_KEY *ec = EVP_PKEY_get1_EC_KEY(key); |
| int nid = EC_GROUP_get_curve_name(EC_KEY_get0_group(ec)); |
| EC_KEY_free(ec); |
| cname = EC_curve_nid2nist(nid); |
| if (!cname) { |
| cname = OBJ_nid2sn(nid); |
| if (!cname) |
| cname = "?"; |
| } |
| #endif |
| apr_snprintf(worker->metrics.ssl_tmp_key, 128, "ECDH %s %d bits", |
| cname, EVP_PKEY_bits(key)); |
| break; |
| } |
| #endif |
| default: |
| apr_snprintf(worker->metrics.ssl_tmp_key, 128, "%s %d bits", |
| OBJ_nid2sn(EVP_PKEY_id(key)), |
| EVP_PKEY_bits(key)); |
| break; |
| } |
| EVP_PKEY_free(key); |
| } |
| else { |
| /* not available, do not reenter here still */ |
| worker->metrics.ssl_tmp_key[1] = !0; |
| } |
| } |
| #endif |
| write_request(c); |
| break; |
| |
| case SSL_ERROR_WANT_READ: |
| set_conn_state(c, STATE_HANDSHAKE, APR_POLLIN); |
| break; |
| |
| case SSL_ERROR_WANT_WRITE: |
| set_conn_state(c, STATE_HANDSHAKE, APR_POLLOUT); |
| break; |
| |
| case SSL_ERROR_WANT_CONNECT: |
| case SSL_ERROR_SSL: |
| case SSL_ERROR_SYSCALL: |
| /* Unexpected result */ |
| status = apr_get_netos_error(); |
| BIO_printf(bio_err, "SSL handshake failed (%d): %s\n", ecode, |
| apr_psprintf(c->ctx, "%pm", &status)); |
| ERR_print_errors(bio_err); |
| abort_connection(c); |
| break; |
| |
| default: |
| again = 1; |
| break; |
| } |
| } while (again); |
| } |
| |
| #endif /* USE_SSL */ |
| |
| static void write_request(struct connection * c) |
| { |
| struct worker *worker = c->worker; |
| |
| do { |
| apr_time_t tnow; |
| apr_size_t l = c->rwrite; |
| apr_status_t e = APR_SUCCESS; /* prevent gcc warning */ |
| |
| tnow = lasttime = apr_time_now(); |
| |
| /* |
| * First time round ? |
| */ |
| if (c->rwrite == 0) { |
| /* zero connect time with keep-alive */ |
| if (c->keptalive) |
| c->start = tnow; |
| c->connect = tnow; |
| c->rwrote = 0; |
| c->rwrite = reqlen; |
| if (send_body) |
| c->rwrite += postlen; |
| l = c->rwrite; |
| } |
| else if (tnow > c->connect + aprtimeout) { |
| printf("Send request timed out!\n"); |
| abort_connection(c); |
| return; |
| } |
| |
| #ifdef USE_SSL |
| if (c->ssl) { |
| e = SSL_write(c->ssl, request + c->rwrote, l); |
| if (e <= 0) { |
| int scode = SSL_get_error(c->ssl, e); |
| switch (scode) { |
| case SSL_ERROR_WANT_READ: |
| set_conn_state(c, STATE_WRITE, APR_POLLIN); |
| break; |
| |
| case SSL_ERROR_WANT_WRITE: |
| set_conn_state(c, STATE_WRITE, APR_POLLOUT); |
| break; |
| |
| case SSL_ERROR_SYSCALL: |
| if (c->keptalive) { |
| /* connection aborted during keepalive: |
| * let the length check determine whether it's an error |
| */ |
| shutdown_connection(c); |
| break; |
| } |
| default: |
| /* some fatal error: */ |
| BIO_printf(bio_err, "SSL write failed (%d) - closing connection\n", scode); |
| ERR_print_errors(bio_err); |
| abort_connection(c); |
| break; |
| } |
| return; |
| } |
| l = e; |
| } |
| else |
| #endif |
| { |
| e = apr_socket_send(c->aprsock, request + c->rwrote, &l); |
| if (e != APR_SUCCESS && !l) { |
| if (APR_STATUS_IS_EAGAIN(e)) { |
| set_conn_state(c, STATE_WRITE, APR_POLLOUT); |
| return; |
| } |
| if (c->keptalive) { |
| /* connection aborted during keepalive: |
| * let the length check determine whether it's an error |
| */ |
| shutdown_connection(c); |
| } |
| else { |
| worker->metrics.epipe++; |
| printf("Send request failed!\n"); |
| abort_connection(c); |
| } |
| return; |
| } |
| } |
| worker->metrics.totalposted += l; |
| c->rwrote += l; |
| c->rwrite -= l; |
| } while (c->rwrite); |
| |
| c->endwrite = lasttime = apr_time_now(); |
| worker->started++; |
| |
| set_conn_state(c, STATE_READ, APR_POLLIN); |
| } |
| |
| /* --------------------------------------------------------- */ |
| |
| /* calculate and output results */ |
| |
| static int compradre(struct data * a, struct data * b) |
| { |
| if ((a->ctime) < (b->ctime)) |
| return -1; |
| if ((a->ctime) > (b->ctime)) |
| return +1; |
| return 0; |
| } |
| |
| static int comprando(struct data * a, struct data * b) |
| { |
| if ((a->time) < (b->time)) |
| return -1; |
| if ((a->time) > (b->time)) |
| return +1; |
| return 0; |
| } |
| |
| static int compri(struct data * a, struct data * b) |
| { |
| apr_interval_time_t p = a->time - a->ctime; |
| apr_interval_time_t q = b->time - b->ctime; |
| if (p < q) |
| return -1; |
| if (p > q) |
| return +1; |
| return 0; |
| } |
| |
| static int compwait(struct data * a, struct data * b) |
| { |
| if ((a->waittime) < (b->waittime)) |
| return -1; |
| if ((a->waittime) > (b->waittime)) |
| return 1; |
| return 0; |
| } |
| |
| static void consolidate_metrics(void) |
| { |
| int i, j; |
| |
| for (i = 0; i < num_workers; i++) { |
| struct worker *worker = &workers[i]; |
| |
| metrics.done += worker->metrics.done; |
| metrics.doneka += worker->metrics.doneka; |
| metrics.good += worker->metrics.good; |
| metrics.bad += worker->metrics.bad; |
| |
| metrics.epipe += worker->metrics.epipe; |
| metrics.err_length += worker->metrics.err_length; |
| metrics.err_conn += worker->metrics.err_conn; |
| metrics.err_recv += worker->metrics.err_recv; |
| metrics.err_except += worker->metrics.err_except; |
| metrics.err_response += worker->metrics.err_response; |
| metrics.aborted_ka += worker->metrics.aborted_ka; |
| |
| metrics.concurrent += worker->metrics.concurrent; |
| metrics.totalread += worker->metrics.totalread; |
| metrics.totalbread += worker->metrics.totalbread; |
| metrics.totalposted += worker->metrics.totalposted; |
| |
| if (metrics.doclen == 0) { |
| metrics.doclen = worker->metrics.doclen; |
| } |
| |
| #ifdef USE_SSL |
| if (is_ssl && !metrics.ssl_info[0] && worker->metrics.ssl_info[0]) { |
| apr_cpystrn(metrics.ssl_info, worker->metrics.ssl_info, |
| sizeof(metrics.ssl_info)); |
| } |
| if (is_ssl && !metrics.ssl_tmp_key[0] && worker->metrics.ssl_tmp_key[0]) { |
| apr_cpystrn(metrics.ssl_tmp_key, worker->metrics.ssl_tmp_key, |
| sizeof(metrics.ssl_tmp_key)); |
| } |
| #endif |
| |
| if (worker->metrics.done > worker->requests) { |
| /* Mean of the cumulative stats accross the window */ |
| int n = (worker->metrics.done + worker->requests - 1) / worker->requests; |
| int m = (worker->metrics.done % worker->requests); |
| for (j = 0; j < worker->requests; j++) { |
| struct data *s = &worker->stats[j]; |
| if (j == m) { |
| n--; |
| } |
| s->waittime /= n; |
| s->ctime /= n; |
| s->time /= n; |
| } |
| } |
| } |
| } |
| |
| static void output_results(void) |
| { |
| double timetaken; |
| |
| timetaken = (double) (lasttime - start) / APR_USEC_PER_SEC; |
| |
| printf("\n\n"); |
| printf("Server Software: %s\n", servername); |
| printf("Server Hostname: %s\n", hostname); |
| printf("Server Port: %hu\n", port); |
| #ifdef USE_SSL |
| if (is_ssl && metrics.ssl_info[0]) { |
| printf("SSL/TLS Protocol: %s\n", metrics.ssl_info); |
| } |
| #if OPENSSL_VERSION_NUMBER >= 0x10002000L |
| if (is_ssl && metrics.ssl_tmp_key[0]) { |
| printf("Server Temp Key: %s\n", metrics.ssl_tmp_key); |
| } |
| #endif |
| #ifdef HAVE_TLSEXT |
| if (is_ssl && tls_sni) { |
| printf("TLS Server Name: %s\n", tls_sni); |
| } |
| #endif |
| #endif |
| printf("\n"); |
| printf("Document Path: %s\n", path); |
| if (nolength) |
| printf("Document Length: Variable\n"); |
| else |
| printf("Document Length: %" APR_SIZE_T_FMT " bytes\n", metrics.doclen); |
| printf("\n"); |
| printf("Number of workers: %d\n", num_workers); |
| printf("Concurrency Level: %d\n", concurrency); |
| printf("Concurrency achieved: %d\n", metrics.concurrent); |
| printf("Rampup delay: %" APR_TIME_T_FMT " [ms]\n", apr_time_as_msec(ramp)); |
| printf("Time taken for tests: %.3f seconds\n", timetaken); |
| printf("Number of requests: %d%s\n", requests, rlimited ? "" : " (window)"); |
| printf("Complete requests: %" APR_INT64_T_FMT "\n", metrics.done); |
| printf("Failed requests: %" APR_INT64_T_FMT "\n", metrics.bad); |
| if (metrics.bad) |
| printf(" (Connect: %d, Receive: %d, Length: %d, Exceptions: %d)\n", |
| metrics.err_conn, metrics.err_recv, metrics.err_length, metrics.err_except); |
| if (metrics.epipe) |
| printf("Write errors: %d\n", metrics.epipe); |
| if (metrics.err_response) |
| printf("Non-2xx responses: %d\n", metrics.err_response); |
| if (keepalive) { |
| printf("Keep-Alive requests: %" APR_INT64_T_FMT "\n", metrics.doneka); |
| if (metrics.aborted_ka) { |
| printf("Keep-Alive aborts: %d\n", metrics.aborted_ka); |
| } |
| } |
| printf("Total transferred: %" APR_INT64_T_FMT " bytes\n", metrics.totalread); |
| if (send_body) |
| printf("Total body sent: %" APR_INT64_T_FMT "\n", metrics.totalposted); |
| printf("HTML transferred: %" APR_INT64_T_FMT " bytes\n", metrics.totalbread); |
| |
| /* avoid divide by zero */ |
| if (timetaken && metrics.done) { |
| printf("Requests per second: %.2f [#/sec] (mean)\n", |
| (double) metrics.done / timetaken); |
| printf("Time per request: %.3f [ms] (mean)\n", |
| (double) concurrency * timetaken * 1000 / metrics.done); |
| printf("Time per request: %.3f [ms] (mean, across all concurrent requests)\n", |
| (double) timetaken * 1000 / metrics.done); |
| printf("Transfer rate: %.2f [Kbytes/sec] received\n", |
| (double) metrics.totalread / 1024 / timetaken); |
| if (send_body) { |
| printf(" %.2f kb/s sent\n", |
| (double) metrics.totalposted / 1024 / timetaken); |
| printf(" %.2f kb/s total\n", |
| (double) (metrics.totalread + metrics.totalposted) / 1024 / timetaken); |
| } |
| } |
| |
| if (metrics.done > 0) { |
| /* work out connection times */ |
| apr_int64_t i, count = ap_min(metrics.done, requests); |
| apr_time_t totalcon = 0, total = 0, totald = 0, totalwait = 0; |
| apr_time_t meancon, meantot, meand, meanwait; |
| apr_interval_time_t mincon = AB_TIME_MAX, mintot = AB_TIME_MAX, |
| mind = AB_TIME_MAX, minwait = AB_TIME_MAX; |
| apr_interval_time_t maxcon = 0, maxtot = 0, maxd = 0, maxwait = 0; |
| apr_interval_time_t mediancon = 0, mediantot = 0, mediand = 0, medianwait = 0; |
| double sdtot = 0, sdcon = 0, sdd = 0, sdwait = 0; |
| |
| for (i = 0; i < count; i++) { |
| struct data *s = &stats[i]; |
| mincon = ap_min(mincon, s->ctime); |
| mintot = ap_min(mintot, s->time); |
| mind = ap_min(mind, s->time - s->ctime); |
| minwait = ap_min(minwait, s->waittime); |
| |
| maxcon = ap_max(maxcon, s->ctime); |
| maxtot = ap_max(maxtot, s->time); |
| maxd = ap_max(maxd, s->time - s->ctime); |
| maxwait = ap_max(maxwait, s->waittime); |
| |
| totalcon += s->ctime; |
| total += s->time; |
| totald += s->time - s->ctime; |
| totalwait += s->waittime; |
| } |
| meancon = totalcon / count; |
| meantot = total / count; |
| meand = totald / count; |
| meanwait = totalwait / count; |
| |
| /* calculating the sample variance: the sum of the squared deviations, divided by n-1 */ |
| for (i = 0; i < count; i++) { |
| struct data *s = &stats[i]; |
| double a; |
| a = ((double)s->time - meantot); |
| sdtot += a * a; |
| a = ((double)s->ctime - meancon); |
| sdcon += a * a; |
| a = ((double)s->time - (double)s->ctime - meand); |
| sdd += a * a; |
| a = ((double)s->waittime - meanwait); |
| sdwait += a * a; |
| } |
| |
| sdtot = (count > 1) ? sqrt(sdtot / (count - 1)) : 0; |
| sdcon = (count > 1) ? sqrt(sdcon / (count - 1)) : 0; |
| sdd = (count > 1) ? sqrt(sdd / (count - 1)) : 0; |
| sdwait = (count > 1) ? sqrt(sdwait / (count - 1)) : 0; |
| |
| /* |
| * XXX: what is better; this hideous cast of the compradre function; or |
| * the four warnings during compile ? dirkx just does not know and |
| * hates both/ |
| */ |
| qsort(stats, count, sizeof(struct data), |
| (int (*) (const void *, const void *)) compradre); |
| if ((count > 1) && (count % 2)) |
| mediancon = (stats[count / 2].ctime + stats[count / 2 + 1].ctime) / 2; |
| else |
| mediancon = stats[count / 2].ctime; |
| |
| qsort(stats, count, sizeof(struct data), |
| (int (*) (const void *, const void *)) compri); |
| if ((count > 1) && (count % 2)) |
| mediand = (stats[count / 2].time + stats[count / 2 + 1].time \ |
| -stats[count / 2].ctime - stats[count / 2 + 1].ctime) / 2; |
| else |
| mediand = stats[count / 2].time - stats[count / 2].ctime; |
| |
| qsort(stats, count, sizeof(struct data), |
| (int (*) (const void *, const void *)) compwait); |
| if ((count > 1) && (count % 2)) |
| medianwait = (stats[count / 2].waittime + stats[count / 2 + 1].waittime) / 2; |
| else |
| medianwait = stats[count / 2].waittime; |
| |
| qsort(stats, count, sizeof(struct data), |
| (int (*) (const void *, const void *)) comprando); |
| if ((count > 1) && (count % 2)) |
| mediantot = (stats[count / 2].time + stats[count / 2 + 1].time) / 2; |
| else |
| mediantot = stats[count / 2].time; |
| |
| printf("\nConnection Times (ms)\n"); |
| /* |
| * Reduce stats from apr time to milliseconds |
| */ |
| mincon = ap_round_ms(mincon); |
| mind = ap_round_ms(mind); |
| minwait = ap_round_ms(minwait); |
| mintot = ap_round_ms(mintot); |
| meancon = ap_round_ms(meancon); |
| meand = ap_round_ms(meand); |
| meanwait = ap_round_ms(meanwait); |
| meantot = ap_round_ms(meantot); |
| mediancon = ap_round_ms(mediancon); |
| mediand = ap_round_ms(mediand); |
| medianwait = ap_round_ms(medianwait); |
| mediantot = ap_round_ms(mediantot); |
| maxcon = ap_round_ms(maxcon); |
| maxd = ap_round_ms(maxd); |
| maxwait = ap_round_ms(maxwait); |
| maxtot = ap_round_ms(maxtot); |
| sdcon = ap_double_ms(sdcon); |
| sdd = ap_double_ms(sdd); |
| sdwait = ap_double_ms(sdwait); |
| sdtot = ap_double_ms(sdtot); |
| |
| if (confidence) { |
| #define CONF_FMT_STRING "%5" APR_TIME_T_FMT " %4" APR_TIME_T_FMT " %5.1f %6" APR_TIME_T_FMT " %7" APR_TIME_T_FMT "\n" |
| printf(" min mean[+/-sd] median max\n"); |
| printf("Connect: " CONF_FMT_STRING, |
| mincon, meancon, sdcon, mediancon, maxcon); |
| printf("Processing: " CONF_FMT_STRING, |
| mind, meand, sdd, mediand, maxd); |
| printf("Waiting: " CONF_FMT_STRING, |
| minwait, meanwait, sdwait, medianwait, maxwait); |
| printf("Total: " CONF_FMT_STRING, |
| mintot, meantot, sdtot, mediantot, maxtot); |
| #undef CONF_FMT_STRING |
| |
| #define SANE(what,mean,median,sd) \ |
| { \ |
| double d = (double)mean - median; \ |
| if (d < 0) d = -d; \ |
| if (d > 2 * sd ) \ |
| printf("ERROR: The median and mean for " what " are more than twice the standard\n" \ |
| " deviation apart. These results are NOT reliable.\n"); \ |
| else if (d > sd ) \ |
| printf("WARNING: The median and mean for " what " are not within a normal deviation\n" \ |
| " These results are probably not that reliable.\n"); \ |
| } |
| SANE("the initial connection time", meancon, mediancon, sdcon); |
| SANE("the processing time", meand, mediand, sdd); |
| SANE("the waiting time", meanwait, medianwait, sdwait); |
| SANE("the total time", meantot, mediantot, sdtot); |
| } |
| else { |
| printf(" min avg max\n"); |
| #define CONF_FMT_STRING "%5" APR_TIME_T_FMT " %5" APR_TIME_T_FMT "%5" APR_TIME_T_FMT "\n" |
| printf("Connect: " CONF_FMT_STRING, mincon, meancon, maxcon); |
| printf("Processing: " CONF_FMT_STRING, mind, meand, maxd); |
| printf("Waiting: " CONF_FMT_STRING, minwait, meanwait, maxwait); |
| printf("Total: " CONF_FMT_STRING, mintot, meantot, maxtot); |
| #undef CONF_FMT_STRING |
| } |
| |
| |
| /* Sorted on total connect times */ |
| if (percentile && (count > 1)) { |
| printf("\nPercentage of the requests served within a certain time (ms)\n"); |
| for (i = 0; i < sizeof(percs) / sizeof(int); i++) { |
| if (percs[i] <= 0) |
| printf(" 0%% <0> (never)\n"); |
| else if (percs[i] >= 100) |
| printf(" 100%% %5" APR_TIME_T_FMT " (longest request)\n", |
| ap_round_ms(stats[count - 1].time)); |
| else |
| printf(" %d%% %5" APR_TIME_T_FMT "\n", percs[i], |
| ap_round_ms(stats[(unsigned long)count * percs[i] / 100].time)); |
| } |
| } |
| if (csvperc) { |
| FILE *out = fopen(csvperc, "w"); |
| if (!out) { |
| perror("Cannot open CSV output file"); |
| exit(1); |
| } |
| fprintf(out, "" "Percentage served" "," "Time in ms" "\n"); |
| for (i = 0; i <= 100; i++) { |
| double t; |
| if (i == 0) |
| t = ap_double_ms(stats[0].time); |
| else if (i == 100) |
| t = ap_double_ms(stats[count - 1].time); |
| else |
| t = ap_double_ms(stats[(unsigned long) (0.5 + (double)count * i / 100.0)].time); |
| fprintf(out, "%" APR_INT64_T_FMT ",%.3f\n", i, t); |
| } |
| fclose(out); |
| } |
| if (gnuplot) { |
| char tmstring[APR_CTIME_LEN]; |
| FILE *out = fopen(gnuplot, "w"); |
| if (!out) { |
| perror("Cannot open gnuplot output file"); |
| exit(1); |
| } |
| fprintf(out, "starttime\tseconds\tctime\tdtime\tttime\twait\n"); |
| for (i = 0; i < count; i++) { |
| (void) apr_ctime(tmstring, stats[i].starttime); |
| fprintf(out, "%s\t%" APR_TIME_T_FMT "\t%" APR_TIME_T_FMT |
| "\t%" APR_TIME_T_FMT "\t%" APR_TIME_T_FMT |
| "\t%" APR_TIME_T_FMT "\n", tmstring, |
| apr_time_sec(stats[i].starttime), |
| ap_round_ms(stats[i].ctime), |
| ap_round_ms(stats[i].time - stats[i].ctime), |
| ap_round_ms(stats[i].time), |
| ap_round_ms(stats[i].waittime)); |
| } |
| fclose(out); |
| } |
| } |
| fflush(stdout); |
| } |
| |
| /* --------------------------------------------------------- */ |
| |
| /* calculate and output results in HTML */ |
| |
| static void output_html_results(void) |
| { |
| double timetaken = (double) (lasttime - start) / APR_USEC_PER_SEC; |
| |
| printf("\n\n<table %s>\n", tablestring); |
| printf("<tr %s><th colspan=2 %s>Server Software:</th>" |
| "<td colspan=2 %s>%s</td></tr>\n", |
| trstring, tdstring, tdstring, servername); |
| printf("<tr %s><th colspan=2 %s>Server Hostname:</th>" |
| "<td colspan=2 %s>%s</td></tr>\n", |
| trstring, tdstring, tdstring, hostname); |
| printf("<tr %s><th colspan=2 %s>Server Port:</th>" |
| "<td colspan=2 %s>%hu</td></tr>\n", |
| trstring, tdstring, tdstring, port); |
| printf("<tr %s><th colspan=2 %s>Document Path:</th>" |
| "<td colspan=2 %s>%s</td></tr>\n", |
| trstring, tdstring, tdstring, path); |
| if (nolength) |
| printf("<tr %s><th colspan=2 %s>Document Length:</th>" |
| "<td colspan=2 %s>Variable</td></tr>\n", |
| trstring, tdstring, tdstring); |
| else |
| printf("<tr %s><th colspan=2 %s>Document Length:</th>" |
| "<td colspan=2 %s>%" APR_SIZE_T_FMT " bytes</td></tr>\n", |
| trstring, tdstring, tdstring, metrics.doclen); |
| printf("<tr %s><th colspan=2 %s>Number of workers:</th>" |
| "<td colspan=2 %s>%d</td></tr>\n", |
| trstring, tdstring, tdstring, num_workers); |
| printf("<tr %s><th colspan=2 %s>Concurrency Level:</th>" |
| "<td colspan=2 %s>%d</td></tr>\n", |
| trstring, tdstring, tdstring, concurrency); |
| printf("<tr %s><th colspan=2 %s>Concurrency achieved:</th>" |
| "<td colspan=2 %s>%d</td></tr>\n", |
| trstring, tdstring, tdstring, metrics.concurrent); |
| printf("<tr %s><th colspan=2 %s>Rampup delay:</th>" |
| "<td colspan=2 %s>%" APR_TIME_T_FMT " [ms]</td></tr>\n", |
| trstring, tdstring, tdstring, apr_time_as_msec(ramp)); |
| printf("<tr %s><th colspan=2 %s>Time taken for tests:</th>" |
| "<td colspan=2 %s>%.3f seconds</td></tr>\n", |
| trstring, tdstring, tdstring, timetaken); |
| printf("<tr %s><th colspan=2 %s>Complete requests:</th>" |
| "<td colspan=2 %s>%" APR_INT64_T_FMT "</td></tr>\n", |
| trstring, tdstring, tdstring, metrics.done); |
| printf("<tr %s><th colspan=2 %s>Failed requests:</th>" |
| "<td colspan=2 %s>%" APR_INT64_T_FMT "</td></tr>\n", |
| trstring, tdstring, tdstring, metrics.bad); |
| if (metrics.bad) |
| printf("<tr %s><td colspan=4 %s > (Connect: %d, Length: %d, Exceptions: %d)</td></tr>\n", |
| trstring, tdstring, metrics.err_conn, metrics.err_length, metrics.err_except); |
| if (metrics.err_response) |
| printf("<tr %s><th colspan=2 %s>Non-2xx responses:</th>" |
| "<td colspan=2 %s>%d</td></tr>\n", |
| trstring, tdstring, tdstring, metrics.err_response); |
| if (keepalive) |
| printf("<tr %s><th colspan=2 %s>Keep-Alive requests:</th>" |
| "<td colspan=2 %s>%" APR_INT64_T_FMT "</td></tr>\n", |
| trstring, tdstring, tdstring, metrics.doneka); |
| printf("<tr %s><th colspan=2 %s>Total transferred:</th>" |
| "<td colspan=2 %s>%" APR_INT64_T_FMT " bytes</td></tr>\n", |
| trstring, tdstring, tdstring, metrics.totalread); |
| if (send_body) |
| printf("<tr %s><th colspan=2 %s>Total body sent:</th>" |
| "<td colspan=2 %s>%" APR_INT64_T_FMT "</td></tr>\n", |
| trstring, tdstring, tdstring, metrics.totalposted); |
| printf("<tr %s><th colspan=2 %s>HTML transferred:</th>" |
| "<td colspan=2 %s>%" APR_INT64_T_FMT " bytes</td></tr>\n", |
| trstring, tdstring, tdstring, metrics.totalbread); |
| |
| /* avoid divide by zero */ |
| if (timetaken) { |
| printf("<tr %s><th colspan=2 %s>Requests per second:</th>" |
| "<td colspan=2 %s>%.2f</td></tr>\n", |
| trstring, tdstring, tdstring, (double) metrics.done / timetaken); |
| printf("<tr %s><th colspan=2 %s>Transfer rate:</th>" |
| "<td colspan=2 %s>%.2f kb/s received</td></tr>\n", |
| trstring, tdstring, tdstring, (double) metrics.totalread / 1024 / timetaken); |
| if (send_body) { |
| printf("<tr %s><td colspan=2 %s> </td>" |
| "<td colspan=2 %s>%.2f kb/s sent</td></tr>\n", |
| trstring, tdstring, tdstring, |
| (double) metrics.totalposted / 1024 / timetaken); |
| printf("<tr %s><td colspan=2 %s> </td>" |
| "<td colspan=2 %s>%.2f kb/s total</td></tr>\n", |
| trstring, tdstring, tdstring, |
| (double) (metrics.totalread + metrics.totalposted) / 1024 / timetaken); |
| } |
| } |
| { |
| /* work out connection times */ |
| apr_int64_t i, count = ap_min(metrics.done, requests); |
| apr_interval_time_t totalcon = 0, total = 0; |
| apr_interval_time_t mincon = AB_TIME_MAX, mintot = AB_TIME_MAX; |
| apr_interval_time_t maxcon = 0, maxtot = 0; |
| |
| for (i = 0; i < count; i++) { |
| struct data *s = &stats[i]; |
| mincon = ap_min(mincon, s->ctime); |
| mintot = ap_min(mintot, s->time); |
| maxcon = ap_max(maxcon, s->ctime); |
| maxtot = ap_max(maxtot, s->time); |
| totalcon += s->ctime; |
| total += s->time; |
| } |
| /* |
| * Reduce stats from apr time to milliseconds |
| */ |
| mincon = ap_round_ms(mincon); |
| mintot = ap_round_ms(mintot); |
| maxcon = ap_round_ms(maxcon); |
| maxtot = ap_round_ms(maxtot); |
| totalcon = ap_round_ms(totalcon); |
| total = ap_round_ms(total); |
| |
| if (count > 0) { /* avoid division by zero (if 0 count) */ |
| printf("<tr %s><th %s colspan=4>Connection Times (ms)</th></tr>\n", |
| trstring, tdstring); |
| printf("<tr %s><th %s> </th> <th %s>min</th> <th %s>avg</th> <th %s>max</th></tr>\n", |
| trstring, tdstring, tdstring, tdstring, tdstring); |
| printf("<tr %s><th %s>Connect:</th>" |
| "<td %s>%5" APR_TIME_T_FMT "</td>" |
| "<td %s>%5" APR_TIME_T_FMT "</td>" |
| "<td %s>%5" APR_TIME_T_FMT "</td></tr>\n", |
| trstring, tdstring, tdstring, mincon, tdstring, totalcon / count, tdstring, maxcon); |
| printf("<tr %s><th %s>Processing:</th>" |
| "<td %s>%5" APR_TIME_T_FMT "</td>" |
| "<td %s>%5" APR_TIME_T_FMT "</td>" |
| "<td %s>%5" APR_TIME_T_FMT "</td></tr>\n", |
| trstring, tdstring, tdstring, mintot - mincon, tdstring, |
| (total / count) - (totalcon / count), tdstring, maxtot - maxcon); |
| printf("<tr %s><th %s>Total:</th>" |
| "<td %s>%5" APR_TIME_T_FMT "</td>" |
| "<td %s>%5" APR_TIME_T_FMT "</td>" |
| "<td %s>%5" APR_TIME_T_FMT "</td></tr>\n", |
| trstring, tdstring, tdstring, mintot, tdstring, total / count, tdstring, maxtot); |
| } |
| printf("</table>\n"); |
| } |
| fflush(stdout); |
| } |
| |
| /* --------------------------------------------------------- */ |
| |
| /* start asnchronous non-blocking connection */ |
| |
| static void start_connection(struct connection * c) |
| { |
| struct worker *worker = c->worker; |
| apr_status_t rv; |
| apr_sockaddr_t *from; |
| |
| if (!worker_can_connect(worker)) { |
| return; |
| } |
| |
| assert(c->state == STATE_DISCONNECTED); |
| if (!c->ctx) { |
| apr_pool_create(&c->ctx, worker->pool); |
| APR_RING_ELEM_INIT(c, delay_list); |
| worker->counters[STATE_DISCONNECTED][0]++; |
| worker->metrics.concurrent++; |
| } |
| |
| if ((rv = apr_socket_create(&c->aprsock, worker->destsa->family, |
| SOCK_STREAM, 0, c->ctx)) != APR_SUCCESS) { |
| graceful_strerror("socket", rv); |
| return; |
| } |
| |
| c->pollfd.desc.s = c->aprsock; |
| c->pollfd.desc_type = APR_POLL_SOCKET; |
| c->pollfd.reqevents = c->pollfd.rtnevents = 0; |
| c->pollfd.client_data = c; |
| |
| if (bind_count) { |
| if (worker->bind_rr >= bind_count) { |
| worker->bind_rr = 0; |
| } |
| if ((rv = apr_socket_bind(c->aprsock, bind_addrs[worker->bind_rr++]))) { |
| graceful_strerror("bind", rv); |
| close_connection(c); |
| return; |
| } |
| } |
| |
| apr_socket_timeout_set(c->aprsock, 0); |
| if ((rv = apr_socket_opt_set(c->aprsock, APR_SO_NONBLOCK, 1))) { |
| graceful_strerror("socket nonblock", rv); |
| close_connection(c); |
| return; |
| } |
| |
| if ((rv = apr_socket_opt_set(c->aprsock, APR_TCP_NODELAY, 1))) { |
| graceful_strerror("socket nodelay", rv); |
| close_connection(c); |
| return; |
| } |
| |
| if (windowsize != 0) { |
| rv = apr_socket_opt_set(c->aprsock, APR_SO_SNDBUF, |
| windowsize); |
| if (rv != APR_SUCCESS && rv != APR_ENOTIMPL) { |
| graceful_strerror("socket send buffer", rv); |
| close_connection(c); |
| return; |
| } |
| rv = apr_socket_opt_set(c->aprsock, APR_SO_RCVBUF, |
| windowsize); |
| if (rv != APR_SUCCESS && rv != APR_ENOTIMPL) { |
| graceful_strerror("socket receive buffer", rv); |
| close_connection(c); |
| return; |
| } |
| } |
| |
| if (src_address) { |
| if ((rv = apr_sockaddr_info_get(&from, src_address, destsa->family, |
| 0, 0, c->ctx)) != APR_SUCCESS) |
| graceful_strerror("src_address get", rv); |
| if ((rv = apr_socket_bind(c->aprsock, from)) != APR_SUCCESS) |
| graceful_strerror("src_address bind", rv); |
| } |
| |
| c->read = 0; |
| c->bread = 0; |
| c->length = 0; |
| c->keepalive = 0; |
| c->cbx = 0; |
| c->gotheader = 0; |
| c->rwrite = 0; |
| c->keptalive = 0; |
| c->start = lasttime = apr_time_now(); |
| |
| #ifdef USE_SSL |
| if (is_ssl) { |
| BIO *bio; |
| apr_os_sock_t fd; |
| |
| ssl_rand_seed(); |
| apr_os_sock_get(&fd, c->aprsock); |
| |
| if ((c->ssl = SSL_new(ssl_ctx)) == NULL) { |
| graceful_error("SSL_new failed"); |
| ERR_print_errors(bio_err); |
| close_connection(c); |
| return; |
| } |
| if((bio = BIO_new_socket(fd, BIO_NOCLOSE)) == NULL) { |
| graceful_error("BIO_new_socket failed"); |
| ERR_print_errors(bio_err); |
| close_connection(c); |
| return; |
| } |
| BIO_set_nbio(bio, 1); |
| SSL_set_bio(c->ssl, bio, bio); |
| SSL_set_connect_state(c->ssl); |
| if (verbosity >= 4) { |
| #if OPENSSL_VERSION_NUMBER >= 0x30000000L |
| BIO_set_callback_ex(bio, ssl_print_cb); |
| #else |
| BIO_set_callback(bio, ssl_print_cb); |
| #endif |
| BIO_set_callback_arg(bio, (void *)bio_err); |
| } |
| #ifdef HAVE_TLSEXT |
| if (tls_sni) { |
| SSL_set_tlsext_host_name(c->ssl, tls_sni); |
| } |
| #endif |
| } else { |
| c->ssl = NULL; |
| } |
| #endif |
| if ((rv = apr_socket_connect(c->aprsock, worker->destsa))) { |
| if (APR_STATUS_IS_EINPROGRESS(rv)) { |
| set_conn_state(c, STATE_CONNECTING, APR_POLLOUT); |
| } |
| else { |
| try_reconnect(c, rv); |
| } |
| return; |
| } |
| |
| /* connected first time */ |
| #ifdef USE_SSL |
| if (c->ssl) { |
| set_conn_state(c, STATE_HANDSHAKE, 0); |
| ssl_proceed_handshake(c); |
| } |
| else |
| #endif |
| { |
| set_conn_state(c, STATE_WRITE, 0); |
| write_request(c); |
| } |
| } |
| |
| /* --------------------------------------------------------- */ |
| |
| /* close the transport layer */ |
| |
| static void close_connection(struct connection *c) |
| { |
| set_conn_state(c, STATE_DISCONNECTED, 0); |
| #ifdef USE_SSL |
| if (c->ssl) { |
| SSL_shutdown(c->ssl); |
| SSL_free(c->ssl); |
| c->ssl = NULL; |
| } |
| #endif |
| apr_pool_clear(c->ctx); |
| c->aprsock = NULL; |
| } |
| |
| /* --------------------------------------------------------- */ |
| |
| /* retry a connect()ion failure on the next address (if any) */ |
| |
| static void try_reconnect(struct connection *c, apr_status_t status) |
| { |
| struct worker *worker = c->worker; |
| |
| if (worker->metrics.good == 0 && worker->destsa->next) { |
| worker->destsa = worker->destsa->next; |
| close_connection(c); |
| start_connection(c); |
| } |
| else { |
| worker->metrics.err_conn++; |
| if (worker->metrics.good == 0) { |
| if (worker->metrics.err_conn > 10) { |
| fprintf(stderr, |
| "\nTest aborted after 10 failures\n\n"); |
| graceful_strerror("apr_socket_connect()", status); |
| } |
| worker->destsa = destsa; |
| } |
| abort_connection(c); |
| } |
| } |
| |
| /* --------------------------------------------------------- */ |
| |
| /* shutdown or reuse the connection, saving stats */ |
| |
| static void finalize_connection(struct connection *c, int reuse) |
| { |
| struct worker *worker = c->worker; |
| int good = (c->gotheader && c->bread >= c->length); |
| int final_state = c->state; |
| |
| /* close before measuring, to account for shutdown time */ |
| if (!reuse || !good) { |
| close_connection(c); |
| reuse = 0; |
| } |
| |
| if (c->read == 0 && c->keptalive) { |
| /* |
| * server has legitimately shut down an idle keep alive connection |
| * as per RFC7230 6.3.1, revert previous accounting (not an error). |
| */ |
| worker->metrics.doneka--; |
| worker->metrics.aborted_ka++; |
| if (final_state > STATE_WRITE) { |
| worker->started--; |
| } |
| } |
| else { |
| /* save out time */ |
| if (tlimit || worker->metrics.done < worker->requests) { |
| apr_time_t tnow = lasttime = c->end = apr_time_now(); |
| struct data *s = &worker->stats[worker->metrics.done % worker->requests]; |
| |
| /* Cumulative for when worker->metrics.done > worker->requests (tlimit), |
| * consolidate_metrics() will do the mean. |
| */ |
| s->starttime = c->start; /* use last.. */ |
| s->time += ap_max(0, c->end - c->start); |
| s->ctime += ap_max(0, c->connect - c->start); |
| s->waittime += ap_max(0, c->beginread - c->endwrite); |
| |
| if (heartbeatres) { |
| static apr_int64_t reqs_count64; |
| static apr_uint32_t reqs_count32; |
| int sync = 0, flush = 0; |
| apr_uint32_t n; |
| |
| #if APR_HAS_THREADS |
| /* use 32bit atomics only to help 32bit systems and support |
| * earlier APR versions (which lack 64bit atomics). |
| */ |
| if (num_workers > 1) |
| n = apr_atomic_inc32(&reqs_count32) + 1; |
| else |
| #endif |
| n = ++reqs_count32; |
| |
| if (!tlimit && !(n % heartbeatres)) { |
| sync = 1; |
| } |
| else if (tlimit && tnow >= logtime) { |
| sync = (logtime != 0); |
| logtime = tnow + hbperiod; |
| } |
| |
| if (sync) { |
| #if APR_HAS_THREADS |
| if (num_workers > 1) { |
| apr_uint32_t m = apr_atomic_xchg32(&reqs_count32, 0); |
| if (m) { |
| /* races should be rare here now */ |
| apr_thread_mutex_lock(workers_mutex); |
| reqs_count64 += m; |
| apr_thread_mutex_unlock(workers_mutex); |
| flush = (m >= n); |
| } |
| } |
| else |
| #endif |
| { |
| reqs_count64 += reqs_count32; |
| reqs_count32 = 0; |
| flush = 1; |
| } |
| } |
| if (flush) { |
| fprintf(stderr, |
| "Completed %" APR_INT64_T_FMT " requests\n", |
| reqs_count64); |
| fflush(stderr); |
| } |
| } |
| } |
| worker->metrics.done++; |
| |
| /* update worker's metrics */ |
| if (good) { |
| if (worker->metrics.good == 0) { |
| /* first time saves the doclen */ |
| worker->metrics.doclen = c->bread; |
| } |
| worker->metrics.good++; |
| } |
| else { |
| if (c->state >= STATE_READ |
| && !nolength && c->bread != worker->metrics.doclen) { |
| worker->metrics.err_length++; |
| } |
| worker->metrics.bad++; |
| } |
| } |
| |
| if (!reuse) { |
| start_connection(c); /* nop if !worker_can_connect() */ |
| } |
| else if (worker_can_connect(worker)) { |
| c->keptalive++; |
| worker->metrics.doneka++; |
| |
| c->read = 0; |
| c->bread = 0; |
| c->length = 0; |
| c->keepalive = 0; |
| c->cbx = 0; |
| c->gotheader = 0; |
| c->rwrite = 0; |
| |
| write_request(c); |
| } |
| else { |
| close_connection(c); |
| } |
| } |
| |
| /* --------------------------------------------------------- */ |
| |
| /* read data from connection */ |
| |
| static void read_response(struct connection * c) |
| { |
| struct worker *worker = c->worker; |
| apr_size_t r; |
| apr_status_t status; |
| char *part; |
| char respcode[4]; /* 3 digits and null */ |
| |
| read_more: |
| r = sizeof(worker->buffer); |
| if (c->length && r > c->length - c->bread) { |
| r = c->length - c->bread; |
| } |
| #ifdef USE_SSL |
| if (c->ssl) { |
| status = SSL_read(c->ssl, worker->buffer, r); |
| if (status <= 0) { |
| int scode = SSL_get_error(c->ssl, status); |
| switch (scode) { |
| case SSL_ERROR_WANT_READ: |
| set_conn_state(c, STATE_READ, APR_POLLIN); |
| break; |
| |
| case SSL_ERROR_WANT_WRITE: |
| set_conn_state(c, STATE_READ, APR_POLLOUT); |
| break; |
| |
| case SSL_ERROR_SYSCALL: |
| if (status == 0 && c->keptalive) { |
| case SSL_ERROR_ZERO_RETURN: |
| /* connection closed cleanly or aborted during keepalive: |
| * let the length check determine whether it's an error |
| */ |
| shutdown_connection(c); |
| break; |
| } |
| default: |
| /* some fatal error: */ |
| BIO_printf(bio_err, "SSL read failed (%d) - closing connection\n", scode); |
| ERR_print_errors(bio_err); |
| abort_connection(c); |
| break; |
| } |
| return; |
| } |
| r = status; |
| } |
| else |
| #endif |
| { |
| status = apr_socket_recv(c->aprsock, worker->buffer, &r); |
| if (APR_STATUS_IS_EAGAIN(status)) { |
| set_conn_state(c, STATE_READ, APR_POLLIN); |
| return; |
| } |
| if (status != APR_SUCCESS && !r) { |
| if (APR_STATUS_IS_EOF(status) || c->keptalive) { |
| /* connection closed cleanly or aborted during keepalive: |
| * let the length check determine whether it's an error |
| */ |
| shutdown_connection(c); |
| } |
| else { |
| worker->metrics.err_recv++; |
| if (recverrok) { |
| if (verbosity >= 1) { |
| char buf[120]; |
| fprintf(stderr,"%s: %s (%d)\n", "apr_socket_recv", |
| apr_strerror(status, buf, sizeof buf), status); |
| } |
| } |
| else { |
| graceful_strerror("apr_socket_recv", status); |
| } |
| abort_connection(c); |
| } |
| return; |
| } |
| } |
| |
| worker->metrics.totalread += r; |
| if (c->read == 0) { |
| c->beginread = apr_time_now(); |
| } |
| c->read += r; |
| |
| if (!c->gotheader) { |
| char *s; |
| int l = 4; |
| apr_size_t space = CBUFFSIZE - c->cbx - 1; /* -1 allows for \0 term */ |
| int tocopy = (space < r) ? space : r; |
| #ifdef NOT_ASCII |
| apr_size_t inbytes_left = space, outbytes_left = space; |
| |
| status = apr_xlate_conv_buffer(from_ascii, worker->buffer, &inbytes_left, |
| c->cbuff + c->cbx, &outbytes_left); |
| if (status || inbytes_left || outbytes_left) { |
| fprintf(stderr, "only simple translation is supported (%d/%" APR_SIZE_T_FMT |
| "/%" APR_SIZE_T_FMT ")\n", status, inbytes_left, outbytes_left); |
| exit(1); |
| } |
| #else |
| memcpy(c->cbuff + c->cbx, worker->buffer, space); |
| #endif /* NOT_ASCII */ |
| c->cbx += tocopy; |
| space -= tocopy; |
| c->cbuff[c->cbx] = 0; /* terminate for benefit of strstr */ |
| if (verbosity >= 2) { |
| printf("LOG: header received:\n%s\n", c->cbuff); |
| } |
| s = strstr(c->cbuff, "\r\n\r\n"); |
| /* |
| * this next line is so that we talk to NCSA 1.5 which blatantly |
| * breaks the http specifaction |
| */ |
| if (!s) { |
| s = strstr(c->cbuff, "\n\n"); |
| l = 2; |
| } |
| |
| if (!s) { |
| /* read rest next time */ |
| if (space) { |
| set_conn_state(c, STATE_READ, APR_POLLIN); |
| } |
| else { |
| /* header is in invalid or too big - close connection */ |
| if (++worker->metrics.err_response > 10) { |
| fprintf(stderr, |
| "\nTest aborted after 10 failures\n\n"); |
| graceful_error("Response header too long\n"); |
| } |
| abort_connection(c); |
| } |
| return; |
| } |
| { |
| /* have full header */ |
| s[l / 2] = '\0'; /* terminate at end of header */ |
| c->gotheader = 1; |
| |
| /* account for the body we may have read already */ |
| c->bread += c->cbx - (s + l - c->cbuff) + r - tocopy; |
| worker->metrics.totalbread += c->bread; |
| |
| /* |
| * XXX: this parsing isn't even remotely HTTP compliant... but in |
| * the interest of speed it doesn't totally have to be, it just |
| * needs to be extended to handle whatever servers folks want to |
| * test against. -djg |
| */ |
| |
| /* check response code */ |
| part = strstr(c->cbuff, "HTTP"); /* really HTTP/1.x_ */ |
| if (part && strlen(part) > strlen("HTTP/1.x_")) { |
| strncpy(respcode, (part + strlen("HTTP/1.x_")), 3); |
| respcode[3] = '\0'; |
| } |
| else { |
| strcpy(respcode, "500"); |
| } |
| |
| if (respcode[0] != '2') { |
| worker->metrics.err_response++; |
| if (verbosity >= 2) |
| printf("WARNING: Response code not 2xx (%s)\n", respcode); |
| } |
| else if (verbosity >= 3) { |
| printf("LOG: Response code = %s\n", respcode); |
| } |
| |
| c->keepalive = (keepalive && xstrcasestr(c->cbuff, "Keep-Alive")); |
| if (c->keepalive) { |
| const char *cl = xstrcasestr(c->cbuff, "Content-Length:"); |
| if (cl && method != HEAD) { |
| /* response to HEAD doesn't have entity body */ |
| c->length = atoi(cl + 16); |
| } |
| else { |
| c->length = 0; |
| } |
| } |
| |
| /* We have received the header, so we know this destination socket |
| * address is working, so schedule all remaining connections. */ |
| if (!worker->succeeded_once) { |
| int i; |
| apr_time_t now = apr_time_now(); |
| for (i = 1; i < worker->concurrency; i++) { |
| worker->conns[i].delay = now + (i * ramp); |
| APR_RING_INSERT_TAIL(&worker->delayed_ring, &worker->conns[i], |
| connection, delay_list); |
| } |
| worker->succeeded_once = 1; |
| |
| /* |
| * first time, extract some interesting info |
| */ |
| if (worker->slot == 0) { |
| char *p, *q; |
| size_t len = 0; |
| p = xstrcasestr(c->cbuff, "Server:"); |
| q = servername; |
| if (p) { |
| p += 8; |
| /* -1 to not overwrite last '\0' byte */ |
| while (*p > 32 && len++ < sizeof(servername) - 1) |
| *q++ = *p++; |
| } |
| *q = 0; |
| } |
| |
| #if APR_HAS_THREADS |
| if (num_workers > 1 && worker->slot == 0) { |
| apr_status_t rv; |
| apr_thread_mutex_lock(workers_mutex); |
| rv = apr_thread_cond_signal(workers_can_start); |
| if (rv != APR_SUCCESS) { |
| graceful_strerror("apr_thread_cond_wait()", rv); |
| close_connection(c); |
| return; |
| } |
| workers_can_start = NULL; /* one shot */ |
| apr_thread_mutex_unlock(workers_mutex); |
| } |
| #endif |
| } |
| } |
| } |
| else { |
| /* outside header, everything we have read is entity body */ |
| c->bread += r; |
| worker->metrics.totalbread += r; |
| } |
| |
| /* read incomplete or connection terminated by close, continue |
| * reading until we get everything or EOF/EAGAIN. |
| */ |
| if (c->bread < c->length || (!c->length && method != HEAD)) { |
| goto read_more; |
| } |
| |
| /* read complete, reuse/close depending on keepalive */ |
| finalize_connection(c, c->keepalive != 0); |
| } |
| |
| /* --------------------------------------------------------- */ |
| |
| /* run the tests */ |
| |
| static void start_worker(struct worker *worker); |
| #if APR_HAS_THREADS |
| static void join_worker(struct worker *worker); |
| #endif /* APR_HAS_THREADS */ |
| |
| #if (APR_HAS_THREADS \ |
| && (APR_HAVE_PTHREAD_H || defined(SIGPROCMASK_SETS_THREAD_MASK))) |
| #define USE_SIGMASK 1 |
| #else |
| #define USE_SIGMASK 0 |
| #endif |
| |
| static void init_signals(void) |
| { |
| #ifdef SIGINT |
| #if USE_SIGMASK |
| if (num_workers > 1) { |
| apr_status_t rv; |
| rv = apr_setup_signal_thread(); |
| if (rv != APR_SUCCESS) { |
| fatal_strerror("apr_setup_signal_thread()", rv); |
| } |
| } |
| #endif |
| /* Stop early on SIGINT */ |
| apr_signal(SIGINT, workers_may_exit); |
| #endif /* SIGINT */ |
| } |
| |
| #if APR_HAS_THREADS |
| static void block_signals(int block) |
| { |
| #ifdef SIGINT |
| #if USE_SIGMASK |
| sigset_t set; |
| sigemptyset(&set); |
| sigaddset(&set, SIGINT); |
| #if defined(SIGPROCMASK_SETS_THREAD_MASK) |
| sigprocmask(block ? SIG_BLOCK : SIG_UNBLOCK, &set, NULL); |
| #else |
| pthread_sigmask(block ? SIG_BLOCK : SIG_UNBLOCK, &set, NULL); |
| #endif |
| #endif /* USE_SIGMASK */ |
| #endif /* SIGINT */ |
| } |
| #endif /* APR_HAS_THREADS */ |
| |
| static int test(void) |
| { |
| apr_status_t rv; |
| int i, j; |
| int snprintf_res = 0; |
| #ifdef NOT_ASCII |
| apr_size_t inbytes_left, outbytes_left; |
| #endif |
| |
| if (isproxy) { |
| connecthost = apr_pstrdup(cntxt, proxyhost); |
| connectport = proxyport; |
| } |
| else { |
| connecthost = apr_pstrdup(cntxt, hostname); |
| connectport = port; |
| } |
| |
| if (!use_html) { |
| printf("Benchmarking %s ", hostname); |
| if (isproxy) |
| printf("[through %s:%d] ", proxyhost, proxyport); |
| printf("(be patient)%s", |
| (heartbeatres ? "\n" : "...")); |
| fflush(stdout); |
| } |
| |
| /* add default headers if necessary */ |
| if (!opt_host) { |
| /* Host: header not overridden, add default value to hdrs */ |
| hdrs = apr_pstrcat(cntxt, hdrs, "Host: ", host_field, colonhost, "\r\n", NULL); |
| } |
| else { |
| /* Header overridden, no need to add, as it is already in hdrs */ |
| } |
| |
| #ifdef HAVE_TLSEXT |
| if (is_ssl && tls_use_sni) { |
| apr_ipsubnet_t *ip; |
| if (((tls_sni = opt_host) || (tls_sni = hostname)) && |
| (!*tls_sni || apr_ipsubnet_create(&ip, tls_sni, NULL, |
| cntxt) == APR_SUCCESS)) { |
| /* IP not allowed in TLS SNI extension */ |
| tls_sni = NULL; |
| } |
| } |
| #endif |
| |
| if (!opt_useragent) { |
| /* User-Agent: header not overridden, add default value to hdrs */ |
| hdrs = apr_pstrcat(cntxt, hdrs, "User-Agent: ApacheBench/", AP_AB_BASEREVISION, "\r\n", NULL); |
| } |
| else { |
| /* Header overridden, no need to add, as it is already in hdrs */ |
| } |
| |
| if (!opt_accept) { |
| /* Accept: header not overridden, add default value to hdrs */ |
| hdrs = apr_pstrcat(cntxt, hdrs, "Accept: */*\r\n", NULL); |
| } |
| else { |
| /* Header overridden, no need to add, as it is already in hdrs */ |
| } |
| |
| /* setup request */ |
| if (!send_body) { |
| snprintf_res = apr_snprintf(request, sizeof(_request), |
| "%s %s HTTP/1.0\r\n" |
| "%s" "%s" "%s" |
| "%s" "\r\n", |
| method_str[method], |
| (isproxy) ? fullurl : path, |
| keepalive ? "Connection: Keep-Alive\r\n" : "", |
| cookie, auth, hdrs); |
| } |
| else { |
| snprintf_res = apr_snprintf(request, sizeof(_request), |
| "%s %s HTTP/1.0\r\n" |
| "%s" "%s" "%s" |
| "Content-length: %" APR_SIZE_T_FMT "\r\n" |
| "Content-type: %s\r\n" |
| "%s" |
| "\r\n", |
| method_str[method], |
| (isproxy) ? fullurl : path, |
| keepalive ? "Connection: Keep-Alive\r\n" : "", |
| cookie, auth, |
| postlen, |
| (content_type != NULL) ? content_type : "text/plain", hdrs); |
| } |
| if (snprintf_res >= sizeof(_request)) { |
| fatal_error("Request too long\n"); |
| } |
| |
| if (verbosity >= 2) |
| printf("INFO: %s header == \n---\n%s\n---\n", |
| method_str[method], request); |
| |
| reqlen = strlen(request); |
| |
| /* |
| * Combine headers and (optional) post file into one continuous buffer |
| */ |
| if (send_body) { |
| char *buff = apr_palloc(cntxt, postlen + reqlen + 1); |
| strcpy(buff, request); |
| memcpy(buff + reqlen, postdata, postlen); |
| request = buff; |
| } |
| |
| #ifdef NOT_ASCII |
| inbytes_left = outbytes_left = reqlen; |
| rv = apr_xlate_conv_buffer(to_ascii, request, &inbytes_left, |
| request, &outbytes_left); |
| if (rv || inbytes_left || outbytes_left) { |
| fprintf(stderr, "only simple translation is supported (%d/%" |
| APR_SIZE_T_FMT "/%" APR_SIZE_T_FMT ")\n", |
| rv, inbytes_left, outbytes_left); |
| exit(1); |
| } |
| #endif /* NOT_ASCII */ |
| |
| if (bind_count) { |
| /* This only needs to be done once */ |
| bind_addrs = apr_pcalloc(cntxt, bind_count * sizeof(apr_sockaddr_t*)); |
| for (i = 0; i < bind_count; ++i) { |
| if ((rv = apr_sockaddr_info_get(&bind_addrs[i], bind_hosts[i], |
| APR_UNSPEC, 0, 0, cntxt))) { |
| char buf[120]; |
| apr_snprintf(buf, sizeof(buf), |
| "apr_sockaddr_info_get() for %s", bind_hosts[i]); |
| fatal_strerror(buf, rv); |
| } |
| } |
| } |
| |
| /* This too */ |
| if ((rv = apr_sockaddr_info_get(&destsa, connecthost, |
| bind_count ? bind_addrs[0]->family : APR_UNSPEC, |
| connectport, 0, cntxt))) { |
| char buf[120]; |
| apr_snprintf(buf, sizeof(buf), |
| "apr_sockaddr_info_get() for %s", connecthost); |
| fatal_strerror(buf, rv); |
| } |
| |
| /* |
| * XXX: a way to calculate the stats without requiring O(requests) memory |
| * XXX: would be nice. |
| */ |
| stats = apr_pcalloc(cntxt, requests * sizeof(struct data)); |
| |
| conns = apr_pcalloc(cntxt, concurrency * sizeof(struct connection)); |
| |
| workers = apr_pcalloc(cntxt, num_workers * sizeof(struct worker)); |
| for (i = 0; i < num_workers; i++) { |
| struct worker *worker = &workers[i]; |
| |
| worker->slot = i; |
| worker->pool = cntxt; |
| worker->destsa = destsa; |
| worker->requests = requests / num_workers; |
| worker->concurrency = concurrency / num_workers; |
| worker->stats = &stats[i * worker->requests]; |
| worker->conns = &conns[i * worker->concurrency]; |
| for (j = 0; j < worker->concurrency; j++) { |
| worker->conns[j].worker = worker; |
| } |
| APR_RING_INIT(&worker->delayed_ring, connection, delay_list); |
| |
| #ifdef APR_POLLSET_WAKEABLE |
| rv = apr_pollset_create(&worker->pollset, worker->concurrency, |
| cntxt, APR_POLLSET_NOCOPY | APR_POLLSET_WAKEABLE); |
| if (rv == APR_SUCCESS) |
| pollset_wakeable = 1; |
| else if (APR_STATUS_IS_ENOTIMPL(rv)) |
| #endif |
| rv = apr_pollset_create(&worker->pollset, worker->concurrency, |
| cntxt, APR_POLLSET_NOCOPY); |
| if (rv != APR_SUCCESS) { |
| fatal_strerror("apr_pollset_create failed", rv); |
| } |
| } |
| |
| #if APR_HAS_THREADS |
| if (num_workers > 1) { |
| rv = apr_thread_mutex_create(&workers_mutex, APR_THREAD_MUTEX_DEFAULT, |
| cntxt); |
| if (rv != APR_SUCCESS) { |
| fatal_strerror("apr_thread_mutex_create()", rv); |
| } |
| rv = apr_thread_cond_create(&workers_can_start, cntxt); |
| if (rv != APR_SUCCESS) { |
| fatal_strerror("apr_thread_cond_create()", rv); |
| } |
| } |
| #endif |
| |
| init_signals(); |
| test_started = 1; |
| |
| /* ok - lets start */ |
| start = lasttime = apr_time_now(); |
| stoptime = tlimit ? start + apr_time_from_sec(tlimit) : AB_TIME_MAX; |
| |
| #if APR_HAS_THREADS |
| if (num_workers > 1) { |
| /* let the first worker determine if the connectivity is ok before |
| * starting the others (if any). |
| */ |
| block_signals(1); |
| start_worker(&workers[0]); |
| block_signals(0); |
| |
| /* wait for the first worker to tell us to continue */ |
| apr_thread_mutex_lock(workers_mutex); |
| if (workers_can_start) { /* might have been signaled & NULL-ed already */ |
| rv = apr_thread_cond_wait(workers_can_start, workers_mutex); |
| if (rv != APR_SUCCESS) { |
| fatal_strerror("apr_thread_cond_wait()", rv); |
| } |
| } |
| apr_thread_mutex_unlock(workers_mutex); |
| |
| /* start the others? */ |
| if (workers[0].succeeded_once) { |
| block_signals(1); |
| for (i = 1; i < num_workers; i++) { |
| start_worker(&workers[i]); |
| } |
| block_signals(0); |
| } |
| /* wait what's started only, join_worker() knows */ |
| for (i = 0; i < num_workers; i++) { |
| join_worker(&workers[i]); |
| } |
| } |
| else |
| #endif |
| start_worker(&workers[0]); |
| |
| return test_aborted != 0; |
| } |
| |
| static void worker_test(struct worker *worker) |
| { |
| apr_status_t rv; |
| apr_time_t poll_expiry = 0; |
| apr_time_t watchdog_expiry = 0; |
| struct connection *c; |
| apr_int16_t rtnev; |
| int i; |
| |
| /* initialise first connection to determine destination socket address |
| * which should be used for next connections. */ |
| start_connection(&worker->conns[0]); |
| |
| do { |
| apr_int32_t n; |
| const apr_pollfd_t *pollresults, *pollfd; |
| apr_interval_time_t t = aprtimeout; |
| apr_time_t now = 0; |
| |
| if (watchdog || !APR_RING_EMPTY(&worker->delayed_ring, connection, delay_list)) { |
| now = apr_time_now(); |
| if (poll_expiry == 0) { |
| poll_expiry = now + aprtimeout; |
| } |
| else if (t > poll_expiry - now) { |
| t = poll_expiry > now ? poll_expiry - now : 0; |
| } |
| if (watchdog) { |
| if (watchdog_expiry && watchdog_expiry <= now) { |
| int state; |
| apr_size_t len = 0; |
| len += apr_snprintf(worker->tmp + len, sizeof(worker->tmp) - len, |
| "Worker %d: requests %" APR_INT64_T_FMT "/%d, polls %d", |
| worker->slot, |
| worker->metrics.done, worker->requests, |
| worker->polls); |
| for (state = 0; state < STATE_COUNT; ++state) { |
| len += apr_snprintf(worker->tmp + len, sizeof(worker->tmp) - len, |
| ", %s %d/%d", |
| conn_state_str[state], |
| worker->counters[state][0], |
| worker->counters[state][1]); |
| } |
| fprintf(stderr, "%s\n", worker->tmp); |
| fflush(stderr); |
| } |
| if (watchdog_expiry <= now) { |
| watchdog_expiry = now + WATCHDOG_TIMEOUT; |
| } |
| if (t > WATCHDOG_TIMEOUT) { |
| t = WATCHDOG_TIMEOUT; |
| } |
| } |
| while (!APR_RING_EMPTY(&worker->delayed_ring, connection, delay_list)) { |
| c = APR_RING_FIRST(&worker->delayed_ring); |
| if (c->delay <= now) { |
| APR_RING_REMOVE(c, delay_list); |
| APR_RING_ELEM_INIT(c, delay_list); |
| c->delay = 0; |
| start_connection(c); |
| } |
| else { |
| if (t > c->delay - now) { |
| t = c->delay - now; |
| } |
| break; |
| } |
| } |
| } |
| |
| assert(worker->polls > 0); |
| n = worker->metrics.concurrent; |
| rv = apr_pollset_poll(worker->pollset, t, &n, &pollresults); |
| if (rv != APR_SUCCESS) { |
| if (APR_STATUS_IS_EINTR(rv) |
| || (APR_STATUS_IS_TIMEUP(rv) |
| && poll_expiry && poll_expiry > apr_time_now())) { |
| continue; |
| } |
| graceful_strerror("apr_pollset_poll", rv); |
| return; |
| } |
| poll_expiry = 0; |
| |
| for (i = 0, pollfd = pollresults; i < n; i++, pollfd++) { |
| c = pollfd->client_data; |
| |
| rtnev = pollfd->rtnevents; |
| |
| if (rtnev & APR_POLLOUT) { |
| if (c->state == STATE_CONNECTING) { |
| /* call connect() again to detect errors */ |
| rv = apr_socket_connect(c->aprsock, worker->destsa); |
| if (rv != APR_SUCCESS) { |
| try_reconnect(c, rv); |
| continue; |
| } |
| #ifdef USE_SSL |
| if (c->ssl) |
| set_conn_state(c, STATE_HANDSHAKE, 0); |
| else |
| #endif |
| set_conn_state(c, STATE_WRITE, 0); |
| } |
| switch (c->state) { |
| #ifdef USE_SSL |
| case STATE_HANDSHAKE: |
| ssl_proceed_handshake(c); |
| break; |
| #endif |
| case STATE_WRITE: |
| write_request(c); |
| break; |
| case STATE_READ: |
| read_response(c); |
| break; |
| default: |
| assert(0); |
| break; |
| } |
| |
| continue; |
| } |
| |
| /* |
| * Notes: APR_POLLHUP is set after FIN is received on some |
| * systems, so treat that like APR_POLLIN so that we try to read |
| * again. |
| * |
| * Some systems return APR_POLLERR with APR_POLLHUP. We need to |
| * call read_response() for APR_POLLHUP, so check for |
| * APR_POLLHUP first so that a closed connection isn't treated |
| * like an I/O error. If it is, we never figure out that the |
| * connection is done and we loop here endlessly calling |
| * apr_poll(). |
| */ |
| if (rtnev & (APR_POLLIN | APR_POLLHUP | APR_POLLPRI)) { |
| switch (c->state) { |
| #ifdef USE_SSL |
| case STATE_HANDSHAKE: |
| ssl_proceed_handshake(c); |
| break; |
| #endif |
| case STATE_WRITE: |
| write_request(c); |
| break; |
| case STATE_READ: |
| read_response(c); |
| break; |
| default: |
| assert(0); |
| break; |
| } |
| |
| continue; |
| } |
| |
| if (rtnev & (APR_POLLERR | APR_POLLNVAL)) { |
| if (c->state == STATE_CONNECTING) { |
| try_reconnect(c, APR_ENOPOLL); |
| } |
| else { |
| worker->metrics.err_except++; |
| abort_connection(c); |
| } |
| continue; |
| } |
| } |
| } while (!worker_should_stop(worker)); |
| } |
| |
| #if APR_HAS_THREADS |
| static void *APR_THREAD_FUNC worker_thread(apr_thread_t *thd, void *arg) |
| { |
| struct worker *worker = arg; |
| |
| worker->pool = apr_thread_pool_get(thd); |
| worker_test(worker); |
| |
| /* unblock the main thread if the first worker could never start successfully */ |
| if (num_workers > 1 && worker->slot == 0 && !worker->succeeded_once) { |
| apr_status_t rv; |
| apr_thread_mutex_lock(workers_mutex); |
| rv = apr_thread_cond_signal(workers_can_start); |
| if (rv != APR_SUCCESS) { |
| fatal_strerror("apr_thread_cond_wait()", rv); |
| } |
| workers_can_start = NULL; /* one shot */ |
| apr_thread_mutex_unlock(workers_mutex); |
| } |
| |
| apr_thread_exit(thd, APR_SUCCESS); |
| return NULL; |
| } |
| #endif |
| |
| static void start_worker(struct worker *worker) |
| { |
| #if APR_HAS_THREADS |
| if (num_workers > 1) { |
| apr_status_t rv; |
| rv = apr_thread_create(&worker->thd, NULL, worker_thread, worker, cntxt); |
| if (rv != APR_SUCCESS) { |
| if (worker->slot == 0) { |
| fatal_strerror("apr_thread_create()", rv); |
| } |
| else { |
| graceful_strerror("apr_thread_create()", rv); |
| } |
| return; |
| } |
| } |
| else |
| #endif /* APR_HAS_THREADS */ |
| worker_test(worker); |
| } |
| |
| #if APR_HAS_THREADS |
| static void join_worker(struct worker *worker) |
| { |
| apr_thread_t *thd = worker->thd; |
| if (thd) { |
| apr_status_t rv, thread_rv; |
| rv = apr_thread_join(&thread_rv, thd); |
| if (rv != APR_SUCCESS) { |
| fatal_strerror("apr_thread_join()", rv); |
| } |
| worker->thd = NULL; |
| } |
| } |
| #endif /* APR_HAS_THREADS */ |
| |
| static void workers_may_exit(int unused) |
| { |
| (void)unused; |
| |
| stoptime = 0; /* everyone stop now! */ |
| lasttime = apr_time_now(); /* record final time if interrupted */ |
| test_aborted = -1; |
| |
| #ifdef APR_POLLSET_WAKEABLE |
| /* wake up poll()ing workers */ |
| if (workers && pollset_wakeable) { |
| int i; |
| for (i = 0; i < num_workers; ++i) { |
| if (workers[i].pollset) { |
| apr_pollset_wakeup(workers[i].pollset); |
| } |
| } |
| } |
| #endif |
| } |
| |
| /* ------------------------------------------------------- */ |
| |
| /* display copyright information */ |
| static void copyright(void) |
| { |
| if (!use_html) { |
| printf("This is ApacheBench, Version %s\n", AP_AB_BASEREVISION " <$Revision$>"); |
| printf("Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://web.archive.org/web/20000304112933/http://www.zeustech.net/\n"); |
| printf("Licensed to The Apache Software Foundation, http://www.apache.org/\n"); |
| printf("\n"); |
| } |
| else { |
| printf("<p>\n"); |
| printf(" This is ApacheBench, Version %s <i><%s></i><br>\n", AP_AB_BASEREVISION, "$Revision$"); |
| printf(" Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://web.archive.org/web/20000304112933/http://www.zeustech.net/<br>\n"); |
| printf(" Licensed to The Apache Software Foundation, http://www.apache.org/<br>\n"); |
| printf("</p>\n<p>\n"); |
| } |
| } |
| |
| /* display usage information */ |
| static void usage(const char *progname) |
| { |
| fprintf(stderr, "Usage: %s [options] [http" |
| #ifdef USE_SSL |
| "[s]" |
| #endif |
| "://]hostname[:port]/path\n", progname); |
| /* 80 column ruler: ******************************************************************************** |
| */ |
| fprintf(stderr, "Options are:\n"); |
| fprintf(stderr, " -n requests Number of requests to perform\n"); |
| fprintf(stderr, " -c concurrency Number of multiple requests to make at a time\n"); |
| fprintf(stderr, " -W workers Number of concurrent worker threads\n"); |
| fprintf(stderr, " -t timelimit Seconds to max. to spend on benchmarking\n"); |
| fprintf(stderr, " This implies -n 50000\n"); |
| fprintf(stderr, " -s timeout Seconds to max. wait for each response\n"); |
| fprintf(stderr, " Default is 30 seconds\n"); |
| fprintf(stderr, " -R rampdelay Milliseconds in between each new connection when starting up\n"); |
| fprintf(stderr, " Default is no delay\n"); |
| fprintf(stderr, " -b windowsize Size of TCP send/receive buffer, in bytes\n"); |
| fprintf(stderr, " -B addr[,addr]* Address[es] to bind to when making outgoing connections\n"); |
| fprintf(stderr, " -p postfile File containing data to POST. Remember also to set -T\n"); |
| fprintf(stderr, " -u putfile File containing data to PUT. Remember also to set -T\n"); |
| fprintf(stderr, " -T content-type Content-type header to use for POST/PUT data, eg.\n"); |
| fprintf(stderr, " 'application/x-www-form-urlencoded'\n"); |
| fprintf(stderr, " Default is 'text/plain'\n"); |
| fprintf(stderr, " -v verbosity How much troubleshooting info to print\n"); |
| fprintf(stderr, " -w Print out results in HTML tables\n"); |
| fprintf(stderr, " -i Use HEAD instead of GET\n"); |
| fprintf(stderr, " -x attributes String to insert as table attributes\n"); |
| fprintf(stderr, " -y attributes String to insert as tr attributes\n"); |
| fprintf(stderr, " -z attributes String to insert as td or th attributes\n"); |
| fprintf(stderr, " -C attribute Add cookie, eg. 'Apache=1234'. (repeatable)\n"); |
| fprintf(stderr, " -H attribute Add Arbitrary header line, eg. 'Accept-Encoding: gzip'\n"); |
| fprintf(stderr, " Inserted after all normal header lines. (repeatable)\n"); |
| fprintf(stderr, " -A attribute Add Basic WWW Authentication, the attributes\n"); |
| fprintf(stderr, " are a colon separated username and password.\n"); |
| fprintf(stderr, " -P attribute Add Basic Proxy Authentication, the attributes\n"); |
| fprintf(stderr, " are a colon separated username and password.\n"); |
| fprintf(stderr, " -X proxy:port Proxyserver and port number to use\n"); |
| fprintf(stderr, " -o src_address Set the local source address\n"); |
| fprintf(stderr, " -V Print version number and exit\n"); |
| fprintf(stderr, " -k Use HTTP KeepAlive feature\n"); |
| fprintf(stderr, " -d Do not show percentiles served table.\n"); |
| fprintf(stderr, " -S Do not show confidence estimators and warnings.\n"); |
| fprintf(stderr, " -q Do not show progress when doing more than 150 requests\n"); |
| fprintf(stderr, " -Q Do not show copyright banner\n"); |
| fprintf(stderr, " -l Accept variable document length (use this for dynamic pages)\n"); |
| fprintf(stderr, " -g filename Output collected data to gnuplot format file.\n"); |
| fprintf(stderr, " -e filename Output CSV file with percentages served\n"); |
| fprintf(stderr, " -r Don't exit on socket receive errors.\n"); |
| fprintf(stderr, " -m method Method name\n"); |
| fprintf(stderr, " -D Debug watchdog to show some counters during runtime\n"); |
| fprintf(stderr, " -h Display usage information (this message)\n"); |
| #ifdef USE_SSL |
| |
| #ifndef OPENSSL_NO_SSL2 |
| #define SSL2_HELP_MSG "SSL2, " |
| #else |
| #define SSL2_HELP_MSG "" |
| #endif |
| |
| #ifndef OPENSSL_NO_SSL3 |
| #define SSL3_HELP_MSG "SSL3, " |
| #else |
| #define SSL3_HELP_MSG "" |
| #endif |
| |
| #ifdef HAVE_TLSV1_X |
| |
| #ifdef TLS1_3_VERSION |
| #define TLS1_X_HELP_MSG ", TLS1.1, TLS1.2, TLS1.3" |
| #else |
| #define TLS1_X_HELP_MSG ", TLS1.1, TLS1.2" |
| #endif |
| |
| #else |
| #define TLS1_X_HELP_MSG "" |
| #endif |
| |
| #ifdef HAVE_TLSEXT |
| fprintf(stderr, " -I Disable TLS Server Name Indication (SNI) extension\n"); |
| #endif |
| fprintf(stderr, " -Z ciphersuite Specify SSL/TLS cipher suite (See openssl ciphers)\n"); |
| fprintf(stderr, " -f protocol Specify SSL/TLS protocol\n"); |
| fprintf(stderr, " (" SSL2_HELP_MSG SSL3_HELP_MSG "TLS1" TLS1_X_HELP_MSG " or ALL)\n"); |
| fprintf(stderr, " -E certfile Specify optional client certificate chain and private key\n"); |
| #endif |
| exit(EINVAL); |
| } |
| |
| /* ------------------------------------------------------- */ |
| |
| /* split URL into parts */ |
| |
| static int parse_url(const char *url) |
| { |
| char *cp; |
| char *h; |
| char *scope_id; |
| apr_status_t rv; |
| |
| /* Save a copy for the proxy */ |
| fullurl = apr_pstrdup(cntxt, url); |
| |
| if (strlen(url) > 7 && strncmp(url, "http://", 7) == 0) { |
| url += 7; |
| #ifdef USE_SSL |
| is_ssl = 0; |
| #endif |
| } |
| else |
| #ifdef USE_SSL |
| if (strlen(url) > 8 && strncmp(url, "https://", 8) == 0) { |
| url += 8; |
| is_ssl = 1; |
| } |
| #else |
| if (strlen(url) > 8 && strncmp(url, "https://", 8) == 0) { |
| fprintf(stderr, "SSL not compiled in; no https support\n"); |
| exit(1); |
| } |
| #endif |
| |
| if ((cp = strchr(url, '/')) == NULL) |
| return 1; |
| h = apr_pstrmemdup(cntxt, url, cp - url); |
| rv = apr_parse_addr_port(&hostname, &scope_id, &port, h, cntxt); |
| if (rv != APR_SUCCESS || !hostname || scope_id) { |
| return 1; |
| } |
| path = apr_pstrdup(cntxt, cp); |
| *cp = '\0'; |
| if (*url == '[') { /* IPv6 numeric address string */ |
| host_field = apr_psprintf(cntxt, "[%s]", hostname); |
| } |
| else { |
| host_field = hostname; |
| } |
| |
| if (port == 0) { /* no port specified */ |
| #ifdef USE_SSL |
| if (is_ssl) |
| port = 443; |
| else |
| #endif |
| port = 80; |
| } |
| |
| if (( |
| #ifdef USE_SSL |
| is_ssl && (port != 443)) || (!is_ssl && |
| #endif |
| (port != 80))) |
| { |
| colonhost = apr_psprintf(cntxt,":%d",port); |
| } else |
| colonhost = ""; |
| return 0; |
| } |
| |
| /* ------------------------------------------------------- */ |
| |
| /* read data to POST/PUT from file, save contents and length */ |
| |
| static apr_status_t open_postfile(const char *pfile) |
| { |
| apr_file_t *postfd; |
| apr_finfo_t finfo; |
| apr_status_t rv; |
| char errmsg[120]; |
| |
| rv = apr_file_open(&postfd, pfile, APR_READ, APR_OS_DEFAULT, cntxt); |
| if (rv != APR_SUCCESS) { |
| fprintf(stderr, "ab: Could not open POST data file (%s): %s\n", pfile, |
| apr_strerror(rv, errmsg, sizeof errmsg)); |
| return rv; |
| } |
| |
| rv = apr_file_info_get(&finfo, APR_FINFO_NORM, postfd); |
| if (rv != APR_SUCCESS) { |
| fprintf(stderr, "ab: Could not stat POST data file (%s): %s\n", pfile, |
| apr_strerror(rv, errmsg, sizeof errmsg)); |
| return rv; |
| } |
| postlen = (apr_size_t)finfo.size; |
| postdata = apr_palloc(cntxt, postlen); |
| rv = apr_file_read_full(postfd, postdata, postlen, NULL); |
| if (rv != APR_SUCCESS) { |
| fprintf(stderr, "ab: Could not read POST data file: %s\n", |
| apr_strerror(rv, errmsg, sizeof errmsg)); |
| return rv; |
| } |
| apr_file_close(postfd); |
| return APR_SUCCESS; |
| } |
| |
| static void output_results_at_exit(void) |
| { |
| if (test_started) { |
| consolidate_metrics(); |
| |
| if (test_aborted <= 0) { |
| if (heartbeatres) |
| fprintf(stderr, "Finished %" APR_INT64_T_FMT " requests%s\n", |
| metrics.done, stoptime ? "" : " (interrupted)"); |
| else if (!stoptime) |
| printf("..interrupted\n"); |
| else |
| printf("..done\n"); |
| } |
| else if (metrics.done) { |
| printf("Total of %" APR_INT64_T_FMT " requests completed\n" , |
| metrics.done); |
| } |
| |
| if (use_html) |
| output_html_results(); |
| else |
| output_results(); |
| } |
| |
| apr_pool_destroy(cntxt); |
| apr_terminate(); |
| } |
| |
| /* ------------------------------------------------------- */ |
| |
| /* sort out command-line args and call test */ |
| int main(int argc, const char * const argv[]) |
| { |
| char tmp[1024]; |
| apr_status_t status; |
| apr_getopt_t *opt; |
| const char *opt_arg; |
| char c; |
| #ifdef USE_SSL |
| #if OPENSSL_VERSION_NUMBER >= 0x10100000L |
| int max_prot = MAX_SSL_PROTO; |
| int min_prot = MIN_SSL_PROTO; |
| #endif /* #if OPENSSL_VERSION_NUMBER >= 0x10100000L */ |
| AB_SSL_METHOD_CONST SSL_METHOD *meth = SSLv23_client_method(); |
| #endif /* USE_SSL */ |
| |
| srand((unsigned int)apr_time_now()); |
| |
| /* table defaults */ |
| tablestring = ""; |
| trstring = ""; |
| tdstring = "bgcolor=white"; |
| cookie = ""; |
| auth = ""; |
| proxyhost = ""; |
| hdrs = ""; |
| |
| apr_app_initialize(&argc, &argv, NULL); |
| if (apr_pool_create(&cntxt, NULL) != APR_SUCCESS) { |
| abort_on_oom(APR_ENOMEM); |
| } |
| apr_pool_abort_set(abort_on_oom, cntxt); |
| atexit(output_results_at_exit); |
| |
| #ifdef NOT_ASCII |
| status = apr_xlate_open(&to_ascii, "ISO-8859-1", APR_DEFAULT_CHARSET, cntxt); |
| if (status) { |
| fprintf(stderr, "apr_xlate_open(to ASCII)->%d\n", status); |
| exit(1); |
| } |
| status = apr_xlate_open(&from_ascii, APR_DEFAULT_CHARSET, "ISO-8859-1", cntxt); |
| if (status) { |
| fprintf(stderr, "apr_xlate_open(from ASCII)->%d\n", status); |
| exit(1); |
| } |
| status = apr_base64init_ebcdic(to_ascii, from_ascii); |
| if (status) { |
| fprintf(stderr, "apr_base64init_ebcdic()->%d\n", status); |
| exit(1); |
| } |
| #endif |
| |
| apr_getopt_init(&opt, cntxt, argc, argv); |
| while ((status = apr_getopt(opt, "n:c:t:s:b:T:p:u:v:lrkVhwiIx:y:z:C:H:P:A:g:X:de:SqQDB:m:R:o:" |
| #if APR_HAS_THREADS |
| "W:" |
| #endif |
| #ifdef USE_SSL |
| "Z:f:E:" |
| #endif |
| ,&c, &opt_arg)) == APR_SUCCESS) { |
| switch (c) { |
| case 'n': |
| requests = atoi(opt_arg); |
| if (requests <= 0) { |
| fatal_error("Invalid number of requests\n"); |
| } |
| break; |
| #if APR_HAS_THREADS |
| case 'W': |
| num_workers = atoi(opt_arg); |
| if (num_workers < 0) { |
| fatal_error("Invalid number of workers\n"); |
| } |
| break; |
| #endif |
| case 'k': |
| keepalive = 1; |
| break; |
| case 'o': |
| src_address = strdup(opt_arg); |
| break; |
| case 'q': |
| heartbeatres = 0; |
| break; |
| case 'Q': |
| no_banner = 1; |
| break; |
| case 'D': |
| watchdog = 1; |
| break; |
| case 'c': |
| concurrency = atoi(opt_arg); |
| if (concurrency < 0) { |
| fatal_error("Invalid negative concurrency\n"); |
| } |
| break; |
| case 'b': |
| windowsize = atoi(opt_arg); |
| break; |
| case 'i': |
| if (method != NO_METH) |
| fatal_error("Cannot mix HEAD with other methods\n"); |
| method = HEAD; |
| break; |
| case 'g': |
| gnuplot = apr_pstrdup(cntxt, opt_arg); |
| break; |
| case 'd': |
| percentile = 0; |
| break; |
| case 'e': |
| csvperc = apr_pstrdup(cntxt, opt_arg); |
| break; |
| case 'S': |
| confidence = 0; |
| break; |
| case 's': |
| aprtimeout = apr_time_from_sec(atoi(opt_arg)); /* timeout value */ |
| break; |
| case 'R': |
| ramp = apr_time_from_msec(atoi(opt_arg)); /* ramp delay */ |
| break; |
| case 'p': |
| if (method != NO_METH) |
| fatal_error("Cannot mix POST with other methods\n"); |
| if (open_postfile(opt_arg) != APR_SUCCESS) { |
| exit(1); |
| } |
| method = POST; |
| send_body = 1; |
| break; |
| case 'u': |
| if (method != NO_METH) |
| fatal_error("Cannot mix PUT with other methods\n"); |
| if (open_postfile(opt_arg) != APR_SUCCESS) { |
| exit(1); |
| } |
| method = PUT; |
| send_body = 1; |
| break; |
| case 'l': |
| nolength = 1; |
| break; |
| case 'r': |
| recverrok = 1; |
| break; |
| case 'v': |
| verbosity = atoi(opt_arg); |
| break; |
| case 't': |
| tlimit = atoi(opt_arg); |
| if (tlimit < 0) |
| fatal_error("Invalid negative timelimit\n"); |
| break; |
| case 'T': |
| content_type = apr_pstrdup(cntxt, opt_arg); |
| break; |
| case 'C': |
| cookie = apr_pstrcat(cntxt, "Cookie: ", opt_arg, "\r\n", NULL); |
| break; |
| case 'A': |
| /* |
| * assume username passwd already to be in colon separated form. |
| * Ready to be uu-encoded. |
| */ |
| while (apr_isspace(*opt_arg)) |
| opt_arg++; |
| if (apr_base64_encode_len(strlen(opt_arg)) > sizeof(tmp)) { |
| fatal_error("Authentication credentials too long\n"); |
| } |
| apr_base64_encode(tmp, opt_arg, strlen(opt_arg)); |
| |
| auth = apr_pstrcat(cntxt, auth, "Authorization: Basic ", tmp, |
| "\r\n", NULL); |
| break; |
| case 'P': |
| /* |
| * assume username passwd already to be in colon separated form. |
| */ |
| while (apr_isspace(*opt_arg)) |
| opt_arg++; |
| if (apr_base64_encode_len(strlen(opt_arg)) > sizeof(tmp)) { |
| fatal_error("Proxy credentials too long\n"); |
| } |
| apr_base64_encode(tmp, opt_arg, strlen(opt_arg)); |
| |
| auth = apr_pstrcat(cntxt, auth, "Proxy-Authorization: Basic ", |
| tmp, "\r\n", NULL); |
| break; |
| case 'H': |
| hdrs = apr_pstrcat(cntxt, hdrs, opt_arg, "\r\n", NULL); |
| /* |
| * allow override of some of the common headers that ab adds |
| */ |
| if (strncasecmp(opt_arg, "Host:", 5) == 0) { |
| char *host; |
| apr_size_t len; |
| opt_arg += 5; |
| while (apr_isspace(*opt_arg)) |
| opt_arg++; |
| len = strlen(opt_arg); |
| host = strdup(opt_arg); |
| while (len && apr_isspace(host[len-1])) |
| host[--len] = '\0'; |
| opt_host = host; |
| } else if (strncasecmp(opt_arg, "Accept:", 7) == 0) { |
| opt_accept = 1; |
| } else if (strncasecmp(opt_arg, "User-Agent:", 11) == 0) { |
| opt_useragent = 1; |
| } |
| break; |
| case 'w': |
| use_html = 1; |
| break; |
| /* |
| * if any of the following three are used, turn on html output |
| * automatically |
| */ |
| case 'x': |
| use_html = 1; |
| tablestring = opt_arg; |
| break; |
| case 'X': |
| { |
| char *p; |
| /* |
| * assume proxy-name[:port] |
| */ |
| if ((p = strchr(opt_arg, ':'))) { |
| *p = '\0'; |
| p++; |
| proxyport = atoi(p); |
| } |
| proxyhost = apr_pstrdup(cntxt, opt_arg); |
| isproxy = 1; |
| } |
| break; |
| case 'y': |
| use_html = 1; |
| trstring = opt_arg; |
| break; |
| case 'z': |
| use_html = 1; |
| tdstring = opt_arg; |
| break; |
| case 'h': |
| usage(argv[0]); |
| break; |
| case 'V': |
| copyright(); |
| return 0; |
| case 'B': |
| { |
| const char *ptr, *end; |
| |
| bind_count = 1; |
| for (ptr = opt_arg; (end = strchr(ptr, ',')); ptr = end + 1) { |
| bind_count++; |
| } |
| bind_hosts = apr_palloc(cntxt, bind_count * sizeof(char*)); |
| |
| bind_count = 0; |
| for (ptr = opt_arg; (end = strchr(ptr, ',')); ptr = end + 1) { |
| if (end > ptr) { |
| bind_hosts[bind_count++] = apr_pstrmemdup(cntxt, ptr, end - ptr); |
| } |
| } |
| if (*ptr) { |
| bind_hosts[bind_count++] = apr_pstrdup(cntxt, ptr); |
| } |
| |
| if (!bind_count) { |
| fprintf(stderr, "%s: Invalid bind address[es]\n", argv[0]); |
| usage(argv[0]); |
| } |
| } |
| break; |
| case 'm': |
| method = CUSTOM_METHOD; |
| method_str[CUSTOM_METHOD] = strdup(opt_arg); |
| break; |
| #ifdef USE_SSL |
| case 'Z': |
| ssl_cipher = strdup(opt_arg); |
| break; |
| case 'E': |
| ssl_cert = strdup(opt_arg); |
| break; |
| case 'f': |
| #if OPENSSL_VERSION_NUMBER < 0x10100000L |
| if (strncasecmp(opt_arg, "ALL", 3) == 0) { |
| meth = SSLv23_client_method(); |
| #ifndef OPENSSL_NO_SSL2 |
| } else if (strncasecmp(opt_arg, "SSL2", 4) == 0) { |
| meth = SSLv2_client_method(); |
| #ifdef HAVE_TLSEXT |
| tls_use_sni = 0; |
| #endif |
| #endif |
| #ifndef OPENSSL_NO_SSL3 |
| } else if (strncasecmp(opt_arg, "SSL3", 4) == 0) { |
| meth = SSLv3_client_method(); |
| #ifdef HAVE_TLSEXT |
| tls_use_sni = 0; |
| #endif |
| #endif |
| #ifdef HAVE_TLSV1_X |
| } else if (strncasecmp(opt_arg, "TLS1.1", 6) == 0) { |
| meth = TLSv1_1_client_method(); |
| } else if (strncasecmp(opt_arg, "TLS1.2", 6) == 0) { |
| meth = TLSv1_2_client_method(); |
| #endif |
| } else if (strncasecmp(opt_arg, "TLS1", 4) == 0) { |
| meth = TLSv1_client_method(); |
| } |
| #else /* #if OPENSSL_VERSION_NUMBER < 0x10100000L */ |
| meth = TLS_client_method(); |
| if (strncasecmp(opt_arg, "ALL", 3) == 0) { |
| max_prot = MAX_SSL_PROTO; |
| min_prot = MIN_SSL_PROTO; |
| #ifndef OPENSSL_NO_SSL3 |
| } else if (strncasecmp(opt_arg, "SSL3", 4) == 0) { |
| max_prot = SSL3_VERSION; |
| min_prot = SSL3_VERSION; |
| #endif |
| } else if (strncasecmp(opt_arg, "TLS1.1", 6) == 0) { |
| max_prot = TLS1_1_VERSION; |
| min_prot = TLS1_1_VERSION; |
| } else if (strncasecmp(opt_arg, "TLS1.2", 6) == 0) { |
| max_prot = TLS1_2_VERSION; |
| min_prot = TLS1_2_VERSION; |
| #ifdef TLS1_3_VERSION |
| } else if (strncasecmp(opt_arg, "TLS1.3", 6) == 0) { |
| max_prot = TLS1_3_VERSION; |
| min_prot = TLS1_3_VERSION; |
| #endif |
| } else if (strncasecmp(opt_arg, "TLS1", 4) == 0) { |
| max_prot = TLS1_VERSION; |
| min_prot = TLS1_VERSION; |
| } |
| #endif /* #if OPENSSL_VERSION_NUMBER < 0x10100000L */ |
| break; |
| #ifdef HAVE_TLSEXT |
| case 'I': |
| tls_use_sni = 0; |
| break; |
| #endif |
| #endif /* USE_SSL */ |
| } |
| } |
| |
| if (status != APR_EOF || opt->ind != argc - 1) { |
| fprintf(stderr, "%s: Invalid or missing arguments\n", argv[0]); |
| usage(argv[0]); |
| } |
| |
| if (method == NO_METH) { |
| method = GET; |
| } |
| |
| if (parse_url(apr_pstrdup(cntxt, opt->argv[opt->ind++]))) { |
| fprintf(stderr, "%s: invalid URL\n", argv[0]); |
| usage(argv[0]); |
| } |
| |
| rlimited = !tlimit || requests > 0; |
| if (requests == 0) { |
| requests = tlimit ? TIMED_REQUESTS : 1; |
| } |
| |
| #if APR_HAS_THREADS |
| if (num_workers == 0) { |
| #ifdef _SC_NPROCESSORS_ONLN |
| num_workers = sysconf(_SC_NPROCESSORS_ONLN); |
| #else |
| fatal_error("-W0 not implemented on this platform\n"); |
| #endif |
| } |
| if (num_workers > 1) { |
| requests = ROUND_UP(requests, num_workers); |
| concurrency = ROUND_UP(concurrency, num_workers); |
| } |
| else { |
| num_workers = 1; |
| } |
| #endif /* APR_HAS_THREADS */ |
| |
| if (concurrency == 0) { |
| concurrency = num_workers; |
| } |
| if (concurrency > ROUND_UP(MAX_CONCURRENCY, num_workers)) { |
| fprintf(stderr, "%s: Invalid Concurrency [Range 0..%d]\n", |
| argv[0], ROUND_UP(MAX_CONCURRENCY, num_workers)); |
| usage(argv[0]); |
| } |
| if (concurrency > requests) { |
| fprintf(stderr, "%s: Cannot use concurrency level greater than " |
| "total number of requests\n", argv[0]); |
| usage(argv[0]); |
| } |
| |
| if (tlimit) { |
| /* Print line every 10% of time */ |
| hbperiod = apr_time_from_sec(tlimit) / 10; |
| if (hbperiod < apr_time_from_sec(1)) { |
| hbperiod = apr_time_from_sec(1); |
| } |
| else if (hbperiod > apr_time_from_sec(60)) { |
| hbperiod = apr_time_from_sec(60); |
| } |
| } |
| else if ((heartbeatres) && (requests > 150)) { |
| heartbeatres = requests / 10; /* Print line every 10% of requests */ |
| if (heartbeatres < 100) |
| heartbeatres = 100; /* but never more often than once every 100 |
| * connections. */ |
| } |
| else |
| heartbeatres = 0; |
| |
| #ifdef USE_SSL |
| #ifdef RSAREF |
| R_malloc_init(); |
| #else |
| #if OPENSSL_VERSION_NUMBER < 0x10100000L |
| CRYPTO_malloc_init(); |
| #endif |
| #endif |
| SSL_load_error_strings(); |
| SSL_library_init(); |
| if(!(bio_out = BIO_new_fp(stdout,BIO_NOCLOSE))) { |
| fprintf(stderr, "%s: Cannot allocate memory", argv[0]); |
| exit(1); |
| } |
| if(!(bio_err = BIO_new_fp(stderr,BIO_NOCLOSE))) { |
| fprintf(stderr, "%s: Cannot allocate memory", argv[0]); |
| exit(1); |
| } |
| |
| #if OPENSSL_VERSION_NUMBER >= 0x10101000 |
| if (RAND_status() == 0) { |
| fprintf(stderr, "%s: Error: Crypto library PRNG does not contain " |
| "sufficient randomness.\n" |
| "%s: Build the library with a suitable entropy source configured.\n", |
| argv[0], argv[0]); |
| exit(1); |
| } |
| #endif |
| |
| if (!(ssl_ctx = SSL_CTX_new(meth))) { |
| BIO_printf(bio_err, "Could not initialize SSL Context.\n"); |
| ERR_print_errors(bio_err); |
| fatal_error("SSL_CTX_new failed"); |
| } |
| SSL_CTX_set_options(ssl_ctx, SSL_OP_ALL); |
| #if OPENSSL_VERSION_NUMBER >= 0x10100000L |
| SSL_CTX_set_max_proto_version(ssl_ctx, max_prot); |
| SSL_CTX_set_min_proto_version(ssl_ctx, min_prot); |
| #endif |
| #ifdef SSL_MODE_RELEASE_BUFFERS |
| /* Keep memory usage as low as possible */ |
| SSL_CTX_set_mode (ssl_ctx, SSL_MODE_RELEASE_BUFFERS); |
| #endif |
| |
| if (ssl_cipher != NULL) { |
| int ok; |
| #if OPENSSL_VERSION_NUMBER >= 0x10101000L && defined(TLS1_3_VERSION) |
| if (min_prot >= TLS1_3_VERSION) |
| ok = SSL_CTX_set_ciphersuites(ssl_ctx, ssl_cipher); |
| else |
| #endif |
| ok = SSL_CTX_set_cipher_list(ssl_ctx, ssl_cipher); |
| if (!ok) { |
| BIO_printf(bio_err, "error setting ciphersuite list [%s]\n", |
| ssl_cipher); |
| ERR_print_errors(bio_err); |
| fatal_error("SSL_CTX_set_cipher_list failed"); |
| } |
| } |
| |
| if (verbosity >= 3) { |
| SSL_CTX_set_info_callback(ssl_ctx, ssl_state_cb); |
| } |
| if (ssl_cert != NULL) { |
| if (SSL_CTX_use_certificate_chain_file(ssl_ctx, ssl_cert) <= 0) { |
| BIO_printf(bio_err, "unable to get certificate from '%s'\n", |
| ssl_cert); |
| ERR_print_errors(bio_err); |
| fatal_error("SSL_CTX_use_certificate_chain_file failed"); |
| } |
| if (SSL_CTX_use_PrivateKey_file(ssl_ctx, ssl_cert, SSL_FILETYPE_PEM) <= 0) { |
| BIO_printf(bio_err, "unable to get private key from '%s'\n", |
| ssl_cert); |
| ERR_print_errors(bio_err); |
| fatal_error("SSL_CTX_use_PrivateKey_file failed"); |
| } |
| if (!SSL_CTX_check_private_key(ssl_ctx)) { |
| BIO_printf(bio_err, |
| "private key does not match the certificate public key in %s\n", ssl_cert); |
| ERR_print_errors(bio_err); |
| fatal_error("SSL_CTX_check_private_key failed"); |
| } |
| } |
| |
| #endif |
| #ifdef SIGPIPE |
| apr_signal(SIGPIPE, SIG_IGN); /* Ignore writes to connections that |
| * have been closed at the other end. */ |
| #endif |
| |
| if (!no_banner) { |
| copyright(); |
| } |
| |
| return test(); |
| } |