| /* Copyright 2015 greenbytes GmbH (https://www.greenbytes.de) |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #ifndef __mod_h2__h2_stream__ |
| #define __mod_h2__h2_stream__ |
| |
| #include "h2.h" |
| |
| /** |
| * A HTTP/2 stream, e.g. a client request+response in HTTP/1.1 terms. |
| * |
| * A stream always belongs to a h2_session, the one managing the |
| * connection to the client. The h2_session writes to the h2_stream, |
| * adding HEADERS and DATA and finally an EOS. When headers are done, |
| * h2_stream is scheduled for handling, which is expected to produce |
| * a h2_headers. |
| * |
| * The h2_headers gives the HEADER frames to sent to the client, followed |
| * by DATA frames read from the h2_stream until EOS is reached. |
| */ |
| |
| struct h2_mplx; |
| struct h2_priority; |
| struct h2_request; |
| struct h2_headers; |
| struct h2_session; |
| struct h2_sos; |
| struct h2_bucket_beam; |
| |
| typedef struct h2_stream h2_stream; |
| |
| struct h2_stream { |
| int id; /* http2 stream id */ |
| int initiated_on; /* initiating stream id (PUSH) or 0 */ |
| apr_time_t created; /* when stream was created */ |
| h2_stream_state_t state; /* http/2 state of this stream */ |
| struct h2_session *session; /* the session this stream belongs to */ |
| |
| apr_pool_t *pool; /* the memory pool for this stream */ |
| const struct h2_request *request; /* the request made in this stream */ |
| struct h2_request *rtmp; /* request being assembled */ |
| apr_table_t *trailers; /* optional incoming trailers */ |
| int request_headers_added; /* number of request headers added */ |
| |
| struct h2_bucket_beam *input; |
| struct h2_bucket_beam *output; |
| apr_bucket_brigade *out_buffer; |
| apr_array_header_t *files; /* apr_file_t* we collected during I/O */ |
| |
| int rst_error; /* stream error for RST_STREAM */ |
| unsigned int aborted : 1; /* was aborted */ |
| unsigned int scheduled : 1; /* stream has been scheduled */ |
| unsigned int started : 1; /* stream has started processing */ |
| unsigned int has_response : 1; /* response headers are known */ |
| unsigned int push_policy; /* which push policy to use for this request */ |
| unsigned int can_be_cleaned : 1; /* stream pool can be cleaned */ |
| |
| const h2_priority *pref_priority; /* preferred priority for this stream */ |
| apr_off_t out_data_frames; /* # of DATA frames sent */ |
| apr_off_t out_data_octets; /* # of DATA octets (payload) sent */ |
| apr_off_t in_data_frames; /* # of DATA frames received */ |
| apr_off_t in_data_octets; /* # of DATA octets (payload) received */ |
| |
| const char *sos_filter; |
| }; |
| |
| |
| #define H2_STREAM_RST(s, def) (s->rst_error? s->rst_error : (def)) |
| |
| /** |
| * Create a stream in OPEN state. |
| * @param id the stream identifier |
| * @param pool the memory pool to use for this stream |
| * @param session the session this stream belongs to |
| * @return the newly opened stream |
| */ |
| h2_stream *h2_stream_open(int id, apr_pool_t *pool, struct h2_session *session, |
| int initiated_on); |
| |
| /** |
| * Cleanup any resources still held by the stream, called by last bucket. |
| */ |
| void h2_stream_eos_destroy(h2_stream *stream); |
| |
| /** |
| * Destroy memory pool if still owned by the stream. |
| */ |
| void h2_stream_destroy(h2_stream *stream); |
| |
| /** |
| * Cleanup references into requst processing. |
| * |
| * @param stream the stream to cleanup |
| */ |
| void h2_stream_cleanup(h2_stream *stream); |
| |
| /** |
| * Detach the memory pool from the stream. Will prevent stream |
| * destruction to take the pool with it. |
| * |
| * @param stream the stream to detach the pool from |
| * @result the detached memory pool or NULL if stream no longer has one |
| */ |
| apr_pool_t *h2_stream_detach_pool(h2_stream *stream); |
| |
| /** |
| * Initialize stream->request with the given h2_request. |
| * |
| * @param stream stream to write request to |
| * @param r the request with all the meta data |
| */ |
| apr_status_t h2_stream_set_request(h2_stream *stream, const h2_request *r); |
| |
| /** |
| * Initialize stream->request with the given request_rec. |
| * |
| * @param stream stream to write request to |
| * @param r the request with all the meta data |
| */ |
| apr_status_t h2_stream_set_request_rec(h2_stream *stream, request_rec *r); |
| |
| /* |
| * Add a HTTP/2 header (including pseudo headers) or trailer |
| * to the given stream, depending on stream state. |
| * |
| * @param stream stream to write the header to |
| * @param name the name of the HTTP/2 header |
| * @param nlen the number of characters in name |
| * @param value the header value |
| * @param vlen the number of characters in value |
| */ |
| apr_status_t h2_stream_add_header(h2_stream *stream, |
| const char *name, size_t nlen, |
| const char *value, size_t vlen); |
| |
| /** |
| * Closes the stream's input. |
| * |
| * @param stream stream to close intput of |
| */ |
| apr_status_t h2_stream_close_input(h2_stream *stream); |
| |
| /* |
| * Write a chunk of DATA to the stream. |
| * |
| * @param stream stream to write the data to |
| * @param data the beginning of the bytes to write |
| * @param len the number of bytes to write |
| */ |
| apr_status_t h2_stream_write_data(h2_stream *stream, |
| const char *data, size_t len, int eos); |
| |
| /** |
| * Reset the stream. Stream write/reads will return errors afterwards. |
| * |
| * @param stream the stream to reset |
| * @param error_code the HTTP/2 error code |
| */ |
| void h2_stream_rst(h2_stream *stream, int error_code); |
| |
| /** |
| * Schedule the stream for execution. All header information must be |
| * present. Use the given priority comparison callback to determine |
| * order in queued streams. |
| * |
| * @param stream the stream to schedule |
| * @param eos != 0 iff no more input will arrive |
| * @param cmp priority comparison |
| * @param ctx context for comparison |
| */ |
| apr_status_t h2_stream_schedule(h2_stream *stream, int eos, int push_enabled, |
| h2_stream_pri_cmp *cmp, void *ctx); |
| |
| /** |
| * Determine if stream has been scheduled already. |
| * @param stream the stream to check on |
| * @return != 0 iff stream has been scheduled |
| */ |
| int h2_stream_is_scheduled(const h2_stream *stream); |
| |
| /** |
| * Set the HTTP error status as response. |
| */ |
| apr_status_t h2_stream_set_error(h2_stream *stream, int http_status); |
| |
| /** |
| * Do a speculative read on the stream output to determine the |
| * amount of data that can be read. |
| * |
| * @param stream the stream to speculatively read from |
| * @param plen (in-/out) number of bytes requested and on return amount of bytes that |
| * may be read without blocking |
| * @param peos (out) != 0 iff end of stream will be reached when reading plen |
| * bytes (out value). |
| * @param presponse (out) the response of one became available |
| * @return APR_SUCCESS if out information was computed successfully. |
| * APR_EAGAIN if not data is available and end of stream has not been |
| * reached yet. |
| */ |
| apr_status_t h2_stream_out_prepare(h2_stream *stream, apr_off_t *plen, |
| int *peos, h2_headers **presponse); |
| |
| /** |
| * Read a maximum number of bytes into the bucket brigade. |
| * |
| * @param stream the stream to read from |
| * @param bb the brigade to append output to |
| * @param plen (in-/out) max. number of bytes to append and on return actual |
| * number of bytes appended to brigade |
| * @param peos (out) != 0 iff end of stream has been reached while reading |
| * @return APR_SUCCESS if out information was computed successfully. |
| * APR_EAGAIN if not data is available and end of stream has not been |
| * reached yet. |
| */ |
| apr_status_t h2_stream_read_to(h2_stream *stream, apr_bucket_brigade *bb, |
| apr_off_t *plen, int *peos); |
| |
| /** |
| * Get optional trailers for this stream, may be NULL. Meaningful |
| * results can only be expected when the end of the response body has |
| * been reached. |
| * |
| * @param stream to ask for trailers |
| * @return trailers for NULL |
| */ |
| apr_table_t *h2_stream_get_trailers(h2_stream *stream); |
| |
| /** |
| * Check if the stream has open input. |
| * @param stream the stream to check |
| * @return != 0 iff stream has open input. |
| */ |
| int h2_stream_input_is_open(const h2_stream *stream); |
| |
| /** |
| * Submit any server push promises on this stream and schedule |
| * the tasks connection with these. |
| * |
| * @param stream the stream for which to submit |
| */ |
| apr_status_t h2_stream_submit_pushes(h2_stream *stream, h2_headers *response); |
| |
| /** |
| * Get priority information set for this stream. |
| */ |
| const struct h2_priority *h2_stream_get_priority(h2_stream *stream, |
| h2_headers *response); |
| |
| /** |
| * Return a textual representation of the stream state as in RFC 7540 |
| * nomenclator, all caps, underscores. |
| */ |
| const char *h2_stream_state_str(h2_stream *stream); |
| |
| /** |
| * Determine if stream is ready for submitting a response or a RST |
| * @param stream the stream to check |
| */ |
| int h2_stream_is_ready(h2_stream *stream); |
| |
| #endif /* defined(__mod_h2__h2_stream__) */ |