<!--
$PostgreSQL: pgsql/doc/src/sgml/ref/alter_resource_queue.sgml,v 1.4.2.1 2006/10/06 13:15:10 dhutchinson Exp $
PostgreSQL documentation
-->

<refentry id="SQL-ALTERRESOURCEQUEUE">
 <refmeta>
  <refentrytitle id="sql-alterresourcequeue-title">ALTER RESOURCE QUEUE</refentrytitle>
  <refmiscinfo>SQL - Language Statements</refmiscinfo>
 </refmeta>

 <refnamediv>
  <refname>ALTER RESOURCE QUEUE</refname>
  <refpurpose>change attributes of a resource queue</refpurpose>
 </refnamediv>

 <indexterm zone="sql-alterresourcequeue">
  <primary>ALTER RESOURCE QUEUE</primary>
 </indexterm>

 <refsynopsisdiv>
<synopsis>

ALTER RESOURCE QUEUE name WITH ( queue_attribute=value [, ... ] ) 
where queue_attribute is:
   ACTIVE_STATEMENTS=integer
   MEMORY_LIMIT='memory_units'
   MAX_COST=float
   COST_OVERCOMMIT={TRUE|FALSE}
   MIN_COST=float
   PRIORITY={MIN|LOW|MEDIUM|HIGH|MAX}

ALTER RESOURCE QUEUE name WITHOUT ( queue_attribute=value [, ... ] ) 
where queue_attribute is:
   ACTIVE_STATEMENTS
   MEMORY_LIMIT
   MAX_COST
   COST_OVERCOMMIT
   MIN_COST

   Note: A resource queue must have either an ACTIVE_STATEMENTS 
   or a MAX_COST value. Do not remove both these queue_attributes 
   from a resource queue.

</synopsis>
 </refsynopsisdiv>

 <refsect1>
  <title>Description</title>

  <para>
   ALTER RESOURCE QUEUE changes the limits of a resource queue. 
   Only a superuser can alter a resource queue. A resource queue 
   must have either an ACTIVE_STATEMENTS or a MAX_COST value 
   (or it can have both). You can also set or reset priority for 
   a resource queue to control the relative share of available CPU 
   resources used by queries associated with the queue, or memory 
   limit of a resource queue to control the amount of memory that 
   all queries submitted through the queue can consume on a segment host.
  </para>

  <para>
   ALTER RESOURCE QUEUE WITHOUT removes the specified limits on 
   a resource that were previously set. A resource queue must have 
   either an ACTIVE_STATEMENTS or a MAX_COST value. Do not remove both 
   these queue_attributes from a resource queue.

  </para>

  </refsect1>

 <refsect1>
  <title>Parameters</title>

    <variablelist>
     <varlistentry>
      <term><replaceable class="parameter">name</replaceable></term>
      <listitem>
       <para>
        The name of the resource queue.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><literal>ACTIVE_STATEMENTS</literal> <replaceable class="parameter">integer</replaceable></term>
       <listitem>
       <para>
        Resource queues with an <literal>ACTIVE_STATEMENTS</literal> threshold
        limit the number of queries that can be executed by roles assigned 
        to that queue. It controls the number of active queries that are 
        allowed to run at the same time. The value for <literal>ACTIVE_STATEMENTS</literal> 
        should be an integer greater than 0, or -1. A setting of -1 means no 
        <literal>ACTIVE_STATEMENTS</literal> limit.
      </para>
      </listitem>
     </varlistentry>

<varlistentry>
      <term><literal>MEMORY_LIMIT</literal> <replaceable class="parameter">float</replaceable></term>
       <listitem>
       <para>
        Sets the total memory quota for all statements submitted from users 
        in this resource queue. Memory units can be specified in kB, MB or GB. 
        The minimum memory quota for a resource queue is 10MB. There is no maximum; 
        however the upper boundary at query execution time is limited by the physical 
        memory of a segment host. The default value is no limit (-1).
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><literal>MAX_COST</literal> <replaceable class="parameter">float</replaceable></term>
       <listitem>
       <para>
        Resource queues with a <literal>MAX_COST</literal> limit the total cost of 
        queries that can be executed by roles assigned to that queue. Cost 
        is measured in the estimated total cost for the query as determined 
        by the query planner (as shown in the <command>EXPLAIN</command> output for a query). 
        Therefore, an administrator must be familiar with the queries typically 
        executed on the system in order to set an appropriate cost threshold for 
        a queue. Cost is measured in units of disk page fetches; 1.0 equals one 
        sequential disk page read. The value for <literal>MAX_COST</literal> 
        is specified as a floating point number (for example 100.0) or can also be 
        specified as an exponent (for example 1e+2). A value of -1.0 means no
        <literal>MAX_COST</literal> limit.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><literal>MIN_COST</literal> <replaceable class="parameter">float</replaceable></term>
       <listitem>
       <para>
        If a Resource queue has <literal>MIN_COST</literal> &gt; 0 
        any query whose cost is &lt; this value s not queued i.e it is ignored
        for resource scheduling purposes.
       </para>

       <para>
        A value of 0.0 means all no queries are ignored. This is the default.
       </para>
      </listitem>
     </varlistentry>

     <varlistentry>
      <term><literal>COST_OVERCOMMIT</literal></term>
       <listitem>
       <para>
       These clauses determine whether the <literal>resource queue</literal>
       will allow statements whose potential <literal>cost</literal> is 
       larger than the queue's <literal>costlimit</literal> to execute.
       </para>
       <para>
       In the default <literal>COST_OVERCOMMIT=FALSE</literal> case, such statements
       produce an error. If <literal>COST_OVERCOMMIT</literal> is enabled for the 
       queue, then they will be allowed to run when there are no other
       statements in the queue.
       </para>
       </listitem>
     </varlistentry>

     </variablelist>
 </refsect1> 

 <refsect1>
  <title>Notes</title>
  <para>
   To enable the resource scheduling and workload management feature,
   you must set the <literal>postgresql.conf</literal> parameter 
   <literal>resource_scheduler</literal> to <literal>on</literal>.
  </para>

  <para>
   The <literal>threshold</literal> changes are effective immediately. 
   However, alterations to a <literal>resource queue</literal> that is in use 
   are not permitted.
  </para>


  <para>
   Use <xref linkend="SQL-CREATERESOURCEQUEUE" endterm="SQL-CREATERESOURCEQUEUE-title"> to
   create a new resource queue, and <xref linkend="SQL-DROPRESOURCEQUEUE"
   endterm="SQL-DROPRESOURCEQUEUE-title"> to remove a resource queue.  
  </para>

  <para>
   Use <xref linkend="SQL-ALTERROLE" endterm="SQL-ALTERROLE-title"> 
   to add or remove users from a resource queue.  
  </para>

  <para>
   Use the <literal>pg_resqueue</literal> system catalog table to look up 
   information about an existing resource queue.  
  </para>


   </refsect1>

 <refsect1>
  <title>Examples</title>

  <para>
   Set a resource queue's active query limit to 20:
<programlisting>
ALTER RESOURCE QUEUE myqueue WITH (ACTIVE_STATEMENTS=20);
</programlisting>
  </para>

  <para>
   Set a resource queue's query cost limit to 3000.0:
<programlisting>
ALTER RESOURCE QUEUE webusers WITH (COSTLIMIT=3000.0);
</programlisting>
  </para>

  <para>
   Clear the query cost limit on a resource queue (no cost limit):

<programlisting>
ALTER RESOURCE QUEUE powerusers WITH (COSTLIMIT=-1.0);
</programlisting>
  </para>

  <para> 
   Change both the active query and cost limits for a resource queue:
<programlisting>
ALTER RESOURCE QUEUE myqueue WITH (ACTIVE_STATEMENTS=30, MAX_COST=5000.00);
</programlisting>
  </para>

  <para>
   Remove the MAX_COST and MEMORY_LIMIT limits from a resource queue:
<programlisting>
ALTER RESOURCE QUEUE myqueue WITHOUT (MAX_COST, MEMORY_LIMIT);
</programlisting>
  </para>


 </refsect1>
 
 <refsect1>
  <title>Compatibility</title>

  <para>
   There is no <command>ALTER RESOURCE QUEUE</command> in the SQL standard.
   Resource scheduling is a feature of Bizgres and Greenplum Database.
  </para>
   </refsect1>

 <refsect1>
  <title>See Also</title>

  <simplelist type="inline">
   <member><xref linkend="sql-createrole" endterm="sql-createrole-title"></member>
   <member><xref linkend="sql-alterrole" endterm="sql-alterrole-title"></member>
   <member><xref linkend="sql-createresourcequeue" endterm="sql-createresourcequeue-title"></member>
   <member><xref linkend="sql-dropresourcequeue" endterm="sql-dropresourcequeue-title"></member>
     </simplelist>
 </refsect1>
</refentry>

<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-omittag:nil
sgml-shorttag:t
sgml-minimize-attributes:nil
sgml-always-quote-attributes:t
sgml-indent-step:1
sgml-indent-data:t
sgml-parent-document:nil
sgml-default-dtd-file:"../reference.ced"
sgml-exposed-tags:nil
sgml-local-catalogs:"/usr/lib/sgml/catalog"
sgml-local-ecat-files:nil
End:
-->