docs/ingestion/compaction.md

id: compaction title: “Compaction” description: “Defines compaction and automatic compaction (auto-compaction or autocompaction) for segment optimization. Use cases and strategies for compaction. Describes compaction task configuration.”

Query performance in Apache Druid depends on optimally sized segments. Compaction is one strategy you can use to optimize segment size for your Druid database. Compaction tasks read an existing set of segments for a given time interval and combine the data into a new “compacted” set of segments. In some cases the compacted segments are larger, but there are fewer of them. In other cases the compacted segments may be smaller. Compaction tends to increase performance because optimized segments require less per-segment processing and less memory overhead for ingestion and for querying paths.

Compaction strategies

There are several cases to consider compaction for segment optimization:

With streaming ingestion, data can arrive out of chronological order creating lots of small segments.
If you append data using appendToExisting for native batch ingestion creating suboptimal segments.
When you use index_parallel for parallel batch indexing and the parallel ingestion tasks create many small segments.
When a misconfigured ingestion task creates oversized segments.

By default, compaction does not modify the underlying data of the segments. However, there are cases when you may want to modify data during compaction to improve query performance:

If, after ingestion, you realize that data for the time interval is sparse, you can use compaction to increase the segment granularity.
Over time you don't need fine-grained granularity for older data so you want use compaction to change older segments to a coarser query granularity. This reduces the storage space required for older data. For example from minute to hour, or hour to day. You cannot go from coarser granularity to finer granularity.
You can change the dimension order to improve sorting and reduce segment size.
You can remove unused columns in compaction or implement an aggregation metric for older data.
You can change segment rollup from dynamic partitioning with best-effort rollup to hash or range partitioning with perfect rollup. For more information on rollup, see perfect vs best-effort rollup.

Compaction does not improve performance in all situations. For example, if you rewrite your data with each ingestion task, you don't need to use compaction. See Segment optimization for additional guidance to determine if compaction will help in your environment.

Types of compaction

You can configure the Druid Coordinator to perform automatic compaction, also called auto-compaction, for a datasource. Using a segment search policy, the coordinator periodically identifies segments for compaction starting with the newest to oldest. When it discovers segments that have not been compacted or segments that were compacted with a different or changed spec, it submits compaction task for those segments and only those segments.

Automatic compaction works in most use cases and should be your first option. To learn more about automatic compaction, see Compacting Segments.

In cases where you require more control over compaction, you can manually submit compaction tasks. For example:

Automatic compaction is running into the limit of task slots available to it, so tasks are waiting for previous automatic compaction tasks to complete. Manual compaction can use all available task slots, therefore you can complete compaction more quickly by submitting more concurrent tasks for more intervals.
You want to force compaction for a specific time range or you want to compact data out of chronological order.

See Setting up a manual compaction task for more about manual compaction tasks.

Data handling with compaction

During compaction, Druid overwrites the original set of segments with the compacted set. Druid also locks the segments for the time interval being compacted to ensure data consistency. By default, compaction tasks do not modify the underlying data. You can configure the compaction task to change the query granularity or add or remove dimensions in the compaction task. This means that the only changes to query results should be the result of intentional, not automatic, changes.

You can set dropExisting in ioConfig to “true” in the compaction task to configure Druid to mark all existing segments fully contained by the interval of the compaction task as unused (drop the segments). See the suggestion for reindexing with finer granularity under Implementation considerations for an example.

WARNING: dropExisting in ioConfig is a beta feature. It may cause data within the compaction task interval to become temporarily unavailable.

If an ingestion task needs to write data to a segment for a time interval locked for compaction, by default the ingestion task supersedes the compaction task and the compaction task fails without finishing. For manual compaction tasks you can adjust the input spec interval to avoid conflicts between ingestion and compaction. For automatic compaction, you can set the skipOffsetFromLatest key to adjustment the auto compaction starting point from the current time to reduce the chance of conflicts between ingestion and compaction. See Compaction dynamic configuration for more information. Another option is to set the compaction task to higher priority than the ingestion task.

Segment granularity handling

Unless you modify the segment granularity in the granularity spec, Druid attempts to retain the granularity for the compacted segments. When segments have different segment granularities with no overlap in interval Druid creates a separate compaction task for each to retain the segment granularity in the compacted segment.

If segments have different segment granularities before compaction but there is some overlap in interval, Druid attempts find start and end of the overlapping interval and uses the closest segment granularity level for the compacted segment. For example consider two overlapping segments: segment “A” for the interval 01/01/2021-01/02/2021 with day granularity and segment “B” for the interval 01/01/2021-02/01/2021. Druid attempts to combine and compacted the overlapped segments. In this example, the earliest start time for the two segments above is 01/01/2020 and the latest end time of the two segments above is 02/01/2020. Druid compacts the segments together even though they have different segment granularity. Druid uses month segment granularity for the newly compacted segment even though segment A's original segment granularity was DAY.

Query granularity handling

Unless you modify the query granularity in the granularity spec, Druid retains the query granularity for the compacted segments. If segments have different query granularities before compaction, Druid chooses the finest level of granularity for the resulting compacted segment. For example if a compaction task combines two segments, one with day query granularity and one with minute query granularity, the resulting segment uses minute query granularity.

In Apache Druid 0.21.0 and prior, Druid sets the granularity for compacted segments to the default granularity of NONE regardless of the query granularity of the original segments.

If you configure query granularity in compaction to go from a finer granularity like month to a coarser query granularity like year, then Druid overshadows the original segment with coarser granularity. Because the new segments have a coarser granularity, running a kill task to remove the overshadowed segments for those intervals will cause you to permanently lose the finer granularity data.

Dimension handling

Apache Druid supports schema changes. Therefore, dimensions can be different across segments even if they are a part of the same data source. See Different schemas among segments. If the input segments have different dimensions, the resulting compacted segment include all dimensions of the input segments.

Even when the input segments have the same set of dimensions, the dimension order or the data type of dimensions can be different. The dimensions of recent segments precede that of old segments in terms of data types and the ordering because more recent segments are more likely to have the preferred order and data types.

If you want to control dimension ordering or ensure specific values for dimension types, you can configure a custom dimensionsSpec in the compaction task spec.

Rollup

Druid only rolls up the output segment when rollup is set for all input segments. See Roll-up for more details. You can check that your segments are rolled up or not by using Segment Metadata Queries.

Setting up manual compaction

To perform a manual compaction, you submit a compaction task. Compaction tasks merge all segments for the defined interval according to the following syntax:

{
    "type": "compact",
    "id": <task_id>,
    "dataSource": <task_datasource>,
    "ioConfig": <IO config>,
    "dimensionsSpec" <custom dimensionsSpec>,
    "metricsSpec" <custom metricsSpec>,
    "tuningConfig" <parallel indexing task tuningConfig>,
    "granularitySpec" <compaction task granularitySpec>,
    "context": <task context>
}

Field	Description	Required
`type`	Task type. Should be `compact`	Yes
`id`	Task id	No
`dataSource`	Data source name to compact	Yes
`ioConfig`	I/O configuration for compaction task. See Compaction I/O configuration for details.	Yes
`dimensionsSpec`	Custom dimensions spec. The compaction task uses the specified dimensions spec if it exists instead of generating one.	No
`metricsSpec`	Custom metrics spec. The compaction task uses the specified metrics spec rather than generating one.	No
`segmentGranularity`	When set, the compaction task changes the segment granularity for the given interval. Deprecated. Use `granularitySpec`.	No.
`tuningConfig`	Parallel indexing task tuningConfig. `awaitSegmentAvailabilityTimeoutMillis` in the tuning config is not currently supported for compaction tasks. Do not set it to a non-zero value.	No
`context`	Task context	No
`granularitySpec`	Custom `granularitySpec` to describe the `segmentGranularity` and `queryGranularity` for the compacted segments. See Compaction granularitySpec.	No

Note: Use granularitySpec over segmentGranularity and only set one of these values. If you specify different values for these in the same compaction spec, the task fails.

To control the number of result segments per time chunk, you can set maxRowsPerSegment or numShards.

You can run multiple compaction tasks in parallel. For example, if you want to compact the data for a year, you are not limited to running a single task for the entire year. You can run 12 compaction tasks with month-long intervals.

A compaction task internally generates an index task spec for performing compaction work with some fixed parameters. For example, its inputSource is always the DruidInputSource, and dimensionsSpec and metricsSpec include all dimensions and metrics of the input segments by default.

Compaction tasks exit without doing anything and issue a failure status code in either of the following cases:

If the interval you specify has no data segments loaded
If the interval you specify is empty.

Note that the metadata between input segments and the resulting compacted segments may differ if the metadata among the input segments differs as well. If all input segments have the same metadata, however, the resulting output segment will have the same metadata as all input segments.

Example compaction task

The following JSON illustrates a compaction task to compact all segments within the interval 2017-01-01/2018-01-01 and create new segments:

{
  "type" : "compact",
  "dataSource" : "wikipedia",
  "ioConfig" : {
    "type": "compact",
    "inputSpec": {
      "type": "interval",
      "interval": "2020-01-01/2021-01-01",
    }
  },
  "granularitySpec": {
      "segmentGranularity":"day",
      "queryGranularity":"hour"
    }
}

This task doesn't specify a granularitySpec so Druid retains the original segment granularity unchanged when compaction is complete.

Compaction I/O configuration

The compaction ioConfig requires specifying inputSpec as follows:

Field	Description	Default	Required?
`type`	Task type: `compact`	none	Yes
`inputSpec`	Input specification	none	Yes
`dropExisting`	If `true`, when the task publishes newly compacted segments the compaction, it marks all existing segments fully contained by either of the following as unused (drops the segments): - the `interval` in the `interval` type `inputSpec`. - the umbrella interval of the `segments` in the `segment` type `inputSpec`. If compaction fails, Druid does not drop or mark unused any segments. WARNING: `dropExisting` in `ioConfig` is a beta feature. It may cause data within the compaction task interval to become temporarily unavailable.	false	no

Druid supports two supported inputSpec formats:

Interval `inputSpec`:

 |Field|Description|Required|
 |-----|-----------|--------|
 |`type`|Task type. Should be `interval`|Yes|
 |`interval`|Interval to compact|Yes|

Segments `inputSpec`:

 |Field|Description|Required|
 |-----|-----------|--------|
 |`type`|Task type. Should be `segments`|Yes|
 |`segments`|A list of segment IDs|Yes|

Compaction granularity spec

You can optionally use the granularitySpec object to configure the segment granularity and the query granularity of the compacted segments. Their syntax is as follows:

    "type": "compact",
    "id": <task_id>,
    "dataSource": <task_datasource>,
    ...
    ,
    "granularitySpec": {
      "segmentGranularity": <time_period>,
      "queryGranularity": <time_period>
    }
    ...

granularitySpec takes the following keys:

Field	Description	Required
`segmentGranularity`	Time chunking period for the segment granularity. Defaults to ‘null’, which preserves the original segment granularity. Accepts all Query granularity values.	No
`queryGranularity`	Time chunking period for the query granularity. Defaults to ‘null’, which preserves the original query granularity. Accepts all Query granularity values. Not supported for automatic compaction.	No

For example, to set the segment granularity to “day” and the query granularity to “hour”:

{
  "type" : "compact",
  "dataSource" : "wikipedia",
  "ioConfig" : {
    "type": "compact",
    "inputSpec": {
      "type": "interval",
      "interval": "2017-01-01/2018-01-01",
    },
    "granularitySpec": {
      "segmentGranularity":"day",
      "queryGranularity":"hour"
    }
  }
}

Learn more

See the following topics for more information:

Segment optimization for guidance to determine if compaction will help in your case.
Compacting Segments for more on automatic compaction.
Compaction Configuration API and Compaction Configuration for automatic compaction configuration information.