/*
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 */


#ifndef _GUAC_TERMINAL_H
#define _GUAC_TERMINAL_H

#include "config.h"

#include "buffer.h"
#include "common/clipboard.h"
#include "common/cursor.h"
#include "display.h"
#include "scrollbar.h"
#include "types.h"
#include "typescript.h"

#include <pthread.h>
#include <stdbool.h>

#include <guacamole/client.h>
#include <guacamole/stream.h>

/**
 * The absolute maximum number of rows to allow within the display.
 */
#define GUAC_TERMINAL_MAX_ROWS 1024

/**
 * The absolute maximum number of columns to allow within the display. This
 * implicitly limits the number of columns allowed within the buffer.
 */
#define GUAC_TERMINAL_MAX_COLUMNS 1024

/**
 * The maximum duration of a single frame, in milliseconds.
 */
#define GUAC_TERMINAL_FRAME_DURATION 40

/**
 * The maximum amount of time to wait for more data before declaring a frame
 * complete, in milliseconds.
 */
#define GUAC_TERMINAL_FRAME_TIMEOUT 10

/**
 * The maximum number of custom tab stops.
 */
#define GUAC_TERMINAL_MAX_TABS       16

/**
 * The number of rows to scroll per scroll wheel event.
 */
#define GUAC_TERMINAL_WHEEL_SCROLL_AMOUNT 3

/**
 * Flag which specifies that terminal output should be sent to both the current
 * pipe stream and the user's display. By default, terminal output will be sent
 * only to the open pipe.
 */
#define GUAC_TERMINAL_PIPE_INTERPRET_OUTPUT 1

/**
 * Flag which forces the open pipe stream to be flushed automatically, whenever
 * a new frame would be rendered, with only minimal buffering performed between
 * frames. By default, the contents of the pipe stream will be flushed only
 * when the buffer is full or the pipe stream is being closed.
 */
#define GUAC_TERMINAL_PIPE_AUTOFLUSH 2

typedef struct guac_terminal guac_terminal;

/**
 * All possible mouse cursors used by the terminal emulator.
 */
typedef enum guac_terminal_cursor_type {

    /**
     * A transparent (blank) cursor.
     */
    GUAC_TERMINAL_CURSOR_BLANK,

    /**
     * A standard I-bar cursor for selecting text, etc.
     */
    GUAC_TERMINAL_CURSOR_IBAR,

    /**
     * A standard triangular mouse pointer for manipulating non-text objects.
     */
    GUAC_TERMINAL_CURSOR_POINTER

} guac_terminal_cursor_type;

/**
 * Handler for characters printed to the terminal. When a character is printed,
 * the current char handler for the terminal is called and given that
 * character.
 */
typedef int guac_terminal_char_handler(guac_terminal* term, unsigned char c);

/**
 * Handler for setting the destination path for file uploads.
 */
typedef void guac_terminal_upload_path_handler(guac_client* client, char* path);

/**
 * Handler for creating an outbound file download stream for a specified file.
 */
typedef guac_stream* guac_terminal_file_download_handler(guac_client* client, char* filename);

/**
 * Represents a terminal emulator which uses a given Guacamole client to
 * render itself.
 */
struct guac_terminal {

    /**
     * The Guacamole client associated with this terminal emulator.
     */
    guac_client* client;

    /**
     * Whether user input should be handled and this terminal should render
     * frames. Initially, this will be false, user input will be ignored, and
     * rendering of frames will be withheld until guac_terminal_start() has
     * been invoked. The data within frames will still be rendered, and text
     * data received will still be handled, however actual frame boundaries
     * will not be sent.
     */
    bool started;

    /**
     * The terminal render thread.
     */
    pthread_t thread;

    /**
     * Called whenever the necessary terminal codes are sent to change
     * the path for future file uploads.
     */
    guac_terminal_upload_path_handler* upload_path_handler;

    /**
     * Called whenever the necessary terminal codes are sent to initiate
     * a download of a given remote file.
     */
    guac_terminal_file_download_handler* file_download_handler;

    /**
     * Lock which restricts simultaneous access to this terminal via the root
     * guac_terminal_* functions.
     */
    pthread_mutex_t lock;

    /**
     * The mutex associated with the modified condition and flag, locked
     * whenever a thread is waiting on the modified condition, the modified
     * condition is being signalled, or the modified flag is being changed.
     */
    pthread_mutex_t modified_lock;

    /**
     * Flag set whenever an operation has affected the terminal in a way that
     * will require a frame flush. When this flag is set, the modified_cond
     * condition will be signalled. The modified_lock will always be
     * acquired before this flag is altered.
     */
    int modified;

    /**
     * Condition which is signalled when the modified flag has been set
     */
    pthread_cond_t modified_cond;

    /**
     * Pipe which will be the source of user input. When a terminal code
     * generates synthesized user input, that data will be written to
     * this pipe.
     */
    int stdin_pipe_fd[2];

    /**
     * The currently-open pipe stream from which all terminal input should be
     * read, if any. If no pipe stream is open, terminal input will be received
     * through keyboard, clipboard, and mouse events, and this value will be
     * NULL.
     */
    guac_stream* input_stream;

    /**
     * The currently-open pipe stream to which all terminal output should be
     * written, if any. If no pipe stream is open, terminal output will be
     * written to the terminal display, and this value will be NULL.
     */
    guac_stream* pipe_stream;

    /**
     * Bitwise OR of all flags which apply to the currently-open pipe stream.
     * If no pipe stream is open, this value has no meaning, and its contents
     * are undefined.
     *
     * @see GUAC_TERMINAL_PIPE_INTERPRET_OUTPUT
     * @see GUAC_TERMINAL_PIPE_AUTOFLUSH
     */
    int pipe_stream_flags;

    /**
     * Buffer of data pending write to the pipe_stream. Data within this buffer
     * will be flushed to the pipe_stream when either (1) the buffer is full
     * and another character needs to be written or (2) the pipe_stream is
     * closed.
     */
    char pipe_buffer[6048];

    /**
     * The number of bytes currently stored within the pipe_buffer.
     */
    int pipe_buffer_length;

    /**
     * The currently-active typescript recording all terminal output, or NULL
     * if no typescript is being used for the terminal session.
     */
    guac_terminal_typescript* typescript;

    /**
     * Terminal-wide mouse cursor, synchronized across all users.
     */
    guac_common_cursor* cursor;

    /**
     * Graphical representation of the current scroll state.
     */
    guac_terminal_scrollbar* scrollbar;

    /**
     * The relative offset of the display. A positive value indicates that
     * many rows have been scrolled into view, zero indicates that no
     * scrolling has occurred. Negative values are illegal.
     */
    int scroll_offset;

    /**
     * The maximum number of rows to allow within the terminal buffer. Note
     * that while this value is traditionally referred to as the scrollback
     * size, it actually encompasses both the display and the off-screen
     * region. The terminal will ensure enough buffer space is allocated for
     * the on-screen rows, even if this exceeds the defined maximum, however
     * additional rows for off-screen data will only be available if the
     * display is smaller than this value.
     */
    int max_scrollback;

    /**
     * The number of rows that the user has requested be avalable within the
     * terminal buffer. This value may be adjusted by the user while the
     * terminal is running through console codes, and will adjust the number
     * of rows available within the terminal buffer, subject to the maximum
     * defined at terminal creation and stored within max_scrollback.
     */
    int requested_scrollback;

    /**
     * The width of the space available to all components of the terminal, in
     * pixels. This may include space which will not actually be used for
     * character rendering.
     */
    int outer_width;

    /**
     * The height of the space available to all components of the terminal, in
     * pixels. This may include space which will not actually be used for
     * character rendering.
     */
    int outer_height;

    /**
     * The width of the terminal, in pixels.
     */
    int width;

    /**
     * The height of the terminal, in pixels.
     */
    int height;

    /**
     * The width of the terminal, in characters.
     */
    int term_width;

    /**
     * The height of the terminal, in characters.
     */
    int term_height;

    /**
     * The index of the first row in the scrolling region.
     */
    int scroll_start;

    /**
     * The index of the last row in the scrolling region.
     */
    int scroll_end;

    /**
     * The current row location of the cursor. Note that while most terminal
     * operations will clip the cursor location within the bounds of the
     * terminal, this is not guaranteed.
     */
    int cursor_row;

    /**
     * The current column location of the cursor. Note that while most
     * terminal operations will clip the cursor location within the bounds
     * of the terminal, this is not guaranteed. There are times when the
     * cursor is legitimately outside the terminal bounds (such as when the
     * end of a line is reached, but it is not yet necessary to scroll up).
     */
    int cursor_col;

    /**
     * The desired visibility state of the cursor.
     */
    bool cursor_visible;

    /**
     * The row of the rendered cursor.
     * Will be set to -1 if the cursor is not visible.
     */
    int visible_cursor_row;

    /**
     * The column of the rendered cursor.
     * Will be set to -1 if the cursor is not visible.
     */
    int visible_cursor_col;

    /**
     * The row of the saved cursor (ESC 7).
     */
    int saved_cursor_row;

    /**
     * The column of the saved cursor (ESC 7).
     */
    int saved_cursor_col;

    /**
     * The attributes which will be applied to future characters.
     */
    guac_terminal_attributes current_attributes;

    /**
     * The character whose attributes dictate the default attributes
     * of all characters. When new screen space is allocated, this
     * character fills the gaps.
     */
    guac_terminal_char default_char;

    /**
     * Handler which will receive all printed characters, updating the terminal
     * accordingly.
     */
    guac_terminal_char_handler* char_handler;

    /**
     * The difference between the currently-rendered screen and the current
     * state of the terminal, and the contextual information necessary to
     * interpret and render those differences.
     */
    guac_terminal_display* display;

    /**
     * Current terminal display state. All characters present on the screen
     * are within this buffer. This has nothing to do with the display, which
     * facilitates transfer of a set of changes to the remote display.
     */
    guac_terminal_buffer* buffer;

    /**
     * Automatically place a tabstop every N characters. If zero, then no
     * tabstops exist automatically.
     */
    int tab_interval;

    /**
     * Array of all tabs set. Each entry is the column number of a tab + 1,
     * or 0 if that tab cell is unset.
     */
    int custom_tabs[GUAC_TERMINAL_MAX_TABS];

    /**
     * Array of arrays of mapped characters, where the character N is located at the N-32
     * position within the array. Each element in a contained array is the corresponding Unicode
     * codepoint. If NULL, a direct mapping from Unicode is used. The entries of the main array
     * correspond to the character set in use (G0, G1, etc.)
     */
    const int* char_mapping[2];

    /**
     * The active character set. For example, 0 for G0, 1 for G1, etc.
     */
    int active_char_set;

    /**
     * Whether text is currently selected.
     */
    bool text_selected;

    /**
     * Whether the selection is finished, and will no longer be modified. A
     * committed selection remains highlighted for reference, but the
     * highlight will be removed if characters within the selected region are
     * modified.
     */
    bool selection_committed;

    /**
     * The row that the selection starts at.
     */
    int selection_start_row;

    /**
     * The column that the selection starts at.
     */
    int selection_start_column;

    /**
     * The width of the character at selection start.
     */
    int selection_start_width;

    /**
     * The row that the selection ends at.
     */
    int selection_end_row;

    /**
     * The column that the selection ends at.
     */
    int selection_end_column;

    /**
     * The width of the character at selection end.
     */
    int selection_end_width;

    /**
     * Whether the cursor (arrow) keys should send cursor sequences
     * or application sequences (DECCKM).
     */
    bool application_cursor_keys;

    /**
     * Whether a CR should automatically follow a LF, VT, or FF.
     */
    bool automatic_carriage_return;

    /**
     * Whether insert mode is enabled (DECIM).
     */
    bool insert_mode;

    /**
     * Whether the alt key is currently being held down.
     */
    int mod_alt;

    /**
     * Whether the control key is currently being held down.
     */
    int mod_ctrl;

    /**
     * Whether the shift key is currently being held down.
     */
    int mod_shift;

    /**
     * The current mouse button state.
     */
    int mouse_mask;

    /**
     * The current mouse cursor, to avoid re-setting the cursor image.
     */
    guac_terminal_cursor_type current_cursor;

    /**
     * The current contents of the clipboard. This clipboard instance is
     * maintained externally (will not be freed when this terminal is freed)
     * and will be updated both internally by the terminal and externally
     * through received clipboard instructions.
     */
    guac_common_clipboard* clipboard;

    /**
     * The name of the font to use when rendering glyphs, as requested at
     * creation time or via guac_terminal_apply_font().
     */
    const char* font_name;

    /**
     * The size of each glyph, in points, as requested at creation time or via
     * guac_terminal_apply_font().
     */
    int font_size;

    /**
     * The name of the color scheme to use, as requested at creation time or
     * via guac_terminal_apply_color_scheme(). This string must be in the
     * format accepted by guac_terminal_parse_color_scheme().
     */
    const char* color_scheme;

    /**
     * ASCII character to send when backspace is pressed.
     */
    char backspace;

    /**
     * Whether copying from the terminal clipboard should be blocked. If set,
     * the contents of the terminal can still be copied, but will be usable
     * only within the terminal itself. The clipboard contents will not be
     * automatically streamed to the client.
     */
    bool disable_copy;

};

/**
 * Creates a new guac_terminal, having the given width and height, and
 * rendering to the given client. As failover mechanisms and the Guacamole
 * client implementation typically use the receipt of a "sync" message to
 * denote successful connection, rendering of frames (sending of "sync") will
 * be withheld until guac_terminal_start() is called, and user input will be
 * ignored. The guac_terminal_start() function should be invoked only after
 * either the underlying connection has truly succeeded, or until visible
 * terminal output or user input is required.
 *
 * @param client
 *     The client to which the terminal will be rendered.
 *
 * @param clipboard
 *     The guac_common_clipboard which will contain the current clipboard
 *     state. It is expected that this clipboard instance will be updated
 *     both internally by the terminal and externally through received
 *     clipboard instructions. This clipboard will not be automatically
 *     freed when this terminal is freed.
 *
 * @param disable_copy
 *     Whether copying from the terminal clipboard should be blocked. If set,
 *     the contents of the terminal can still be copied, but will be usable
 *     only within the terminal itself. The clipboard contents will not be
 *     automatically streamed to the client.
 *
 * @param max_scrollback
 *     The maximum number of rows to allow within the scrollback buffer. The
 *     user may still alter the size of the scrollback buffer using terminal
 *     codes, however the size can never exceed the maximum size given here.
 *     Note that this space is shared with the display, with the scrollable
 *     area actually only containing the given number of rows less the number
 *     of rows currently displayed, and sufficient buffer space will always be
 *     allocated to represent the display area of the terminal regardless of
 *     the value given here.
 *
 * @param font_name
 *     The name of the font to use when rendering glyphs.
 *
 * @param font_size
 *     The size of each glyph, in points.
 *
 * @param dpi
 *     The DPI of the display. The given font size will be adjusted to produce
 *     glyphs at the given DPI.
 *
 * @param width
 *     The width of the terminal, in pixels.
 *
 * @param height
 *     The height of the terminal, in pixels.
 *
 * @param color_scheme
 *     The name of the color scheme to use. This string must be in the format
 *     accepted by guac_terminal_parse_color_scheme().
 *
 * @param backspace
 *     The integer ASCII code to send when backspace is pressed in
 *     this terminal.
 *
 * @return
 *     A new guac_terminal having the given font, dimensions, and attributes
 *     which renders all text to the given client.
 */
guac_terminal* guac_terminal_create(guac_client* client,
        guac_common_clipboard* clipboard, bool disable_copy,
        int max_scrollback, const char* font_name, int font_size, int dpi,
        int width, int height, const char* color_scheme,
        const int backspace);

/**
 * Frees all resources associated with the given terminal.
 */
void guac_terminal_free(guac_terminal* term);

/**
 * Renders a single frame of terminal data. If data is not yet available,
 * this function will block until data is written.
 */
int guac_terminal_render_frame(guac_terminal* terminal);

/**
 * Reads from this terminal's STDIN. Input comes from key and mouse events
 * supplied by calls to guac_terminal_send_key(),
 * guac_terminal_send_mouse(), and guac_terminal_send_stream(). If input is not
 * yet available, this function will block.
 */
int guac_terminal_read_stdin(guac_terminal* terminal, char* c, int size);

/**
 * Notifies the terminal that rendering should begin and that user input should
 * now be accepted. This function must be invoked following terminal creation
 * for the end of frames to be signalled with "sync" messages. Until this
 * function is invoked, "sync" messages will be withheld.
 *
 * @param term
 *     The terminal to start.
 */
void guac_terminal_start(guac_terminal* term);

/**
 * Manually stop the terminal to forcibly unblock any pending reads/writes,
 * e.g. forcing guac_terminal_read_stdin() to return and cease all terminal I/O.
 *
 * @param term
 *     The terminal to stop.
 */
void guac_terminal_stop(guac_terminal* term);

/**
 * Notifies the terminal that an event has occurred and the terminal should
 * flush itself when reasonable.
 *
 * @param terminal
 *     The terminal to notify.
 */
void guac_terminal_notify(guac_terminal* terminal);

/**
 * Reads a single line from this terminal's STDIN, storing the result in a
 * newly-allocated string. Input is retrieved in the same manner as
 * guac_terminal_read_stdin() and the same restrictions apply. As reading input
 * naturally requires user interaction, this function will implicitly invoke
 * guac_terminal_start().
 *
 * @param terminal
 *     The terminal to which the provided title should be output, and from
 *     whose STDIN the single line of input should be read.
 *
 * @param title
 *     The human-readable title to output to the terminal just prior to reading
 *     from STDIN.
 *
 * @param echo
 *     Non-zero if the characters read from STDIN should be echoed back as
 *     terminal output, or zero if asterisks should be displayed instead.
 *
 * @return
 *     A newly-allocated string containing a single line of input read from the
 *     provided terminal's STDIN. This string must eventually be manually
 *     freed with a call to free().
 */
char* guac_terminal_prompt(guac_terminal* terminal, const char* title,
        bool echo);

/**
 * Writes the given format string and arguments to this terminal's STDOUT in
 * the same manner as printf(). This function may block until space is
 * freed in the output buffer by guac_terminal_render_frame().
 */
int guac_terminal_printf(guac_terminal* terminal, const char* format, ...);

/**
 * Handles the given key event, sending data, scrolling, pasting clipboard
 * data, etc. as necessary. If terminal input is currently coming from a
 * stream due to a prior call to guac_terminal_send_stream(), any input
 * which would normally result from the key event is dropped.
 *
 * @param term
 *     The terminal which should receive the given data on STDIN.
 *
 * @param keysym
 *     The X11 keysym of the key that was pressed or released.
 *
 * @param pressed
 *     Non-zero if the key represented by the given keysym is currently
 *     pressed, zero if it is released.
 *
 * @return
 *     Zero if the key event was handled successfully, non-zero otherwise.
 */
int guac_terminal_send_key(guac_terminal* term, int keysym, int pressed);

/**
 * Handles the given mouse event, sending data, scrolling, pasting clipboard
 * data, etc. as necessary. If terminal input is currently coming from a
 * stream due to a prior call to guac_terminal_send_stream(), any input
 * which would normally result from the mouse event is dropped.
 *
 * @param term
 *     The terminal which should receive the given data on STDIN.
 *
 * @param user
 *     The user that originated the mouse event.
 *
 * @param x
 *     The X coordinate of the mouse within the display when the event
 *     occurred, in pixels. This value is not guaranteed to be within the
 *     bounds of the display area.
 *
 * @param y
 *     The Y coordinate of the mouse within the display when the event
 *     occurred, in pixels. This value is not guaranteed to be within the
 *     bounds of the display area.
 *
 * @param mask
 *     An integer value representing the current state of each button, where
 *     the Nth bit within the integer is set to 1 if and only if the Nth mouse
 *     button is currently pressed. The lowest-order bit is the left mouse
 *     button, followed by the middle button, right button, and finally the up
 *     and down buttons of the scroll wheel.
 *
 *     @see GUAC_CLIENT_MOUSE_LEFT
 *     @see GUAC_CLIENT_MOUSE_MIDDLE
 *     @see GUAC_CLIENT_MOUSE_RIGHT
 *     @see GUAC_CLIENT_MOUSE_SCROLL_UP
 *     @see GUAC_CLIENT_MOUSE_SCROLL_DOWN
 *
 * @return
 *     Zero if the mouse event was handled successfully, non-zero otherwise.
 */
int guac_terminal_send_mouse(guac_terminal* term, guac_user* user,
        int x, int y, int mask);

/**
 * Initializes the handlers of the given guac_stream such that it serves as the
 * source of input to the terminal. Other input sources will be temporarily
 * ignored until the stream is closed through receiving an "end" instruction.
 * If input is already being read from a stream due to a prior call to
 * guac_terminal_send_stream(), the prior call will remain in effect and this
 * call will fail.
 *
 * Calling this function will overwrite the data member of the given
 * guac_stream.
 *
 * @param term
 *     The terminal emulator which should receive input from the given stream.
 *
 * @param user
 *     The user that opened the stream.
 *
 * @param stream
 *     The guac_stream which should serve as the source of input for the
 *     terminal.
 *
 * @return
 *     Zero if the terminal input has successfully been configured to read from
 *     the given stream, non-zero otherwise.
 */
int guac_terminal_send_stream(guac_terminal* term, guac_user* user,
        guac_stream* stream);

/**
 * Handles a scroll event received from the scrollbar associated with a
 * terminal.
 *
 * @param scrollbar
 *     The scrollbar that has been scrolled.
 *
 * @param value
 *     The new value that should be stored within the scrollbar, and
 *     represented within the terminal display.
 */
void guac_terminal_scroll_handler(guac_terminal_scrollbar* scrollbar, int value);

/**
 * Replicates the current display state to a user that has just joined the
 * connection. All instructions necessary to replicate state are sent over the
 * given socket.
 *
 * @param term
 *     The terminal emulator associated with the connection being joined.
 *
 * @param user
 *     The user joining the connection.
 *
 * @param socket
 *     The guac_socket specific to the joining user and across which messages
 *     synchronizing the current display state should be sent.
 */
void guac_terminal_dup(guac_terminal* term, guac_user* user,
        guac_socket* socket);

/* INTERNAL FUNCTIONS */


/**
 * Acquires exclusive access to the terminal. Note that enforcing this
 * exclusive access requires that ALL users of the terminal call this
 * function before making further calls to the terminal.
 */
void guac_terminal_lock(guac_terminal* terminal);

/**
 * Releases exclusive access to the terminal.
 */
void guac_terminal_unlock(guac_terminal* terminal);

/**
 * Resets the state of the given terminal, as if it were just allocated.
 */
void guac_terminal_reset(guac_terminal* term);

/**
 * Writes the given string of characters to the terminal.
 */
int guac_terminal_write(guac_terminal* term, const char* c, int size);

/**
 * Sets the character at the given row and column to the specified value.
 */
int guac_terminal_set(guac_terminal* term, int row, int col, int codepoint);

/**
 * Clears the given region within a single row.
 */
int guac_terminal_clear_columns(guac_terminal* term,
        int row, int start_col, int end_col);

/**
 * Clears the given region from right-to-left, top-to-bottom, replacing
 * all characters with the current background color and attributes.
 */
int guac_terminal_clear_range(guac_terminal* term,
        int start_row, int start_col,
        int end_row, int end_col);

/**
 * Scrolls the terminal's current scroll region up by one row.
 */
int guac_terminal_scroll_up(guac_terminal* term,
        int start_row, int end_row, int amount);

/**
 * Scrolls the terminal's current scroll region down by one row.
 */
int guac_terminal_scroll_down(guac_terminal* term,
        int start_row, int end_row, int amount);

/**
 * Commits the current cursor location, updating the visible cursor
 * on the screen.
 */
void guac_terminal_commit_cursor(guac_terminal* term);

/**
 * Scroll down the display by the given amount, replacing the new space with
 * data from the buffer. If not enough data is available, the maximum
 * amount will be scrolled.
 */
void guac_terminal_scroll_display_down(guac_terminal* terminal, int amount);

/**
 * Scroll up the display by the given amount, replacing the new space with data
 * from either the buffer or the terminal buffer.  If not enough data is
 * available, the maximum amount will be scrolled.
 */
void guac_terminal_scroll_display_up(guac_terminal* terminal, int amount);

/* LOW-LEVEL TERMINAL OPERATIONS */


/**
 * Copies the given range of columns to a new location, offset from
 * the original by the given number of columns.
 */
void guac_terminal_copy_columns(guac_terminal* terminal, int row,
        int start_column, int end_column, int offset);

/**
 * Copies the given range of rows to a new location, offset from the
 * original by the given number of rows.
 */
void guac_terminal_copy_rows(guac_terminal* terminal,
        int start_row, int end_row, int offset);

/**
 * Sets the given range of columns within the given row to the given
 * character.
 */
void guac_terminal_set_columns(guac_terminal* terminal, int row,
        int start_column, int end_column, guac_terminal_char* character);

/**
 * Resize the terminal to the given dimensions.
 */
int guac_terminal_resize(guac_terminal* term, int width, int height);

/**
 * Flushes all pending operations within the given guac_terminal.
 */
void guac_terminal_flush(guac_terminal* terminal);

/**
 * Sends the given string as if typed by the user. If terminal input is
 * currently coming from a stream due to a prior call to
 * guac_terminal_send_stream(), any input which would normally result from
 * invoking this function is dropped.
 *
 * @param term
 *     The terminal which should receive the given data on STDIN.
 *
 * @param data
 *     The data the terminal should receive on STDIN.
 *
 * @param length
 *     The size of the given data, in bytes.
 *
 * @return
 *     The number of bytes written to STDIN, or a negative value if an error
 *     occurs preventing the data from being written. This should always be
 *     the size of the data given unless data is intentionally dropped.
 */
int guac_terminal_send_data(guac_terminal* term, const char* data, int length);

/**
 * Sends the given string as if typed by the user. If terminal input is
 * currently coming from a stream due to a prior call to
 * guac_terminal_send_stream(), any input which would normally result from
 * invoking this function is dropped. 
 *
 * @param term
 *     The terminal which should receive the given data on STDIN.
 *
 * @param data
 *     The data the terminal should receive on STDIN.
 *
 * @return
 *     The number of bytes written to STDIN, or a negative value if an error
 *     occurs preventing the data from being written. This should always be
 *     the size of the data given unless data is intentionally dropped.
 */
int guac_terminal_send_string(guac_terminal* term, const char* data);

/**
 * Sends data through STDIN as if typed by the user, using the format string
 * given and any args (similar to printf). If terminal input is currently
 * coming from a stream due to a prior call to guac_terminal_send_stream(), any
 * input which would normally result from invoking this function is dropped.
 *
 * @param term
 *     The terminal which should receive the given data on STDIN.
 *
 * @param format
 *     A printf-style format string describing the data to be received on
 *     STDIN.
 *
 * @param ...
 *     Any srguments to use when filling the format string.
 *
 * @return
 *     The number of bytes written to STDIN, or a negative value if an error
 *     occurs preventing the data from being written. This should always be
 *     the size of the data given unless data is intentionally dropped.
 */
int guac_terminal_sendf(guac_terminal* term, const char* format, ...);

/**
 * Sets a tabstop in the given column.
 */
void guac_terminal_set_tab(guac_terminal* term, int column);

/**
 * Removes the tabstop at the given column.
 */
void guac_terminal_unset_tab(guac_terminal* term, int column);

/**
 * Removes all tabstops.
 */
void guac_terminal_clear_tabs(guac_terminal* term);

/**
 * Given a column within the given terminal, returns the location of the
 * next tabstop (or the rightmost character, if no more tabstops exist).
 */
int guac_terminal_next_tab(guac_terminal* term, int column);

/**
 * Opens a new pipe stream, redirecting all output from the given terminal to
 * that pipe stream. If a pipe stream is already open, that pipe stream will
 * be flushed and closed prior to opening the new pipe stream.
 *
 * @param term
 *     The terminal which should redirect output to a new pipe stream having
 *     the given name.
 *
 * @param name
 *     The name of the pipe stream to open.
 *
 * @param flags
 *     A bitwise OR of all integer flags which should apply to the new pipe
 *     stream.
 *
 *     @see GUAC_TERMINAL_PIPE_INTERPRET_OUTPUT
 *     @see GUAC_TERMINAL_PIPE_AUTOFLUSH
 */
void guac_terminal_pipe_stream_open(guac_terminal* term, const char* name,
        int flags);

/**
 * Writes a single byte of data to the pipe stream currently open and
 * associated with the given terminal. The pipe stream must already have been
 * opened via guac_terminal_pipe_stream_open(). If no pipe stream is currently
 * open, this function has no effect. Data written through this function may
 * be buffered.
 *
 * @param term
 *     The terminal whose currently-open pipe stream should be written to.
 *
 * @param c
 *     The byte of data to write to the pipe stream.
 */
void guac_terminal_pipe_stream_write(guac_terminal* term, char c);

/**
 * Flushes any data currently buffered for the currently-open pipe stream
 * associated with the given terminal. The pipe stream must already have been
 * opened via guac_terminal_pipe_stream_open(). If no pipe stream is currently
 * open or no data is in the buffer, this function has no effect.
 *
 * @param term
 *     The terminal whose pipe stream buffer should be flushed.
 */
void guac_terminal_pipe_stream_flush(guac_terminal* term);

/**
 * Closes the currently-open pipe stream associated with the given terminal,
 * redirecting all output back to the terminal display.  Any data currently
 * buffered for output to the pipe stream will be flushed prior to closure. The
 * pipe stream must already have been opened via
 * guac_terminal_pipe_stream_open(). If no pipe stream is currently open, this
 * function has no effect.
 *
 * @param term
 *     The terminal whose currently-open pipe stream should be closed.
 */
void guac_terminal_pipe_stream_close(guac_terminal* term);

/**
 * Requests that the terminal write all output to a new pair of typescript
 * files within the given path and using the given base name. Terminal output
 * will be written to these new files, along with timing information. If the
 * create_path flag is non-zero, the given path will be created if it does not
 * yet exist. If creation of the typescript files or path fails, error messages
 * will automatically be logged, and no typescript will be written. The
 * typescript will automatically be closed once the terminal is freed.
 *
 * @param term
 *     The terminal whose output should be written to a typescript.
 *
 * @param path
 *     The full absolute path to a directory in which the typescript files
 *     should be created.
 *
 * @param name
 *     The base name to use for the typescript files created within the
 *     specified path.
 *
 * @param create_path
 *     Zero if the specified path MUST exist for typescript files to be
 *     written, or non-zero if the path should be created if it does not yet
 *     exist.
 *
 * @return
 *     Zero if the typescript files have been successfully created and a
 *     typescript will be written, non-zero otherwise.
 */
int guac_terminal_create_typescript(guac_terminal* term, const char* path,
        const char* name, int create_path);

/**
 * Returns the number of rows within the buffer of the given terminal which are
 * not currently displayed on screen. Adjustments to the desired scrollback
 * size are taken into account, and rows which are within the buffer but
 * unavailable due to being outside the desired scrollback range are ignored.
 *
 * @param term
 *     The terminal whose off-screen row count should be determined.
 *
 * @return
 *     The number of rows within the buffer which are not currently displayed
 *     on screen.
 */
int guac_terminal_available_scroll(guac_terminal* term);

/**
 * Immediately applies the given color scheme to the given terminal, overriding
 * the color scheme provided when the terminal was created. Valid color schemes
 * are those accepted by guac_terminal_parse_color_scheme().
 *
 * @param terminal
 *     The terminal to apply the color scheme to.
 *
 * @param color_scheme
 *     The color scheme to apply.
 */
void guac_terminal_apply_color_scheme(guac_terminal* terminal,
        const char* color_scheme);

/**
 * Alters the font of the terminal. The terminal will automatically be redrawn
 * and resized as necessary. If the terminal size changes, the remote side of
 * the terminal session must be manually informed of that change or graphical
 * artifacts may result.
 *
 * @param terminal
 *     The terminal whose font family and/or size are being changed.
 *
 * @param font_name
 *     The name of the new font family, or NULL if the font family should
 *     remain unchanged.
 *
 * @param font_size
 *     The new font size, in points, or -1 if the font size should remain
 *     unchanged.
 *
 * @param dpi
 *     The resolution of the display in DPI. If the font size will not be
 *     changed (the font size given is -1), this value is ignored.
 */
void guac_terminal_apply_font(guac_terminal* terminal, const char* font_name,
        int font_size, int dpi);

#endif