license: Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to you under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

       http://www.apache.org/licenses/LICENSE-2.0

     Unless required by applicable law or agreed to in writing,
     software distributed under the License is distributed on an
     "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
     KIND, either express or implied.  See the License for the
     specific language governing permissions and limitations
     under the License.

The Command-line Interface

This guide shows you how to create applications and deploy them to various native mobile platforms using the cordova command-line interface (CLI). This tool allows you to create new projects, build them on different platforms, and run them within an emulator. You can also use the CLI to initialize project code, after which you use various platforms' SDKs to develop them further.

Prerequisites

Before running any command-line tools, you need to install SDKs for each platform you wish to target. (See the Platform Guides for more details.)

To add support or rebuild a project for any platform, you need to run the command-line interface from the same machine that supports the platform's SDK. The CLI supports the following combinations:

  • iOS (Mac)
  • Android (Mac, Linux)
  • BlackBerry (Mac, Windows)
  • Windows Phone 7 (Windows)
  • Windows Phone 8 (Windows)

On the Mac, the command-line is available via the Terminal application. On the PC, it's available as Command Prompt under Accessories.

The more likely it is that you run the CLI from different machines, the more it makes sense to maintain a remote source code repository, whose assets you pull down to local working directories.

To install the cordova command-line tool, follow these steps:

  1. Download and install Node.js. Following installation, you should be able to invoke node or npm on your command line.

  2. Install the cordova utility. In Unix, prefixing the additional sudo command may be necessary to install development utilities in otherwise restricted directories:

     $ sudo npm install -g cordova

    The installation log may produce errors for any uninstalled platform SDKs. Following installation, you should be able to run cordova on the command line.

Create the App

Go to the directory where you maintain your source code, and run a command such as the following:

    $ cordova create HelloWorld com.example.hello "Hello World"

The first argument specifies a HelloWorld directory to be generated for your project. Its www subdirectory houses your application's home page, along with various resources under css, js, and img, which follow common web development file-naming conventions. The config.xml file contains important metadata needed to generate and distribute the application.

The other two arguments are optional: the com.example.hello argument provides your project with a reverse domain-style identifier, and the "Hello World!" provides the application's display text. You can edit both of these values later in the config.xml file.

Add Platforms

All subsequent commands need to be run within the project's directory, or any subdirectories within its scope:

    $ cd HelloWorld

Before you can build the project, you need to specify a set of target platforms. Your ability to run these commands depends on whether your machine supports each SDK, and whether you have already installed each SDK. Run any of these from a Mac:

    $ cordova platform add ios
    $ cordova platform add android
    $ cordova platform add blackberry

Run any of these from a Windows machine, where wp refers to different versions of the Windows Phone operating system:

    $ cordova platform add wp7
    $ cordova platform add wp8
    $ cordova platform add android
    $ cordova platform add blackberry

Run this to check your current set of platforms:

    $ cordova platforms ls

(Note the platform and platforms commands are synonymous.)

Run either of the following synonymous commands to remove a platform:

    $ cordova platform remove blackberry
    $ cordova platform rm android

Running commands to add or remove platforms affects the contents of the project‘s platforms directory, where each specified platform appears as a subdirectory. The www source directory is reproduced within each platform’s subdirectory, appearing for example in platforms/ios/www or platforms/android/assets/www. By default, each platform‘s configuration file is set up to be able to access all of Cordova’s APIs.

If you wish, you can use an SDK at this point to open the project you created. However, any edits you make to the project within an SDK affect the derivative set of assets, not the original cross-platform source files. Use this approach if you simply want to initialize a project. (See the Platform Guides for information on how to develop applications within each SDK.) Read on if you wish to use command-line tools for the entire development cycle.

Build the App

By default, the cordova create script generates a skeletal web-based application whose home page is the project's www/index.html file. Edit this application however you want, but any initialization should be specified as part of the deviceready event handler, referenced by default from www/js/index.js.

Run the following command to iteratively build the project:

    $ cordova build

This generates platform-specific code within the project's platforms subdirectory. You can optionally limit the scope of each build to specific platforms:

    $ cordova build ios

The cordova build command is a shorthand for the following, which in this example is also targeted to a single platform:

    $ cordova prepare ios
    $ cordova compile ios

In this case, once you run prepare, you can use Apple‘s Xcode SDK as an alternative to modify and compile the platform-specific code that Cordova generates within platforms/ios. You can use the same approach with other platforms’ SDKs.

View the App in an Emulator

SDKs for mobile platforms often come bundled with emulators that execute a device image, so that you can launch the app from the home screen and see how it interacts with many platform features. Run a command such as the following to rebuild the app and view it within a specific platform's emulator:

    $ cordova emulate android

Some mobile platforms emulate a particular device by default, such as the iPhone for iOS projects. For other platforms, you may need to first associate a device with an emulator. (See the Platform Guides for details.) For example, you may first run the android command to launch the Android SDK, then run a particular device image, which launches it according to its default behavior:

Following up with the cordova emulate command refreshes the emulator image to display the latest application, which is now available for launch from the home screen:

Add Features

When you build and view a new project, the default application that appears doesn't do very much. You can modify the app in many ways to take advantage of standard web technologies, but for the app to communicate closely with various device-level features, you need to add plugins that provide access to core Cordova APIs.

A plugin is a bit of add-on code that provides an interface to native components. You can design your own plugin interface, for example when designing a hybrid app that mixes a Cordova WebView with native components. (See Embedding WebViews and Plugin Development Guide for details.) More commonly, you would add a plugin to enable one of Cordova's basic device-level features

detailed in the API Reference.

The cordova plugin add command requires you to specify the repository for the plugin code. Here are examples of features you might add:

Use plugin ls (or plugin list) to view currently installed plugins. Each displays by its identifier:

$ cordova plugin ls    # or 'plugin list'
[ 'org.apache.cordova.core.console' ]

To remove a plugin, refer to it by the same identifier that appears in the listing. For example, here is how you would remove support for a debug console from a release version:

$ cordova plugin rm org.apache.cordova.core.console        
$ cordova plugin remove org.apache.cordova.core.console    # same

You can batch-remove or add plugins by specifying more than one argument for each command.

Update the App

After installing installing the cordova utility, you can always update it to the latest version by running the following command:

    $ sudo npm update -g cordova

Use this syntax to install a specific version:

    $ sudo npm install -g cordova@2.8.0

Run the info command for a listing that includes the current version along with other available version numbers:

    $ npm info cordova