%%%
%%% Copyright 2011, Boundary
%%%
%%% Licensed under the Apache License, Version 2.0 (the "License");
%%% you may not use this file except in compliance with the License.
%%% You may obtain a copy of the License at
%%%
%%%     http://www.apache.org/licenses/LICENSE-2.0
%%%
%%% Unless required by applicable law or agreed to in writing, software
%%% distributed under the License is distributed on an "AS IS" BASIS,
%%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
%%% See the License for the specific language governing permissions and
%%% limitations under the License.
%%%


%%%-------------------------------------------------------------------
%%% File:      bear.erl
%%% @author    joe williams <j@boundary.com>
%%% @doc
%%% statistics functions for calucating based on id and a list of values
%%% @end
%%%------------------------------------------------------------------

-module(bear).

-compile([export_all]).

-export([
         get_statistics/1,
         get_statistics/2
        ]).

-define(HIST_BINS, 10).

-define(STATS_MIN, 5).

-record(scan_result, {n=0, sumX=0, sumXX=0, sumInv=0, sumLog, max, min}).
-record(scan_result2, {x2=0, x3=0, x4=0}).


get_statistics([_,_,_,_,_|_] = Values) ->
    Scan_res = scan_values(Values),
    Scan_res2 = scan_values2(Values, Scan_res),
    Variance = variance(Scan_res, Scan_res2),
    SortedValues = lists:sort(Values),
    [
     {min, Scan_res#scan_result.min},
     {max, Scan_res#scan_result.max},
     {arithmetic_mean, arithmetic_mean(Scan_res)},
     {geometric_mean, geometric_mean(Scan_res)},
     {harmonic_mean, harmonic_mean(Scan_res)},
     {median, percentile(SortedValues, Scan_res, 0.5)},
     {variance, Variance},
     {standard_deviation, std_deviation(Scan_res, Scan_res2)},
     {skewness, skewness(Scan_res, Scan_res2)},
     {kurtosis, kurtosis(Scan_res, Scan_res2)},
     {percentile,
      [
       {50, percentile(SortedValues, Scan_res, 0.50)},
       {75, percentile(SortedValues, Scan_res, 0.75)},
       {90, percentile(SortedValues, Scan_res, 0.90)},
       {95, percentile(SortedValues, Scan_res, 0.95)},
       {99, percentile(SortedValues, Scan_res, 0.99)},
       {999, percentile(SortedValues, Scan_res, 0.999)}
      ]
     },
     {histogram, get_histogram(Values, Scan_res, Scan_res2)},
     {n, Scan_res#scan_result.n}
    ];
get_statistics(Values) when is_list(Values) ->
    [
     {min, 0.0},
     {max, 0.0},
     {arithmetic_mean, 0.0},
     {geometric_mean, 0.0},
     {harmonic_mean, 0.0},
     {median, 0.0},
     {variance, 0.0},
     {standard_deviation, 0.0},
     {skewness, 0.0},
     {kurtosis, 0.0},
     {percentile,
      [
       {50, 0.0},
       {75, 0.0},
       {90, 0.0},
       {95, 0.0},
       {99, 0.0},
       {999, 0.0}
      ]
     },
     {histogram, [{0, 0}]},
     {n, 0}
    ].

get_statistics_subset([_,_,_,_,_|_] = Values, Items) ->
    Length = length(Values),
    SortedValues = lists:sort(Values),
    Steps = calc_steps(Items),
    Scan_res = if Steps > 1 -> scan_values(Values);
        true -> []
    end,
    Scan_res2 = if Steps > 2 -> scan_values2(Values, Scan_res);
        true -> []
    end,
    report_subset(Items, Length, SortedValues, Scan_res, Scan_res2);
get_statistics_subset(Values, Items) when is_list(Values) ->
    get_null_statistics_subset(Items, []).

get_null_statistics_subset([{percentile, Ps}|Items], Acc) ->
    get_null_statistics_subset(Items, [{percentile, [{P, 0.0} || P <- Ps]}|Acc]);
get_null_statistics_subset([I|Items], Acc) ->
    get_null_statistics_subset(Items, [{I, 0.0}|Acc]);
get_null_statistics_subset([], Acc) ->
    lists:reverse(Acc).

calc_steps(Items) ->
    lists:foldl(
        fun({I,_},Acc) ->
            erlang:max(level(I), Acc);
           (I,Acc) ->
            erlang:max(level(I), Acc)
    end, 1, Items).

level(standard_deviation) -> 3;
level(variance          ) -> 3;
level(skewness          ) -> 3;
level(kurtosis          ) -> 3;
level(histogram         ) -> 3;
level(arithmetic_mean   ) -> 2;
level(geometric_mean    ) -> 2;
level(harmonic_mean     ) -> 2;
level(_) -> 1.

report_subset(Items, N, SortedValues, Scan_res, Scan_res2) ->
    lists:map(
      fun(min) -> {min, hd(SortedValues)};
         (max) -> {max, lists:last(SortedValues)};
         (arithmetic_mean) -> {arithmetic_mean, arithmetic_mean(Scan_res)};
         (harmonic_mean) -> {harmonic_mean, harmonic_mean(Scan_res)};
         (geometric_mean) -> {geometric_mean, geometric_mean(Scan_res)};
         (median) -> {median, percentile(SortedValues,
                                         #scan_result{n = N}, 0.5)};
         (variance) -> {variance, variance(Scan_res, Scan_res2)};
         (standard_deviation=I) -> {I, std_deviation(Scan_res, Scan_res2)};
         (skewness) -> {skewness, skewness(Scan_res, Scan_res2)};
         (kurtosis) -> {kurtosis, kurtosis(Scan_res, Scan_res2)};
         ({percentile,Ps}) -> {percentile, percentiles(Ps, N, SortedValues)};
         (histogram) ->
              {histogram, get_histogram(SortedValues, Scan_res, Scan_res2)};
         (n) -> {n, N}
      end, Items).

get_statistics(Values, _) when length(Values) < ?STATS_MIN ->
    0.0;
get_statistics(_, Values) when length(Values) < ?STATS_MIN ->
    0.0;
get_statistics(Values1, Values2) when length(Values1) /= length(Values2) ->
    0.0;
get_statistics(Values1, Values2) ->
    [
     {covariance, get_covariance(Values1, Values2)},
     {tau, get_kendall_correlation(Values1, Values2)},
     {rho, get_pearson_correlation(Values1, Values2)},
     {r, get_spearman_correlation(Values1, Values2)}
    ].

%%%===================================================================
%%% Internal functions
%%%===================================================================

scan_values([X|Values]) ->
    scan_values(Values, #scan_result{n=1, sumX=X, sumXX=X*X,
             sumLog=math_log(X),
             max=X, min=X, sumInv=inverse(X)}).

scan_values([X|Values],
      #scan_result{n=N, sumX=SumX, sumXX=SumXX, sumLog=SumLog,
                   max=Max, min=Min, sumInv=SumInv}=Acc) ->
    scan_values(Values,
                Acc#scan_result{n=N+1, sumX=SumX+X, sumXX=SumXX+X*X,
                                sumLog=SumLog+math_log(X),
                                max=max(X,Max), min=min(X,Min),
                                sumInv=SumInv+inverse(X)});
scan_values([], Acc) ->
    Acc.

scan_values2(Values, #scan_result{n=N, sumX=SumX}) ->
    scan_values2(Values, SumX/N, #scan_result2{}).

scan_values2([X|Values], Mean, #scan_result2{x2=X2, x3=X3, x4=X4}=Acc) ->
    Diff = X-Mean,
    Diff2 = Diff*Diff,
    Diff3 = Diff2*Diff,
    Diff4 = Diff2*Diff2,
    scan_values2(Values, Mean, Acc#scan_result2{x2=X2+Diff2, x3=X3+Diff3,
            x4=X4+Diff4});
scan_values2([], _, Acc) ->
    Acc.


arithmetic_mean(#scan_result{n=N, sumX=Sum}) ->
    Sum/N.

geometric_mean(#scan_result{n=N, sumLog=SumLog}) ->
    math:exp(SumLog/N).

harmonic_mean(#scan_result{sumInv=Zero}) when Zero =:= 0 orelse
                                              Zero =:= 0.0 ->
    %% Protect against divide by 0 if we have all 0 values
    0;
harmonic_mean(#scan_result{n=N, sumInv=Sum}) ->
    N/Sum.

percentile(SortedValues, #scan_result{n=N}, Percentile)
  when is_list(SortedValues) ->
    Element = round(Percentile * N),
    lists:nth(Element, SortedValues).

%% Two pass variance
%% Results match those given by the 'var' function in R
variance(#scan_result{n=N}, #scan_result2{x2=X2}) ->
    X2/(N-1).

std_deviation(Scan_res, Scan_res2) ->
    math:sqrt(variance(Scan_res, Scan_res2)).

%% http://en.wikipedia.org/wiki/Skewness
%%
%% skewness results should match this R function:
%% skewness <- function(x) {
%%    m3 <- mean((x - mean(x))^3)
%%    skew <- m3 / (sd(x)^3)
%%    skew
%% }
skewness(#scan_result{n=N}=Scan_res, #scan_result2{x3=X3}=Scan_res2) ->
    case math:pow(std_deviation(Scan_res,Scan_res2), 3) of
        0.0 ->
            0.0;  %% Is this really the correct thing to do here?
        Else ->
            (X3/N)/Else
    end.

%% http://en.wikipedia.org/wiki/Kurtosis
%%
%% results should match this R function:
%% kurtosis <- function(x) {
%%     m4 <- mean((x - mean(x))^4)
%%     kurt <- m4 / (sd(x)^4) - 3
%%     kurt
%% }
kurtosis(#scan_result{n=N}=Scan_res, #scan_result2{x4=X4}=Scan_res2) ->
    case math:pow(std_deviation(Scan_res,Scan_res2), 4) of
        0.0 ->
            0.0;  %% Is this really the correct thing to do here?
        Else ->
            ((X4/N)/Else) - 3
    end.

get_histogram(Values, Scan_res, Scan_res2) ->
    Bins = get_hist_bins(Scan_res#scan_result.min,
                         Scan_res#scan_result.max,
                         std_deviation(Scan_res, Scan_res2),
                         length(Values)
                        ),

    Dict = lists:foldl(fun (Value, Dict) ->
             update_bin(Value, Bins, Dict)
           end,
           dict:from_list([{Bin, 0} || Bin <- Bins]),
           Values),

    lists:sort(dict:to_list(Dict)).

update_bin(Value, [Bin|_Bins], Dict) when Value =< Bin ->
    dict:update_counter(Bin, 1, Dict);
update_bin(Values, [_Bin|Bins], Dict) ->
    update_bin(Values, Bins, Dict).

%% two pass covariance
%% (http://en.wikipedia.org/wiki/Algorithms_for_calculating_variance#Covariance)
%% matches results given by excel's 'covar' function
get_covariance(Values, _) when length(Values) < ?STATS_MIN ->
    0.0;
get_covariance(_, Values) when length(Values) < ?STATS_MIN ->
    0.0;
get_covariance(Values1, Values2) when length(Values1) /= length(Values2) ->
    0.0;
get_covariance(Values1, Values2) ->
    {SumX, SumY, N} = foldl2(fun (X, Y, {SumX, SumY, N}) ->
             {SumX+X, SumY+Y, N+1}
           end, {0,0,0}, Values1, Values2),
    MeanX = SumX/N,
    MeanY = SumY/N,
    Sum = foldl2(fun (X, Y, Sum) ->
       Sum + ((X - MeanX) * (Y - MeanY))
     end,
     0, Values1, Values2),
    Sum/N.

get_kendall_correlation(Values, _) when length(Values) < ?STATS_MIN ->
    0.0;
get_kendall_correlation(_, Values) when length(Values) < ?STATS_MIN ->
    0.0;
get_kendall_correlation(Values1, Values2) when length(Values1) /= length(Values2) ->
    0.0;
get_kendall_correlation(Values1, Values2) ->
    bear:kendall_correlation(Values1, Values2).

get_spearman_correlation(Values, _) when length(Values) < ?STATS_MIN ->
    0.0;
get_spearman_correlation(_, Values) when length(Values) < ?STATS_MIN ->
    0.0;
get_spearman_correlation(Values1, Values2) when length(Values1) /= length(Values2) ->
    0.0;
get_spearman_correlation(Values1, Values2) ->
    TR1 = ranks_of(Values1),
    TR2 = ranks_of(Values2),
    Numerator   = 6 * foldl2(fun (X, Y, Acc) ->
             Diff = X-Y,
             Acc + Diff*Diff
           end, 0, TR1,TR2),
    N = length(Values1),
    Denominator = math:pow(N,3)-N,
    1-(Numerator/Denominator).

ranks_of(Values) when is_list(Values) ->
    [Fst|Rest] = revsort(Values),
    TRs = ranks_of(Rest, [], 2, Fst, 1),
    Dict = gb_trees:from_orddict(TRs),
    L = lists:foldl(fun (Val, Acc) ->
                            Rank = gb_trees:get(Val, Dict),
                            [Rank|Acc]
                    end, [], Values),
    lists:reverse(L).

ranks_of([E|Es], Acc, N, P, S) ->
    ranks_of(Es,[{P,(S+N-1)/2}|Acc], N+1, E, N);
ranks_of([],  Acc, N, P, S) ->
    [{P,(S+N-1)/2}|Acc].


get_pearson_correlation(Values, _) when length(Values) < ?STATS_MIN ->
    0.0;
get_pearson_correlation(_, Values) when length(Values) < ?STATS_MIN ->
    0.0;
get_pearson_correlation(Values1, Values2) when length(Values1) /= length(Values2) ->
    0.0;
get_pearson_correlation(Values1, Values2) ->
    {SumX, SumY, SumXX, SumYY, SumXY, N} =
  foldl2(fun (X,Y,{SX, SY, SXX, SYY, SXY, N}) ->
          {SX+X, SY+Y, SXX+X*X, SYY+Y*Y, SXY+X*Y, N+1}
        end, {0,0,0,0,0,0}, Values1, Values2),
    Numer = (N*SumXY) - (SumX * SumY),
    case math:sqrt(((N*SumXX)-(SumX*SumX)) * ((N*SumYY)-(SumY*SumY))) of
        0.0 ->
            0.0; %% Is this really the correct thing to do here?
        Denom ->
            Numer/Denom
    end.

revsort(L) ->
    lists:reverse(lists:sort(L)).

%% Foldl over two lists
foldl2(F, Acc, [I1|L1], [I2|L2]) when is_function(F,3) ->
    foldl2(F, F(I1, I2, Acc), L1, L2);
foldl2(_F, Acc, [], []) ->
    Acc.

%% wrapper for math:log/1 to avoid dividing by zero
math_log(0) ->
    1;
math_log(0.0) ->
    1.0;
math_log(X) when X < 0 ->
    0; % it's not possible to take a log of a negative number, return 0
math_log(X) ->
    math:log(X).

%% wrapper for calculating inverse to avoid dividing by zero
inverse(0) ->
    0;
inverse(0.0) ->
    0.0;
inverse(X) ->
    1/X.

get_hist_bins(Min, Max, StdDev, Count) ->
    BinWidth = get_bin_width(StdDev, Count),
    BinCount = get_bin_count(Min, Max, BinWidth),
    case get_bin_list(BinWidth, BinCount, []) of
        List when length(List) =< 1 ->
            [Max];
        Bins ->
            %% add Min to Bins
            [Bin + Min || Bin <- Bins]
    end.

get_bin_list(Width, Bins, Acc) when Bins > length(Acc) ->
    Bin = ((length(Acc) + 1) * Width ),
    get_bin_list(Width, Bins, [round_bin(Bin)| Acc]);
get_bin_list(_, _, Acc) ->
    lists:usort(Acc).

round_bin(Bin) ->
    Base = case erlang:trunc(math:pow(10, round(math:log10(Bin) - 1))) of
        0 ->
            1;
        Else ->
            Else
    end,
    %io:format("bin ~p, base ~p~n", [Bin, Base]),
    round_bin(Bin, Base).

round_bin(Bin, Base) when Bin rem Base == 0 ->
    Bin;
round_bin(Bin, Base) ->
    Bin + Base - (Bin rem Base).

% the following is up for debate as far as what the best method
% of choosing bin counts and widths. these seem to work *good enough*
% in my testing

% bin width based on Sturges
% http://www.jstor.org/pss/2965501
get_bin_width(StdDev, Count) ->
    %io:format("stddev: ~p, count: ~p~n", [StdDev, Count]),
    case round((3.5 * StdDev) / math:pow(Count, 0.3333333)) of
        0 ->
            1;
        Else ->
            Else
    end.

% based on the simple ceilng function at
% http://en.wikipedia.org/wiki/Histograms#Number_of_bins_and_width
% with a modification to attempt to get on bin beyond the max value
get_bin_count(Min, Max, Width) ->
    %io:format("min: ~p, max: ~p, width ~p~n", [Min, Max, Width]),
    round((Max - Min) / Width) + 1.

%% taken from http://crunchyd.com/scutil/
%% All code here is MIT Licensed
%%  http://scutil.com/license.html

% seems to match the value returned by the 'cor' (method="kendal") R function
% http://en.wikipedia.org/wiki/Kendall_tau_rank_correlation_coefficient
kendall_correlation(List1, List2) when is_list(List1), is_list(List2) ->
    {RA,_} = lists:unzip(tied_ordered_ranking(List1)),
    {RB,_} = lists:unzip(tied_ordered_ranking(List2)),

    Ordering = lists:keysort(1, lists:zip(RA,RB)),
    {_,OrdB} = lists:unzip(Ordering),

    N = length(List1),
    P = lists:sum(kendall_right_of(OrdB, [])),

    -(( (4*P) / (N * (N - 1))) - 1).

simple_ranking(List) when is_list(List) ->
    lists:zip(lists:seq(1,length(List)),lists:reverse(lists:sort(List))).

tied_ranking(List) ->
    tied_rank_worker(simple_ranking(List), [], no_prev_value).

tied_ordered_ranking(List) when is_list(List) ->
    tied_ordered_ranking(List, tied_ranking(List), []).

tied_ordered_ranking([], [], Work) ->
    lists:reverse(Work);

tied_ordered_ranking([Front|Rem], Ranks, Work) ->
    {value,Item}  = lists:keysearch(Front,2,Ranks),
    {IRank,Front} = Item,
    tied_ordered_ranking(Rem, Ranks--[Item], [{IRank,Front}]++Work).

kendall_right_of([], Work) ->
    lists:reverse(Work);
kendall_right_of([F|R], Work) ->
    kendall_right_of(R, [kendall_right_of_item(F,R)]++Work).

kendall_right_of_item(B, Rem) ->
    length([R || R <- Rem, R < B]).

tied_add_prev(Work, {FoundAt, NewValue}) ->
    lists:duplicate( length(FoundAt), {lists:sum(FoundAt)/length(FoundAt), NewValue} ) ++ Work.

tied_rank_worker([], Work, PrevValue) ->
    lists:reverse(tied_add_prev(Work, PrevValue));

tied_rank_worker([Item|Remainder], Work, PrevValue) ->
    case PrevValue of
        no_prev_value ->
            {BaseRank,BaseVal} = Item,
            tied_rank_worker(Remainder, Work, {[BaseRank],BaseVal});
        {FoundAt,OldVal} ->
            case Item of
                {Id,OldVal} ->
                    tied_rank_worker(Remainder, Work, {[Id]++FoundAt,OldVal});
                {Id,NewVal} ->
                    tied_rank_worker(Remainder, tied_add_prev(Work, PrevValue), {[Id],NewVal})

            end
    end.


percentiles(Ps, N, Values) ->
    Items = [{P, perc(P, N)} || P <- Ps],
    pick_items(Values, 1, Items).

pick_items([H|_] = L, P, [{Tag,P}|Ps]) ->
    [{Tag,H} | pick_items(L, P, Ps)];
pick_items([_|T], P, Ps) ->
    pick_items(T, P+1, Ps);
pick_items([], _, Ps) ->
    [{Tag,undefined} || {Tag,_} <- Ps].

perc(P, Len) when is_integer(P), 0 =< P, P =< 100 ->
    V = round(P * Len / 100),
    erlang:max(1, V);
perc(P, Len) when is_integer(P), 100 =< P, P =< 1000 ->
    V = round(P * Len / 1000),
    erlang:max(1, V);
perc(P, Len) when is_float(P), 0 =< P, P =< 1 ->
    erlang:max(1, round(P * Len)).