To run integration tests, you have to specify the druid cluster the tests should use.
Druid comes with the mvn profile integration-tests for setting up druid running in docker containers, and using that cluster to run the integration tests.
To use a druid cluster that is already running, use the mvn profile int-tests-config-file, which uses a configuration file describing the cluster.
Before starting, if you don't already have docker on your machine, install it as described on Docker installation instructions. Ensure that you have at least 4GB of memory allocated to the docker engine. (You can verify it under Preferences > Advanced.)
Also set the DOCKER_IP environment variable to localhost on your system, as follows:
export DOCKER_IP=127.0.0.1
To run all tests from a test group using docker and mvn run the following command: (list of test groups can be found at integration-tests/src/test/java/org/apache/druid/tests/TestNGGroup.java)
mvn verify -P integration-tests -Dgroups=<test_group>
To run only a single test using mvn run the following command:
mvn verify -P integration-tests -Dit.test=<test_name>
Add -rf :druid-integration-tests when running integration tests for the second time or later without changing the code of core modules in between to skip up-to-date checks for the whole module dependency tree.
Integration tests can also be run with either Java 8 or Java 11 by adding -Djvm.runtime=# to mvn command, where # can either be 8 or 11.
Druid's configuration (using Docker) can be overrided by providing -Doverride.config.path=<PATH_TO_FILE>. The file must contain one property per line, the key must start with druid_ and the format should be snake case. Note that when bringing up docker containers through mvn and -Doverride.config.path is provided, additional Druid routers for security group integration test (permissive tls, no client auth tls, custom check tls) will not be started.
Docker compose yamls located in “docker” folder
docker-compose.base.yml - Base file that defines all containers for integration test
docker-compose.yml - Defines Druid cluster with default configuration that is used for running integration tests in Travis CI.
docker-compose -f docker-compose.yml up // DRUID_INTEGRATION_TEST_GROUP - this variable is used in Druid docker container for "security" and "query" test group. Use next docker-compose if you want to run security/query tests. DRUID_INTEGRATION_TEST_GROUP=security docker-compose -f docker-compose.yml up
docker-compose.override-env.yml - Defines Druid cluster with default configuration plus any additional and/or overriden configurations from override-env file.
// OVERRIDE_ENV - variable that must contains path to Druid configuration file OVERRIDE_ENV=./environment-configs/override-examples/s3 docker-compose -f docker-compose.override-env.yml up
docker-compose.security.yml - Defines three additional Druid router services with permissive tls, no client auth tls, and custom check tls respectively. This is meant to be use together with docker-compose.yml or docker-compose.override-env.yml and is only needed for the “security” group integration test.
docker-compose -f docker-compose.yml -f docker-compose.security.yml up
docker-compose.druid-hadoop.yml - for starting Apache Hadoop 2.8.5 cluster with the same setup as the Druid tutorial
docker-compose -f docker-compose.druid-hadoop.yml up
mvn clean install -pl integration-tests -P integration-tests -Ddocker.run.skip=true -Dmaven.test.skip=true
- Basic Druid cluster (skip this if running Druid cluster with override configs):
docker-compose -f integration-tests/docker/docker-compose.yml up
- Druid cluster with override configs (skip this if running Basic Druid cluster):
OVERRIDE_ENV=<PATH_TO_ENV> docker-compose -f ${DOCKERDIR}/docker-compose.override-env.yml up
- Druid hadoop (if needed):
docker-compose -f ${DOCKERDIR}/docker-compose.druid-hadoop.yml up
- Druid routers for security group integration test (if needed):
docker-compose -f ${DOCKERDIR}/docker-compose.security.yml up
For your convenience, Druid processes running inside Docker have debugging enabled and the following ports have been made available to attach your remote debugger (such as via IntelliJ IDEA's Remote Configuration):
When writing integration tests, it can be helpful to test against a quickstart cluster so that you can set up remote debugging with in your developer environment. This section walks you through setting up the integration tests so that it can run against a quickstart cluster running on your development machine.
NOTE: Not all features run by default on a quickstart cluster, so it may not make sense to run the entire test suite against this configuration.
NOTE: Quickstart does not run with ssl, so to trick the integration tests we specify the
*_tls_urlin the config to be the same as the http url.
Make sure you have at least 6GB of memory available before you run the tests.
The tests rely on files in the test/resources folder to exist under the path /resources, so create a symlink to make them available:
ln -s ${DRUID_HOME}/integration-tests/src/test/resources /resources
Set the cluster config file environment variable to the quickstart config:
export CONFIG_FILE=${DRUID_HOME}/integration-tests/quickstart-it.json
The test group quickstart-compatible has tests that have been verified to work against the quickstart cluster. There may be more tests that work, if you find that they do, please mark it as quickstart-compatible (TestNGGroup#QUICKSTART_COMPATIBLE) and open a PR. If you find some integration tests do not work, look at the docker files to see what setup they do. You may need to do similar steps to get the test to work.
Then run the tests using a command similar to:
mvn verify -P int-tests-config-file -Dit.test=<test_name> # Run all integration tests that have been verified to work against a quickstart cluster. mvn verify -P int-tests-config-file -Dgroups=quickstart-compatible
Make sure that you have at least 6GB of memory available before you run the tests.
To run tests on any druid cluster that is already running, create a configuration file:
{
"broker_host": "<broker_ip>",
"broker_port": "<broker_port>",
"router_host": "<router_ip>",
"router_port": "<router_port>",
"indexer_host": "<indexer_ip>",
"indexer_port": "<indexer_port>",
"coordinator_host": "<coordinator_ip>",
"coordinator_port": "<coordinator_port>",
"middlemanager_host": "<middle_manager_ip>",
"zookeeper_hosts": "<comma-separated list of zookeeper_ip:zookeeper_port>",
"cloud_bucket": "<(optional) cloud_bucket for test data if running cloud integration test>",
"cloud_path": "<(optional) cloud_path for test data if running cloud integration test>",
}
Set the environment variable CONFIG_FILE to the name of the configuration file:
export CONFIG_FILE=<config file name>
To run all tests from a test group using mvn run the following command: (list of test groups can be found at integration-tests/src/test/java/org/apache/druid/tests/TestNGGroup.java)
mvn verify -P int-tests-config-file -Dgroups=<test_group>
To run only a single test using mvn run the following command:
mvn verify -P int-tests-config-file -Dit.test=<test_name>
The integration test that indexes from Cloud or uses Cloud as deep storage is not run as part of the integration test run discussed above. Running these tests requires the user to provide their own Cloud.
Currently, the integration test supports Amazon Kinesis, Google Cloud Storage, Amazon S3, and Microsoft Azure. These can be run by providing “kinesis-index”, “gcs-deep-storage”, “s3-deep-storage”, or “azure-deep-storage” to -Dgroups for Amazon Kinesis, Google Cloud Storage, Amazon S3, and Microsoft Azure respectively. Note that only one group should be run per mvn command.
For all of the Cloud Integration tests, the following will also need to be provided:
For Amazon Kinesis, the following will also need to be provided:
For Google Cloud Storage, Amazon S3, and Microsoft Azure, the following will also need to be provided:
For Google Cloud Storage, in addition to the above, you will also have to:
For example, to run integration test for Google Cloud Storage:
mvn verify -P integration-tests -Dgroups=gcs-deep-storage -Doverride.config.path=<PATH_TO_FILE> -Dresource.file.dir.path=<PATH_TO_FOLDER> -Ddruid.test.config.cloudBucket=test-bucket -Ddruid.test.config.cloudPath=test-data-folder/
The integration test that indexes from hadoop is not run as part of the integration test run discussed above. This is because druid test clusters might not, in general, have access to hadoop. This also applies to integration test that uses Hadoop HDFS as an inputSource or as a deep storage. To run integration test that uses Hadoop, you will have to run a Hadoop cluster. This can be done in two ways:
Currently, hdfs-deep-storage and other -deep-storage integration test groups can only be run with Druid Docker test clusters by passing -Dstart.hadoop.docker=true to start Hadoop container. You will also have to provide -Doverride.config.path=<PATH_TO_FILE> with your Druid‘s Hadoop configs set. See integration-tests/docker/environment-configs/override-examples/hdfs directory for example. Note that if the integration test you are running also uses other cloud extension (S3, Azure, GCS), additional credentials/configs may need to be set in the same file as your Druid’s Hadoop configs set.
If you are running ITHadoopIndexTest with your own Druid + Hadoop cluster, please follow the below steps:
When running the Hadoop tests, you must set -Dextra.datasource.name.suffix='', due to https://github.com/apache/druid/issues/9788.
Run the test using mvn (using the bundled Docker-based Hadoop cluster):
mvn verify -P integration-tests -Dit.test=ITHadoopIndexTest -Dstart.hadoop.docker=true -Doverride.config.path=docker/environment-configs/override-examples/hdfs -Dextra.datasource.name.suffix=''
Run the test using mvn (using config file for existing Hadoop cluster):
mvn verify -P int-tests-config-file -Dit.test=ITHadoopIndexTest -Dextra.datasource.name.suffix=''
In some test environments, the machine where the tests need to be executed cannot access the outside internet, so mvn cannot be run. In that case, do the following instead of running the tests using mvn:
On a machine that can do mvn builds:
cd druid mvn clean package cd integration_tests mvn dependency:copy-dependencies package
Copy the integration-tests directory to the test cluster.
TDIR=<directory containing integration-tests>/target VER=<version of druid you built> export CLASSPATH=$TDIR/dependency/*:$TDIR/druid-integration-tests-$VER.jar:$TDIR/druid-integration-tests-$VER-tests.jar
java -Duser.timezone=UTC -Dfile.encoding=UTF-8 -Ddruid.test.config.type=configFile -Ddruid.test.config.configFile=<pathname of configuration file> org.testng.TestNG -testrunfactory org.testng.DruidTestRunnerFactory -testclass org.apache.druid.tests.hadoop.ITHadoopIndexTest
For every end-user functionality provided by druid we should have an integration-test verifying the correctness.
A test can access different helper and utility classes provided by test-framework in order to access Coordinator,Broker etc.. To mark a test be able to use Guice Dependency Injection - Annotate the test class with the below annotation
@Guice(moduleFactory = DruidTestModuleFactory.class)
This will tell the test framework that the test class needs to be constructed using guice.
Refer ITIndexerTest as an example on how to use dependency Injection
By default, test methods in a test class will be run in sequential order one at a time. Test methods for a given test class can be set to run in parallel (multiple test methods of each class running at the same time) by excluding the given class/package from the “AllSerializedTests” test tag section and including it in the “AllParallelizedTests” test tag section in integration-tests/src/test/resources/testng.xml. TestNG uses two parameters, i.e., thread-count and data-provider-thread-count, for parallel test execution, which are both set to 2 for Druid integration tests. For test using parallel execution with data provider, you will also need to set @DataProvider(parallel = true) on your data provider method in your test class. Note that for test using parallel execution with data provider, the test class does not need to be in the “AllParallelizedTests” test tag section and if it is in the “AllParallelizedTests” test tag section it will actually be run with thread-count times data-provider-thread-count threads. You may want to modify those values for faster execution. See https://testng.org/doc/documentation-main.html#parallel-running and https://testng.org/doc/documentation-main.html#parameters-dataproviders for details. Please be mindful when adding tests to the “AllParallelizedTests” test tag that the tests can run in parallel with other tests from the same class at the same time. i.e. test does not modify/restart/stop the druid cluster or other dependency containers, test does not use excessive memory starving other concurent task, test does not modify and/or use other task, supervisor, datasource it did not create.