'use strict';


var utils         = require('../utils/common');
var adler32       = require('./adler32');
var crc32         = require('./crc32');
var inflate_fast  = require('./inffast');
var inflate_table = require('./inftrees');

var CODES = 0;
var LENS = 1;
var DISTS = 2;

/* Public constants ==========================================================*/
/* ===========================================================================*/


/* Allowed flush values; see deflate() and inflate() below for details */
//var Z_NO_FLUSH      = 0;
//var Z_PARTIAL_FLUSH = 1;
//var Z_SYNC_FLUSH    = 2;
//var Z_FULL_FLUSH    = 3;
var Z_FINISH        = 4;
var Z_BLOCK         = 5;
var Z_TREES         = 6;


/* Return codes for the compression/decompression functions. Negative values
 * are errors, positive values are used for special but normal events.
 */
var Z_OK            = 0;
var Z_STREAM_END    = 1;
var Z_NEED_DICT     = 2;
//var Z_ERRNO         = -1;
var Z_STREAM_ERROR  = -2;
var Z_DATA_ERROR    = -3;
var Z_MEM_ERROR     = -4;
var Z_BUF_ERROR     = -5;
//var Z_VERSION_ERROR = -6;

/* The deflate compression method */
var Z_DEFLATED  = 8;


/* STATES ====================================================================*/
/* ===========================================================================*/


var    HEAD = 1;       /* i: waiting for magic header */
var    FLAGS = 2;      /* i: waiting for method and flags (gzip) */
var    TIME = 3;       /* i: waiting for modification time (gzip) */
var    OS = 4;         /* i: waiting for extra flags and operating system (gzip) */
var    EXLEN = 5;      /* i: waiting for extra length (gzip) */
var    EXTRA = 6;      /* i: waiting for extra bytes (gzip) */
var    NAME = 7;       /* i: waiting for end of file name (gzip) */
var    COMMENT = 8;    /* i: waiting for end of comment (gzip) */
var    HCRC = 9;       /* i: waiting for header crc (gzip) */
var    DICTID = 10;    /* i: waiting for dictionary check value */
var    DICT = 11;      /* waiting for inflateSetDictionary() call */
var        TYPE = 12;      /* i: waiting for type bits, including last-flag bit */
var        TYPEDO = 13;    /* i: same, but skip check to exit inflate on new block */
var        STORED = 14;    /* i: waiting for stored size (length and complement) */
var        COPY_ = 15;     /* i/o: same as COPY below, but only first time in */
var        COPY = 16;      /* i/o: waiting for input or output to copy stored block */
var        TABLE = 17;     /* i: waiting for dynamic block table lengths */
var        LENLENS = 18;   /* i: waiting for code length code lengths */
var        CODELENS = 19;  /* i: waiting for length/lit and distance code lengths */
var            LEN_ = 20;      /* i: same as LEN below, but only first time in */
var            LEN = 21;       /* i: waiting for length/lit/eob code */
var            LENEXT = 22;    /* i: waiting for length extra bits */
var            DIST = 23;      /* i: waiting for distance code */
var            DISTEXT = 24;   /* i: waiting for distance extra bits */
var            MATCH = 25;     /* o: waiting for output space to copy string */
var            LIT = 26;       /* o: waiting for output space to write literal */
var    CHECK = 27;     /* i: waiting for 32-bit check value */
var    LENGTH = 28;    /* i: waiting for 32-bit length (gzip) */
var    DONE = 29;      /* finished check, done -- remain here until reset */
var    BAD = 30;       /* got a data error -- remain here until reset */
var    MEM = 31;       /* got an inflate() memory error -- remain here until reset */
var    SYNC = 32;      /* looking for synchronization bytes to restart inflate() */

/* ===========================================================================*/


var ENOUGH_LENS = 852;
var ENOUGH_DISTS = 592;
//var ENOUGH =  (ENOUGH_LENS+ENOUGH_DISTS);

var MAX_WBITS = 15;
/* 32K LZ77 window */
var DEF_WBITS = MAX_WBITS;


function zswap32(q) {
  return  (((q >>> 24) & 0xff) +
          ((q >>> 8) & 0xff00) +
          ((q & 0xff00) << 8) +
          ((q & 0xff) << 24));
}


function InflateState() {
  this.mode = 0;             /* current inflate mode */
  this.last = false;          /* true if processing last block */
  this.wrap = 0;              /* bit 0 true for zlib, bit 1 true for gzip */
  this.havedict = false;      /* true if dictionary provided */
  this.flags = 0;             /* gzip header method and flags (0 if zlib) */
  this.dmax = 0;              /* zlib header max distance (INFLATE_STRICT) */
  this.check = 0;             /* protected copy of check value */
  this.total = 0;             /* protected copy of output count */
  // TODO: may be {}
  this.head = null;           /* where to save gzip header information */

  /* sliding window */
  this.wbits = 0;             /* log base 2 of requested window size */
  this.wsize = 0;             /* window size or zero if not using window */
  this.whave = 0;             /* valid bytes in the window */
  this.wnext = 0;             /* window write index */
  this.window = null;         /* allocated sliding window, if needed */

  /* bit accumulator */
  this.hold = 0;              /* input bit accumulator */
  this.bits = 0;              /* number of bits in "in" */

  /* for string and stored block copying */
  this.length = 0;            /* literal or length of data to copy */
  this.offset = 0;            /* distance back to copy string from */

  /* for table and code decoding */
  this.extra = 0;             /* extra bits needed */

  /* fixed and dynamic code tables */
  this.lencode = null;          /* starting table for length/literal codes */
  this.distcode = null;         /* starting table for distance codes */
  this.lenbits = 0;           /* index bits for lencode */
  this.distbits = 0;          /* index bits for distcode */

  /* dynamic table building */
  this.ncode = 0;             /* number of code length code lengths */
  this.nlen = 0;              /* number of length code lengths */
  this.ndist = 0;             /* number of distance code lengths */
  this.have = 0;              /* number of code lengths in lens[] */
  this.next = null;              /* next available space in codes[] */

  this.lens = new utils.Buf16(320); /* temporary storage for code lengths */
  this.work = new utils.Buf16(288); /* work area for code table building */

  /*
   because we don't have pointers in js, we use lencode and distcode directly
   as buffers so we don't need codes
  */
  //this.codes = new utils.Buf32(ENOUGH);       /* space for code tables */
  this.lendyn = null;              /* dynamic table for length/literal codes (JS specific) */
  this.distdyn = null;             /* dynamic table for distance codes (JS specific) */
  this.sane = 0;                   /* if false, allow invalid distance too far */
  this.back = 0;                   /* bits back of last unprocessed length/lit */
  this.was = 0;                    /* initial length of match */
}

function inflateResetKeep(strm) {
  var state;

  if (!strm || !strm.state) { return Z_STREAM_ERROR; }
  state = strm.state;
  strm.total_in = strm.total_out = state.total = 0;
  strm.msg = ''; /*Z_NULL*/
  if (state.wrap) {       /* to support ill-conceived Java test suite */
    strm.adler = state.wrap & 1;
  }
  state.mode = HEAD;
  state.last = 0;
  state.havedict = 0;
  state.dmax = 32768;
  state.head = null/*Z_NULL*/;
  state.hold = 0;
  state.bits = 0;
  //state.lencode = state.distcode = state.next = state.codes;
  state.lencode = state.lendyn = new utils.Buf32(ENOUGH_LENS);
  state.distcode = state.distdyn = new utils.Buf32(ENOUGH_DISTS);

  state.sane = 1;
  state.back = -1;
  //Tracev((stderr, "inflate: reset\n"));
  return Z_OK;
}

function inflateReset(strm) {
  var state;

  if (!strm || !strm.state) { return Z_STREAM_ERROR; }
  state = strm.state;
  state.wsize = 0;
  state.whave = 0;
  state.wnext = 0;
  return inflateResetKeep(strm);

}

function inflateReset2(strm, windowBits) {
  var wrap;
  var state;

  /* get the state */
  if (!strm || !strm.state) { return Z_STREAM_ERROR; }
  state = strm.state;

  /* extract wrap request from windowBits parameter */
  if (windowBits < 0) {
    wrap = 0;
    windowBits = -windowBits;
  }
  else {
    wrap = (windowBits >> 4) + 1;
    if (windowBits < 48) {
      windowBits &= 15;
    }
  }

  /* set number of window bits, free window if different */
  if (windowBits && (windowBits < 8 || windowBits > 15)) {
    return Z_STREAM_ERROR;
  }
  if (state.window !== null && state.wbits !== windowBits) {
    state.window = null;
  }

  /* update state and reset the rest of it */
  state.wrap = wrap;
  state.wbits = windowBits;
  return inflateReset(strm);
}

function inflateInit2(strm, windowBits) {
  var ret;
  var state;

  if (!strm) { return Z_STREAM_ERROR; }
  //strm.msg = Z_NULL;                 /* in case we return an error */

  state = new InflateState();

  //if (state === Z_NULL) return Z_MEM_ERROR;
  //Tracev((stderr, "inflate: allocated\n"));
  strm.state = state;
  state.window = null/*Z_NULL*/;
  ret = inflateReset2(strm, windowBits);
  if (ret !== Z_OK) {
    strm.state = null/*Z_NULL*/;
  }
  return ret;
}

function inflateInit(strm) {
  return inflateInit2(strm, DEF_WBITS);
}


/*
 Return state with length and distance decoding tables and index sizes set to
 fixed code decoding.  Normally this returns fixed tables from inffixed.h.
 If BUILDFIXED is defined, then instead this routine builds the tables the
 first time it's called, and returns those tables the first time and
 thereafter.  This reduces the size of the code by about 2K bytes, in
 exchange for a little execution time.  However, BUILDFIXED should not be
 used for threaded applications, since the rewriting of the tables and virgin
 may not be thread-safe.
 */
var virgin = true;

var lenfix, distfix; // We have no pointers in JS, so keep tables separate

function fixedtables(state) {
  /* build fixed huffman tables if first call (may not be thread safe) */
  if (virgin) {
    var sym;

    lenfix = new utils.Buf32(512);
    distfix = new utils.Buf32(32);

    /* literal/length table */
    sym = 0;
    while (sym < 144) { state.lens[sym++] = 8; }
    while (sym < 256) { state.lens[sym++] = 9; }
    while (sym < 280) { state.lens[sym++] = 7; }
    while (sym < 288) { state.lens[sym++] = 8; }

    inflate_table(LENS,  state.lens, 0, 288, lenfix,   0, state.work, { bits: 9 });

    /* distance table */
    sym = 0;
    while (sym < 32) { state.lens[sym++] = 5; }

    inflate_table(DISTS, state.lens, 0, 32,   distfix, 0, state.work, { bits: 5 });

    /* do this just once */
    virgin = false;
  }

  state.lencode = lenfix;
  state.lenbits = 9;
  state.distcode = distfix;
  state.distbits = 5;
}


/*
 Update the window with the last wsize (normally 32K) bytes written before
 returning.  If window does not exist yet, create it.  This is only called
 when a window is already in use, or when output has been written during this
 inflate call, but the end of the deflate stream has not been reached yet.
 It is also called to create a window for dictionary data when a dictionary
 is loaded.

 Providing output buffers larger than 32K to inflate() should provide a speed
 advantage, since only the last 32K of output is copied to the sliding window
 upon return from inflate(), and since all distances after the first 32K of
 output will fall in the output data, making match copies simpler and faster.
 The advantage may be dependent on the size of the processor's data caches.
 */
function updatewindow(strm, src, end, copy) {
  var dist;
  var state = strm.state;

  /* if it hasn't been done already, allocate space for the window */
  if (state.window === null) {
    state.wsize = 1 << state.wbits;
    state.wnext = 0;
    state.whave = 0;

    state.window = new utils.Buf8(state.wsize);
  }

  /* copy state->wsize or less output bytes into the circular window */
  if (copy >= state.wsize) {
    utils.arraySet(state.window, src, end - state.wsize, state.wsize, 0);
    state.wnext = 0;
    state.whave = state.wsize;
  }
  else {
    dist = state.wsize - state.wnext;
    if (dist > copy) {
      dist = copy;
    }
    //zmemcpy(state->window + state->wnext, end - copy, dist);
    utils.arraySet(state.window, src, end - copy, dist, state.wnext);
    copy -= dist;
    if (copy) {
      //zmemcpy(state->window, end - copy, copy);
      utils.arraySet(state.window, src, end - copy, copy, 0);
      state.wnext = copy;
      state.whave = state.wsize;
    }
    else {
      state.wnext += dist;
      if (state.wnext === state.wsize) { state.wnext = 0; }
      if (state.whave < state.wsize) { state.whave += dist; }
    }
  }
  return 0;
}

function inflate(strm, flush) {
  var state;
  var input, output;          // input/output buffers
  var next;                   /* next input INDEX */
  var put;                    /* next output INDEX */
  var have, left;             /* available input and output */
  var hold;                   /* bit buffer */
  var bits;                   /* bits in bit buffer */
  var _in, _out;              /* save starting available input and output */
  var copy;                   /* number of stored or match bytes to copy */
  var from;                   /* where to copy match bytes from */
  var from_source;
  var here = 0;               /* current decoding table entry */
  var here_bits, here_op, here_val; // paked "here" denormalized (JS specific)
  //var last;                   /* parent table entry */
  var last_bits, last_op, last_val; // paked "last" denormalized (JS specific)
  var len;                    /* length to copy for repeats, bits to drop */
  var ret;                    /* return code */
  var hbuf = new utils.Buf8(4);    /* buffer for gzip header crc calculation */
  var opts;

  var n; // temporary var for NEED_BITS

  var order = /* permutation of code lengths */
    [ 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 ];


  if (!strm || !strm.state || !strm.output ||
      (!strm.input && strm.avail_in !== 0)) {
    return Z_STREAM_ERROR;
  }

  state = strm.state;
  if (state.mode === TYPE) { state.mode = TYPEDO; }    /* skip check */


  //--- LOAD() ---
  put = strm.next_out;
  output = strm.output;
  left = strm.avail_out;
  next = strm.next_in;
  input = strm.input;
  have = strm.avail_in;
  hold = state.hold;
  bits = state.bits;
  //---

  _in = have;
  _out = left;
  ret = Z_OK;

  inf_leave: // goto emulation
  for (;;) {
    switch (state.mode) {
    case HEAD:
      if (state.wrap === 0) {
        state.mode = TYPEDO;
        break;
      }
      //=== NEEDBITS(16);
      while (bits < 16) {
        if (have === 0) { break inf_leave; }
        have--;
        hold += input[next++] << bits;
        bits += 8;
      }
      //===//
      if ((state.wrap & 2) && hold === 0x8b1f) {  /* gzip header */
        state.check = 0/*crc32(0L, Z_NULL, 0)*/;
        //=== CRC2(state.check, hold);
        hbuf[0] = hold & 0xff;
        hbuf[1] = (hold >>> 8) & 0xff;
        state.check = crc32(state.check, hbuf, 2, 0);
        //===//

        //=== INITBITS();
        hold = 0;
        bits = 0;
        //===//
        state.mode = FLAGS;
        break;
      }
      state.flags = 0;           /* expect zlib header */
      if (state.head) {
        state.head.done = false;
      }
      if (!(state.wrap & 1) ||   /* check if zlib header allowed */
        (((hold & 0xff)/*BITS(8)*/ << 8) + (hold >> 8)) % 31) {
        strm.msg = 'incorrect header check';
        state.mode = BAD;
        break;
      }
      if ((hold & 0x0f)/*BITS(4)*/ !== Z_DEFLATED) {
        strm.msg = 'unknown compression method';
        state.mode = BAD;
        break;
      }
      //--- DROPBITS(4) ---//
      hold >>>= 4;
      bits -= 4;
      //---//
      len = (hold & 0x0f)/*BITS(4)*/ + 8;
      if (state.wbits === 0) {
        state.wbits = len;
      }
      else if (len > state.wbits) {
        strm.msg = 'invalid window size';
        state.mode = BAD;
        break;
      }
      state.dmax = 1 << len;
      //Tracev((stderr, "inflate:   zlib header ok\n"));
      strm.adler = state.check = 1/*adler32(0L, Z_NULL, 0)*/;
      state.mode = hold & 0x200 ? DICTID : TYPE;
      //=== INITBITS();
      hold = 0;
      bits = 0;
      //===//
      break;
    case FLAGS:
      //=== NEEDBITS(16); */
      while (bits < 16) {
        if (have === 0) { break inf_leave; }
        have--;
        hold += input[next++] << bits;
        bits += 8;
      }
      //===//
      state.flags = hold;
      if ((state.flags & 0xff) !== Z_DEFLATED) {
        strm.msg = 'unknown compression method';
        state.mode = BAD;
        break;
      }
      if (state.flags & 0xe000) {
        strm.msg = 'unknown header flags set';
        state.mode = BAD;
        break;
      }
      if (state.head) {
        state.head.text = ((hold >> 8) & 1);
      }
      if (state.flags & 0x0200) {
        //=== CRC2(state.check, hold);
        hbuf[0] = hold & 0xff;
        hbuf[1] = (hold >>> 8) & 0xff;
        state.check = crc32(state.check, hbuf, 2, 0);
        //===//
      }
      //=== INITBITS();
      hold = 0;
      bits = 0;
      //===//
      state.mode = TIME;
      /* falls through */
    case TIME:
      //=== NEEDBITS(32); */
      while (bits < 32) {
        if (have === 0) { break inf_leave; }
        have--;
        hold += input[next++] << bits;
        bits += 8;
      }
      //===//
      if (state.head) {
        state.head.time = hold;
      }
      if (state.flags & 0x0200) {
        //=== CRC4(state.check, hold)
        hbuf[0] = hold & 0xff;
        hbuf[1] = (hold >>> 8) & 0xff;
        hbuf[2] = (hold >>> 16) & 0xff;
        hbuf[3] = (hold >>> 24) & 0xff;
        state.check = crc32(state.check, hbuf, 4, 0);
        //===
      }
      //=== INITBITS();
      hold = 0;
      bits = 0;
      //===//
      state.mode = OS;
      /* falls through */
    case OS:
      //=== NEEDBITS(16); */
      while (bits < 16) {
        if (have === 0) { break inf_leave; }
        have--;
        hold += input[next++] << bits;
        bits += 8;
      }
      //===//
      if (state.head) {
        state.head.xflags = (hold & 0xff);
        state.head.os = (hold >> 8);
      }
      if (state.flags & 0x0200) {
        //=== CRC2(state.check, hold);
        hbuf[0] = hold & 0xff;
        hbuf[1] = (hold >>> 8) & 0xff;
        state.check = crc32(state.check, hbuf, 2, 0);
        //===//
      }
      //=== INITBITS();
      hold = 0;
      bits = 0;
      //===//
      state.mode = EXLEN;
      /* falls through */
    case EXLEN:
      if (state.flags & 0x0400) {
        //=== NEEDBITS(16); */
        while (bits < 16) {
          if (have === 0) { break inf_leave; }
          have--;
          hold += input[next++] << bits;
          bits += 8;
        }
        //===//
        state.length = hold;
        if (state.head) {
          state.head.extra_len = hold;
        }
        if (state.flags & 0x0200) {
          //=== CRC2(state.check, hold);
          hbuf[0] = hold & 0xff;
          hbuf[1] = (hold >>> 8) & 0xff;
          state.check = crc32(state.check, hbuf, 2, 0);
          //===//
        }
        //=== INITBITS();
        hold = 0;
        bits = 0;
        //===//
      }
      else if (state.head) {
        state.head.extra = null/*Z_NULL*/;
      }
      state.mode = EXTRA;
      /* falls through */
    case EXTRA:
      if (state.flags & 0x0400) {
        copy = state.length;
        if (copy > have) { copy = have; }
        if (copy) {
          if (state.head) {
            len = state.head.extra_len - state.length;
            if (!state.head.extra) {
              // Use untyped array for more conveniend processing later
              state.head.extra = new Array(state.head.extra_len);
            }
            utils.arraySet(
              state.head.extra,
              input,
              next,
              // extra field is limited to 65536 bytes
              // - no need for additional size check
              copy,
              /*len + copy > state.head.extra_max - len ? state.head.extra_max : copy,*/
              len
            );
            //zmemcpy(state.head.extra + len, next,
            //        len + copy > state.head.extra_max ?
            //        state.head.extra_max - len : copy);
          }
          if (state.flags & 0x0200) {
            state.check = crc32(state.check, input, copy, next);
          }
          have -= copy;
          next += copy;
          state.length -= copy;
        }
        if (state.length) { break inf_leave; }
      }
      state.length = 0;
      state.mode = NAME;
      /* falls through */
    case NAME:
      if (state.flags & 0x0800) {
        if (have === 0) { break inf_leave; }
        copy = 0;
        do {
          // TODO: 2 or 1 bytes?
          len = input[next + copy++];
          /* use constant limit because in js we should not preallocate memory */
          if (state.head && len &&
              (state.length < 65536 /*state.head.name_max*/)) {
            state.head.name += String.fromCharCode(len);
          }
        } while (len && copy < have);

        if (state.flags & 0x0200) {
          state.check = crc32(state.check, input, copy, next);
        }
        have -= copy;
        next += copy;
        if (len) { break inf_leave; }
      }
      else if (state.head) {
        state.head.name = null;
      }
      state.length = 0;
      state.mode = COMMENT;
      /* falls through */
    case COMMENT:
      if (state.flags & 0x1000) {
        if (have === 0) { break inf_leave; }
        copy = 0;
        do {
          len = input[next + copy++];
          /* use constant limit because in js we should not preallocate memory */
          if (state.head && len &&
              (state.length < 65536 /*state.head.comm_max*/)) {
            state.head.comment += String.fromCharCode(len);
          }
        } while (len && copy < have);
        if (state.flags & 0x0200) {
          state.check = crc32(state.check, input, copy, next);
        }
        have -= copy;
        next += copy;
        if (len) { break inf_leave; }
      }
      else if (state.head) {
        state.head.comment = null;
      }
      state.mode = HCRC;
      /* falls through */
    case HCRC:
      if (state.flags & 0x0200) {
        //=== NEEDBITS(16); */
        while (bits < 16) {
          if (have === 0) { break inf_leave; }
          have--;
          hold += input[next++] << bits;
          bits += 8;
        }
        //===//
        if (hold !== (state.check & 0xffff)) {
          strm.msg = 'header crc mismatch';
          state.mode = BAD;
          break;
        }
        //=== INITBITS();
        hold = 0;
        bits = 0;
        //===//
      }
      if (state.head) {
        state.head.hcrc = ((state.flags >> 9) & 1);
        state.head.done = true;
      }
      strm.adler = state.check = 0;
      state.mode = TYPE;
      break;
    case DICTID:
      //=== NEEDBITS(32); */
      while (bits < 32) {
        if (have === 0) { break inf_leave; }
        have--;
        hold += input[next++] << bits;
        bits += 8;
      }
      //===//
      strm.adler = state.check = zswap32(hold);
      //=== INITBITS();
      hold = 0;
      bits = 0;
      //===//
      state.mode = DICT;
      /* falls through */
    case DICT:
      if (state.havedict === 0) {
        //--- RESTORE() ---
        strm.next_out = put;
        strm.avail_out = left;
        strm.next_in = next;
        strm.avail_in = have;
        state.hold = hold;
        state.bits = bits;
        //---
        return Z_NEED_DICT;
      }
      strm.adler = state.check = 1/*adler32(0L, Z_NULL, 0)*/;
      state.mode = TYPE;
      /* falls through */
    case TYPE:
      if (flush === Z_BLOCK || flush === Z_TREES) { break inf_leave; }
      /* falls through */
    case TYPEDO:
      if (state.last) {
        //--- BYTEBITS() ---//
        hold >>>= bits & 7;
        bits -= bits & 7;
        //---//
        state.mode = CHECK;
        break;
      }
      //=== NEEDBITS(3); */
      while (bits < 3) {
        if (have === 0) { break inf_leave; }
        have--;
        hold += input[next++] << bits;
        bits += 8;
      }
      //===//
      state.last = (hold & 0x01)/*BITS(1)*/;
      //--- DROPBITS(1) ---//
      hold >>>= 1;
      bits -= 1;
      //---//

      switch ((hold & 0x03)/*BITS(2)*/) {
      case 0:                             /* stored block */
        //Tracev((stderr, "inflate:     stored block%s\n",
        //        state.last ? " (last)" : ""));
        state.mode = STORED;
        break;
      case 1:                             /* fixed block */
        fixedtables(state);
        //Tracev((stderr, "inflate:     fixed codes block%s\n",
        //        state.last ? " (last)" : ""));
        state.mode = LEN_;             /* decode codes */
        if (flush === Z_TREES) {
          //--- DROPBITS(2) ---//
          hold >>>= 2;
          bits -= 2;
          //---//
          break inf_leave;
        }
        break;
      case 2:                             /* dynamic block */
        //Tracev((stderr, "inflate:     dynamic codes block%s\n",
        //        state.last ? " (last)" : ""));
        state.mode = TABLE;
        break;
      case 3:
        strm.msg = 'invalid block type';
        state.mode = BAD;
      }
      //--- DROPBITS(2) ---//
      hold >>>= 2;
      bits -= 2;
      //---//
      break;
    case STORED:
      //--- BYTEBITS() ---// /* go to byte boundary */
      hold >>>= bits & 7;
      bits -= bits & 7;
      //---//
      //=== NEEDBITS(32); */
      while (bits < 32) {
        if (have === 0) { break inf_leave; }
        have--;
        hold += input[next++] << bits;
        bits += 8;
      }
      //===//
      if ((hold & 0xffff) !== ((hold >>> 16) ^ 0xffff)) {
        strm.msg = 'invalid stored block lengths';
        state.mode = BAD;
        break;
      }
      state.length = hold & 0xffff;
      //Tracev((stderr, "inflate:       stored length %u\n",
      //        state.length));
      //=== INITBITS();
      hold = 0;
      bits = 0;
      //===//
      state.mode = COPY_;
      if (flush === Z_TREES) { break inf_leave; }
      /* falls through */
    case COPY_:
      state.mode = COPY;
      /* falls through */
    case COPY:
      copy = state.length;
      if (copy) {
        if (copy > have) { copy = have; }
        if (copy > left) { copy = left; }
        if (copy === 0) { break inf_leave; }
        //--- zmemcpy(put, next, copy); ---
        utils.arraySet(output, input, next, copy, put);
        //---//
        have -= copy;
        next += copy;
        left -= copy;
        put += copy;
        state.length -= copy;
        break;
      }
      //Tracev((stderr, "inflate:       stored end\n"));
      state.mode = TYPE;
      break;
    case TABLE:
      //=== NEEDBITS(14); */
      while (bits < 14) {
        if (have === 0) { break inf_leave; }
        have--;
        hold += input[next++] << bits;
        bits += 8;
      }
      //===//
      state.nlen = (hold & 0x1f)/*BITS(5)*/ + 257;
      //--- DROPBITS(5) ---//
      hold >>>= 5;
      bits -= 5;
      //---//
      state.ndist = (hold & 0x1f)/*BITS(5)*/ + 1;
      //--- DROPBITS(5) ---//
      hold >>>= 5;
      bits -= 5;
      //---//
      state.ncode = (hold & 0x0f)/*BITS(4)*/ + 4;
      //--- DROPBITS(4) ---//
      hold >>>= 4;
      bits -= 4;
      //---//
//#ifndef PKZIP_BUG_WORKAROUND
      if (state.nlen > 286 || state.ndist > 30) {
        strm.msg = 'too many length or distance symbols';
        state.mode = BAD;
        break;
      }
//#endif
      //Tracev((stderr, "inflate:       table sizes ok\n"));
      state.have = 0;
      state.mode = LENLENS;
      /* falls through */
    case LENLENS:
      while (state.have < state.ncode) {
        //=== NEEDBITS(3);
        while (bits < 3) {
          if (have === 0) { break inf_leave; }
          have--;
          hold += input[next++] << bits;
          bits += 8;
        }
        //===//
        state.lens[order[state.have++]] = (hold & 0x07);//BITS(3);
        //--- DROPBITS(3) ---//
        hold >>>= 3;
        bits -= 3;
        //---//
      }
      while (state.have < 19) {
        state.lens[order[state.have++]] = 0;
      }
      // We have separate tables & no pointers. 2 commented lines below not needed.
      //state.next = state.codes;
      //state.lencode = state.next;
      // Switch to use dynamic table
      state.lencode = state.lendyn;
      state.lenbits = 7;

      opts = { bits: state.lenbits };
      ret = inflate_table(CODES, state.lens, 0, 19, state.lencode, 0, state.work, opts);
      state.lenbits = opts.bits;

      if (ret) {
        strm.msg = 'invalid code lengths set';
        state.mode = BAD;
        break;
      }
      //Tracev((stderr, "inflate:       code lengths ok\n"));
      state.have = 0;
      state.mode = CODELENS;
      /* falls through */
    case CODELENS:
      while (state.have < state.nlen + state.ndist) {
        for (;;) {
          here = state.lencode[hold & ((1 << state.lenbits) - 1)];/*BITS(state.lenbits)*/
          here_bits = here >>> 24;
          here_op = (here >>> 16) & 0xff;
          here_val = here & 0xffff;

          if ((here_bits) <= bits) { break; }
          //--- PULLBYTE() ---//
          if (have === 0) { break inf_leave; }
          have--;
          hold += input[next++] << bits;
          bits += 8;
          //---//
        }
        if (here_val < 16) {
          //--- DROPBITS(here.bits) ---//
          hold >>>= here_bits;
          bits -= here_bits;
          //---//
          state.lens[state.have++] = here_val;
        }
        else {
          if (here_val === 16) {
            //=== NEEDBITS(here.bits + 2);
            n = here_bits + 2;
            while (bits < n) {
              if (have === 0) { break inf_leave; }
              have--;
              hold += input[next++] << bits;
              bits += 8;
            }
            //===//
            //--- DROPBITS(here.bits) ---//
            hold >>>= here_bits;
            bits -= here_bits;
            //---//
            if (state.have === 0) {
              strm.msg = 'invalid bit length repeat';
              state.mode = BAD;
              break;
            }
            len = state.lens[state.have - 1];
            copy = 3 + (hold & 0x03);//BITS(2);
            //--- DROPBITS(2) ---//
            hold >>>= 2;
            bits -= 2;
            //---//
          }
          else if (here_val === 17) {
            //=== NEEDBITS(here.bits + 3);
            n = here_bits + 3;
            while (bits < n) {
              if (have === 0) { break inf_leave; }
              have--;
              hold += input[next++] << bits;
              bits += 8;
            }
            //===//
            //--- DROPBITS(here.bits) ---//
            hold >>>= here_bits;
            bits -= here_bits;
            //---//
            len = 0;
            copy = 3 + (hold & 0x07);//BITS(3);
            //--- DROPBITS(3) ---//
            hold >>>= 3;
            bits -= 3;
            //---//
          }
          else {
            //=== NEEDBITS(here.bits + 7);
            n = here_bits + 7;
            while (bits < n) {
              if (have === 0) { break inf_leave; }
              have--;
              hold += input[next++] << bits;
              bits += 8;
            }
            //===//
            //--- DROPBITS(here.bits) ---//
            hold >>>= here_bits;
            bits -= here_bits;
            //---//
            len = 0;
            copy = 11 + (hold & 0x7f);//BITS(7);
            //--- DROPBITS(7) ---//
            hold >>>= 7;
            bits -= 7;
            //---//
          }
          if (state.have + copy > state.nlen + state.ndist) {
            strm.msg = 'invalid bit length repeat';
            state.mode = BAD;
            break;
          }
          while (copy--) {
            state.lens[state.have++] = len;
          }
        }
      }

      /* handle error breaks in while */
      if (state.mode === BAD) { break; }

      /* check for end-of-block code (better have one) */
      if (state.lens[256] === 0) {
        strm.msg = 'invalid code -- missing end-of-block';
        state.mode = BAD;
        break;
      }

      /* build code tables -- note: do not change the lenbits or distbits
         values here (9 and 6) without reading the comments in inftrees.h
         concerning the ENOUGH constants, which depend on those values */
      state.lenbits = 9;

      opts = { bits: state.lenbits };
      ret = inflate_table(LENS, state.lens, 0, state.nlen, state.lencode, 0, state.work, opts);
      // We have separate tables & no pointers. 2 commented lines below not needed.
      // state.next_index = opts.table_index;
      state.lenbits = opts.bits;
      // state.lencode = state.next;

      if (ret) {
        strm.msg = 'invalid literal/lengths set';
        state.mode = BAD;
        break;
      }

      state.distbits = 6;
      //state.distcode.copy(state.codes);
      // Switch to use dynamic table
      state.distcode = state.distdyn;
      opts = { bits: state.distbits };
      ret = inflate_table(DISTS, state.lens, state.nlen, state.ndist, state.distcode, 0, state.work, opts);
      // We have separate tables & no pointers. 2 commented lines below not needed.
      // state.next_index = opts.table_index;
      state.distbits = opts.bits;
      // state.distcode = state.next;

      if (ret) {
        strm.msg = 'invalid distances set';
        state.mode = BAD;
        break;
      }
      //Tracev((stderr, 'inflate:       codes ok\n'));
      state.mode = LEN_;
      if (flush === Z_TREES) { break inf_leave; }
      /* falls through */
    case LEN_:
      state.mode = LEN;
      /* falls through */
    case LEN:
      if (have >= 6 && left >= 258) {
        //--- RESTORE() ---
        strm.next_out = put;
        strm.avail_out = left;
        strm.next_in = next;
        strm.avail_in = have;
        state.hold = hold;
        state.bits = bits;
        //---
        inflate_fast(strm, _out);
        //--- LOAD() ---
        put = strm.next_out;
        output = strm.output;
        left = strm.avail_out;
        next = strm.next_in;
        input = strm.input;
        have = strm.avail_in;
        hold = state.hold;
        bits = state.bits;
        //---

        if (state.mode === TYPE) {
          state.back = -1;
        }
        break;
      }
      state.back = 0;
      for (;;) {
        here = state.lencode[hold & ((1 << state.lenbits) - 1)];  /*BITS(state.lenbits)*/
        here_bits = here >>> 24;
        here_op = (here >>> 16) & 0xff;
        here_val = here & 0xffff;

        if (here_bits <= bits) { break; }
        //--- PULLBYTE() ---//
        if (have === 0) { break inf_leave; }
        have--;
        hold += input[next++] << bits;
        bits += 8;
        //---//
      }
      if (here_op && (here_op & 0xf0) === 0) {
        last_bits = here_bits;
        last_op = here_op;
        last_val = here_val;
        for (;;) {
          here = state.lencode[last_val +
                  ((hold & ((1 << (last_bits + last_op)) - 1))/*BITS(last.bits + last.op)*/ >> last_bits)];
          here_bits = here >>> 24;
          here_op = (here >>> 16) & 0xff;
          here_val = here & 0xffff;

          if ((last_bits + here_bits) <= bits) { break; }
          //--- PULLBYTE() ---//
          if (have === 0) { break inf_leave; }
          have--;
          hold += input[next++] << bits;
          bits += 8;
          //---//
        }
        //--- DROPBITS(last.bits) ---//
        hold >>>= last_bits;
        bits -= last_bits;
        //---//
        state.back += last_bits;
      }
      //--- DROPBITS(here.bits) ---//
      hold >>>= here_bits;
      bits -= here_bits;
      //---//
      state.back += here_bits;
      state.length = here_val;
      if (here_op === 0) {
        //Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
        //        "inflate:         literal '%c'\n" :
        //        "inflate:         literal 0x%02x\n", here.val));
        state.mode = LIT;
        break;
      }
      if (here_op & 32) {
        //Tracevv((stderr, "inflate:         end of block\n"));
        state.back = -1;
        state.mode = TYPE;
        break;
      }
      if (here_op & 64) {
        strm.msg = 'invalid literal/length code';
        state.mode = BAD;
        break;
      }
      state.extra = here_op & 15;
      state.mode = LENEXT;
      /* falls through */
    case LENEXT:
      if (state.extra) {
        //=== NEEDBITS(state.extra);
        n = state.extra;
        while (bits < n) {
          if (have === 0) { break inf_leave; }
          have--;
          hold += input[next++] << bits;
          bits += 8;
        }
        //===//
        state.length += hold & ((1 << state.extra) - 1)/*BITS(state.extra)*/;
        //--- DROPBITS(state.extra) ---//
        hold >>>= state.extra;
        bits -= state.extra;
        //---//
        state.back += state.extra;
      }
      //Tracevv((stderr, "inflate:         length %u\n", state.length));
      state.was = state.length;
      state.mode = DIST;
      /* falls through */
    case DIST:
      for (;;) {
        here = state.distcode[hold & ((1 << state.distbits) - 1)];/*BITS(state.distbits)*/
        here_bits = here >>> 24;
        here_op = (here >>> 16) & 0xff;
        here_val = here & 0xffff;

        if ((here_bits) <= bits) { break; }
        //--- PULLBYTE() ---//
        if (have === 0) { break inf_leave; }
        have--;
        hold += input[next++] << bits;
        bits += 8;
        //---//
      }
      if ((here_op & 0xf0) === 0) {
        last_bits = here_bits;
        last_op = here_op;
        last_val = here_val;
        for (;;) {
          here = state.distcode[last_val +
                  ((hold & ((1 << (last_bits + last_op)) - 1))/*BITS(last.bits + last.op)*/ >> last_bits)];
          here_bits = here >>> 24;
          here_op = (here >>> 16) & 0xff;
          here_val = here & 0xffff;

          if ((last_bits + here_bits) <= bits) { break; }
          //--- PULLBYTE() ---//
          if (have === 0) { break inf_leave; }
          have--;
          hold += input[next++] << bits;
          bits += 8;
          //---//
        }
        //--- DROPBITS(last.bits) ---//
        hold >>>= last_bits;
        bits -= last_bits;
        //---//
        state.back += last_bits;
      }
      //--- DROPBITS(here.bits) ---//
      hold >>>= here_bits;
      bits -= here_bits;
      //---//
      state.back += here_bits;
      if (here_op & 64) {
        strm.msg = 'invalid distance code';
        state.mode = BAD;
        break;
      }
      state.offset = here_val;
      state.extra = (here_op) & 15;
      state.mode = DISTEXT;
      /* falls through */
    case DISTEXT:
      if (state.extra) {
        //=== NEEDBITS(state.extra);
        n = state.extra;
        while (bits < n) {
          if (have === 0) { break inf_leave; }
          have--;
          hold += input[next++] << bits;
          bits += 8;
        }
        //===//
        state.offset += hold & ((1 << state.extra) - 1)/*BITS(state.extra)*/;
        //--- DROPBITS(state.extra) ---//
        hold >>>= state.extra;
        bits -= state.extra;
        //---//
        state.back += state.extra;
      }
//#ifdef INFLATE_STRICT
      if (state.offset > state.dmax) {
        strm.msg = 'invalid distance too far back';
        state.mode = BAD;
        break;
      }
//#endif
      //Tracevv((stderr, "inflate:         distance %u\n", state.offset));
      state.mode = MATCH;
      /* falls through */
    case MATCH:
      if (left === 0) { break inf_leave; }
      copy = _out - left;
      if (state.offset > copy) {         /* copy from window */
        copy = state.offset - copy;
        if (copy > state.whave) {
          if (state.sane) {
            strm.msg = 'invalid distance too far back';
            state.mode = BAD;
            break;
          }
// (!) This block is disabled in zlib defailts,
// don't enable it for binary compatibility
//#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
//          Trace((stderr, "inflate.c too far\n"));
//          copy -= state.whave;
//          if (copy > state.length) { copy = state.length; }
//          if (copy > left) { copy = left; }
//          left -= copy;
//          state.length -= copy;
//          do {
//            output[put++] = 0;
//          } while (--copy);
//          if (state.length === 0) { state.mode = LEN; }
//          break;
//#endif
        }
        if (copy > state.wnext) {
          copy -= state.wnext;
          from = state.wsize - copy;
        }
        else {
          from = state.wnext - copy;
        }
        if (copy > state.length) { copy = state.length; }
        from_source = state.window;
      }
      else {                              /* copy from output */
        from_source = output;
        from = put - state.offset;
        copy = state.length;
      }
      if (copy > left) { copy = left; }
      left -= copy;
      state.length -= copy;
      do {
        output[put++] = from_source[from++];
      } while (--copy);
      if (state.length === 0) { state.mode = LEN; }
      break;
    case LIT:
      if (left === 0) { break inf_leave; }
      output[put++] = state.length;
      left--;
      state.mode = LEN;
      break;
    case CHECK:
      if (state.wrap) {
        //=== NEEDBITS(32);
        while (bits < 32) {
          if (have === 0) { break inf_leave; }
          have--;
          // Use '|' insdead of '+' to make sure that result is signed
          hold |= input[next++] << bits;
          bits += 8;
        }
        //===//
        _out -= left;
        strm.total_out += _out;
        state.total += _out;
        if (_out) {
          strm.adler = state.check =
              /*UPDATE(state.check, put - _out, _out);*/
              (state.flags ? crc32(state.check, output, _out, put - _out) : adler32(state.check, output, _out, put - _out));

        }
        _out = left;
        // NB: crc32 stored as signed 32-bit int, zswap32 returns signed too
        if ((state.flags ? hold : zswap32(hold)) !== state.check) {
          strm.msg = 'incorrect data check';
          state.mode = BAD;
          break;
        }
        //=== INITBITS();
        hold = 0;
        bits = 0;
        //===//
        //Tracev((stderr, "inflate:   check matches trailer\n"));
      }
      state.mode = LENGTH;
      /* falls through */
    case LENGTH:
      if (state.wrap && state.flags) {
        //=== NEEDBITS(32);
        while (bits < 32) {
          if (have === 0) { break inf_leave; }
          have--;
          hold += input[next++] << bits;
          bits += 8;
        }
        //===//
        if (hold !== (state.total & 0xffffffff)) {
          strm.msg = 'incorrect length check';
          state.mode = BAD;
          break;
        }
        //=== INITBITS();
        hold = 0;
        bits = 0;
        //===//
        //Tracev((stderr, "inflate:   length matches trailer\n"));
      }
      state.mode = DONE;
      /* falls through */
    case DONE:
      ret = Z_STREAM_END;
      break inf_leave;
    case BAD:
      ret = Z_DATA_ERROR;
      break inf_leave;
    case MEM:
      return Z_MEM_ERROR;
    case SYNC:
      /* falls through */
    default:
      return Z_STREAM_ERROR;
    }
  }

  // inf_leave <- here is real place for "goto inf_leave", emulated via "break inf_leave"

  /*
     Return from inflate(), updating the total counts and the check value.
     If there was no progress during the inflate() call, return a buffer
     error.  Call updatewindow() to create and/or update the window state.
     Note: a memory error from inflate() is non-recoverable.
   */

  //--- RESTORE() ---
  strm.next_out = put;
  strm.avail_out = left;
  strm.next_in = next;
  strm.avail_in = have;
  state.hold = hold;
  state.bits = bits;
  //---

  if (state.wsize || (_out !== strm.avail_out && state.mode < BAD &&
                      (state.mode < CHECK || flush !== Z_FINISH))) {
    if (updatewindow(strm, strm.output, strm.next_out, _out - strm.avail_out)) {
      state.mode = MEM;
      return Z_MEM_ERROR;
    }
  }
  _in -= strm.avail_in;
  _out -= strm.avail_out;
  strm.total_in += _in;
  strm.total_out += _out;
  state.total += _out;
  if (state.wrap && _out) {
    strm.adler = state.check = /*UPDATE(state.check, strm.next_out - _out, _out);*/
      (state.flags ? crc32(state.check, output, _out, strm.next_out - _out) : adler32(state.check, output, _out, strm.next_out - _out));
  }
  strm.data_type = state.bits + (state.last ? 64 : 0) +
                    (state.mode === TYPE ? 128 : 0) +
                    (state.mode === LEN_ || state.mode === COPY_ ? 256 : 0);
  if (((_in === 0 && _out === 0) || flush === Z_FINISH) && ret === Z_OK) {
    ret = Z_BUF_ERROR;
  }
  return ret;
}

function inflateEnd(strm) {

  if (!strm || !strm.state /*|| strm->zfree == (free_func)0*/) {
    return Z_STREAM_ERROR;
  }

  var state = strm.state;
  if (state.window) {
    state.window = null;
  }
  strm.state = null;
  return Z_OK;
}

function inflateGetHeader(strm, head) {
  var state;

  /* check state */
  if (!strm || !strm.state) { return Z_STREAM_ERROR; }
  state = strm.state;
  if ((state.wrap & 2) === 0) { return Z_STREAM_ERROR; }

  /* save header structure */
  state.head = head;
  head.done = false;
  return Z_OK;
}

function inflateSetDictionary(strm, dictionary) {
  var dictLength = dictionary.length;

  var state;
  var dictid;
  var ret;

  /* check state */
  if (!strm /* == Z_NULL */ || !strm.state /* == Z_NULL */) { return Z_STREAM_ERROR; }
  state = strm.state;

  if (state.wrap !== 0 && state.mode !== DICT) {
    return Z_STREAM_ERROR;
  }

  /* check for correct dictionary identifier */
  if (state.mode === DICT) {
    dictid = 1; /* adler32(0, null, 0)*/
    /* dictid = adler32(dictid, dictionary, dictLength); */
    dictid = adler32(dictid, dictionary, dictLength, 0);
    if (dictid !== state.check) {
      return Z_DATA_ERROR;
    }
  }
  /* copy dictionary to window using updatewindow(), which will amend the
   existing dictionary if appropriate */
  ret = updatewindow(strm, dictionary, dictLength, dictLength);
  if (ret) {
    state.mode = MEM;
    return Z_MEM_ERROR;
  }
  state.havedict = 1;
  // Tracev((stderr, "inflate:   dictionary set\n"));
  return Z_OK;
}

exports.inflateReset = inflateReset;
exports.inflateReset2 = inflateReset2;
exports.inflateResetKeep = inflateResetKeep;
exports.inflateInit = inflateInit;
exports.inflateInit2 = inflateInit2;
exports.inflate = inflate;
exports.inflateEnd = inflateEnd;
exports.inflateGetHeader = inflateGetHeader;
exports.inflateSetDictionary = inflateSetDictionary;
exports.inflateInfo = 'pako inflate (from Nodeca project)';

/* Not implemented
exports.inflateCopy = inflateCopy;
exports.inflateGetDictionary = inflateGetDictionary;
exports.inflateMark = inflateMark;
exports.inflatePrime = inflatePrime;
exports.inflateSync = inflateSync;
exports.inflateSyncPoint = inflateSyncPoint;
exports.inflateUndermine = inflateUndermine;
*/