docs/manual/mod/mod_headers.xml

<?xml version="1.0"?>
<!DOCTYPE modulesynopsis SYSTEM "../style/modulesynopsis.dtd">
<?xml-stylesheet type="text/xsl" href="../style/manual.en.xsl"?>
<!-- $LastChangedRevision$ -->

<!--
 Licensed to the Apache Software Foundation (ASF) under one or more
 contributor license agreements.  See the NOTICE file distributed with
 this work for additional information regarding copyright ownership.
 The ASF licenses this file to You under the Apache License, Version 2.0
 (the "License"); you may not use this file except in compliance with
 the License.  You may obtain a copy of the License at

     http://www.apache.org/licenses/LICENSE-2.0

 Unless required by applicable law or agreed to in writing, software
 distributed under the License is distributed on an "AS IS" BASIS,
 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 See the License for the specific language governing permissions and
 limitations under the License.
-->

<modulesynopsis metafile="mod_headers.xml.meta">

<name>mod_headers</name>
<description>Customization of HTTP request and response
headers</description>
<status>Extension</status>
<sourcefile>mod_headers.c</sourcefile>
<identifier>headers_module</identifier>

<summary>
    <p>This module provides directives to control and modify HTTP
    request and response headers. Headers can be merged, replaced
    or removed.</p>
</summary>

<section id="order"><title>Order of Processing</title>

    <p>The directives provided by <module>mod_headers</module> can occur
    almost anywhere within the server configuration. They are valid in the
    main server config and virtual host sections, inside
    <directive module="core" type="section">Directory</directive>,
    <directive module="core" type="section">Location</directive> and 
    <directive module="core" type="section">Files</directive> sections,
    and within <code>.htaccess</code> files.</p>

    <p>The directives are processed in the following order:</p>

    <ol>
      <li>main server</li>
      <li>virtual host</li>
      <li><directive type="section">Directory</directive> sections and
      <code>.htaccess</code></li>
      <li><directive type="section">Files</directive></li>
      <li><directive type="section">Location</directive></li>
    </ol>

    <p>Order is important. These two headers have a different
    effect if reversed:</p>

    <example>
      RequestHeader append MirrorID "mirror 12"<br />
      RequestHeader unset MirrorID
    </example>

    <p>This way round, the <code>MirrorID</code> header is not set. If
    reversed, the MirrorID header is set to "mirror 12".</p>
</section>

<section id="examples"><title>Examples</title>

    <ol>
      <li>
        Copy all request headers that begin with "TS" to the
        response headers:

        <example>
          Header echo ^TS
        </example>
      </li>

      <li>
        Add a header, <code>MyHeader</code>, to the response including a
        timestamp for when the request was received and how long it
        took to begin serving the request. This header can be used by
        the client to intuit load on the server or in isolating
        bottlenecks between the client and the server.

        <example>
          Header add MyHeader "%D %t"
        </example>

        <p>results in this header being added to the response:</p>

        <example>
          MyHeader: D=3775428 t=991424704447256
        </example>
      </li>

      <li>
        Say hello to Joe

        <example>
          Header add MyHeader "Hello Joe. It took %D microseconds \<br />
          for Apache to serve this request."
        </example>

        <p>results in this header being added to the response:</p>

        <example>
          MyHeader: Hello Joe. It took D=3775428 microseconds for Apache
          to serve this request.
        </example>
      </li>

      <li>
        Conditionally send <code>MyHeader</code> on the response if and
        only if header "MyRequestHeader" is present on the request. This
        is useful for constructing headers in response to some client
        stimulus. Note that this example requires the services of the
        <module>mod_setenvif</module> module.

        <example>
          SetEnvIf MyRequestHeader value HAVE_MyRequestHeader<br />
          Header add MyHeader "%D %t mytext" env=HAVE_MyRequestHeader<br />
       </example>

       <p>If the header <code>MyRequestHeader: value</code> is present on
       the HTTP request, the response will contain the following header:</p>

       <example>
         MyHeader: D=3775428 t=991424704447256 mytext
       </example>
      </li>
    </ol>
</section>

<directivesynopsis>
<name>RequestHeader</name>
<description>Configure HTTP request headers</description>
<syntax>RequestHeader set|append|add|unset <var>header</var>
[<var>value</var> [env=[!]<var>variable</var>]]</syntax>
<contextlist><context>server config</context><context>virtual host</context>
<context>directory</context><context>.htaccess</context></contextlist>
<override>FileInfo</override>

<usage>
    <p>This directive can replace, merge or remove HTTP request
    headers. The header is modified just before the content handler
    is run, allowing incoming headers to be modified. The action it
    performs is determined by the first argument. This can be one
    of the following values:</p>

    <dl>
    <dt><code>set</code></dt>
    <dd>The request header is set, replacing any previous header
    with this name</dd>

    <dt><code>append</code></dt>
    <dd>The request header is appended to any existing header of the
    same name. When a new value is merged onto an existing header
    it is separated from the existing header with a comma. This
    is the HTTP standard way of giving a header multiple
    values.</dd>

    <dt><code>add</code></dt>
    <dd>The request header is added to the existing set of headers,
    even if this header already exists. This can result in two
    (or more) headers having the same name. This can lead to
    unforeseen consequences, and in general <code>append</code> should be
    used instead.</dd>

    <dt><code>unset</code></dt>
    <dd>The request header of this name is removed, if it exists. If
    there are multiple headers of the same name, all will be removed.</dd>
    </dl>

    <p>This argument is followed by a header name, which can
    include the final colon, but it is not required. Case is
    ignored. For <code>add</code>, <code>append</code> and
    <code>set</code> a <var>value</var> is given as the third argument. If
    <var>value</var> contains spaces, it should be surrounded by double
    quotes. For unset, no <var>value</var> should be given.</p>

    <p>When the <directive>RequestHeader</directive> directive is used with the
    <code>add</code>, <code>append</code>, or <code>set</code>
    argument, a fourth argument may be used to specify conditions
    under which the action will be taken. If the <a
    href="../env.html">environment variable</a> specified in the
    <code>env=...</code> argument exists (or if the environment
    variable does not exist and <code>env=!...</code> is specified)
    then the action specified by the <directive>RequestHeader</directive> directive
    will take effect. Otherwise, the directive will have no effect
    on the request.</p>

    <p>The <directive>RequestHeader</directive> directive is processed
    just before the request is run by its handler in the fixup phase.
    This should allow headers generated by the browser, or by Apache
    input filters to be overridden or modified.</p>
</usage>
</directivesynopsis>

<directivesynopsis>
<name>Header</name>
<description>Configure HTTP response headers</description>
<syntax>Header [<var>condition</var>] set|append|add|unset|echo
<var>header</var> [<var>value</var>] [env=[!]<var>variable</var>]</syntax>
<contextlist><context>server config</context><context>virtual host</context>
<context>directory</context><context>.htaccess</context></contextlist>
<override>FileInfo</override>
<compatibility><var>Condition</var> is available in version 2.0.51 and
later</compatibility>

<usage>
    <p>This directive can replace, merge or remove HTTP response
    headers. The header is modified just after the content handler
    and output filters are run, allowing outgoing headers to be
    modified.</p>

    <p>The optional <var>condition</var> can be either <code>onsuccess</code>
    or <code>always</code>. It determines, which internal header table should be
    operated on. <code>onsuccess</code> stands for <code>2<var>xx</var></code>
    status codes and <code>always</code> for all status codes (including
    <code>2<var>xx</var></code>). Especially if you want to unset headers
    set by certain modules, you should try out, which table is affected.</p>

    <p>The action it performs is determined by the second
    argument. This can be one of the following values:</p>

    <dl>
    <dt><code>set</code></dt>
    <dd>The response header is set, replacing any previous header
    with this name. The <var>value</var> may be a format string.</dd>

    <dt><code>append</code></dt>
    <dd>The response header is appended to any existing header of
    the same name. When a new value is merged onto an existing
    header it is separated from the existing header with a comma.
    This is the HTTP standard way of giving a header multiple values.</dd>

    <dt><code>add</code></dt>
    <dd>The response header is added to the existing set of headers,
    even if this header already exists. This can result in two
    (or more) headers having the same name. This can lead to
    unforeseen consequences, and in general "append" should be
    used instead.</dd>

    <dt><code>unset</code></dt>
    <dd>The response header of this name is removed, if it exists.
    If there are multiple headers of the same name, all will be
    removed.</dd>

    <dt><code>echo</code></dt>
    <dd>Request headers with this name are echoed back in the
    response headers. <var>header</var> may be a regular expression.</dd>
    </dl>

    <p>This argument is followed by a <var>header</var> name, which
    can include the final colon, but it is not required. Case is
    ignored for <code>set</code>, <code>append</code>, <code>add</code>
    and <code>unset</code>. The <var>header</var> name for <code>echo</code>
    is case sensitive and may be a regular expression.</p>

    <p>For <code>add</code>, <code>append</code> and <code>set</code> a
    <var>value</var> is specified as the third argument. If <var>value</var>
    contains spaces, it should be surrounded by doublequotes.
    <var>value</var> may be a character string, a string containing format
    specifiers or a combination of both. The following format specifiers
    are supported in <var>value</var>:</p>

    <table border="1">
    <columnspec><column width=".25"/><column width=".75"/></columnspec>
    <tr><td><code>%t</code></td>
        <td>The time the request was received in Universal Coordinated Time
        since the epoch (Jan. 1, 1970) measured in microseconds. The value
        is preceded by <code>t=</code>.</td></tr>

    <tr><td><code>%D</code></td>
        <td>The time from when the request was received to the time the
        headers are sent on the wire. This is a measure of the duration
        of the request. The value is preceded by <code>D=</code>.</td></tr>

    <tr><td><code>%{FOOBAR}e</code></td>
        <td>The contents of the <a href="../env.html">environment
        variable</a> <code>FOOBAR</code>.</td></tr>
    </table>

    <p>When the <directive>Header</directive> directive is used with the
    <code>add</code>, <code>append</code>, or <code>set</code>
    argument, a fourth argument may be used to specify conditions
    under which the action will be taken. If the <a
    href="../env.html">environment variable</a> specified in the
    <code>env=...</code> argument exists (or if the environment
    variable does not exist and <code>env=!...</code> is specified)
    then the action specified by the <directive>Header</directive> directive
    will take effect. Otherwise, the directive will have no effect
    on the request.</p>

    <p>The <directive>Header</directive> directives are processed just
    before the response is sent to the network. These means that it is
    possible to set and/or override most headers, except for those headers
    added by the header filter.</p>
</usage>
</directivesynopsis>

</modulesynopsis>