3.1.0-ubi-clouseau/resources/docker-entrypoint.sh

#!/bin/bash
# Licensed under the Apache License, Version 2.0 (the "License"); you may not
# use this file except in compliance with the License. You may obtain a copy of
# the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations under
# the License.
set -e

# first arg is `-something` or `+something`
if [ "${1#-}" != "$1" ] || [ "${1#+}" != "$1" ]; then
	set -- /opt/couchdb/bin/couchdb "$@"
fi

# first arg is the bare word `couchdb`
if [ "$1" = 'couchdb' ]; then
	shift
	set -- /opt/couchdb/bin/couchdb "$@"
fi

if [ "$1" = '/opt/couchdb/bin/couchdb' ]; then
	# this is where runtime configuration changes will be written.
	# we need to explicitly touch it here in case /opt/couchdb/etc has
	# been mounted as an external volume, in which case it won't exist.
	# If running as the couchdb user (i.e. container starts as root),
	# write permissions will be granted below.
	touch /opt/couchdb/etc/local.d/docker.ini

	# if user is root, assume running under the couchdb user (default)
	# and ensure it is able to access files and directories that may be mounted externally
	if [ "$(id -u)" = '0' ]; then
		# Check that we own everything in /opt/couchdb and fix if necessary. We also
		# add the `-f` flag in all the following invocations because there may be
		# cases where some of these ownership and permissions issues are non-fatal
		# (e.g. a config file owned by root with o+r is actually fine), and we don't
		# to be too aggressive about crashing here ...
		find /opt/couchdb \! \( -user couchdb -group 0 \) -exec chown -f couchdb:0 '{}' +

		# Ensure that data files have the correct permissions. We were previously
		# preventing any access to these files outside of couchdb:couchdb, but it
		# turns out that CouchDB itself does not set such restrictive permissions
		# when it creates the files. The approach taken here ensures that the
		# contents of the datadir have the same permissions as they had when they
		# were initially created. This should minimize any startup delay.
		find /opt/couchdb/data -type d ! -perm 0755 -exec chmod -f 0755 '{}' +
		find /opt/couchdb/data -type f ! -perm 0644 -exec chmod -f 0644 '{}' +

		# Do the same thing for configuration files and directories. Technically
		# CouchDB only needs read access to the configuration files as all online
		# changes will be applied to the "docker.ini" file below, but we set 644
		# for the sake of consistency.
		find /opt/couchdb/etc -type d ! -perm 0755 -exec chmod -f 0755 '{}' +
		find /opt/couchdb/etc -type f ! -perm 0644 -exec chmod -f 0644 '{}' +

		# also for clouseau
		find -L /opt/couchdb-search \! \( -user couchdb -group 0 \) -exec chown -f couchdb:0 '{}' +
		find -L /opt/couchdb-search -type d ! -perm 0755 -exec chmod -f 0755 '{}' +
    	find -L /opt/couchdb-search -type f ! -perm 0644 -exec chmod -f 0644 '{}' +
	fi

	# if erlang cookie passed in, set in clouseau.ini
	kCOOKIE_REGEX='setcookie ([^ ]+)'
	cookie='monster'
	if [[ $ERL_FLAGS =~ $kCOOKIE_REGEX ]]; then
		cookie="${BASH_REMATCH[1]}"
	else
		ERL_FLAGS="$ERL_FLAGS -setcookie $cookie"
	fi

	if ! grep "cookie" /opt/couchdb-search/etc/clouseau.ini; then
		echo "cookie=$cookie" >> /opt/couchdb-search/etc/clouseau.ini
	fi

	if [ ! -z "$NODENAME" ] && ! grep "couchdb@" /opt/couchdb/etc/vm.args; then
		echo "-name couchdb@$NODENAME" >> /opt/couchdb/etc/vm.args
	fi

	# a node name is required for clouseau/distributed erlang.
	# set if not specified via ERL_FLAGS or vm.args
	kNAME_REGEX='\-name ([^ ]+)'
	if ! [[ $ERL_FLAGS =~ $kNAME_REGEX ]]; then
		echo "No name found in ERL_FLAGS $ERL_FLAGS"
		nodename=${NODENAME:=127.0.0.1}
		if ! grep -e '-name' /opt/couchdb/etc/vm.args; then
			echo "No -name found in vm.args. Using couchdb@$nodename"
			echo "-name couchdb@$nodename" >> /opt/couchdb/etc/vm.args
		fi
	fi

	if [ "$COUCHDB_USER" ] && [ "$COUCHDB_PASSWORD" ]; then
		# Create admin only if not already present
		if ! grep -Pzoqr "\[admins\]\n$COUCHDB_USER =" /opt/couchdb/etc/local.d/*.ini; then
			printf "\n[admins]\n%s = %s\n" "$COUCHDB_USER" "$COUCHDB_PASSWORD" >> /opt/couchdb/etc/local.d/docker.ini
		fi
	fi

	if [ "$COUCHDB_SECRET" ]; then
		# Set secret only if not already present
		if ! grep -Pzoqr "\[couch_httpd_auth\]\nsecret =" /opt/couchdb/etc/local.d/*.ini; then
			printf "\n[couch_httpd_auth]\nsecret = %s\n" "$COUCHDB_SECRET" >> /opt/couchdb/etc/local.d/docker.ini
		fi
	fi

	if [ "$(id -u)" = '0' ]; then
		chown -f couchdb:0 /opt/couchdb/etc/local.d/docker.ini || true
	fi

	# if we don't find an [admins] section followed by a non-comment, display a warning
    if ! grep -Pzoqr '\[admins\]\n[^;]\w+' /opt/couchdb/etc/default.d/*.ini /opt/couchdb/etc/local.d/*.ini; then
		# The - option suppresses leading tabs but *not* spaces. :)
		cat >&2 <<-'EOWARN'
*************************************************************
ERROR: CouchDB 3.0+ will no longer run in "Admin Party"
       mode. You *MUST* specify an admin user and
       password, either via your own .ini file mapped
       into the container at /opt/couchdb/etc/local.ini
       or inside /opt/couchdb/etc/local.d, or with
       "-e COUCHDB_USER=admin -e COUCHDB_PASSWORD=password"
       to set it via "docker run".
*************************************************************
EOWARN
		exit 1
	fi

	if [ "$(id -u)" = '0' ]; then
		# Run as CouchDB user
		cat > /etc/service/couchdb/run <<-EOF
			#!/bin/sh
			export HOME=/opt/couchdb
			exec 2>&1
			exec chpst -u couchdb env ERL_FLAGS="$ERL_FLAGS" $@
		EOF

		cat > /etc/service/couchdb-search/run <<-EOF
			#!/bin/sh
			export HOME=/opt/couchdb-search
			exec 2>&1
			exec chpst -u couchdb java -server \
				-Xmx2G \
				-Dsun.net.inetaddr.ttl=30 \
				-Dsun.net.inetaddr.negative.ttl=30 \
				-Dlog4j.configuration=file:/opt/couchdb-search/etc/log4j.properties \
				-XX:OnOutOfMemoryError="kill -9 %p" \
				-XX:+UseConcMarkSweepGC \
				-XX:+CMSParallelRemarkEnabled \
				-classpath '/opt/couchdb-search/lib/*' \
				com.cloudant.clouseau.Main \
				/opt/couchdb-search/etc/clouseau.ini
		EOF
	else
		# Write out runit scripts to start as the ambient uid
		cat > /etc/service/couchdb/run <<-EOF
			#!/bin/sh
			export HOME=/opt/couchdb
			exec 2>&1
			exec chpst env ERL_FLAGS="$ERL_FLAGS" $@
		EOF

		cat > /etc/service/couchdb-search/run <<-EOF
			#!/bin/sh
			export HOME=/opt/couchdb-search
			exec 2>&1
			exec chpst java -server \
				-Xmx2G \
				-Dsun.net.inetaddr.ttl=30 \
				-Dsun.net.inetaddr.negative.ttl=30 \
				-Dlog4j.configuration=file:/opt/couchdb-search/etc/log4j.properties \
				-XX:OnOutOfMemoryError="kill -9 %p" \
				-XX:+UseConcMarkSweepGC \
				-XX:+CMSParallelRemarkEnabled \
				-classpath '/opt/couchdb-search/lib/*' \
				com.cloudant.clouseau.Main \
				/opt/couchdb-search/etc/clouseau.ini
		EOF
	fi

	exec /sbin/runsvdir-start
fi

exec "$@"