blob: db57799753b8cb186b73327e7e8ee3921aa99423 [file] [log] [blame]
<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
<!--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<!-- Do not modify this file directly. Instead, copy entries that you -->
<!-- wish to modify from this file into core-site.xml and change them -->
<!-- there. If core-site.xml does not already exist, create it. -->
<configuration>
<!--- global properties -->
<property>
<name>hadoop.common.configuration.version</name>
<value>0.23.0</value>
<description>version of this configuration file</description>
</property>
<property>
<name>hadoop.tmp.dir</name>
<value>/tmp/hadoop-${user.name}</value>
<description>A base for other temporary directories.</description>
</property>
<property>
<name>io.native.lib.available</name>
<value>true</value>
<description>Should native hadoop libraries, if present, be used.</description>
</property>
<property>
<name>hadoop.http.filter.initializers</name>
<value>org.apache.hadoop.http.lib.StaticUserWebFilter</value>
<description>A comma separated list of class names. Each class in the list
must extend org.apache.hadoop.http.FilterInitializer. The corresponding
Filter will be initialized. Then, the Filter will be applied to all user
facing jsp and servlet web pages. The ordering of the list defines the
ordering of the filters.</description>
</property>
<!--- security properties -->
<property>
<name>hadoop.security.authorization</name>
<value>false</value>
<description>Is service-level authorization enabled?</description>
</property>
<property>
<name>hadoop.security.instrumentation.requires.admin</name>
<value>false</value>
<description>
Indicates if administrator ACLs are required to access
instrumentation servlets (JMX, METRICS, CONF, STACKS).
</description>
</property>
<property>
<name>hadoop.security.authentication</name>
<value>simple</value>
<description>Possible values are simple (no authentication), and kerberos
</description>
</property>
<property>
<name>hadoop.security.group.mapping</name>
<value>org.apache.hadoop.security.JniBasedUnixGroupsMappingWithFallback</value>
<description>
Class for user to group mapping (get groups for a given user) for ACL.
The default implementation,
org.apache.hadoop.security.JniBasedUnixGroupsMappingWithFallback,
will determine if the Java Native Interface (JNI) is available. If JNI is
available the implementation will use the API within hadoop to resolve a
list of groups for a user. If JNI is not available then the shell
implementation, ShellBasedUnixGroupsMapping, is used. This implementation
shells out to the Linux/Unix environment with the
<code>bash -c groups</code> command to resolve a list of groups for a user.
</description>
</property>
<property>
<name>hadoop.security.groups.cache.secs</name>
<value>300</value>
<description>
This is the config controlling the validity of the entries in the cache
containing the user->group mapping. When this duration has expired,
then the implementation of the group mapping provider is invoked to get
the groups of the user and then cached back.
</description>
</property>
<property>
<name>hadoop.security.group.mapping.ldap.url</name>
<value></value>
<description>
The URL of the LDAP server to use for resolving user groups when using
the LdapGroupsMapping user to group mapping.
</description>
</property>
<property>
<name>hadoop.security.group.mapping.ldap.ssl</name>
<value>false</value>
<description>
Whether or not to use SSL when connecting to the LDAP server.
</description>
</property>
<property>
<name>hadoop.security.group.mapping.ldap.ssl.keystore</name>
<value></value>
<description>
File path to the SSL keystore that contains the SSL certificate required
by the LDAP server.
</description>
</property>
<property>
<name>hadoop.security.group.mapping.ldap.ssl.keystore.password.file</name>
<value></value>
<description>
The path to a file containing the password of the LDAP SSL keystore.
IMPORTANT: This file should be readable only by the Unix user running
the daemons.
</description>
</property>
<property>
<name>hadoop.security.group.mapping.ldap.bind.user</name>
<value></value>
<description>
The distinguished name of the user to bind as when connecting to the LDAP
server. This may be left blank if the LDAP server supports anonymous binds.
</description>
</property>
<property>
<name>hadoop.security.group.mapping.ldap.bind.password.file</name>
<value></value>
<description>
The path to a file containing the password of the bind user.
IMPORTANT: This file should be readable only by the Unix user running
the daemons.
</description>
</property>
<property>
<name>hadoop.security.group.mapping.ldap.base</name>
<value></value>
<description>
The search base for the LDAP connection. This is a distinguished name,
and will typically be the root of the LDAP directory.
</description>
</property>
<property>
<name>hadoop.security.group.mapping.ldap.search.filter.user</name>
<value>(&amp;(objectClass=user)(sAMAccountName={0}))</value>
<description>
An additional filter to use when searching for LDAP users. The default will
usually be appropriate for Active Directory installations. If connecting to
an LDAP server with a non-AD schema, this should be replaced with
(&amp;(objectClass=inetOrgPerson)(uid={0}). {0} is a special string used to
denote where the username fits into the filter.
</description>
</property>
<property>
<name>hadoop.security.group.mapping.ldap.search.filter.group</name>
<value>(objectClass=group)</value>
<description>
An additional filter to use when searching for LDAP groups. This should be
changed when resolving groups against a non-Active Directory installation.
posixGroups are currently not a supported group class.
</description>
</property>
<property>
<name>hadoop.security.group.mapping.ldap.search.attr.member</name>
<value>member</value>
<description>
The attribute of the group object that identifies the users that are
members of the group. The default will usually be appropriate for
any LDAP installation.
</description>
</property>
<property>
<name>hadoop.security.group.mapping.ldap.search.attr.group.name</name>
<value>cn</value>
<description>
The attribute of the group object that identifies the group name. The
default will usually be appropriate for all LDAP systems.
</description>
</property>
<property>
<name>hadoop.security.service.user.name.key</name>
<value></value>
<description>
For those cases where the same RPC protocol is implemented by multiple
servers, this configuration is required for specifying the principal
name to use for the service when the client wishes to make an RPC call.
</description>
</property>
<property>
<name>hadoop.security.uid.cache.secs</name>
<value>14400</value>
<description>
This is the config controlling the validity of the entries in the cache
containing the userId to userName and groupId to groupName used by
NativeIO getFstat().
</description>
</property>
<property>
<name>hadoop.rpc.protection</name>
<value>authentication</value>
<description>This field sets the quality of protection for secured sasl
connections. Possible values are authentication, integrity and privacy.
authentication means authentication only and no integrity or privacy;
integrity implies authentication and integrity are enabled; and privacy
implies all of authentication, integrity and privacy are enabled.
</description>
</property>
<property>
<name>hadoop.work.around.non.threadsafe.getpwuid</name>
<value>false</value>
<description>Some operating systems or authentication modules are known to
have broken implementations of getpwuid_r and getpwgid_r, such that these
calls are not thread-safe. Symptoms of this problem include JVM crashes
with a stack trace inside these functions. If your system exhibits this
issue, enable this configuration parameter to include a lock around the
calls as a workaround.
An incomplete list of some systems known to have this issue is available
at http://wiki.apache.org/hadoop/KnownBrokenPwuidImplementations
</description>
</property>
<property>
<name>hadoop.kerberos.kinit.command</name>
<value>kinit</value>
<description>Used to periodically renew Kerberos credentials when provided
to Hadoop. The default setting assumes that kinit is in the PATH of users
running the Hadoop client. Change this to the absolute path to kinit if this
is not the case.
</description>
</property>
<property>
<name>hadoop.security.auth_to_local</name>
<value></value>
<description>Maps kerberos principals to local user names</description>
</property>
<!-- i/o properties -->
<property>
<name>io.file.buffer.size</name>
<value>4096</value>
<description>The size of buffer for use in sequence files.
The size of this buffer should probably be a multiple of hardware
page size (4096 on Intel x86), and it determines how much data is
buffered during read and write operations.</description>
</property>
<property>
<name>io.bytes.per.checksum</name>
<value>512</value>
<description>The number of bytes per checksum. Must not be larger than
io.file.buffer.size.</description>
</property>
<property>
<name>io.skip.checksum.errors</name>
<value>false</value>
<description>If true, when a checksum error is encountered while
reading a sequence file, entries are skipped, instead of throwing an
exception.</description>
</property>
<property>
<name>io.compression.codecs</name>
<value></value>
<description>A comma-separated list of the compression codec classes that can
be used for compression/decompression. In addition to any classes specified
with this property (which take precedence), codec classes on the classpath
are discovered using a Java ServiceLoader.</description>
</property>
<property>
<name>io.compression.codec.bzip2.library</name>
<value>system-native</value>
<description>The native-code library to be used for compression and
decompression by the bzip2 codec. This library could be specified
either by by name or the full pathname. In the former case, the
library is located by the dynamic linker, usually searching the
directories specified in the environment variable LD_LIBRARY_PATH.
The value of "system-native" indicates that the default system
library should be used. To indicate that the algorithm should
operate entirely in Java, specify "java-builtin".</description>
</property>
<property>
<name>io.serializations</name>
<value>org.apache.hadoop.io.serializer.WritableSerialization,org.apache.hadoop.io.serializer.avro.AvroSpecificSerialization,org.apache.hadoop.io.serializer.avro.AvroReflectSerialization</value>
<description>A list of serialization classes that can be used for
obtaining serializers and deserializers.</description>
</property>
<property>
<name>io.seqfile.local.dir</name>
<value>${hadoop.tmp.dir}/io/local</value>
<description>The local directory where sequence file stores intermediate
data files during merge. May be a comma-separated list of
directories on different devices in order to spread disk i/o.
Directories that do not exist are ignored.
</description>
</property>
<property>
<name>io.map.index.skip</name>
<value>0</value>
<description>Number of index entries to skip between each entry.
Zero by default. Setting this to values larger than zero can
facilitate opening large MapFiles using less memory.</description>
</property>
<property>
<name>io.map.index.interval</name>
<value>128</value>
<description>
MapFile consist of two files - data file (tuples) and index file
(keys). For every io.map.index.interval records written in the
data file, an entry (record-key, data-file-position) is written
in the index file. This is to allow for doing binary search later
within the index file to look up records by their keys and get their
closest positions in the data file.
</description>
</property>
<!-- file system properties -->
<property>
<name>fs.defaultFS</name>
<value>file:///</value>
<description>The name of the default file system. A URI whose
scheme and authority determine the FileSystem implementation. The
uri's scheme determines the config property (fs.SCHEME.impl) naming
the FileSystem implementation class. The uri's authority is used to
determine the host, port, etc. for a filesystem.</description>
</property>
<property>
<name>fs.default.name</name>
<value>file:///</value>
<description>Deprecated. Use (fs.defaultFS) property
instead</description>
</property>
<property>
<name>fs.trash.interval</name>
<value>0</value>
<description>Number of minutes after which the checkpoint
gets deleted. If zero, the trash feature is disabled.
This option may be configured both on the server and the
client. If trash is disabled server side then the client
side configuration is checked. If trash is enabled on the
server side then the value configured on the server is
used and the client configuration value is ignored.
</description>
</property>
<property>
<name>fs.trash.checkpoint.interval</name>
<value>0</value>
<description>Number of minutes between trash checkpoints.
Should be smaller or equal to fs.trash.interval. If zero,
the value is set to the value of fs.trash.interval.
Every time the checkpointer runs it creates a new checkpoint
out of current and removes checkpoints created more than
fs.trash.interval minutes ago.
</description>
</property>
<property>
<name>fs.AbstractFileSystem.file.impl</name>
<value>org.apache.hadoop.fs.local.LocalFs</value>
<description>The AbstractFileSystem for file: uris.</description>
</property>
<property>
<name>fs.AbstractFileSystem.hdfs.impl</name>
<value>org.apache.hadoop.fs.Hdfs</value>
<description>The FileSystem for hdfs: uris.</description>
</property>
<property>
<name>fs.AbstractFileSystem.viewfs.impl</name>
<value>org.apache.hadoop.fs.viewfs.ViewFs</value>
<description>The AbstractFileSystem for view file system for viewfs: uris
(ie client side mount table:).</description>
</property>
<property>
<name>fs.ftp.host</name>
<value>0.0.0.0</value>
<description>FTP filesystem connects to this server</description>
</property>
<property>
<name>fs.ftp.host.port</name>
<value>21</value>
<description>
FTP filesystem connects to fs.ftp.host on this port
</description>
</property>
<property>
<name>fs.df.interval</name>
<value>60000</value>
<description>Disk usage statistics refresh interval in msec.</description>
</property>
<property>
<name>fs.s3.block.size</name>
<value>67108864</value>
<description>Block size to use when writing files to S3.</description>
</property>
<property>
<name>fs.s3.buffer.dir</name>
<value>${hadoop.tmp.dir}/s3</value>
<description>Determines where on the local filesystem the S3 filesystem
should store files before sending them to S3
(or after retrieving them from S3).
</description>
</property>
<property>
<name>fs.s3.maxRetries</name>
<value>4</value>
<description>The maximum number of retries for reading or writing files to S3,
before we signal failure to the application.
</description>
</property>
<property>
<name>fs.s3.sleepTimeSeconds</name>
<value>10</value>
<description>The number of seconds to sleep between each S3 retry.
</description>
</property>
<property>
<name>fs.automatic.close</name>
<value>true</value>
<description>By default, FileSystem instances are automatically closed at program
exit using a JVM shutdown hook. Setting this property to false disables this
behavior. This is an advanced option that should only be used by server applications
requiring a more carefully orchestrated shutdown sequence.
</description>
</property>
<property>
<name>fs.s3n.block.size</name>
<value>67108864</value>
<description>Block size to use when reading files using the native S3
filesystem (s3n: URIs).</description>
</property>
<property>
<name>io.seqfile.compress.blocksize</name>
<value>1000000</value>
<description>The minimum block size for compression in block compressed
SequenceFiles.
</description>
</property>
<property>
<name>io.seqfile.lazydecompress</name>
<value>true</value>
<description>Should values of block-compressed SequenceFiles be decompressed
only when necessary.
</description>
</property>
<property>
<name>io.seqfile.sorter.recordlimit</name>
<value>1000000</value>
<description>The limit on number of records to be kept in memory in a spill
in SequenceFiles.Sorter
</description>
</property>
<property>
<name>io.mapfile.bloom.size</name>
<value>1048576</value>
<description>The size of BloomFilter-s used in BloomMapFile. Each time this many
keys is appended the next BloomFilter will be created (inside a DynamicBloomFilter).
Larger values minimize the number of filters, which slightly increases the performance,
but may waste too much space if the total number of keys is usually much smaller
than this number.
</description>
</property>
<property>
<name>io.mapfile.bloom.error.rate</name>
<value>0.005</value>
<description>The rate of false positives in BloomFilter-s used in BloomMapFile.
As this value decreases, the size of BloomFilter-s increases exponentially. This
value is the probability of encountering false positives (default is 0.5%).
</description>
</property>
<property>
<name>hadoop.util.hash.type</name>
<value>murmur</value>
<description>The default implementation of Hash. Currently this can take one of the
two values: 'murmur' to select MurmurHash and 'jenkins' to select JenkinsHash.
</description>
</property>
<!-- ipc properties -->
<property>
<name>ipc.client.idlethreshold</name>
<value>4000</value>
<description>Defines the threshold number of connections after which
connections will be inspected for idleness.
</description>
</property>
<property>
<name>ipc.client.kill.max</name>
<value>10</value>
<description>Defines the maximum number of clients to disconnect in one go.
</description>
</property>
<property>
<name>ipc.client.connection.maxidletime</name>
<value>10000</value>
<description>The maximum time in msec after which a client will bring down the
connection to the server.
</description>
</property>
<property>
<name>ipc.client.connect.max.retries</name>
<value>10</value>
<description>Indicates the number of retries a client will make to establish
a server connection.
</description>
</property>
<property>
<name>ipc.client.connect.timeout</name>
<value>20000</value>
<description>Indicates the number of milliseconds a client will wait for the
socket to establish a server connection.
</description>
</property>
<property>
<name>ipc.client.connect.max.retries.on.timeouts</name>
<value>45</value>
<description>Indicates the number of retries a client will make on socket timeout
to establish a server connection.
</description>
</property>
<property>
<name>ipc.server.listen.queue.size</name>
<value>128</value>
<description>Indicates the length of the listen queue for servers accepting
client connections.
</description>
</property>
<property>
<name>ipc.server.tcpnodelay</name>
<value>false</value>
<description>Turn on/off Nagle's algorithm for the TCP socket connection on
the server. Setting to true disables the algorithm and may decrease latency
with a cost of more/smaller packets.
</description>
</property>
<property>
<name>ipc.client.tcpnodelay</name>
<value>false</value>
<description>Turn on/off Nagle's algorithm for the TCP socket connection on
the client. Setting to true disables the algorithm and may decrease latency
with a cost of more/smaller packets.
</description>
</property>
<!-- Proxy Configuration -->
<property>
<name>hadoop.rpc.socket.factory.class.default</name>
<value>org.apache.hadoop.net.StandardSocketFactory</value>
<description> Default SocketFactory to use. This parameter is expected to be
formatted as "package.FactoryClassName".
</description>
</property>
<property>
<name>hadoop.rpc.socket.factory.class.ClientProtocol</name>
<value></value>
<description> SocketFactory to use to connect to a DFS. If null or empty, use
hadoop.rpc.socket.class.default. This socket factory is also used by
DFSClient to create sockets to DataNodes.
</description>
</property>
<property>
<name>hadoop.socks.server</name>
<value></value>
<description> Address (host:port) of the SOCKS server to be used by the
SocksSocketFactory.
</description>
</property>
<!-- Rack Configuration -->
<property>
<name>net.topology.node.switch.mapping.impl</name>
<value>org.apache.hadoop.net.ScriptBasedMapping</value>
<description> The default implementation of the DNSToSwitchMapping. It
invokes a script specified in net.topology.script.file.name to resolve
node names. If the value for net.topology.script.file.name is not set, the
default value of DEFAULT_RACK is returned for all node names.
</description>
</property>
<property>
<name>net.topology.script.file.name</name>
<value></value>
<description> The script name that should be invoked to resolve DNS names to
NetworkTopology names. Example: the script would take host.foo.bar as an
argument, and return /rack1 as the output.
</description>
</property>
<property>
<name>net.topology.script.number.args</name>
<value>100</value>
<description> The max number of args that the script configured with
net.topology.script.file.name should be run with. Each arg is an
IP address.
</description>
</property>
<property>
<name>net.topology.table.file.name</name>
<value></value>
<description> The file name for a topology file, which is used when the
net.topology.script.file.name property is set to
org.apache.hadoop.net.TableMapping. The file format is a two column text
file, with columns separated by whitespace. The first column is a DNS or
IP address and the second column specifies the rack where the address maps.
If no entry corresponding to a host in the cluster is found, then
/default-rack is assumed.
</description>
</property>
<!-- Local file system -->
<property>
<name>file.stream-buffer-size</name>
<value>4096</value>
<description>The size of buffer to stream files.
The size of this buffer should probably be a multiple of hardware
page size (4096 on Intel x86), and it determines how much data is
buffered during read and write operations.</description>
</property>
<property>
<name>file.bytes-per-checksum</name>
<value>512</value>
<description>The number of bytes per checksum. Must not be larger than
file.stream-buffer-size</description>
</property>
<property>
<name>file.client-write-packet-size</name>
<value>65536</value>
<description>Packet size for clients to write</description>
</property>
<property>
<name>file.blocksize</name>
<value>67108864</value>
<description>Block size</description>
</property>
<property>
<name>file.replication</name>
<value>1</value>
<description>Replication factor</description>
</property>
<!-- s3 File System -->
<property>
<name>s3.stream-buffer-size</name>
<value>4096</value>
<description>The size of buffer to stream files.
The size of this buffer should probably be a multiple of hardware
page size (4096 on Intel x86), and it determines how much data is
buffered during read and write operations.</description>
</property>
<property>
<name>s3.bytes-per-checksum</name>
<value>512</value>
<description>The number of bytes per checksum. Must not be larger than
s3.stream-buffer-size</description>
</property>
<property>
<name>s3.client-write-packet-size</name>
<value>65536</value>
<description>Packet size for clients to write</description>
</property>
<property>
<name>s3.blocksize</name>
<value>67108864</value>
<description>Block size</description>
</property>
<property>
<name>s3.replication</name>
<value>3</value>
<description>Replication factor</description>
</property>
<!-- s3native File System -->
<property>
<name>s3native.stream-buffer-size</name>
<value>4096</value>
<description>The size of buffer to stream files.
The size of this buffer should probably be a multiple of hardware
page size (4096 on Intel x86), and it determines how much data is
buffered during read and write operations.</description>
</property>
<property>
<name>s3native.bytes-per-checksum</name>
<value>512</value>
<description>The number of bytes per checksum. Must not be larger than
s3native.stream-buffer-size</description>
</property>
<property>
<name>s3native.client-write-packet-size</name>
<value>65536</value>
<description>Packet size for clients to write</description>
</property>
<property>
<name>s3native.blocksize</name>
<value>67108864</value>
<description>Block size</description>
</property>
<property>
<name>s3native.replication</name>
<value>3</value>
<description>Replication factor</description>
</property>
<!-- Kosmos File System -->
<property>
<name>kfs.stream-buffer-size</name>
<value>4096</value>
<description>The size of buffer to stream files.
The size of this buffer should probably be a multiple of hardware
page size (4096 on Intel x86), and it determines how much data is
buffered during read and write operations.</description>
</property>
<property>
<name>kfs.bytes-per-checksum</name>
<value>512</value>
<description>The number of bytes per checksum. Must not be larger than
kfs.stream-buffer-size</description>
</property>
<property>
<name>kfs.client-write-packet-size</name>
<value>65536</value>
<description>Packet size for clients to write</description>
</property>
<property>
<name>kfs.blocksize</name>
<value>67108864</value>
<description>Block size</description>
</property>
<property>
<name>kfs.replication</name>
<value>3</value>
<description>Replication factor</description>
</property>
<!-- FTP file system -->
<property>
<name>ftp.stream-buffer-size</name>
<value>4096</value>
<description>The size of buffer to stream files.
The size of this buffer should probably be a multiple of hardware
page size (4096 on Intel x86), and it determines how much data is
buffered during read and write operations.</description>
</property>
<property>
<name>ftp.bytes-per-checksum</name>
<value>512</value>
<description>The number of bytes per checksum. Must not be larger than
ftp.stream-buffer-size</description>
</property>
<property>
<name>ftp.client-write-packet-size</name>
<value>65536</value>
<description>Packet size for clients to write</description>
</property>
<property>
<name>ftp.blocksize</name>
<value>67108864</value>
<description>Block size</description>
</property>
<property>
<name>ftp.replication</name>
<value>3</value>
<description>Replication factor</description>
</property>
<!-- Tfile -->
<property>
<name>tfile.io.chunk.size</name>
<value>1048576</value>
<description>
Value chunk size in bytes. Default to
1MB. Values of the length less than the chunk size is
guaranteed to have known value length in read time (See also
TFile.Reader.Scanner.Entry.isValueLengthKnown()).
</description>
</property>
<property>
<name>tfile.fs.output.buffer.size</name>
<value>262144</value>
<description>
Buffer size used for FSDataOutputStream in bytes.
</description>
</property>
<property>
<name>tfile.fs.input.buffer.size</name>
<value>262144</value>
<description>
Buffer size used for FSDataInputStream in bytes.
</description>
</property>
<!-- HTTP web-consoles Authentication -->
<property>
<name>hadoop.http.authentication.type</name>
<value>simple</value>
<description>
Defines authentication used for Oozie HTTP endpoint.
Supported values are: simple | kerberos | #AUTHENTICATION_HANDLER_CLASSNAME#
</description>
</property>
<property>
<name>hadoop.http.authentication.token.validity</name>
<value>36000</value>
<description>
Indicates how long (in seconds) an authentication token is valid before it has
to be renewed.
</description>
</property>
<property>
<name>hadoop.http.authentication.signature.secret.file</name>
<value>${user.home}/hadoop-http-auth-signature-secret</value>
<description>
The signature secret for signing the authentication tokens.
The same secret should be used for JT/NN/DN/TT configurations.
</description>
</property>
<property>
<name>hadoop.http.authentication.cookie.domain</name>
<value></value>
<description>
The domain to use for the HTTP cookie that stores the authentication token.
In order to authentiation to work correctly across all Hadoop nodes web-consoles
the domain must be correctly set.
IMPORTANT: when using IP addresses, browsers ignore cookies with domain settings.
For this setting to work properly all nodes in the cluster must be configured
to generate URLs with hostname.domain names on it.
</description>
</property>
<property>
<name>hadoop.http.authentication.simple.anonymous.allowed</name>
<value>true</value>
<description>
Indicates if anonymous requests are allowed when using 'simple' authentication.
</description>
</property>
<property>
<name>hadoop.http.authentication.kerberos.principal</name>
<value>HTTP/_HOST@LOCALHOST</value>
<description>
Indicates the Kerberos principal to be used for HTTP endpoint.
The principal MUST start with 'HTTP/' as per Kerberos HTTP SPNEGO specification.
</description>
</property>
<property>
<name>hadoop.http.authentication.kerberos.keytab</name>
<value>${user.home}/hadoop.keytab</value>
<description>
Location of the keytab file with the credentials for the principal.
Referring to the same keytab file Oozie uses for its Kerberos credentials for Hadoop.
</description>
</property>
<property>
<name>dfs.ha.fencing.methods</name>
<value></value>
<description>
List of fencing methods to use for service fencing. May contain
builtin methods (eg shell and sshfence) or user-defined method.
</description>
</property>
<property>
<name>dfs.ha.fencing.ssh.connect-timeout</name>
<value>30000</value>
<description>
SSH connection timeout, in milliseconds, to use with the builtin
sshfence fencer.
</description>
</property>
<property>
<name>dfs.ha.fencing.ssh.private-key-files</name>
<value></value>
<description>
The SSH private key files to use with the builtin sshfence fencer.
</description>
</property>
<!-- Static Web User Filter properties. -->
<property>
<description>
The user name to filter as, on static web filters
while rendering content. An example use is the HDFS
web UI (user to be used for browsing files).
</description>
<name>hadoop.http.staticuser.user</name>
<value>dr.who</value>
</property>
<property>
<name>ha.zookeeper.quorum</name>
<description>
A list of ZooKeeper server addresses, separated by commas, that are
to be used by the ZKFailoverController in automatic failover.
</description>
</property>
<property>
<name>ha.zookeeper.session-timeout.ms</name>
<value>5000</value>
<description>
The session timeout to use when the ZKFC connects to ZooKeeper.
Setting this value to a lower value implies that server crashes
will be detected more quickly, but risks triggering failover too
aggressively in the case of a transient error or network blip.
</description>
</property>
<property>
<name>ha.zookeeper.parent-znode</name>
<value>/hadoop-ha</value>
<description>
The ZooKeeper znode under which the ZK failover controller stores
its information. Note that the nameservice ID is automatically
appended to this znode, so it is not normally necessary to
configure this, even in a federated environment.
</description>
</property>
<property>
<name>ha.zookeeper.acl</name>
<value>world:anyone:rwcda</value>
<description>
A comma-separated list of ZooKeeper ACLs to apply to the znodes
used by automatic failover. These ACLs are specified in the same
format as used by the ZooKeeper CLI.
If the ACL itself contains secrets, you may instead specify a
path to a file, prefixed with the '@' symbol, and the value of
this configuration will be loaded from within.
</description>
</property>
<property>
<name>ha.zookeeper.auth</name>
<value></value>
<description>
A comma-separated list of ZooKeeper authentications to add when
connecting to ZooKeeper. These are specified in the same format
as used by the &quot;addauth&quot; command in the ZK CLI. It is
important that the authentications specified here are sufficient
to access znodes with the ACL specified in ha.zookeeper.acl.
If the auths contain secrets, you may instead specify a
path to a file, prefixed with the '@' symbol, and the value of
this configuration will be loaded from within.
</description>
</property>
<!-- SSLFactory configuration -->
<property>
<name>hadoop.ssl.keystores.factory.class</name>
<value>org.apache.hadoop.security.ssl.FileBasedKeyStoresFactory</value>
<description>
The keystores factory to use for retrieving certificates.
</description>
</property>
<property>
<name>hadoop.ssl.require.client.cert</name>
<value>false</value>
<description>Whether client certificates are required</description>
</property>
<property>
<name>hadoop.ssl.hostname.verifier</name>
<value>DEFAULT</value>
<description>
The hostname verifier to provide for HttpsURLConnections.
Valid values are: DEFAULT, STRICT, STRICT_I6, DEFAULT_AND_LOCALHOST and
ALLOW_ALL
</description>
</property>
<property>
<name>hadoop.ssl.server.conf</name>
<value>ssl-server.xml</value>
<description>
Resource file from which ssl server keystore information will be extracted.
This file is looked up in the classpath, typically it should be in Hadoop
conf/ directory.
</description>
</property>
<property>
<name>hadoop.ssl.client.conf</name>
<value>ssl-client.xml</value>
<description>
Resource file from which ssl client keystore information will be extracted
This file is looked up in the classpath, typically it should be in Hadoop
conf/ directory.
</description>
</property>
<property>
<name>hadoop.ssl.enabled</name>
<value>false</value>
<description>
Whether to use SSL for the HTTP endpoints. If set to true, the
NameNode, DataNode, ResourceManager, NodeManager, HistoryServer and
MapReduceAppMaster web UIs will be served over HTTPS instead HTTP.
</description>
</property>
<property>
<name>hadoop.jetty.logs.serve.aliases</name>
<value>true</value>
<description>
Enable/Disable aliases serving from jetty
</description>
</property>
<property>
<name>fs.permissions.umask-mode</name>
<value>022</value>
<description>
The umask used when creating files and directories.
Can be in octal or in symbolic. Examples are:
"022" (octal for u=rwx,g=r-x,o=r-x in symbolic),
or "u=rwx,g=rwx,o=" (symbolic for 007 in octal).
</description>
</property>
<!-- ha properties -->
<property>
<name>ha.health-monitor.connect-retry-interval.ms</name>
<value>1000</value>
<description>
How often to retry connecting to the service.
</description>
</property>
<property>
<name>ha.health-monitor.check-interval.ms</name>
<value>1000</value>
<description>
How often to check the service.
</description>
</property>
<property>
<name>ha.health-monitor.sleep-after-disconnect.ms</name>
<value>1000</value>
<description>
How long to sleep after an unexpected RPC error.
</description>
</property>
<property>
<name>ha.health-monitor.rpc-timeout.ms</name>
<value>45000</value>
<description>
Timeout for the actual monitorHealth() calls.
</description>
</property>
<property>
<name>ha.failover-controller.new-active.rpc-timeout.ms</name>
<value>60000</value>
<description>
Timeout that the FC waits for the new active to become active
</description>
</property>
<property>
<name>ha.failover-controller.graceful-fence.rpc-timeout.ms</name>
<value>5000</value>
<description>
Timeout that the FC waits for the old active to go to standby
</description>
</property>
<property>
<name>ha.failover-controller.graceful-fence.connection.retries</name>
<value>1</value>
<description>
FC connection retries for graceful fencing
</description>
</property>
<property>
<name>ha.failover-controller.cli-check.rpc-timeout.ms</name>
<value>20000</value>
<description>
Timeout that the CLI (manual) FC waits for monitorHealth, getServiceState
</description>
</property>
</configuration>