/*-------------------------------------------------------------------------
 *
 * pqcomm.c
 *	  Communication functions between the Frontend and the Backend
 *
 * These routines handle the low-level details of communication between
 * frontend and backend.  They just shove data across the communication
 * channel, and are ignorant of the semantics of the data --- or would be,
 * except for major brain damage in the design of the old COPY OUT protocol.
 * Unfortunately, COPY OUT was designed to commandeer the communication
 * channel (it just transfers data without wrapping it into messages).
 * No other messages can be sent while COPY OUT is in progress; and if the
 * copy is aborted by an ereport(ERROR), we need to close out the copy so that
 * the frontend gets back into sync.  Therefore, these routines have to be
 * aware of COPY OUT state.  (New COPY-OUT is message-based and does *not*
 * set the DoingCopyOut flag.)
 *
 * NOTE: generally, it's a bad idea to emit outgoing messages directly with
 * pq_putbytes(), especially if the message would require multiple calls
 * to send.  Instead, use the routines in pqformat.c to construct the message
 * in a buffer and then emit it in one call to pq_putmessage.  This ensures
 * that the channel will not be clogged by an incomplete message if execution
 * is aborted by ereport(ERROR) partway through the message.  The only
 * non-libpq code that should call pq_putbytes directly is old-style COPY OUT.
 *
 * At one time, libpq was shared between frontend and backend, but now
 * the backend's "backend/libpq" is quite separate from "interfaces/libpq".
 * All that remains is similarities of names to trap the unwary...
 *
 * Portions Copyright (c) 1996-2010, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *	$PostgreSQL: pgsql/src/backend/libpq/pqcomm.c,v 1.212 2010/07/08 16:19:50 mha Exp $
 *
 *-------------------------------------------------------------------------
 */

/*------------------------
 * INTERFACE ROUTINES
 *
 * setup/teardown:
 *		StreamServerPort	- Open postmaster's server port
 *		StreamConnection	- Create new connection with client
 *		StreamClose			- Close a client/backend connection
 *		TouchSocketFile		- Protect socket file against /tmp cleaners
 *		pq_init			- initialize libpq at backend startup
 *		pq_comm_reset	- reset libpq during error recovery
 *		pq_close		- shutdown libpq at backend exit
 *
 * low-level I/O:
 *		pq_getbytes		- get a known number of bytes from connection
 *		pq_getstring	- get a null terminated string from connection
 *		pq_getmessage	- get a message with length word from connection
 *		pq_getbyte		- get next byte from connection
 *		pq_peekbyte		- peek at next byte from connection
 *		pq_putbytes		- send bytes to connection (not flushed until pq_flush)
 *		pq_flush		- flush pending output
 *		pq_getbyte_if_available - get a byte if available without blocking
 *
 * message-level I/O (and old-style-COPY-OUT cruft):
 *		pq_putmessage	- send a normal message (suppressed in COPY OUT mode)
 *		pq_startcopyout - inform libpq that a COPY OUT transfer is beginning
 *		pq_endcopyout	- end a COPY OUT transfer
 *
 *------------------------
 */
#include "postgres.h"
#include <pthread.h>

#include <signal.h>
#include <fcntl.h>
#include <grp.h>
#include <unistd.h>
#include <sys/file.h>
#include <sys/socket.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <netdb.h>
#include <netinet/in.h>
#ifdef HAVE_NETINET_TCP_H
#include <netinet/tcp.h>
#endif
#include <arpa/inet.h>
#ifdef HAVE_UTIME_H
#include <utime.h>
#endif
#ifdef WIN32_ONLY_COMPILER /* mstcpip.h is missing on mingw */
#include <mstcpip.h>
#endif

#include "libpq/ip.h"
#include "libpq/libpq.h"
#include "miscadmin.h"
#include "storage/ipc.h"
#include "utils/guc.h"
#include "cdb/cdbvars.h"
#include "tcop/tcopprot.h"

/*
 * Configuration options
 */
int			Unix_socket_permissions;
char	   *Unix_socket_group;


/* Where the Unix socket file is */
static char sock_path[MAXPGPATH];


/*
 * Buffers for low-level I/O
 */

#define PQ_BUFFER_SIZE 8192

static char PqSendBuffer[PQ_BUFFER_SIZE];
static int	PqSendPointer;		/* Next index to store a byte in PqSendBuffer */

static char PqRecvBuffer[PQ_BUFFER_SIZE];
static int	PqRecvPointer;		/* Next index to read a byte from PqRecvBuffer */
static int	PqRecvLength;		/* End of data available in PqRecvBuffer */

static pthread_mutex_t send_mutex = PTHREAD_MUTEX_INITIALIZER;

/*
 * Message status
 */
/* XXX This flag is used by frontend protocal 1 and 2 only.  That is 
 * VERY OLD (We should be on Protocol 3).
 */
static bool DoingCopyOut;

/* Internal functions */
static void pq_close(int code, Datum arg);
static int	internal_putbytes(const char *s, size_t len);
static int	internal_flush(void);
static void pq_set_nonblocking(bool nonblocking);
static bool pq_send_mutex_lock();

#ifdef HAVE_UNIX_SOCKETS
static int	Lock_AF_UNIX(unsigned short portNumber, char *unixSocketName);
static int	Setup_AF_UNIX(void);
#endif   /* HAVE_UNIX_SOCKETS */


/* --------------------------------
 *		pq_init - initialize libpq at backend startup
 * --------------------------------
 */
void
pq_init(void)
{
	PqSendPointer = PqRecvPointer = PqRecvLength = 0;
	DoingCopyOut = false;
	on_proc_exit(pq_close, 0);
}

/* --------------------------------
 *		pq_comm_reset - reset libpq during error recovery
 *
 * This is called from error recovery at the outer idle loop.  It's
 * just to get us out of trouble if we somehow manage to elog() from
 * inside a pqcomm.c routine (which ideally will never happen, but...)
 * --------------------------------
 */
void
pq_comm_reset(void)
{
	/* We can abort any old-style COPY OUT, too */
	pq_endcopyout(true);
}

/* --------------------------------
 *		pq_close - shutdown libpq at backend exit
 *
 * Note: in a standalone backend MyProcPort will be null,
 * don't crash during exit...
 * --------------------------------
 */
static void
pq_close(int code, Datum arg)
{
	if (MyProcPort != NULL)
	{
#if defined(ENABLE_GSS) || defined(ENABLE_SSPI)
#ifdef ENABLE_GSS
		OM_uint32	min_s;

		/* Shutdown GSSAPI layer */
		if (MyProcPort->gss->ctx != GSS_C_NO_CONTEXT)
			gss_delete_sec_context(&min_s, &MyProcPort->gss->ctx, NULL);

		if (MyProcPort->gss->cred != GSS_C_NO_CREDENTIAL)
			gss_release_cred(&min_s, &MyProcPort->gss->cred);
#endif   /* ENABLE_GSS */
		/* GSS and SSPI share the port->gss struct */

		free(MyProcPort->gss);
#endif   /* ENABLE_GSS || ENABLE_SSPI */

		/* Cleanly shut down SSL layer */
		secure_close(MyProcPort);

		/*
		 * Formerly we did an explicit close() here, but it seems better to
		 * leave the socket open until the process dies.  This allows clients
		 * to perform a "synchronous close" if they care --- wait till the
		 * transport layer reports connection closure, and you can be sure the
		 * backend has exited.
		 *
		 * We do set sock to PGINVALID_SOCKET to prevent any further I/O,
		 * though.
		 */
		MyProcPort->sock = PGINVALID_SOCKET;
	}
}

/* --------------------------------
 *		pq_comm_close_fatal - shutdown libpq at backend fatal error exit
 * --------------------------------
 */
void
pq_comm_close_fatal(void)
{
	if (MyProcPort != NULL)
	{
		/* Cleanly shut down SSL layer */
		secure_close(MyProcPort);

		if (MyProcPort->sock >= 0)
            closesocket(MyProcPort->sock);
        
		MyProcPort->sock = -1;
	}
}                               /* pq_comm_close_fatal */


/*
 * Streams -- wrapper around Unix socket system calls
 *
 *
 *		Stream functions are used for vanilla TCP connection protocol.
 */


/* StreamDoUnlink()
 * Shutdown routine for backend connection
 * If a Unix socket is used for communication, explicitly close it.
 */
#ifdef HAVE_UNIX_SOCKETS
static void
StreamDoUnlink(int code, Datum arg)
{
	Assert(sock_path[0]);
	unlink(sock_path);
}
#endif   /* HAVE_UNIX_SOCKETS */

/*
 * StreamServerPort -- open a "listening" port to accept connections.
 *
 * Successfully opened sockets are added to the ListenSocket[] array,
 * at the first position that isn't PGINVALID_SOCKET.
 *
 * RETURNS: STATUS_OK or STATUS_ERROR
 */

int
StreamServerPort(int family, char *hostName, unsigned short portNumber,
				 char *unixSocketName,
				 pgsocket ListenSocket[], int MaxListen)
{
	pgsocket	fd;
	int			err;
	int			maxconn;
	int			ret;
	char		portNumberStr[32];
	const char *familyDesc;
	char		familyDescBuf[64];
	char	   *service;
	struct addrinfo *addrs = NULL,
			   *addr;
	struct addrinfo hint;
	int			listen_index = 0;
	int			added = 0;

#if !defined(WIN32) || defined(IPV6_V6ONLY)
	int			one = 1;
#endif

	/* Initialize hint structure */
	MemSet(&hint, 0, sizeof(hint));
	hint.ai_family = family;
	hint.ai_flags = AI_PASSIVE;
	hint.ai_socktype = SOCK_STREAM;

#ifdef HAVE_UNIX_SOCKETS
	if (family == AF_UNIX)
	{
		/* Lock_AF_UNIX will also fill in sock_path. */
		if (Lock_AF_UNIX(portNumber, unixSocketName) != STATUS_OK)
			return STATUS_ERROR;
		service = sock_path;
	}
	else
#endif   /* HAVE_UNIX_SOCKETS */
	{
		snprintf(portNumberStr, sizeof(portNumberStr), "%d", portNumber);
		service = portNumberStr;
	}

	ret = pg_getaddrinfo_all(hostName, service, &hint, &addrs);
	if (ret || !addrs)
	{
		if (hostName)
			ereport(LOG,
					(errmsg("could not translate host name \"%s\", service \"%s\" to address: %s",
							hostName, service, gai_strerror(ret))));
		else
			ereport(LOG,
				 (errmsg("could not translate service \"%s\" to address: %s",
						 service, gai_strerror(ret))));
		if (addrs)
			pg_freeaddrinfo_all(hint.ai_family, addrs);
		return STATUS_ERROR;
	}

	for (addr = addrs; addr; addr = addr->ai_next)
	{
		if (!IS_AF_UNIX(family) && IS_AF_UNIX(addr->ai_family))
		{
			/*
			 * Only set up a unix domain socket when they really asked for it.
			 * The service/port is different in that case.
			 */
			continue;
		}

		/* See if there is still room to add 1 more socket. */
		for (; listen_index < MaxListen; listen_index++)
		{
			if (ListenSocket[listen_index] == PGINVALID_SOCKET)
				break;
		}
		if (listen_index >= MaxListen)
		{
			ereport(LOG,
					(errmsg("could not bind to all requested addresses: MAXLISTEN (%d) exceeded",
							MaxListen)));
			break;
		}

		/* set up family name for possible error messages */
		switch (addr->ai_family)
		{
			case AF_INET:
				familyDesc = _("IPv4");
				break;
#ifdef HAVE_IPV6
			case AF_INET6:
				familyDesc = _("IPv6");
				break;
#endif
#ifdef HAVE_UNIX_SOCKETS
			case AF_UNIX:
				familyDesc = _("Unix");
				break;
#endif
			default:
				snprintf(familyDescBuf, sizeof(familyDescBuf),
						 _("unrecognized address family %d"),
						 addr->ai_family);
				familyDesc = familyDescBuf;
				break;
		}

		if ((fd = socket(addr->ai_family, SOCK_STREAM, 0)) < 0)
		{
			ereport(LOG,
					(errcode_for_socket_access(),
			/* translator: %s is IPv4, IPv6, or Unix */
					 errmsg("could not create %s socket: %m",
							familyDesc)));
			continue;
		}

#ifndef WIN32

		/*
		 * Without the SO_REUSEADDR flag, a new postmaster can't be started
		 * right away after a stop or crash, giving "address already in use"
		 * error on TCP ports.
		 *
		 * On win32, however, this behavior only happens if the
		 * SO_EXLUSIVEADDRUSE is set. With SO_REUSEADDR, win32 allows multiple
		 * servers to listen on the same address, resulting in unpredictable
		 * behavior. With no flags at all, win32 behaves as Unix with
		 * SO_REUSEADDR.
		 */
		if (!IS_AF_UNIX(addr->ai_family))
		{
			if ((setsockopt(fd, SOL_SOCKET, SO_REUSEADDR,
							(char *) &one, sizeof(one))) == -1)
			{
				ereport(LOG,
						(errcode_for_socket_access(),
						 errmsg("setsockopt(SO_REUSEADDR) failed: %m")));
				closesocket(fd);
				continue;
			}
		}
#endif

#ifdef IPV6_V6ONLY
		if (addr->ai_family == AF_INET6)
		{
			if (setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY,
						   (char *) &one, sizeof(one)) == -1)
			{
				ereport(LOG,
						(errcode_for_socket_access(),
						 errmsg("setsockopt(IPV6_V6ONLY) failed: %m")));
				closesocket(fd);
				continue;
			}
		}
#endif

		/*
		 * Note: This might fail on some OS's, like Linux older than
		 * 2.4.21-pre3, that don't have the IPV6_V6ONLY socket option, and map
		 * ipv4 addresses to ipv6.	It will show ::ffff:ipv4 for all ipv4
		 * connections.
		 */
		err = bind(fd, addr->ai_addr, addr->ai_addrlen);
		if (err < 0)
		{
			ereport(LOG,
					(errcode_for_socket_access(),
			/* translator: %s is IPv4, IPv6, or Unix */
					 errmsg("could not bind %s socket: %m",
							familyDesc),
					 (IS_AF_UNIX(addr->ai_family)) ?
				  errhint("Is another postmaster already running on port %d?"
						  " If not, remove socket file \"%s\" and retry.",
						  (int) portNumber, sock_path) :
				  errhint("Is another postmaster already running on port %d?"
						  " If not, wait a few seconds and retry.",
						  (int) portNumber)));
			closesocket(fd);
			continue;
		}

#ifdef HAVE_UNIX_SOCKETS
		if (addr->ai_family == AF_UNIX)
		{
			if (Setup_AF_UNIX() != STATUS_OK)
			{
				closesocket(fd);
				break;
			}
		}
#endif

		/*
		 * Select appropriate accept-queue length limit.  PG_SOMAXCONN is only
		 * intended to provide a clamp on the request on platforms where an
		 * overly large request provokes a kernel error (are there any?).
		 */
		maxconn = MaxBackends * 2;
		if (maxconn > PG_SOMAXCONN)
			maxconn = PG_SOMAXCONN;

		err = listen(fd, maxconn);
		if (err < 0)
		{
			ereport(LOG,
					(errcode_for_socket_access(),
			/* translator: %s is IPv4, IPv6, or Unix */
					 errmsg("could not listen on %s socket: %m",
							familyDesc)));
			closesocket(fd);
			continue;
		}
		ListenSocket[listen_index] = fd;
		added++;
	}

	pg_freeaddrinfo_all(hint.ai_family, addrs);

	if (!added)
		return STATUS_ERROR;

	return STATUS_OK;
}


#ifdef HAVE_UNIX_SOCKETS

/*
 * Lock_AF_UNIX -- configure unix socket file path
 */
static int
Lock_AF_UNIX(unsigned short portNumber, char *unixSocketName)
{
	UNIXSOCK_PATH(sock_path, portNumber, unixSocketName);

	/*
	 * Grab an interlock file associated with the socket file.
	 *
	 * Note: there are two reasons for using a socket lock file, rather than
	 * trying to interlock directly on the socket itself.  First, it's a lot
	 * more portable, and second, it lets us remove any pre-existing socket
	 * file without race conditions.
	 */
	CreateSocketLockFile(sock_path, true);

	/*
	 * Once we have the interlock, we can safely delete any pre-existing
	 * socket file to avoid failure at bind() time.
	 */
	unlink(sock_path);

	return STATUS_OK;
}


/*
 * Setup_AF_UNIX -- configure unix socket permissions
 */
static int
Setup_AF_UNIX(void)
{
	/* Arrange to unlink the socket file at exit */
	on_proc_exit(StreamDoUnlink, 0);

	/*
	 * Fix socket ownership/permission if requested.  Note we must do this
	 * before we listen() to avoid a window where unwanted connections could
	 * get accepted.
	 */
	Assert(Unix_socket_group);
	if (Unix_socket_group[0] != '\0')
	{
#ifdef WIN32
		elog(WARNING, "configuration item unix_socket_group is not supported on this platform");
#else
		char	   *endptr;
		unsigned long val;
		gid_t		gid;

		val = strtoul(Unix_socket_group, &endptr, 10);
		if (*endptr == '\0')
		{						/* numeric group id */
			gid = val;
		}
		else
		{						/* convert group name to id */
			struct group *gr;

			gr = getgrnam(Unix_socket_group);
			if (!gr)
			{
				ereport(LOG,
						(errmsg("group \"%s\" does not exist",
								Unix_socket_group)));
				return STATUS_ERROR;
			}
			gid = gr->gr_gid;
		}
		if (chown(sock_path, -1, gid) == -1)
		{
			ereport(LOG,
					(errcode_for_file_access(),
					 errmsg("could not set group of file \"%s\": %m",
							sock_path)));
			return STATUS_ERROR;
		}
#endif
	}

	if (chmod(sock_path, Unix_socket_permissions) == -1)
	{
		ereport(LOG,
				(errcode_for_file_access(),
				 errmsg("could not set permissions of file \"%s\": %m",
						sock_path)));
		return STATUS_ERROR;
	}
	return STATUS_OK;
}
#endif   /* HAVE_UNIX_SOCKETS */


/*
 * StreamConnection -- create a new connection with client using
 *		server port.  Set port->sock to the FD of the new connection.
 *
 * ASSUME: that this doesn't need to be non-blocking because
 *		the Postmaster uses select() to tell when the server master
 *		socket is ready for accept().
 *
 * RETURNS: STATUS_OK or STATUS_ERROR
 */
int
StreamConnection(pgsocket server_fd, Port *port)
{
	/* accept connection and fill in the client (remote) address */
	port->raddr.salen = sizeof(port->raddr.addr);
	if ((port->sock = accept(server_fd,
							 (struct sockaddr *) & port->raddr.addr,
							 &port->raddr.salen)) < 0)
	{
		ereport(LOG,
				(errcode_for_socket_access(),
				 errmsg("could not accept new connection: %m")));

		/*
		 * If accept() fails then postmaster.c will still see the server
		 * socket as read-ready, and will immediately try again.  To avoid
		 * uselessly sucking lots of CPU, delay a bit before trying again.
		 * (The most likely reason for failure is being out of kernel file
		 * table slots; we can do little except hope some will get freed up.)
		 */
		pg_usleep(100000L);		/* wait 0.1 sec */
		return STATUS_ERROR;
	}

#ifdef SCO_ACCEPT_BUG

	/*
	 * UnixWare 7+ and OpenServer 5.0.4 are known to have this bug, but it
	 * shouldn't hurt to catch it for all versions of those platforms.
	 */
	if (port->raddr.addr.ss_family == 0)
		port->raddr.addr.ss_family = AF_UNIX;
#endif

	/* fill in the server (local) address */
	port->laddr.salen = sizeof(port->laddr.addr);
	if (getsockname(port->sock,
					(struct sockaddr *) & port->laddr.addr,
					&port->laddr.salen) < 0)
	{
		elog(LOG, "getsockname() failed: %m");
		return STATUS_ERROR;
	}

	/* select NODELAY and KEEPALIVE options if it's a TCP connection */
	if (!IS_AF_UNIX(port->laddr.addr.ss_family))
	{
		int			on;

#ifdef	TCP_NODELAY
		on = 1;
		if (setsockopt(port->sock, IPPROTO_TCP, TCP_NODELAY,
					   (char *) &on, sizeof(on)) < 0)
		{
			elog(LOG, "setsockopt(TCP_NODELAY) failed: %m");
			return STATUS_ERROR;
		}
#endif
		on = 1;
		if (setsockopt(port->sock, SOL_SOCKET, SO_KEEPALIVE,
					   (char *) &on, sizeof(on)) < 0)
		{
			elog(LOG, "setsockopt(SO_KEEPALIVE) failed: %m");
			return STATUS_ERROR;
		}

#ifdef WIN32

		/*
		 * This is a Win32 socket optimization.  The ideal size is 32k.
		 * http://support.microsoft.com/kb/823764/EN-US/
		 */
		on = PQ_BUFFER_SIZE * 4;
		if (setsockopt(port->sock, SOL_SOCKET, SO_SNDBUF, (char *) &on,
					   sizeof(on)) < 0)
		{
			elog(LOG, "setsockopt(SO_SNDBUF) failed: %m");
			return STATUS_ERROR;
		}
#endif

		/*
		 * Also apply the current keepalive parameters.  If we fail to set a
		 * parameter, don't error out, because these aren't universally
		 * supported.  (Note: you might think we need to reset the GUC
		 * variables to 0 in such a case, but it's not necessary because the
		 * show hooks for these variables report the truth anyway.)
		 */
		(void) pq_setkeepalivesidle(tcp_keepalives_idle, port);
		(void) pq_setkeepalivesinterval(tcp_keepalives_interval, port);
		(void) pq_setkeepalivescount(tcp_keepalives_count, port);
	}

	return STATUS_OK;
}

/*
 * StreamClose -- close a client/backend connection
 *
 * NOTE: this is NOT used to terminate a session; it is just used to release
 * the file descriptor in a process that should no longer have the socket
 * open.  (For example, the postmaster calls this after passing ownership
 * of the connection to a child process.)  It is expected that someone else
 * still has the socket open.  So, we only want to close the descriptor,
 * we do NOT want to send anything to the far end.
 */
void
StreamClose(pgsocket sock)
{
	closesocket(sock);
}

/*
 * TouchSocketFile -- mark socket file as recently accessed
 *
 * This routine should be called every so often to ensure that the socket
 * file has a recent mod date (ordinary operations on sockets usually won't
 * change the mod date).  That saves it from being removed by
 * overenthusiastic /tmp-directory-cleaner daemons.  (Another reason we should
 * never have put the socket file in /tmp...)
 */
void
TouchSocketFile(void)
{
	/* Do nothing if we did not create a socket... */
	if (sock_path[0] != '\0')
	{
		/*
		 * utime() is POSIX standard, utimes() is a common alternative. If we
		 * have neither, there's no way to affect the mod or access time of
		 * the socket :-(
		 *
		 * In either path, we ignore errors; there's no point in complaining.
		 */
#ifdef HAVE_UTIME
		utime(sock_path, NULL);
#else							/* !HAVE_UTIME */
#ifdef HAVE_UTIMES
		utimes(sock_path, NULL);
#endif   /* HAVE_UTIMES */
#endif   /* HAVE_UTIME */
	}
}


/* --------------------------------
 * Low-level I/O routines begin here.
 *
 * These routines communicate with a frontend client across a connection
 * already established by the preceding routines.
 * --------------------------------
 */

/* --------------------------------
 *			  pq_set_nonblocking - set socket blocking/non-blocking
 *
 * Sets the socket non-blocking if nonblocking is TRUE, or sets it
 * blocking otherwise.
 * --------------------------------
 */
static void
pq_set_nonblocking(bool nonblocking)
{
	if (MyProcPort->noblock == nonblocking)
		return;

#ifdef WIN32
	pgwin32_noblock = nonblocking ? 1 : 0;
#else

	/*
	 * Use COMMERROR on failure, because ERROR would try to send the error to
	 * the client, which might require changing the mode again, leading to
	 * infinite recursion.
	 */
	if (nonblocking)
	{
		if (!pg_set_noblock(MyProcPort->sock))
			ereport(COMMERROR,
				  (errmsg("could not set socket to non-blocking mode: %m")));
	}
	else
	{
		if (!pg_set_block(MyProcPort->sock))
			ereport(COMMERROR,
					(errmsg("could not set socket to blocking mode: %m")));
	}
#endif
	MyProcPort->noblock = nonblocking;
}

/* --------------------------------
 *		pq_recvbuf - load some bytes into the input buffer
 *
 *		returns 0 if OK, EOF if trouble
 * --------------------------------
 */
static int
pq_recvbuf(void)
{
	if (PqRecvPointer > 0)
	{
		if (PqRecvLength > PqRecvPointer)
		{
			/* still some unread data, left-justify it in the buffer */
			memmove(PqRecvBuffer, PqRecvBuffer + PqRecvPointer,
					PqRecvLength - PqRecvPointer);
			PqRecvLength -= PqRecvPointer;
			PqRecvPointer = 0;
		}
		else
			PqRecvLength = PqRecvPointer = 0;
	}

	/* Can fill buffer from PqRecvLength and upwards */
	for (;;)
	{
		int			r;

		r = secure_read(MyProcPort, PqRecvBuffer + PqRecvLength,
						PQ_BUFFER_SIZE - PqRecvLength);

		if (r < 0)
		{
			if (errno == EINTR || errno == EAGAIN)
			{
				/* TODO: This is a good place to do failover. */
				continue;		/* Ok if interrupted or timeout expired */
			}

			/*
			 * Careful: an ereport() that tries to write to the client would
			 * cause recursion to here, leading to stack overflow and core
			 * dump!  This message must go *only* to the postmaster log.
			 */
			ereport(COMMERROR,
					(errcode_for_socket_access(),
					 errmsg("could not receive data from client: %m")));
			return EOF;
		}
		if (r == 0)
		{
			/*
			 * EOF detected.  We used to write a log message here, but it's
			 * better to expect the ultimate caller to do that.
			 */
			return EOF;
		}
		/* r contains number of bytes read, so just incr length */
		PqRecvLength += r;
		return 0;
	}
}

/**
 *
 * Can only be called for non-SSL connections (such as file replication connections).
 *
 * Wait for at least one byte of data to be available, or for the
 *   socket to be in error.
 *
 * return true if we have data or a socket error, false if the function
 *   call was interrupted
 */
bool
pq_waitForDataUsingSelect(void)
{
	if ( PqRecvPointer < PqRecvLength)
	{
		/* we already have data in the buffer ... so done */
		return true;
	}

#ifdef USE_SSL
	if ( MyProcPort->ssl )
	{
		elog(ERROR, "SSL connection cannot be used with pq_waitForDataUsingSelect");
		return true; /* unreachable */
	}
	else
#endif
	{
		int sock = MyProcPort->sock;
		for ( ;; )
		{
			fd_set toRead;
			fd_set haveError;
			int numSockets;

			FD_ZERO(&toRead);
			FD_ZERO(&haveError);

			FD_SET(sock, &toRead);
			FD_SET(sock, &haveError);

			errno = 0;
			numSockets = select(sock+1, &toRead, NULL /* toWrite */, &haveError, NULL );

			if ( errno == EINTR)
			{
				return false;
			}
			else if (errno != 0 )
			{
				elog(FATAL, "select failed: %m");
			}
			else if ( numSockets > 0 )
			{
				/* the socket has data to read or is in error so break out */
				return true;
			}
		}
	}
}

/* --------------------------------
 *		pq_getbyte	- get a single byte from connection, or return EOF
 * --------------------------------
 */
int
pq_getbyte(void)
{
	while (PqRecvPointer >= PqRecvLength)
	{
		if (pq_recvbuf())		/* If nothing in buffer, then recv some */
			return EOF;			/* Failed to recv data */
	}
	return (unsigned char) PqRecvBuffer[PqRecvPointer++];
}

/* --------------------------------
 *		pq_peekbyte		- peek at next byte from connection
 *
 *	 Same as pq_getbyte() except we don't advance the pointer.
 * --------------------------------
 */
int
pq_peekbyte(void)
{
	while (PqRecvPointer >= PqRecvLength)
	{
		if (pq_recvbuf())		/* If nothing in buffer, then recv some */
			return EOF;			/* Failed to recv data */
	}
	return (unsigned char) PqRecvBuffer[PqRecvPointer];
}


/* --------------------------------
 *		pq_getbyte_if_available - get a single byte from connection,
 *			if available
 *
 * The received byte is stored in *c. Returns 1 if a byte was read,
 * 0 if no data was available, or EOF if trouble.
 * --------------------------------
 */
int
pq_getbyte_if_available(unsigned char *c)
{
	int			r;

	if (PqRecvPointer < PqRecvLength)
	{
		*c = PqRecvBuffer[PqRecvPointer++];
		return 1;
	}

	/* Temporarily put the socket into non-blocking mode */
#ifdef WIN32
	pgwin32_noblock = 1;
#else
	if (!pg_set_noblock(MyProcPort->sock))
		ereport(ERROR,
				(errmsg("could not set socket to non-blocking mode: %m")));
#endif
	MyProcPort->noblock = true;
	PG_TRY();
	{
		r = secure_read(MyProcPort, c, 1);
		if (r < 0)
		{
			/*
			 * Ok if no data available without blocking or interrupted (though
			 * EINTR really shouldn't happen with a non-blocking socket).
			 * Report other errors.
			 */
			if (errno == EAGAIN || errno == EWOULDBLOCK || errno == EINTR)
				r = 0;
			else
			{
				/*
				 * Careful: an ereport() that tries to write to the client
				 * would cause recursion to here, leading to stack overflow
				 * and core dump!  This message must go *only* to the
				 * postmaster log.
				 */
				ereport(COMMERROR,
						(errcode_for_socket_access(),
						 errmsg("could not receive data from client: %m")));
				r = EOF;
			}
		}
		else if (r == 0)
		{
			/* EOF detected */
			r = EOF;
		}
	}
	PG_CATCH();
	{
		/*
		 * The rest of the backend code assumes the socket is in blocking
		 * mode, so treat failure as FATAL.
		 */
#ifdef WIN32
		pgwin32_noblock = 0;
#else
		if (!pg_set_block(MyProcPort->sock))
			ereport(FATAL,
					(errmsg("could not set socket to blocking mode: %m")));
#endif
		MyProcPort->noblock = false;
		PG_RE_THROW();
	}
	PG_END_TRY();
#ifdef WIN32
	pgwin32_noblock = 0;
#else
	if (!pg_set_block(MyProcPort->sock))
		ereport(FATAL,
				(errmsg("could not set socket to blocking mode: %m")));
#endif
	MyProcPort->noblock = false;

	return r;
}

/* --------------------------------
 *		pq_getbytes		- get a known number of bytes from connection
 *
 *		returns 0 if OK, EOF if trouble
 * --------------------------------
 */
int
pq_getbytes(char *s, size_t len)
{
	size_t		amount;

	while (len > 0)
	{
		while (PqRecvPointer >= PqRecvLength)
		{
			if (pq_recvbuf())	/* If nothing in buffer, then recv some */
				return EOF;		/* Failed to recv data */
		}
		amount = PqRecvLength - PqRecvPointer;
		if (amount > len)
			amount = len;
		memcpy(s, PqRecvBuffer + PqRecvPointer, amount);
		PqRecvPointer += amount;
		s += amount;
		len -= amount;
	}
	return 0;
}

/* --------------------------------
 *		pq_discardbytes		- throw away a known number of bytes
 *
 *		same as pq_getbytes except we do not copy the data to anyplace.
 *		this is used for resynchronizing after read errors.
 *
 *		returns 0 if OK, EOF if trouble
 * --------------------------------
 */
static int
pq_discardbytes(size_t len)
{
	size_t		amount;

	while (len > 0)
	{
		while (PqRecvPointer >= PqRecvLength)
		{
			if (pq_recvbuf())	/* If nothing in buffer, then recv some */
				return EOF;		/* Failed to recv data */
		}
		amount = PqRecvLength - PqRecvPointer;
		if (amount > len)
			amount = len;
		PqRecvPointer += amount;
		len -= amount;
	}
	return 0;
}

/* --------------------------------
 *		pq_getstring	- get a null terminated string from connection
 *
 *		The return value is placed in an expansible StringInfo, which has
 *		already been initialized by the caller.
 *
 *		This is used only for dealing with old-protocol clients.  The idea
 *		is to produce a StringInfo that looks the same as we would get from
 *		pq_getmessage() with a newer client; we will then process it with
 *		pq_getmsgstring.  Therefore, no character set conversion is done here,
 *		even though this is presumably useful only for text.
 *
 *		returns 0 if OK, EOF if trouble
 * --------------------------------
 */
int
pq_getstring(StringInfo s)
{
	int			i;

	resetStringInfo(s);

	/* Read until we get the terminating '\0' */
	for (;;)
	{
		while (PqRecvPointer >= PqRecvLength)
		{
			if (pq_recvbuf())	/* If nothing in buffer, then recv some */
				return EOF;		/* Failed to recv data */
		}

		for (i = PqRecvPointer; i < PqRecvLength; i++)
		{
			if (PqRecvBuffer[i] == '\0')
			{
				/* include the '\0' in the copy */
				appendBinaryStringInfo(s, PqRecvBuffer + PqRecvPointer,
									   i - PqRecvPointer + 1);
				PqRecvPointer = i + 1;	/* advance past \0 */
				return 0;
			}
		}

		/* If we're here we haven't got the \0 in the buffer yet. */
		appendBinaryStringInfo(s, PqRecvBuffer + PqRecvPointer,
							   PqRecvLength - PqRecvPointer);
		PqRecvPointer = PqRecvLength;
	}
}


/* --------------------------------
 *		pq_getmessage	- get a message with length word from connection
 *
 *		The return value is placed in an expansible StringInfo, which has
 *		already been initialized by the caller.
 *		Only the message body is placed in the StringInfo; the length word
 *		is removed.  Also, s->cursor is initialized to zero for convenience
 *		in scanning the message contents.
 *
 *		If maxlen is not zero, it is an upper limit on the length of the
 *		message we are willing to accept.  We abort the connection (by
 *		returning EOF) if client tries to send more than that.
 *
 *		returns 0 if OK, EOF if trouble
 * --------------------------------
 */
int
pq_getmessage(StringInfo s, int maxlen)
{
	int32		len;

	resetStringInfo(s);

	/* Read message length word */
	if (pq_getbytes((char *) &len, 4) == EOF)
	{
		ereport(COMMERROR,
				(errcode(ERRCODE_PROTOCOL_VIOLATION),
				 errmsg("unexpected EOF within message length word")));
		return EOF;
	}

	len = ntohl(len);

	if (len < 4 ||
		(maxlen > 0 && len > maxlen))
	{
		ereport(COMMERROR,
				(errcode(ERRCODE_PROTOCOL_VIOLATION),
				 errmsg("invalid message length")));
		return EOF;
	}

	len -= 4;					/* discount length itself */

	if (len > 0)
	{
		/*
		 * Allocate space for message.	If we run out of room (ridiculously
		 * large message), we will elog(ERROR), but we want to discard the
		 * message body so as not to lose communication sync.
		 */
		PG_TRY();
		{
			enlargeStringInfo(s, len);
		}
		PG_CATCH();
		{
			if (pq_discardbytes(len) == EOF)
				ereport(COMMERROR,
						(errcode(ERRCODE_PROTOCOL_VIOLATION),
						 errmsg("incomplete message from client")));
			PG_RE_THROW();
		}
		PG_END_TRY();

		/* And grab the message */
		if (pq_getbytes(s->data, len) == EOF)
		{
			ereport(COMMERROR,
					(errcode(ERRCODE_PROTOCOL_VIOLATION),
					 errmsg("incomplete message from client")));
			return EOF;
		}
		s->len = len;
		/* Place a trailing null per StringInfo convention */
		s->data[len] = '\0';
	}

	return 0;
}

/*
 * Wrapper of simple pthread locking functionality, using pthread_mutex_trylock
 * and loop to make it interruptible when waiting the lock;
 *
 * return true if successfuly acquires the lock, false if unable to get the lock
 * and interrupted by SIGTERM, otherwise, infinitely loop to acquire the mutex.
 *
 * If we are going to return false, we close the socket to client; this is crucial
 * for exiting dispatch thread if it is stuck on sending NOTICE to client, and hence
 * avoid mutex deadlock;
 *
 * NOTE: should not call CHECK_FOR_INTERRUPTS and ereport in this routine, since
 * it is in multi-thread context;
 */
static bool
pq_send_mutex_lock()
{
	int count = PQ_BUSY_TEST_COUNT_IN_EXITING;
	int mutex_res;

	do
	{
		mutex_res = pthread_mutex_trylock(&send_mutex);

		if (mutex_res == 0)
		{
			return true;
		}

		if (mutex_res == EBUSY)
		{
			/* No need to acquire lock for TermSignalReceived, since we are in
 			 * a loop here */
			if (TermSignalReceived)
			{
				/*
 				 * try PQ_BUSY_TEST_COUNT_IN_EXITING times before going to
 				 * close the socket, in case real concurrent writing is in
 				 * progress(compared to stuck send call in secure_write);
 				 *
 				 * It cannot help completely eliminate the false negative
 				 * cases, but giving the process is exiting, it is acceptable
 				 * to discard some messages, contrasted with the chance of
 				 * infinite stuck;
 				 */
				if (count-- < 0)
				{
					/* On Redhat and Suse, simple closing the socket would not get
					 * send() out of hanging state, shutdown() can do this(though not
					 * explicitly mentioned in manual page); however, if send over a
					 * socket which has been shutdown, process would be terminated by
					 * SIGPIPE; to avoid this race condition, we set the socket to be
					 * invalid before calling shutdown()
					 *
					 * On OSX, close() can get send() out of hanging state, while
					 * shutdown() would lead to SIGPIPE */
					int saved_fd = MyProcPort->sock;
					MyProcPort->sock = -1;
					whereToSendOutput = DestNone;
#ifndef __darwin__
					shutdown(saved_fd, SHUT_WR);
#endif
					closesocket(saved_fd);
					return false;
				}
			}
		}
		pg_usleep(1000L);
	} while (true);
}


/* --------------------------------
 *		pq_putbytes		- send bytes to connection (not flushed until pq_flush)
 *
 *		returns 0 if OK, EOF if trouble
 * --------------------------------
 */
int
pq_putbytes(const char *s, size_t len)
{
	int			res;

	/* Should only be called by old-style COPY OUT */
	Assert(DoingCopyOut);
	if (!pq_send_mutex_lock())
	{
		return EOF;
	}
	res = internal_putbytes(s, len);
	pthread_mutex_unlock(&send_mutex);
	return res;
}

static int
internal_putbytes(const char *s, size_t len)
{
	size_t		amount;

	while (len > 0)
	{
		/* If buffer is full, then flush it out */
		if (PqSendPointer >= PQ_BUFFER_SIZE)
			if (internal_flush())
				return EOF;
		amount = PQ_BUFFER_SIZE - PqSendPointer;
		if (amount > len)
			amount = len;
		memcpy(PqSendBuffer + PqSendPointer, s, amount);
		PqSendPointer += amount;
		s += amount;
		len -= amount;
	}
	return 0;
}

/* --------------------------------
 *		pq_flush		- flush pending output
 *
 *		returns 0 if OK, EOF if trouble
 * --------------------------------
 */
int
pq_flush(void)
{
	int			res;

	/* No-op if reentrant call */
	if ((Gp_role == GP_ROLE_DISPATCH) && IsUnderPostmaster)
	{
		if (!pq_send_mutex_lock())
		{
			return EOF;
		}
	}
	pq_set_nonblocking(false);
	res = internal_flush();
	if ((Gp_role == GP_ROLE_DISPATCH) && IsUnderPostmaster)
		pthread_mutex_unlock(&send_mutex);
	return res;
}

static int
internal_flush(void)
{
	static int	last_reported_send_errno = 0;

	char	   *bufptr = PqSendBuffer;
	char	   *bufend = PqSendBuffer + PqSendPointer;

	while (bufptr < bufend)
	{
		int			r;

		r = secure_write(MyProcPort, bufptr, bufend - bufptr);

		if (r <= 0)
		{
			if (errno == EINTR)
				continue;		/* Ok if we were interrupted */

			/*
			 * Careful: an ereport() that tries to write to the client would
			 * cause recursion to here, leading to stack overflow and core
			 * dump!  This message must go *only* to the postmaster log.
			 *
			 * If a client disconnects while we're in the midst of output, we
			 * might write quite a bit of data before we get to a safe query
			 * abort point.  So, suppress duplicate log messages.
			 */
			if (errno != last_reported_send_errno)
			{
				last_reported_send_errno = errno;
				
				HOLD_INTERRUPTS();

				/* we can use ereport here, for the protection of send mutex */
				ereport(COMMERROR,
						(errcode_for_socket_access(),
						 errmsg("could not send data to client: %m")));
				RESUME_INTERRUPTS();
			}

			/*
			 * We drop the buffered data anyway so that processing can
			 * continue, even though we'll probably quit soon.  We also set a
			 * flag that'll cause the next CHECK_FOR_INTERRUPTS to terminate
			 * the connection.
			 */
			PqSendPointer = 0;
			ClientConnectionLost = 1;
			InterruptPending = 1;
			return EOF;
		}

		last_reported_send_errno = 0;	/* reset after any successful send */
		bufptr += r;
	}

	PqSendPointer = 0;
	return 0;
}


/* --------------------------------
 * Message-level I/O routines begin here.
 *
 * These routines understand about the old-style COPY OUT protocol.
 * --------------------------------
 */


/* --------------------------------
 *		pq_putmessage	- send a normal message (suppressed in COPY OUT mode)
 *
 *		If msgtype is not '\0', it is a message type code to place before
 *		the message body.  If msgtype is '\0', then the message has no type
 *		code (this is only valid in pre-3.0 protocols).
 *
 *		len is the length of the message body data at *s.  In protocol 3.0
 *		and later, a message length word (equal to len+4 because it counts
 *		itself too) is inserted by this routine.
 *
 *		All normal messages are suppressed while old-style COPY OUT is in
 *		progress.  (In practice only a few notice messages might get emitted
 *		then; dropping them is annoying, but at least they will still appear
 *		in the postmaster log.)
 *
 *		We also suppress messages generated while pqcomm.c is busy.  This
 *		avoids any possibility of messages being inserted within other
 *		messages.
 *
 *		returns 0 if OK, EOF if trouble
 * --------------------------------
 */
int
pq_putmessage(char msgtype, const char *s, size_t len)
{

	if (DoingCopyOut)
	{
		return EOF;
	}

	if ((Gp_role == GP_ROLE_DISPATCH) && IsUnderPostmaster)
	{
		if (!pq_send_mutex_lock())
		{
			return EOF;
		}
	}

	if (msgtype)
	{
		if (internal_putbytes(&msgtype, 1))
			goto fail;
	}

	if (PG_PROTOCOL_MAJOR(FrontendProtocol) >= 3)
	{
		uint32		n32;

		n32 = htonl((uint32) (len + 4));
		if (internal_putbytes((char *) &n32, 4))
			goto fail;
	}

	if (internal_putbytes(s, len))
		goto fail;

	if ((Gp_role == GP_ROLE_DISPATCH) && IsUnderPostmaster)
		pthread_mutex_unlock(&send_mutex);

	return 0;

fail:
	if ((Gp_role == GP_ROLE_DISPATCH) && IsUnderPostmaster)
		pthread_mutex_unlock(&send_mutex);
	return EOF;
}

/* --------------------------------
 *		pq_startcopyout - inform libpq that an old-style COPY OUT transfer
 *			is beginning
 * --------------------------------
 */
void
pq_startcopyout(void)
{
	if (!pq_send_mutex_lock())
	{
		/* no need to return a status, since socket has been closed in failed cases */
		return;
	}
	DoingCopyOut = true;
	pthread_mutex_unlock(&send_mutex);
}

/* --------------------------------
 *		pq_endcopyout	- end an old-style COPY OUT transfer
 *
 *		If errorAbort is indicated, we are aborting a COPY OUT due to an error,
 *		and must send a terminator line.  Since a partial data line might have
 *		been emitted, send a couple of newlines first (the first one could
 *		get absorbed by a backslash...)  Note that old-style COPY OUT does
 *		not allow binary transfers, so a textual terminator is always correct.
 * --------------------------------
 */
void
pq_endcopyout(bool errorAbort)
{
	if (!DoingCopyOut)
		return;
	if (errorAbort)
		pq_putbytes("\n\n\\.\n", 5);
	/* in non-error case, copy.c will have emitted the terminator line */
	if (!pq_send_mutex_lock())
	{
		return;
	}
	DoingCopyOut = false;
	pthread_mutex_unlock(&send_mutex);
}


/*
 * Support for TCP Keepalive parameters
 */

/*
 * On Windows, we need to set both idle and interval at the same time.
 * We also cannot reset them to the default (setting to zero will
 * actually set them to zero, not default), therefor we fallback to
 * the out-of-the-box default instead.
 */
#if defined(WIN32) && defined(SIO_KEEPALIVE_VALS)
static int
pq_setkeepaliveswin32(Port *port, int idle, int interval)
{
	struct tcp_keepalive	ka;
	DWORD					retsize;

	if (idle <= 0)
		idle = 2 * 60 * 60; /* default = 2 hours */
	if (interval <= 0)
		interval = 1;       /* default = 1 second */

	ka.onoff = 1;
	ka.keepalivetime = idle * 1000;
	ka.keepaliveinterval = interval * 1000;

	if (WSAIoctl(port->sock,
				 SIO_KEEPALIVE_VALS,
				 (LPVOID) &ka,
				 sizeof(ka),
				 NULL,
				 0,
				 &retsize,
				 NULL,
				 NULL)
		!= 0)
	{
		elog(LOG, "WSAIoctl(SIO_KEEPALIVE_VALS) failed: %ui",
			 WSAGetLastError());
		return STATUS_ERROR;
	}
	if (port->keepalives_idle != idle)
		port->keepalives_idle = idle;
	if (port->keepalives_interval != interval)
		port->keepalives_interval = interval;
	return STATUS_OK;
}
#endif

int
pq_getkeepalivesidle(Port *port)
{
#if defined(TCP_KEEPIDLE) || defined(TCP_KEEPALIVE) || defined(WIN32)
	if (port == NULL || IS_AF_UNIX(port->laddr.addr.ss_family))
		return 0;

	if (port->keepalives_idle != 0)
		return port->keepalives_idle;

	if (port->default_keepalives_idle == 0)
	{
#ifndef WIN32
		socklen_t size = sizeof(port->default_keepalives_idle);

#ifdef TCP_KEEPIDLE
		if (getsockopt(port->sock, IPPROTO_TCP, TCP_KEEPIDLE,
					   (char *) &port->default_keepalives_idle,
					   &size) < 0)
		{
			elog(LOG, "getsockopt(TCP_KEEPIDLE) failed: %m");
			port->default_keepalives_idle = -1; /* don't know */
		}
#else
		if (getsockopt(port->sock, IPPROTO_TCP, TCP_KEEPALIVE,
					   (char *) &port->default_keepalives_idle,
					   &size) < 0)
		{
			elog(LOG, "getsockopt(TCP_KEEPALIVE) failed: %m");
			port->default_keepalives_idle = -1; /* don't know */
		}
#endif /* TCP_KEEPIDLE */
#else /* WIN32 */
		/* We can't get the defaults on Windows, so return "don't know" */
		port->default_keepalives_idle = -1;
#endif /* WIN32 */
	}

	return port->default_keepalives_idle;
#else
	return 0;
#endif
}

int
pq_setkeepalivesidle(int idle, Port *port)
{
	if (port == NULL || IS_AF_UNIX(port->laddr.addr.ss_family))
		return STATUS_OK;

#if defined(TCP_KEEPIDLE) || defined(TCP_KEEPALIVE) || defined(SIO_KEEPALIVE_VALS)
	if (idle == port->keepalives_idle)
		return STATUS_OK;

#ifndef WIN32
	if (port->default_keepalives_idle <= 0)
	{
		if (pq_getkeepalivesidle(port) < 0)
		{
			if (idle == 0)
				return STATUS_OK;		/* default is set but unknown */
			else
				return STATUS_ERROR;
		}
	}

	if (idle == 0)
		idle = port->default_keepalives_idle;

#ifdef TCP_KEEPIDLE
	if (setsockopt(port->sock, IPPROTO_TCP, TCP_KEEPIDLE,
				   (char *) &idle, sizeof(idle)) < 0)
	{
		elog(LOG, "setsockopt(TCP_KEEPIDLE) failed: %m");
		return STATUS_ERROR;
	}
#else
	if (setsockopt(port->sock, IPPROTO_TCP, TCP_KEEPALIVE,
				   (char *) &idle, sizeof(idle)) < 0)
	{
		elog(LOG, "setsockopt(TCP_KEEPALIVE) failed: %m");
		return STATUS_ERROR;
	}
#endif

	port->keepalives_idle = idle;
#else /* WIN32 */
	return pq_setkeepaliveswin32(port, idle, port->keepalives_interval);
#endif
#else /* TCP_KEEPIDLE || SIO_KEEPALIVE_VALS */
	if (idle != 0)
	{
		elog(LOG, "setting the keepalive idle time is not supported");
		return STATUS_ERROR;
	}
#endif

	return STATUS_OK;
}

int
pq_getkeepalivesinterval(Port *port)
{
#if defined(TCP_KEEPINTVL) || defined(SIO_KEEPALIVE_VALS)
	if (port == NULL || IS_AF_UNIX(port->laddr.addr.ss_family))
		return 0;

	if (port->keepalives_interval != 0)
		return port->keepalives_interval;

	if (port->default_keepalives_interval == 0)
	{
#ifndef WIN32
		socklen_t size = sizeof(port->default_keepalives_interval);

		if (getsockopt(port->sock, IPPROTO_TCP, TCP_KEEPINTVL,
					   (char *) &port->default_keepalives_interval,
					   &size) < 0)
		{
			elog(LOG, "getsockopt(TCP_KEEPINTVL) failed: %m");
			port->default_keepalives_interval = -1;		/* don't know */
		}
#else
		/* We can't get the defaults on Windows, so return "don't know" */
		port->default_keepalives_interval = -1;
#endif /* WIN32 */
	}

	return port->default_keepalives_interval;
#else
	return 0;
#endif
}

int
pq_setkeepalivesinterval(int interval, Port *port)
{
	if (port == NULL || IS_AF_UNIX(port->laddr.addr.ss_family))
		return STATUS_OK;

#if defined(TCP_KEEPINTVL) || defined (SIO_KEEPALIVE_VALS)
	if (interval == port->keepalives_interval)
		return STATUS_OK;

#ifndef WIN32
	if (port->default_keepalives_interval <= 0)
	{
		if (pq_getkeepalivesinterval(port) < 0)
		{
			if (interval == 0)
				return STATUS_OK;		/* default is set but unknown */
			else
				return STATUS_ERROR;
		}
	}

	if (interval == 0)
		interval = port->default_keepalives_interval;

	if (setsockopt(port->sock, IPPROTO_TCP, TCP_KEEPINTVL,
				   (char *) &interval, sizeof(interval)) < 0)
	{
		elog(LOG, "setsockopt(TCP_KEEPINTVL) failed: %m");
		return STATUS_ERROR;
	}

	port->keepalives_interval = interval;
#else /* WIN32 */
	return pq_setkeepaliveswin32(port, port->keepalives_idle, interval);
#endif
#else
	if (interval != 0)
	{
		elog(LOG, "setsockopt(TCP_KEEPINTVL) not supported");
		return STATUS_ERROR;
	}
#endif

	return STATUS_OK;
}

int
pq_getkeepalivescount(Port *port)
{
#ifdef TCP_KEEPCNT
	if (port == NULL || IS_AF_UNIX(port->laddr.addr.ss_family))
		return 0;

	if (port->keepalives_count != 0)
		return port->keepalives_count;

	if (port->default_keepalives_count == 0)
	{
		socklen_t size = sizeof(port->default_keepalives_count);

		if (getsockopt(port->sock, IPPROTO_TCP, TCP_KEEPCNT,
					   (char *) &port->default_keepalives_count,
					   &size) < 0)
		{
			elog(LOG, "getsockopt(TCP_KEEPCNT) failed: %m");
			port->default_keepalives_count = -1;		/* don't know */
		}
	}

	return port->default_keepalives_count;
#else
	return 0;
#endif
}

int
pq_setkeepalivescount(int count, Port *port)
{
	if (port == NULL || IS_AF_UNIX(port->laddr.addr.ss_family))
		return STATUS_OK;

#ifdef TCP_KEEPCNT
	if (count == port->keepalives_count)
		return STATUS_OK;

	if (port->default_keepalives_count <= 0)
	{
		if (pq_getkeepalivescount(port) < 0)
		{
			if (count == 0)
				return STATUS_OK;		/* default is set but unknown */
			else
				return STATUS_ERROR;
		}
	}

	if (count == 0)
		count = port->default_keepalives_count;

	if (setsockopt(port->sock, IPPROTO_TCP, TCP_KEEPCNT,
				   (char *) &count, sizeof(count)) < 0)
	{
		elog(LOG, "setsockopt(TCP_KEEPCNT) failed: %m");
		return STATUS_ERROR;
	}

	port->keepalives_count = count;
#else
	if (count != 0)
	{
		elog(LOG, "setsockopt(TCP_KEEPCNT) not supported");
		return STATUS_ERROR;
	}
#endif

	return STATUS_OK;
}